Search Results

Search found 13 results on 1 pages for 'drpcken'.

Page 1/1 | 1 

• Use to host email for a domain name that wasn't our primary domain name

  - by drpcken

  Exchange 2007 on an Server 2003 active directory. My primary domain (MyMainDomain.com) controller also hosts dns and dhcp. I have a secondary domain name (MySecondDomain.net) that my Exchange Server allows emails from. It wasn't a physical domain, just accepted by exchange and setup as the Active Directory user's main smtp and outgoing address. Its MX records point to MyMainDomain.com's public exchange address. I've taken MySecondDomain.net and move the mail boxes to a hosted exchange 2010 environment. MX records now point to this new exchange system and when I send and email OUTSIDE the MyMainDomain.com environment (say gmail) it works and sends to the hosted exchange setup for MySecondDomain.net. however when I send an email from a user on MyMainDomain.com, it goes to the old exchange 2007 server I am hosting internally. I have removed MySecondDomain.net from the allowed domains, removed the DNS zone for MySecondDomain.net, and cleared DNS cache. I was convinced it was my internal dns server but I've cleared the DNS cache. Is there something I'm missing somewhere in exchange 2007? Or is it my domain controller/dns? Sorry if this is confusing. Thank you!

  Read the article

• ASA 5510 Need to filter traffic log events to my iPhone

  - by drpcken

  For some reason I cannot update apps or download apps to any ios devices on my network (tried both iphone and ipads). When I'm at home on my own network everything works fine. This started about a week ago. I've configured my iphone with a static IP address and even used 4.2.2.2 as my dns to rule out that the issue is with my DNS Server. I'm looking at the SYSLOG in ASDM (Cisco ASA 5510) but Im not sure it is providing me enough info. It seems to be showing ACL blocks on my public ip address, but not individual client IP's, so I can't see whats going on. How can I setup a way to filter any incoming/outgoing traffic to my iPhone's static IP and try and troubleshoot this?

  Read the article

• Upgrading my Active Directory domain from Server 2003 to Server 2008 R2

  - by drpcken

  We are currently a single domain on a single network running Server 2003 Standard and Exchange 2007. I have a new server up and running (added to the domain already) with Server 2008 R2 on it. I want this to become my Primary Domain Controller, thus replacing my old Server 2003 server. I know I should just be able to run dcpromo on the new server, then decomission my old server, and raise my domain functional level to match the 2008 server. My only concern is the Exchange 2007 server. Is there anything I need to know relevant to it before I start? Thanks!

  Read the article

• Printer server drivers for Samsung ML printer series

  - by drpcken

  I have a Printer Server running server 2008. I'm trying to setup some Samsung ML printers on it (ML-3050, 2150 and 2570 printers). The print server is server 2008 and all my clients are Windows 7 x86. I just never know which drivers to get for the server. On the site they have Universal, PCL5 and PCL6, PostScript, and SPL drivers. From what I've read PS is the best right? I just have problems getting them installed on the server and having clients connect. Which driver type is the best?

  Read the article

• What are some of the best answer file settings for a WDS Deployment?

  - by drpcken

  I've had my head buried in answer files for days now and have gotten quite comfortable setting them up, test, etc... I use a handful of Components to help my migrations, for my unattend.xml I like: Windows-International-Core-WinPE -- this is good for setting Locales the preboot environment (en-us for us english US speakers). Keeps me from having to set these on the initial image boot. Windows-Setup_neutral -- I like the WindowsDeploymentServices -> ImageSelection, especially if I'm only pushing a single image. This keeps me from having to select it each time. My OOBE_Unattend.xml is really useful and I barely have to touch anything during this part of the installation: Windows-Shell-Setup_neutral -- This lets me put a ProductKey in for my MAK volume license (very useful and time saving). I can also set the TimeZone for the installation. Windows UnattendedJoin_neutral -- I couldn't live without this component. It joins the machine on my domain before logging in as a domain administrator. I would hate to not have this ability. Windows-International-Core -- Again this component really speeds up the OOBE process. I configure my locals and time zone so I don't have to do it by hand when the machine enteres OOBE. Windows-Shell-Setup -- Allows you to configure an autologon when the new machine is finished. I like to logon as a domain admin automatically for customizing and troubleshooting the new machine immediately after it is imaged. Also the OOBE component under here lets me skip the EULA, Hide Wireless Setup, and set my default NetworkLocation. All of this makes the entire OOBE totally automated. What are some other good components I am missing as far as helping me get these images pushed and configured as quickly as possible?

  Read the article

• Single domain user can't install a specific shared network printer

  - by drpcken

  I have a file server serving up shared network printers. Never had any issues in the past. I have a specific domain user (just 1) that gets this error when trying to install a specific printer: You do not have sufficient access to your computer to connect to the selected printer This user can install all the other printers no problem. All my other domain users can install the printer with no problem. I've removed the driver from the local client and tried again but with the same problem. Even as an administrator I get this error. Is there something I'm missing?

  Read the article

• How can I create a VLAN on my extreme switch for a separate subnet/domain?

  - by drpcken

  I'm putting together a small active directory implementation for a buddy of mine. I currently have 2 servers (one is the primary domain controller) and a couple clients. I need to test and run updates on every machine on this domain, but I would have plug them into my current LIVE domain to get it internet access. From what I've read having two separate domains on a single subnet is a bad idea (even though it is temporary) so I don't want to risk messing anything up on my production domain. I'm pretty sure I can create a separate VLAN on my extreme 48 port switch and plug this smaller domain into it on a different subnet, but I don't know the commands. Both subnets would need internet access of course (one of the things I can't wrap my head around is routing internet traffic between subnets (gateway is on production subnet). Switch is a Summit x450e-48p My production domain is on subnet 192.168.200.0. My new domain I want to put online would go into subnet 192.168.10.0. A shove in the right direction would be greatly appreciated. Thank you!

  Read the article

• Best client and server antivirus for 5 user office?

  - by drpcken

  I'm setting up an Active Directory environment for 5 users (very small) and I'm wondering what is the best antivirus for clients (Windows 7) and servers (Server 2008 R2 x64)? I use Symantec Corp at my organization (50+ users) but I think that is overkill for this company. I wanted to use Microsoft Security Essentials for the clients (I use it for home machines and it's the best free AV in my opinion) but I don't think it will work on the Servers (3 servers, PDC, TS, and File). They are behind a Sonicwall TZ 200. What would be the best. Free would be even better. Thank you!

  Read the article

• How can I automatically create a folder, assign a home folder and logon script automatically after a new User is created?

  - by drpcken

  Usually I create a new user, then set the home folder, logon script, etc... Is it possible in Active Directory when I create a new AD user object, that it goes out to my share drive and automatically creates a folder for them (naming it their username), and then assigns that folder as their home drive? It would also be helpful if it would automatically assign them a specific logon script at user creation too. Thank you!

  Read the article

• How can I create a VLAN on my extreme switch for a seperate subnet/domain?

  - by drpcken

  I'm putting together a small active directory implementation for a buddy of mine. I currently have 2 servers (one is the primary domain controller) and a couple clients. I need to test and run updates on every machine on this domain, but I would have plug them into my current LIVE domain to get it internet access. From what I've read having two separate domains on a single subnet is a bad idea (even though it is temporary) so I don't want to risk messing anything up on my production domain. I'm pretty sure I can create a separate VLAN on my extreme 48 port switch and plug this smaller domain into it on a different subnet, but I don't know the commands. Both subnets would need internet access of course (one of the things I can't wrap my head around is routing internet traffic between subnets (gateway is on production subnet). My production domain is on subnet 192.168.200.0. My new domain I want to put online would go into subnet 192.168.10.0. A shove in the right direction would be greatly appreciated. Thank you!

  Read the article

• Do I need to transfer Server license CALs to new Domain Controller during AD transition?

  - by drpcken

  I have an old Server 2003 domain controller I'm ready to decommission. I notice in Server 2003 there is a Licensing module under Administrative Tools that seems to manage and track user CAL's for the domain controller. I don't see this on my newly promoted Server 2008 domain controller, nor do I see any roles to add it. Does this need to be transferred to my new Server 2008 domain controller or will it all happen when the old server is decommissioned? I've already transferred all my Terminal Server licenses to the new server. Thank you!

  Read the article

• Loading a helper elsewhere than the autoload.php?

  - by drpcken

  I inherited a project and I'm cleaning up a bit and trying to finish it. I noticed that they used (or wrote) a breadcrumb helper. It is in my helpers folder and is named breadcrumb_helper.php It has a single function to build a breadcrumb menu with links and pass it to the view breadcrumbs.php. Here's the code: function show_breadcrumbs() { $ci =& get_instance(); $ci->load->helper('inflector'); $data = ''; //build breadcrumb and store in $data $this->load->view("breadcrumbs", $data) } I was trying to figure out how this helper worked and I checked the autoload.php but there is no reference to the helper in there. In face here is my autoload: $autoload['helper'] = array('url','asset','combine','navigation','form','portfolio','cookie','default'); This show_breadcrumbs() function is used quite a bit in some of my pages so I'm confused as to how its loading if it isn't in the autoloader. It is called like this in a few of my pages: <?=show_breadcrumbs()?> What am I missing? Why isn't this in my autoload? I even did a global search and couldn't find anywhere the helper is being loaded.

  Read the article

• Mixture of php shorttags

  - by drpcken

  I'm taking over a codeigniter project and notice the original dev uses a mixture of short tag and php tags in the views. For example: <div id="content"> <?=show_header()?> <ul id="products"> <?php if (count($products) > 0) : ?> <?php foreach($products as $product) : ?> ... </div> Is this bad practice to inherit? I think it is already causing me problems in my dev environment.

  Read the article

1