Search Results

Search found 15 results on 1 pages for 'imm'.

Page 1/1 | 1 

  • Communicating via Command Mode with IBM HS22 IMM via AMM

    - by MikeyB
    On previous model blades that contained a BMC, I was able to communicate from our external management station via pass-through commands to the BMC to do things such as power blades on/off, set VPD parameters, reboot the BMC, etc. Now on the HS22, a bunch of things happen differently. For example, we can no longer use the same pass-through commands to write VPD information pages and have them persist across reboots of the IMM - it looks as though those VPD pages are populated from information contained in the IMM. How do we use the Advanced Settings Utility from an external host to communicate with HS22 IMMs? Alternatively, what TCP Command Mode commands do we need to send to the AMM to communicate with the IMM? For our purposes, we specifically cannot communicate with the IMM from the blade itself. Specific example: When I send a pass-thru IPMI command via the AMM to the blade BMC to write information (such as MTM, Serial) into VPD page 0x10, it persists on blades with a BMC (HS21 for example). I can send the same IPMI command to write data to the VPD page on the HS22, however it does not persist across reboots of the IMM. What IPMI commands do I need to send to the IMM? What IPMI commands are asu sending when it sets the MTM & Serial?

    Read the article

  • How to modify IMM password from the default one?

    - by evachristine
    We cannot modify the default USERID/PASSW0RD on an IMM because when we try it modify the USERID's password with a logged in USERID user (that has the "max" rights) we get this message after clicking on "SAVE" (save the new password..) Could not modify password: *** Provider OSBase_AccountProvider(21770) exiting due to a SIGSEGV signal Our question: How can we modify the default password to something else? UPDATE: by IMM we wanted to mean this: https://en.wikipedia.org/wiki/IBM_Remote_Supervisor_Adapter#Integrated_Management_Module_.28IMM.29

    Read the article

  • Pseudo code for instruction description

    - by Claus
    Hi, I am just trying to fiddle around what is the best and shortest way to describe two simple instructions with C-like pseudo code. The extract instruction is defined as follows: extract rd, rs, imm This instruction extracts the appropriate byte from the 32-bit source register rs and right justifies it in the destination register. The byte is specified by imm and thus can take the values 0 (for the least-significant byte) and 3 (for the most-significant byte). rd = 0x0; // zero-extend result, ie to make sure bits 31 to 8 are set to zero in the result rd = (rs && (0xff << imm)) >> imm; // this extracts the approriate byte and stores it in rd The insert instruction can be regarded as the inverse operation and it takes a right justified byte from the source register rs and deposits it in the appropriate byte of the destination register rd; again, this byte is determined by the value of imm tmp = 0x0 XOR (rs << imm)) // shift the byte to the appropriate byte determined by imm rd = (rd && (0x00 << imm)) // set appropriate byte to zero in rd rd = rd XOR tmp // XOR the byte into the destination register This looks all a bit horrible, so I wonder if there is a little bit a more elegant way to describe this bahaviour in C-like style ;) Many thanks, Claus

    Read the article

  • ????ASMM

    - by Liu Maclean(???)
    ???Oracle??????????????SGA/PGA???,????10g????????????ASMM????,????????ASMM?????????Oracle??????????,?ASMM??????DBA????????????;????????ASMM???????????????DBA???:????????????DB,?????????????DBA?????????????????????????????????,ASMM??????????,???????????,??????????,??????????????????;?10g release 1?10.2??????ASMM?????????????,???????ASMM????????ASMM?????startup???????????ASMM??AMM??,????????DBA????SGA/PGA?????????”??”??”???”???,???????????DBA????chemist(???????1??2??????????????)? ?????????????????ASMM?????,?????????????…… Oracle?SGA???????9i???????????,????: Buffer Cache ????????????,??????????????? Default Pool                  ??????,???DB_CACHE_SIZE?? Keep Pool                     ??????,???DB_KEEP_CACHE_SIZE?? Non standard pool         ???????,???DB_nK_cache_size?? Recycle pool                 ???,???db_recycle_cache_size?? Shared Pool ???,???shared_pool_size?? Library cache   ?????? Row cache      ???,?????? Java Pool         java?,???Java_pool_size?? Large Pool       ??,???Large_pool_size?? Fixed SGA       ???SGA??,???Oracle???????,?????????granule? ?9i?????ASMM,???????????SGA,??????MSMM??9i???buffer cache??????????,?????????????????????????,???9i?????????????,?????????????????????????? ????SGA?????: ?????shared pool?default buffer pool????????,??????????? ?9i???????????(advisor),?????????? ??????????????? ?????????,?????? ?????,?????ORA-04031?????????? ASMM?????: ?????????? ???????????????? ???????sga_target?? ???????????,??????????? ??MSMM???????: ???? ???? ?????? ???? ??????????,??????????? ??????????????????,??????????ORA-04031??? ASMM???????????:1.??????sga_target???????2.???????,???:????(memory component),????(memory broker)???????(memory mechanism)3.????(memory advisor) ASMM????????????(Automatically set),??????:shared_pool_size?db_cache_size?java_pool_size?large_pool _size?streams_pool_size;?????????????????,???:db_keep_cache_size?db_recycle_cache_size?db_nk_cache_size?log_buffer????SGA?????,????????????????,??log_buffer?fixed sga??????????????? ??ASMM?????????sga_target??,???????ASMM??????????????????db_cache_size?java_pool_size???,?????????????????????,????????????????????(???)????????,Oracle?????????(granule,?SGA<1GB?granule???4M,?SGA>1GB?granule???16M)???????,??????????????buffer cache,??????????????????(granule)??????????????????????sga_target??,???????????????????(dism,???????)???ASMM?????????????statistics_level?????typical?ALL,?????BASIC??MMON????(Memory Monitor is a background process that gathers memory statistics (snapshots) stores this information in the AWR (automatic workload repository). MMON is also responsible for issuing alerts for metrics that exceed their thresholds)?????????????????????ASMM?????,???????????sga_target?????statistics_level?BASIC: SQL> show parameter sga NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ lock_sga boolean FALSE pre_page_sga boolean FALSE sga_max_size big integer 2000M sga_target big integer 2000M SQL> show parameter sga_target NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ sga_target big integer 2000M SQL> alter system set statistics_level=BASIC; alter system set statistics_level=BASIC * ERROR at line 1: ORA-02097: parameter cannot be modified because specified value is invalid ORA-00830: cannot set statistics_level to BASIC with auto-tune SGA enabled ?????server parameter file?spfile??,ASMM????shutdown??????????????(Oracle???????,????????)???spfile?,?????strings?????spfile????????????????????,?: G10R2.__db_cache_size=973078528 G10R2.__java_pool_size=16777216 G10R2.__large_pool_size=16777216 G10R2.__shared_pool_size=1006632960 G10R2.__streams_pool_size=67108864 ???spfile?????????????????,???????????”???”?????,??????????”??”?? ?ASMM?????????????? ?????(tunable):????????????????????????????buffer cache?????????,cache????????????????,?????????? IO????????????????????????????Library cache????? subheap????,?????????????????????????????????(open cursors)?????????client??????????????buffer cache???????,???????????pin??buffer???(???????) ?????(Un-tunable):???????????????????,?????????????????,?????????????????????????large pool?????? ??????(Fixed Size):???????????,??????????????????????????????????????? ????????????????(memory resize request)?????????,?????: ??????(Immediate Request):???????????ASMM????????????????????????(chunk)?,??????OUT-OF-MEMORY(ORA-04031)???,????????????????????(granule)????????????????????granule,????????????,?????????????????????????????,????granule??????????????? ??????(Deferred Request):???????????????????????????,??????????????granule???????????????MMON??????????delta. ??????(Manual Request):????????????alter system?????????????????????????????????????????????????granule,??????grow?????ORA-4033??,?????shrink?????ORA-4034??? ?ASMM????,????(Memory Broker)????????????????????????????(Deferred)??????????????????????(auto-tunable component)???????????????,???????????????MMON??????????????????????????????????,????????????????;MMON????Memory Broker?????????????????????????MMON????????????????????????????????????????(resize request system queue)?MMAN????(Memory Manager is a background process that manages the dynamic resizing of SGA memory areas as the workload increases or decreases)??????????????????? ?10gR1?Shared Pool?shrink??????????,?????????????Buffer Cache???????????granule,????Buffer Cache?granule????granule header?Metadata(???buffer header??RAC??Lock Elements)????,?????????????????????shared pool????????duration(?????)?chunk??????granule?,????????????granule??10gR2????Buffer Cache Granule????????granule header?buffer?Metadata(buffer header?LE)????,??shared pool???duration?chunk????????granule,??????buffer cache?shared pool??????????????10gr2?streams pool?????????(???????streams pool duration????) ??????????(Donor,???trace????)???,?????????granule???buffer cache,????granule????????????: ????granule???????granule header ?????chunk????granule?????????buffer header ???,???chunk??????????????????????metadata? ???2-4??,???granule???? ??????????????????,??buffer cache??granule???shared pool?,???????: MMAN??????????buffer cache???granule MMAN????granule??quiesce???(Moving 1 granule from inuse to quiesce list of DEFAULT buffer cache for an immediate req) DBWR???????quiesced???granule????buffer(dirty buffer) MMAN??shared pool????????(consume callback),granule?free?chunk???shared pool??(consume)?,????????????????????granule????shared granule??????,???????????granule???????????,??????pin??buffer??Metadata(???buffer header?LE)?????buffer cache??? ???granule???????shared pool,???granule?????shared??? ?????ASMM???????????,??????????: _enabled_shared_pool_duration:?????????10g????shared pool duration??,?????sga_target?0?????false;???10.2.0.5??cursor_space_for_time???true??????false,???10.2.0.5??cursor_space_for_time????? _memory_broker_shrink_heaps:???????0??Oracle?????shared pool?java pool,??????0,??shrink request??????????????????? _memory_management_tracing: ???????MMON?MMAN??????????(advisor)?????(Memory Broker)?????trace???;??ORA-04031????????36,???8?????????????trace,???23????Memory Broker decision???,???32???cache resize???;??????????: Level Contents 0×01 Enables statistics tracing 0×02 Enables policy tracing 0×04 Enables transfer of granules tracing 0×08 Enables startup tracing 0×10 Enables tuning tracing 0×20 Enables cache tracing ?????????_memory_management_tracing?????DUMP_TRANSFER_OPS????????????????,?????????????????trace?????????mman_trace?transfer_ops_dump? SQL> alter system set "_memory_management_tracing"=63; System altered Operation make shared pool grow and buffer cache shrink!!!.............. ???????granule?????,????default buffer pool?resize??: AUTO SGA: Request 0xdc9c2628 after pre-processing, ret=0 /* ???0xdc9c2628??????addr */ AUTO SGA: IMMEDIATE, FG request 0xdc9c2628 /* ???????????Immediate???? */ AUTO SGA: Receiver of memory is shared pool, size=16, state=3, flg=0 /* ?????????shared pool,???,????16?granule,??grow?? */ AUTO SGA: Donor of memory is DEFAULT buffer cache, size=106, state=4, flg=0 /* ???????Default buffer cache,????,????106?granule,??shrink?? */ AUTO SGA: Memory requested=3896, remaining=3896 /* ??immeidate request???????3896 bytes */ AUTO SGA: Memory received=0, minreq=3896, gransz=16777216 /* ????free?granule,??received?0,gransz?granule??? */ AUTO SGA: Request 0xdc9c2628 status is INACTIVE /* ??????????,??????inactive?? */ AUTO SGA: Init bef rsz for request 0xdc9c2628 /* ????????before-process???? */ AUTO SGA: Set rq dc9c2628 status to PENDING /* ?request??pending?? */ AUTO SGA: 0xca000000 rem=3896, rcvd=16777216, 105, 16777216, 17 /* ???????0xca000000?16M??granule */ AUTO SGA: Returning 4 from kmgs_process for request dc9c2628 AUTO SGA: Process req dc9c2628 ret 4, 1, a AUTO SGA: Resize done for pool DEFAULT, 8192 /* ???default pool?resize */ AUTO SGA: Init aft rsz for request 0xdc9c2628 AUTO SGA: Request 0xdc9c2628 after processing AUTO SGA: IMMEDIATE, FG request 0x7fff917964a0 AUTO SGA: Receiver of memory is shared pool, size=17, state=0, flg=0 AUTO SGA: Donor of memory is DEFAULT buffer cache, size=105, state=0, flg=0 AUTO SGA: Memory requested=3896, remaining=0 AUTO SGA: Memory received=16777216, minreq=3896, gransz=16777216 AUTO SGA: Request 0x7fff917964a0 status is COMPLETE /* shared pool????16M?granule */ AUTO SGA: activated granule 0xca000000 of shared pool ?????partial granule????????????trace: AUTO SGA: Request 0xdc9c2628 after pre-processing, ret=0 AUTO SGA: IMMEDIATE, FG request 0xdc9c2628 AUTO SGA: Receiver of memory is shared pool, size=82, state=3, flg=1 AUTO SGA: Donor of memory is DEFAULT buffer cache, size=36, state=4, flg=1 /* ????????shared pool,?????default buffer cache */ AUTO SGA: Memory requested=4120, remaining=4120 AUTO SGA: Memory received=0, minreq=4120, gransz=16777216 AUTO SGA: Request 0xdc9c2628 status is INACTIVE AUTO SGA: Init bef rsz for request 0xdc9c2628 AUTO SGA: Set rq dc9c2628 status to PENDING AUTO SGA: Moving granule 0x93000000 of DEFAULT buffer cache to activate list AUTO SGA: Moving 1 granule 0x8c000000 from inuse to quiesce list of DEFAULT buffer cache for an immediate req /* ???buffer cache??????0x8c000000?granule??????inuse list, ???????quiesce list? */ AUTO SGA: Returning 0 from kmgs_process for request dc9c2628 AUTO SGA: Process req dc9c2628 ret 0, 1, 20a AUTO SGA: activated granule 0x93000000 of DEFAULT buffer cache AUTO SGA: NOT_FREE for imm req for gran 0x8c000000 / * ??dbwr??0x8c000000 granule????dirty buffer */ AUTO SGA: Returning 0 from kmgs_process for request dc9c2628 AUTO SGA: Process req dc9c2628 ret 0, 1, 20a AUTO SGA: NOT_FREE for imm req for gran 0x8c000000 AUTO SGA: Returning 0 from kmgs_process for request dc9c2628 AUTO SGA: Process req dc9c2628 ret 0, 1, 20a AUTO SGA: NOT_FREE for imm req for gran 0x8c000000 AUTO SGA: Returning 0 from kmgs_process for request dc9c2628 AUTO SGA: Process req dc9c2628 ret 0, 1, 20a AUTO SGA: NOT_FREE for imm req for gran 0x8c000000 AUTO SGA: Returning 0 from kmgs_process for request dc9c2628 AUTO SGA: Process req dc9c2628 ret 0, 1, 20a AUTO SGA: NOT_FREE for imm req for gran 0x8c000000 AUTO SGA: Returning 0 from kmgs_process for request dc9c2628 AUTO SGA: Process req dc9c2628 ret 0, 1, 20a AUTO SGA: NOT_FREE for imm req for gran 0x8c000000 ......................................... AUTO SGA: Rcv shared pool consuming 8192 from 0x8c000000 in granule 0x8c000000; owner is DEFAULT buffer cache AUTO SGA: Rcv shared pool consuming 90112 from 0x8c002000 in granule 0x8c000000; owner is DEFAULT buffer cache AUTO SGA: Rcv shared pool consuming 24576 from 0x8c01a000 in granule 0x8c000000; owner is DEFAULT buffer cache AUTO SGA: Rcv shared pool consuming 65536 from 0x8c022000 in granule 0x8c000000; owner is DEFAULT buffer cache AUTO SGA: Rcv shared pool consuming 131072 from 0x8c034000 in granule 0x8c000000; owner is DEFAULT buffer cache AUTO SGA: Rcv shared pool consuming 286720 from 0x8c056000 in granule 0x8c000000; owner is DEFAULT buffer cache AUTO SGA: Rcv shared pool consuming 98304 from 0x8c09e000 in granule 0x8c000000; owner is DEFAULT buffer cache AUTO SGA: Rcv shared pool consuming 106496 from 0x8c0b8000 in granule 0x8c000000; owner is DEFAULT buffer cache ..................... /* ??shared pool????0x8c000000 granule??chunk, ??granule?owner????default buffer cache */ AUTO SGA: Imm xfer 0x8c000000 from quiesce list of DEFAULT buffer cache to partial inuse list of shared pool /* ???0x8c000000 granule?default buffer cache????????shared pool????inuse list */ AUTO SGA: Returning 4 from kmgs_process for request dc9c2628 AUTO SGA: Process req dc9c2628 ret 4, 1, 20a AUTO SGA: Init aft rsz for request 0xdc9c2628 AUTO SGA: Request 0xdc9c2628 after processing AUTO SGA: IMMEDIATE, FG request 0x7fffe9bcd0e0 AUTO SGA: Receiver of memory is shared pool, size=83, state=0, flg=1 AUTO SGA: Donor of memory is DEFAULT buffer cache, size=35, state=0, flg=1 AUTO SGA: Memory requested=4120, remaining=0 AUTO SGA: Memory received=14934016, minreq=4120, gransz=16777216 AUTO SGA: Request 0x7fffe9bcd0e0 status is COMPLETE /* ????partial transfer?? */ ?????partial transfer??????DUMP_TRANSFER_OPS????0x8c000000 partial granule???????,?: SQL> oradebug setmypid; Statement processed. SQL> oradebug dump DUMP_TRANSFER_OPS 1; Statement processed. SQL> oradebug tracefile_name; /s01/admin/G10R2/udump/g10r2_ora_21482.trc =======================trace content============================== GRANULE SIZE is 16777216 COMPONENT NAME : shared pool Number of granules in partially inuse list (listid 4) is 23 Granule addr is 0x8c000000 Granule owner is DEFAULT buffer cache /* ?0x8c000000 granule?shared pool?partially inuse list, ?????owner??default buffer cache */ Granule 0x8c000000 dump from owner perspective gptr = 0x8c000000, num buf hdrs = 1989, num buffers = 156, ghdr = 0x8cffe000 / * ?????granule?granule header????0x8cffe000, ????156?buffer block,1989?buffer header */ /* ??granule??????,??????buffer cache??shared pool chunk */ BH:0x8cf76018 BA:(nil) st:11 flg:20000 BH:0x8cf76128 BA:(nil) st:11 flg:20000 BH:0x8cf76238 BA:(nil) st:11 flg:20000 BH:0x8cf76348 BA:(nil) st:11 flg:20000 BH:0x8cf76458 BA:(nil) st:11 flg:20000 BH:0x8cf76568 BA:(nil) st:11 flg:20000 BH:0x8cf76678 BA:(nil) st:11 flg:20000 BH:0x8cf76788 BA:(nil) st:11 flg:20000 BH:0x8cf76898 BA:(nil) st:11 flg:20000 BH:0x8cf769a8 BA:(nil) st:11 flg:20000 BH:0x8cf76ab8 BA:(nil) st:11 flg:20000 BH:0x8cf76bc8 BA:(nil) st:11 flg:20000 BH:0x8cf76cd8 BA:0x8c018000 st:1 flg:622202 ............... Address 0x8cf30000 to 0x8cf74000 not in cache Address 0x8cf74000 to 0x8d000000 in cache Granule 0x8c000000 dump from receivers perspective Dumping layout Address 0x8c000000 to 0x8c018000 in sga heap(1,3) (idx=1, dur=4) Address 0x8c018000 to 0x8c01a000 not in this pool Address 0x8c01a000 to 0x8c020000 in sga heap(1,3) (idx=1, dur=4) Address 0x8c020000 to 0x8c022000 not in this pool Address 0x8c022000 to 0x8c032000 in sga heap(1,3) (idx=1, dur=4) Address 0x8c032000 to 0x8c034000 not in this pool Address 0x8c034000 to 0x8c054000 in sga heap(1,3) (idx=1, dur=4) Address 0x8c054000 to 0x8c056000 not in this pool Address 0x8c056000 to 0x8c09c000 in sga heap(1,3) (idx=1, dur=4) Address 0x8c09c000 to 0x8c09e000 not in this pool Address 0x8c09e000 to 0x8c0b6000 in sga heap(1,3) (idx=1, dur=4) Address 0x8c0b6000 to 0x8c0b8000 not in this pool Address 0x8c0b8000 to 0x8c0d2000 in sga heap(1,3) (idx=1, dur=4) ???????granule?????shared granule??????,?????????buffer block,????1?shared subpool??????durtaion?4?chunk,duration=4?execution duration;??duration?chunk???????????,??extent???quiesce list??????????????free?execution duration?????????????,??????duration???extent(??????extent????granule)??????? ?????????????ASMM?????????,????: V$SGAINFODisplays summary information about the system global area (SGA). V$SGADisplays size information about the SGA, including the sizes of different SGA components, the granule size, and free memory. V$SGASTATDisplays detailed information about the SGA. V$SGA_DYNAMIC_COMPONENTSDisplays information about the dynamic SGA components. This view summarizes information based on all completed SGA resize operations since instance startup. V$SGA_DYNAMIC_FREE_MEMORYDisplays information about the amount of SGA memory available for future dynamic SGA resize operations. V$SGA_RESIZE_OPSDisplays information about the last 400 completed SGA resize operations. V$SGA_CURRENT_RESIZE_OPSDisplays information about SGA resize operations that are currently in progress. A resize operation is an enlargement or reduction of a dynamic SGA component. V$SGA_TARGET_ADVICEDisplays information that helps you tune SGA_TARGET. ?????????shared pool duration???,?????????

    Read the article

  • hide keyboard in android?

    - by Niranjan Khandelwal
    Hello all, I am new to android development. I am creating an application in which when app launches the edittextfield getfocus automatically and the keyboard pop-up.I want to hide the keyboard by default and show when edittextField get focus.I have tried this method but it's not working. InputMethodManager imm = (InputMethodManager)getSystemService(Context.INPUT_METHOD_SERVICE); imm.hideSoftInputFromWindow(myEditText.getWindowToken(), 0); Thanks Niranjan Khandelwal

    Read the article

  • Flex Builder debug problem

    - by Chetan Sachdev
    I am running on Windows XP and recently updated Flash Player from v9 to v10.1. And Now, in the Debug Console under Flex Builder, I am getting a lot of debug statements(I think that is assembly). Below is an example, of what I get: " active: eax(737-757) ecx(738-758) ebx(3-797) esi(728-756) @739 st 143112124(0) <- @3 09002830 mov 143112124(0), ebx active: eax(737-757) ecx(738-758) ebx(3-797) esi(728-756) @740 ldop 0(@3) 09002836 mov edx, 0(ebx) active: eax(737-757) ecx(738-758) edx(740-754) ebx(3-797) esi(728-756) @741 ldop 20(@740) 09002838 mov edi, 20(edx) active: eax(737-757) ecx(738-758) edx(740-754) ebx(3-797) esi(728-756) edi(741-742) * @742 lea 4(@741) spans call 0900283B lea edi, 4(edi) active: eax(737-757) ecx(738-758) edx(740-754) ebx(3-797) esi(728-756) edi(742-769) * @743 st 143111460(0) <- @742 0900283E mov 143111460(0), edi active: eax(737-757) ecx(738-758) edx(740-754) ebx(3-797) esi(728-756) edi(742-769) * @744 alloc 12 alloca 12 at 120 for @744 activation.size 132 stacksize 132 entries 17 -8(ebp) (6-792) alloc -20(ebp) (7-792) alloc -68(ebp) (8-792) alloc -72(ebp) (0-793) arg -76(ebp) (16-797) def -80(ebp) (440-797) def -80(ebp) -84(ebp) -88(ebp) (1-793) arg -92(ebp) -96(ebp) -100(ebp) (2-793) arg -104(ebp) -112(ebp) -116(ebp) -120(ebp) -132(ebp) (744-760) alloc active: eax(737-757) ecx(738-758) edx(740-754) ebx(3-797) esi(728-756) edi(742-769) * @745 imm 2 active: eax(737-757) ecx(738-758) edx(740-754) ebx(3-797) esi(728-756) edi(742-769) * @746 st 0(@744) <- @745 09002844 mov -132(ebp), 2 active: eax(737-757) ecx(738-758) edx(740-754) ebx(3-797) esi(728-756) edi(742-769) * @747 imm 139523392 active: eax(737-757) ecx(738-758) edx(740-754) ebx(3-797) esi(728-756) edi(742-769) * @748 st 4(@744) <- @747 0900284E mov -128(ebp), 139523392 active: eax(737-757) ecx(738-758) edx(740-754) ebx(3-797) esi(728-756) edi(742-769) * @749 imm 136426472 active: eax(737-757) ecx(738-758) edx(740-754) ebx(3-797) esi(728-756) edi(742-769) * @750 st 8(@744) <- @749 09002855 mov -124(ebp), 136426472 active: eax(737-757) ecx(738-758) edx(740-754) ebx(3-797) esi(728-756) edi(742-769) * @751 ldop 16(@738) STEAL any @738 alloca 4 at 80 for @738 activation.size 132 stacksize 132 entries 17 -8(ebp) (6-792) alloc -20(ebp) (7-792) alloc -68(ebp) (8-792) alloc -72(ebp) (0-793) arg -76(ebp) (16-797) def -80(ebp) (440-797) def -80(ebp) -84(ebp) (738-758) use -88(ebp) (1-793) arg -92(ebp) -96(ebp) -100(ebp) (2-793) arg -104(ebp) -112(ebp) -116(ebp) -120(ebp) -132(ebp) (744-760) alloc 0900285C mov -84(ebp), ecx 0900285F mov ecx, 16(ecx) active: eax(737-757) ecx(751-759) edx(740-754) ebx(3-797) esi(728-756) edi(742-769) * @752 imm 1 active: eax(737-757) ecx(751-759) edx(740-754) ebx(3-797) esi(728-756) edi(742-769) * @753 or @738 @752 STEAL any @751 alloca 4 at 88 for @751 activation.size 132 stacksize 132 entries 17 -8(ebp) (6-792) alloc -20(ebp) (7-792) alloc -68(ebp) (8-792) alloc -72(ebp) (0-793) arg -76(ebp) (16-797) def -80(ebp) (440-797) def -80(ebp) -84(ebp) (738-758) use -88(ebp) (1-793) arg -92(ebp) (751-759) ldop -96(ebp) -100(ebp) (2-793) arg -104(ebp) -112(ebp) -116(ebp) -120(ebp) -132(ebp) (744-760) alloc 09002862 mov -92(ebp), ecx 09002865 mov ecx, -84(ebp) 09002868 or ecx, 1 active: eax(737-757) ecx(753-759) edx(740-754) ebx(3-797) esi(728-756) edi(742-769) * " I am not sure, why it started, but any help will be appreciated.

    Read the article

  • How to stop the android soft keyboard from ever coming up in my entire application

    - by JohnnyLambada
    I'm developing an application on a hardware device that has a built-in hardware keyboard that does not slide out so is always visible (like a blackberry). Therefore, I NEVER want the soft keyboard to display for my entire application. I'm aware of another SO question that gives the following lines of code: InputMethodManager imm = (InputMethodManager)getSystemService(Context.INPUT_METHOD_SERVICE); imm.hideSoftInputFromWindow(myEditText.getWindowToken(), 0); But I don't know where to put this code to hide the soft keyboard in all places where it might possibly appear in my Activity. I have tried adding the code to Activity.onUserInteraction to no avail. It seems the keyboard appears after the onUserInteraction executes.

    Read the article

  • Hide Soft Keyboard Not Working ...

    - by stormin986
    I'm developing on the Droid Incredible (and have tested on a 1.5 AVD Emulator as well), and one of the tabs in my tab widget consists of a listview and a row with an EditText and a Send button (for a chat feature). I am using the following to close the soft keyboard once I click Send, but it's not working. This is identical to code I've found elsewhere that people have upvoted as correct. See anything I'm missing? // in Button's onClick(): EditText chatTextBox = (EditText) findViewById(R.id.chat_entry); // Handle button click ... chatTextBox.setText(""); InputMethodManager imm = (InputMethodManager)getSystemService(Context.INPUT_METHOD_SERVICE); imm.hideSoftInputFromInputMethod(chatTextBox.getWindowToken(), InputMethodManager.HIDE_IMPLICIT_ONLY); I also tried changing the flag to 0. No luck. Anyone know what's up??

    Read the article

  • Error when selecting content from ADDTIME(CURTIME(), '14400 hour') format

    - by Blahwhore
    So apparently i've stumbled upon a coding error when trying to select the time from my database. SELECT * FROM `videos` WHERE `added_time` > AddTime( CurTime(), '14400 hour' ) is the code, i'm trying to select all the videos posted 10 days (14400 hours) ago using the "added_time" format, because it worked for my previous coding but in this one it work work. Shown below is a link to the image showing how my database structure for videos are shown. http://i.imm.io/NURT.png Edit: Previously i had this problem for retrieving and deleting bulletins posted 10 days ago, and this code worked, however this code apparently won't work when trying to retrieve the videos :/ I don't know why, they're using the same format. See: http://i.imm.io/NUSW.png

    Read the article

  • System x3550 M2 stuck on system initializing after firmware upgrades

    - by itmanager223
    Hey guys so i have been having this major issue for the last few hours now. I have a system x 3550M2 server and i ran the UEFI and IMM firmware upgrades within windows server 2008 R2 x64. All upgrades went fine and i was told to reboot. I performed the reboot cleanly using the OS restart option. Upon restarting it showed the system initializing screen and it stayed there for a good hour. After that hour i figured it froze and so i powered down and power up again. Now i can not boot back up to even see the IBM splash screen or the OS... I have tried switching the Jumpers to go to the backup UEFI and backup IMM and no luck. I have also reset the CMOS power and i have pressed the reset button 3 times on the light path and no luck. There are no lights light on the light path to indicate anything is broken. The only thing i see on the light path is the number 0.5. Any ideas guys i am quite stumped with this problem. Thanks a lot, Dani Cela

    Read the article

  • Firefox on wine crashes on startup on Ubuntu

    - by Iam Zesh
    First, let's explain why I want Firefox under wine, and not the Firefox that is shipped out of the box with Ubuntu. I want to use Firefox under wine because I want to use the Widevine addon, which is "at this time not available for linux". Here is what I did so far to install and use Firefox on wine. On Ubuntu 12.04 LTS, I just installed wine like that: sudo apt-get update; sudo apt-get install wine Then I downloaded the windows installer for Firefox from the mozilla website. I ran the Firefox Setup 25.0.exe file with wine but at the end of the install process when launching Firefox, I got a window notifying me that the program at crashed. I ran Firefox from the command line with wine, to get an idea of what could have went wrong: wine /home/myUser/.wine/drive_c/Program\ Files/Mozilla\ Firefox/firefox.exe fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:process:SetProcessDEPPolicy (1): stub fixme:iphlpapi:NotifyAddrChange (Handle 0x368e8fc, overlapped 0x368e8e0): stub fixme:winsock:WSCGetProviderPath ({e70f1aa0-ab8b-11cf-8ca3-00805f48a192} 0x44fe6f8 0x44fe6b8 0x44fe6e4) Stub! fixme:advapi:RegisterTraceGuidsW (0x1b0e290, 0x39ead80, {509962e0-406b-46f4-99ba-5a009f8d2225}, 3, 0x3974d00, (null), (null), 0x39eadb0,): stub fixme:winsock:WSCGetProviderPath ({e70f1aa0-ab8b-11cf-8ca3-00805f48a192} 0x44fe6f8 0x44fe6b8 0x44fe6e4) Stub! fixme:winsock:WSCGetProviderPath ({11058240-be47-11cf-95c8-00805f48a192} 0x44fe6f8 0x44fe6b8 0x44fe6e4) Stub! fixme:winsock:WSCGetProviderPath ({11058241-be47-11cf-95c8-00805f48a192} 0x44fe6f8 0x44fe6b8 0x44fe6e4) Stub! fixme:winsock:WSCGetProviderPath ({11058241-be47-11cf-95c8-00805f48a192} 0x44fe6f8 0x44fe6b8 0x44fe6e4) Stub! fixme:ntdll:NtLockFile I/O completion on lock not implemented yet fixme:advapi:SetNamedSecurityInfoW L"C:\\users\\myUser\\Application Data\\Mozilla\\Firefox\\Profiles\\cn4oy6kh.default\\extensions.ini" 1 536870916 (nil) (nil) 0x13d40c (nil) fixme:imm:ImmReleaseContext (0x20022, 0x13e850): stub fixme:win:EnumDisplayDevicesW ((null),0,0x32ee18,0x00000000), stub! fixme:shell:ApplicationAssociationRegistration_QueryCurrentDefault (0x143b50)->(L"webcal", 1, 1, 0x32c7a0) fixme:shell:ApplicationAssociationRegistration_QueryCurrentDefault (0x143b50)->(L"ircs", 1, 1, 0x32c7a0) fixme:shell:ApplicationAssociationRegistration_QueryCurrentDefault (0x143b50)->(L"mailto", 1, 1, 0x32c7a0) fixme:shell:ApplicationAssociationRegistration_QueryCurrentDefault (0x143b50)->(L"irc", 1, 1, 0x32c7a0) fixme:alsa:AudioSessionControl_SetGroupingParam (0x153050)->({7b0a93ee-05e7-4576-9cc5-64fdf201f303}, (null)) - stub fixme:alsa:AudioSessionControl_SetGroupingParam (0x153050)->({00000000-0000-0000-0000-000000000000}, (null)) - stub fixme:alsa:AudioSessionControl_UnregisterAudioSessionNotification (0x153050)->(0x6311880) - stub wine: Call from 0x7b839cf2 to unimplemented function dwmapi.dll.DwmGetCompositionTimingInfo, aborting fixme:dbghelp:elf_search_auxv can't find symbol in module Unfortunately I don't know what to do from there on...

    Read the article

  • jquery ui.sortable with tooltips

    - by FFish
    On a page I have a sortable list with thumbnails. When rolling over the images I wanted a tooltip to show a bigger image. I found qTip, but maybe there is something better / easier? How can I connect the imgPath var from the sortable to the qtip? var imgPath = '<img src="002171/imm/001.jpg" />'; $("#sortable").sortable(); $("#sortable").disableSelection(); $('#sortable li img').qtip({ content: { text: imgPath } }); <div id="demo"> <ul id="sortable"> <li><img src="002171/tn/001.jpg" /></li> <li><img src="002171/tn/002.jpg" /></li> <li><img src="002171/tn/003.jpg" /></li> </ul> </div>

    Read the article

  • PHP simplexml and xpath

    - by FFish
    I have an XML file like this: <?xml version="1.0" encoding="UTF-8"?> <gallery> <album tnPath="tn/" lgPath="imm/" fsPath="iml/" > <img src="001.jpg" /> <img src="002.jpg" /> </album> </gallery> I am reading the file with: $xmlFile = "xml.xml"; $xmlStr = file_get_contents($xmlFile . "?" . time()); $xmlObj = simplexml_load_string($xmlStr); Now I am rebuilding the XML file and would like to save the album node with it's attributes in a var I was thinking with xpath: // these all return arrays with the images... // echo $xmlObj->xpath('/gallery/album@tnPath'); // echo $xmlObj->xpath('//album[@tnPath]'); // echo $xmlObj->xpath('//@tnPath'); But that doesn't seem to work? Any help?

    Read the article

  • PHP DOMDocument getElementsByTagname??

    - by FFish
    This is driving me bonkers... I just want to add another img node. $xml = <<<XML <?xml version="1.0" encoding="UTF-8"?> <gallery> <album tnPath="tn/" lgPath="imm/" fsPath="iml/" > <img src="004.jpg" caption="4th caption" /> <img src="005.jpg" caption="5th caption" /> <img src="006.jpg" caption="6th caption" /> </album> </gallery> XML; $xmlDoc = new DOMDocument(); $xmlDoc->loadXML($xml); $album = $xmlDoc->getElementsByTagname('album')[0]; // Parse error: syntax error, unexpected '[' in /Applications/XAMPP/xamppfiles/htdocs/admin/tests/DOMDoc.php on line 17 $album = $xmlDoc->getElementsByTagname('album'); // Fatal error: Call to undefined method DOMNodeList::appendChild() in /Applications/XAMPP/xamppfiles/htdocs/admin/tests/DOMDoc.php on line 19 $newImg = $xmlDoc->createElement("img"); $album->appendChild($newImg); print $xmlDoc->saveXML(); Error:

    Read the article

  • How to show virtual keypad in an android activity

    - by Maxood
    Why am i not able to show the virtual keyboard in my activity. Here is my code: package som.android.keypad; import android.app.Activity; import android.os.Bundle; import android.view.inputmethod.InputMethodManager; import android.widget.EditText; public class ShowKeypad extends Activity { InputMethodManager imm; @Override public void onCreate(Bundle icicle) { super.onCreate(icicle); EditText editText = (EditText)findViewById(R.id.EditText); ((InputMethodManager) getSystemService(this.INPUT_METHOD_SERVICE)).showSoftInput(editText, 0); } } <?xml version="1.0" encoding="utf-8"?> <manifest xmlns:android="http://schemas.android.com/apk/res/android" package="som.android.keypad" android:versionCode="1" android:versionName="1.0"> <application android:icon="@drawable/icon" android:label="@string/app_name"> <activity android:name=".ShowKeypad" android:windowSoftInputMode="stateAlwaysVisible" android:label="@string/app_name"> <intent-filter> <action android:name="android.intent.action.MAIN" /> <category android:name="android.intent.category.LAUNCHER" /> </intent-filter> </activity> </application> <uses-sdk android:minSdkVersion="4" /> </manifest>

    Read the article

1