Search Results

Search found 23 results on 1 pages for 'emmys'.

Page 1/1 | 1 

• What command do I need to unzip/extract a .tar.gz file?

  - by EmmyS

  I received a huge .tar.gz file from a client that contains about 800 mb of image files (when uncompressed.) Our hosting company's ftp is seriously slow, so extracting all the files locally and sending them up via ftp isn't practical. I was able to ftp the .tar.gz file to our hosting site, but when I ssh into my directory and try using unzip, it gives me this error: [esthers@clients locations]$ unzip community_images.tar.gz Archive: community_images.tar.gz End-of-central-directory signature not found. Either this file is not a zipfile, or it constitutes one disk of a multi-part archive. In the latter case the central directory and zipfile comment will be found on the last disk(s) of this archive. note: community_images.tar.gz may be a plain executable, not an archive unzip: cannot find zipfile directory in one of community_images.tar.gz or community_images.tar.gz.zip, and cannot find community_images.tar.gz.ZIP, period. What command do I need to use to extract all the files in a .tar.gz file?

  Read the article

• How do I set up FTP on localhost?

  - by EmmyS

  On my old machine (back on Lucid!) I used XAMPP for local dev work. XAMPP installed everything for you, including setting up FTP to your localhost (/var/www) directory, since permissions don't allow you to write directly to it. I have a new machine running Precise, and decided to do things the grown-up way. I installed everything using tasksel, and got apache, php, mysql, and phpmyadmin up and running. But it's kind of a pain to have to create and edit all my files via gksudo gedit on the command line, and sooner or later I'm going to have to upload images. How can I set up FTP so that I can "upload" files to my localhost server?

  Read the article

• Installing PHP extensions on Linux

  - by EmmyS

  Please bear with me; I'm a developer, not a server admin. My company wants to explore using Magento. They've handed me a pre-configured Linux server with apache and PHP installed, but when I try to run the Magento setup, it tells me that there are PHP extensions that need to be loaded. I can edit the php.ini file, but have no idea where to get the extensions or how to install them, and there's no one here who knows, either. Can anyone give me a hand? I need the PDO_MySQL, mcrypt, and GD extensions. I've searched and found sites that talk about downloading from the terminal and compiling code, but it's all way over my head. Is there an easy way to do this?

  Read the article

• AWN displaying window icons even when Display Launchers Only selected

  - by EmmyS

  I'm using AWN with the DockbarX applet.I have Display Launchers Only checked in the awn dock properties, but I'm still getting window icons displaying for certain apps when they're open. Any ideas? Here's a screenshot, note the Firefox icon at the top of the bar (shaded icon) which is part of the DockbarX applet,then note it displaying again at the bottom of the bar (indicating an open window.) You can see from the Launchers list in the dock properties that it isn't in fact a launcher. (The Yahoo and Gmail launchers are standalone Prism apps, they don't use the FF Prism extension. And if I mouse over the bottom FF icon, it does display the title of the open Firefox window, not anything using Prism.) Any ideas?

  Read the article

• Gnome indicator applet not showing same items on two computers

  - by EmmyS

  I have one computer running Lucid and another one that I recently upgraded to Maverick. Up until today, I was using AWN with Maverick, including their custom indicator applets. I've decided to switch back to the default gnome panels with dockbarx, but when I add the indicator applet to my panel, it's not displaying the same items as the applet on my Lucid machine. In particular, the network and Dropbox icons are not displaying. When I look at the About entry for the apps, Lucid shows version 0.3.7, whereas Maverick shows 0.4.6. Did they really remove the network information from the applet in Maverick, or do I need to do something to enable it? My network is very definitely connected, as I still have AWN running and can see the icon there. (A second question, although not particularly important: the applet doesn't inherit the transparency of the panel it's living on - any way to change that?)

  Read the article

• How can I call a URL as a cron job in Webmin?

  - by EmmyS

  (Possibly this belongs on stackoverflow, although it's not really a programming issue since the code works when run directly. If it needs to be moved, though, no problem.) I have a PHP file (which consumers a National Weather Service web service via SOAP, if it matters) that I need to run on a scheduled basis. I'm trying to set up a cron job in Webmin. If I use an absolute path to the file in the Command field, when I run it I get some strange errors: /var/www/html/mysite.com/test/ndfdXMLclient.php: line 1: ?php: No such file or directory /var/www/html/mysite.com/test/ndfdXMLclient.php: line 2: //: is a directory /var/www/html/mysite.com/test/ndfdXMLclient.php: line 3: //DOCUMENTATION: No such file or directory /var/www/html/mysite.com/test/ndfdXMLclient.php: line 4: //: is a directory /var/www/html/mysite.com/test/ndfdXMLclient.php: line 5: syntax error near unexpected token `"running client code",' /var/www/html/mysite.com/test/ndfdXMLclient.php: line 5: `error_log("running client code", 1, "[email protected]");' The actual code in my file for those 5 lines looks like this: <?php // *************************************************************************** //DOCUMENTATION FROM WEATHER.GOV ALL STORED IN xmlClientComments.txt // *************************************************************************** error_log("running client code", 1, "[email protected]"); The code runs perfectly fine when I run it directly in my browser, so why doesn't webmin recognize it as code? (The same thing happens if I enter the actual URL in the command field - http://mysite.com/test/ndfdXMLclient.php.) I've never worked with webmin before; most of our hosts' cron control panels allow cron jobs to run PHP files like this with no issue. Is there some trick to getting webmin to read php as actual php?

  Read the article

• How can I edit my httpd.conf file?

  - by EmmyS

  I have xampp installed, and need to edit my httpd.conf file to add a virtual host block. If I right-click on the file in Nautilus and open with gedit, I can see all the content, but it's read-only. If I try to open it via terminal, like this: esther@estherLinuxSony:~$ sudo gedit opt/lampp/etc/extra/httpd-vhosts.conf It opens the root version of gedit, but there's no content in the file. How can I edit this file?

  Read the article

• Problem installing LibreOffice; please help!

  - by EmmyS

  I followed the instructions for installing LibreOffice found here, which are basically the same instructions found all over askubuntu and the web in general. I followed the instructions (including removing OO first) for gnome; all that is in my Applications menu now is LibreOffice (OO used to have OpenOffice Spreadsheet, OpenOffice Presentation, etc.) When I open LibreOffice, I get the splash screen/menu, but all of the choices for creating new docs are greyed out. It also will not open any office/type files (no errors; they just don't open.) The terminal commands indicated that installation was successful, but obviously something is missing. I'm guessing I can just reinstall OO from the software center, but I'd really like to give LibreOffice a try, given the lack of ongoing development on OO. Can anyone help me out?

  Read the article

• How can I make the date/time applet display on a single line?

  - by EmmyS

  I just updated from Lucid to Natty (thought it was going to be Maverick, but my About Ubuntu menu shows that it is Natty, which "was released in April 2011" - who knew the developers had mastered time travel?!) In any case, the default date/time applet in my gnome panel is now displaying on two lines (date on top of time) instead of one line like it used to. Any way to get it back on one line? I've tried the instructions shown here, but it doesn't seem to make a difference.

  Read the article

• How can I maximum compress video files?

  - by EmmyS

  I received 4 .mov files from a client that they want on their mobile website via SlideShowPro. Each original file was between 200 and 400 mb. I've gotten each one down to about 30 mb using transmageddon as described here, but that's still really big for a mobile connection. Is there any way to shrink them even further? Maybe it's the settings; I used Output Format = MPEG4, Audio = AAC, Video = H264 (which is what is suggested by SlideShowPro.)

  Read the article

• Getting started with SOAP [closed]

  - by EmmyS

  A site I developed has a new requirement to get weather data from the National Weather Service. They have quite a bit of info on how to use SOAP to get their data and display it in the browser, but what we need to do is use a cron job to get the data at specific intervals, then parse the data out into a database. I have no problem writing PHP code that will run an XSLt and parse xml records out into SQL queries, but I have no idea how to handle this with SOAP (which I've never worked with.) Do I get the data via a SOAP request, save it to an XML file on my web server, then run the XSLt against that? Or is there some other way to go about this?

  Read the article

• Installing PHP extensions on Linux

  - by EmmyS

  Please bear with me; I'm a developer, not a server admin. My company wants to explore using Magento. They've handed me a pre-configured Linux server with apache and PHP installed, but when I try to run the Magento setup, it tells me that there are PHP extensions that need to be loaded. I can edit the php.ini file, but have no idea where to get the extensions or how to install them, and there's no one here who knows, either. Can anyone give me a hand? I need the PDO_MySQL, mcrypt, and GD extensions. I've searched and found sites that talk about downloading from the terminal and compiling code, but it's all way over my head. Is there an easy way to do this?

  Read the article

• how can I see a page's referrer in Chrome?

  - by EmmyS

  I've read the "answers" on this question, which is pretty much what I'm asking, but no one actually provides an answer. Nowhere in the Developer Tools (that I can see, anyway) is there a clear indicator of the current page's referring page. This is something that's really easy to find in Firefox; just right-click and choose Page Info. Where is this functionality in Chrome? If it's in the developer tools, which tab is it under? If it's not, is there an extension I can use to get this info? I've tried the Web Developer extension, and can't seem to find this very basic piece of info there, either.

  Read the article

• Can I save a session in Chrome?

  - by EmmyS

  Is there a way to save sessions in Chrome? I'm a longtime Firefox user, and am used to being able to save a session containing multiple tabs so I can go back to it at any time. I'm trying to switch over to Chrome, but without this ability it's not going to happen. I know that I can set the prefs to open the last-opened tabs at startup, but that's not really the same as true session management. I'm perfectly happy to install an extension to do this if one exists. (Not sure if this question belongs here or in superuser...)

  Read the article

• Master does not appear to be a git repository error

  - by EmmyS

  I've inherited a position and instructions for creating a new git repository. Unfortunately I've run into problems and no one here knows what to do. Hoping someone can help me out. Here are the instructions I was left: Create a new repository: For these steps you need to be in the gitosis-admin repository, if you don't have it, in a suitable parent folder do: git clone [email protected]:gitosis-admin.git Edit gitosis.conf file - in gitosis-admin root, under [group base-repo] section, add the name of the new repo to the end of the "writable =" section. Commit change and push back to gitosis-admin master. For the next commands, my_new_project represents the name of your project mkdir my_new_project cd my_new_project git init Copy in any files you want to use to start the repo git commit -a -m "Initializing new repository" git remote add origin [email protected]:my_new_project.git git push master git push master:qa So I did 1 and 2, with no problem. It created a local folder on my machine called gitosis-admin. I edited the gitosis.conf file as indicated. But when I try to do step 3 (which I assume is git push gitosis-admin master) bash tells me that fatal: 'master' does not appear to be a git repository fatal: The remote end hung up unexpectedly What am I doing wrong?

  Read the article

• Clarify git stash for me in switching branches

  - by EmmyS

  I've been working on branch A. My work there is not finished, but I need to switch to branch B for a while. It looks like stash is the command to use. I've found a number of references showing how to use stash to save your changes, but I'm a bit confused. All of the references say something like, when you're ready to go back, just do git stash pop. They don't, however, tell me if I need to switch back to branch A before doing that, though. So, do I manually go back to branch A before running stash pop, or do I stay in branch B, and the actual act of running stash pop will send me back to branch A where I left off with it?

  Read the article

• Best way to display a list of events by month

  - by EmmyS

  I have a mySQL table of events and want to display them in a list using PHP. Pretty simple, except I only want to display the month name once, for example: May 2010 12th, 7 pm. Event 1 - event one description 15th, 5:30 pm. Event 2 - event two description June 2010 9th, 7 pm. Event 1 - event one description 11th, 5:30 pm. Event 2 - event two description I'm very new at SQL and PHP. I can think of one way to do it. It would involve selecting all records grouped by date, then looping through all records, comparing the month/year value each time and the first time the month/year doesn't match, print a new header row to my HTML table. I can't believe it's the best or most efficient way to go. Any ideas for a newbie? I'm sure my way would work, but it's inelegant at best, and processor-intensive at worst.

  Read the article

• php $_FILES error code returning an unexpected error

  - by EmmyS

  I have some code that allows users to upload multiple files at once. It was never getting to a specific point after the upload, so I put in an echo to test for the value of the error code, and it's returning a value that I'm not sure I understand. Here's the code: $tmpTarget = PCBUG_UPLOADPATH; foreach ($_FILES["attachments"]["error"] as $key => $error) { if ($error == UPLOAD_ERR_OK) { $tmp_name = $_FILES["attachments"]["tmp_name"][$key]; $name = str_replace(" ", "_", $_FILES["attachments"]["name"][$key]); move_uploaded_file($tmp_name, "$tmpTarget/$name"); @unlink($_FILES["attachments"]["tmp_name"][$key]); } else { $errorFlag = true; echo "error = $error"; exit; } } The code that creates the attachments field looks like this: for($i=1; $i<=$max_no_img; $i++){ echo "<input type=file name='attachments[]' class='bginput'><br />"; } where $max_no_img is a variable set further up in the code, and PCBUG_UPLOAD path is a constant defined in an included file. Here's what's confusing: after I submit my form, I go and look in my uploads directory, and the files I've selected through the form are there - they uploaded correctly. However, the code is jumping into the else clause and $error is returning 4, which the php manual indicates means that no file was uploaded. Any ideas? The files very clearly are getting where they're supposed to. Is there some other definition of "uploaded" that isn't happening?

  Read the article

• How to get a handle to all JCheckBox objects in order to loop?

  - by EmmyS

  I'm very new to Java and am having some issues looping through JCheckBoxes on a UI. The idea is that I have a bunch of checkboxes (not in a group because more than one can be selected.) When I click a JButton, I want to build a string containing the text from each selected checkbox. The issue I'm having is that our instructor told us that the checkboxes need to be created via a method, which means (see code below) that there isn't a discrete instance name for each checkbox. If there were, I could say something like if(checkBox1.isSelected()) { myString.append(checkBox.getText()); } That would repeat for checkBox2, checkBox3, and so on. But the method provided to us for adding checkboxes to a panel looks like this: public class CheckBoxPanel extends JPanel { private static final long serialVersionUID = 1L; public CheckBoxPanel(String title, String... options) { setBorder(BorderFactory.createTitledBorder(BorderFactory .createEtchedBorder(), title)); setLayout(new BoxLayout(this, BoxLayout.Y_AXIS)); // make one checkbox for each option for (String option : options) { JCheckBox b = new JCheckBox(option); b.setActionCommand(option); add(b); } } } This is called like this: toppingPanel = new CheckBoxPanel("Each Topping $1.50", "Tomato", "Green Pepper", "Black Olives", "Mushrooms", "Extra Cheese", "Pepperoni", "Sausage"); So I now have a panel that contains a border with the title "Each Topping $1.50", and 7 visible checkboxes. What I need to do is get a list of all the selected toppings. We are not supposed to use an ActionListener for each checkbox, but rather get the list when a button is clicked. I'm feeling really clueless here, but I just can't figure out how to get the isSelected property of the checkboxes when the individual checkboxes don't have instance names. Ideally I'd like to somehow add all the checkboxes to an array and loop through the array in the button's action listener to determine which ones are checked, but if I have to check each one individually I will. I just can't figure out how to refer to an individual checkbox when they've been created dynamically.

  Read the article

• Using javascript and php together

  - by EmmyS

  I have a PHP form that needs some very simple validation on submit. I'd rather do the validation client-side, as there's quite a bit of server-side validation that happens to deal with writing form values to a database. So I just want to call a javascript function onsubmit to compare values in two password fields. This is what I've got: function validate(form){ var password = form.password.value; var password2 = form.password2.value; alert("password:"+password+" password2:" + password2); if (password != password2) { alert("not equal"); document.getElementByID("passwordError").style.display="inline"; return false; } alert("equal"); return true; } The idea being that a default-hidden div containing an error message would be displayed if the two passwords don't match. The alerts are just to display the values of password and password2, and then again to indicate whether they match or not (will not be used in production code). I'm using an input type=submit button, and calling the function in the form tag: <form action="<?php echo $_SERVER['PHP_SELF']; ?>" method="post" onsubmit="return validate(this);"> Everything is alerting as expected when entering non-matching values. I would have hoped (and assumed, based on past use) that if the function returned false, the actual submit would not occur. And yet, it is. I'm testing by entering non-matching values in the password fields, and the alerts clearly show me the values and the not equal result, but the actual form action is still occurring and it's trying to write to my database. I'm pretty new at PHP; is there something about it that will not let me combine with javascript this way? Would it be better to use an input type=button and include submit() in the function itself if it returns true?

  Read the article

• How to use JS to jump to a specific place in a page? Tried scrollIntoView, not working

  - by EmmyS

  I have a PHP form for discussions. Each message has its own response button, which is dynamically generated. I'm using javascript in the button to make a response form visible at the bottom of the page, but I can't for the life of me get the page to jump down to the form once it's visible. This is a problem for pages that have a lot of discussions on it, as some users may not know to scroll down and will just think the button didn't work. Here's what I have now for my button code: <a href="#" onClick="changeVisibility(3,'responseForm')"><img src="images/reply.jpg" border=0 /></a> The changeVisibility function looks like this: function changeVisibility(parentID, elementID) { document.getElementById(elementID).style.visibility="visible"; document.forms[0].parent_id.value=parentID; var el = document.getElementById(elementID); el.scrollIntoView(true); } In my form, I have a div whose id is set to responseForm. When clicking the button, the div does become visible, but the scrollIntoView is not working - I have to manually scroll down to see it. Any ideas?

  Read the article

• Newbie - what do I need to do with httpd.conf to make CakePHP work correctly?

  - by EmmyS

  (Not sure if this belongs here or on webmasters; please move if necessary.) I'm a total newbie to Cake and not much better with apache; I've done a lot of PHP but always with a server that's already been set up by someone else. So I'm going through the basic blog tutorial, and it says: A Note On mod_rewrite Occasionally a new user will run in to mod_rewrite issues, so I'll mention them marginally here. If the Cake welcome page looks a little funny (no images or css styles), it probably means mod_rewrite isn't functioning on your system. Here are some tips to help get you up and running: Make sure that an .htaccess override is allowed: in your httpd.conf, you should have a section that defines a section for each Directory on your server. Make sure the AllowOverride is set to All for the correct Directory. Make sure you are editing the system httpd.conf rather than a user- or site-specific httpd.conf. For some reason or another, you might have obtained a copy of CakePHP without the needed .htaccess files. This sometimes happens because some operating systems treat files that start with '.' as hidden, and don't copy them. Make sure your copy of CakePHP is from the downloads section of the site or our SVN repository. Make sure you are loading up mod_rewrite correctly! You should see something like LoadModule rewrite_module libexec/httpd/mod_rewrite.so and AddModule mod_rewrite.c in your httpd.conf." I'm using XAMPP on linux. I've found my httpd.conf file in opt/lampp/ etc, but am not sure what I need to do with it. I've searched for "rewrite", and there's only one line: LoadModule rewrite_module modules/mod_rewrite.so There's nothing about AddModule mod_rewrite.c. Do I just create a Directory section for the directory I've installed Cake in and set AlllowOverride to All? (I created a separate subdirectory of my wwwroot and installed in there, since I also have installs of Joomla and CodeIgniter.) Is there anything else I need to do? My download of Cake did come with two htaccess-type files (._.htaccess and .htaccess) - do I need to do anything with them? Thanks for any help you can provide to this non-server-admin. EDIT TO ADD virtual host sample: <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /www/docs/dummy-host.example.com ServerName dummy-host.example.com ServerAlias www.dummy-host.example.com ErrorLog logs/dummy-host.example.com-error_log CustomLog logs/dummy-host.example.com-access_log common </VirtualHost>

  Read the article

• $_SERVER['HTTP_REFERER'] not working with Header

  - by EmmyS

  I have a site that allows public access to some pages, but requires a login for others. I have a link to the login from all pages, and what I'd like to do after a successful login is send the user back to the page they were on when they clicked the login link. I know the HTTP_REFERER can be spoofed, and sometimes stripped out by certain hosts and proxies, but since it's strictly within my own site, and only a convenience for users, I'm not too worried about it. I am curious about why it isn't working in conjunction with a redirect, though. I've set a visible field to contain the value of the http referer, and it displays correctly. So the page is getting the value of the referrer variable. But when I try this: $home_url = $_SERVER['HTTP_REFERER']; header('Location: ' . $home_url); it doesn't work. This, on the other hand, does: $home_url = 'http://' . $_SERVER['HTTP_HOST'].dirname($_SERVER['PHP_SELF']).'/discussions.php'; header('Location: ' . $home_url); So I know the header location part works. Any idea why it doesn't want to work in conjunction with the http_referer variable? (Also, does it drive anyone else nuts that referer is spelled incorrectly? I keep mistyping it using the OED spelling, silly me...)

  Read the article

1