Search Results

Search found 58 results on 3 pages for 'hristo hristov'.

Page 1/3 | 1 2 3  | Next Page >

• socket problem with MySQL

  - by Hristo

  This is a recent problem... MySQL was working and a couple of days ago I must have done something. I deleted MySQL and tried reinstalling using the .dmg file. The mysql.sock file never gets created and I get the following error messages: Hristo$ mysql Enter password: ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/mysql/mysql.sock' (2) I also tried stopping Apache and installing but Apache gave me an error... I don't know if this is good or bad: Hristo$ sudo apachectl stop launchctl: Error unloading: org.apache.httpd I tried the MacPorts installation as well but the socket file still didn't get created. I don't really know what to do and I don't want to reinstall Snow Leopard and start from scratch :/ I also tried installing the 32-bit version and same deal. No luck. Finally... I tried doing the source installation but when I get to the configuration step, I get the following error: -bash: ./configure: No such file or directory The file is "mysql-5.1.47-osx10.6-x86_64.tar.gz" so I think it is the proper file for source installation and yes I have a 64 bit system. I don't know what to do anymore. Any ideas? Thanks, Hristo

  Read the article

• mysql.sock doesn't get installed after mysql installation on snow leopard

  - by Hristo

  This is a recent problem... MySQL was working and a couple of days ago I must have done something. I deleted MySQL and tried reinstalling using the .dmg file. The mysql.sock file never gets created and I get the following error messages: Hristo$ mysql Enter password: ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/mysql/mysql.sock' (2) I also tried stopping Apache and installing but Apache gave me an error... I don't know if this is good or bad: Hristo$ sudo apachectl stop launchctl: Error unloading: org.apache.httpd I tried the MacPorts installation as well but the socket file still didn't get created. I don't really know what to do and I don't want to reinstall Snow Leopard and start from scratch :/ Any ideas? Thanks, Hristo

  Read the article

• mysql.sock file missing after installing MySQL on Snow Leopard

  - by Hristo

  This is a recent problem... MySQL was working and a couple of days ago I must have done something. I deleted MySQL and tried reinstalling using the .dmg file. The mysql.sock file never gets created and I get the following error messages: Hristo$ mysql Enter password: ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/mysql/mysql.sock' (2) I also tried stopping Apache and installing but Apache gave me an error... I don't know if this is good or bad: Hristo$ sudo apachectl stop launchctl: Error unloading: org.apache.httpd I tried the MacPorts installation as well but the socket file still didn't get created. I don't really know what to do and I don't want to reinstall Snow Leopard and start from scratch :/ I also tried installing the 32-bit version and same deal. No luck. Any ideas? Thanks, Hristo

  Read the article

• socket problem with MySQL

  - by Hristo

  This is a recent problem... MySQL was working and a couple of days ago I must have done something. I deleted MySQL and tried reinstalling using the .dmg file. The mysql.sock file never gets created and I get the following error messages: Hristo$ mysql Enter password: ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/mysql/mysql.sock' (2) I also tried stopping Apache and installing but Apache gave me an error... I don't know if this is good or bad: Hristo$ sudo apachectl stop launchctl: Error unloading: org.apache.httpd I tried the MacPorts installation as well but the socket file still didn't get created. I don't really know what to do and I don't want to reinstall Snow Leopard and start from scratch :/ I also tried installing the 32-bit version and same deal. No luck. Finally... I tried doing the source installation but when I get to the configuration step, I get the following error: -bash: ./configure: No such file or directory The file is "mysql-5.1.47-osx10.6-x86_64.tar.gz" so I think it is the proper file for source installation and yes I have a 64 bit system. I don't know what to do anymore. Any ideas? Thanks, Hristo

  Read the article

• problems with Apache on Snow Leopard

  - by Hristo

  I kind of screwed up the Apache "stuff" on my Mac. Usually when I visit http://localhost/, I would see the "It Works!" but now it just lists the directory and files inside /Library/WebServer/Documents. When I try to stop/start/restart the server with sudo apachectl stop, I get: httpd: Syntax error on line 68 of /etc/apache2/httpd.conf: Cannot load /usr/libexec/apache2/mod_disk_cache.so into server: dlopen(/usr/libexec/apache2/mod_disk_cache.so, 10): Symbol not found: _apr_file_info_get$INODE64\n Referenced from: /usr/libexec/apache2/mod_disk_cache.so\n Expected in: flat namespace\n in /usr/libexec/apache2/mod_disk_cache.so I don't want to do the MacPorts install, I tried it earlier but... I just want to do it via source code with the usual ./configure, make, make install. Any ideas on how to get this working? Is there a way to totally remove Apache and then reinstall a fresh version? Thanks, Hristo

  Read the article

• problems with Apache on Snow Leopard

  - by Hristo

  I kind of screwed up the Apache "stuff" on my Mac. Usually when I visit http://localhost/, I would see the "It Works!" but now it just lists the directory and files inside /Library/WebServer/Documents. When I try to stop/start/restart the server with sudo apachectl stop, I get: httpd: Syntax error on line 68 of /etc/apache2/httpd.conf: Cannot load /usr/libexec/apache2/mod_disk_cache.so into server: dlopen(/usr/libexec/apache2/mod_disk_cache.so, 10): Symbol not found: _apr_file_info_get$INODE64\n Referenced from: /usr/libexec/apache2/mod_disk_cache.so\n Expected in: flat namespace\n in /usr/libexec/apache2/mod_disk_cache.so I don't want to do the MacPorts install, I tried it earlier but... I just want to do it via source code with the usual ./configure, make, make install. Any ideas on how to get this working? Is there a way to totally remove Apache and then reinstall a fresh version? Thanks, Hristo

  Read the article

• MIPS $gp register

  - by Hristo

  Is there a danger in using the $gp register to store a value? I guess my question is what is the true functionality of $gp and is it invoked behind-the-scenes somehow so that if I were to use it, things could go very very wrong? Thanks, Hristo

  Read the article

• determine pid of terminated process

  - by Hristo

  I'm trying to figure out what the pid is of a process that sent the SIGCHLD signal, and I want to do this in a signal handler I created for SIGCHLD. How would I do this? I'm trying: int pid = waitpid(-1, NULL, WNOHANG); .. because I want to wait for any child process that is spawned. Thanks, Hristo

  Read the article

• I need to move an entity to the mouse location after i rightclick

  - by I.Hristov

  Well I've read the related questions-answers but still cant find a way to move my champion to the mouse position after a right-button mouse-click. I use this code at the top: float speed = (float)1/3; And this is in my void Update: //check if right mouse button is clicked if (mouse.RightButton == ButtonState.Released && previousButtonState == ButtonState.Pressed) { // gets the position of the mouse in mousePosition mousePosition = new Vector2(mouse.X, mouse.Y); //gets the current position of champion (the drawRectangle) currentChampionPosition = new Vector2(drawRectangle.X, drawRectangle.Y); // move champion to mouse position: //handles the case when the mouse position is really close to current position if (Math.Abs(currentChampionPosition.X - mousePosition.X) <= speed && Math.Abs(currentChampionPosition.Y - mousePosition.Y) <= speed) { drawRectangle.X = (int)mousePosition.X; drawRectangle.Y = (int)mousePosition.Y; } else if (currentChampionPosition != mousePosition) { drawRectangle.X += (int)((mousePosition.X - currentChampionPosition.X) * speed); drawRectangle.Y += (int)((mousePosition.Y - currentChampionPosition.Y) * speed); } } previousButtonState = mouse.RightButton; What that code does at the moment is on a click it brings the sprite 1/3 of the distance to the mouse but only once. How do I make it move consistently all the time? It seems I am not updating the sprite at all. EDIT I added the Vector2 as Nick said and with speed changed to 50 it should be OK. I tried it with if ButtonState.Pressed and it works while pressing the button. Thanks. However I wanted it to start moving when single mouse clicked. It should be moving until reaches the mousePosition. The Edit of Nick's post says to create another Vector2, But I already have the one called mousePosition. Not sure how to use another one. //gets a Vector2 direction to move *by Nick Wilson Vector2 direction = mousePosition - currentChampionPosition; //make the direction vector a unit vector direction.Normalize(); //multiply with speed (number of pixels) direction *= speed; // move champion to mouse position if (currentChampionPosition != mousePosition) { drawRectangle.X += (int)(direction.X); drawRectangle.Y += (int)(direction.Y); } } previousButtonState = mouse.RightButton;

  Read the article

• Why are there different programming languages [closed]

  - by Velizar Hristov

  I'm not asking about the usefulness of the languages that do exist already: I already know, and agree, that different languages are better for different purposes. However, why don't they just have a single language that can do it all? Why, when C# was created, they didn't keep everything from C and C++ and just add a few things, so that it can be used as both a low-level and high-level language? I see no harm in adding all kinds of commands to a single language that would allow it to be good for everything, and even eliminate the need for all other languages. Someone from another thread said that if there's a flaw in a certain language, its successor might not have it. However, why don't we just update that language to remove the flaw, and/or add anything that's missing? Arrays are different in Java and C#, but why not have them both, just use different commands for them? And so on...

  Read the article

• Creating shooting arrow class [on hold]

  - by I.Hristov

  OK I am trying to write an XNA game with one controllable by the player entity, while the rest are bots (enemy and friendly) wondering around and... shooting each other from range. Now the shooting I suppose should be done with a separate class Arrow (for example). The resulting object would be the arrow appearing on screen moving from shooting entity to target entity. When target is reached arrow is no longer active, probably removed from the list. I plan to make a class with fields: Vector2 shootingEntity; Vector2 targetEntity; float arrowSpeed; float arrowAttackSpeed; int damageDone; bool isActive; Then when enemy entities get closer than a int rangeToShoot (which each entity will have as a field/prop) I plan to make a list of arrows emerging from each entity and going to the closest opposite one. I wonder if that logic will enable me later to make possible many entities to be able to shoot independently at different enemy entities at the same time. I know the question is broad but it would be wise to ask if the foundations of the idea are correct.

  Read the article

• How much do they study in the best universities, relative to the other universities?

  - by Velizar Hristov

  In my university, our total required weekly attendance (for lectures and tutorials/similar) is about 12 hours. It was like that in the first year, and then everything required extremely little effort - I believe that if I invested as much efforts as someone who is studying for medicine or law, I could have learnt everything for 1-2 months - if not less! Now I'm second year and it doesn't look like it's going to be too different. This concerns me about the people who study in Oxford, Cambridge or Imperial College. It would be weird if they study that little, and it would be very concerning if they do study very hard, because this would mean that by the end of the year, their first year students will be better than our average third year student. Which is bad news for me, given that I share the market with them. I know the question can't have an absolutely accurate answer, but it can still be answered quite definitely, and it's relevant to many people.

  Read the article

• determine if parity bit representation in MIPS

  - by Hristo

  Is there some instruction in MIPS that will determine the parity of a certain bit representation? I know to determine whether a "number" has an even parity or an odd parity is to XOR the individual bits of the binary representation together, but that seems computationally-intensive for a set of MIPS instructions... and I need to do this as quick as possible. Also, the number I'm working in is represented in Grey Code... just to throw that in there. So is there some pseudo-instruction in MIPS to determine the parity of a "number" or do I have to do it by hand? Thanks, Hristo

  Read the article

• string replace in file using C

  - by Hristo

  I haven't yet implemented this, I'm still in the thinking stage, but I have to go through a file and replace a certain string with another string. For example, <img src="/images/logo.gif" ... should become <img src="/proxy/www.example.com/images/logo.gif" ... Any advice on how I can approach this? Perhaps there exist some "string replace" C functions that would do this for me that I don't know about...? Right now, if I had to write this function myself, I would give it as parameters the file, string to replace, replacement string. Then I would manually go through the file and look for an occurrence of the string and recreate it. This, however, seems very inefficient. Are there better ways to do this? Thanks, Hristo

  Read the article

• segfault during fclose()

  - by Hristo

  fclose() is causing a segfault. I have : char buffer[L_tmpnam]; char *pipeName = tmpnam(buffer); FILE *pipeFD = fopen(pipeName, "w"); // open for writing ... ... ... fclose(pipeFD); I don't do any file related stuff in the ... yet so that doesn't affect it. However, my MAIN process communicates with another process through shared memory where pipeName is stored; the other process fopen's this pipe for reading to communicated with MAIN. Any ideas why this is causing a segfault? Thanks, Hristo

  Read the article

• create a list of threads in C

  - by Hristo

  My implementation (in C) isn't working... the first node is always NULL so I can't free the memory. I'm doing: thread_node_t *thread_list_head = NULL; // done in the beginning of the program ... // later on in the program thread_node_t *thread = (thread_node_t*) malloc(sizeof(thread_node_t)); pthread_create(&(thread->thread), NULL, client_thread, &csFD); thread->next = thread_list_head; thread_list_head = thread; So when I try to free this memory, thread_list_head is NULL. while (thread_list_head != NULL) { thread_node_t *temp = thread_list_head; thread_list_head = thread_list_head->next; free(temp); temp = NULL; } Any advice on how to fix this or just a new way to create this list that would work better? Thanks, Hristo

  Read the article

• realloc()ing memory for a buffer used in recv()

  - by Hristo

  I need to recv() data from a socket and store it into a buffer, but I need to make sure get all of the data so I have things in a loop. So to makes sure I don't run out of room in my buffer, I'm trying to use realloc to resize the memory allocated to the buffer. So far I have: // receive response int i = 0; int amntRecvd = 0; char *pageContentBuffer = (char*) malloc(4096 * sizeof(char)); while ((amntRecvd = recv(proxySocketFD, pageContentBuffer + i, 4096, 0)) > 0) { i += amntRecvd; realloc(pageContentBuffer, 4096 + sizeof(pageContentBuffer)); } However, this doesn't seem to be working properly since Valgrind is complaining "valgrind: the 'impossible' happened:". Any advice as to how this should be done properly? Thanks, Hristo

  Read the article

• running a program in Unix vs in Windows

  - by Hristo

  I'm compiling a simple program written in C and I'm using Eclipse as an IDE, both in Windows 7 and on my MacBook Pro. Very simple program my friend wrote and asked me to help him with: int a = 0; char b[2]; printf("Input first class info:\n"); printf("Credit Hours: \n"); scanf("%d", &a); printf("Letter Grade: "); scanf("%s", b); So when I run this on my mac, each line prints and when I encounter the scanf(), I can input and continue as expected. In Windows, I have to input everything and then it will print all the lines. I'm not sure why this is happening... what is the difference b/w Windows and Mac here? Mac: Input first class info: Credit Hours: 4 Letter Grade: B+ Windows: 4 B+ Input first class info: Credit Hours: Letter Grade: Thanks, Hristo

  Read the article

• get value from MySQL database with PHP

  - by Hristo

  $from = $_POST['from']; $to = $_POST['to']; $message = $_POST['message']; $query = "SELECT * FROM Users WHERE `user_name` = '$from' LIMIT 1"; $result = mysql_query($query); while($row = mysql_fetch_array($result, MYSQL_ASSOC)) { $fromID = $row['user_id']; } I'm trying to have $formID be the user_id for a user in my database. Each row in the Users table is like: user_id | user_name | user_type 1 | Hristo | Agent So I want $from = 1 but the above code isn't working. Any ideas why?

  Read the article

• prevent race condition without using locks C++

  - by Hristo

  How do I prevent a race condition with locking or using mutexes/semaphors in C++? I'm dealing with a nested for loop in which I will be setting a value in an array: for (int i = 0; i < m; ++i) for (int j = 0; j < n; ++j) for (int k = 0; k < o; ++k) array[k] += foo(...); More or less, I want to deal with this so that I can ensure different threads running at the same time don't write to array[k] at the same time. Any suggestions on how to approach this? Thanks, Hristo

  Read the article

• determine parity of a bit representation of a number in MIPS

  - by Hristo

  Is there some instruction in MIPS that will determine the parity of a certain bit representation? I know to determine whether a "number" has an even parity or an odd parity is to XOR the individual bits of the binary representation together, but that seems computationally-intensive for a set of MIPS instructions... and I need to do this as quick as possible. Also, the number I'm working in is represented in Grey Code... just to throw that in there. So is there some pseudo-instruction in MIPS to determine the parity of a "number" or do I have to do it by hand? If there is no MIPS instruction, which it seems very unlikely to be, any advice on how to do it by hand? Thanks, Hristo follow-up: I found a optimization, but my implementation isn't working. unsigned int v; // 32-bit word v ^= v >> 1; v ^= v >> 2; v = (v & 0x11111111U) * 0x11111111U; return (v >> 28) & 1;

  Read the article

• how to implement intel's tbb::blocked_range2d in C++

  - by Hristo

  I'm trying to parallelize nested for loops with parellel_for() and the blocked_range2d from Intel's TBB using C++. The for loops look like this: for(int i = 0; i < N; ++i) { for(int j = 0; j < E[i]; ++j) { for(int k = 0; k < T; ++k) { score[k] += delta(i, trRating[k][i], exRating[j][i]); } } } ... and I am trying to do the following: class LoopBody { private: int *myscore; public: LoopBody(int *score) { myscore = score; } void operator()(const blocked_range2d<int> &r) const { for(int i = r.rows().begin(); i != r.rows().end(); ++i); for(int j = 0; j < E[i]; ++j) { for(int k = r.cols().begin(); k != r.cols().end(); ++k) { myscore[k] += foo(...); // uses i,j,k to look up indices in arrays } } } } }; void computeScores(int score[]) { parallel_for(blocked_range2d<int>(0, N, 0, T), LoopBody(score)); } ... but I am getting the following compile errors: error: identifier "i" is undefined for(int j = 0; j < E[i]; ++j) { ^ error: expected an identifier }; ^ I'm not really sure if I am doing this the right way, but any advice is appreciated. Also, this is my first time using Intel's TBB so I really don't know anything about it. Any ideas how make this work? Thanks, Hristo

  Read the article

• floating exception using icc compiler

  - by Hristo

  I'm compiling my code via the following command: icc -ltbb test.cxx -o test Then when I run the program: time ./mp6 100 > output.modified Floating exception 4.871u 0.405s 0:05.28 99.8% 0+0k 0+0io 0pf+0w I get a "Floating exception". This following is code in C++ that I had before the exception and after: // before if (j < E[i]) { temp += foo(0, trr[i], ex[i+j*N]); } // after temp += (j < E[i])*foo(0, trr[i], ex[i+j*N]); This is boolean algebra... so (j < E[i]) is either going to be a 0 or a 1 so the multiplication would result either in 0 or the foo() result. I don't see why this would cause a floating exception. This is what foo() does: int foo(int s, int t, int e) { switch(s % 4) { case 0: return abs(t - e)/e; case 1: return (t == e) ? 0 : 1; case 2: return (t < e) ? 5 : (t - e)/t; case 3: return abs(t - e)/t; } return 0; } foo() isn't a function I wrote so I'm not too sure as to what it does... but I don't think the problem is with the function foo(). Is there something about boolean algebra that I don't understand or something that works differently in C++ than I know of? Any ideas why this causes an exception? Thanks, Hristo

  Read the article

• array of structs in C

  - by Hristo

  I'm trying to create an array of structs and also a pointer to that array. I don't know how large the array is going to be, so it should be dynamic. My struct would look something like this: typedef struct _stats_t { int hours[24]; int numPostsInHour; int days[7]; int numPostsInDay; int weeks[20]; int numPostsInWeek; int totNumLinesInPosts; int numPostsAnalyzed; } stats_t; ... and I need to have multiple of these structs for each file (unknown amount) that I will analyze. I'm not sure how to do this. I don't like the following approach because of the limit of the size of the array: # define MAX 10 typedef struct _stats_t { int hours[24]; int numPostsInHour; int days[7]; int numPostsInDay; int weeks[20]; int numPostsInWeek; int totNumLinesInPosts; int numPostsAnalyzed; } stats_t[MAX]; So how would I create this array? Also, would a pointer to this array would look something this? stats_t stats[]; stats_t *statsPtr = &stats[0]; Thanks, Hristo

  Read the article

• implement SIMD in C++

  - by Hristo

  I'm working on a bit of code and I'm trying to optimize it as much as possible, basically get it running under a certain time limit. The following makes the call... static affinity_partitioner ap; parallel_for(blocked_range<size_t>(0, T), LoopBody(score), ap); ... and the following is what is executed. void operator()(const blocked_range<size_t> &r) const { int temp; int i; int j; size_t k; size_t begin = r.begin(); size_t end = r.end(); for(k = begin; k != end; ++k) { // for each trainee temp = 0; for(i = 0; i < N; ++i) { // for each sample int trr = trRating[k][i]; int ei = E[i]; for(j = 0; j < ei; ++j) { // for each expert temp += delta(i, trr, exRating[j][i]); } } myscore[k] = temp; } } I'm using Intel's TBB to optimize this. But I've also been reading about SIMD and SSE2 and things along that nature. So my question is, how do I store the variables (i,j,k) in registers so that they can be accessed faster by the CPU? I think the answer has to do with implementing SSE2 or some variation of it, but I have no idea how to do that. Any ideas? Thanks, Hristo

  Read the article

1 2 3  | Next Page >