Search Results

Search found 125 results on 5 pages for 'e ink'.

Page 1/5 | 1 2 3 4 5  | Next Page >

  • HTG Explains: Why is Printer Ink So Expensive?

    - by Chris Hoffman
    Printer ink is expensive, more expensive per drop than fine champagne or even human blood. If you haven’t gone paperless, you’ll notice that you’re paying a lot for new ink cartridges — more than seems reasonable. Purchasing the cheapest inkjet printer and buying official ink cartridge replacements is the most expensive thing you can do. There are ways to save money on ink if you must continue to print documents. Cheap Printers, Expensive Ink Ink jet printers are often very cheap. That’s because they’re sold at cost, or even at a loss — the manufacturer either makes no profit from the printer itself or loses money. The manufacturer will make most of its money from the printer cartridges you buy later. Even if the company does make a bit of money from each printer sold, it makes a much larger profit margin on ink. Rather than selling you a printer that may be rather expensive, they want to sell you a cheap printer and make money on an ongoing basis by providing expensive printer ink. It’s been compared to the razor model — sell a razor cheaply and mark up the razor blades. Rather than making a one-time profit on the razor, you’ll make continuing profit as the customer keeps buying razor blade replacements — or ink, in this case. Many printer manufacturers go out of their way to make it difficult for you to use unofficial ink cartridges, building microchips into their official ink cartridges. If you use an unofficial cartridge or refill an official cartridge, the printer may refuse to use it. Lexmark once argued in court that unofficial microchips that enable third-party ink cartridges would violate their copyright and Lexmark has argued that creating an unofficial microchip to bypass this restriction on third-party ink would violate Lexmark’s copyright and be illegal under the US DMCA. Luckily, they lost this argument. What Printer Companies Say Printer companies have put forth their own arguments in the past, attempting to justify the high cost of official ink cartridges and microchips that block any competition. In a Computer World story from 2010, HP argued that they spend a billion dollars each year on “ink research and development.” They point out that printer ink “must be formulated to withstand heating to 300 degrees, vaporization, and being squirted at 30 miles per hour, at a rate of 36,000 drops per second, through a nozzle one third the size of a human hair. After all that it must dry almost instantly on the paper.” They also argue that printers have become more efficient and use less ink to print, while third-party cartridges are less reliable. Companies that use microchips in their ink cartridges argue that only the microchip has the ability to enforce an expiration date, preventing consumers from using old ink cartridges. There’s something to all these arguments, sure — but they don’t seem to justify the sky-high cost of printer ink or the restriction on using third-party or refilled cartridges. Saving Money on Printing Ultimately, the price of something is what people are willing to pay and printer companies have found that most consumers are willing to pay this much for ink cartridge replacements. Try not to fall for it: Don’t buy the cheapest inkjet printer. Consider your needs when buying a printer and do some research. You’ll save more money in the long run. Consider these basic tips to save money on printing: Buy Refilled Cartridges: Refilled cartridges from third parties are generally much cheaper. Printer companies warn us away from these, but they often work very well. Refill Your Own Cartridges: You can get do-it-yourself kits for refilling your own printer ink cartridges, but this can be messy. Your printer may refuse to accept a refilled cartridge if the cartridge contains a microchip. Switch to a Laser Printer: Laser printers use toner, not ink cartridges. If you print a lot of black and white documents, a laser printer can be cheaper. Buy XL Cartridges: If you are buying official printer ink cartridges, spend more money each time. The cheapest ink cartridges won’t contain much ink at all, while larger “XL” ink cartridges will contain much more ink for only a bit more money. It’s often cheaper to buy in bulk. Avoid Printers With Tri-Color Ink Cartridges: If you’re printing color documents, you’ll want to get a printer that uses separate ink cartridges for all its colors. For example, let’s say your printer has a “Color” cartridge that contains blue, green, and red ink. If you print a lot of blue documents and use up all your blue ink, the Color cartridge will refuse to function — now all you can do is throw away your cartridge and buy a new one, even if the green and red ink chambers are full. If you had a printer with separate color cartridges, you’d just have to replace the blue cartridge. If you’ll be buying official ink cartridges, be sure to compare the cost of cartridges when buying a printer. The cheapest printer may be more expensive in the long run. Of course, you’ll save the most money if you stop printing entirely and go paperless, keeping digital copies of your documents instead of paper ones. Image Credit: Cliva Darra on Flickr     

    Read the article

  • From the Tips Box: Revitalizing Ink Cartridges with a Water Infusion

    - by Jason Fitzpatrick
    If you’re convinced your ink cartridge has more ink to share than it is willing to give up, you’re right. Read on to see how How-To Geek reader Max squeezes extra life out of his cartridges with plain old water. Max wrote in with his simple solution. He wasn’t as interested in refilling his cartridges as he was in getting all the ink out of them. Here’s his detailed guide to getting nearly every drop of ink out of your high-priced ink cartridge: The ink in many brands of ink jet printer cartridges is generally water soluble. To see if your ink is water soluble, wet your finger and rub it across a page from your printer you don’t mind wasting.  If the print smears the ink is obviously water soluble. The top of the printer cartridge generally has the manufacturer’s label attached. It covers tiny holes through which the ink was injected into the cartridge during manufacture. Latest Features How-To Geek ETC How To Make Disposable Sleeves for Your In-Ear Monitors Macs Don’t Make You Creative! So Why Do Artists Really Love Apple? MacX DVD Ripper Pro is Free for How-To Geek Readers (Time Limited!) HTG Explains: What’s a Solid State Drive and What Do I Need to Know? How to Get Amazing Color from Photos in Photoshop, GIMP, and Paint.NET Learn To Adjust Contrast Like a Pro in Photoshop, GIMP, and Paint.NET Bring the Grid to Your Desktop with the TRON Legacy Theme for Windows 7 The Dark Knight and Team Fortress 2 Mashup Movie Trailer [Video] Dirt Cheap DSLR Viewfinder Improves Outdoor DSLR LCD Visibility Lakeside Sunset in the Mountains [Wallpaper] Taskbar Meters Turn Your Taskbar into a System Resource Monitor Create Shortcuts for Your Favorite or Most Used Folders in Ubuntu

    Read the article

  • Buying a new printer instead of replacing ink?

    - by Kelsey
    With prices of basic printers being around $40 - $50 and a ink cartridge being around $20 - $30 each for black AND color. It costs me more to replace the printer's ink than to just buy a brand new printer. This just seems like a total waste of materials though (I have 4 printers sitting in my basement with no ink). I know the ink cartridges are smaller (not as full) in a new printer but I go through it in about 1 to 1.5 years only and by then my $40 gets me a better printer to boot. Also with certain printers the heads are not part of the ink (Epson use to do this and still might) so I get new heads as well. Is this a bad practice? Are retailers making this a reality when they are selling working hardware cheaper than replacement parts? Is there something more I should be considering? Edit: Some background, long ago I bought an Epson printer which I used to print docs etc vary rarely. The ink started running low so I bought to new carts for around $60 if I recall. The printer then stopped working so I replaced the carts with the new ones but the head was dead on the black which was not worth repairing. I bought a new HP printer for $49. This lasted around 1.5yrs and then the ink ran out, I went to buy new carts and the guy at the store got me to buy a new printer (that was smaller, faster, higher dpi, etc) and it was cheaper than replacing the ink. When the ink ran out on that one I bought a new printer again, etc. The printer gets used maybe once a week at most and I never print photos or anything. It normally is jsut stored away unplugged accumulating dust. People say to buy a laser printer but they are much larger, do not print color, (in the price range I am looking at) and might have the exact same issues. The problem I see is the manufacturer is making my behaviour possible by selling new printers at a loss hoping that they will cash in on the ink later. How can they produce a printer for so cheap which HAS ink in it, and the refills cost more than the unit? It can't.

    Read the article

  • Saving ink when printing?

    - by Walkerneo
    I need a map of the SMC campus, but I'm really sick of running out of ink after printing one thing and then having to pay ridiculous sums of money to buy more ink. The map is here: http://www.smc.edu/campusmap/images/SMC-2D-Map_12-Clr_9-10_crop.jpg I would print in black and white, but I'm wondering if there are any chrome or photoshop extensions, or even websites that transform the image into something more ink-conservative. For example, I don't need the buildings to be a solid color, or the roads to be gray, so it would be a tremendous waste of ink to print it as is. Anyone know anything like I'm talking about?

    Read the article

  • E-ink screens for desktop PC?

    - by Legooolas
    Are there PC monitors which are e-ink displays? E-ink is so much easier to read documents on that I'd rather like a secondary monitor just for documents, but I can't find any monitors available currently. Perhaps just an e-reader with some kind of remote control from a PC, so that it can be put in a cradle and display a document, but it would also need to have a fairly large screen to make it practical (perhaps something like A4 (EU) or Letter (US) sized?)

    Read the article

  • Brother ink printer: vertical adjustment of alignment does not work

    - by Ralf
    I have a brother mfc-5440cn and tried to adjust the vertical alignment with the result that the printing quality now is very poor. The printer prints a small schadow next to each letter :-( I tried to re-adjust the alignment, but for the 600dpi settings, there is no pattern that matches the 0-pattern (you know what I mean when you've once adjsuted a brother printer :-) Is there a way to make a factory reset?

    Read the article

  • Most ink-friendly printer?

    - by Groves
    I have an Epson stylus printer that suspends printing if any one of the four colors (CMYK) are empty. Its a total waste of money and time because i have to go to the store to replace a single color when all i want to do is print b&w. Can someone recommend a printer that: Does not suspend printing when cartridges are low or empty Uses larger cartridges so i don't have to replace them so frequently

    Read the article

  • Will the Canon Pixma MX882 Wireless Multifunction Printer allow you to keep printing once one ink cartridge has run out?

    - by braveterry
    My wife's Epson Workforce 600 has died, and I'm thinking of replacing it with a Canon Pixma MX882 printer/scanner/copier/fax. One of the most annoying things about the Epson is that once it has decided that one of the ink cartridges is empty, it will not let you print anything until the empty cartridge is replaced. I have a Canon IP1800 that will let you print until a cartridge actually runs out of ink, and even when a cartridge is depleted, I can continue to print using the other colors. (The driver allows you to print using only the color cartridges or using only the black cartridge.) Questions: Will the Canon Pixma MX882 allow me to print until the ink runs out or will it declare the cartridge empty while ink is still left? Will the Canon Pixma MX882 allow me to keep printing even after one of the cartridges has been used up?

    Read the article

  • Cheap Ink Cartridges - Your Questions Answered

    If you?ve checked the prices of ink at a High Street office supplies or computer shop, you may not believe that such things as cheap ink cartridge exist. Most new printer owners are shocked to discov... [Author: Kathryn Dawson - Computers and Internet - May 31, 2010]

    Read the article

  • Amazon Kindle e-Ink based device programming: Java ME CDC old school

    - by hinkmond
    If you like doing Amazon Kindle development in the old-school way (Java ME CDC-based apps) on their e-Ink based readers, then here's how to download and use the Amazon Kindle Development Kit (KDK). See: Download Amazon KDK Here's a quote: We're excited to introduce the all- new Kindle family: Kindle, Kindle Touch, and [blah-blah]. The KDK has APIs, tools, and documentation to help you create active content for Kindle, Kindle Touch, and other E Ink Kindles. Kickin' old school with Java ME CDC technology is the way to go. You can come up with the next Word with Friends this way. Hinkmond

    Read the article

  • Printer Ink Cartridges

    Inkjet printers, driven by their printer ink cartridges, have made fast, quality printing work available for everyone both at home and in business. If you remember the old dot matrix printers which c... [Author: Kathryn Dawson - Computers and Internet - May 30, 2010]

    Read the article

  • Pixus MP990 Rejecting US Ink Cartridges

    - by QRohlf
    I recently acquired a Pixus MP990 Canon Printer. It is from Japan (hence the "Pixus" rather than "Pixma"). It's been working well, however I just had to change an ink cartridge today, and every time I attempt to do so I get a u140 "ink tank cannot be recognized" error. These are genuine Canon ink cartridges purchased from Canon's USA website. Is a region issue causing the rejection, and if so is there a way to change the region of the printer to the US? Is there anything else I can do? (I have made sure it's not the physical connection that is the problem - I've tried two different ink cartridges in their respective slots, and I still get the same problem.)

    Read the article

  • Epson XP-600 will not print properly with all new ink recently installed

    - by Joy
    I just installed brand new Epson 273 ink cartridges ($64 worth!) in my Epson XP-600 printer. One box had all the colors plus black, and one had the fatter black cartridge. I am not getting ANY black print on paper, although, when I lift the cartridges out, they show ink inside. Now the yellow is saying LOW though all cartridges are less than 2 weeks old. I only use this printer sparingly—not for business or work reasons. I am ready to scream, as the ink cost almost as much as the actual printer (which is barely 7 months old)! Any ideas on how to solve this issue?

    Read the article

  • Make Your Ink Cartridges Last Longer

    The speed at which technology progresses is so fast it can be hard to keep up with new developments, changes and products. These days hardly anyone uses the traditional paper and pen to write things ... [Author: Kathryn Dawson - Computers and Internet - June 11, 2010]

    Read the article

  • Printer Ink Cartridges for Home or Office

    Looking for a printer for your home office? Deciding on the right one for you can be a difficult decision to make, especially if you are not really sure what each type has to offer. Printers have c... [Author: Kathryn Dawson - Computers and Internet - May 03, 2010]

    Read the article

  • HP Photosmart C5280 black ink not printing properly

    - by Andreas Strandfelt
    I just got a used HP Photosmart C5280 from my father in law. There is a problem with the black ink, though. Sometimes, it doesn't print and when it does, it's not really black. An example can be seen at the following link, where I created three black boxes on a Word page and printed. The outcome is somewhat blueish: Other tests with black text only come out as blank pages. I have tried using the print head cleaning utility from the menu of the printer as well as doing the cleaning myself with alcohol. Nothing has worked. Any ideas before I throw out the black cartridge?

    Read the article

  • How do I calculate the cost of printing a given page?

    - by Alenanno
    I have seen questions like How much does a square inch of ink cost and How much more will a high-dpi image cost to print?, but mine isn't asking neither about a specific case, nor about how much something costs, as that would depend on the toner, for example. Rather, I was wondering how should I go about calculating the cost of printing a given page. Note that "given page" should be seen as a sort of x, i.e. the answer should be applicable in any case; I'd like this question to provide a good reference for those who want to calculate this cost. What should be taken into consideration? The cost of a single page (the paper only) is easily checkable, since you divide the cost of the whole package for the number of pages in the package itself. But how do I calculate the cost of the ink/toner? Which could translate to: how do I calculate the Ink Density1 for a given printer? I know it depends on quality of the printer itself, the type, the quality of the image being printed, the very nature of what I'm going to print, etc. But again, the focus of my question is not on the variables of this case, but rather the constants, hoping the math simile works for this case too. 1: Total amount of ink in one area of the page.

    Read the article

  • Can't delete keyboard shortcut set for a .ink file

    - by Sirhaian
    So, I installed the Chrome App Launcher on my PC (now on Win8.1) a few weeks ago, and, as I use it very often, I wanted to assign a keyboard shortcut for it. So, I right-clicked the icon on my desktop, and I assigned Ctrl+Alt+<. The problem is... I moved the shortcut to my taskbar, and suddenly noticed that when I wanted to write the "\" (on a Belgian keyboard), it launched the Chrome App Launcher, which is very annoying. I wanted to change it back, but I can't... I deleted the taskbar shortcut, but the keyboard shortcut still launches the App Launcher. I also tried creating a new shortcut with the same association, hoping that it would crush the existing one, but it didn't work. I searched on Google for similar issues, and I couldn't find any... x~x So... How can I delete this shortcut association..?

    Read the article

  • Could I save printer's ink/toner by changing the font?

    - by Diogo
    I'm developing a Microsoft Word document that reached more than 200 pages and I want to print it using my Laserjet or my father's Inkjet printer. I can save paper using both sides of each sheet, however I can't save ink/toner using smaller fonts or un-bolding words (I already did it), so I started wondering about the fonts that I was using. For example, the most used fonts, Arial and Times New Roman have specific and relevant differences with regards to ink consumption: has uniform width across all the letters, and is more easily readable and "clean to see". has narrow width on center and an enlargement at the ends. Using Times New Roman will certainly save ink/toner but will also "pollute" the reader vision over time. So, there is some specific font (from more than 100 that I have on Windows) that could save ink and also keep a clean text?

    Read the article

  • Generating PDF results in single page only?

    - by A T
    Generating a PDF from an email (Zurb Ink templated); but am always presented with a single page PDF. Runnable test-case: from weasyprint import HTML, CSS from urllib2 import urlopen if __name__ == '__main__': html = urlopen('http://zurb.com/ink/downloads/templates/basic.html').read() html = html.replace('<p class=\"lead\">', '{0}<p class=\"lead\">'.format( '<p class=\"lead\">{0}</p>'.format("foobar " * 50) * 50)) HTML(string=html).write_pdf('foo.pdf', stylesheets=[ CSS(string='@page { size: A4; margin: 2cm };' '* { float: none !important; };' '@media print { nav { display: none; } }') ]) How do I get a multi-page PDF?

    Read the article

1 2 3 4 5  | Next Page >