Search Results

Search found 17735 results on 710 pages for 'drag event'.

Page 1/710 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Super Joybox 5 HID 0925:8884 not recognized as joystick in Ubuntu 12.04 LTS

  - by Tim Evans

  Problem: When using the "Super JoyBox 5" 4 port playstation 2 to USB adapter, the device is not recognized as a joystick. there is no js0 created, but instead another input eventX and mouseX are created in /dev/input. When using the directional buttons (up down left right) on a Playstation 1 controller attached to the device, the mouse cursor moves to the top, bottom, left, and right edges of the screen respectively. Buttons are unresponsive. The joypads attached to the device cannot be used in any games or other programs. Attempted remedies: Creating a symlink from the eventX to js0 does not solve the problem. Addl Info: joydev is loaded and running peroperly according to LSMOD. evtest can be run on the created eventX (sudo evtest /dev/input/event14 in my case) and the buttons and axes all register inputs. Here is a paste of EVTEST's diagnostic and the first couple button events. [code] sudo evtest /dev/input/event14 Input driver version is 1.0.1 Input device ID: bus 0x3 vendor 0x925 product 0x8884 version 0x100 Input device name: "HID 0925:8884" Supported events: Event type 0 (EV_SYN) Event type 1 (EV_KEY) Event code 288 (BTN_TRIGGER) Event code 289 (BTN_THUMB) Event code 290 (BTN_THUMB2) Event code 291 (BTN_TOP) Event code 292 (BTN_TOP2) Event code 293 (BTN_PINKIE) Event code 294 (BTN_BASE) Event code 295 (BTN_BASE2) Event code 296 (BTN_BASE3) Event code 297 (BTN_BASE4) Event code 298 (BTN_BASE5) Event code 299 (BTN_BASE6) Event code 300 (?) Event code 301 (?) Event code 302 (?) Event code 303 (BTN_DEAD) Event code 304 (BTN_A) Event code 305 (BTN_B) Event code 306 (BTN_C) Event code 307 (BTN_X) Event code 308 (BTN_Y) Event code 309 (BTN_Z) Event code 310 (BTN_TL) Event code 311 (BTN_TR) Event code 312 (BTN_TL2) Event code 313 (BTN_TR2) Event code 314 (BTN_SELECT) Event code 315 (BTN_START) Event code 316 (BTN_MODE) Event code 317 (BTN_THUMBL) Event code 318 (BTN_THUMBR) Event code 319 (?) Event code 320 (BTN_TOOL_PEN) Event code 321 (BTN_TOOL_RUBBER) Event code 322 (BTN_TOOL_BRUSH) Event code 323 (BTN_TOOL_PENCIL) Event code 324 (BTN_TOOL_AIRBRUSH) Event code 325 (BTN_TOOL_FINGER) Event code 326 (BTN_TOOL_MOUSE) Event code 327 (BTN_TOOL_LENS) Event code 328 (?) Event code 329 (?) Event code 330 (BTN_TOUCH) Event code 331 (BTN_STYLUS) Event code 332 (BTN_STYLUS2) Event code 333 (BTN_TOOL_DOUBLETAP) Event code 334 (BTN_TOOL_TRIPLETAP) Event code 335 (BTN_TOOL_QUADTAP) Event type 3 (EV_ABS) Event code 0 (ABS_X) Value 127 Min 0 Max 255 Flat 15 Event code 1 (ABS_Y) Value 127 Min 0 Max 255 Flat 15 Event code 2 (ABS_Z) Value 127 Min 0 Max 255 Flat 15 Event code 3 (ABS_RX) Value 127 Min 0 Max 255 Flat 15 Event code 4 (ABS_RY) Value 127 Min 0 Max 255 Flat 15 Event code 5 (ABS_RZ) Value 127 Min 0 Max 255 Flat 15 Event code 6 (ABS_THROTTLE) Value 127 Min 0 Max 255 Flat 15 Event code 7 (ABS_RUDDER) Value 127 Min 0 Max 255 Flat 15 Event code 8 (ABS_WHEEL) Value 127 Min 0 Max 255 Flat 15 Event code 9 (ABS_GAS) Value 127 Min 0 Max 255 Flat 15 Event code 10 (ABS_BRAKE) Value 127 Min 0 Max 255 Flat 15 Event code 11 (?) Value 127 Min 0 Max 255 Flat 15 Event code 12 (?) Value 127 Min 0 Max 255 Flat 15 Event code 13 (?) Value 127 Min 0 Max 255 Flat 15 Event code 14 (?) Value 127 Min 0 Max 255 Flat 15 Event code 15 (?) Value 127 Min 0 Max 255 Flat 15 Event code 16 (ABS_HAT0X) Value 0 Min -1 Max 1 Event code 17 (ABS_HAT0Y) Value 0 Min -1 Max 1 Event code 18 (ABS_HAT1X) Value 0 Min -1 Max 1 Event code 19 (ABS_HAT1Y) Value 0 Min -1 Max 1 Event code 20 (ABS_HAT2X) Value 0 Min -1 Max 1 Event code 21 (ABS_HAT2Y) Value 0 Min -1 Max 1 Event code 22 (ABS_HAT3X) Value 0 Min -1 Max 1 Event code 23 (ABS_HAT3Y) Value 0 Min -1 Max 1 Event type 4 (EV_MSC) Event code 4 (MSC_SCAN) Testing ... (interrupt to exit) Event: time 1351223176.126127, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90001 Event: time 1351223176.126130, type 1 (EV_KEY), code 288 (BTN_TRIGGER), value 1 Event: time 1351223176.126166, -------------- SYN_REPORT ------------ Event: time 1351223178.238127, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90001 Event: time 1351223178.238130, type 1 (EV_KEY), code 288 (BTN_TRIGGER), value 0 Event: time 1351223178.238167, -------------- SYN_REPORT ------------ Event: time 1351223180.422127, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90002 Event: time 1351223180.422129, type 1 (EV_KEY), code 289 (BTN_THUMB), value 1 Event: time 1351223180.422163, -------------- SYN_REPORT ------------ Event: time 1351223181.558099, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90002 Event: time 1351223181.558102, type 1 (EV_KEY), code 289 (BTN_THUMB), value 0 Event: time 1351223181.558137, -------------- SYN_REPORT ------------ Event: time 1351223182.486137, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90003 Event: time 1351223182.486140, type 1 (EV_KEY), code 290 (BTN_THUMB2), value 1 Event: time 1351223182.486172, -------------- SYN_REPORT ------------ Event: time 1351223183.302130, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90003 Event: time 1351223183.302132, type 1 (EV_KEY), code 290 (BTN_THUMB2), value 0 Event: time 1351223183.302165, -------------- SYN_REPORT ------------ Event: time 1351223184.030133, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90004 Event: time 1351223184.030136, type 1 (EV_KEY), code 291 (BTN_TOP), value 1 Event: time 1351223184.030166, -------------- SYN_REPORT ------------ Event: time 1351223184.558135, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90004 Event: time 1351223184.558138, type 1 (EV_KEY), code 291 (BTN_TOP), value 0 Event: time 1351223184.558168, -------------- SYN_REPORT ------------ [/code] The directional buttons on the pad are being identified as HAT0Y and HAT0X axes, thats zero, not the letter O. Aparently, this device used to work flawlessly on kernel 2.4.x systems, and even as late as ubunto 10.04. Perhaps the Joydev rules for identifying joypads has changed? Currently, this kind of bug is affecting a few different type of controller adapters, but since this is the one that i PERSONALLY have (and has been driving me my own special brand of crazy), its the one im documenting. What i think should be happening instead: The device should be registering js0 through js3, one for each port, or JS0 that will handle all of the connected devices with different numbered axes for each connected joypad. Either way, it should work as a joystick and stop controlling the mouse cursor. Please help!

  Read the article

• JQuery-UI Drag, Drop and Re-Drag Clones on Re-Drag

  - by amarcy

  I am using the following code to extend the JQuery-UI demos included with the download. I am trying to set up a container that the user can drag items into and then move the items around within the container. I incorporated the answer from http://stackoverflow.com/questions/867469/jquery-draggable-clone which works with one problem. <script> $(document).ready(function() { $("#droppable").droppable({ accept: '.ui-widget-content', drop: function(event, ui) { if($(ui).parent(":not(:has(#id1))")){ $(this).append($(ui.helper).clone().attr("id", "id1")); } $("#id1").draggable({ containment: 'parent', }); } }); $(".ui-widget-content").draggable({helper: 'clone'}); }); </script> div class="demo"> <div id="draggable" class="ui-widget-content"> <p>Drag me around</p> </div> <div id="droppable" class="ui-widget-header"> <p>Drop here</p> </div> When an item is dropped onto the droppable container it can be dragged one time and when it is dropped after that drag it loses its dragging capability. How do I allow for the item to be dragged multiple times after it has been added to the droppable container?

  Read the article

• Using Native Drag and Drop in HTML 5 pages

  - by nikolaosk

  This is going to be the eighth post in a series of posts regarding HTML 5. You can find the other posts here, here , here , here, here , here and here. In this post I will show you how to implement Drag and Drop functionality in an HTML 5 page using JQuery.This is a great functionality and we do not need to resort anymore to plugins like Silverlight and Flash to achieve this great feature. This is also called a native approach on Drag and Drop.I will use some events and I will write code to respond when these events are fired.As I said earlier we need to write Javascript to implement the drag and drop functionality. I will use the very popular JQuery Library. Please download the library (minified version) from http://jquery.com/downloadI will create a simple HTML page.There will be two thumbnails pics on it. There will also be the drag and drop area where the user will drag the thumb pics into it and they will resize to their actual size. The HTML markup for the page follows<!doctype html><html lang="en"><head><title>Liverpool Legends Gallery</title><meta charset="utf-8"><link rel="stylesheet" type="text/css" href="style.css"><script type="text/javascript" charset="utf-8" src="jquery-1.8.1.min.js"></script>  <script language="JavaScript" src="drag.js"></script>   </head><body><header><h1>A page dedicated to Liverpool Legends</h1><h2>Drag and Drop the thumb image in the designated area to see the full image</h2></header><div id="main"><img src="thumbs/steven-gerrard.jpg"  big="large-images/steven-gerrard-large.jpg" alt="John Barnes"><img src="thumbs/robbie-fowler.jpg" big="large-images/robbie-fowler-large.jpg" alt="Ian Rush"><div id="drag"><p>Drop your image here</p> </div></body></html> There is nothing difficult or fancy in the HTML markup above. I have a link to the external JQuery library and another javascript file that I will implement the whole drag and drop functionality.The code for the css file (style.css) follows#main{  float: left;  width: 340px;  margin-right: 30px;}#drag{  float: left;  width: 400px;  height:300px;  background-color: #c0c0c0;}These are simple CSS rules. This post cannot be a tutorial on CSS.For all these posts I assume that you have the basic HTML,CSS,Javascript skills.Now I am going to create a javascript file (drag.js) to implement the drag and drop functionality.I will provide the whole code for the drag.js file and then I will explain what I am doing in each step.$(function() {          var players = $('#main img');          players.attr('draggable', 'true');                    players.bind('dragstart', function(event) {              var data = event.originalEvent.dataTransfer;               var src = $(this).attr("big");              data.setData("Text", src);               return true;          });          var target = $('#drag');          target.bind('drop', function(event) {            var data = event.originalEvent.dataTransfer;            var src = ( data.getData('Text') );                         var img = $("<img></img>").attr("src", src);            $(this).html(img);            if (event.preventDefault) event.preventDefault();            return(false);          });                   target.bind('dragover', function(event) {                if (event.preventDefault) event.preventDefault();            return false;          });           players.bind('dragend', function(event) {             if (event.preventDefault) event.preventDefault();             return false;           });        });   In these lines var players = $('#main img'); players.attr('draggable', 'true');We grab all the images in the #main div and store them in a variable and then make them draggable.Then in following lines I am using the dragstart event.  players.bind('dragstart', function(event) {              var data = event.originalEvent.dataTransfer;               var src = $(this).attr("big");              data.setData("Text", src);               return true;          }); In this event I am associating the custom data attribute value with the item I am dragging.Then I create a variable to get hold of the dropping area var target = $('#drag'); Then in the following lines I implement the drop event and what happens when the user drops the image in the designated area on the page. target.bind('drop', function(event) {            var data = event.originalEvent.dataTransfer;            var src = ( data.getData('Text') );                         var img = $("<img></img>").attr("src", src);            $(this).html(img);            if (event.preventDefault) event.preventDefault();            return(false);          }); The dragend  event is fired when the user has finished the drag operation        players.bind('dragend', function(event) {             if (event.preventDefault) event.preventDefault();             return false;           }); When this method event.preventDefault() is called , the default action of the event will not be triggered.Please have a look a the picture below to see how the page looks before the drag and drop takes place. Then simply I drag and drop a picture in the dropping area.Have a look at the picture below It works!!! Hope it helps!!  

  Read the article

• Manual drag-drop operations in Flex

  - by Yarin

  This is a two-part problem: A) I'm implementing several irregular drag-drop operations in Flex (e.g. DataGrid ItemRenderer into Tree). My preference was modifying DragManager operations to meet my needs, and in fact using DragManager allows me to do everything I need, but I'm having serious issues with performance. For example, dragging anything over a many-columned DataGrid, whether the drag was initiated with DragManager.doDrag, or just using native ListBase drag-drop functionality, slows the drag movement to a crawl. Even if the DataGrid is disabled/ not listenening for any move/drag events, this happens. On the other hand, if the drag is initiated by calling .startDrag() on the Sprite, the drag is smooth and performs great over DataGrids and everything else. So part A would be: Is there a reason why .startDrag() operations work so well, while drags initiated through DragManager.doDrag suffer so badly when over certain components? B) If indeed the solution is to handle drag-drops using .startDrag(), how would I go about determining what component the mouse is over when the drag is released? In my example, my dragged object is brought up to the top level of the display list, and so is being moved around in stage coordinates. mouseMove, mouseOver events don't fire on the components I'm dragging over because the mouse is constantly over the dragged component, so I would need some sort of stage.coordinate - visibleComponentAtThatCoordinate conversion. Any thoughts on this? Thanks alot!-- Yarin

  Read the article

• In Javascript event handling, why "return false" or "event.preventDefault()" and "stopping the event

  - by Jian Lin

  It is said that when we handle a "click event", returning false or calling event.preventDefault() makes a difference, in which the difference is that preventDefault will only prevent the default event action to occur, i.e. a page redirect on a link click, a form submission, etc. and return false will also stop the event flow. Does that mean, if the click event is registered several times for several actions, using $('#clickme').click(function() { … }) returning false will stop the other handlers from running? I am on a Mac now and so can only use Firefox and Chrome but not IE, which has a different event model, and tested it on FF and Chrome and all 3 handlers ran without any stopping…. so what is the real difference, or, is there a situation where "stopping the event flow" is not desirable? this is related to http://stackoverflow.com/questions/3042036/using-jquerys-animate-if-the-clicked-on-element-is-a-href-a and http://stackoverflow.com/questions/2017755/whats-the-difference-between-e-preventdefault-and-return-false

  Read the article

• Query specific logs from event log using nxlog

  - by user170899

  Below is my nxlog configuration define ROOT C:\Program Files (x86)\nxlog Moduledir %ROOT%\modules CacheDir %ROOT%\data Pidfile %ROOT%\data\nxlog.pid SpoolDir %ROOT%\data LogFile %ROOT%\data\nxlog.log <Extension json> Module xm_json </Extension> <Input internal> Module im_internal </Input> <Input eventlog> Module im_msvistalog Query <QueryList>\ <Query Id="0">\ <Select Path="Security">*</Select>\ </Query>\ </QueryList> </Input> <Output out> Module om_tcp Host localhost Port 3515 Exec $EventReceivedTime = integer($EventReceivedTime) / 1000000; \ to_json(); </Output> <Route 1> Path eventlog, internal => out </Route> <Select Path="Security">*</Select>\ - * gets everything from the Security log, but my requirement is to get specific logs starting with EventId - 4663. How do i do this? Please help. Thanks.

  Read the article

• Trackpad Drag lock pissing me off with Windows 7

  - by rockinthesixstring

  This is driving me insane and I've scowered the web for two days trying to fix this. I just picked up an Apple Magic Trackpad to be used exclusively on a Windows 7 PC (not apple with bootcamp). I found a nice driver that got it working right away, but when I'm moving the cursor around the screen, often it will begin "highlighting" text, or picking up and dragging things I don't want it to. I looked in the "regedit" where people are saying there is binary that can be changed, however the driver I installed doesn't use the binary being suggested. Can anyone suggest a better driver for my situation or a way to disable the drag lock that is driving me so nuts? I don't mind not being able to lift my finger when dragging, it's a far better compromise than having the insane feature.

  Read the article

• Drag lock crisis with Windows 7 and Apple Magic Trackpad

  - by rockinthesixstring

  This is driving me insane and I've scowered the web for two days trying to fix this. I just picked up an Apple Magic Trackpad to be used exclusively on a Windows 7 PC (not apple with bootcamp). I found a nice driver that got it working right away, but when I'm moving the cursor around the screen, often it will begin "highlighting" text, or picking up and dragging things I don't want it to. I looked in the "regedit" where people are saying there is binary that can be changed, however the driver I installed doesn't use the binary being suggested. Can anyone suggest a better driver for my situation or a way to disable the drag lock that is driving me so nuts? I don't mind not being able to lift my finger when dragging, it's a far better compromise than having the insane feature.

  Read the article

• Attached event triggering if event is same as current event

  - by Psytronic

  I have a button which start/stops a timer. When I click it, I remove the current event handler, and attach the opposite one. Ie, click "Stop", and the "Start" function is attached for the next click. However in IE (7), not sure about 8. The newly attached event is also triggering after the original function is finished: Lifeline in IE7: Button pushed -- "Stop" function begins -- "Stop" function removed -- "Start" function attached -- "Stop" function finishes -- "Start" function is called. I know it's to do with the attaching event bit, because If I remove it, the Start event doesn't fire. This seems a bit odd, as I have the same situation in the "Start" function, ie, "Start" removed, "Stop" called. But this doesn't seem to cause an infinite loop, thankfully. if(btn.attachEvent){ btn.detachEvent("onclick", stop); btn.attachEvent("onclick", start); }else if(btn.addEventListener){ btn.removeEventListener("click", stop, true); btn.addEventListener("click", start , true); } It all works fine in FF and Chrome. I have switched the order of attach/detach, just to see if it makes a difference, but it doesn't. Addendum Sorry, and no answers involving jQuery, Protoype et al. Its not something I want to integrate for this project.

  Read the article

• Call a function when "event.GetFrom(m_cpVoice)==S_OK" (ergo when event happens) [SAPI 5.1 and C++]

  - by Jesuskiewicz

  Hello, I'm doing a project with a 3D model, that speaks. So, I'm using SAPI 5.1, and I want to call a function asynchronously when there's a Viseme event (in order to play the animation related to). How could I do it? Thank you very much. Note: I use : hRes = m_cpVoice-Speak(L"All I want is to solve this problem", SPF_ASYNC , NULL); And I know the CspEvent, event.eEventId . All I want is how to call a function when Sapi event happens

  Read the article

• Click and Drag from Clickpad stops working after a while 12.04

  - by Jason O'Neil

  I've got a Samsung Notebook (NP-QX412-S01AU) with a touchpad / clickpad. I'm running 12.04 Precise. When I first log into my computer, the touchpad behaves exactly as expected and desired. The longer I stay logged in, it slowly degrades. I'll try describe it. There are 3 ways of "dragging" on this clickpad: (Physical) click and hold with one finger, and drag around while still holding it down. All with one finger. (Physical) Click and hold with one finger, then with another finger drag around to move cursor. Double tap (not a physical click) and on the second tap, hold and drag. I most naturally use option 1, but here's how it works: When I first turn on, options 1, 2 and 3 all work. After a while, only options 2 and 3 work. Later still, only option 3 works. Restarting X causes all 3 to work again. I've compared the output of "synclient" in each of the states, and there was no difference. Anybody know what to look at? Or at the very least, a command I can run to "restart" the mouse driver without restarting X?

  Read the article

• Drag and drop fearture for a website

  - by gpuguy

  I have to design a website which will have drag and drop features for creating an e-card. So you select items from a tool box and drag and drop this item on the card area. Once you have completed the design you can publish the e-card on the web by clicking "Save and publish" button. What are the possible technologies for implementing this feature? The requirement is that the application should not degrade the performance of the website, and should not take much time in publishing once the user click "Save and publish" button.

  Read the article

• How to drag from a background window to the front window

  - by Luis Alvarado

  Is the following I will explain possible with a key combination? Here is the image: As you can see, the terminal is the focus window (Front window) and Nautilus is in the background (Back Window). How can I grab a folder or file from Nautilus without loosing focus on the terminal (Without making the terminal go to the background and Nautilus to the front) and drop it in the terminal?. What I want is not to have to ALT+TAB again just to do this. Options like resizing the windows to fit the screen are not what I am looking for. Like in the image, we have a fullscreen window that we want it to stay like that. We can drag the terminal window around but anytime I access the background nautilus window, I should not loose focus on the terminal (It should not go to the background every time I access Nautilus). Maybe like a key combination that freezes the current focus windows positions and I can drag from background windows to background windows or background windows to the front focused one.

  Read the article

• 13.04 gnome problem with drag and drop and text selection

  - by Laurent BERNABE

  I have an ubuntu 13.04 gnome 64 bits, but since a few days I am facing serious problem for doing simple drag an drop : in nautilus, in eclipse, in the browser. Also I can't manage to select text areas with the mouse (the only way I found is to double click on the first word, then expand selection with shift and arrows keys). I noticed that often, after having started a drag n drop, it is cancelled though I did not release the left mouse ! It is as if for each simple mouse clic : two was done ! My graphic card is an ati radeon hd 4330, and I had installed the default purposed driver. I don't know if I should give you results from some terminal commands, as I don't know which could be useful. Thanks in advance.

  Read the article

• Python - drag file into .exe to run script

  - by PPTim

  Hi, I have a Python script that takes the directory path of a text file and converts it into an excel file. Currently I have it running as a console application (compiled with py2exe) and prompts the user for the directory path through raw_input(). How do i make it such that I can drag & drop my text file directly into the .exe of the python script? Thanks,

  Read the article

• jQuery Drag and Drop Checking Question

  - by Kim

  i am new to using jQuery and I just want to know how I can check whether a draggable object has been removed from the droppable object. Example, i have a dog and I dragged it to a doghouse which has a lightbulb that will light up indicating that the dog is there. When i drag the dog out of the doghouse, the lightbulb should go off again indicating the dog's absence. Help me please coz I really don't have any idea how to do this. Thanks in advance. :)

  Read the article

• LibreOffice - Can't drag and replace images [LibreOffice 3.5 and 3.6, Ubuntu 12.04]

  - by Anderxale

  My wife uses LibreOffice to create catalogues of a couple hundred items and then converts it to PDF. Man we love LibreOffice! Anyway I set up Windows-7 and Mint-14-Mate dual boot for her to ease into Linux. Today she was ready for Ubuntu and so I did a clean install on her machine. Everything was smooth but today when she tried to work she ran into an issue... She used to be able to download a folder full of images to use in her catalogues and then update her catalogues by replacing old images with new ones. It was so simple - Open an old catalogue, save with a new date, drag and drop replace images of items that no longer exist. The drag and drop process would scale the image and then crop it horizontally or vertically to fit. Now that I have installed Ubuntu 12.04 for her she can no longer replace images, it just does nothing... If she drags the image to the left or right of the original it appears next to the original so I know d&d works, unfortunately it does not resize or crop the image. I tried this on my laptop and my desktop... same thing! I then tried updating the LibreOffice to 3.6, no change. I then tried opening a virtual machine windows xp and Mint 14 on this computer and tried with 3.6 in those operating systems and it worked. Can anyone help? I have a lot of hope that there is an answer because Mint is based on Ubuntu/Debian and that distro can perform this task successfully! Sorry about writing a book....

  Read the article

• Cannot move/drag/drop windows/items in remote VNC session

  - by hansioux

  I find it a little hard to believe that no one here has asked this question, I tried searching for it but it isn't asked, so here goes: I setup a Ubuntu desktop computer with VNC to use as a server. And use another Ubuntu desktop computer to VNC into it. The rest of the VNC works ok, but drag and drop with mouse is gone. Thus I can not move windows, or drag and drop items via VNC. I am using the default remote desktop in System - Preferences to setup my server. And use Remmina as my client. The same happens using MS Windows's VNC clients connecting to my Ubuntu desktop. I did a bit of searching on google, and there are actually a lot of reports regarding this issue. But, oddly there is no solution. There are even bug reports made for this since Ubuntu 9.10, yet here it still is in Ubuntu 11.04. There have been suggestions that the bugs is in gtk, as see in link below: http://ubuntuforums.org/showthread.php?t=1497635&page=2 libgtk2.0-0 stable(lenny) -> DnD works libgtk2.0-0 lenny-backport (libgtk2.0-0_2.18.6-1~bpo50+1_i386) -> DnD still works libgtk2.0-0 testing (libgtk2.0-0_2.20.1-2_i386) -> DnD broken please don't give answers such as "use NX", "use ssh -x" or "use x11vnc". I am aware that some people don't have this problem with x11vnc, and I have setup x11vnc before, but i can't for this setup. I am setting this up so Windows only friends/families can use it.

  Read the article

• What technique to use when trying to drag elements around on a canvas

  - by choise

  I want to achieve two things in my java swing application: First, i need a canvas zone where i can drag elements (a rectangle or a circle) from the outside of a pane inside the canvas and place it at the position where they where dropped. also it should be possible to select an element on the canvas and move it around and drop it on another location on the canvas. what techniques would fit best to do such a job? Please leave a comment if something is unclear.

  Read the article

• Dojo: drag and drop Stop Drag

  - by Jose L Martinez-Avial

  Hi, I'm trying to use Dojo dnd Source(1.4.2) to create an interface where I can move some objects from a Source to a Target. It is working fine, but I want to change the behaviour in order to execute a check before actually doing the D&D, so if the check fails, an error message is shown to the user, and the D&D is not made. I've tried the following example I found in a blog: dojo.subscribe("/dnd/drop", function(source,nodes,iscopy) { if (nodes[0].id == 'docs_menu'){ dojo.publish("/dnd/cancel"); dojo.dnd.manager().stopDrag(); alert("Drop is not permitted"); } } ); But it fails saying that this.avatar is null. Does anybody know how to do this? Thanks. Jose

  Read the article

• SQLAuthority News – Book Signing Event – SQLPASS 2011 Event Log

  - by pinaldave

  I have been dreaming of writing book for really long time, and I finally got the chance – in fact, two chances!  I recently wrote two books: SQL Programming Joes 2 Pros: Programming and Development for Microsoft SQL Server 2008 [Amazon] | [Flipkart] | [Kindle] and SQL Wait Stats Joes 2 Pros: SQL Performance Tuning Techniques Using Wait Statistics, Types & Queues [Amazon] | [Flipkart] | [Kindle].  I had a lot of fun writing these two books, even though sometimes I had to sacrifice some family time and time for other personal development to write the books. The good side of writing book is that when the efforts put in writing books are recognize by books readers and kind organizations like expressor studio. Book Signing Event Book writing is a complex process.  Even after you spend months, maybe years, writing the material you still have to go through the editing and fact checking processes.  And, once the book is out there, there is no way to take back all the copies to change mistakes or add something you forgot.  Most of the time it is a one-way street. Book Signing Event Just like every author, I had a dream that after the books were written, they would be loved by people and gain acceptance by an audience. My first book, SQL Programming Joes 2 Pros: Programming and Development for Microsoft SQL Server 2008, is extremely popular because it helps lots of people learn various fundamental topics. My second book covers beginning to learn SQL Server Wait Stats, which is a relatively new subject. This book has had very good acceptance in the community. Book Signing Event Helping my community is my primary focus, so I was happy to see this year’s SQLPASS tag line: ‘This is a Community.‘ At the event, the expressor studio guys came up with a very novel idea. They had previously used my books and they had found them very useful. They got 100 copies of the book and decided to give it away to community folks. They invited me and my co-author Rick Morelan to hold a book signing event. We did a book signing on Thursday between 1 pm and 2 pm. Book Signing Event This event was one of the best events for me. This was my first book signing event outside of India. I reached the book signing location around 20 minutes before the scheduled time and what I saw was a big line for the book signing event. I felt very honored looking at the crowd and all the people around the event location. I felt very humbled when I saw some of my very close friends standing in the line to get my signature. It was really heartwarming to see so many enthusiasts waiting for more than an hour to get my signature. While standing in line I had the chance to have a conversation with every single person who showed up for the signature. I made sure that I repeated every single name and wrote it in every book with my signature. There is saying that if we write a name once we will remember it forever. I want to remember all of you who saw me at the book signing. Your comments were wonderful, your feedback was amazing and you were all very supportive. Book Signing Event I have made a note of every conversation I had with all of you when I was signing the books. Once again, I just want to express my thanks for coming to my book signing event. The whole experience was very humbling. On the top of it, I want to thank the expressor studio people who made it possible, who organized the whole signing event. I am so thankful to them for facilitating the whole experience, which is going to be hard to beat by any future experience. My books Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL PASS, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, SQLAuthority News, T SQL, Technology

  Read the article

• User is trying to leave! Set at-least confirm alert on browser(tab) close event!!

  - by kaushalparik27

  This is something that might be annoying or irritating for end user. Obviously, It's impossible to prevent end user from closing the/any browser. Just think of this if it becomes possible!!!. That will be a horrible web world where everytime you will be attacked by sites and they will not allow to close your browser until you confirm your shopping cart and do the payment. LOL:) You need to open the task manager and might have to kill the running browser exe processes.Anyways; Jokes apart, but I have one situation where I need to alert/confirm from the user in any anyway when they try to close the browser or change the url. Think of this: You are creating a single page intranet asp.net application where your employee can enter/select their TDS/Investment Declarations and you wish to at-least ALERT/CONFIRM them if they are attempting to:[1] Close the Browser[2] Close the Browser Tab[3] Attempt to go some other site by Changing the urlwithout completing/freezing their declaration.So, Finally requirement is clear. I need to alert/confirm the user what he is going to do on above bulleted events. I am going to use window.onbeforeunload event to set the javascript confirm alert box to appear.    <script language="JavaScript" type="text/javascript">        window.onbeforeunload = confirmExit;        function confirmExit() {            return "You are about to exit the system before freezing your declaration! If you leave now and never return to freeze your declaration; then they will not go into effect and you may lose tax deduction, Are you sure you want to leave now?";        }    </script>See! you are halfway done!. So, every time browser unloads the page, above confirm alert causes to appear on front of user like below:By saying here "every time browser unloads the page"; I mean to say that whenever page loads or postback happens the browser onbeforeunload event will be executed. So, event a button submit or a link submit which causes page to postback would tend to execute the browser onbeforeunload event to fire!So, now the hurdle is how can we prevent the alert "Not to show when page is being postback" via any button/link submit? Answer is JQuery :)Idea is, you just need to set the script reference src to jQuery library and Set the window.onbeforeunload event to null when any input/link causes a page to postback.Below will be the complete code:<head runat="server">    <title></title>    <script src="jquery.min.js" type="text/javascript"></script>    <script language="JavaScript" type="text/javascript">        window.onbeforeunload = confirmExit;        function confirmExit() {            return "You are about to exit the system before freezing your declaration! If you leave now and never return to freeze your declaration; then they will not go into effect and you may lose tax deduction, Are you sure you want to leave now?";        }        $(function() {            $("a").click(function() {                window.onbeforeunload = null;            });            $("input").click(function() {                window.onbeforeunload = null;            });        });    </script></head><body>    <form id="form1" runat="server">    <div></div>    </form></body></html>So, By this post I have tried to set the confirm alert if user try to close the browser/tab or try leave the site by changing the url. I have attached a working example with this post here. I hope someone might find it helpful.

  Read the article

• Why do child elements cause 'dropleave' to be called (drag-n-drop file upload)?

  - by tundoopani

  I have a HTML5 drag-n-drop script that allows users to drop files in #droparea. The #droparea div has child elements that are also div elements. <div id="droparea"> <div id="showif_no_dragover">Drag files here!</div> <div id="showif_dragover">Drop the files!</div> </div> The associated javascript/jquery is: var droptarget = "#droparea"; $(droptarget).live('dragenter', dragEnter); $(droptarget).live('dragleave', dragExit); $(droptarget).live('dragover', nothing); $(droptarget).live('drop', dropGo); (Side question: should I use .live(), .on() or .bind() here?) I have created a sample jsFiddle with some additional code here: http://jsfiddle.net/PwFr9/3/ If you look at the console, you will notice that as you drag a file within #droparea, dragenter() and dragleave() are called multiple times, even though the drag is still inside #droparea. If you remove the child elements (#child1 and #child2), the problem is gone because the child elements are gone. How can I keep the child elements and prevent them from messing up the drag events? I have searched Stackoverflow and Google for hours without much help. I found this questions here at Stackoverflow: How to keep child elements from interfering with HTML5 dragover and drop events? I don't know why it works, though. I have tried placing 2 div elements on top of each other (via CSS positioning). The top-most div has the drag events attached whereas the bottom-most div has the child elements. I do not like this approach because it doesn't work with the rest of my page and does not allow mouse-click interaction with the bottom-most div. Any help is appreciated! Thank you in advance. Regards, tundoo

  Read the article

• WinForms window drag event

  - by Steve Syfuhs

  Is there an event in WinForms that get's fired when a window is dragged? Or is there a better way of doing what I want: to drop the window opacity to 80% when the window is being dragged around? Unfortunately this is stupidly tricky to search for because everyone is looking for drag and drop from the shell, or some other object.

  Read the article

• Event sourcing: Write event before or after updating the model

  - by Magnus

  I'm reasoning about event sourcing and often I arrive at a chicken and egg problem. Would be grateful for some hints on how to reason around this. If I execute all I/O-bound processing async (ie writing to the event log) then how do I handle, or sometimes even detect, failures? I'm using Akka Actors so processing is sequential for each event/message. I do not have any database at this time, instead I would persist all the events in an event log and then keep an aggregated state of all the events in a model stored in memory. Queries are all against this model, you can consider it to be a cache. Example Creating a new user: Validate that the user does not exist in model Persist event to journal Update model (in memory) If step 3 breaks I still have persisted my event so I can replay it at a later date. If step 2 breaks I can handle that as well gracefully. This is fine, but since step 2 is I/O-bound I figured that I should do I/O in a separate actor to free up the first actor for queries: Updating a user while allowing queries (A0 = Front end/GUI actor, A1 = Processor Actor, A2 = IO-actor, E = event bus). (A0-E-A1) Event is published to update user 'U1'. Validate that the user 'U1' exists in model (A1-A2) Persist event to journal (separate actor) (A0-E-A1-A0) Query for user 'U1' profile (A2-A1) Event is now persisted continue to update model (A0-E-A1-A0) Query for user 'U1' profile (now returns fresh data) This is appealing since queries can be processed while I/O-is churning along at it's own pace. But now I can cause myself all kinds of problems where I could have two incompatible commands (delete and then update) be persisted to the event log and crash on me when replayed up at a later date, since I do the validation before persisting the event and then update the model. My aim is to have a simple reasoning around my model (since Actor processes messages sequentially single threaded) but not be waiting for I/O-bound updates when Querying. I get the feeling I'm modeling a database which in itself is might be a problem. If things are unclear please write a comment.

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >