Search Results

Search found 80 results on 4 pages for 'graeme'.

Page 1/4 | 1 2 3 4  | Next Page >

  • Exchange 2010 POP3/IMAP4/Transport services complaining that they can't find SSL certificate after blue screen

    - by Graeme Donaldson
    We have a single-server Exchange 2010 setup. In the early hours of this morning the server had a blue screen and rebooted. After coming back up the POP3/IMAP4 and Transport services are complaining that they cannot find the correct SSL certificate for mail.example.com. POP3: Log Name: Application Source: MSExchangePOP3 Date: 2012/04/23 11:45:15 AM Event ID: 2007 Task Category: (1) Level: Error Keywords: Classic User: N/A Computer: exch01.domain.local Description: A certificate for the host name "mail.example.com" couldn't be found. SSL or TLS encryption can't be made to the POP3 service. IMAP4: Log Name: Application Source: MSExchangeIMAP4 Date: 2012/04/23 08:30:44 AM Event ID: 2007 Task Category: (1) Level: Error Keywords: Classic User: N/A Computer: exch01.domain.local Description: A certificate for the host name "mail.example.com" couldn't be found. Neither SSL or TLS encryption can be made to the IMAP service. Transport: Log Name: Application Source: MSExchangeTransport Date: 2012/04/23 08:32:27 AM Event ID: 12014 Task Category: TransportService Level: Error Keywords: Classic User: N/A Computer: exch01.domain.local Description: Microsoft Exchange could not find a certificate that contains the domain name mail.example.com in the personal store on the local computer. Therefore, it is unable to support the STARTTLS SMTP verb for the connector Default EXCH01 with a FQDN parameter of mail.example.com. If the connector's FQDN is not specified, the computer's FQDN is used. Verify the connector configuration and the installed certificates to make sure that there is a certificate with a domain name for that FQDN. If this certificate exists, run Enable-ExchangeCertificate -Services SMTP to make sure that the Microsoft Exchange Transport service has access to the certificate key. The odd part is that Get-ExchangeCertificate show the cert as enabled for all the relevant services, and OWA is working flawlessly using this certificate. [PS] C:\Users\graeme\Desktop>Get-ExchangeCertificate Thumbprint Services Subject ---------- -------- ------- XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX ....S. CN=exch01 YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY ....S. CN=exch01 ZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ IP.WS. CN=mail.example.com, OU=Domain Control Validated, O=mail.exa... Here's the certificate in the computer account's personal cert store: Does anyone have any pointers for getting POP3/IMAP4/SMTP to use the cert again?

    Read the article

  • First web server questions

    - by Graeme
    Hi there, Just looking for some help/suggestions with this. I require my own server for an upcoming project that will be hosting users websites. I want to build a control panel the user can log into and modify their website which will be stored elsewhere on the server. This all seems easy enough, It's just managing domains and emails that confuse me. What should I look for to manage domain names and point them to the correct website and also what would be the best way to manage email accounts/set up new ones etc. I want to avoid cPanel/WHM if possible, I'm looking to control most things through the control panel I will be building. So any suggestions on this would be useful as well, as I will be wanting to add email accounts through php (Can be done using a shell I assume?). I will also be wanting to measure bandwidth used on the websites contained in each users directory, any suggestions on making this possible? I'm really looking for some suggestions on what software to use to set this up, any advice would be really helpful! Thanks, Graeme

    Read the article

  • Dynamically add files to visual studio deployment project.

    - by Graeme Yeo
    I've been desperately looking for the answer to this and I feel I'm missing something obvious. I need to copy a folder full of data files into the TARGETDIR of my deployment project at compile time. I can see how I would add individual files (ie. right click in File System and go to Add-File) but I have a folder full of data files which constantly get added to. I'd prefer not to have to add the new files each time I compile. I have tried using a PreBuildEvent to copy the files: copy $(ProjectDir)..\Data*.* $(TargetDir)Data\ which fails with error code 1 when I build. I can't help but feel I'm missing the point here though. Any suggestions? Thanks in advance. Graeme

    Read the article

  • Ubuntu 10.04 & IBM DS3524 with FC multipath, inactive path is [failed][faulty] instead of [active][ghost]

    - by Graeme Donaldson
    OK, this is my setup: FC Switches IBM/Brocade, Switch1 and Switch2, independent fabrics. Server IBM x3650 M2, 2x QLogic QLE2460, 1 connected to each FC Switch. Storage IBM DS3524, 2x controllers with 4x FC ports each, but only 2x connected on each. +-----------------------------------------------------------------------+ | HBA1 Server HBA2 | +-----------------------------------------------------------------------+ | | | | | | +-----------------------------+ +------------------------------+ | Switch1 | | Switch2 | +-----------------------------+ +------------------------------+ | | | | | | | | | | | | | | | | | | | | +-----------------------------------+-----------------------------------+ | Contr A, port 3 | Contr A, port 4 | Contr B, port 3 | Contr B, port 4 | +-----------------------------------+-----------------------------------+ | Storage | +-----------------------------------------------------------------------+ My /etc/multipath.conf is from the IBM redbook for the DS3500, except I use a different setting for prio_callout, IBM uses /sbin/mpath_prio_tpc, but according to http://changelogs.ubuntu.com/changelogs/pool/main/m/multipath-tools/multipath-tools_0.4.8-7ubuntu2/changelog, this was renamed to /sbin/mpath_prio_rdac, which I'm using. devices { device { #ds3500 vendor "IBM" product "1746 FAStT" hardware_handler "1 rdac" path_checker rdac failback 0 path_grouping_policy multibus prio_callout "/sbin/mpath_prio_rdac /dev/%n" } } multipaths { multipath { wwid xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx alias array07 path_grouping_policy multibus path_checker readsector0 path_selector "round-robin 0" failback "5" rr_weight priorities no_path_retry "5" } } The output of multipath -ll with controller A as the preferred path: root@db06:~# multipath -ll sdg: checker msg is "directio checker reports path is down" sdh: checker msg is "directio checker reports path is down" array07 (xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx) dm-2 IBM ,1746 FASt [size=4.9T][features=1 queue_if_no_path][hwhandler=0] \_ round-robin 0 [prio=2][active] \_ 5:0:1:0 sdd 8:48 [active][ready] \_ 5:0:2:0 sde 8:64 [active][ready] \_ 6:0:1:0 sdg 8:96 [failed][faulty] \_ 6:0:2:0 sdh 8:112 [failed][faulty] If I change the preferred path using IBM DS Storage Manager to Controller B, the output swaps accordingly: root@db06:~# multipath -ll sdd: checker msg is "directio checker reports path is down" sde: checker msg is "directio checker reports path is down" array07 (xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx) dm-2 IBM ,1746 FASt [size=4.9T][features=1 queue_if_no_path][hwhandler=0] \_ round-robin 0 [prio=2][active] \_ 5:0:1:0 sdd 8:48 [failed][faulty] \_ 5:0:2:0 sde 8:64 [failed][faulty] \_ 6:0:1:0 sdg 8:96 [active][ready] \_ 6:0:2:0 sdh 8:112 [active][ready] According to IBM, the inactive path should be "[active][ghost]", not "[failed][faulty]". Despite this, I don't seem to have any I/O issues, but my syslog is being spammed with this every 5 seconds: Jun 1 15:30:09 db06 multipathd: sdg: directio checker reports path is down Jun 1 15:30:09 db06 kernel: [ 2350.282065] sd 6:0:2:0: [sdh] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jun 1 15:30:09 db06 kernel: [ 2350.282071] sd 6:0:2:0: [sdh] Sense Key : Illegal Request [current] Jun 1 15:30:09 db06 kernel: [ 2350.282076] sd 6:0:2:0: [sdh] <<vendor>> ASC=0x94 ASCQ=0x1ASC=0x94 ASCQ=0x1 Jun 1 15:30:09 db06 kernel: [ 2350.282083] sd 6:0:2:0: [sdh] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 Jun 1 15:30:09 db06 kernel: [ 2350.282092] end_request: I/O error, dev sdh, sector 0 Jun 1 15:30:10 db06 multipathd: sdh: directio checker reports path is down Jun 1 15:30:14 db06 kernel: [ 2355.312270] sd 6:0:1:0: [sdg] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jun 1 15:30:14 db06 kernel: [ 2355.312277] sd 6:0:1:0: [sdg] Sense Key : Illegal Request [current] Jun 1 15:30:14 db06 kernel: [ 2355.312282] sd 6:0:1:0: [sdg] <<vendor>> ASC=0x94 ASCQ=0x1ASC=0x94 ASCQ=0x1 Jun 1 15:30:14 db06 kernel: [ 2355.312290] sd 6:0:1:0: [sdg] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 Jun 1 15:30:14 db06 kernel: [ 2355.312299] end_request: I/O error, dev sdg, sector 0 Does anyone know how I can get the inactive path to show "[active][ghost]" instead of "[failed][faulty]"? I assume that once I can get that right then the spam in my syslog will end as well. One final thing worth mentioning is that the IBM redbook doc targets SLES 11 so I'm assuming there's something a little different under Ubuntu that I just haven't figured out yet. Update: As suggested by Mitch, I've tried removing /etc/multipath.conf, and now the output of multipath -ll looks like this: root@db06:~# multipath -ll sdg: checker msg is "directio checker reports path is down" sdh: checker msg is "directio checker reports path is down" xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxdm-1 IBM ,1746 FASt [size=4.9T][features=0][hwhandler=0] \_ round-robin 0 [prio=1][active] \_ 5:0:2:0 sde 8:64 [active][ready] \_ round-robin 0 [prio=1][enabled] \_ 5:0:1:0 sdd 8:48 [active][ready] \_ round-robin 0 [prio=0][enabled] \_ 6:0:1:0 sdg 8:96 [failed][faulty] \_ round-robin 0 [prio=0][enabled] \_ 6:0:2:0 sdh 8:112 [failed][faulty] So its more or less the same, with the same message in the syslog every 5 minutes as before, but the grouping has changed.

    Read the article

  • What Linux platform is Ubuntu Server

    - by Graeme
    I'm just trying to get an old HP ML150 up and running to learn on. I've installed ubuntu server on it and have found the drivers are all not installed. HP has drivers but I have no clue what platform to download.This is what I have to choose from. » Novell NetWare 6.5 » Red Hat Enterprise Linux 4 (AMD64/EM64T) » Red Hat Enterprise Linux 4 (x86) » Red Hat Enterprise Linux 5 Server (x86) » Red Hat Enterprise Linux 5 Server (x86-64) » SCO OpenServer 5 » SCO OpenServer 6 » SCO UnixWare 7 » SUSE Linux Enterprise Server 10 (AMD64/EM64T) » SUSE Linux Enterprise Server 10 (x86) » SUSE Linux Enterprise Server 9 (AMD64/EM64T) » SUSE Linux Enterprise Server 9 (x86) Any suggestions? Thank you in advance guys for your help.

    Read the article

  • Dual boot - 12.04 installed first

    - by graeme
    I have found many guides with how to install windows and ubuntu in dual boot mode, but none from the perspective of a Ubuntu user. Unfortunately Wine or OpenOffice do not display a document that I am working on properly so I am forced to getting windows back temporarily. Can anyone give me some guidance on how to go about this, sorry but step by step instructions are needed as I am still fairly new to Linux

    Read the article

  • ESXi 4.1 host not recognising existing VMFS datastore

    - by Graeme Donaldson
    Existing setup: host1 and host2, ESX 4.0, 2 HBAs each. lun1 and lun2, 2 LUNs belonging to the same RAID set (my terminology might be sketchy here). This has been working just fine all along. I added host3, ESXi 4.1, 2 HBAs. If I view Configuration / Storage Adapters, I can see that both HBAs see both LUNs, but if I view Configuration / Storage, I only see 1 datastore. host1/2 can see both LUNs and I have VMs running on both too. I have rescanned, refreshed and even rebooted, but host3 refuses to acknowledge 1 of the datastores. Does anyone know what's going on? Update: I re-installed the host with ESX (not i) 4.0, same version as the existing hosts and it's still not recognising the vmfs. I think I'm going to SVmotion everything off that datastore then format it. Update2: I've created the LUN from scratch and the problem gets even weirder. I've presented the LUN to all 3 hosts, and I can see the LUN in the vSphere client's Configuration / Storage Adapters section on all 3 hosts. If I create a datastore on the LUN via the Configuration / Storage section on host1, it works fine and I can create an empty folder via datastore browser, but the datastore is not seen by the host2 and host3. I can use the Add Storage wizard on host2 and it will see the LUN. At this point the "VMFS Label" column has the label I gave with "(head)" appended. If I try the Add Storage wizard's "Keep the existing signature" option, it fails with an error "Cannot change the host configuration." and a dialog box that says 'Call "HostStorageSystem.ResolveMultipleUnresolvedVmfsVolumes" for object "storageSystem-17" on vCenter Server "vcenter.company.local" failed.' If I try the Add Storage wizard's "Assign a new signature" option on host2, it will complete and the VMFS label will have "snap-(hexnumber)-" prepended. At this point its also visible on host3, but not host1. I have a similar setup in a different datacenter which didn't give me all this trouble.

    Read the article

  • Using %v in Apache LogFormat definition matches ServerName instead of specific vhost requested

    - by Graeme Donaldson
    We have an application which uses a DNS wildcard, i.e. *.app.example.com. We're using Apache 2.2 on Ubuntu Hardy. The relevant parts of the Apache config are as follows. In /etc/apache2/httpd.conf: LogFormat "%v %h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" vlog In /etc/apache2/sites-enabled/app.example.com: ServerName app.example.com ServerAlias *.app.example.com ... CustomLog "|/usr/sbin/vlogger -s access.log /var/log/apache2/vlogger" vlog Clients access this application using their own URL, e.g. company1.app.example.com, company2.app.example.com, etc. Previously, the %v in the LogFormat directive would match the hostname of the client request, and we'd get several subdirectories under /var/log/apache2/vlogger corresponding to the various client URLs in use. Now, %v appears to be matching the ServerName value, so we only get one log under /var/log/apache2/vlogger/app.example.com. This breaks our logfile analysis because the log file has no indication of which client the log relates to. I can fix this easily by changing the LogFormat to this: LogFormat "%{Host}i %h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" vlog This will use the HTTP Host: header to tell vlogger which subdirectory to create the logs in and everything will be fine. The only concern I have is that this has worked in the past and I can't find any indication that this has changed recently. Is anyone else using a similar config, i.e. wildcard + vlogger and using %v? Is it working fine?

    Read the article

  • Mapping printers using Group Policy Preferences; works on Windows XP, not on Windows 7 x64

    - by Graeme Donaldson
    I'm trying to use Group Policy Preferences to manage user connections to shared printers. The print server is Windows Server 2003 R2 Std edition. Several printers are installed, and I've added x64 editions of all the drivers to the print server as well. I've created a new GPO containing the printer preference settings. Printer mappings are targeted based on AD security group membership. I log on to a Windows XP PC with the Group Policy CSEs installed and the printer maps perfectly. I log on to a Windows 7 x64 PC and it doesn't map. If I manually connect to the shared printer, I get a prompt which asks me to confirm if I trust the server before installing the driver, and then it works perfectly. I have domain admin rights and my UAC settings have not been changed from the default, i.e. UAC is enabled and the default level is selected. Is the printer mapping failing because it's unable to prompt me to install the driver, or is there something else afoot?

    Read the article

  • Disabled FRS replication on a DFS link, but the targets still list the replica set in their FRS conf

    - by Graeme Donaldson
    It's been a while since I've had to deal with the wonders of FRS, so I'm doing some testing to refresh my memory. This is what I've done so far. I am stuck with FRS rather than DFS-R for the moment since not all of my link targets are running R2. Created a domain-based DFS root, hosted on 4 servers. Created a DFS link under the root, targeted at 2 servers. The shares on both servers were empty. Dropped about 500MB of data into the target folder on one server and waited for replication to complete. Added/removed/modified files on both targets and confirmed that changes are replicated within a few seconds. Deleted the contents of the target folder on 1 server and waited for the other server to replicate the deletion. All of this worked perfectly, so now I want to remove my DFS link since I only created it for testing purposes. This is where it gets weird. I'm pretty sure that in the past I've disabled replication on the DFS link and after a short amount of time each target would log an info event in the FRS event log, something along the lines of "this server is no longer a member of replica set X". I have waited about 3 hours and I haven't seen this happen. ntfrsutl ds tells me that the server is not a member of any set, which is expected because when I disable replication on the link, the AD attributes on the computer object are removed. The weird part is... ntfrsutl sets still shows me the replica set, with all the properties, etc. So it seems like the FRS-related attributes of the target server's AD object are gone, but the FRS service for some reason hasn't removed the replica set. Can anyone see what I have done wrong?

    Read the article

  • Authenticating Linux users against AD without Likewise Open

    - by Graeme Donaldson
    Has anyone got their Linux systems authenticating against Active Directory without using Likewise Open? We are close to implementing Likewise Open, but first we need to rename roughly 70 of 110 Linux servers so that their hostnames are not longer than 15 characters. This is required because Likewise Open actually joins the Linux computer to the domain, and it fails to do so if the hostname is too long due to some legacy NetBIOS naming limitation. Is there a way to authenticate via AD, using only LDAP perhaps? What are the advantages/disadvantages over doing it like that vs just using Likewise?

    Read the article

  • Replacing notebook SATA hard disk with SSD without reinstalling

    - by Graeme Donaldson
    So there's a notebook (Lenovo Thinkpad Z61m) with a SATA hard disk, the SATA controller is configured for native AHCI operation & the OS is Windows XP. The hard disk is going to be replaced with an SSD which is larger. I have an idea of how I'm going to do this, but I want to be sure there isn't something obvious I'm missing. Connect external USB drive Boot some flavour of Linux live CD Use dd to clone the SATA disk to the external drive Power off and replace the SATA disk with the SSD Boot the live CD Use dd to clone back from the external drive to the SSD Does anyone have anything to add?

    Read the article

  • Why is my extended desktop configuration being reset after a reboot with Kubuntu 10.04?

    - by Graeme Donaldson
    I'm running Kubuntu 10.04 x64 on a Lenovo ThinkPad R500, with an external monitor attached. If I configure extended desktop, everything works fine. The settings look like this: After a reboot, these settings are reset and both screens are mirrored. The settings look like this: I had my extended desktop working just fine under Ubuntu/GNOME, so I'm assuming there's something different about how KDE handles this config, I just can't seem to find the answer. Anyone know how to get my configuration to stick?

    Read the article

  • How do I do a swing migration of Exchange 2007?

    - by Graeme Donaldson
    As per my previous question, I have an Exchange 2007 box which is also a DC. Since I can demote it while Exchange is installed, I need to a swing migration. Does anyone have any articles, tips or experiences to share on this? The last time I did a swing it was with Exchange 2003 and even that is a little rusty in my head. The setup is a single Exchange 2007 Hub/Edge/Mailbox/CAS server. Its currently on Windows Server 2008, I can migrate it to the same OS, or I can go to 2008 R2, I'm not really picky on that. We're running OWA/ActiveSync/POP3(S)/IMAP(S) for client access. I already have another fully functional DC/GC/DNS box in the same site and clients in the site are already using that for DNS. It's also the preferred site bridgehead for AD replication. Any tips?

    Read the article

  • Is it possible/practical to install and run Linux on a USB flash drive?

    - by Graeme Donaldson
    I'm going to replace my old 2004 vintage desktop PC soon and I have an idea of what I want to do, I'm just not sure if it's possible or realistic. In the time since I built the old PC it has slowly become less used as a PC and more as a file server, so I figured I'd build a small file server which could also function as a router/DHCP/DNS/whatever box. The idea is to base it on an Atom system. I have my eye on the Intel D510MO for the moment. This supports 2 SATA disks, and I'd prefer to dedicate those to data storage. I'd like to install Ubuntu Server or maybe Debian on a 8/16GB USB flash drive. I have seen plenty of tutorials on how to perform an installation from a USB drive, but I can't seem to find any info on actually booting and running the OS from USB flash. Is this even possible? Is it practical? This box will mostly be used for: Making backups of mine and my wife's notebooks via LAN. Will use SMB or NFS for this. Digital media storage, which will be accessed by a Mede8er box with no storage of its own. I will most likely use NFS for this.

    Read the article

  • Adding value of cell X only if cell Y is blank

    - by Graeme Hutchison
    I have a list with three columns A, B, and C. The first two columns are complete (A and B), while the third (C) has many blanked fields. What I want to do is replace all the blank fields in Column C with the same value form cell A in the same row. The List contains over 2000 records, of which 65% have a blank Column C value, so I would like to use a formula/function. Below is an example of what I have and what I want to do (on a much smaller scale)

    Read the article

  • Exchange 2010 Hub cannot deliver to Exchange 2007 Hub - "451 5.7.3 Cannot achieve Exchange Server authentication"

    - by Graeme Donaldson
    We have an existing Exchange 2007 server in Site A (exch07). I've installed an Exchange 2010 server in Site B (exch10). Both servers have the CAS, Mailbox and Hub roles. Messages sent via SMTP on exch10 which are destined for mailboxes on exch07 are queued with the "Last Error" reported in Queue Viewer as '451 4.4.0 Primary target IP address responded with: "451 5.7.3 Cannot achieve Exchange Server authentication." Attempted failover to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts.' I've found that some people have resolved this by creating new Receive Connectors which are scoped specifically to apply to connections from the remote hub/s, but I have had no luck doing this. Specifically I created new receive connectors on both servers with the following settings: Remote IP = IP/s of remote server Authentication = "Transport Layer Security (TLS)" and "Exchange Server authentication" Permission Groups = "Exchange servers" and "Legacy Exchange Servers" This made no difference, I see the same error message. What am I missing? Update: We noticed that the Application log had this error message from MSExchangeTransportService: Microsoft Exchange could not find a certificate that contains the domain name exch07.domain.local in the personal store on the local computer. Therefore, it is unable to support the STARTTLS SMTP verb for the connector exch10 with a FQDN parameter of exch07.domain.local. If the connector's FQDN is not specified, the computer's FQDN is used. Verify the connector configuration and the installed certificates to make sure that there is a certificate with a domain name for that FQDN. If this certificate exists, run Enable-ExchangeCertificate -Services SMTP to make sure that the Microsoft Exchange Transport service has access to the certificate key. It turns out that the default self-signed certificate was no longer enabled for the SMTP service for some reason. After enabling the self-signed certificate for SMTP, we no longer get the error in the event logs, but delivery is still failing with the same error message. Update 2: I put a mailbox on exch10 and attempted to deliver a message via SMTP on exch07 and I get the same error.

    Read the article

  • Is there a way to "redirect" a click on a URL in a VirtualBox guest to open in the host OS browser?

    - by Graeme Donaldson
    I'm using VirtualBox OSE on Ubuntu 10.04. I have a Windows 7 guest VM which I use almost exclusively for MS Outlook to access my Exchange mailbox. If I click a URL in Outlook it obviously opens in IE in the guest VM, is there any way to have it perform a redirect of some sort? If I click a URL inside the VM, I want it to load in my default browser in the Ubuntu host.

    Read the article

  • How do I migrate Exchange 2007 to new hardware?

    - by Graeme Donaldson
    As per my previous question, I have an Exchange 2007 box which is also a DC. Since I can't demote it while Exchange is installed, I want to move Exchange to a different server. Does anyone have any articles, tips or experiences to share on this? The last time I did this it was with Exchange 2003 and even that is a little rusty in my head. The setup is a single Exchange 2007 Hub/Edge/Mailbox/CAS server. Its currently on Windows Server 2008, I can migrate it to the same OS, or I can go to 2008 R2, I'm not really picky on that. We're running OWA/ActiveSync/POP3(S)/IMAP(S) for client access. I already have another fully functional DC/GC/DNS box in the same site and clients in the site are already using that for DNS. It's also the preferred site bridgehead for AD replication. Update: After reading Evan's answer I realised that my original question wasn't worded correctly. I'm not looking to do a swing migration, I actually need to move Exchange completely over to a new box. I have done swing migrations in the past, i.e. moving over to a temporary box and back to the original hardware afterwards, and I'm not really sure why I used that term in the original question since it's not what I intended. Any tips?

    Read the article

  • Using %v in Apache LogFormat definition matches ServerName instead of specific vhost requested

    - by Graeme Donaldson
    We have an application which uses a DNS wildcard, i.e. *.app.example.com. We're using Apache 2.2 on Ubuntu Hardy. The relevant parts of the Apache config are as follows. In /etc/apache2/httpd.conf: LogFormat "%v %h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" vlog In /etc/apache2/sites-enabled/app.example.com: ServerName app.example.com ServerAlias *.app.example.com ... CustomLog "|/usr/sbin/vlogger -s access.log /var/log/apache2/vlogger" vlog Clients access this application using their own URL, e.g. company1.app.example.com, company2.app.example.com, etc. Previously, the %v in the LogFormat directive would match the hostname of the client request, and we'd get several subdirectories under /var/log/apache2/vlogger corresponding to the various client URLs in use. Now, %v appears to be matching the ServerName value, so we only get one log under /var/log/apache2/vlogger/app.example.com. This breaks our logfile analysis because the log file has no indication of which client the log relates to. I can fix this easily by changing the LogFormat to this: LogFormat "%{Host}i %h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" vlog This will use the HTTP Host: header to tell vlogger which subdirectory to create the logs in and everything will be fine. The only concern I have is that this has worked in the past and I can't find any indication that this has changed recently. Is anyone else using a similar config, i.e. wildcard + vlogger and using %v? Is it working fine?

    Read the article

  • Split DC role from existing Exchange 2007 server

    - by Graeme Donaldson
    We currently have a single Exchange 2007 Server on Windows Server 2008. It's also a DC and I'd like to split the DC role to a different box. Is this doable without migrating the mailboxes off to a temporary box, re-installing and migrating back? I.e. can I just demote the server without breaking Exchange completely? I know this was quite painful with Server 2003/Exchange 2003, so I'm trying to get an idea of how much different the process is for Server 2008/Exchange 2007.

    Read the article

  • Is it safe to delete "Account Unknown" entries from Windows ACLs in a domain environment?

    - by Graeme Donaldson
    It's not uncommon to see entries in Windows ACLs (NTFS files/folders, registry, AD objects, etc.) with the name "Account Unknown (SID)". Obviously these are because of old AD users or groups which at some point had permissions manually configured on the relevant object and have since been deleted. Does anyone know if it is safe to remove these "Account Unknown" ACEs? My gut feeling is that it should be just fine, but I'm wondering if anyone has any past experiences where doing this has caused trouble? Normally I just ignore these, but the company I'm working at now seems to have an abnormal number of these, most likely due to past admins' inexperience with AD/Windows and assigning permissions to user accounts rather than groups in all sorts of weird places. FWIW, our environment is not complex, a single domain forest, 4 DCs in 3 sites, with all network connectivity and replication healthy, so I'm certain that these "Account Unknown" entries are really old accounts, and not just because of some failure to resolve the SID to a human-readable name.

    Read the article

  • VMware vSphere 4.1: host performance graphs show "No data available", except the realtime view, which works fine

    - by Graeme Donaldson
    Here's our scenario: Site 1 has 3 hosts, and our vCenter server is here. Site 2 has 3 hosts. All hosts are ESXi 4.1 update 1. If I view the Performance tab for any host in Site 1, I can view realtime, 1 Day, etc., i.e. all the views give me graph data. For the hosts in Site 2, I can view the realtime graphs, 1 Day and 1 Week both say "No data available". 1 Month had mostly nothing, 1 Year shows that it was working fine for a long time and then started breaking. 1 Month view: 1 Year view: What would cause this loss of performance data?

    Read the article

  • Pivot Table from data with merged cells

    - by Graeme
    I have a energy spreadsheet for multiple sites. the first row has month and year. the next row has columns for date invoice received, KW hours and cost. So there are three columns for each month. I have merged the month cell across the three columns. When i create a pivot table the date kw/h and costs are labled date1, date2, etc. Can I link the months headings to the subheadings to get meaningful headings in the pivot table????

    Read the article

1 2 3 4  | Next Page >