Search Results

Search found 562 results on 23 pages for 'inspect'.

Page 1/23 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Cisco SR520w FE - WAN Port Stops Working

    - by Mike Hanley
    I have setup a Cisco SR520W and everything appears to be working. After about 1-2 days, it looks like the WAN port stops forwarding traffic to the Internet gateway IP of the device. If I unplug and then plug in the network cable connecting the WAN port of the SR520W to my Comcast Cable Modem, traffic startings flowing again. Also, if I restart the SR520W, the traffic will flow again. Any ideas? Here is the running config: Current configuration : 10559 bytes ! version 12.4 no service pad no service timestamps debug uptime service timestamps log datetime msec no service password-encryption ! hostname hostname.mydomain.com ! boot-start-marker boot-end-marker ! logging message-counter syslog no logging rate-limit enable secret 5 <removed> ! aaa new-model ! ! aaa authentication login default local aaa authorization exec default local ! ! aaa session-id common clock timezone PST -8 clock summer-time PDT recurring ! crypto pki trustpoint TP-self-signed-334750407 enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-334750407 revocation-check none rsakeypair TP-self-signed-334750407 ! ! crypto pki certificate chain TP-self-signed-334750407 certificate self-signed 01 <removed> quit dot11 syslog ! dot11 ssid <removed> vlan 75 authentication open authentication key-management wpa guest-mode wpa-psk ascii 0 <removed> ! ip source-route ! ! ip dhcp excluded-address 172.16.0.1 172.16.0.10 ! ip dhcp pool inside import all network 172.16.0.0 255.240.0.0 default-router 172.16.0.1 dns-server 10.0.0.15 10.0.0.12 domain-name mydomain.com ! ! ip cef ip domain name mydomain.com ip name-server 68.87.76.178 ip name-server 66.240.48.9 ip port-map user-ezvpn-remote port udp 10000 ip ips notify SDEE ip ips name sdm_ips_rule ! ip ips signature-category category all retired true category ios_ips basic retired false ! ip inspect log drop-pkt no ipv6 cef ! multilink bundle-name authenticated parameter-map type inspect z1-z2-pmap audit-trail on password encryption aes ! ! username admin privilege 15 secret 5 <removed> ! crypto key pubkey-chain rsa named-key realm-cisco.pub key-string <removed> quit ! ! ! ! ! ! crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 connect auto group EZVPN_GROUP_1 key <removed> mode client peer 64.1.208.90 virtual-interface 1 username admin password <removed> xauth userid mode local ! ! archive log config logging enable logging size 600 hidekeys ! ! ! class-map type inspect match-any SDM_AH match access-group name SDM_AH class-map type inspect match-any SDM-Voice-permit match protocol sip class-map type inspect match-any SDM_ESP match access-group name SDM_ESP class-map type inspect match-any SDM_EASY_VPN_REMOTE_TRAFFIC match protocol isakmp match protocol ipsec-msft match class-map SDM_AH match class-map SDM_ESP match protocol user-ezvpn-remote class-map type inspect match-all SDM_EASY_VPN_REMOTE_PT match class-map SDM_EASY_VPN_REMOTE_TRAFFIC match access-group 101 class-map type inspect match-any Easy_VPN_Remote_VT match access-group 102 class-map type inspect match-any sdm-cls-icmp-access match protocol icmp match protocol tcp match protocol udp class-map type inspect match-any sdm-cls-insp-traffic match protocol cuseeme match protocol dns match protocol ftp match protocol h323 match protocol https match protocol icmp match protocol imap match protocol pop3 match protocol netshow match protocol shell match protocol realmedia match protocol rtsp match protocol smtp extended match protocol sql-net match protocol streamworks match protocol tftp match protocol vdolive match protocol tcp match protocol udp class-map type inspect match-any L4-inspect-class match protocol icmp class-map type inspect match-all sdm-invalid-src match access-group 100 class-map type inspect match-all dhcp_out_self match access-group name dhcp-resp-permit class-map type inspect match-all dhcp_self_out match access-group name dhcp-req-permit class-map type inspect match-all sdm-protocol-http match protocol http ! ! policy-map type inspect sdm-permit-icmpreply class type inspect dhcp_self_out pass class type inspect sdm-cls-icmp-access inspect class class-default pass policy-map type inspect sdm-permit_VT class type inspect Easy_VPN_Remote_VT pass class class-default drop policy-map type inspect sdm-inspect class type inspect SDM-Voice-permit pass class type inspect sdm-cls-insp-traffic inspect class type inspect sdm-invalid-src drop log class type inspect sdm-protocol-http inspect z1-z2-pmap class class-default pass policy-map type inspect sdm-inspect-voip-in class type inspect SDM-Voice-permit pass class class-default drop policy-map type inspect sdm-permit class type inspect SDM_EASY_VPN_REMOTE_PT pass class type inspect dhcp_out_self pass class class-default drop ! zone security ezvpn-zone zone security out-zone zone security in-zone zone-pair security sdm-zp-in-ezvpn1 source in-zone destination ezvpn-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-out-ezpn1 source out-zone destination ezvpn-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-ezvpn-out1 source ezvpn-zone destination out-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-self-out source self destination out-zone service-policy type inspect sdm-permit-icmpreply zone-pair security sdm-zp-out-in source out-zone destination in-zone service-policy type inspect sdm-inspect-voip-in zone-pair security sdm-zp-ezvpn-in1 source ezvpn-zone destination in-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-out-self source out-zone destination self service-policy type inspect sdm-permit zone-pair security sdm-zp-in-out source in-zone destination out-zone service-policy type inspect sdm-inspect ! bridge irb ! ! interface FastEthernet0 switchport access vlan 75 ! interface FastEthernet1 switchport access vlan 75 ! interface FastEthernet2 switchport access vlan 75 ! interface FastEthernet3 switchport access vlan 75 ! interface FastEthernet4 description $FW_OUTSIDE$ ip address 75.149.48.76 255.255.255.240 ip nat outside ip ips sdm_ips_rule out ip virtual-reassembly zone-member security out-zone duplex auto speed auto crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 ! interface Virtual-Template1 type tunnel no ip address ip virtual-reassembly zone-member security ezvpn-zone tunnel mode ipsec ipv4 ! interface Dot11Radio0 no ip address ! encryption vlan 75 mode ciphers aes-ccm ! ssid <removed> ! speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0 station-role root ! interface Dot11Radio0.75 encapsulation dot1Q 75 native ip virtual-reassembly bridge-group 75 bridge-group 75 subscriber-loop-control bridge-group 75 spanning-disabled bridge-group 75 block-unknown-source no bridge-group 75 source-learning no bridge-group 75 unicast-flooding ! interface Vlan1 no ip address ip virtual-reassembly bridge-group 1 ! interface Vlan75 no ip address ip virtual-reassembly bridge-group 75 bridge-group 75 spanning-disabled ! interface BVI1 no ip address ip nat inside ip virtual-reassembly ! interface BVI75 description $FW_INSIDE$ ip address 172.16.0.1 255.240.0.0 ip nat inside ip ips sdm_ips_rule in ip virtual-reassembly zone-member security in-zone crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 inside ! ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 75.149.48.78 2 ! ip http server ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ip nat inside source list 1 interface FastEthernet4 overload ! ip access-list extended SDM_AH remark SDM_ACL Category=1 permit ahp any any ip access-list extended SDM_ESP remark SDM_ACL Category=1 permit esp any any ip access-list extended dhcp-req-permit remark SDM_ACL Category=1 permit udp any eq bootpc any eq bootps ip access-list extended dhcp-resp-permit remark SDM_ACL Category=1 permit udp any eq bootps any eq bootpc ! access-list 1 remark SDM_ACL Category=2 access-list 1 permit 172.16.0.0 0.15.255.255 access-list 100 remark SDM_ACL Category=128 access-list 100 permit ip host 255.255.255.255 any access-list 100 permit ip 127.0.0.0 0.255.255.255 any access-list 100 permit ip 75.149.48.64 0.0.0.15 any access-list 101 remark SDM_ACL Category=128 access-list 101 permit ip host 64.1.208.90 any access-list 102 remark SDM_ACL Category=1 access-list 102 permit ip any any ! ! ! ! snmp-server community <removed> RO ! control-plane ! bridge 1 protocol ieee bridge 1 route ip bridge 75 route ip banner login ^CSR520 Base Config - MFG 1.0 ^C ! line con 0 no modem enable line aux 0 line vty 0 4 transport input telnet ssh ! scheduler max-task-time 5000 end I also ran some diagnostics when the WAN port stopped working: 1. show interface fa4 FastEthernet4 is up, line protocol is up Hardware is PQUICC_FEC, address is 0026.99c5.b434 (bia 0026.99c5.b434) Description: $FW_OUTSIDE$ Internet address is 75.149.48.76/28 MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, 100BaseTX/FX ARP type: ARPA, ARP Timeout 04:00:00 Last input 01:08:15, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/23/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 1000 bits/sec, 0 packets/sec 336446 packets input, 455403158 bytes Received 23 broadcasts, 0 runts, 0 giants, 37 throttles 41 input errors, 0 CRC, 0 frame, 0 overrun, 41 ignored 0 watchdog 0 input packets with dribble condition detected 172529 packets output, 23580132 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 unknown protocol drops 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier 0 output buffer failures, 0 output buffers swapped out 2. show ip route Gateway of last resort is 75.149.48.78 to network 0.0.0.0 C 192.168.75.0/24 is directly connected, BVI75 64.0.0.0/32 is subnetted, 1 subnets S 64.1.208.90 [1/0] via 75.149.48.78 S 192.168.10.0/24 is directly connected, BVI75 75.0.0.0/28 is subnetted, 1 subnets C 75.149.48.64 is directly connected, FastEthernet4 S* 0.0.0.0/0 [2/0] via 75.149.48.78 3. show ip arp Protocol Address Age (min) Hardware Addr Type Interface Internet 75.149.48.65 69 001e.2a39.7b08 ARPA FastEthernet4 Internet 75.149.48.76 - 0026.99c5.b434 ARPA FastEthernet4 Internet 75.149.48.78 93 0022.2d6c.ae36 ARPA FastEthernet4 Internet 192.168.75.1 - 0027.0d58.f5f0 ARPA BVI75 Internet 192.168.75.12 50 7c6d.62c7.8c0a ARPA BVI75 Internet 192.168.75.13 0 001b.6301.1227 ARPA BVI75 4. sh ip cef Prefix Next Hop Interface 0.0.0.0/0 75.149.48.78 FastEthernet4 0.0.0.0/8 drop 0.0.0.0/32 receive 64.1.208.90/32 75.149.48.78 FastEthernet4 75.149.48.64/28 attached FastEthernet4 75.149.48.64/32 receive FastEthernet4 75.149.48.65/32 attached FastEthernet4 75.149.48.76/32 receive FastEthernet4 75.149.48.78/32 attached FastEthernet4 75.149.48.79/32 receive FastEthernet4 127.0.0.0/8 drop 192.168.10.0/24 attached BVI75 192.168.75.0/24 attached BVI75 192.168.75.0/32 receive BVI75 192.168.75.1/32 receive BVI75 192.168.75.12/32 attached BVI75 192.168.75.13/32 attached BVI75 192.168.75.255/32 receive BVI75 224.0.0.0/4 drop 224.0.0.0/24 receive 240.0.0.0/4 drop 255.255.255.255/32 receive Thanks in advance, -Mike

    Read the article

  • How to Inspect Javascript Object

    - by Madhan ayyasamy
    You can inspect any JavaScript objects and list them as indented, ordered by levels.It shows you type and property name. If an object property can't be accessed, an error message will be shown.Here the snippets for inspect javascript object.function inspect(obj, maxLevels, level){  var str = '', type, msg;    // Start Input Validations    // Don't touch, we start iterating at level zero    if(level == null)  level = 0;    // At least you want to show the first level    if(maxLevels == null) maxLevels = 1;    if(maxLevels < 1)             return '<font color="red">Error: Levels number must be > 0</font>';    // We start with a non null object    if(obj == null)    return '<font color="red">Error: Object <b>NULL</b></font>';    // End Input Validations    // Each Iteration must be indented    str += '<ul>';    // Start iterations for all objects in obj    for(property in obj)    {      try      {          // Show "property" and "type property"          type =  typeof(obj[property]);          str += '<li>(' + type + ') ' + property +                  ( (obj[property]==null)?(': <b>null</b>'):('')) + '</li>';          // We keep iterating if this property is an Object, non null          // and we are inside the required number of levels          if((type == 'object') && (obj[property] != null) && (level+1 < maxLevels))          str += inspect(obj[property], maxLevels, level+1);      }      catch(err)      {        // Is there some properties in obj we can't access? Print it red.        if(typeof(err) == 'string') msg = err;        else if(err.message)        msg = err.message;        else if(err.description)    msg = err.description;        else                        msg = 'Unknown';        str += '<li><font color="red">(Error) ' + property + ': ' + msg +'</font></li>';      }    }      // Close indent      str += '</ul>';    return str;}Method Call:function inspect(obj [, maxLevels [, level]]) Input Vars * obj: Object to inspect * maxLevels: Optional. Number of levels you will inspect inside the object. Default MaxLevels=1 * level: RESERVED for internal use of the functionReturn ValueHTML formatted string containing all values of inspected object obj.

    Read the article

  • Cisco - Zone Policy Actions (pass, inspect, drop, log) - What is the difference?

    - by Jonathan Rioux
    Have these commands for instance: policy-map type inspect IN-OUT_PlcyMAP class type inspect IN-OUT_ClassMAP inspect <------ policy-map type inspect IN-OUT_PlcyMap class type inspect IN-OUT_ClassMAP pass <------ zone security INSIDE zone security OUTSIDE zone-pair security IN->OUT source INSIDE destination OUTSIDE service-policy type inspect IN-OUT_PlcyMAP What is the difference between "inspect", "pass", "drop", "log", and "reset ? I could not found any information on this on Google.

    Read the article

  • Why ruby has to_s and inspect?

    - by prosseek
    The p calls inspect, and puts/print calls to_s for representing its object. If I run class Graph def initialize @nodeArray = Array.new @wireArray = Array.new end def to_s # called with print / puts "Graph : #{@nodeArray.size}" end def inspect # called with p "G" end end if __FILE__ == $0 gr = Graph.new p gr print gr puts gr end I get G Graph : 0Graph : 0 Then, why does ruby has two functions do the same thing? What makes the difference between to_s and inspect? If I comment out the to_s or inspect function, I get as follows. ##

    Read the article

  • firefox 12 turn off Inspect Element (Q)

    - by user35563
    Go the new FF12 and I hit the "Inspect Element (Q)", i'm use to hitting "Inspect" and getting FireBug, now i get the FF inspection tool. It looks nice, but how do i turn it off? Not disable it, but stop inspecting the current page? I have to close the tab, when working on a large web application, have to sign back in and re-setup everything i was testing to get back to a normal view. Big waste of time.

    Read the article

  • How to inspect remote SMTP server's TLS certificate?

    - by Miles Erickson
    We have an Exchange 2007 server running on Windows Server 2008. Our client uses another vendor's mail server. Their security policies require us to use enforced TLS. This was working fine until recently. Now, when Exchange tries to deliver mail to the client's server, it logs the following: A secure connection to domain-secured domain 'ourclient.com' on connector 'Default external mail' could not be established because the validation of the Transport Layer Security (TLS) certificate for ourclient.com failed with status 'UntrustedRoot. Contact the administrator of ourclient.com to resolve the problem, or remove the domain from the domain-secured list. Removing ourclient.com from the TLSSendDomainSecureList causes messages to be delivered successfully using opportunistic TLS, but this is a temporary workaround at best. The client is an extremely large, security-sensitive international corporation. Our IT contact there claims to be unaware of any changes to their TLS certificate. I have asked him repeatedly to please identify the authority that generated the certificate so that I can troubleshoot the validation error, but so far he has been unable to provide an answer. For all I know, our client could have replaced their valid TLS certificate with one from an in-house certificate authority. Does anyone know a way to manually inspect a remote SMTP server's TLS certificate, as one can do for a remote HTTPS server's certificate in a web browser? It could be very helpful to determine who issued the certificate and compare that information against the list of trusted root certificates on our Exchange server.

    Read the article

  • Does dict.update affect a function's argspec?

    - by sbox32
    import inspect class Test: def test(self, p, d={}): d.update(p) return d print inspect.getargspec(getattr(Test, 'test'))[3] print Test().test({'1':True}) print inspect.getargspec(getattr(Test, 'test'))[3] I would expect the argspec for Test.test not to change but because of dict.update it does. Why?

    Read the article

  • FireBug - inspect element problem -- showing different interface?

    - by Susan
    When I used to use Firebugs inspect elements feature it displayed the results like this below. Nice, nested tags on the left...css style on the right. Recently, however, when I try to inspect elements it always shows this: I've tried reverting to older versions of FireBug (can't remember if it started after an update?).. I've poked around the settings... Can't find why it's different. The interface it's showing now is completely useless for figuring out what's going on in the html / css.

    Read the article

  • Get class of caller's method (via inspect) in Python (alt: super() emulator)

    - by Slava Vishnyakov
    Is it possible to get reference to class B in this example? class A(object): pass class B(A): def test(self): test2() class C(B): pass import inspect def test2(): frame = inspect.currentframe().f_back cls = frame.[?something here?] # cls here should == B (class) c = C() c.test() Basically, C is child of B, B is child of A. Then we create c of type C. Then the call to c.test() actually calls B.test() (via inheritance), which calls to test2(). test2() can get the parent frame frame; code reference to method via frame.f_code; self via frame.f_locals['self']; but type(frame.f_locals['self']) is C (of course), but not B, where method is defined. Any way to get B?

    Read the article

  • Get class of caller's method (via inspect) in Python

    - by Slava Vishnyakov
    Is it possible to get reference to class B in this example? class A(object): pass class B(A): def test(self): test2() class C(B): pass import inspect def test2(): frame = inspect.currentframe().f_back cls = frame.[?something here?] # cls here should == B (class) c = C() c.test() Basically, C is child of B, B is child of A. Then we create c of type C. Then the call to c.test() actually calls B.test() (via inheritance), which calls to test2(). test2() can get the parent frame frame; code reference to method via frame.f_code; self via frame.f_locals['self']; but type(frame.f_locals['self']) is C (of course), but not B, where method is defined. Any way to get B?

    Read the article

  • QoS basics on a Cisco ASA

    - by qbn
    Could someone briefly explain how to use QoS on Cisco ASA 5505? I have the basics of policing down, but what about shaping and priorities? Basically what I'm trying to do is carve out some bandwidth for my VPN subnets (in an object-group called priority-traffic). I've seen this Cisco QoS document, however configuring shaping and priority-queue don't seem to have any effects in my test. A full download of the linux kernel from kernel.org will boost a ping to a server via VPN sky high. Policing has been successful in passing this test, although it doesn't seem as efficient (I cap non-vpn traffic at 3 of my 4.5 megabits of bandwidth). Am I misunderstanding the results of the test? I think there is some simple concept I'm not grasping here. EDIT: Here is my config thus far (I have 4.5 megabits of bandwidth): access-list priority-traffic extended permit ip object-group priority-traffic any access-list priority-traffic extended permit ip any object-group priority-traffic access-list priority-traffic extended permit icmp object-group priority-traffic any access-list priority-traffic extended permit icmp any object-group priority-traffic access-list non-priority-traffic extended deny ip object-group priority-traffic any access-list non-priority-traffic extended deny ip any object-group priority-traffic access-list non-priority-traffic extended permit ip any any priority-queue outside queue-limit 440 class-map non-priority-traffic match access-list non-priority-traffic class-map priority-traffic match access-list priority-traffic class-map inspection_default match default-inspection-traffic policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp policy-map outbound-qos-policy class non-priority-traffic police input 2500000 police output 2500000 class priority-traffic priority service-policy global_policy global service-policy outbound-qos-policy interface outside

    Read the article

  • Obtaining references to function objects on the execution stack from the frame object?

    - by Marcin
    Given the output of inspect.stack(), is it possible to get the function objects from anywhere from the stack frame and call these? If so, how? (I already know how to get the names of the functions.) Here is what I'm getting at: Let's say I'm a function and I'm trying to determine if my caller is a generator or a regular function? I need to call inspect.isgeneratorfunction() on the function object. And how do you figure out who called you? inspect.stack(), right? So if I can somehow put those together, I'll have the answer to my question. Perhaps there is an easier way to do this?

    Read the article

  • Jquery history, inspect the history stack

    - by nickmorss
    Im using this history jquery plugin http://www.mikage.to/jquery/jquery_history.html and im trying to inspect the back stack. I can call this $.historyCurrentHash to return the current hash, but im trying to figure out how to look one step back in the stack. if i try calling this $.historyBackStack, but i just get an 'undefined'. anyone got any ideas? I can see that its not a public variable, but im wondering if i need to modify the library or just call it in a different way

    Read the article

  • inspect C++ template instantiation

    - by aaa
    hello. Is there some utility which would allow me to inspect template instantiation? my compiler is g++ or Intel. Specific points I would like: Step by step instantiation. Instantiation backtrace (can hack this by crashing compiler. Better method?) Inspection of template parameters. Thanks

    Read the article

  • Inspect in memory hsqldb while debugging

    - by Albert
    We're using hdsqldb in memory to run junit tests which operate against a database. The db is setup before running each test via a spring configuration. All works fine. Now when a tests fails it can be convinient to be able to inspect the values in the in memory database. Is this possible? If so how? Our url is: jdbc.url=jdbc:hsqldb:mem:testdb;sql.enforce_strict_size=true The database is destroyed after each tests. But when the debugger is running the database should also still be alive. I've tried connecting with the sqldb databaseManager. That works, but I don't see any tables or data. Any help is highly appreciated!

    Read the article

  • Any way to set or overwrite the __line__ and __file__ metadata?

    - by charles.merriam
    I'm writing some code that needs to change function signatures. Right now, I'm using Simionato's FunctionMaker class, which uses the (hacky) inspect module, and does a compile. Unfortunately, this still loses the line and file metadata. Does anyone know: If it is possible to overwrite these values in some odd way? If hacking up a class with a complex getattribute() to intercept the values and also try to make the class looks like a function is any more possible than a moose with a flying nun hat? Is there an alternative to the (hacky) inspect module? PEP 362 is dead dead dead? I know decorators and cPickle users fight with this. What other situations is the read only metadata in people's way? I appreciate any insights. Thank you.

    Read the article

  • Inspect the referrer in PHP

    - by Ngu Soon Hui
    Is it possible to check who is entering your website in PHP. I have a web application ( written in PHP) that should only allow users entering from some particular websites. Is it possible to get the referral websites by examining the _Request object? If yes, how?

    Read the article

  • Possible to Inspect Innards of Core C# Functionality

    - by Nick Babcock
    I was struck today, with the inclination to compare the innards of Buffer.BlockCopy and Array.CopyTo. I am curious to see if Array.CopyTo called Buffer.BlockCopy behind the scenes. There is no practical purpose behind this, I just want to further my understanding of the C# language and how it is implemented. Don't jump the gun and accuse me of micro-optimization, but you can accuse me of being curious! When I ran ILasm on mscorlib.dll I received this for Array.CopyTo .method public hidebysig newslot virtual final instance void CopyTo(class System.Array 'array', int32 index) cil managed { // Code size 0 (0x0) } // end of method Array::CopyTo and this for Buffer.BlockCopy .method public hidebysig static void BlockCopy(class System.Array src, int32 srcOffset, class System.Array dst, int32 dstOffset, int32 count) cil managed internalcall { .custom instance void System.Security.SecuritySafeCriticalAttribute::.ctor() = ( 01 00 00 00 ) } // end of method Buffer::BlockCopy Which, frankly, baffles me. I've never run ILasm on a dll/exe I didn't create. Does this mean that I won't be able to see how these functions are implemented? Searching around only revealed a stackoverflow question, which Marc Gravell said [Buffer.BlockCopy] is basically a wrapper over a raw mem-copy While insightful, it doesn't answer my question if Array.CopyTo calls Buffer.BlockCopy. I'm specifically interested in if I'm able to see how these two functions are implemented, and if I had future questions about the internals of C#, if it is possible for me to investigate it. Or am I out of luck?

    Read the article

  • How to inspect JSP request URL for String

    - by IAmYourFaja
    I have the following processor.jsp file: <% response.sendRedirect("http://buzz.example.com"); %> I want to change it so that it inspects the HTTP request URL for the presence of the word "fizz" and, if it exists, redirect the user to http://fizz.example.org instead. So something like: <% String reqUrl = request.getURL().toLowerCase(); String token = null; if(reqUrl.contains("fizz")) { token = "fizz"; } else { token = "buzz"; } String respUrl = "http://%%%TOKEN%%%.example.com".replace("%%%TOKEN%%%", token); response.sendRedirect(respUrl); %> However this doesn't work. Any ideas on what I should be using instead of request, or if I'm doing anything else wrong?

    Read the article

  • Cisco ASA: Allowing and Denying VPN Access based on membership to an AD group

    - by milkandtang
    I have a Cisco ASA 5505 connecting to an Active Directory server for VPN authentication. Usually we'd restrict this to a particular OU, but in this case users which need access are spread across multiple OUs. So, I'd like to use a group to specify which users have remote access. I've created the group and added the users, but I'm having trouble figuring out how to deny users which aren't in that group. Right now, if someone connects they get assigned the correct group policy "companynamera" if they are in that group, so the LDAP mapping is working. However, users who are not in that group still authenticate fine, and their group policy becomes the LDAP path of their first group, i.e. CN=Domain Users,CN=Users,DC=example,DC=com, and then are still allowed access. How do I add a filter so that I can map everything that isn't "companynamera" to no access? Config I'm using (with some stuff such as ACLs and mappings removed, since they are just noise here): gateway# show run : Saved : ASA Version 8.2(1) ! hostname gateway domain-name corp.company-name.com enable password gDZcqZ.aUC9ML0jK encrypted passwd gDZcqZ.aUC9ML0jK encrypted names name 192.168.0.2 dc5 description FTP Server name 192.168.0.5 dc2 description Everything server name 192.168.0.6 dc4 description File Server name 192.168.0.7 ts1 description Light Use Terminal Server name 192.168.0.8 ts2 description Heavy Use Terminal Server name 4.4.4.82 primary-frontier name 5.5.5.26 primary-eschelon name 172.21.18.5 dmz1 description Kerio Mail Server and FTP Server name 4.4.4.84 ts-frontier name 4.4.4.85 vpn-frontier name 5.5.5.28 ts-eschelon name 5.5.5.29 vpn-eschelon name 5.5.5.27 email-eschelon name 4.4.4.83 guest-frontier name 4.4.4.86 email-frontier dns-guard ! interface Vlan1 nameif inside security-level 100 ip address 192.168.0.254 255.255.255.0 ! interface Vlan2 description Frontier FiOS nameif outside security-level 0 ip address primary-frontier 255.255.255.0 ! interface Vlan3 description Eschelon T1 nameif backup security-level 0 ip address primary-eschelon 255.255.255.248 ! interface Vlan4 nameif dmz security-level 50 ip address 172.21.18.254 255.255.255.0 ! interface Vlan5 nameif guest security-level 25 ip address 172.21.19.254 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 switchport access vlan 3 ! interface Ethernet0/2 switchport access vlan 4 ! interface Ethernet0/3 switchport access vlan 5 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive clock timezone PST -8 clock summer-time PDT recurring dns domain-lookup inside dns server-group DefaultDNS name-server dc2 domain-name corp.company-name.com same-security-traffic permit intra-interface access-list companyname_splitTunnelAcl standard permit 192.168.0.0 255.255.255.0 access-list companyname_splitTunnelAcl standard permit 172.21.18.0 255.255.255.0 access-list inside_nat0_outbound extended permit ip any 172.21.20.0 255.255.255.0 access-list inside_nat0_outbound extended permit ip any 172.21.18.0 255.255.255.0 access-list bypassingnat_dmz extended permit ip 172.21.18.0 255.255.255.0 192.168.0.0 255.255.255.0 pager lines 24 logging enable logging buffer-size 12288 logging buffered warnings logging asdm notifications mtu inside 1500 mtu outside 1500 mtu backup 1500 mtu dmz 1500 mtu guest 1500 ip local pool VPNpool 172.21.20.50-172.21.20.59 mask 255.255.255.0 no failover icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 global (outside) 1 interface global (outside) 2 email-frontier global (outside) 3 guest-frontier global (backup) 1 interface global (dmz) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 2 dc5 255.255.255.255 nat (inside) 1 192.168.0.0 255.255.255.0 nat (dmz) 0 access-list bypassingnat_dmz nat (dmz) 2 dmz1 255.255.255.255 nat (dmz) 1 172.21.18.0 255.255.255.0 access-group outside_access_in in interface outside access-group dmz_access_in in interface dmz route outside 0.0.0.0 0.0.0.0 4.4.4.1 1 track 1 route backup 0.0.0.0 0.0.0.0 5.5.5.25 254 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 ldap attribute-map RemoteAccessMap map-name memberOf IETF-Radius-Class map-value memberOf CN=RemoteAccess,CN=Users,DC=corp,DC=company-name,DC=com companynamera dynamic-access-policy-record DfltAccessPolicy aaa-server ActiveDirectory protocol ldap aaa-server ActiveDirectory (inside) host dc2 ldap-base-dn dc=corp,dc=company-name,dc=com ldap-scope subtree ldap-login-password * ldap-login-dn cn=administrator,ou=Admins,dc=corp,dc=company-name,dc=com server-type microsoft aaa-server ADRemoteAccess protocol ldap aaa-server ADRemoteAccess (inside) host dc2 ldap-base-dn dc=corp,dc=company-name,dc=com ldap-scope subtree ldap-login-password * ldap-login-dn cn=administrator,ou=Admins,dc=corp,dc=company-name,dc=com server-type microsoft ldap-attribute-map RemoteAccessMap aaa authentication enable console LOCAL aaa authentication ssh console LOCAL http server enable http 192.168.0.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart sla monitor 123 type echo protocol ipIcmpEcho 4.4.4.1 interface outside num-packets 3 frequency 10 sla monitor schedule 123 life forever start-time now crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 ! track 1 rtr 123 reachability telnet timeout 5 ssh 192.168.0.0 255.255.255.0 inside ssh timeout 5 ssh version 2 console timeout 0 management-access inside dhcpd auto_config outside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn group-policy companynamera internal group-policy companynamera attributes wins-server value 192.168.0.5 dns-server value 192.168.0.5 vpn-tunnel-protocol IPSec password-storage enable split-tunnel-policy tunnelspecified split-tunnel-network-list value companyname_splitTunnelAcl default-domain value corp.company-name.com split-dns value corp.company-name.com group-policy companyname internal group-policy companyname attributes wins-server value 192.168.0.5 dns-server value 192.168.0.5 vpn-tunnel-protocol IPSec password-storage enable split-tunnel-policy tunnelspecified split-tunnel-network-list value companyname_splitTunnelAcl default-domain value corp.company-name.com split-dns value corp.company-name.com username admin password IhpSqtN210ZsNaH. encrypted privilege 15 tunnel-group companyname type remote-access tunnel-group companyname general-attributes address-pool VPNpool authentication-server-group ActiveDirectory LOCAL default-group-policy companyname tunnel-group companyname ipsec-attributes pre-shared-key * tunnel-group companynamera type remote-access tunnel-group companynamera general-attributes address-pool VPNpool authentication-server-group ADRemoteAccess LOCAL default-group-policy companynamera tunnel-group companynamera ipsec-attributes pre-shared-key * ! class-map type inspect ftp match-all ftp-inspection-map class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect ftp ftp-inspection-map parameters class ftp-inspection-map policy-map type inspect dns migrated_dns_map_1 parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns migrated_dns_map_1 inspect ftp inspect h323 h225 inspect h323 ras inspect http inspect ils inspect netbios inspect rsh inspect rtsp inspect skinny inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp inspect icmp inspect icmp error inspect esmtp inspect pptp ! service-policy global_policy global prompt hostname context Cryptochecksum:487525494a81c8176046fec475d17efe : end gateway# Thanks so much!

    Read the article

  • Initial Cisco ASA 5510 Config

    - by Brendan ODonnell
    Fair warning, I'm a but of a noob so please bear with me. I'm trying to set up a new ASA 5510. I have a pretty simple set up with one /24 on the inside NATed to a DHCP address on the outside. Everything on the inside works and I can ping the outside interface from external devices. No matter what I do I can't get anything internal to route across the border to the outside and back. To try and eliminate ACL issues as a possibility I added permit any any rules to the incoming access lists on the inside and outside interfaces. I'd appreciate any help I can get. Here's the sh run. : Saved : ASA Version 8.4(3) ! hostname gateway domain-name xxx.local enable password xxx encrypted passwd xxx encrypted names ! interface Ethernet0/0 nameif outside security-level 0 ip address dhcp setroute ! interface Ethernet0/1 nameif inside security-level 100 ip address 10.x.x.x 255.255.255.0 ! interface Ethernet0/2 shutdown no nameif no security-level no ip address ! interface Ethernet0/3 shutdown no nameif no security-level no ip address ! interface Management0/0 nameif management security-level 100 ip address 192.168.1.1 255.255.255.0 management-only ! ftp mode passive dns domain-lookup inside dns server-group DefaultDNS name-server 10.x.x.x domain-name xxx.local same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network inside-network subnet 10.x.x.x 255.255.255.0 object-group protocol TCPUDP protocol-object udp protocol-object tcp access-list outside_access_in extended permit ip any any access-list inside_access_in extended permit ip any any pager lines 24 logging enable logging buffered informational logging asdm informational mtu management 1500 mtu inside 1500 mtu outside 1500 no failover icmp unreachable rate-limit 1 burst-size 1 icmp permit any inside icmp permit any outside no asdm history enable arp timeout 14400 ! object network inside-network nat (any,outside) dynamic interface access-group inside_access_in in interface inside access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout pat-xlate 0:00:30 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy user-identity default-domain LOCAL aaa authentication ssh console LOCAL aaa authentication http console LOCAL http server enable http 192.168.1.0 255.255.255.0 management http 10.x.x.x 255.255.255.0 inside http authentication-certificate management http authentication-certificate inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart telnet timeout 5 ssh 192.168.1.0 255.255.255.0 management ssh 10.x.x.x 255.255.255.0 inside ssh timeout 5 ssh version 2 console timeout 0 dhcp-client client-id interface outside dhcpd address 192.168.1.2-192.168.1.254 management dhcpd enable management ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn username xxx password xxx encrypted ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options inspect icmp ! service-policy global_policy global prompt hostname context no call-home reporting anonymous Cryptochecksum:fe19874e18fe7107948eb0ada6240bc2 : end no asdm history enable

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >