Search Results

Search found 654 results on 27 pages for 'hdmi'.

Page 1/27 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• HDMI Sound Stops Working

  - by stueng

  When not used for a few hours the sound stops working on my HTPC. To get sound to work again I have to unplug the HDMI cable and plug it back in again When this sound "outage" occurs, the HDMI device dissapears from the sound config output devices I see the following in dmesg [78534.010328] HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [78534.010363] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [78558.948403] HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1 [78558.948429] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [78562.579047] HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=0 [78562.579078] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1 [78562.579992] HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=1 [78562.580043] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1 [78562.876030] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1 [78563.176036] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1 [78563.195139] HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [78563.195169] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [78563.476030] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [78635.529493] HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1 [78635.529524] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [78641.330701] HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=0 [78641.330733] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1 [78641.331649] HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=1 [78641.331668] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1 [78641.628050] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1 [78641.928037] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1 [78642.228042] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1 [78642.528039] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1 [78642.828037] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1

  Read the article

• DVI+HDMI out, at startup only HDMI is available

  - by Alasjo

  I have my computer next to my hdtv. The main screen is connected via DVI while the tv is connected via HDMI. If I start the computer without the HDMI plugged in, everything is ok: I see the login screen and sound is output through analog out. But if the HDMI is plugged in before I start the computer, only the tv gets an image (the login screen), the main screen is black or at some times purple, but even after login the main screen is black. Also sound is still output through analog out. Not sure whether it's a hw issue, or an Ubuntu issue, or a combined hardware/Ubuntu compatibility issue (Sandy Bridge). This is my setup: Ubuntu 11.10 Oneiric Ocelot (64bit) ASUS P8H67-M LE Intel Core i3-2100 I don't have any custom video settings, my main screen is recognized properly when HDMI is not plugged in at startup. Cheers.

  Read the article

• No HDMI sound output on Thinkpad X1

  - by nickf

  I'm having problems getting my sound to output via HDMI to my TV. When I go to Sound Settings, the HDMI device does not appear. ~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 I don't know if the video information is helpful, but anyway: ~$ sudo lshw -C video *-display description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:46 memory:d0000000-d03fffff memory:c0000000-cfffffff ioport:5000(size=64) Any suggestions for me?

  Read the article

• HDMI Audio stops after TV turned off

  - by Ryan

  After the 12.04 Update my HDMI audio stops working anytime I turn off my 2nd monitor(plasma TV). Graphics card is a Radeon 6800 which has DVI out to 1st monitor, HDMI out to receiver which the TV gets it's Audio/Video. Audio is always via my receiver sound. Things work fine as long as it boots with the TV and Receiver on. Turn off the TV and BART's HDMI audio will go away, and the HDMI option vanishes from the sound menu. I had an occasional HDMI issue with 11.10 but turning on/off the TV would fix the sound. How can I hardcode things so that it always uses HDMI out of audio? I suspect the TV is sending a signal upon that 12.04 is now listening for. Turning the TV back on does NOT resolve this, and I'd suggest having the ability to override this new "feature" via sound menu.

  Read the article

• EHome IR receiver and Ubuntu 13 - any one have this working?

  - by squakie

  I have a "generic" USB IR receiver I purchased off of Ebay to make my life a little easier with XBMC on my Ubuntu box. I am currently running 13.10 and have never tried nor have any knowledge of IR in Ubuntu. I know of lirc, and I know a lot of it is now included in the kernel. My understanding is that lirc in basic terms maps pulses from an remote control to functions - like keyboard or mouse clicks. It is also my understanding that I might still need a driver or something for my device. lsusb shows the device as: Bus 006 Device 003: ID 147a:e016 Formosa Industrial Computing, Inc. eHome Infrared Receiver dmesg shows the following pertaining to the device: [43635.311985] usb 6-2: USB disconnect, device number 2 [43641.344387] usb 6-2: new full-speed USB device number 3 using ohci-pci [43641.543454] usb 6-2: New USB device found, idVendor=147a, idProduct=e016 [43641.543467] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [43641.543473] usb 6-2: Product: eHome Infrared Transceiver [43641.543478] usb 6-2: Manufacturer: Formosa21 [43641.543483] usb 6-2: SerialNumber: FM000623 [43641.555736] Registered IR keymap rc-rc6-mce [43641.555968] input: Media Center Ed. eHome Infrared Remote Transceiver (147a:e016) as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.0/rc/rc2/input15 [43641.556221] rc2: Media Center Ed. eHome Infrared Remote Transceiver (147a:e016) as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.0/rc/rc2 [43641.556584] input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/input16 [43641.557186] rc rc2: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0 [43641.731965] mceusb 6-2:1.0: Registered Formosa21 eHome Infrared Transceiver with mce emulator interface version 1 [43641.731978] mceusb 6-2:1.0: 2 tx ports (0x0 cabled) and 2 rx sensors (0x0 active) (excuse the double spacing, but I had to put in extra cr/lf using "enter" or the entire thing was just one long unreadable string). When I connect the same IR receiver to a Raspberry Pi running OpenELEC/XBMC there is no flashing led unless I press a remote button, and the device works. In Ubuntu, the led is constantly blinking, and nothing happens when I press a remote key. I tried the command line program to test but it never echoes anything back to the terminal window. I believe it must need some sort of driver or something else, but I am completely in the dark on this. If it matters I also have: - Logitech wireless keyboard/mouse USB receiver - Tenda USB wireless adapter And.....I've also noticed some errors now that show in dmesg that seem to somehow related to HDMI if that makes any sense: 46721.144731] HDMI: ELD buf size is 0, force 128 [46721.144749] HDMI: invalid ELD data byte 0 [46721.444025] HDMI: ELD buf size is 0, force 128 [46721.444061] HDMI: invalid ELD data byte 0 [46721.743375] HDMI: ELD buf size is 0, force 128 [46721.743411] HDMI: invalid ELD data byte 0 [46722.043092] HDMI: ELD buf size is 0, force 128 [46722.043118] HDMI: invalid ELD data byte 0 [46722.343086] HDMI: ELD buf size is 0, force 128 [46722.343122] HDMI: invalid ELD data byte 0 [46722.642517] HDMI: ELD buf size is 0, force 128 [46722.642574] HDMI: invalid ELD data byte 0 [46722.942459] HDMI: ELD buf size is 0, force 128 [46722.942485] HDMI: invalid ELD data byte 0 [46723.242103] HDMI: ELD buf size is 0, force 128 [46723.242129] HDMI: invalid ELD data byte 0 [46723.541877] HDMI: ELD buf size is 0, force 128 [46723.541923] HDMI: invalid ELD data byte 0 [58366.651954] HDMI: ELD buf size is 0, force 128 [58366.651980] HDMI: invalid ELD data byte 0 [58366.951523] HDMI: ELD buf size is 0, force 128 [58366.951549] HDMI: invalid ELD data byte 0 [58367.251075] HDMI: ELD buf size is 0, force 128 [58367.251121] HDMI: invalid ELD data byte 0 [58367.550517] HDMI: ELD buf size is 0, force 128 [58367.550563] HDMI: invalid ELD data byte 0 [58367.850219] HDMI: ELD buf size is 0, force 128 [58367.850256] HDMI: invalid ELD data byte 0 [58368.150160] HDMI: ELD buf size is 0, force 128 [58368.150185] HDMI: invalid ELD data byte 0 [58368.449544] HDMI: ELD buf size is 0, force 128 [58368.449570] HDMI: invalid ELD data byte 0 [58368.749583] HDMI: ELD buf size is 0, force 128 [58368.749629] HDMI: invalid ELD data byte 0 [58369.049280] HDMI: ELD buf size is 0, force 128 [58369.049326] HDMI: invalid ELD data byte 0 [58394.706273] HDMI: ELD buf size is 0, force 128 [58394.706300] HDMI: invalid ELD data byte 0 [58394.706350] HDMI: ELD buf size is 0, force 128 [58394.706367] HDMI: invalid ELD data byte 0 [58395.003032] HDMI: ELD buf size is 0, force 128 [58395.003058] HDMI: invalid ELD data byte 0 [58395.302680] HDMI: ELD buf size is 0, force 128 [58395.302705] HDMI: invalid ELD data byte 0 [58395.602442] HDMI: ELD buf size is 0, force 128 [58395.602477] HDMI: invalid ELD data byte 0 [58395.902143] HDMI: ELD buf size is 0, force 128 [58395.902179] HDMI: invalid ELD data byte 0 [58396.201839] HDMI: ELD buf size is 0, force 128 [58396.201875] HDMI: invalid ELD data byte 0 [58396.501538] HDMI: ELD buf size is 0, force 128 [58396.501574] HDMI: invalid ELD data byte 0 [58396.801232] HDMI: ELD buf size is 0, force 128 [58396.801268] HDMI: invalid ELD data byte 0 [58397.100583] HDMI: ELD buf size is 0, force 128 [58397.100627] HDMI: invalid ELD data byte 0 [63095.766042] systemd-hostnamed[8875]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! dave@davepc:~$ EDIT: Maybe another way to look at this would be what does Ubuntu do or not do that OpenELEC does or doesn't do (on Raspberry Pi) such that it works in OpenELEC but not in Ubuntu?

  Read the article

• 12.10 no audio via hdmi and video speeds up

  - by jackson

  I have a laptop with an ati radeon 4200, on 12.04 everything worked fine, since upgrading to 12.10 I cannot get sound over the hdmi. When I switch to hdmi audio the video speeds up to about 2x. I can use the speakers in my laptop and watch video via hdmi with no problems. Things I have tried: Various tutorials to install the AMD/ATI drivers, all of which resulted in low graphics mode. Checked that everything is properly set in alsamixer, the sound utility and - installed pavucontrol and checked everything in there. Verified the output from cat /proc/asound/cards looks normal When I initially upgraded there was a plethora of problems which I believe were due to the old proprietary driver still being used but not compatible, after a few hours trying to fix that I decided just to back up and do a fresh install which works great except for the above stated problem. Any help would be greatly appreciated!! Finally hopefully this hasn't already been answered, I have tried a few different searches on the boards and haven't come up with anything. $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: SB [HDA ATI SB], device 0: ALC269VB Analog [ALC269VB Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0] Subdevices: 0/1 Subdevice #0: subdevice #0

  Read the article

• HDMI-HDMI cable length

  - by alex

  I'd like to connect my PC to an HDTV using an HDMI-HDMI cable. The distance between them is about 8 m; is the length going to be an issue? I'm worried the signal might deteriorate over such a distance. Also, does price have any major impact on the signal quality? I'd like to buy an 8-10 m cable for somewhere around 20$. Would such a cheap cable be good for what I want?

  Read the article

• HDMI not working after installing ubuntu-gnome-desktop on Ubuntu 14.04

  - by Mauricio

  So, I installed ubuntu-gnome-desktop on ubuntu 14.04 and HDMI stopped working (not sure what else isn't working anymore, but HDMI is the most immediate thing I noticed). I also have kubuntu-desktop installed and HDMI doesn't work there either. So I ran xrandr and, as I feared, it doesn't detect HDMI anymore. HDMI worked fine before installing gnome, and it literally stopped working after the reboot right after the install. Any help? I've already removed ubuntu-gnome-desktop and rebooted to no avail. Many thanks!

  Read the article

• On-board HDMI Audio

  - by TrackStar

  I have tried searching for answers to this issue but have had no luck. My HDMI display is working but I have no audio from the HDMI .There is no option for HDMI under sound preferences hardware or output. Purging and re-installing pulse audio doesn't change anything. I am using the on-board HDMI port on my motherboard, I do not have a PCI graphics card installed. CPU: i7-3770 Mobo: Asus Sabertooth z77 Kernel: 2.6.39-3-bb03 running aplay -l returns ** List of PLAYBACK Hardware Devices ** card 0: Intel [HDA Intel], device 0: ALC892 Analog [ALC892 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC892 Digital [ALC892 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 Seems as if the system doesn't even recognize the possibilty of HDMI audio output. Any ideas?

  Read the article

• HDMI video output not working for external monitor

  - by user291852

  I have installed from scratch ubuntu GNOME 14.04 with gnome-flashback on my old HP HDX 16 laptop (core 2 duo p8600 + nvidia GT9600M + 4GB of ram) and I have problems with the HDMI output (I use it to extend my desktop on a dell U2412M 1920x1200 monitor). In the following I summarize the configurations that I have tried: Using the open source nouveau drivers, only the laptop monitor works, no signal from the external monitor connected to the HDMI output. However, the output of the xrandr command show that the HDMI output is connected with the correct resolution 1920x1200 (I find this thing really weird). Nouveau drivers with VGA connection works without problems on the external monitor, but the image is blurry compared to the HDMI connection. Using the nvidia drivers (I have tried different versions: nvidia-331-updates and the xorg-edgers versions nvidia-334 and nvidia-337) the HDMI output works, but I have system instabilities, random crashes and display freezes. I can't even enter in terminal mode with ctrl-alt-f1, so I have to manually shut down the laptop with the power button. I really would like to use the HDMI output with the nouveau drivers to avoid the system instabilities that I experienced with the nvidia drivers, but I can't figure out how to make it works. Alessandro

  Read the article

• HDMI port not recognized on Sony Vaio

  - by julio

  I am running Ubuntu 11.10 64bit with a Sony VAIO VPC F11. It has an NVIDIA GeForce 310M video card, with the latest Nvidia drivers for the 64 bit linux, and a Windows partition with Win7 64bit. NVIDIA driver version is NVIDIA-Linux-x86_64-280.13 External monitor is Samsung SyncMaster P2770 If I boot into the Windows partition, the HDMI works as expected, with sound and video-- under linux, the HDMI port is not recognized at all, apparently, and provides no signal to the attached monitor. The nividia-settings tool does not recognize any monitor connected to the HDMI port. Disper is installed and cannot recognize an attached external monitor. Can anyone help me diagnose this issue and fix it if possible? The laptop has only the one HDMI port to connect any external monitor, so it I can't get this working I'm stuck using either the laptop screen or Windows. Thanks

  Read the article

• No sound through hdmi to TV

  - by Santosh

  I have a Toshiba Satellite Laptop Model P745-S4102 with Intel integrated graphics and Ubuntu 12.04 LTS installed recently. When I connect my HDMI TV to it I only get video through it and no audio. In the System Settings - Sound, there is no option to select HDMI as the output. I read other threads in this site and it seems like at least guys had HDMI option but no sound. I don't even get that. Please help!!

  Read the article

• SAPPHIRE HD 7770 no audio on HDMI TV display

  - by zeroconf

  I have SAPPHIRE HD 7770 and cannot get work audio over HDMI. http://www.sapphiretech.com/presentation/product/?cid=1&gid=3&sgid=1159&lid=1&pid=1452&leg=0 I use Ubuntu 12.04 LTS 64-bit version with all current updates. I tried at /etc/default/grub: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash radeon.audio=1" ... it didn't help. It's probably I use proprietary driver -this seems to be open source driver. I use the driver, what jockey-gtk (additional drivers) offered me: ATI/AMD PROPRIETARY FGLRX GRAPHICS DRIVER <---- I installed that one ATI/AMD PROPRIETARY FGLRX GRAPHICS DRIVER (post-release update) So - I installed the first one, because installing second version failed. Everything went fine but no sound at TV display by HDMI. Even Gnome sound mixer doesn't show HDMI choice. Using 32" Samsung B530 LCD TV - http://www.lcdbesttv.com/2010/02/samsung-b530-series-lcd-tv/ I have Asus P8Z77-M motherboard - http://www.asus.com/Motherboards/Intel_Socket_1155/P8Z77M/ - there is also HDMI integrated. When I put HDMI cord to that plug, then even Gnome sound mixer showed HDMI audio but it didn't work. I have set from BIOS, that I use that SAPPHIRE HD 7770 from PCIe. My lspci output: 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Ivy Bridge PCI Express Root Port (rev 09) 00:02.0 Display controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.5 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 6 (rev c4) 00:1c.6 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Device 683d 01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Device aab0 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 09) 04:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 03)

  Read the article

• Why must I restart for HDMI audio?

  - by David Shochat

  I have a System76 Lemur Ultra laptop, which has an HDMI port. When I plug in the HDMI cable, it is recognized immediately for video, but not for audio, i.e., it does not show up in the Output tab of the Sound Settings dialog. However, if I do a full restart with the cable plugged in, then it does show up and can be selected. I've also discovered that manually killing and restarting pulseaudio with the HDMI plugged in will force it to be recognized as an available audio output. So my question is, what is broken here? I've thought about writing a bug in launchpad, but I don't know which component is malfunctioning. Is it the kernel? ALSA? Pulse Audio? Something else? By the way, the same bug seems to exist in reverse, namely if I disconnect the HDMI, it is still listed in the Output tab until I again restart the OS. This is 12.04 LTS.

  Read the article

• After update, audio won't play throw hdmi cable

  - by ckhenderson

  Yesterday (June 7th) I faithfully updated a bunch of stuff through update manager (though I'm not sure what since I never read what I updated any more because I'm a bad person). Afterward, I discovered that I could no longer play audio through my tv via HDMI. The sound settings menu seems to have completely changed and the shell script that I wrote a week ago (with much pain and effort as I had never before written a shell script) to toggle between my laptop speakers and the HDMI cable output no longer works. When I type in pactl set-card-profile 0 output:hdmi-surround in the command line I get Failure: No such entity Presumably this means something with Pulse Audio changed but, while I'm learning a lot about the inner workings of Ubuntu/Linux, I'm not an expert and would love some help. EDIT: So I noticed that pacmd set-card-profile 0 output:hdmi-stereo seems to get everything working. Still, shouldn't there be a way to do this through the GUI as well?

  Read the article

• Commands to run when Connecting HDMI

  - by yurividal

  Everytime I connect my pc to my tv using my HDMI cable (to watch my movies), I have to manually go to: 1- Monitors, to select "mirror" screen to HDMI 2- Sound, to select the HDMI as default sound output 3- Screen Off an Lock, to avoid screen locking while watching a video. Is there a way I can automate this? Or at least write a script with commands that will do this. (I could manually run a script every time I connect my HDMI, and then run annother one to undo the changes later) How can I do these actions from a Command Line?

  Read the article

• Sound through HDMI with the NVIDIA drivers

  - by William

  I am running a media center setup with the display through HDMI, powered by a NVIDIA card. I am using the proprietary NVIDIA drivers availabler through the additional drivers utility, on Xubuntu 11.10. In the mixer, I have all the volumes unmuted and turned up to 100%, but no sound through the HDMI. If I plug in speakers the nd comes through just fine. What can I do to make the sound go through the HDMI and to the TV?

  Read the article

• No sound Ubuntu 12.04 through HDMI

  - by MikeMan

  Specs: Asus G73JH i7/720; ATI Mobility 5870 I have read through a lot of threads on getting HDMI sound to work and non of them have fixed my issue. Granted I am very new to Linux and know only the GUI aspect of what it does from finding similarities that Windows 7 has. I would like to become a Linux Power User and I figured this would be a good step to get started. I was able to successfully install my graphics driver and it shows in use. I connect the HDMI to my HD TV and I get no sound. I don't care about auto switch for sound, that would be great but not necessary. I just want my sound to work through the HDMI. What I have tried: Changed GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" to GRUB_CMDLINE_LINUX_DEFAULT="quiet splash radeon.audio=1" pact set-card-profile 0 output:hdmi-surround Failure: no such entity Sound Settings: Right-click Sound indicator ? Sound Settings ? Output Tab, and set Digital Output (S/PDIF) Built in Audio Speakers Built in Audio I only get 2 settings. If I right-click the area below those 2 in the "play sound through" box, I get no "show hidden devices". I am also doing all this with the HDMI connected to eliminate any possibility for error.

  Read the article

• HDMI sound gone, can't figure out how to turn it back on

  - by Oli

  I have had an Acer Revo box as a media centre for a while. I recently installed Ubuntu Server (10.10) on it and polished it up with nodm (one of the most simple ways to launch an X session) and installed boxee. It's been working fine for over a month. It's just running ALSA. I've had problems with PulseAudio/Boxee/HDMI before so I wanted to keep it simple. And that worked. It pushed both PCM and digital (AAC and various Dolby codecs) over HDMI perfectly. But I restarted it the other day after mucking around with some nfs configuration and now there isn't any sound. The hardware is an ION chipset. Nvidia 9400M graphics with Nvidia MCP79/7A audio. One thing I have noticed is there doesn't appear to be any sign of a IEC958 device. A traditional fix in the past for fresh installs has been to load alsamixer, find the IEC device and toggle its mute but I can't. I'm certain this used to represent the HDMI output. It just doesn't seem to exist any more unless I run sudo alsa-utils restart while boxee is running, when I see it in an error message: * Shutting down ALSA... [ OK ] * Setting up ALSA... * warning: 'alsactl restore' failed with error message 'alsactl: set_control:1388: Cannot write control '2:0:0:IEC958 Playback Default:0' : Operation not permitted'... ...done. When nodm (and thus boxee) aren't running, I don't see this error but alsamixer still doesn't show the IEC channel. aplay -l gives: card 0: NVidia [HDA NVidia], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 0/1 Subdevice #0: subdevice #0 Its section in lshw reads: *-multimedia description: Audio device product: MCP79 High Definition Audio vendor: nVidia Corporation physical id: 8 bus info: pci@0000:00:08.0 version: b1 width: 32 bits clock: 66MHz capabilities: pm bus_master cap_list configuration: driver=HDA Intel latency=0 maxlatency=5 mingnt=2 resources: irq:22 memory:fae78000-fae7bfff I was running on the stock PAE kernel but now it's running on 2.6.37.1. I upgraded to see if that fixed things; it didn't. I'm considering a reinstall but I hate doing that because a) there's a bit of custom configuration in getting X and Boxee to start on boot and b) I don't know what the problem is. If I reinstall this time, I'll end up doing that every time the sound breaks. I love Ubuntu but I don't want to install it once a month. Is there any way to forcibly reset all alsa settings and restart from scratch (without doing a reinstall)? Any other tips? If you need more information, just ask.

  Read the article

• Are HDMI to VGA Adapters Really Device-Specific?

  - by allquixotic

  There are a lot of devices on the market right now (especially mobile devices) with a Micro-HDMI or Mini-HDMI port and no VGA or D-Sub output. Most manufacturers of said devices sell a cable that looks something like this: I have yet to find a cable like this that claims to work on a wide array of devices. In general, these cables claim to work with one specific device only. The way these cables work, I think, is that analog VGA signals are sent from the HDMI port on the device. This should work for devices that have special hardware on the motherboard/GPU capable of driving this. Is it the case that these cables have to be custom designed for each device? Or, is it rather that any device which possesses this special "signaling of analog VGA over the HDMI port" can be made to work with a cable that is physically compatible (i.e. the HDMI end plugs into the device and the VGA end accepts a VGA monitor cable)? Note that I am not looking for a product recommendation, just a conceptual clarification on what exactly these devices are doing. Also, a few remarks: The cables like the one depicted here are not digital to analog converters. I know about these: they are expensive, and they are the ONLY solution if your device only outputs a digital signal and is incapable of driving analog VGA over the HDMI port. The cables like the one depicted here are not straight crossover cables from VGA to HDMI, either. The crossover cables are designed to send a digital HDMI signal over the VGA port's wires; that is, the wire protocol is HDMI (digital) but the physical pinout is the same as VGA, even though nothing analog is happening. Once again, this is not the behavior that, I believe, the devices which I'm talking about in this question are doing. The cabling and devices that this question is about transmit the analog VGA data over the HDMI port (the HDMI port is in the device outputting the data, and the VGA side is the monitor/projector).

  Read the article

• no hdmi sound on Ubuntu 12.04 LTS

  - by bart

  i'm very new to ubuntu/linux. I installed Ubuntu 12.04 LTS on my vista laptop (nvidia gpu) in dual boot and with some help of google i'm almost ready to go. The only thing that i can't figure out is how to play sound trough my hdmi connected to my tv. Speakers of the laptop are ok, in te sound settings i can see -hdmi -digital -speaker outputs. The top 2 won't play sound so i googled around, found a bunch of things to try but the only thing succesfull so far was to erase all the drivers from the audio settings and they stayed gone. So finally i re-installed from scratch but still no sound trough hdmi. Re-installed 6times in the last 3 days now so the only thing left for me is reaching out for help/advice about this. How can i play sound on my tv connected with hdmi? I will be glad to give more info if needed cuz this is driving me crazy, thanks for your help in advance ! Bart.

  Read the article

• HDMI & Display Port stopped work on 11.10

  - by dizzy

  After upgraded two laptops to 11.10, HDMI and Display ports stopped to work. Symptoms on each (btw. it used to work with 11.04 on both): laptop Dell Inspiron 1525 (HDMI, Intel GMX 3100): after HDMI cable is plugged in, screen is corrupted (no panel, no icons), system is unresponsive, TV set receives some signal, but only blue screen and some regular ticks can be heard. Unplugging the cable system recovers. No logs were checked. Thinkpad W510 (DisplayPort, NVidia). Simple "Screens" utility does not recognizes TV set, but this is something to do with the differences between Nvidia driver API and the one expected from the utility, as far I could spot on the net. However, using Nvidia-settings, TV is recognized, but cannot be enabled and used. Beside that, touch pad freezes after HDMI2DisplayPort connector is plugged in the laptop (not immediately, but after few seconds - probably after some handshake with the TV set crashes). It is strange that no such bug reports can be found on the net. So, I guess it is something wrong on our laptops only, but would appreciate some hints (i.e. any known changes recently related to HDMI, Display Port, X-Windows, kernel... wherever I should take a look and fix the issue).

  Read the article

• Acer Revo (ION platform) + Maverick + 5.1 surround over HDMI

  - by Oli

  I've had a turbulent relationship with my media centre box. Every upgrade I perform on it seems to bring a brand new set of audio issues (the opposite of my desktop where things seem to get better and better). It's a Acer Revo 3600. That's basically an low-end Intel Atom chip with a Nvidia 9400M onboard. On paper that's perfect for something like a media centre. But having just upgraded to Maverick, the sound properties box only wants to offer me stereo sound over HDMI. The exact setup goes: Revo - Onkyo AV receiver - LG TV. The Onkyo box strips off the audio (supporting 7.1 -- though we're only using 6 speakers) and feeds the video onto the TV. I'd like to get to a point where Ubuntu thinks it's doing 5.1 over HDMI, upmixing stereo to 6ch and supporting DTS/AC3 (through Boxee). I've had this working before but it's frankly been a bit of a hacktastrophe. The audio chip is recognised as Nvidia MCP79/7A HDMI in alsamixer if that helps.

  Read the article

• Expensive HDMI Cables Make No Difference

  - by Jason Fitzpatrick

  While we’re no strangers to spreading the news that expensive HDMI cables are a ripoff, we’re happy to share yet another study that shows there’s zero difference between a $5 cable and a $95 one. Over at the British hardware review site Expert Reviews, they subjected a wide selection of HDMI cables to extensive tests in a bid to produce the end-all examination of whether or not a premium HDMI cable could actually produce a better signal. They used capture cards, pixel-by-pixel comparison of output, and other techniques to pick over individual frames until they ultimately reached the same conclusion everyone outside of the Monster sales staff had already reached: you’re getting absolutely no benefit to spending $100 on cable that can be had for under five bucks. Hit up the link below to read over their methodology. Expensive Cables Make Absolutely No Difference [via Geek News Central] HTG Explains: What Is RSS and How Can I Benefit From Using It? HTG Explains: Why You Only Have to Wipe a Disk Once to Erase It HTG Explains: Learn How Websites Are Tracking You Online

  Read the article

• HDMI audio output problems with Radeon card

  - by Matt Robinson

  No matter how much advice I follow, I still cannot get any audio to come out through my HDMI connection. I've tried downloading the latest proprietary FGLRX graphics drivers, and I've also gone into /etc/default/grub and altered GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" into this GRUB_CMDLINE_LINUX_DEFAULT="quiet splash radeon.audio=1" But still I cannot get any sound nor can I get HDMI sound output to show up in Sound Settings or Pulse Audio Volume Control. I can get video to show up just fine on my monitor through HDMI so I'm sure this problem is fixable! I know this is an old problem with Ubuntu, but any new strategies into the problem would be much appreciated. With that being said, here are some of my specs: Ubuntu 12.04 LTS AMD Radeon HD 7520G

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >