Search Results

Search found 94 results on 4 pages for 'eap'.

Page 1/4 | 1 2 3 4  | Next Page >

  • Why should you choose Oracle WebLogic 12c instead of JBoss EAP 6?

    - by Ricardo Ferreira
    In this post, I will cover some technical differences between Oracle WebLogic 12c and JBoss EAP 6, which was released a couple days ago from Red Hat. This article claims to help you in the evaluation of key points that you should consider when choosing for an Java EE application server. In the following sections, I will present to you some important aspects that most customers ask us when they are seriously evaluating for an middleware infrastructure, specially if you are considering JBoss for some reason. I would suggest that you keep the following question in mind while you are reading the points: "Why should I choose JBoss instead of WebLogic?" 1) Multi Datacenter Deployment and Clustering - D/R ("Disaster & Recovery") architecture support is embedded on the WebLogic Server 12c product. JBoss EAP 6 on the other hand has no direct D/R support included, Red Hat relies on third-part tools with higher prices. When you consider a middleware solution to host your business critical application, you should worry with every architectural aspect that are related with the solution. Fail-over support is one little aspect of a truly reliable solution. If you do not worry about D/R, your solution will not be reliable. Having said that, with Red Hat and JBoss EAP 6, you have this extra cost that will increase considerably the total cost of ownership of the solution. As we commonly hear from analysts, open-source are not so cheaper when you start seeing the big picture. - WebLogic Server 12c supports advanced LAN clustering, detection of death servers and have a common alert framework. JBoss EAP 6 on the other hand has limited LAN clustering support with no server death detection. They do not generate any alerts when servers goes down (only if you buy JBoss ON which is a separated technology, but until now does not support JBoss EAP 6) and manual intervention are required when servers goes down. In most cases, admin people must rely on "kill -9", "tail -f someFile.log" and "ps ax | grep java" commands to manage failures and clustering anomalies. - WebLogic Server 12c supports the concept of Node Manager, which is a separated process that runs on the physical | virtual servers that allows extend the administration of the cluster to WebLogic managed servers that are often distributed across multiple machines and geographic locations. JBoss EAP 6 on the other hand has no equivalent technology. Whole server instances must be managed individually. - WebLogic Server 12c Node Manager supports Coherence to boost performance when managing servers. JBoss EAP 6 on the other hand has no similar technology. There is no way to coordinate JBoss and infiniband instances provided by JBoss using high throughput and low latency protocols like InfiniBand. The Node Manager feature also allows another very important feature that JBoss EAP lacks: secure the administration. When using WebLogic Node Manager, all the administration tasks are sent to the managed servers in a secure tunel protected by a certificate, which means that the transport layer that separates the WebLogic administration console from the managed servers are secured by SSL. - WebLogic Server 12c are now integrated with OTD ("Oracle Traffic Director") which is a web server technology derived from the former Sun iPlanet Web Server. This software complements the web server support offered by OHS ("Oracle HTTP Server"). Using OTD, WebLogic instances are load-balanced by a high powerful software that knows how to handle SDP ("Socket Direct Protocol") over InfiniBand, which boost performance when used with engineered systems technologies like Oracle Exalogic Elastic Cloud. JBoss EAP 6 on the other hand only offers support to Apache Web Server with custom modules created to deal with JBoss clusters, but only across standard TCP/IP networks.  2) Application and Runtime Diagnostics - WebLogic Server 12c have diagnostics capabilities embedded on the server called WLDF ("WebLogic Diagnostic Framework") so there is no need to rely on third-part tools. JBoss EAP 6 on the other hand has no diagnostics capabilities. Their only diagnostics tool is the log generated by the application server. Admin people are encouraged to analyse thousands of log lines to find out what is going on. - WebLogic Server 12c complement WLDF with JRockit MC ("Mission Control"), which provides to administrators and developers a complete insight about the JVM performance, behavior and possible bottlenecks. WebLogic Server 12c also have an classloader analysis tool embedded, and even a log analyzer tool that enables administrators and developers to view logs of multiple servers at the same time. JBoss EAP 6 on the other hand relies on third-part tools to do something similar. Again, only log searching are offered to find out whats going on. - WebLogic Server 12c offers end-to-end traceability and monitoring available through Oracle EM ("Enterprise Manager"), including monitoring of business transactions that flows through web servers, ESBs, application servers and database servers, all of this with high deep JVM analysis and diagnostics. JBoss EAP 6 on the other hand, even using JBoss ON ("Operations Network"), which is a separated technology, does not support those features. Red Hat relies on third-part tools to provide direct Oracle database traceability across JVMs. One of those tools are Oracle EM for non-Oracle middleware that manage JBoss, Tomcat, Websphere and IIS transparently. - WebLogic Server 12c with their JRockit support offers a tool called JRockit Flight Recorder, which can give developers a complete visibility of a certain period of application production monitoring with zero extra overhead. This automatic recording allows you to deep analyse threads latency, memory leaks, thread contention, resource utilization, stack overflow damages and GC ("Garbage Collection") cycles, to observe in real time stop-the-world phenomenons, generational, reference count and parallel collects and mutator threads analysis. JBoss EAP 6 don't even dream to support something similar, even because they don't have their own JVM. 3) Application Server Administration - WebLogic Server 12c offers a complete administration console complemented with scripting and macro-like recording capabilities. A single WebLogic console can managed up to hundreds of WebLogic servers belonging to the same domain. JBoss EAP 6 on the other hand has a limited console and provides a XML centric administration. JBoss, after ten years, started the development of a rudimentary centralized administration that still leave a lot of administration tasks aside, so admin people and developers must touch scripts and XML configuration files for most advanced and even simple administration tasks. This lead applications to error prone and risky deployments. Even using JBoss ON, JBoss EAP are not able to offer decent administration features for admin people which must be high skilled in JBoss internal architecture and its managing capabilities. - Oracle EM is available to manage multiple domains, databases, application servers, operating systems and virtualization, with a complete end-to-end visibility. JBoss ON does not provide management capabilities across the complete architecture, only basic monitoring. Even deployment must be done aside JBoss ON which does no integrate well with others softwares than JBoss. Until now, JBoss ON does not supports JBoss EAP 6, so even their minimal support for JBoss are not available for JBoss EAP 6 leaving customers uncovered and subject to high skilled JBoss admin people. - WebLogic Server 12c has the same administration model whatever is the topology selected by the customer. JBoss EAP 6 on the other hand differentiates between two operational models: standalone-mode and domain-mode, that are not consistent with each other. Depending on the mode used, the administration skill is different. - WebLogic Server 12c has no point-of-failures processes, and it does not need to define any specialized server. Domain model in WebLogic is available for years (at least ten years or more) and is production proven. JBoss EAP 6 on the other hand needs special processes to garantee JBoss integrity, the PC ("Process-Controller") and the HC ("Host-Controller"). Different from WebLogic, the domain model in JBoss is quite new (one year at tops) of maturity, and need to mature considerably until start doing things like WebLogic domain model does. - WebLogic Server 12c supports parallel deployment model which enables some artifacts being deployed at the same time. JBoss EAP 6 on the other hand does not have any similar feature. Every deployment are done atomically in the containers. This means that if you have a huge EAR (an EAR of 120 MB of size for instance) and deploy onto JBoss EAP 6, this EAR will take some minutes in order to starting accept thread requests. The same EAR deployed onto WebLogic Server 12c will reduce the deployment time at least in 2X compared to JBoss. 4) Support and Upgrades - WebLogic Server 12c has patch management available. JBoss EAP 6 on the other hand has no patch management available, each JBoss EAP instance should be patched manually. To achieve such feature, you need to buy a separated technology called JBoss ON ("Operations Network") that manage this type of stuff. But until now, JBoss ON does not support JBoss EAP 6 so, in practice, JBoss EAP 6 does not have this feature. - WebLogic Server 12c supports previuous WebLogic domains without any reconfiguration since its kernel is robust and mature since its creation in 1995. JBoss EAP 6 on the other hand has a proven lack of supportability between JBoss AS 4, 5, 6 and 7. Different kernels and messaging engines were implemented in JBoss stack in the last five years reveling their incapacity to create a well architected and proven middleware technology. - WebLogic Server 12c has patch prescription based on customer configuration. JBoss EAP 6 on the other hand has no such capability. People need to create ticket supports and have their installations revised by Red Hat support guys to gain some patch prescription from them. - Oracle WebLogic Server independent of the version has 8 years of support of new patches and has lifetime release of existing patches beyond that. JBoss EAP 6 on the other hand provides patches for a specific application server version up to 5 years after the release date. JBoss EAP 4 and previous versions had only 4 years. A good question that Red Hat will argue to answer is: "what happens when you find issues after year 5"?  5) RAC ("Real Application Clusters") Support - WebLogic Server 12c ships with a specific JDBC driver to leverage Oracle RAC clustering capabilities (Fast-Application-Notification, Transaction Affinity, Fast-Connection-Failover, etc). Oracle JDBC thin driver are also available. JBoss EAP 6 on the other hand ships only the standard Oracle JDBC thin driver. Load balancing with Oracle RAC are not supported. Manual intervention in case of planned or unplanned RAC downtime are necessary. In JBoss EAP 6, situation does not reestablish automatically after downtime. - WebLogic Server 12c has a feature called Active GridLink for Oracle RAC which provides up to 3X performance on OLTP applications. This seamless integration between WebLogic and Oracle database enable more value added to critical business applications leveraging their investments in Oracle database technology and Oracle middleware. JBoss EAP 6 on the other hand has no performance gains at all, even when admin people implement some kind of connection-pooling tuning. - WebLogic Server 12c also supports transaction and web session affinity to the Oracle RAC, which provides aditional gains of performance. This is particularly interesting if you are creating a reliable solution that are distributed not only in an LAN cluster, but into a different data center. JBoss EAP 6 on the other hand has no such support. 6) Standards and Technology Support - WebLogic Server 12c is fully Java EE 6 compatible and production ready since december of 2011. JBoss EAP 6 on the other hand became fully compatible with Java EE 6 only in the community version after three months, and production ready only in a few days considering that this article was written in June of 2012. Red Hat says that they are the masters of innovation and technology proliferation, but compared with Oracle and even other proprietary vendors like IBM, they historically speaking are lazy to deliver the most newest technologies and standards adherence. - Oracle is the steward of Java, driving innovation into the platform from commercial and open-source vendors. Red Hat on the other hand does not have its own JVM and relies on third-part JVMs to complete their application server offer. 95% of Red Hat customers are using Oracle HotSpot as JVM, which means that without Oracle involvement, their support are limited exclusively to the application server layer and we all know that most problems are happens in the JVM layer. - WebLogic Server 12c supports natively JDK 7, which empower developers to explore the maximum of the Java platform productivity when writing code. This feature differentiate WebLogic from others application servers (except GlassFish that are also managed by Oracle) because the usage of JDK 7 introduce such remarkable productivity features like the "try-with-resources" enhancement, catching multiple exceptions with one try block, Strings in the switch statements, JVM improvements in terms of JDBC, I/O, networking, security, concurrency and of course, the most important feature of Java 7: native support for multiple non-Java languages. More features regarding JDK 7 can be found here. JBoss EAP 6 on the other hand does not support JDK 7 officially, they comment in their community version that "Java SE 7 can be used with JBoss 7" which does not gives you any guarantees of enterprise support for JDK 7. - Oracle WebLogic Server 12c supports integration with Spring framework allowing Spring applications to use WebLogic special transaction manager, exposing bean interfaces to WebLogic MBeans to take advantage of all WebLogic monitoring and administration advantages. JBoss EAP 6 on the other hand has no special integration with Spring. In fact, Red Hat offers a suspicious package called "JBoss Web Platform" that in theory supports Spring, but in practice this package does not offers any special integration. It is just a facility for Red Hat customers to have support from both JBoss and Spring technology using the same customer support. 7) Lightweight Development - Oracle WebLogic Server 12c and Oracle GlassFish are completely integrated and can share applications without any modifications. Starting with the 12c version, WebLogic now understands natively GlassFish deployment descriptors and specific configurations in order to offer you a truly and reliable migration path from a community Java EE application server to a enterprise middleware product like WebLogic. JBoss EAP 6 on the other hand has no support to natively reuse an existing (or still in development) application from JBoss AS community server. Users of JBoss suffer of critical issues during deployment time that includes: changing the libraries and dependencies of the application, patching the DTD or XSD deployment descriptors, refactoring of the application layers due classloading issues and anomalies, rebuilding of persistence, business and web layers due issues with "usage of the certified version of an certain dependency" or "frameworks that Red Hat potentially does not recommend" etc. If you have the culture or enterprise IT directive of developing Java EE applications using community middleware to in a certain future, transition to enterprise (supported by a vendor) middleware, Oracle WebLogic plus Oracle GlassFish offers you a more sustainable solution. - WebLogic Server 12c has a very light ZIP distribution (less than 165 MB). JBoss EAP 6 ZIP size is around 130 MB, together with JBoss ON you have more 100 MB resulting in a higher download footprint. This is particularly interesting if you plan to use automated setup of application server instances (for example, to rapidly setup a development or staging environment) using Maven or Hudson. - WebLogic Server 12c has a complete integration with Maven allowing developers to setup WebLogic domains with few commands. Tasks like downloading WebLogic, installation, domain creation, data sources deployment are completely integrated. JBoss EAP 6 on the other hand has a limited offer integration with those tools.  - WebLogic Server 12c has a startup mode called WLX that turns-off EJB, JMS and JCA containers leaving enabled only the web container with Java EE 6 web profile. JBoss EAP 6 on the other hand has no such feature, you need to disable manually the containers that you do not want to use. - WebLogic Server 12c supports fastswap, which enables you to change classes without redeployment. This is particularly interesting if you are developing patches for the application that is already deployed and you do not want to redeploy the entire application. This is the same behavior that most application servers offers to JSP pages, but with WebLogic Server 12c, you have the same feature for Java classes in general. JBoss EAP 6 on the other hand has no such support. Even JBoss EAP 5 does not support this until now. 8) JMS and Messaging - WebLogic Server 12c has a proven and high scalable JMS implementation since its initial release in 1995. JBoss EAP 6 on the other hand has a still immature technology called HornetQ, which was introduced in JBoss EAP 5 replacing everything that was implemented in the previous versions. Red Hat loves to introduce new technologies across JBoss versions, playing around with customers and their investments. And when they are asked about why they have changed the implementation and caused such a mess, their answer is always: "the previous implementation was inadequate and not aligned with the community strategy so we are creating a new a improved one". This Red Hat practice leads to uncomfortable investments that in a near future (sometimes less than a year) will be affected in someway. - WebLogic Server 12c has troubleshooting and monitoring features included on the WebLogic console and WLDF. JBoss EAP 6 on the other hand has no direct monitoring on the console, activity is reflected only on the logs, no debug logs available in case of JMS issues. - WebLogic Server 12c has extremely good performance and scalability. JBoss EAP 6 on the other hand has a JMS storage mechanism relying on Oracle database or MySQL. This means that if an issue in production happens and Red Hat affirms that an performance issue is happening due to database problems, they will not support you on the performance issue. They will orient you to call Oracle instead. - WebLogic Server 12c supports messaging enterprise features like SAF ("Store and Forward"), Distributed Queues/Topics and Foreign JMS providers support that leverage JMS implementations without compromise developer code making things completely transparent. JBoss EAP 6 on the other hand do not even dream to support such features. 9) Caching and Grid - Coherence, which is the leading and most mature data grid technology from Oracle, is available since early 2000 and was integrated with WebLogic in 2009. Coherence and WebLogic clusters can be both managed from WebLogic administrative console. Even Node Manager supports Coherence. JBoss on the other hand discontinued JBoss Cache, which was their caching implementation just like they did with the messaging implementation (JBossMQ) which was a issue for long term customers. JBoss EAP 6 ships InfiniSpan version 1.0 which is immature and lack a proven record of successful cases and reliability. - WebLogic Server 12c has a feature called ActiveCache which uses Coherence to, without any code changes, replicate HTTP sessions from both WebLogic and other application servers like JBoss, Tomcat, Websphere, GlassFish and even Microsoft IIS. JBoss EAP 6 on the other hand does have such support and even when they do in the future, they probably will support only their own application server. - Coherence can be used to manage both L1 and L2 cache levels, providing support to Oracle TopLink and others JPA compliant implementations, even Hibernate. JBoss EAP 6 and Infinispan on the other hand supports only Hibernate. And most important of all: Infinispan does not have any successful case of L1 or L2 caching level support using Hibernate, which lead us to reflect about its viability. 10) Performance - WebLogic Server 12c is certified with Oracle Exalogic Elastic Cloud and can run unchanged applications at this engineered system. This approach can benefit customers from Exalogic optimization's of both kernel and JVM layers to boost performance in terms of 10X for web, OLTP, JMS and grid applications. JBoss EAP 6 on the other hand has no investment on engineered systems: customers do not have the choice to deploy on a Java ultra fast system if their project becomes relevant and performance issues are detected. - WebLogic Server 12c maintains a performance gain across each new release: starting on WebLogic 5.1, the overall performance gain has been close to 4X, which close to a 20% gain release by release. JBoss on the other hand does not provide SPECJAppServer or SPECJEnterprise performance benchmarks. Their so called "performance gains" remains hidden in their customer environments, which lead us to think if it is true or not since we will never get access to those environments. - WebLogic Server 12c has industry performance benchmarks with submissions across platforms and configurations leading SPECJ. Oracle WebLogic leads SPECJAppServer performance in multiple categories, fitting all customer topologies like: dual-node, single-node, multi-node and multi-node with RAC. JBoss... again, does not provide any SPECJAppServer performance benchmarks. - WebLogic Server 12c has a feature called work manager which allows your application to embrace new performance levels based on critical resource utilization of the CPUs usage. Work managers prioritizes work and allocates threads based on an execution model that takes into account administrator-defined parameters and actual run-time performance and throughput. JBoss EAP 6 on the other hand has no compared feature and probably they never will. Not supporting such feature like work managers, JBoss EAP 6 forces admin people and specially developers to uncover performance gains in a intrusive way, rewriting the code and doing performance refactorings. 11) Professional Services Support - WebLogic Server 12c and any other technology sold by Oracle give customers the possibility of hire OCS ("Oracle Consulting Services") to manage critical scenarios, deployment assistance of new applications, high skilled consultancy of architecture, best practices and people allocation together with customer teams. All OCS services are available without any restrictions, having the customer bought software from Oracle or just starting their implementation before any acquisition. JBoss EAP 6 or Red Hat to be more specifically, only offers professional services if you buy subscriptions from them. If you are developing a new critical application for your business and need the help of Red Hat for a serious issue or architecture decision, they will probably say: "OK... I can help you but after you buy subscriptions from me". Red Hat also does not allows their professional services consultants to manage environments that uses community based software. They will probably force you to first buy a subscription, download their "enterprise" version and them, optionally hire their consultants. - Oracle provides you our university to educate your team into our technologies, including of course specialized trainings of WebLogic application server. At any time and location, you can hire Oracle to train your team so you get trustful knowledge according to your specific needs. Certifications for the products are also available if your technical people desire to differentiate themselves as professionals. Red Hat on the other hand have a limited pool of resources to train your team in their technologies. Basically they are selling training and certification for RHEL ("Red Hat Enterprise Linux") but if you demand more specialized training in JBoss middleware, they will probably connect you to some "certified" partner localized training since they are apparently discontinuing their education center, at least here in Brazil. They were not able to reproduce their success with RHEL education to their middleware division since they need first sell the subscriptions to after gives you specialized training. And again, they only offer you specialized training based on their enterprise version (EAP in the case of JBoss) which means that the courses will be a quite outdated. There are reports of developers that took official training's from Red Hat at this year (2012) and in a certain JBoss advanced course, Red Hat supposedly covered JBossMQ as the messaging subsystem, and even the printed material provided was based on JBossMQ since the training was created for JBoss EAP 4.3. 12) Encouraging Transparency without Ulterior Motives - WebLogic Server 12c like any other software from Oracle can be downloaded any time from anywhere, you should only possess an OTN ("Oracle Technology Network") credential and you can download any enterprise software how many times you want. And is not some kind of "trial" version. It is the official binaries that will be running for ever in your data center. Oracle does not encourages the usage of "specific versions" of our software. The binaries you buy from Oracle are the same binaries anyone in the world could download and use for testing and personal education. JBoss EAP 6 on the other hand are not available for download unless you buy a subscription and get access to the Red Hat enterprise repositories. If you need to test, learn or just start creating your application using Red Hat's middleware software, you should download it from the community website. You are not allowed to download the enterprise version that, according to Red Hat are more secure, reliable and robust. But no one of us want to start the development of a software with an unsecured, unreliable and not scalable middleware right? So what you do? You are "invited" by Red Hat to buy subscriptions from them to get access to the "cool" version of the software. - WebLogic Server 12c prices are publicly available in the Oracle website. If you want to know right now how much WebLogic will cost to your organization, just click here and get access to our price list. In the case of WebLogic, check out the "US Oracle Technology Commercial Price List". Oracle also encourages you to get in touch with a sales representative to discuss discounts that would make possible the investment into our technology. But you are not required to do this, only if you are interested in buying our technology or maybe you want to discuss some discount scenarios. JBoss EAP 6 on the other hand does not have its cost publicly available in Red Hat's website or in any other media, at least is not so easy to get such information. The only link you will possibly find in their website is a "Contact a Sales Representative" link. This is not a very good relationship between an customer and an vendor. This is not an example of transparency, mainly when the software are sold as open. In this situations, customers expects to see the software prices publicly available, so they can have the chance to decide, based on the existing features of the software, if the cost is fair or not. Conclusion Oracle WebLogic is the most mature, secure, reliable and scalable Java EE application server of the market, and have a proven record of success around the globe to prove it's majority. Don't lose the chance to discover today how WebLogic could fit your needs and sustain your global IT middleware strategy, no matter if your strategy are completely based on the Cloud or not.

    Read the article

  • ???TCO?????????!? WebLogic Server vs. JBoss Enterprise Application Platform

    - by Tatsuhiro Yamaguchi
    WebLogic Server?????????????Java EE??????????·?????JBoss Enterprise Application Platform(EAP)????????????????WebLogic Server?????????JBoss EAP????????????????????????????????????????TCO(??????)???????????...?????????????????????????1?????????????????????????????????TCO?JBoss EAP??WebLogic Server??????????????????????(???) ????????????????????????WebLogic Server??Java????????????? Java EE??????????·???????????WebLogic Server????????????????????·?????????????????????JBoss EAP??JBoss EAP?????????????????????·??????????????????????????????????????????????????????????????????? ????????·?????????????????????????????????1?????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? ?????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? ????????????????Java??????????????????????????Java SE 6?????????????2013?2????????????????????????????????????????? ?????? Java SE 6????????????????(Oracle Technology Network) ???????????????JBoss EAP 5????Java SE 6??????????2013?2??????????????????????????????????????? ?????2012?8????????????JBoss EAP 6????????? ????Java SE 7?????????Java SE 7?????????????2014?7??????????JBoss EAP 6????????????2013??????????????????????????????Java SE 7???????????????1????????????????????????????Java SE 7????????????????????Java SE??????????????????????????????? ???????WebLogic Server??????????????????Java SE???????????????????Java SE 6?2016?12????Java SE 7?????2019?7???????????????????????????????????????????WebLogic Server????????????????????????????????Java SE??????????? JBoss EAP?????????????????Java SE????????????Java SE???????????????????????WebLogic Server??????????????????JBoss EAP?????????????????????????????????? ??????????????????WebLogic Server?????????????????? ??????????????????JBoss EAP?WebLogic Server????????????1????????????????WebLogic Server????????????????????????????????????????????????????????????????? ???JBoss EAP?????????????????????????????????????????????????????????????????????????????????????????WebLogic Server??????????????????????? ?????????????????????????????????????????????WebLogic Server?JBoss EAP?????????????????????????????????????????????????????????????????????????????????????????????????????WebLogic Server?JBoss EAP????????????? ??????????????? 3~6????????WebLogic Server????????????????????????WebLogic Server??? ??????????????????????????????????????????????????? JBoss EAP??2????????????24??365????????????Premium?????(??~??)9?~5????????????Standard??????????????????????????(CPU?????????????16??)???????????6???????????????????? · JBoss EAP Standard · JBoss EAP Premium » ???????:?0 » ???????:?0 » ??????:?85?/1?? » ??????:?125?/1?? » 6?????:?85?×6?=?510? » 6?????:?125?×6=?750? ???WebLogic Server???????????????????????????????/?????????CPU??????(CPU????????)?8???CPU?2?(CPU???=16??)??????????????????????6?????????????? · WebLogic Server Standard Edition » ???????:?216?(?108?×2CPU) » ????:?48?/1??(?24?×2CPU) ?????????22% » 6?????:?216+?48?×6=?504? ????JBoss EAP Standard??Premium?WebLogic Server Standard Edition???????????????????? ???????JBoss EAP Premium???3?????Standard??6????????????? ???????????WebLogic Server Standard Edition?????????????????????JBoss EAP????CPU??????????WebLogic Server Standard Edition?CPU?????????????1CPU????????????????????WebLogic Server Standard Edition????????????? ?????WebLogic Server??Java???????????????????????????????????????JBoss EAP?????????????Java SE????????????????????????WebLogic Server???????? ????WebLogic Server???????????????????????????????????JBoss EAP???????????????????????????????????????WebLogic Server?????????????????????WebLogic Server??????????????·??????????????????? ???2012?9????Oracle Technolorgy Network???????????WebLogic Server???????????????????????????????????????????????????????? ????????????????????????????????JBoss EAP????TCO???????????????????????????????????WebLogic Server????????????????????????????WebLogic Server????????????????????????????????????????????

    Read the article

  • .Net Reflector 6.5 EAP now available

    - by CliveT
    With the release of CLR 4 being so close, we’ve been working hard on getting the new C# and VB language features implemented inside Reflector. The work isn’t complete yet, but we have some of the features working. Most importantly, there are going to be changes to the Reflector object model, and we though it would be useful for people to see the changes and have an opportunity to comment on them. Before going any further, we should tell you what the EAP contains that’s different from the released version. A number of bugs have been fixed, mainly bugs that were raised via the forum. This is slightly offset by the fact that this EAP hasn’t had a whole lot of testing and there may have been new bugs introduced during the development work we’ve been doing. The C# language writer has been changed to display in and out co- and contra-variance markers on interfaces and delegates, and to display default values for optional parameters in method definitions. We also concisely display values passed by reference into COM calls. However, we do not change callsites to display calls using named parameters; this looks like hard work to get right. The forthcoming version of the C# language introduces dynamic types and dynamic calls. The new version of Reflector should display a dynamic call rather than the generated C#: dynamic target = MyTestObject(); target.Hello("Mum"); We have a few bugs in this area where we are not casting to dynamic when necessary. These have been fixed on a branch and should make their way into the next EAP. To support the dynamic features, we’ve added the types IDynamicMethodReferenceExpression, IDynamicPropertyIndexerExpression, and IDynamicPropertyReferenceExpression to the object model. These types, based on the versions without “Dynamic” in the name, reflect the fact that we don’t have full information about the method that is going to be called, but only have its name (as a string). These interfaces are going to change – in an internal version, they have been extended to include information about which parameter positions use runtime types and which use compile time types. There’s also the interface, IDynamicVariableDeclaration, that can be used to determine if a particular variable is used at dynamic call sites as a target. A couple of these language changes have also been added to the Visual Basic language writer. The new features are exposed only when the optimization level is set to .NET 4. When the level is set this high, the other standard language writers will simply display a message to say that they do not handle such an optimization level. Reflector Pro now has 4.0 as an optional compilation target and we have done some work to get the pdb generation right for these new features. The EAP version of Reflector no longer installs the add-in on startup. The first time you run the EAP, it displays the integration options dialog. You can use the checkboxes to select the versions of Visual Studio into which you want to install the EAP version. Note that you can only have one version of Reflector Pro installed in Visual Studio; if you install into a Visual Studio that has another version installed, the previous version will be removed. Please try it out and send your feedback to the EAP forum.

    Read the article

  • NPS EAP authentication failing after Windows Update

    - by sqlreader
    I have a Windows 2008 Std server running NPS. After applying the latest round of updates (including Root Certificates for April 2012 KB931125 (See:http://support.microsoft.com/kb/933430/)), EAP authentication is failing due to being malformed. Sample error (Security/Event ID 6273), truncated for brevity: Authentication Details: Proxy Policy Name: Use Windows authentication for all users Network Policy Name: Wireless Access Authentication Provider: Windows Authentication Server: nps-host.corp.contoso.com Authentication Type: PEAP EAP Type: - Account Session Identifier: - Reason Code: 266 Reason: The message received was unexpected or badly formatted. The NPS policy (Wireless Access) is configured accordingly (for Constraints/Authentication methods) EAP Types: Microsoft: Protected EAP (PEAP) - with a valid certificate from ADCS Microsoft: Secured password (EAP-MSCHAP v2) Less secure authentication methods: Microsoft Encrypted Authentication version 2 (MS-CHAP-v2) User can change password after it has expired Microsoft Encrypted Authentication (MS-CHAP) User can change password after it has expired We've tested a different RADIUS server without the aforementioned patch, and removed EAP as an authentication type and experienced success. Has anyone else experienced this issue?

    Read the article

  • Radius Authorization against ActiveDirectory and the users file

    - by mohrphium
    I have a problem with my freeradius server configuration. I want to be able to authenticate users against Windows ActiveDirectory (2008 R2) and the users file, because some of my co-workers are not listed in AD. We use the freeradius server to authenticate WLAN users. (PEAP/MSCHAPv2) AD Authentication works great, but I still have problems with the /etc/freeradius/users file When I run freeradius -X -x I get the following: Mon Jul 2 09:15:58 2012 : Info: ++++[chap] returns noop Mon Jul 2 09:15:58 2012 : Info: ++++[mschap] returns noop Mon Jul 2 09:15:58 2012 : Info: [suffix] No '@' in User-Name = "testtest", looking up realm NULL Mon Jul 2 09:15:58 2012 : Info: [suffix] Found realm "NULL" Mon Jul 2 09:15:58 2012 : Info: [suffix] Adding Stripped-User-Name = "testtest" Mon Jul 2 09:15:58 2012 : Info: [suffix] Adding Realm = "NULL" Mon Jul 2 09:15:58 2012 : Info: [suffix] Authentication realm is LOCAL. Mon Jul 2 09:15:58 2012 : Info: ++++[suffix] returns ok Mon Jul 2 09:15:58 2012 : Info: [eap] EAP packet type response id 1 length 13 Mon Jul 2 09:15:58 2012 : Info: [eap] No EAP Start, assuming it's an on-going EAP conversation Mon Jul 2 09:15:58 2012 : Info: ++++[eap] returns updated Mon Jul 2 09:15:58 2012 : Info: [files] users: Matched entry testtest at line 1 Mon Jul 2 09:15:58 2012 : Info: ++++[files] returns ok Mon Jul 2 09:15:58 2012 : Info: ++++[expiration] returns noop Mon Jul 2 09:15:58 2012 : Info: ++++[logintime] returns noop Mon Jul 2 09:15:58 2012 : Info: [pap] WARNING: Auth-Type already set. Not setting to PAP Mon Jul 2 09:15:58 2012 : Info: ++++[pap] returns noop Mon Jul 2 09:15:58 2012 : Info: +++- else else returns updated Mon Jul 2 09:15:58 2012 : Info: ++- else else returns updated Mon Jul 2 09:15:58 2012 : Info: Found Auth-Type = EAP Mon Jul 2 09:15:58 2012 : Info: # Executing group from file /etc/freeradius/sites-enabled/default Mon Jul 2 09:15:58 2012 : Info: +- entering group authenticate {...} Mon Jul 2 09:15:58 2012 : Info: [eap] EAP Identity Mon Jul 2 09:15:58 2012 : Info: [eap] processing type tls Mon Jul 2 09:15:58 2012 : Info: [tls] Initiate Mon Jul 2 09:15:58 2012 : Info: [tls] Start returned 1 Mon Jul 2 09:15:58 2012 : Info: ++[eap] returns handled Sending Access-Challenge of id 199 to 192.168.61.11 port 3072 EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x85469e2a854487589fb1196910cb8ae3 Mon Jul 2 09:15:58 2012 : Info: Finished request 125. Mon Jul 2 09:15:58 2012 : Debug: Going to the next request Mon Jul 2 09:15:58 2012 : Debug: Waking up in 2.4 seconds. After that it repeats the login attempt and at some point tries to authenticate against ActiveDirectory with ntlm, which doesn't work since the user exists only in the users file. Can someone help me out here? Thanks. PS: Hope this helps, freeradius trying to auth against AD: Mon Jul 2 09:15:58 2012 : Info: ++[chap] returns noop Mon Jul 2 09:15:58 2012 : Info: ++[mschap] returns noop Mon Jul 2 09:15:58 2012 : Info: [suffix] No '@' in User-Name = "testtest", looking up realm NULL Mon Jul 2 09:15:58 2012 : Info: [suffix] Found realm "NULL" Mon Jul 2 09:15:58 2012 : Info: [suffix] Adding Stripped-User-Name = "testtest" Mon Jul 2 09:15:58 2012 : Info: [suffix] Adding Realm = "NULL" Mon Jul 2 09:15:58 2012 : Info: [suffix] Authentication realm is LOCAL. Mon Jul 2 09:15:58 2012 : Info: ++[suffix] returns ok Mon Jul 2 09:15:58 2012 : Info: ++[control] returns ok Mon Jul 2 09:15:58 2012 : Info: [eap] EAP packet type response id 7 length 67 Mon Jul 2 09:15:58 2012 : Info: [eap] No EAP Start, assuming it's an on-going EAP conversation Mon Jul 2 09:15:58 2012 : Info: ++[eap] returns updated Mon Jul 2 09:15:58 2012 : Info: [files] users: Matched entry testtest at line 1 Mon Jul 2 09:15:58 2012 : Info: ++[files] returns ok Mon Jul 2 09:15:58 2012 : Info: ++[smbpasswd] returns notfound Mon Jul 2 09:15:58 2012 : Info: ++[expiration] returns noop Mon Jul 2 09:15:58 2012 : Info: ++[logintime] returns noop Mon Jul 2 09:15:58 2012 : Info: [pap] WARNING: Auth-Type already set. Not setting to PAP Mon Jul 2 09:15:58 2012 : Info: ++[pap] returns noop Mon Jul 2 09:15:58 2012 : Info: Found Auth-Type = EAP Mon Jul 2 09:15:58 2012 : Info: # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel Mon Jul 2 09:15:58 2012 : Info: +- entering group authenticate {...} Mon Jul 2 09:15:58 2012 : Info: [eap] Request found, released from the list Mon Jul 2 09:15:58 2012 : Info: [eap] EAP/mschapv2 Mon Jul 2 09:15:58 2012 : Info: [eap] processing type mschapv2 Mon Jul 2 09:15:58 2012 : Info: [mschapv2] # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel Mon Jul 2 09:15:58 2012 : Info: [mschapv2] +- entering group MS-CHAP {...} Mon Jul 2 09:15:58 2012 : Info: [mschap] Creating challenge hash with username: testtest Mon Jul 2 09:15:58 2012 : Info: [mschap] Told to do MS-CHAPv2 for testtest with NT-Password Mon Jul 2 09:15:58 2012 : Info: [mschap] expand: --username=%{mschap:User-Name:-None} -> --username=testtest Mon Jul 2 09:15:58 2012 : Info: [mschap] No NT-Domain was found in the User-Name. Mon Jul 2 09:15:58 2012 : Info: [mschap] expand: %{mschap:NT-Domain} -> Mon Jul 2 09:15:58 2012 : Info: [mschap] ... expanding second conditional Mon Jul 2 09:15:58 2012 : Info: [mschap] expand: --domain=%{%{mschap:NT-Domain}:-AD.CXO.NAME} -> --domain=AD.CXO.NAME Mon Jul 2 09:15:58 2012 : Info: [mschap] mschap2: 82 Mon Jul 2 09:15:58 2012 : Info: [mschap] Creating challenge hash with username: testtest Mon Jul 2 09:15:58 2012 : Info: [mschap] expand: --challenge=%{mschap:Challenge:-00} -> --challenge=dd441972f987d68b Mon Jul 2 09:15:58 2012 : Info: [mschap] expand: --nt-response=%{mschap:NT-Response:-00} -> --nt-response=7e6c537cd5c26093789cf7831715d378e16ea3e6c5b1f579 Mon Jul 2 09:15:58 2012 : Debug: Exec-Program output: Logon failure (0xc000006d) Mon Jul 2 09:15:58 2012 : Debug: Exec-Program-Wait: plaintext: Logon failure (0xc000006d) Mon Jul 2 09:15:58 2012 : Debug: Exec-Program: returned: 1 Mon Jul 2 09:15:58 2012 : Info: [mschap] External script failed. Mon Jul 2 09:15:58 2012 : Info: [mschap] FAILED: MS-CHAP2-Response is incorrect Mon Jul 2 09:15:58 2012 : Info: ++[mschap] returns reject Mon Jul 2 09:15:58 2012 : Info: [eap] Freeing handler Mon Jul 2 09:15:58 2012 : Info: ++[eap] returns reject Mon Jul 2 09:15:58 2012 : Info: Failed to authenticate the user. Mon Jul 2 09:15:58 2012 : Auth: Login incorrect (mschap: External script says Logon failure (0xc000006d)): [testtest] (from client techap01 port 0 via TLS tunnel) PPS: Maybe the problem is located here: In /etc/freeradius/modules/ntlm_auth I have set ntlm to: program = "/usr/bin/ntlm_auth --request-nt-key --domain=AD.CXO.NAME --username=%{mschap:User-Name} --password=%{User-Password}" I need this, so users can login without adding @ad.cxo.name to their usernames. But how can I tell freeradius to try both logins, [email protected] (should fail) testtest (against users file - should work)

    Read the article

  • News From EAP Testing

    - by Fatherjack
    There is a phrase that goes something like “Watch the pennies and the pounds/dollars will take care of themselves”, meaning that if you pay attention to the small things then the larger things are going to fare well too. I am lucky enough to be a Friend of Red Gate and once in a while I get told about new features in their tools and have a test copy of the software to trial. I got one of those emails a week or so ago and I have been exploring the SQL Prompt 6 EAP since then. One really useful feature of long standing in SQL Prompt is the idea of a code snippet that is automatically pasted into the SSMS editor when you type a few key letters. For example I can type “ssf” and then press the tab key and the text is expanded to SELECT * FROM. There are lots of these combinations and it is possible to create your own really easily. To create your own you use the Snippet Manager interface to define the shortcut letters and the code that you want to have put in their place. Let’s look at an example. Say I am writing a blog about something and want to have the demo code create a temporary table. It might looks like this; The first time you run the code everything is fine, a lovely set of dates fill the results grid but run it a second time and this happens.   Yep, we didn’t destroy the temporary table so the CREATE statement fails when it finds the table already exists. No matter, I have a snippet created that takes care of this.   Nothing too technical here but you will see that in the Code section there is $CURSOR$, this isn’t a TSQL keyword but a marker for SQL Prompt to place the cursor in that position when the Code is pasted into the SSMS Editor. I just place my cursor above the CREATE statement and type “ifobj” – the shortcut for my code to DROP the temporary table – which has been defined in the Snippet Manager as below. This means I am right-away ready to type the name of the offending table. Pretty neat and it’s been very useful in saving me lots of time over many years.   The news for SQL Prompt 6 is that Red Gate have added a new Snippet Command of $PASTE$. Let’s alter our snippet to the following and try it out   Once again, we will type type “ifobj” in the SSMS Editor but first of all, highlight the name of the table #TestTable and copy it to your clipboard. Now type “ifobj” and press Tab… Wherever the string $PASTE$ is placed in the snippet, the contents of your clipboard are merged into the pasted TSQL. This means I don’t need to type the table name into the code snippet, it’s already there and I am seeing a fully functioning piece of TSQL ready to run. This means it is it even easier to write TSQL quickly and consistently. Attention to detail like this from Red Gate means that their developer tools stay on track to keep winning awards year after year and help take the hard work out of writing neat, accurate TSQL. If you want to try out SQL Prompt all the details are at http://www.red-gate.com/products/sql-development/sql-prompt/.

    Read the article

  • ReSharper 8.0 EAP now available

    - by TATWORTH
    Originally posted on: http://geekswithblogs.net/TATWORTH/archive/2013/06/28/resharper-8.0-eap-now-available.aspxJetbrains have just released |ReSharper 8.0 Beta on their Early Access |Programme at http://www.jetbrains.com/resharper/whatsnew/?utm_source=resharper8b&utm_medium=newsletter&utm_campaign=resharper&utm_content=customersResharper 8.0 comes with the following new features:Support for Visual Studio 2013 Preview. Yes, ReSharper is known to work well with the fresh preview of Visual Studio 2013, and if you have already started digging into it, ReSharper 8.0 Beta is ready for the challenge.Faster code fixes. Thanks to the new Fix in Scope feature, you can choose to batch-fix some of the code issues that ReSharper detects in the scope of a project or the whole solution. Supported fixes include removing unused directives and redundant casts.Project dependency viewer. ReSharper is now able to visualize a project dependency graph for a bird's eye view of dependencies within your solution, all without compiling anything!Multifile templates. ReSharper's file templates can now be expanded to generate more than one file. For instance, this is handy for generating pairs of a main logic class and a class for extensions, or sets of partial files.Navigation improvements. These include a new action called Go to Everything to let you search for a file, type or method name from the same input box; support for line numbers in navigation actions; a new tool window called Assembly Explorer for browsing through assemblies; and two more contextual navigation actions: Navigate to Generic Substitutions and Navigate to Assembly Explorer.New solution-wide refactorings. The set of fresh refactorings is headlined by the highly requested Move Instance Method to move methods between classes without making them static. In addition, there are Inline Parameter and Pull Parameter. Last but not least, we're also introducing 4 new XAML-specific refactorings!Extraordinary XAML support. A plethora of new and improved functionality for all developers working with XAML code includes dedicated grid inspections and quick-fixes; Extract Style, Extract, Move and Inline Resource refactorings; atomic renaming of dependency properties; and a lot more.More accessible code completion. ReSharper 8 makes more of its IntelliSense magic available in automatic completion lists, including extension methods and an option to import a type. We're also introducing double completion which gives you additional completion items when you press the corresponding shortcut for the second time.A new level of extensibility. With the new NuGet-based Extension Manager, discovering, installing and uninstalling ReSharper extensions becomes extremely easy in Visual Studio 2010 and higher. When we say extensions, we mean not only full-fledged plug-ins but also sets of templates or SSR patterns that can now be shared much more easily.CSS support improvements. Smarter usage search for CSS attributes, new CSS-specific code inspections, configurable support for CSS3 and earlier versions, compatibility checks against popular browsers - there's a rough outline of what's new for CSS in ReSharper 8.A command-line version of ReSharper. ReSharper 8 goes beyond Visual Studio: we now provide a free standalone tool with hundreds of ReSharper inspections and additionally a duplicate code finder that you can integrate with your CI server or version control system.Multiple minor improvements in areas such as decompiling and code formatting, as well as support for the Blue Theme introduced in Visual Studio 2012 Update 2.

    Read the article

  • wireless ethernet adapter with EAP-PEAP?

    - by Joseph
    We have a wireless network set up to support WPA or WPA2 with AES or TKIP encryption and EAP-PEAP authentication. Users are wanting to connect devices that don't have the ability to do EAP-PEAP but have ethernet ports. I have found a wireless printer server that can do this, but I have yet to find a wireless ethernet adapter that can. Has anyone seen one with this ability?

    Read the article

  • Auth-Type :- Reject in RADIUS users file matches inner tunnel request but sends Access-Accept

    - by mgorven
    I have WPA2 802.11x EAP authentication setup using FreeRADIUS 2.1.8 on Ubuntu 10.04.4 talking to OpenLDAP, and can successfully authenticate using PEAP/MSCHAPv2, TTLS/MSCHAPv2 and TTLS/PAP (both via the AP and using eapol_test). I am now trying to restrict access to specific SSIDs based on the LDAP groups which the user belongs to. I have configured group membership checking in /etc/freeradius/modules/ldap like so: groupname_attribute = cn groupmembership_filter = "(|(&(objectClass=posixGroup)(memberUid=%{User-Name}))(&(objectClass=posixGroup)(uniquemember=%{User-Name})))" and I have configured extraction of the SSID from Called-Station-Id into Called-Station-SSID based on the Mac Auth wiki page. In /etc/freeradius/eap.conf I have enabled copying attributes from the outer tunnel into the inner tunnel, and usage of the inner tunnel response in the outer tunnel (for both PEAP and TTLS). I had the same behaviour before changing these options however. copy_request_to_tunnel = yes use_tunneled_reply = yes I'm running eapol_test like this to test the setup: eapol_test -c peap-mschapv2.conf -a 172.16.0.16 -s testing123 -N 30:s:01-23-45-67-89-01:Example-EAP with the following peap-mschapv2.conf file: network={ ssid="Example-EAP" key_mgmt=WPA-EAP eap=PEAP identity="mgorven" anonymous_identity="anonymous" password="foobar" phase2="autheap=MSCHAPV2" } With the following in /etc/freeradius/users: DEFAULT Ldap-Group == "employees" and running freeradius-Xx, I can see that the LDAP group retrieval works, and that the SSID is extracted. Debug: [ldap] performing search in dc=example,dc=com, with filter (&(cn=employees)(|(&(objectClass=posixGroup)(memberUid=mgorven))(&(objectClass=posixGroup)(uniquemember=mgorven)))) Debug: rlm_ldap::ldap_groupcmp: User found in group employees ... Info: expand: %{7} -> Example-EAP Next I try to only allow access to users in the employees group (regardless of SSID), so I put the following in /etc/freeradius/users: DEFAULT Ldap-Group == "employees" DEFAULT Auth-Type := Reject But this immediately rejects the Access-Request in the outer tunnel because the anonymous user is not in the employees group. So I modify it to only match inner tunnel requests like so: DEFAULT Ldap-Group == "employees" DEFAULT FreeRADIUS-Proxied-To == "127.0.0.1" Auth-Type := Reject, Reply-Message = "User does not belong to any groups which may access this SSID." Now users which are in the employees group are authenticated, but so are users which are not in the employees group. I see the reject entry being matched, and the Reply-Message is set, but the client receives an Access-Accept. Debug: rlm_ldap::ldap_groupcmp: Group employees not found or user is not a member. Info: [files] users: Matched entry DEFAULT at line 209 Info: ++[files] returns ok ... Auth: Login OK: [mgorven] (from client test port 0 cli 02-00-00-00-00-01 via TLS tunnel) Info: WARNING: Empty section. Using default return values. ... Info: [peap] Got tunneled reply code 2 Auth-Type := Reject Reply-Message = "User does not belong to any groups which may access this SSID." ... Info: [peap] Got tunneled reply RADIUS code 2 Auth-Type := Reject Reply-Message = "User does not belong to any groups which may access this SSID." ... Info: [peap] Tunneled authentication was successful. Info: [peap] SUCCESS Info: [peap] Saving tunneled attributes for later ... Sending Access-Accept of id 11 to 172.16.2.44 port 60746 Reply-Message = "User does not belong to any groups which may access this SSID." User-Name = "mgorven" and eapol_test reports: RADIUS message: code=2 (Access-Accept) identifier=11 length=233 Attribute 18 (Reply-Message) length=64 Value: 'User does not belong to any groups which may access this SSID.' Attribute 1 (User-Name) length=9 Value: 'mgorven' ... SUCCESS Why isn't the request being rejected, and is this the right way to implement this?

    Read the article

  • java.lang.NoClassDefFoundError: Could not initialize class org.apache.poi.POIXMLDocument on Jboss 5.0 EAP

    - by nidhin
    Getting following exception in Jboss 5.0 EAP but it work fine in JBoss 5.1 GA. we are using POI 3.7 and jars included are poi-3.7.jar poi-ooxml-schemas.jar poi-ooxml.jar The stack trace is ERROR [org.apache.catalina.core.ContainerBase.[jboss.ueb].[localhost].[fesbcon-Fig].[Faces Servlet]] 3;13;44.4g3pM (http-0.0.0.0-8280-1) Servlet.service() -For servlet Faces Servlet threu exception java.lang.NoClassDe-FFoundError: Could not initialize class org.apache.poi.POIXMLDocument at org.apache.poi.ss.usermodel.HorkbookFactory.create(HorkbookFactory.java:62) at com.-Ferguson.esb.con-Fig.controller.AssociationsExcelUploadController.submit(Unknoun Source) at sun.re-Flect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.re-Flect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.re-Flect.DelegatingMethodAccessorImpl.invoke(Delegating?ethodAccessorImpl.java:25) at java.lang.re-Flect.Method.invoke(Method.java:597) at org.apache.my-Faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:132) at org.apache.my-Faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:61) Please Advise how to solve this issue in JBoss 5.0 EAP

    Read the article

  • Macbook Pro Wireless Reconnecting

    - by A Student at a University
    I'm using a WPA2 EAP network. I'm sitting next to the access point. The connection keeps dropping and taking ~10 seconds to reconnect. My other devices are staying online. What's causing it? syslog: 01:21:10 dhclient: DHCPREQUEST of XXX.XXX.XXX.XXX on eth1 to XXX.XXX.XXX.XXX port 67 01:21:10 dhclient: DHCPACK of XXX.XXX.XXX.XXX from XXX.XXX.XXX.XXX 01:21:10 NetworkManager[XX40]: <info> (eth1): DHCPv4 state changed reboot -> renew 01:21:10 NetworkManager[XX40]: <info> address XXX.XXX.XXX.XXX 01:21:10 NetworkManager[XX40]: <info> prefix 20 (XXX.XXX.XXX.XXX) 01:21:10 NetworkManager[XX40]: <info> gateway XXX.XXX.XXX.XXX 01:21:10 NetworkManager[XX40]: <info> nameserver 'XXX.XXX.XXX.XXX' 01:21:10 NetworkManager[XX40]: <info> nameserver 'XXX.XXX.XXX.XXX' 01:21:10 NetworkManager[XX40]: <info> nameserver 'XXX.XXX.XXX.XXX' 01:21:10 NetworkManager[XX40]: <info> domain name 'server.domain.tld' 01:21:10 dhclient: bound to XXX.XXX.XXX.XXX -- renewal in XXX seconds. 01:33:30 dhclient: DHCPREQUEST of XXX.XXX.XXX.XXX on eth1 to XXX.XXX.XXX.XXX port 67 01:33:30 dhclient: DHCPACK of XXX.XXX.XXX.XXX from XXX.XXX.XXX.XXX 01:33:30 dhclient: bound to XXX.XXX.XXX.XXX -- renewal in XXX seconds. 01:35:13 wpa_supplicant[XX60]: CTRL-EVENT-EAP-STARTED EAP authentication started 01:35:13 wpa_supplicant[XX60]: CTRL-EVENT-EAP-METHOD EAP vendor 0 method 25 (PEAP) selected 01:35:14 wpa_supplicant[XX60]: EAP-MSCHAPV2: Authentication succeeded 01:35:14 wpa_supplicant[XX60]: EAP-TLV: TLV Result - Success - EAP-TLV/Phase2 Completed 01:35:14 wpa_supplicant[XX60]: CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully 01:35:14 NetworkManager[XX40]: <info> (eth1): supplicant connection state: completed -> 4-way handshake 01:35:14 wpa_supplicant[XX60]: WPA: Key negotiation completed with XX:XX:XX:XX:XX:XX [PTK=CCMP GTK=TKIP] 01:35:14 NetworkManager[XX40]: <info> (eth1): supplicant connection state: 4-way handshake -> group handshake 01:35:14 NetworkManager[XX40]: <info> (eth1): supplicant connection state: group handshake -> completed 01:35:17 wpa_supplicant[XX60]: CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys 01:35:17 NetworkManager[XX40]: <info> (eth1): supplicant connection state: completed -> disconnected 01:35:17 NetworkManager[XX40]: <info> (eth1): supplicant connection state: disconnected -> scanning 01:35:26 wpa_supplicant[XX60]: CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys 01:35:26 NetworkManager[XX40]: <info> (eth1): supplicant connection state: scanning -> disconnected 01:35:29 NetworkManager[XX40]: <info> (eth1): supplicant connection state: disconnected -> scanning 01:35:32 NetworkManager[XX40]: <info> (eth1): device state change: 8 -> 3 (reason 11) 01:35:32 NetworkManager[XX40]: <info> (eth1): deactivating device (reason: 11). 01:35:32 NetworkManager[XX40]: <info> (eth1): canceled DHCP transaction, DHCP client pid XX27 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) starting connection 'Auto XXXXXXXXXX' 01:35:32 NetworkManager[XX40]: <info> (eth1): device state change: 3 -> 4 (reason 0) 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled... 01:35:32 NetworkManager[XX40]: <info> (eth1): supplicant connection state: scanning -> disconnected 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) started... 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) scheduled... 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) complete. 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) starting... 01:35:32 NetworkManager[XX40]: <info> (eth1): device state change: 4 -> 5 (reason 0) 01:35:32 NetworkManager[XX40]: <info> Activation (eth1/wireless): access point 'Auto XXXXXXXXXX' has security, but secrets are required. 01:35:32 NetworkManager[XX40]: <info> (eth1): device state change: 5 -> 6 (reason 0) 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) complete. 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled... 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) started... 01:35:32 NetworkManager[XX40]: <info> (eth1): device state change: 6 -> 4 (reason 0) 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) scheduled... 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) complete. 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) starting... 01:35:32 NetworkManager[XX40]: <info> (eth1): device state change: 4 -> 5 (reason 0) 01:35:32 NetworkManager[XX40]: <info> Activation (eth1/wireless): connection 'Auto XXXXXXXXXX' has security, and secrets exist. No new secrets needed. 01:35:32 NetworkManager[XX40]: <info> Config: added 'ssid' value 'XXXXXXXXXX' 01:35:32 NetworkManager[XX40]: <info> Config: added 'scan_ssid' value '1' 01:35:32 NetworkManager[XX40]: <info> Config: added 'key_mgmt' value 'WPA-EAP' 01:35:32 NetworkManager[XX40]: <info> Config: added 'password' value '<omitted>' 01:35:32 NetworkManager[XX40]: <info> Config: added 'eap' value 'PEAP' 01:35:32 NetworkManager[XX40]: <info> Config: added 'fragment_size' value 'XXX0' 01:35:32 NetworkManager[XX40]: <info> Config: added 'phase2' value 'auth=MSCHAPV2' 01:35:32 NetworkManager[XX40]: <info> Config: added 'ca_cert' value '/etc/ssl/certs/Equifax_Secure_CA.pem' 01:35:32 NetworkManager[XX40]: <info> Config: added 'identity' value 'XXXXXXX' 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) complete. 01:35:32 NetworkManager[XX40]: <info> Config: set interface ap_scan to 1 01:35:32 NetworkManager[XX40]: <info> (eth1): supplicant connection state: disconnected -> scanning 01:35:36 wpa_supplicant[XX60]: Associated with XX:XX:XX:XX:XX:XX 01:35:36 NetworkManager[XX40]: <info> (eth1): supplicant connection state: scanning -> associated 01:35:36 wpa_supplicant[XX60]: CTRL-EVENT-EAP-STARTED EAP authentication started 01:35:36 wpa_supplicant[XX60]: CTRL-EVENT-EAP-METHOD EAP vendor 0 method 25 (PEAP) selected 01:35:36 wpa_supplicant[XX60]: EAP-MSCHAPV2: Authentication succeeded 01:35:36 wpa_supplicant[XX60]: EAP-TLV: TLV Result - Success - EAP-TLV/Phase2 Completed 01:35:36 wpa_supplicant[XX60]: CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully 01:35:36 NetworkManager[XX40]: <info> (eth1): supplicant connection state: associated -> 4-way handshake 01:35:36 wpa_supplicant[XX60]: WPA: Could not find AP from the scan results 01:35:36 wpa_supplicant[XX60]: WPA: Key negotiation completed with XX:XX:XX:XX:XX:XX [PTK=CCMP GTK=TKIP] 01:35:36 wpa_supplicant[XX60]: CTRL-EVENT-CONNECTED - Connection to XX:XX:XX:XX:XX:XX completed (reauth) [id=0 id_str=] 01:35:36 NetworkManager[XX40]: <info> (eth1): supplicant connection state: 4-way handshake -> group handshake 01:35:36 NetworkManager[XX40]: <info> (eth1): supplicant connection state: group handshake -> completed 01:35:36 NetworkManager[XX40]: <info> Activation (eth1/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'XXXXXXXXXX'. 01:35:36 NetworkManager[XX40]: <info> Activation (eth1) Stage 3 of 5 (IP Configure Start) scheduled. 01:35:36 NetworkManager[XX40]: <info> Activation (eth1) Stage 3 of 5 (IP Configure Start) started... 01:35:36 NetworkManager[XX40]: <info> (eth1): device state change: 5 -> 7 (reason 0) 01:35:36 NetworkManager[XX40]: <info> Activation (eth1) Beginning DHCPv4 transaction (timeout in 45 seconds) 01:35:36 NetworkManager[XX40]: <info> dhclient started with pid XX87 01:35:36 NetworkManager[XX40]: <info> Activation (eth1) Stage 3 of 5 (IP Configure Start) complete. 01:35:36 dhclient: Internet Systems Consortium DHCP Client VXXX.XXX.XXX 01:35:36 dhclient: Copyright 2004-2009 Internet Systems Consortium. 01:35:36 dhclient: All rights reserved. 01:35:36 dhclient: For info, please visit https://www.isc.org/software/dhcp/ 01:35:36 dhclient: 01:35:36 NetworkManager[XX40]: <info> (eth1): DHCPv4 state changed nbi -> preinit 01:35:36 dhclient: Listening on LPF/eth1/XX:XX:XX:XX:XX:XX 01:35:36 dhclient: Sending on LPF/eth1/XX:XX:XX:XX:XX:XX 01:35:36 dhclient: Sending on Socket/fallback 01:35:36 dhclient: DHCPREQUEST of XXX.XXX.XXX.XXX on eth1 to XXX.XXX.XXX.XXX port 67 01:35:36 dhclient: DHCPACK of XXX.XXX.XXX.XXX from XXX.XXX.XXX.XXX 01:35:36 dhclient: bound to XXX.XXX.XXX.XXX -- renewal in XXX seconds. 01:35:36 NetworkManager[XX40]: <info> (eth1): DHCPv4 state changed preinit -> reboot 01:35:36 NetworkManager[XX40]: <info> Activation (eth1) Stage 4 of 5 (IP4 Configure Get) scheduled... 01:35:36 NetworkManager[XX40]: <info> Activation (eth1) Stage 4 of 5 (IP4 Configure Get) started... 01:35:36 NetworkManager[XX40]: <info> address XXX.XXX.XXX.XXX 01:35:36 NetworkManager[XX40]: <info> prefix 20 (XXX.XXX.XXX.XXX) 01:35:36 NetworkManager[XX40]: <info> gateway XXX.XXX.XXX.XXX 01:35:36 NetworkManager[XX40]: <info> nameserver 'XXX.XXX.XXX.XXX' 01:35:36 NetworkManager[XX40]: <info> nameserver 'XXX.XXX.XXX.XXX' 01:35:36 NetworkManager[XX40]: <info> nameserver 'XXX.XXX.XXX.XXX' 01:35:36 NetworkManager[XX40]: <info> domain name 'server.domain.tld' 01:35:36 NetworkManager[XX40]: <info> Activation (eth1) Stage 5 of 5 (IP Configure Commit) scheduled... 01:35:36 NetworkManager[XX40]: <info> Activation (eth1) Stage 4 of 5 (IP4 Configure Get) complete. 01:35:36 NetworkManager[XX40]: <info> Activation (eth1) Stage 5 of 5 (IP Configure Commit) started... 01:35:37 NetworkManager[XX40]: <info> (eth1): device state change: 7 -> 8 (reason 0) 01:35:37 NetworkManager[XX40]: <info> (eth1): roamed from BSSID XX:XX:XX:XX:XX:XX (XXXXXXXXXX) to XX:XX:XX:XX:XX:XX (XXXXXXXXX) 01:35:37 NetworkManager[XX40]: <info> Policy set 'Auto XXXXXXXXXX' (eth1) as default for IPv4 routing and DNS. 01:35:37 NetworkManager[XX40]: <info> Activation (eth1) successful, device activated. 01:35:37 NetworkManager[XX40]: <info> Activation (eth1) Stage 5 of 5 (IP Configure Commit) complete. 01:35:43 wpa_supplicant[XX60]: Trying to associate with XX:XX:XX:XX:XX:XX (SSID='XXXXXXXXXX' freq=2412 MHz) 01:35:43 NetworkManager[XX40]: <info> (eth1): supplicant connection state: completed -> associating 01:35:43 wpa_supplicant[XX60]: Association request to the driver failed 01:35:46 wpa_supplicant[XX60]: Associated with XX:XX:XX:XX:XX:XX 01:35:46 NetworkManager[XX40]: <info> (eth1): supplicant connection state: associating -> associated 01:35:46 NetworkManager[XX40]: <info> (eth1): supplicant connection state: associated -> 4-way handshake 01:35:46 wpa_supplicant[XX60]: WPA: Key negotiation completed with XX:XX:XX:XX:XX:XX [PTK=CCMP GTK=TKIP] 01:35:46 wpa_supplicant[XX60]: CTRL-EVENT-CONNECTED - Connection to XX:XX:XX:XX:XX:XX completed (reauth) [id=0 id_str=] 01:35:46 NetworkManager[XX40]: <info> (eth1): supplicant connection state: 4-way handshake -> group handshake 01:35:46 NetworkManager[XX40]: <info> (eth1): supplicant connection state: group handshake -> completed 01:40:47 wpa_supplicant[XX60]: WPA: Group rekeying completed with XX:XX:XX:XX:XX:XX [GTK=TKIP] 01:40:47 NetworkManager[XX40]: <info> (eth1): supplicant connection state: completed -> group handshake 01:40:47 NetworkManager[XX40]: <info> (eth1): supplicant connection state: group handshake -> completed 01:50:19 dhclient: DHCPREQUEST of XXX.XXX.XXX.XXX on eth1 to XXX.XXX.XXX.XXX port 67 01:50:19 dhclient: DHCPACK of XXX.XXX.XXX.XXX from XXX.XXX.XXX.XXX

    Read the article

  • Why would you use EAP-TTLS instead of PEAP?

    - by Ivan Macek
    As I understood EAP-TTLS and PEAP share same level of security when implemented in wireless networks. Both only provide server side authentication via certificate. The drawback of EAP-TTLS can be non native support in Microsoft Windows so every user has to install additional software. The benefit of EAP-TTLS can be support for less secure authentication mechanisms (PAP, CHAP, MS-CHAP) but why would you need them in modern and properly secure wireless system? What are you opinions? Why should I implement EAP-TTLS instead of PEAP? Let's say that I have most Windows users, medium Linux users and least iOS, OSX users.

    Read the article

  • How does pptpd (poptop) or pppd work with eap-tls and mppe-128?

    - by Henk
    To create a VPN I've installed pptpd on an Ubuntu domU (Debian domUs can also be created). MSCHAPv2 isn't a very strong authentication protocol so I'd like to use EAP-TLS. I've set up a FreeRADIUS server and certificates for EAP-TLS before (for use with WPA), and I've also set up a pptp server with mschap-v2 auth, but I can't figure out how to combine the two. Maybe pppd can use EAP-TLS on its own, but I can't find support for it in the Ubuntu package. If I need to patch the package, that's fine, I know how to patch Debian packages (provided the patch applies cleanly). Also, can MPPE still be used when pppd is configured to use EAP? Because it says in the manual several times that MPPE requires MSCHAP. However, other docs like this one: http://www.nikhef.nl/~janjust/ppp/ seem to refute that. The clients are running Mac OS X Leopard and GNU/Linux, there's no need to fix anything for Windows.

    Read the article

  • JBoss 4.3 eap can't find war in an ear

    - by Steveo
    I'm trying to deploy an ear to JBoss. The application.xml has entries looking like: <module id="Core_JavaModule"> <java>APP-INF/lib/core.jar</java> </module> <module id="Public_WebModule"> <web> <web-uri>public.war</web-uri> <context-root>/</context-root> </web> </module> The core.jar is read in OK, but when it tries to read public.war, I get: org.jboss.deployment.DeploymentException: Failed to find module file: public.war I've confirmed that the war directory is there; it is an exploded war. Not a war file. Is JBoss looking for a war file? Or will it grok a war directory?

    Read the article

  • How do you install/configure JBoss on Linux/Unix?

    - by mafro
    I'm currently working on how install and configure multiple (30+) JBoss EAP 5 configurations (both standalone and clusters) for development, test and production at a client's site (running SuSE). I'm not to fancy about the jboss way of storing application/configuration together with system files, so I have tried to split things up (ie moving server config out of the jboss installation directory). I also would like minimize the amount of configuration needed when upgrading/patching jboss - but I'm not done thinking about that... It would be great to hear how you've done and what you think about my approach. This is how my installations look like (for the moment): Standard JBoss EAP install (minus server configs): /opt/jboss/jboss-eap-5.0/jboss-as /opt/jboss/jboss-eap-5.0/jboss-as/bin/ /opt/jboss/jboss-eap-5.0/jboss-as/lib/ /opt/jboss/jboss-eap-5.0/jboss-as/server/ [server configs removed to avoid starting them by mistake] /opt/jboss/jboss-eap-5.0/jboss-as/.../ Application (some jboss folders has been omitted - you'll get the point anyway): /app/<project>/ [$app.dir - application specific base folder] /app/<project>/jboss/ [$jboss.home] /app/<project>/jboss/bin/ -> /opt/jboss/jboss-eap-5.0/jboss-as/bin /app/<project>/jboss/lib/ -> /opt/jboss/jboss-eap-5.0/jboss-as/lib /app/<project>/jboss/server/<cfg>/ [project specific config based on 'production'] /app/<project>/jboss/server/<cfg>/log/ -> /log/<project>/<cfg> /app/<project>/jboss/server/<cfg>/... /app/<project>/jboss/.../ -> /opt/jboss/jboss-eap-5.0/jboss-as/.../ /app/<project>/bin/ [application specific scripts for start/stop etc - wraps jboss supplied scripts] /app/<project>/deploy/ [application deploy folder] /app/<project>/etc/ [application specific config] Questions: How do you install JBoss (on linux/unix systems)? Where do you put JBoss and what modifications do you do? Where do you put your applications and application specific files? Do you share JBoss instances between applications or run one instance/cluster per application? How do you manage configuration changes (i.e. your modifications of jboss standard config)?

    Read the article

  • How to programatically create and read WEP/EAP WiFi configurations in Android?

    - by Als
    How to programatically create and read WEP/EAP WiFi configurations in Android? I have seen a number of people struggling on this very question on various forums and all across the community. I know this is not that straight forward(especially EAP) to figure out because When I wanted to acheive the same I too struggled quite a lot.Well, all the hard work of code analysis and searching various implementations on the internet done with I was finally able to acheive the goal. All the credit goes to number of open source projects and their developers. I would like to share this knowledge with all, Since SO encourages this: "It's also perfectly fine to ask and answer your own question, as long as you pretend you're on Jeopardy: phrase it in the form of a question." Part 1: Creating a WEP WiFi configuration programatically. Part 2: Read a WEP WiFi configuration programatically. Part 3: Read a EAP WiFi Configuration programatically. Part 4: Save a EAP WiFi configuration programatically.

    Read the article

  • what 802.1x key_mgmt/eap does wired network normally uses?

    - by tuma
    I'm really new to 802.1x but I'm trying to use 802.1x authentication in a wired network. My desktop is Linux (centos) using wpa_supplicant as the supplicant. I'm wondering what key_mgmt/eap is normally used in the wired environment? I went through http://en.wikipedia.org/wiki/Extensible_Authentication_Protocol but it doesn't clearly say which method/encapsulation is normally used for wired network. Can anyone give me a hint? Thanks.

    Read the article

  • Jboss EAP 5 and Tomcat 6 on the same Win env. (Jboss gets Toncat`s home page when`s up)

    - by Eddie
    Hi guys, I`m newbie to Java technologies, just trying to catch up some idea of it. I was trying to build a java environment to play with Eclipse, Mysql, Tomcat and Jboss and integrate these together. I did: 1. Installed jdk1.6.0_20 (including JAVA_HOME and path variables; I work on Win Vista), mysql 5 and eclipse-jee-galileo (the latest one, 3.6 I believe) and all went good - java programs are compiled and run getting a DB connection. 2. Installed Jboss enterprise-installer-5.0.1.jar with localhost:8080 and this also went good - run.bat started it and I could log in as admin thru its home page. I integrated it with eclipse and could start and stop it from there too. 3. I got apache-tomcat-6.0.26-windows-x86 and this also runs and stops from command line and from eclipse. But this one uses localhost:8080 without asking. Now the problem is when I start jboss I get Tomcat home page and I can`t fix it. Is it probably because both now use localhost:8080? BTW, does Jboss EAP 5 contain Tomcat inside and I shouldn't add that Tomcat separately? Thanks for you help in advance, Eddie

    Read the article

  • How to tell when my batch of EAP calls are completed?

    - by codemonkie
    This is following my question: http://stackoverflow.com/questions/2607038/c-how-to-consume-web-service-adheres-to-the-event-based-asynchronous-pattern My program is calling the DoStuffAsync() x many times in a batch, hence the callback will get invoked the same number of times upon OnComplete(). Is there a way to find out when my batch is finished such that I can generate a report on the success/failed results? All I can think of is to have a static count variable for x and deduct 1 every time OnComplete() is called, but its kind of silly and error prone I'm afraid. TIA.

    Read the article

  • Glassfish alive or dead? WebLogic SE cost is less than Glassfish!

    - by JuergenKress
    Is a hot discussion in the community in the last few days! Send us your opinion on tiwtter @wlscommunity #Glassfish #WebLogicCommunity We posted theGlassFishStrategy.pptx at our WebLogic Community Workspace (WebLogic Community membership required). Please read also the Java EE and GlassFish Server Roadmap Update Bruno Borges ?Another great article covering story about #GlassFish. Comments starting to be reasonable ;-) 6 facts helped a lot http://adtmag.com/articles/2013/11/08/oracle-drops-glassfish.aspx … Adam Bien ?What Oracle Could Do For GlassFish Now: Move the sources to GitHub (GitHub is the most popular collaboration p... http://bit.ly/1d1uo24 JAXenter.com ?Oracle evangelist: “GlassFish Open Source Edition is not dead” http://jaxenter.com/oracle-evangelist-glassfish-open-source-edition-is-not-dead-48830.html … GlassFish 6 Facts About #GlassFish Announcement and the Future of #JavaEE http://bit.ly/1bbSVPf via @brunoborges David Blevins ?In support of our #GlassFish friends and open source in general: Feed the Fish http://www.tomitribe.com/blog/2013/11/feed-the-fish/ … #JavaEE #opensource #manifesto GlassFish ?GlassFish Server Open Source Edition 4.1 is scheduled for 2014. Version 5.0 as impl for #JavaEE8 https://blogs.oracle.com/theaquarium/entry/java_ee_and_glassfish_server … #Community focused C2B2 Consulting ?C2B2 continues to offer support for your operational #JEE applications running on #GlassFish http://blog.c2b2.co.uk/2013/11/oracle-dropping-commercial-support-of.html … #Java Markus Eisele ?RT @InfoQ: #GlassFish Commercial Edition is Dead http://bit.ly/17eFB0Z < at least they agree to my points... Adam Bien suggests: Move the sources to GitHub (GitHub is the most popular collaboration platform). It is more likely for an individual to contribute via GitHub, than the current infrastructure. Introduce a business friendlier license like e.g. the Apache license. Companies interesting in providing added value (and commercial support) on top of existing sources would appreciate it. Implement GitHub-based, open source, CI system with nightly builds. Introduce a transparent voting process / pull-request acceptance process. Release more frequently. Keep https://glassfish.java.net as the main hub. C2B2 offers Glassfish support by Steve Millidge Oracle have just announced that commercial support for GlassFish 4 will not be available from Oracle. In light of this announcement I thought I would put together some thoughts about how I see this development. I think the key word in this announcement is "commercial", nowhere does Oracle announce the "death of GlassFish" in contrary Oracle reaffirm; GlassFish Server Open Source Edition continues to be the strategic foundation for Java EE reference implementation going forward. And for developers, updates will be delivered as needed to continue to deliver a great developer experience for GlassFish Server Open Source Edition so GlassFish is not about to go away soon. In a similar fashion RedHat do not provide commercial support for WildFly and only provide commercial support for JBoss EAP. Admittedly JBoss EAP and WildFly are much closer together than GlassFish and WebLogic but WildFly and JBoss EAP are absolutely NOT the same thing. The key going forward to the viability of GlassFish as a production platform is how the GlassFish community develops; How often does the community release binary builds? How open is the community to bug fixes? How much engineering resource does Oracle commit to GlassFish? At this stage we just don't know the answers to these questions. If the GlassFish open source project continues on it's current trajectory without a commercial support offering then I don't see much of a problem. Oracle just have to work harder to sell migration paths to WebLogic in the same way as RedHat have to sell migration paths from WildFly to JBoss EAP. In the meantime C2B2 continues to offer support for your operational JEE applications running on GlassFish and we will endeavour to work with the community to get any bugs fixed. The key difference is we can no longer back our Expert Support with a support contract from Oracle for patches and fixes for any release greater than 3.x. Read the complete article here. 6 Facts About GlassFish Announcement By Bruno.Borges Fact #1 - GlassFish Open Source Edition is not dead GlassFish Server Open Source Edition will remain the reference implementation of Java EE. The current trunk is where an implementation for Java EE 8 will flourish, and this will become the future GlassFish 5.0. Calling "GlassFish is dead" does no good to the Java EE ecosystem. The GlassFish Community will remain strong towards the future of Java EE. Without revenue-focused mind, this might actually help the GlassFish community to shape the next version, and set free from any ties with commercial decisions. Fact #2 - OGS support is not over As I said before, GlassFish Server Open Source Edition will continue. Main change is that there will be no more future commercial releases of Oracle GlassFish Server. New and existing OGS 2.1.x and 3.1.x commercial customers will continue to be supported according to the Oracle Lifetime Support Policy. In parallel, I believe there's no other company in the Java EE business that offers commercial support to more than one build of a Java EE application server. This new direction can actually help customers and partners, simplifying decision through commercial negotiations. Fact #3 - WebLogic is not always more expensive than OGS Oracle GlassFish Server ("OGS") is a build of GlassFish Server Open Source Edition bundled with a set of commercial features called GlassFish Server Control and license bundles such as Java SE Support. OGS has at the moment of this writing the pricelist of U$ 5,000 / processor. One information that some bloggers are mentioning is that WebLogic is more expensive than this. Fact 3.1: it is not necessarily the case. The initial edition of WebLogic is called "Standard Edition" and falls into a policy where some “Standard Edition” products are licensed on a per socket basis. As of current pricelist, US$ 10,000 / socket. If you do the math, you will realize that WebLogic SE can actually be significantly more cost effective than OGS, and a customer can save money if running on a CPU with 4 cores or more for example. Quote from the price list: “When licensing Oracle programs with Standard Edition One or Standard Edition in the product name (with the exception of Java SE Support, Java SE Advanced, and Java SE Suite), a processor is counted equivalent to an occupied socket; however, in the case of multi-chip modules, each chip in the multi-chip module is counted as one occupied socket.” For more details speak to your Oracle sales representative - this is clearly at list price and every customer typically has a relationship with Oracle (like they do with other vendors) and different contractual details may apply. And although OGS has always been production-ready for Java EE applications, it is no secret that WebLogic has always been more enterprise, mission critical application server than OGS since BEA. Different editions of WLS provide features and upgrade irons like the WebLogic Diagnostic Framework, Work Managers, Side by Side Deployment, ADF and TopLink bundled license, Web Tier (Oracle HTTP Server) bundled licensed, Fusion Middleware stack support, Oracle DB integration features, Oracle RAC features (such as GridLink), Coherence Management capabilities, Advanced HA (Whole Service Migration and Server Migration), Java Mission Control, Flight Recorder, Oracle JDK support, etc. Fact #4 - There’s no major vendor supporting community builds of Java EE app servers There are no major vendors providing support for community builds of any Open Source application server. For example, IBM used to provide community support for builds of Apache Geronimo, not anymore. Red Hat does not commercially support builds of WildFly and if I remember correctly, never supported community builds of former JBoss AS. Oracle has never commercially supported GlassFish Server Open Source Edition builds. Tomitribe appears to be the exception to the rule, offering commercial support for Apache TomEE. Fact #5 - WebLogic and GlassFish share several Java EE implementations It has been no secret that although GlassFish and WebLogic share some JSR implementations (as stated in the The Aquarium announcement: JPA, JSF, WebSockets, CDI, Bean Validation, JAX-WS, JAXB, and WS-AT) and WebLogic understands GlassFish deployment descriptors, they are not from the same codebase. Fact #6 - WebLogic is not for GlassFish what JBoss EAP is for WildFly WebLogic is closed-source offering. It is commercialized through a license-based plus support fee model. OGS although from an Open Source code, has had the same commercial model as WebLogic. Still, one cannot compare GlassFish/WebLogic to WildFly/JBoss EAP. It is simply not the same case, since Oracle has had two different products from different codebases. The comparison should be limited to GlassFish Open Source / Oracle GlassFish Server versus WildFly / JBoss EAP. Read the complete article here WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: Glassfish,training,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

    Read the article

  • 6 Facts About GlassFish Announcement

    - by Bruno.Borges
    Since Oracle announced the end of commercial support for future Oracle GlassFish Server versions, the Java EE world has started wondering what will happen to GlassFish Server Open Source Edition. Unfortunately, there's a lot of misleading information going around. So let me clarify some things with facts, not FUD. Fact #1 - GlassFish Open Source Edition is not dead GlassFish Server Open Source Edition will remain the reference implementation of Java EE. The current trunk is where an implementation for Java EE 8 will flourish, and this will become the future GlassFish 5.0. Calling "GlassFish is dead" does no good to the Java EE ecosystem. The GlassFish Community will remain strong towards the future of Java EE. Without revenue-focused mind, this might actually help the GlassFish community to shape the next version, and set free from any ties with commercial decisions. Fact #2 - OGS support is not over As I said before, GlassFish Server Open Source Edition will continue. Main change is that there will be no more future commercial releases of Oracle GlassFish Server. New and existing OGS 2.1.x and 3.1.x commercial customers will continue to be supported according to the Oracle Lifetime Support Policy. In parallel, I believe there's no other company in the Java EE business that offers commercial support to more than one build of a Java EE application server. This new direction can actually help customers and partners, simplifying decision through commercial negotiations. Fact #3 - WebLogic is not always more expensive than OGS Oracle GlassFish Server ("OGS") is a build of GlassFish Server Open Source Edition bundled with a set of commercial features called GlassFish Server Control and license bundles such as Java SE Support. OGS has at the moment of this writing the pricelist of U$ 5,000 / processor. One information that some bloggers are mentioning is that WebLogic is more expensive than this. Fact 3.1: it is not necessarily the case. The initial edition of WebLogic is called "Standard Edition" and falls into a policy where some “Standard Edition” products are licensed on a per socket basis. As of current pricelist, US$ 10,000 / socket. If you do the math, you will realize that WebLogic SE can actually be significantly more cost effective than OGS, and a customer can save money if running on a CPU with 4 cores or more for example. Quote from the price list: “When licensing Oracle programs with Standard Edition One or Standard Edition in the product name (with the exception of Java SE Support, Java SE Advanced, and Java SE Suite), a processor is counted equivalent to an occupied socket; however, in the case of multi-chip modules, each chip in the multi-chip module is counted as one occupied socket.” For more details speak to your Oracle sales representative - this is clearly at list price and every customer typically has a relationship with Oracle (like they do with other vendors) and different contractual details may apply. And although OGS has always been production-ready for Java EE applications, it is no secret that WebLogic has always been more enterprise, mission critical application server than OGS since BEA. Different editions of WLS provide features and upgrade irons like the WebLogic Diagnostic Framework, Work Managers, Side by Side Deployment, ADF and TopLink bundled license, Web Tier (Oracle HTTP Server) bundled licensed, Fusion Middleware stack support, Oracle DB integration features, Oracle RAC features (such as GridLink), Coherence Management capabilities, Advanced HA (Whole Service Migration and Server Migration), Java Mission Control, Flight Recorder, Oracle JDK support, etc. Fact #4 - There’s no major vendor supporting community builds of Java EE app servers There are no major vendors providing support for community builds of any Open Source application server. For example, IBM used to provide community support for builds of Apache Geronimo, not anymore. Red Hat does not commercially support builds of WildFly and if I remember correctly, never supported community builds of former JBoss AS. Oracle has never commercially supported GlassFish Server Open Source Edition builds. Tomitribe appears to be the exception to the rule, offering commercial support for Apache TomEE. Fact #5 - WebLogic and GlassFish share several Java EE implementations It has been no secret that although GlassFish and WebLogic share some JSR implementations (as stated in the The Aquarium announcement: JPA, JSF, WebSockets, CDI, Bean Validation, JAX-WS, JAXB, and WS-AT) and WebLogic understands GlassFish deployment descriptors, they are not from the same codebase. Fact #6 - WebLogic is not for GlassFish what JBoss EAP is for WildFly WebLogic is closed-source offering. It is commercialized through a license-based plus support fee model. OGS although from an Open Source code, has had the same commercial model as WebLogic. Still, one cannot compare GlassFish/WebLogic to WildFly/JBoss EAP. It is simply not the same case, since Oracle has had two different products from different codebases. The comparison should be limited to GlassFish Open Source / Oracle GlassFish Server versus WildFly / JBoss EAP. But the message now is much clear: Oracle will commercially support only the proprietary product WebLogic, and invest on GlassFish Server Open Source Edition as the reference implementation for the Java EE platform and future Java EE 8, as a developer-friendly community distribution, and encourages community participation through Adopt a JSR and contributions to GlassFish. In comparison Oracle's decision has pretty much the same goal as to when IBM killed support for Websphere Community Edition; and to when Red Hat decided to change the name of JBoss Community Edition to WildFly, simplifying and clarifying marketing message and leaving the commercial field wide open to JBoss EAP only. Oracle can now, as any other vendor has already been doing, focus on only one commercial offer. Some users are saying they will now move to WildFly, but it is important to note that Red Hat does not offer commercial support for WildFly builds. Although the future JBoss EAP versions will come from the same codebase as WildFly, the builds will definitely not be the same, nor sharing 100% of their functionalities and bug fixes. This means there will be no company running a WildFly build in production with support from Red Hat. This discussion has also raised an important and interesting information: Oracle offers a free for developers OTN License for WebLogic. For other environments this is different, but please note this is the same policy Red Hat applies to JBoss EAP, as stated in their download page and terms. Oracle had the same policy for OGS. TL;DR; GlassFish Server Open Source Edition isn’t dead. Current and new OGS 2.x/3.x customers will continue to have support (respecting LSP). WebLogic is not necessarily more expensive than OGS. Oracle will focus on one commercially supported Java EE application server, like other vendors also limit themselves to support one build/product only. Community builds are hardly supported. Commercially supported builds of Open Source products are not exactly from the same codebase as community builds. What's next for GlassFish and the Java EE community? There are conversations in place to tackle some of the community desires, most of them stated by Markus Eisele in his blog post. We will keep you posted.

    Read the article

  • Freeradius authentication failed for unknown reason

    - by Moein7tl
    I followed this instruction to force freeradius to use mysql database. and run freeradius in debug mod. but it rejects all authentication. mysql database : mysql select * from radcheck; +----+----------+-----------+----+---------+ | id | username | attribute | op | value | +----+----------+-----------+----+---------+ | 1 | test | Password | == | test123 | | 2 | test | Auth-Type | == | Local | +----+----------+-----------+----+---------+ 2 rows in set (0.02 sec) radtest command : # radtest test test123 localhost 0 testing123 Sending Access-Request of id 235 to 127.0.0.1 port 1812 User-Name = "test" User-Password = "test123" NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Message-Authenticator = 0x00000000000000000000000000000000 rad_recv: Access-Reject packet from host 127.0.0.1 port 1812, id=235, length=20 radiusd debug mod log: rad_recv: Access-Request packet from host 127.0.0.1 port 51034, id=235, length=74 User-Name = "test" User-Password = "test123" NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Message-Authenticator = 0xbf111cbbae24fb0f0a558bfa26f53476 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "test", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop ERROR: No authenticate method (Auth-Type) found for the request: Rejecting the user Failed to authenticate the user. Using Post-Auth-Type Reject # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} - test attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 20 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 20 Sending Access-Reject of id 235 to 127.0.0.1 port 51034 Waking up in 4.9 seconds. Cleaning up request 20 ID 235 with timestamp +4325 Ready to process requests. where is the problem and how should I solve it?

    Read the article

  • L2TP with PEAP authentication from MacOS/iOS

    - by Jose
    Following the recent security advisory, I'm reconfiguring our VPN servers and having trouble. We're using Windows 2008 R2 server for VPN services, running RRAS and NPS on the same server and configure it to use PEAP-EAP-MSCHAPV2 authentiation for all tunnel type(PPTP, L2TP, IKEv2, SSTP), which previously allowed plain MSCHAPv2. But Apple products, MacOS and iOS cannot connect to VPN after this change. I tried to install root certificate used in PEAP transaction but no change. Does anyone know whether MacOS/iOS supports PEAP-EAP-MSCHAPv2 authentication in PPTP/L2TP? If so any tips to make it work? (I know PEAP-EAP-MSCHAPv2 is supported in WPA/WPA2 enterprise) Regards.

    Read the article

  • Setting up RADIUS + LDAP for WPA2 on Ubuntu

    - by Morten Siebuhr
    I'm setting up a wireless network for ~150 users. In short, I'm looking for a guide to set RADIUS server to authenticate WPA2 against a LDAP. On Ubuntu. I got a working LDAP, but as it is not in production use, it can very easily be adapted to whatever changes this project may require. I've been looking at FreeRADIUS, but any RADIUS server will do. We got a separate physical network just for WiFi, so not too many worries about security on that front. Our AP's are HP's low end enterprise stuff - they seem to support whatever you can think of. All Ubuntu Server, baby! And the bad news: I now somebody less knowledgeable than me will eventually take over administration, so the setup has to be as "trivial" as possible. So far, our setup is based only on software from the Ubuntu repositories, with exception of our LDAP administration web application and a few small special scripts. So no "fetch package X, untar, ./configure"-things if avoidable. UPDATE 2009-08-18: While I found several useful resources, there is one serious obstacle: Ignoring EAP-Type/tls because we do not have OpenSSL support. Ignoring EAP-Type/ttls because we do not have OpenSSL support. Ignoring EAP-Type/peap because we do not have OpenSSL support. Basically the Ubuntu version of FreeRADIUS does not support SSL (bug 183840), which makes all the secure EAP-types useless. Bummer. But some useful documentation for anybody interested: http://vuksan.com/linux/dot1x/802-1x-LDAP.html http://tldp.org/HOWTO/html_single/8021X-HOWTO/#confradius UPDATE 2009-08-19: I ended up compiling my own FreeRADIUS package yesterday evening - there's a really good recipe at http://www.linuxinsight.com/building-debian-freeradius-package-with-eap-tls-ttls-peap-support.html (See the comments to the post for updated instructions). I got a certificate from http://CACert.org (you should probably get a "real" cert if possible) Then I followed the instructions at http://vuksan.com/linux/dot1x/802-1x-LDAP.html. This links to http://tldp.org/HOWTO/html_single/8021X-HOWTO/, which is a very worthwhile read if you want to know how WiFi security works. UPDATE 2009-08-27: After following the above guide, I've managed to get FreeRADIUS to talk to LDAP: I've created a test user in LDAP, with the password mr2Yx36M - this gives an LDAP entry roughly of: uid: testuser sambaLMPassword: CF3D6F8A92967E0FE72C57EF50F76A05 sambaNTPassword: DA44187ECA97B7C14A22F29F52BEBD90 userPassword: {SSHA}Z0SwaKO5tuGxgxtceRDjiDGFy6bRL6ja When using radtest, I can connect fine: > radtest testuser "mr2Yx36N" sbhr.dk 0 radius-private-password Sending Access-Request of id 215 to 130.225.235.6 port 1812 User-Name = "msiebuhr" User-Password = "mr2Yx36N" NAS-IP-Address = 127.0.1.1 NAS-Port = 0 rad_recv: Access-Accept packet from host 130.225.235.6 port 1812, id=215, length=20 > But when I try through the AP, it doesn't fly - while it does confirm that it figures out the NT and LM passwords: ... rlm_ldap: sambaNTPassword -> NT-Password == 0x4441343431383745434139374237433134413232463239463532424542443930 rlm_ldap: sambaLMPassword -> LM-Password == 0x4346334436463841393239363745304645373243353745463530463736413035 [ldap] looking for reply items in directory... WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? [ldap] user testuser authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Normalizing NT-Password from hex encoding [pap] Normalizing LM-Password from hex encoding ... It is clear that the NT and LM passwords differ from the above, yet the message [ldap] user testuser authorized to use remote access - and the user is later rejected...

    Read the article

  • Mpd as pppoe server with authorisation by freeradius2

    - by Korjavin Ivan
    I install freeradius2, add to raddb/users: test Cleartext-Password := "test1" Service-Type = Framed-User, Framed-Protocol = PPP, Framed-IP-Address = 10.36.0.2, Framed-IP-Netmask = 255.255.255.0, start radiusd, and check auth: radtest test test1 127.0.0.1 1002 testing123 Sending Access-Request of id 199 to 127.0.0.1 port 1812 User-Name = "test" User-Password = "test1" NAS-IP-Address = 127.0.0.1 NAS-Port = 1002 Message-Authenticator = 0x00000000000000000000000000000000 rad_recv: Access-Accept packet from host 127.0.0.1 port 1812, id=199, length=44 Service-Type = Framed-User Framed-Protocol = PPP Framed-IP-Address = 10.36.0.2 Framed-IP-Netmask = 255.255.255.0 Works fine. Next step. Add to mpd.conf: radius: set auth disable internal set auth max-logins 1 CI set auth enable radius-auth set radius timeout 90 set radius retries 2 set radius server 127.0.0.1 testing123 1812 1813 set radius me 127.0.0.1 create link template L pppoe set link action bundle B set link max-children 1000 set link no multilink set link no shortseq set link no pap chap-md5 chap-msv1 chap-msv2 set link enable chap set pppoe acname Internet load radius create link template em1 L set pppoe iface em1 set link enable incoming And trying to connect, auth failed, here is mpd log: mpd: [em1-2] LCP: auth: peer wants nothing, I want CHAP mpd: [em1-2] CHAP: sending CHALLENGE #1 len: 21 mpd: [em1-2] LCP: LayerUp mpd: [em1-2] CHAP: rec'd RESPONSE #1 len: 58 mpd: [em1-2] Name: "test" mpd: [em1-2] AUTH: Trying RADIUS mpd: [em1-2] RADIUS: Authenticating user 'test' mpd: [em1-2] RADIUS: Rec'd RAD_ACCESS_REJECT for user 'test' mpd: [em1-2] AUTH: RADIUS returned: failed mpd: [em1-2] AUTH: ran out of backends mpd: [em1-2] CHAP: Auth return status: failed mpd: [em1-2] CHAP: Reply message: ^AE=691 R=1 mpd: [em1-2] CHAP: sending FAILURE #1 len: 14 mpd: [em1-2] LCP: authorization failed Then i start freeradius as radiusd -fX, and get this log: rad_recv: Access-Request packet from host 127.0.0.1 port 46400, id=223, length=282 NAS-Identifier = "rubin.svyaz-nt.ru" NAS-IP-Address = 127.0.0.1 Message-Authenticator = 0x14d36639bed8074ec2988118125367ea Acct-Session-Id = "815965-em1-2" NAS-Port = 2 NAS-Port-Type = Ethernet Service-Type = Framed-User Framed-Protocol = PPP Calling-Station-Id = "00e05290b3e3 / 00:e0:52:90:b3:e3 / em1" NAS-Port-Id = "em1" Vendor-12341-Attr-12 = 0x656d312d32 Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Client-Endpoint:0 = "00:e0:52:90:b3:e3" User-Name = "test" MS-CHAP-Challenge = 0xbb1e68d5bbc30f228725a133877de83e MS-CHAP2-Response = 0x010088746ae65b68e435e9d045ad6f9569b60000000000000000b56991b4f20704cb6c68e5982eec5e98a7f4b470c109c1b9 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop [mschap] Found MS-CHAP attributes. Setting 'Auth-Type = mschap' ++[mschap] returns ok [eap] No EAP-Message, not doing EAP ++[eap] returns noop [files] users: Matched entry DEFAULT at line 172 ++[files] returns ok Found Auth-Type = MSCHAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group MS-CHAP {...} [mschap] No Cleartext-Password configured. Cannot create LM-Password. [mschap] No Cleartext-Password configured. Cannot create NT-Password. [mschap] Creating challenge hash with username: test [mschap] Client is using MS-CHAPv2 for test, we need NT-Password [mschap] FAILED: No NT/LM-Password. Cannot perform authentication. [mschap] FAILED: MS-CHAP2-Response is incorrect ++[mschap] returns reject Failed to authenticate the user. Login incorrect: [test] (from client localhost port 2 cli 00e05290b3e3 / 00:e0:52:90:b3:e3 / em1) Using Post-Auth-Type REJECT # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> test attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 2 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 2 Sending Access-Reject of id 223 to 127.0.0.1 port 46400 MS-CHAP-Error = "\001E=691 R=1" Why i have error "[mschap] No Cleartext-Password configured. Cannot create LM-Password." ? I define cleartext-password in users. I check raddb/sites-enabled/default authorize { chap mschap eap { ok = return } files } looks ok for me. Whats wrong with mpd/chap/radius ?

    Read the article

1 2 3 4  | Next Page >