Search Results

Search found 68 results on 3 pages for 'harvey steck'.

Page 1/3 | 1 2 3  | Next Page >

• Mirroring Ubuntu on several systems in a computer lab

  - by Harvey Steck

  I am working in a new refugee school where the only Internet service available is a slow satellite connection. We are about to set up a computer lab (already have desktop systems and am about to install Ubuntu on them). I'm a newbie when it comes to Linux, but it seems a better alternative than pirated copies of Windows. I'd like to set up one Ubuntu system, and then mirror that system on perhaps ten to twenty other systems (all of which would be on an ethernet network). I expect to have an internet connection on the one system that I set up, but then it may be difficult to have enough bandwidth to go through all the same steps on the other ten systems. Can I set up the other ten or twenty computers to get all of their updates/upgrades/configuration from one master system? Can I also set things up so that students cannot change the configuration, install new programs, etc.? Appreciate any help you can give. -- Harvey

  Read the article

• Why is OnDragEnter not called?

  - by Harvey

  I have added the COleDropTarget variable to my view class, Registered it in the OnCreate(), which is being called at startup. I added the OnDragEnter and OnDrop virtual functions (not the others yet, as OnDragLeave). But they are not called when I drag (or drop) a piece of text over them. I just happened to think about the fact that I had already implemented the dropfiles function to the same window. Is this preventing the text drag? What else do I need? TIA, Harvey

  Read the article

• Drop target - where do I register the COleDropTarget variable if the view class doesn't have OnCreat

  - by Harvey

  The MSDN site says: From your view class's function that handles the WM_CREATE message (typically OnCreate), call the new member variable's Register member function. Revoke will be called automatically for you when your view is destroyed. But I don't have an OnCreate function in the ChildView class. I do have OnCreate in the CMainFrame class. Can I register it there? What are the ramifications? PLEASE NOTE: I have it working for dropping files but I want to drop the text as a file, not at a cursor location like a text cut and paste, but rather I want the application to make a buffer to hold it, and I will treat it like a file. TIA, Harvey

  Read the article

• Drag and Drop text - What am I missing?

  - by Harvey

  I am trying to add drag-and-drop text to my Doc-View App. I added the COleDropTarget variable to the view class, registered it in OnCreate(). I added OnDragEnter(), OnDragOver(), OnDragLeave() and OnDrop() to that class as virtual overrides, but none of them are ever called. I previously had added m_pMainWnd-DragAcceptFiles(TRUE); to my App class. I tried commenting out that statement, but no affect. I tried using Spy++ to see where the messages go while I do a drag, but it logs nothing at all while I am dragging the text around in the App. What do I need? Or what else can I try, to narrow down the problem? TIA, Harvey

  Read the article

• Improving the speed of writing code in C#

  - by Robert Harvey

  Laugh if you want, but I used to develop substantial line-of-business applications in VB6, long before the .NET framework came along. Why, when I was your age, we used to walk two miles in the snow, uphill. Both ways... Love it or hate it, VB6 had a REPL-like feel, and a very rapid development cycle. I would like to know how to come closer to that process in C#. In VB6, I could write a function, execute it, debug it and have it fully functional in a few minutes. I am told this is how the Lisp crowd works. It's a very rapid-fire style of programming. In C# I write a function, then I write a unit test for that function (which is OK, I understand the value of that), then I right-click, run test, wait for the project to compile (takes about 10 seconds right now, which would be an eternity for a REPL loop), and get an exception. Honestly, this feels more like my junior college days, when I used to feed punch cards into a hopper and wait for a printout (exaggerating only slightly for effect). Additionally, my tendency nowadays is to make everything public while I'm testing it. Unit testing with private accessors works fine, but you can't trace through the code (unless, of course, I'm doing something wrong) while you're using them. So what I'd like to know is, what adjustments have you made to your development process in C# to streamline it, and make it possible to write and verify your code very rapidly?

  Read the article

• How to fix corrupted desktop icons and fonts?

  - by David Harvey

  I love Linux, but am a real novice. I installed Ubuntu 12.04 LTS 32bit alongside Windows XP. The installation seems to work just fine except for the desktop. The icons & font becomes corrupted to the point that it looks like Chinese. After surfing with Mozilla Firefox for a long time, the same problem begins with the web pages. I want to be free of Windows, but must solve this problem first. Can you help? Thank you.

  Read the article

• On developing deep programming knowledge

  - by Robert Harvey

  Occasionally I see questions about edge cases and other weirdness on Stack Overflow that are easily answered by the likes of Jon Skeet and Eric Lippert, demonstrating a deep knowledge of the language and its many intricacies, like this one: You might think that in order to use a foreach loop, the collection you are iterating over must implement IEnumerable or IEnumerable<T>. But as it turns out, that is not actually a requirement. What is required is that the type of the collection must have a public method called GetEnumerator, and that must return some type that has a public property getter called Current and a public method MoveNext that returns a bool. If the compiler can determine that all of those requirements are met then the code is generated to use those methods. Only if those requirements are not met do we check to see if the object implements IEnumerable or IEnumerable<T>. That's cool stuff to know. I can understand why Eric knows this; he's on the compiler team, so he has to know. But what about those who demonstrate such deep knowledge who are not insiders? How do mere mortals (who are not on the C# compiler team) find out about stuff like this? Specifically, are there methods these folks use to systematically root out such knowledge, explore it and internalize it (make it their own)?

  Read the article

• Render web page to picture.

  - by Steck

  I have the string with URL. For example "http://google.com". Is there are any way to download and render this page to picture file? ("test.jpg") I tried to use WebBrowser control, to download and render picture, but it only works when WebBrowser placed in displayed form. In other ways it's render only black rectangle. But i want to render picture without any visual effect (creating, activating form etc.)

  Read the article

• Why have my Aperture referenced files disappeared without trace?

  - by Andy Harvey

  I have an Aperture library that I've been using for several years. In the past week a number of recent photos and movies have mysteriously disappeared. The missing files were all safely imported within the last week (I had reviewed some of the movies within Aperture, so know this to be true). The files were all referenced on an external drive. Within Aperture the files now have a "referenced file can't be found" icon. I've tried searching for the missing files manually, including within the Aperture library package, but they cannot be found anywhere. How can I (a) work out where the missing files have gone, and (b) identify the cause and ensure it doesn't happen again? I'm using Aperture 3.3.2.

  Read the article

• System32 files can be deleted in Windows 2008 but not in Windows 2003 [closed]

  - by Harvey Kwok

  I have been using Windows 2003 for a long time. There is a wonderful feature. I don't know the name of it but the feature is like this. You can rename or delete some important files inside C:\windows\system32. e.g. kerberos.dll. After a while, the deleted files will be automatically recovered. I think this is because those files are criticl enough that Windows cannot survive without them. However, in Windows 2008, this feature is gone. Instead, all the files in System32 are owned by TrustedInstaller. However, as a administrator, I can still take the ownserhip of the files and then delete them. Windwos 2008 won't recover the deleted files and hence the system is screwed next time it's reboot. So, I wonder why Windows 2008 dropping that wonderful feature. Was that auto-recovery feature also suffer from some issues? Does Windows 2008 have some other features that can prevent this type of disaster from happening?

  Read the article

• High-end CD/DVD burners?

  - by Robert Harvey

  Do such things exist? I wouldn't mind paying $100 to $200 for one, but it must: Have a very fast spin-up to ready time (less than one second) Have an even faster dismount time (say, half second) Can go from dead stop to laying down bits in two seconds or less Can be instantly abortable and resettable regardless of current operational state Does anyone know of such an animal?

  Read the article

• Cannot right click desktop windows xp

  - by Robert Harvey

  This occurred after a Trojan incident. We managed to get the Trojan cleaned off the computer, but now we can't Right click the desktop. We have tried changing HKCU/software/microsoft/windows/current version/policies/explorer/noviewcontextmenu in the registry, and group policy user configuration/administrative templates/windows explorer/remove windows explorers default context menu, but neither worked. How do we reenable the right-click menu for the desktop? (it works everywhere else)

  Read the article

• Windows 2003 R2 zip program blocking EXE file

  - by Harvey Kwok

  I have a Windows 2003 R2 Enterprise Edition SP2 32-bit machine with all latest patch (as of 1-6-2011). It's a VM. I have a zip file, including a pdf file, a txt file and a exe file. If I copy the zip file onto the machine via a shared network drive, I can unzip all the files properly without problems. If I put the zip file on my web server and then I download it from there, I can only unzip the pdf file and txt file. The exe file is silently ignored. I searched the web and found somebody reporting similar issue on XP. If I right click on the zip file downloaded from the web server, at the bottom of the general page, it has a warning message saying that "This file came from antoher computer and might be blocked to help protect this computer" I understand that I can solve the problem by simply clicking the "Unblock" button and extract the file again. The things that bothering me is that why the warning message says "might be blocked"? I tried downloading the same zip file from the same web server on to my Windows 7 box with latest patch. It also shows the same warning message. However, even with the warning message, I can extract all the files properly without clicking the "Unblock" button. Is it a bug in Windows 2003 R2 SP1? Is there any security settings controlling this? How likely will the end user seeing this problem? I want to dig into this because I am worrying people downloading my zip file from my web server might see similar problems. The first thought coming to the user's mind will be the zip file is somehow corrupted. Honestly, I didn't know this "Unblock" feature in Windows before I run into this problem. EDIT I just tried it on another Windows 2003 R2 SP1 machine. The zip program doesn't block the EXE file on that machine either. Both Windows 2003 R2 SP1 machines are joining to the same forest.

  Read the article

• What parts of a motherboard age, and how can I choose one with the longest possible life?

  - by Robert Harvey

  I have a home-built computer that's probably about four years old. I realize this probably seems ancient to some folks, but computers have no moving parts (except the fans), so theoretically they should last a long time, if I still have software to run on them. A few weeks ago, it began blue-screening and freezing up, with various error messages. It almost always happened about five minutes after startup. I assumed that the video card was overheating, since the cheap little fan on the heatsink died, so I replaced it. Long story short, after upgrading the video drivers a couple of times and performing some other troubleshooting, I remembered that the last time this happened, I took out the memory SIMS and cleaned the contacts with a gum eraser, so I did that again (noting that the SATA cables were very close to the chips on the SIMS). I re-routed the cables and reinstalled the SIMS. So far, so good; the machine has been trouble-free since. But blue-screens are distressing; I never know what bits are being chewed up in my OS installation when something like this happens. So I'm wondering if I'm choosing my components properly. If it matters, it's an Intel D915GAG motherboard and Corsair memory, but what I'm wondering is, should I be looking for certain characteristics when I choose these parts for my next computer, so that I can avoid this problem in my next build?

  Read the article

• How can I format an SD card with a more robust Linux-usable filesystem with a specific cluster size for better write performace?

  - by Harvey

  Goal: microSD card formatted... for best write performance for use only with embedded Linux for better reliability (random power failures may occur) using an 64kB cluster size I'm using an 8GB microSD card for data storage inside an embedded Linux/ARM device. The SD card is not removable. I've been using ext3 instead of the pre-installed FAT32 because it seems to better handle random power failures during writes. However, I kept noticing that my write performance is always best with the pre-installed FAT32 from Kingston. If I reformat the card with FAT32, the performance still suffers. After browsing wikipedia, I stumbled upon the following comment saying that some cards are optimized for specific cluster sizes. In my case, the Kingston comes pre-formatted for an 64kB cluster size. Risks of reformatting Reformatting an SD card with a different file system, or even with the same one, may make the card slower, or shorten its lifespan. Some cards use wear leveling, in which frequently modified blocks are mapped to different portions of memory at different times, and some wear-leveling algorithms are designed for the access patterns typical of the file allocation table on a FAT16 or FAT32 device.[60] In addition, the preformatted file system may use a cluster size that matches the erase region of the physical memory on the card; reformatting may change the cluster size and make writes less efficient.

  Read the article

• Ubuntu 10.04->10.10 in failed state - how to recover?

  - by Harvey

  I was running Ubuntu 10.04 and attempted to upgrade to 10.10. I have a really slow connection (DSL 128kbits/sec) and copying the upgrade files took about 26 hours. I of course let it run unattended. When I came back, I notice the following 3 dlgs: (1) "Could not install the upgrades The upgrade has aborted. Your system could be in an unusable state. A recovery will run now (dpkg -- configure -a)." (2) "gpk-update-icon Distribution upgrades available maverick 10.10 (stable) [more information] [Do no show this again] [Cancel] [Ok]" (3) "gpk-update-icon Security updates available The following important updates are available for your computer: libwebkit-1.0-2-dbg - Web content engine library for Gtk+ - Debugging symbols libcupsimage2 - Common UNIX Printing System(tm) - Raster image library ..." What is the best response to all of this? I went through something similar in an attempted network upgrade from 8.04 to 10.04 and had to reload the unbootable machine fresh from distribution media (all data was lost). I'd like to avoid that here. I have not yet responded to the dialogs, and want to make sure the system is still bootable and not lose my data this time.

  Read the article

• What's the meaning of logging in as "[email protected]:something"

  - by Harvey Kwok

  My Windows 2008 R2 machine is joined to a domain. In the logon screen, if I type in "[email protected]:something" as the username, I can still logon properly, what's the meaning of ":something" appended at the end? I can even see the current user is displayed as "[email protected]:something" in the switch user screen. Is it a feature in Windows? Or is it just a bug? If it is a feature, what's the difference between logging in as "[email protected]" and logging in as "[email protected]:something"? Note that I tried different combinations like "mydomain\username:something" and "mydomain.com:something\username". None of them work except "[email protected]:something".

  Read the article

• Ubuntu in failed state after upgrade from 10.04 to 10.10 - How to recover?

  - by Harvey

  I was running Ubuntu 10.04 and attempted to upgrade to 10.10. I have a really slow connection (DSL 128kbits/sec) and copying the upgrade files took about 26 hours. I of course let it run unattended. When I came back, I notice the following 3 dlgs: 1. Could not install the upgrades The upgrade has aborted. Your system could be in an unusable state. A recovery will run now (dpkg -- configure -a). 2. gpk-update-icon Distribution upgrades available maverick 10.10 (stable) [more information] [Do no show this again] [Cancel] [Ok] 3. gpk-update-icon Security updates available The following important updates are available for your computer: libwebkit-1.0-2-dbg - Web content engine library for Gtk+ - Debugging symbols libcupsimage2 - Common UNIX Printing System(tm) - Raster image library ... What is the best response to all of this? I went through something similar in an attempted network upgrade from 8.04 to 10.04 and had to reload the unbootable machine fresh from distribution media (all data was lost). I'd like to avoid that here. I have not yet responded to the dialogs, and want to make sure the system is still bootable and not lose my data this time.

  Read the article

• Pentium 4 Computer Won't Power Up

  - by Harvey

  I have a faulty Pentium 4 workstation with data that I would like to retrieve. Here are the symptoms & what I've done so far: Machine is totally dead. Motherboard LED is lit but that is the only sign of life. I have replaced the power supply and bypassed the on/off switch. Tried a PC Analyzer motherboard tester but didn't have any power to the card. Unpluggged the P4 cable from the motherboard, hit the on/off switch, the power supply fan comes on and I get codes from the analyzer but nothing that seems to be of any value. Machine does not boot. Will not shut down by hitting the switch. Bad motherboard or could it be a bad CPU cooling fan?

  Read the article

• Robbie: A Short Film Made Entirely From NASA Footage [Video]

  - by Jason Fitzpatrick

  Neil Harvey artfully took 8 minutes of NASA footage and spliced it together with a musical score and narrative overlay to create the story of Robbie; a self aware robot. If your boss asks why you’re crying in your cubicle, just make him watch it too. [via Neatorama] HTG Explains: Is ReadyBoost Worth Using? HTG Explains: What The Windows Event Viewer Is and How You Can Use It HTG Explains: How Windows Uses The Task Scheduler for System Tasks

  Read the article

• Report: 50 Open Source Security Tools

  The Free/Open Source software world offers great thundering herds of excellent security software; Cynthia Harvey presents a sampling of 50 FOSS applications for everything from anti-malware to forensics to Internet gateways to networking monitoring, and then some.

  Read the article

• Review: 75 Ways to Secure Your Linux/Mac/Windows Systems With Open Source

  The Linux/Free Software/Open Source world is cram-full of first-class security applications. Best of all, they're not just for Linux, but protect Mac and Windows too. Cynthia Harvey collects 75 to share with us.

  Read the article

• What is required to use LODSB in assembly?

  - by Harvey

  What is the minimum set of steps required to use LODSB to load a relative address to a string in my code? I have the following test program that I'm using PXE to boot. I boot it two ways: via pxelinux.0 and directly. If I boot it directly, my program prints both strings. If I boot via pxelinux.0, it only prints the first string. Why? Working technique (for both): Set the direction flag to increment, cld Set ds to cs Put the address (from start) of string in si Add the starting offset to si Non-working technique (just for pxelinux): Calculate a new segment address based on (((cs << 4) + offset) >> 4) Set ds to that. (either A000 or 07C0) text here to fix bug in markdown // Note: If you try this code, don't forget to set // the "#if 0" below appropriately! .text .globl start, _start start: _start: _start1: .code16 jmp real_start . = _start1 + 0x1fe .byte 0x55, 0xAA // Next sector . = _start1 + 0x200 jmp real_start test1_str: .asciz "\r\nTest: 9020:fe00" test2_str: .asciz "\r\nTest: a000:0000" real_start: cld // Make sure %si gets incremented. #if 0 // When loaded by pxelinux, we're here: // 9020:fe00 ==> a000:0000 // This works. movw $0x9020, %bx movw %bx, %ds movw $(test1_str - _start1), %si addw $0xfe00, %si call print_message // This does not. movw $0xA000, %bx movw %bx, %ds movw $(test2_str - _start1), %si call print_message #else // If we are loaded directly without pxelinux, we're here: // 0000:7c00 ==> 07c0:0000 // This works. movw $0x0000, %bx movw %bx, %ds movw $(test1_str - _start1), %si addw $0x7c00, %si call print_message // This does, too. movw $0x07c0, %bx movw %bx, %ds movw $(test2_str - _start1), %si call print_message #endif // Hang the computer sti 1: jmp 1b // Prints string DS:SI (modifies AX BX SI) print_message: pushw %ax jmp 2f 3: movb $0x0e, %ah /* print char in AL */ int $0x10 /* via TTY mode */ 2: lodsb (%si), %al /* get token */ cmpb $0, %al /* end of string? */ jne 3b popw %ax ret .balign 0x200 Here's the compilation: /usr/bin/ccache gcc -Os -fno-stack-protector -fno-builtin -nostdinc -DSUPPORT_SERIAL=1 -DSUPPORT_HERCULES=1 -DSUPPORT_GRAPHICS=1 -DHAVE_CONFIG_H -I. -Wall -ggdb3 -Wmissing-prototypes -Wunused -Wshadow -Wpointer-arith -falign-jumps=1 -falign-loops=1 -falign-functions=1 -Wundef -g -c -o ds_teststart_exec-ds_teststart.o ds_test.S /usr/bin/ccache gcc -g -o ds_teststart.exec -nostdlib -Wl,-N -Wl,-Ttext -Wl,8000 ds_teststart_exec-ds_teststart.o objcopy -O binary ds_teststart.exec ds_teststart

  Read the article

• Is it possible to get Cufon to work on a button?

  - by Tom Harvey

  So right now I'm bashing my head - at the moment we use an element for a button to give it our own custom font, fine - this works, but as we're using Cufon on the rest of the site, we're wondering if it's possible to get Cufon working on a button. So far I've changed the button to an and using standard css styles on an 'input' or 'input[type="submit"]' element work fine - but I've tried both of these in cufon to no avail. This is a button - so as Cufon generates images, this should work, but maybe I'm doing it wrong - can anyone help?

  Read the article

• Installing MonoDevelop on Suse Enterprise 10.0

  - by Robert Harvey

  I tried to install MonoDevelop on Suse 11.0 Enterprise, using the 1-click install on the MonoDevelop download page, but quickly wound up in a tangle of missing dependencies. I then tried using the Suse software repositories to get MonoDevelop, and waded through several of the dependencies for awhile trying to get the necessary packages to fulfill the dependencies, but some of the packages in the Suse repositories actually appear to be missing the needed RPM files. Are these repositories no longer being actively maintained? I am aware that there is a CD on the Mono site (called the Mono LiveCD) that appears to contain a complete installation of the development environment, as well as a DVD for OpenSuse 11.2 (on the OpenSuse site) that might actually have all of the Mono software already installed. But the target environment for the utility I am writing is Suse 11.0 Enterprise Server. Does that matter? What is the shortest distance between two points here?

  Read the article

1 2 3  | Next Page >