Search Results

Search found 9 results on 1 pages for 'freakishly'.

Page 1/1 | 1 

• why is drop box syncing so freakishly slowly in my linux virtual machine?

  - by Bec

  i am setting up a linux virtual machine (windows 7 64 bit host, ubuntu 64 bit guest, using virtual box) and i just installed drop box and set it to sync. I've only got about 2Gb in there so i figured it should take just an afternoon, but it's going at about 0.5 kB/second and says it will take about 60 days. I usually get about 200 kB/second in the host OS, and downloading straight from the dropbox website through firefox in the ubuntu VM i get about that, but sync is really slow. any tips?

  Read the article

• DVI splitter not working as expected/confusion between DVI-D and -I

  - by Freakishly

  Hey guys, thanks for looking. I have an ATI FirePro™ V3700 in my desktop machine, and I have been running a dual-monitor setup quite effortlessly, thanks to the two DVI ports on the card. I came upon a third monitor, and wanted to extend my desktop to 3 screens, so I purchased a DVI splitter from Amazon. Now, I can only duplicate the second monitor onto the third, not extend it. I've tried all possible combinations of input to no avail. Here's the setup: The ATI FirePro™ V3700 has two Dual-Link DVI-I outputs The splitter splits a single Dual-Link DVI-I port into two Dual-Link DVI-I outputs Two of the monitors are NEC E222W, and the third monitor is a Dell 2001FP. Each monitor has one D-Sub and one Dual-Link DVI-D input. Cables going from the video card to the monitors are two Dual-Link DVI-D to the NECs and one Single-Link DVI-D to the Dell. Is the problem likely with the DVI-D/DVI-I mismatch? Or is it with the cable on the Dell that is only a Single-Link? The cables are easily replaceable, the monitors not so much. Thanks for your time, I really appreciate it. http://www.amd.com/us/products/workstation/graphics/ati-firepro-3d/v3700/Pages/v3700-specs.aspx http://www.amazon.com/Cables-Unlimited-DVI-D-Splitter-PCM-2260/product-reviews/B000H09RFM/ref=dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1 www dot newegg dot com/Product/Product.aspx?Item=N82E16824002495 accessories dot us dot dell dot com/sna/PopupProductDetail.aspx?cs=19&l=en&c=us&sku=320-1578 Apologies for the fudged links, I'm new here and they won't let me post more than two :P

  Read the article

• Example usage of a custom delegate in c#

  - by Freakishly

  Hi, I found this question on SO about a tree implementation in C#. I have no idea about delegates and I was wondering how the following code could be used to implement a tree. Also, what would be the most efficient way to keep a track of parent nodes? delegate void TreeVisitor<T>(T nodeData); class NTree<T> { T data; LinkedList<NTree<T>> children; public NTree(T data) { this.data = data; children = new LinkedList<NTree<T>>(); } public void addChild(T data) { children.AddFirst(new NTree<T>(data)); } public NTree<T> getChild(int i) { foreach (NTree<T> n in children) if (--i == 0) return n; return null; } public void traverse(NTree<T> node, TreeVisitor<T> visitor) { visitor(node.data); foreach (NTree<T> kid in node.children) traverse(kid, visitor); } }

  Read the article

• How do I implement a group of strings that starts randomly, but is bound by relevance upon selection?

  - by Freakishly

  Okay the title may be a little confusing, but here's what I'm trying to do :) I have a game in XNA where every tap from the user draws a moving circle on the screen. The circle has a tag, say 'dogs' displayed on it. So imagine multiple taps on the screen, and we have all these circles of various colors and sizes moving around the screen with different (but constant) velocities. Each circle with different tags: 'dogs', 'cats' and so on... Clicking on empty space generates a new circle at that point. Clicking on one of the circles "selects" it, turning it into a greeen shade and slowing its velocity down to a fraction of what it was. Clicking on it again "unselects" it, and restores its original color and velocity (trajectory does not change). With each circle comes a tag, and as of now I'm populating these tags randomly from a string array (which means there's a chance tags will repeat). I would like the tags for newly created circles to be relevant to previous "selected" tags. So when I click on 'dogs', I would like 'German Shepherd' but I would also like 'dog parks' and 'lemurs' assuming dogs get along well with lemurs. What would be the best way to approach this problem. In my head I have a massive many-to-many mapping, but I can't seem to translate it to code. Thanks for looking. FYI I'm using the sample project from here: http://mobile.tutsplus.com/tutorials/windows/introduction-to-xna-on-windows-phone-7/

  Read the article

• Are nvidia drivers necessary?

  - by Shubham Chaudhary

  The new Ubuntu 14.04 comes with nvidia driver options. My system(Dell XPS) uses nvidia-331. For starters it messed up my text font size. It is so freakishly small with nvidia drivers on. So my question is: Are these drivers really necessary? What performance gain do they provide? Will it help me save some battery life? Basically what are these drivers doing that I was missing before (with nouveau I guess)?

  Read the article

• How to prevent any files from being copied onto the Desktop?

  - by Kaushik Gopal

  Gentlepeeps, Is there any solution to prevent copying of files onto the desktop? My folks and i currently have one super-common-comp in our place. And when all of the laptops are busy, we tend to do some quick surfing on this comp. I prefer to keep things freakishly organized in this comp and one thing i hate is having those off-shoot irritating forwarded downloads on my desktop. Is there some way to restrict files from being copied onto the desktop? I tried making the administrator user's desktop folder as read-only :P . That doesn't solve the problem. Any other ideas/software/solutions? cheers.

  Read the article

• Are SANs unreliable?

  - by chaos

  So at the place where I wear one of my various hats, this one representing a development rather than admin role, there's been an initiative to move to SANs. So far, I have been spectacularly unimpressed. First it was this behavior where, when MySQL databases are on the SAN, the first few tables that anything tries to hit after the system boots come up as nonexistent and MySQL has to be restarted before it realizes they're actually there. Then today, on multiple systems (including the primary SVN repository, ever-so-wonderfully) we get SAN mounts spewing IO errors and the filesystems going into read-only, which is the kind of behavior I expect from directly mounted naked disks, not fault-tolerant managed storage. Right now, I'm at the point where if I were putting together a project and somebody said "hey we should use SANs", my response would be "GTFO". So basically I want to know whether my experience is typical or even common, or whether I'm having some kind of freakishly bad luck with SANs. The systems these SANs are attached to are all CentOS machines, if that's relevant.

  Read the article

• Windows XP SP3 - Library not registered error... IE8 not installing.

  - by Wesley

  Specs to put things in context: AMD Athlon XP 2400+ @ 1987 MHz / 2 x 512MB PC3200 DDR RAM / WD 160GB IDE HDD / 3DFuzion 128MB GeForce 6200 AGP 4x / FIC AM37 / Windows XP SP3 Just recently, I was unable to start Windows Media Player. I clicked it and the busy cursor came up, but then nothing happened. Also, I tried doing a search for a file, and same thing. It would show busy cursor then suddenly stop doing anything. I couldn't find it in the Processes of the Task Manager. (Perhaps I don't know what I'm looking for?) Also, I was trying to update my DirectX, which has been running something older than DX9 9.0c for a while now, except the installation fails due to "internal error". I think the failed DirectX installation has been like that for a while... (I remember trying to install DX9 9.0c a while back, but still failed.) The Windows programs not starting, I don't think I've ever had before... what could be the cause of these problems?! Thanks in advance. =) EDIT1: Weird thing now is that when I try to open User Accounts, I get a message saying "Wrong number of arguments or invalid property assignment." Also, when I'm trying to open services.msc, I'm getting a script error that says that "Library not registered." (Code: 0, URL: res://C:\WINDOWS\System32\mmcndmgr.dll/views.htm) Perhaps this is related to my other question, where I seemed to have an unregistered library of some sort. EDIT2: The DirectX End-User Runtime Web Installer freakishly worked and updated successfully. Now, I have focussed the question on the bigger problem. For WMP11, H&S, and Search, I click it once, get a busy icon for a second, and then nothing happens. Refer to EDIT1 for other problems. EDIT3: Seems that my problems may be related to some Internet Explorer Script Errors. So what I did was download the IE8 installer from the Microsoft website, but when I run it and get to the main portion of the installer, it just keeps looping on the Downloading step of the installation. The installer is still running, but I left it for at least 4 hours and the downloading step was still not finished. What is the problem? Also, I uninstalled Ubuntu 9.10 after these problems, but they still remain. EDIT4: I'm getting an active desktop recovery background on startup now. And within seconds my computer hangs again. EDIT3 explains main issue though.

  Read the article

• slow DNS resolution

  - by Ehsan

  I have a DNS server that resolves all queries for an internal group of servers. It is a bind on CentOS 5.5 (same as RHEL5) and I have set it up to allow recursion and resolve direction without any forwarders. The problem I am facing is that it takes a freakishly long amount of time to resolve a name for the first time. (in the magnitudes of 20 sec) This causes clients to give timeout. When I set it to forward all to Google's public DNS, i.e. 8.8.8.8+8.8.4.4, it works very nicely (within a second). I tried monitoring the traffic on the net to see why it is doing this: [root@ns1 ~]# tcpdump -nnvvvA -s0 udp tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes 23:06:36.137797 IP (tos 0x0, ttl 64, id 35903, offset 0, flags [none], proto: UDP (17), length: 60) 172.17.1.10.36942 > 172.17.1.4.53: [udp sum ok] 19773+ A? www.paypal.com. (32) E..<[email protected]... .....N.5.(6.M=...........www.paypal.com..... 23:06:36.140594 IP (tos 0x0, ttl 64, id 56477, offset 0, flags [none], proto: UDP (17), length: 71) 172.17.1.4.6128 > 192.35.51.30.53: [udp sum ok] 10105 [1au] A? www.paypal.com. ar: . OPT UDPsize=4096 (43) E..G....@........#3....5.3fR'y...........www.paypal.com.......)........ 23:06:38.149756 IP (tos 0x0, ttl 64, id 13078, offset 0, flags [none], proto: UDP (17), length: 71) 172.17.1.4.52425 > 192.54.112.30.53: [udp sum ok] 54892 [1au] A? www.paypal.com. ar: . OPT UDPsize=4096 (43) [email protected]&.....6p....5.3.q.l...........www.paypal.com.......)........ 23:06:40.159725 IP (tos 0x0, ttl 64, id 43016, offset 0, flags [none], proto: UDP (17), length: 71) 172.17.1.4.24059 > 192.42.93.30.53: [udp sum ok] 11205 [1au] A? www.paypal.com. ar: . OPT UDPsize=4096 (43) E..G....@..@.....*].]..5.3..+............www.paypal.com.......)........ 23:06:41.141403 IP (tos 0x0, ttl 64, id 35904, offset 0, flags [none], proto: UDP (17), length: 60) 172.17.1.10.36942 > 172.17.1.4.53: [udp sum ok] 19773+ A? www.paypal.com. (32) E..<.@..@..@... .....N.5.(6.M=...........www.paypal.com..... 23:06:42.169652 IP (tos 0x0, ttl 64, id 44001, offset 0, flags [none], proto: UDP (17), length: 60) 172.17.1.4.9141 > 192.55.83.30.53: [udp sum ok] 1184 A? www.paypal.com. (32) E..<[email protected].#..5.(...............www.paypal.com..... 23:06:42.207295 IP (tos 0x0, ttl 54, id 38004, offset 0, flags [none], proto: UDP (17), length: 205) 192.55.83.30.53 > 172.17.1.4.9141: [udp sum ok] 1184- q: A? www.paypal.com. 0/3/3 ns: paypal.com. NS ns1.isc-sns.net., paypal.com. NS ns2.isc-sns.com., paypal.com. NS ns3.isc-sns.info. ar: ns1.isc-sns.net. AAAA 2001:470:1a::1, ns1.isc-sns.net. A 72.52.71.1, ns2.isc-sns.com. A 38.103.2.1 (177) E....t..6./A.7S......5#..................www.paypal.com..................ns1.isc-sns.net..............ns2.isc-sns...............ns3.isc-sns.info..,.......... ..p.............,..........H4G..I..........&g.. (this goes on for a few more seconds) If you look carefully, you will see that the first 3-4 root servers did not respond at all. This wastes 7-8 seconds, until one of them responded. Do you think I have setup something wrong here? Interestingly, when I dig directly from the root servers that did not respond, the always respond very fast (showing the firewall/nat is not the issue here). E.g. dig www.paypal.com @192.35.51.30 works perfectly, consistently, and very fast. What do you think about this mystery?

  Read the article

1