Search Results

Search found 64 results on 3 pages for 'hopeful'.

Page 1/3 | 1 2 3  | Next Page >

  • Releasing an open source project without getting embarrassed

    - by Hopeful
    I've been working by myself on a fairly large open source project for quite a while and it's nearing the point where I'd like to release it. However, I'm self-taught and I don't really know anyone who could adequately review my project. A few years ago, I had released a small bit of code which pretty much got ripped apart (in a critical sense) on the forum where I released it. Even though the code worked, the criticism was accurate but brutal. It prompted me to begin searching for best practices for everything and in the end I feel that it made me a much better developer. I've gone over everything in my project so many times trying to make it perfect that I've lost count. I believe in my project and think it has the potential to help a lot of people and I feel like I've done some cool things in interesting ways with it. Still, because I'm self-taught, I can't help but wonder what gaps exist in my self-education. The way my code was ripped apart last time isn't something I'd like to repeat. I think my two biggest fears with releasing my project that I've poured countless hours into are being absolutely embarrassed because I missed some patently obvious things because of my self-education or, worse, releasing it to the sound of crickets. Is there anyone who has been in a similar situation? I'm not afraid of constructive criticism, so long as it is constructive and not just a rant on how I screwed up. I know there is a code review site on StackExchange, but it's not really set up for large projects and I didn't feel like the community there is large enough yet to get good feedback if I were to post parts of my project piecemeal (I tried with one file). What can I do to give my project at least some measure of success without getting embarrassed or devestated in the process?

    Read the article

  • Working on WPF application Memory Profiling

    - by akjoshi
    Today, I am going to start with the task of memory profiling the WPF application, on which I am working from past few months. I have successfully done this in past, fixing a lot of memory leaks and improving the performance of WPF applications; As in past, I am hopeful of fixing some very interesting bugs and improve the application performance. I am very excited as current application is very different from the previous WPF applications I had profiled, all the previous application were pure WPF...(read more)

    Read the article

  • What is the best shopping cart or implementation for unlimited users posting unlimited products? [closed]

    - by Matt
    I've been working with x-cart much lately, and I was thinking about using it for a much larger site, but I don't know if it can handle what I'm looking for. I need a platform or strategy that can allow for as many users as possible where each can post multiple products (hopeful up to a hundred, but that's less important), but in their own private catalogs. So what am I looking for? With x-cart, I'm used to customizing it with jquery, smarty, and php, so I can handle that much.

    Read the article

  • Freelance composer seeking work! [closed]

    - by Ben Fowler
    Hey guys! I'm a freelance composer based in Victoria, Australia trying to break into the game industry to start my career! I've heard it said that having a plan B is planning for failure, so I've decided to go full on for what I want, so here I am! I have composed some music for other games, none of which have made it in yet (still hopeful :P) Any help on how I can break into to game industry as a composer would be MUCH appreciated!

    Read the article

  • Poor Man’s PowerShell TFS SSMS Integration

    - by merrillaldrich
    This is lame. Still, here goes: I need, increasingly, to author both PowerShell and SQL Server scripts, bundle them into a solution and store that in TFS. Usually the PowerShell scripts are very closely related to SQL Server, and have a lot of SQL in them. I am hopeful that 2012 SSDT, or the tighter integration of SSMS and Visual Studio in 2012, might help put all of this in one place, but for now I am stuck in SSMS 2008 R2. So here are my blunt attempts to marry these activities. (This post is rather...(read more)

    Read the article

  • Mouse Not Working on Boot

    - by user88043
    I have seen several topics regarding this situation, but none of them truly address my issue (that, or there are no answers that solve the issue.) Upon booting into Ubuntu 12.04.1 x64 my mouse wired USB mouse (Steelseries Sensei if that makes any difference) either doesn't work or stops working immediately after the grub menu, prior to the login screen appearing. The cursor is present, but obviously not reactive to any mouse movement; even the LED on my mouse turns off (or fails to turn on.) The only way I've found to activate the mouse is to restart the computer, and even then it's 50/50 at best as to whether or not the mouse will be powered. This issue has never happened in Windows 7, so the mouse is operating properly on the hardware and connection side. Forgive my ignorance of Ubuntu (and Linux in general), but I was hopeful that someone would have some suggestions, or could at least instruct me on what to check in order to provide any further information for diagnoses.

    Read the article

  • What is this chargeback scam from eBooks bought on my website?

    - by Dan Friedman
    We have a scammer that is buying our e-Books and then performing chargebacks. Our e-Books don't have DRM, so if they wanted to resell them, they would only need to buy each book once. But instead, they keep buying the same books over and over again and then performing hundreds of chargebacks. We have created some additional rules in our fraud protection tools to block certain aspects, even though all the info looks legit, and are hopeful this will slow them down. But my question is: What is the scam? If they aren't getting any product and they only get chargebacks for something they already purchased, then they can't get additional money from the credit card company, so then what's their motivation?

    Read the article

  • What is this chargeback scam? [on hold]

    - by Dan Friedman
    We have a scammer that is buying our e-Books and then performing chargebacks. Our e-Books don't have DRM, so if they wanted to resell them, they would only need to buy each book once. But instead, they keep buying the same books over and over again and then performing hundreds of chargebacks. We have created some additional rules in our fraud protection tools to block certain aspects, even though all the info looks legit, and are hopeful this will slow them down. But my question is: What is the scam? If they aren't getting any product and they only get chargebacks for something they already purchased, then they can't get additional money from the credit card company, so then what's their motivation?

    Read the article

  • Disabled WiFi but it keeps re-enabling itself; want it to stay disabled

    - by Mike Uresti
    I have an Alienware X51 desktop with a wireless card, I have it connected via ethernet and want to permanently disable WiFi from ever using itself. When running Windows, I go to device manager and rightclick-disable the Wireless card and that takes care of my problem. Is there a similar method using Ubuntu 14.04? For now, I click on the network icon in the system tray and uncheck 'Enable wifi' but it seems to turn itself back on as I use my computer, I think I have the incident isolated to something with Steam. It seems like after I start the Steam client it always is re-enabled. Hopeful answer: Just disable/remove/block wireless card from ever working.

    Read the article

  • System locks up at login after latest update on 12.04

    - by RCD
    For starters, I am a noob when it comes to Ubuntu and Linux...but I am hopeful that I have the "light" and the error of my past MS ways :) ..... After a recent update last week from 12.04 to 12.04.1 my system now locks up at the login screen. Before the update the system would run but must admit it ran EXTREMELY slow. I have installed 12.04 on a Dell P4 2.4 Ghz, 2 GB DDR Ram, 80 GB IDE HD and an integrated Intel 3D Extreme Graphics. Any ideas on why now the system locking up at login screen? Appreciate any ideas and/or tips Thanks

    Read the article

  • Ubuntu 14.04 + nvidia-331-updates makes a blank desktop screen

    - by Achint
    I upgraded my installation from 13.10 to 14.04. The problem is that whenever I install the Nvidia drivers from the GUI, upon reboot or trying to login again it only shows the wallpaper of my desktop and nothing else. The mouse does move around, but nothing works. I am unable to open a terminal or do anything else. If I go into the tty console and purge the drivers, then things seem to work again. I have an Optimus setup, with an onboard Intel and discrete Nvidia GTX770M card. It's a 64-bit architecture. I really need to work with CUDA, and was hopeful after hearing that nvidia-prime was released, but this is a real downer. Any help on this?

    Read the article

  • Java: Possible to consolidate empty subdirectories for packages that only contain other packages?

    - by BinaryMuse
    Good afternoon, all. I'm not too hopeful for a "yes" here, but if anyone can figure it out, the folks at SO can. I have a Java project that has the following package structure: src |-net | |-binarymuse | |-gwt | |-client | | |-ui | | |-project | | |-Project.java | |-Project.gwt.xml |-overview.html I would like to consolidate the empty subdirectories in the src/ folder so that instead of /src/net/binarymuse/gwt/client/ui/project/ I'd have /src/net.binarymuse.gwt/client.ui.project/. Is this possible? Thanks.

    Read the article

  • Django Currency Conversion

    - by Koobz
    Is there any facility in Django for doing currency conversions? Obviously, rates change day by day but I'm somewhat hopeful that the locale module has some sort of web-service based converter :P There's a snippet here that handles the formatting: http://www.djangosnippets.org/snippets/552/ But I need to localize the values first.

    Read the article

  • Resources for learning about Threading

    - by Incubuss
    I've spent the last year learning and using Java in university but we didn't do much (read: anything) in terms of Threading. We do some next year but I'm hopeful I'll be able to get a head start over the summer. What are the best resources for learning about and getting to grips with Threading?

    Read the article

  • Network / Internet diagnostic tool to locate an error?

    - by Jesper
    Hi, I’m facing some difficulties with the Internet / network at my work and I have trouble locating the precise error and when and how it occurs. The problem is that the client machines in the house sporadic is disconnected to the Internet. I’m some what new so I haven’t that much inside in the network and apparently neither has my predecessor. What I am requesting and hoping you guys knows about is, if there exist some kind of network monitor tool I can install and run and it will periodically check the network, the Internet connection etc. and record to logs. Then, if there suddenly arises a problem some time of the day in some part of the network or the Internet connection, I can check it perhaps the next day. I’ve just downloaded and installed Microsoft Network Monitor 3.3 application and hopeful it can give me some answers on where the instability is located but I still would like a tool to make different checks and test in some time interval. Do anyone know about such a program or another kind of performance / diagnostic tool / method I can use? Sincere Jesper

    Read the article

  • Media Player Classic creating folder

    - by radiok
    Whenever I open a file in Media Player Classic it creates a new folder "Media Player Classic" under the folder of the file I opened. Originally it was putting a playlist in that folder, "default.mpcpl", but I found that if you open the playlist (Ctrl+7) and right-click the playlist, there is an option "Remember items", unchecking that will prevent MPC from creating this playlist. I was hopeful that without the auto-generated playlist MPC would have no reason to create the folder. Wrong. Now the folder is empty, but I still have to follow MPC around deleting all these blank folders. I use Media Player Classic on several of my computers so I think I just screwed up some variable somewhere somehow regarding where it stores playlists or something, but I can't figure out what it is, I've tried uninstalling and reinstalling to little avail. Which makes me think it might be in the registry. Does anyone have any ideas?

    Read the article

  • Very Hot P4 3.4 GHz

    - by Timothy R. Butler
    My Pentium 4 3.4 GHz is running hot even with a new fan on my case's heatsink (80mm rated at ~ 40 CFM). If I stress the CPU, it goes over Intel's maximum temperature rating. I'm contemplating putting in a "PCI cooler" (i.e. a fan that fits into an empty PCI slot) to see if I could get better airflow in the case. The slot isn't far from the processor and heatpipes that lead from the processor to the fan, so I'm hopeful this would help, but not entirely certain. Thoughts?

    Read the article

  • What to do with old hard drives?

    - by caliban
    I have over 100+ old hard drives, ranging from 100MB Quantums to 200GB WDs, most of them PATA, some SATA. Most still working. The squirrel mentality runs in my family - hoard everything, discard nothing. Thus, and this is a relevant question - any suggestions on how to put these drives to use (anything) instead of them just being deadweights and space takers around the office? Hopeful objectives and suggestions to keep in mind when you post an answer : Should showcase your geekiness, or plain fun, or serve a social purpose, or benefit the community. You do not need to limit your answer to only one hard drive - if your project needs all 100++, bring it on! Your answer need not be limited to one project per hard drive - if one hard drive can be used for multiple projects, bring it on! If additional accessories need be purchased, make sure they are common. Don't tell me to get a moon rock or something. The projects you suggested should serve a utility, and not just for decoration purposes.

    Read the article

  • My New Job

    - by Stuart Brierley
    Last year I started a new job with a logistics company in the North of England, where I was responsible for the management, design and development of IT Integration strategies, architectures and solutions using BizTalk Server 2009.  This included the design and implementation of the BizTalk Server 2009 infrastructure, the definition of development standards, mentoring a fellow developer in the ways of BizTalk and migrating a number of existing solutions from Softshare over to BizTalk 2009. Unfortunately I then realised that, following this initial set up, there didn't actually seem to be that much BizTalk work for me to get stuck into and reluctantly I have now moved on from this role to a very similar role with the country's largest office supplies company.  Based in Sheffield, we distribute office supplies on a UK wide basis and computer supplies across Europe. The situation here is slightly different than when I first joined my previous employer.  Whereas that was a green field installation with no previous BizTalk solutions in place, my new employer currently has a number of live BizTalk 2000 (!) and BizTalk 2006 solutions in place.  Unfortunately the infrastructure around these is less than ideal; with no clear distinction between development and test environments and no source control what so ever! We are currently building a proposal for a new BizTalk Server 2010 implementation, where I am hopeful of being able to implement fully independent development, test and pseudo-live environments, alongside an enterprise level live installation.  We should also be introducing Team Foundation Server to the development process, thereby giving us some much needed source control capabilities. Following this is likely to be a period of migration for the existing BizTalk Solutions, along with the onward development of new projects and initiatives - I'm hoping to be a busy man for the forseeable future :o)

    Read the article

  • SPUtility.SendMail and the 2048 Character Limit

    - by Damon
    We were in the middle of testing a web part responsible for gathering information from visitors to our Client's website and emailing it to someone responsible for responding to the request.  During testing, however, it was brought to our attention that the message was cutting off at 2048 characters.  Now, 2048 is one of those numbers that is usually indicative of some computational limit, but I was hopeful that Microsoft had thought through the possibility of emailing more than 2048 characters from SharePoint.  Luckily I was right. and wrong. As it turns out, SPUtility.SendMail is not limited to any specific character limit as far as I can tell.  However, each LINE of text that you send via SendMail cannot exceed 2048 characters.  Since we were sending an HTML email it was constructed entirely without line breaks, far exceeding the 2048 character limit and ultimately helping to educate me about this obscure technical limitation whose only benefit thus far is offering me something to rant about on my blog.  The fix is simple, just put in a carriage return and a line break often enough to avoid going past the 2048 character limit.  I'm sure someone can present a great technical reason for the 2048 character limit, but it seems fairly arbitrary since the "\r\n" that got appended to the string are ultimately just characters too.

    Read the article

  • Should we choose Java over C# or we should consider using Mono?

    - by A. Karimi
    We are a small team of independent developers with an average experience of 7 years in C#/.NET platform. We almost work on small to average web application projects that allows us to choose our favorite platform. I believe that our current platform (C#/.NET) allows us to be more productive than if we were working in Java but what makes me think about choosing Java over C# is the costs and the community (of the open source). Our projects allow us even work with various frameworks as well as various platforms. For example we can even use Nancy. So we are able to decrease the costs by using Mono which can be deployed on Linux servers. But I'm looking for a complete ecosystem (IDE/Platform/Production Environment) that decreases our costs and makes us feel completely supported by the community. As an example of issues I've experienced with MonoDevelop, I can refer to the poor support of the Razor syntax on MonoDevelop. As another example, We are using "VS 2012 Express for Web" as our IDE to decrease the costs but as you know it doesn't support plugins and I have serious problems with XML comments (I missed GhostDoc). We strongly believe in strongly-typed programming languages so please don't offer the other languages and platforms such as Ruby, PHP, etc. Now I want to choose between: Keep going on C#, buy some products and be hopeful about openness of .NET ecosystem and its open source community. Changing the platform and start using the Java open source ecosystem

    Read the article

  • Resize a pendrive Linux?

    - by user11239
    I'm running Ubuntu from USB media, which has a drive capacity of 250 GB, all existing as one FAT32 partition. However, when I created the bootable Ubuntu drive, only 4.79 GB were allocated for usage. Rather than put files directly into the /cdrom where the drive is mounted, I want to expand what is listed here in aufs to be at least 200 GB. I'm hopeful that I can do this live. Output of df : Filesystem 1K-blocks Used Available Use% Mounted on aufs 4051904 4050108 0 100% / none 1542852 284 1542568 1% /dev /dev/sdb1 244076800 4901648 239175152 3% /cdrom /dev/loop0 688000 688000 0 100% /rofs none 1547840 1496 1546344 1% /dev/shm tmpfs 1547840 4828 1543012 1% /tmp none 1547840 80 1547760 1% /var/run none 1547840 0 1547840 0% /var/lock none 1547840 0 1547840 0% /lib/init/rw Output of fdisk -l : Disk /dev/sdb: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00083fe4 Device Boot Start End Blocks Id System /dev/sdb1 * 1 30401 244196001 c W95 FAT32 (LBA) So basically what I want to do is get /dev/sdb1 to be entirely, or almost entirely read as aufs. I'm confused over how to do this, as the file systems are all part of /dev/sdb1 on one big partition, rather than separate partitions for separate file systems.

    Read the article

  • How can I get SLI working with 295.40?

    - by Steve
    I've been doing a lot of googling these last few hours and I'm not having much luck. Perhaps I don't know exactly what I am looking for. I just recently installed Ubuntu 12.04LTS x86_64. Looks beautiful! I have two GTX470's in SLI, and I am finally migrating my desktop over given the hopeful gaming support as of late. My laptop has been enjoying multiple distros of Ubuntu for a couple years now. However, new problems come with unexplored territory, here. At first, I only had one working monitor of my two. Over on nvidia-xconfig I fixed that, but the only solution that actually worked was twinview. Just recently I read here that twinview is not compatible with SLI. Sweet. When I try to tell it, oh hey, use a separate XScreen, configure it the way I want it, click save to configuration file, enter my password, then a sudo restart lightdm, it's broken. One screen blacks or whites out (Couldn't tell you the specific conditions for each, I'm dubious at this point,) and I get this huge error dialogue box upon login. Something about incompatible resolutions if I remember right. Though I am sure I set the resolutions for each screen correctly. Anyway, when I try to enable SLI (sudo nvidia-xconfig --sli=On) despite the fact it hates twinview, unity breaks. The sidebar is there, but only one screen works, the mouse is trapped running along the left edge of it, and the background of the sidebar is a solid blue. Anyway, this ended up being entirely too verbose, I'm sorry, but could anyone part some wisdom please? It would be appreciated!

    Read the article

  • Should I redo an abandoned project with Lightswitch?

    - by Elson
    I had a small project that I was doing on the side. It was basically a couple of forms linked to a DB. Access was out, because it was a specifically meant to be a web application. Being a small project I used ASP.NET Dynamic Data, but, for various reasons, the project ended before deployment. I met the client recently, and he said there was a need for it still. I'm considering restarting the project with Dynamic Data, but I've seen some Lightswitch demos, and was suitably impressed with the BETA. I will wait for RTM if I use it, but is it a good idea to use Lightswitch to replace the Dyanmic Data? The amount of work I put into the Dynamic Data site isn't really an issue. Additional information: It's a system that tracks production in a small factory, broken down by line, machine, section and will generate reports. I would guess that the data structure will remain fairly constant over time, but that the reporting requirements will grow. The other thing is that the factory is part of a larger group, and I'm hopeful that, if this system succeeds, similar work with be forthcoming for other factories.

    Read the article

  • Interesting fault attempting to install Ubuntu 12.0.4.3 OR 13.10 on MSI GS70 2OD-001US

    - by cjaredrun
    Attempting to install Ubuntu on an MSI GS70 2OD-001US notebook pre-installed with Windows 8. For the record this is what I have attempted: All cases were attempted with Ubuntu 12.0.4.3 AND 13.10 images via USB drives Case 1 - Attempt no changes and simply boot from USB Result: It seems to want to work initially. The Ubuntu logo pops up and the dots start moving. After a few seconds the dots freeze and this screen is shown: http://i.imgur.com/C7pyMRk.jpg Case 2 - Start playing with BIOS - In Windows turning off fast boot - In BIOS turning off Secure boot - In BIOS turning off UEFI and selecting LEGACY Result: Brought to a black screen with a - blinking at me. Case 3 - Alternating BIOS settings - In Windows turning off fast boot - In BIOS turning off Secure boot - in BIOS turning off UEFI and selecting UEFI with CSM Result: Brought to a black screen no other indication of change. It's pretty frustrating to feel locked out of a laptop that I have paid good money for, I'm sure I am not alone in that case. It does however appear that there has been some success, so I am hopeful that someone might be able to help me. FYI: Dual booting is not necessary for me, if that helps at all... I'm not sure if this is a reasonable option, but if I completely wipe clean the hdds, no particle of Windows at all, would this still be a problem? Also would opening up the laptop and replacing the HDDS with brand new ones be a solution as well? Thanks for any input or suggestions.

    Read the article

1 2 3  | Next Page >