Search Results

Search found 18781 results on 752 pages for 'ip port'.

Page 1/752 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Cisco 800 series won't forward port

  - by sam

  Hello ServerFault, I am trying to forward port 444 from my cisco router to my Web Server (192.168.0.2). As far as I can tell, my port forwarding is configured correctly, yet no traffic will pass through on port 444. Here is my config: ! version 12.3 service config no service pad service tcp-keepalives-in service tcp-keepalives-out service timestamps debug uptime service timestamps log uptime service password-encryption no service dhcp ! hostname QUESTMOUNT ! logging buffered 16386 informational logging rate-limit 100 except warnings no logging console no logging monitor enable secret 5 -removed- ! username administrator secret 5 -removed- username manager secret 5 -removed- clock timezone NZST 12 clock summer-time NZDT recurring 1 Sun Oct 2:00 3 Sun Mar 3:00 aaa new-model ! ! aaa authentication login default local aaa authentication login userlist local aaa authentication ppp default local aaa authorization network grouplist local aaa session-id common ip subnet-zero no ip source-route no ip domain lookup ip domain name quest.local ! ! no ip bootp server ip inspect name firewall tcp ip inspect name firewall udp ip inspect name firewall cuseeme ip inspect name firewall h323 ip inspect name firewall rcmd ip inspect name firewall realaudio ip inspect name firewall streamworks ip inspect name firewall vdolive ip inspect name firewall sqlnet ip inspect name firewall tftp ip inspect name firewall ftp ip inspect name firewall icmp ip inspect name firewall sip ip inspect name firewall fragment maximum 256 timeout 1 ip inspect name firewall netshow ip inspect name firewall rtsp ip inspect name firewall skinny ip inspect name firewall http ip audit notify log ip audit po max-events 100 ip audit name intrusion info list 3 action alarm ip audit name intrusion attack list 3 action alarm drop reset no ftp-server write-enable ! ! ! ! crypto isakmp policy 1 authentication pre-share ! crypto isakmp policy 2 encr 3des authentication pre-share group 2 ! crypto isakmp client configuration group staff key 0 qS;,sc:q<skro1^, domain quest.local pool vpnclients acl 106 ! ! crypto ipsec transform-set tr-null-sha esp-null esp-sha-hmac crypto ipsec transform-set tr-des-md5 esp-des esp-md5-hmac crypto ipsec transform-set tr-des-sha esp-des esp-sha-hmac crypto ipsec transform-set tr-3des-sha esp-3des esp-sha-hmac ! crypto dynamic-map vpnusers 1 description Client to Site VPN Users set transform-set tr-des-md5 ! ! crypto map cm-cryptomap client authentication list userlist crypto map cm-cryptomap isakmp authorization list grouplist crypto map cm-cryptomap client configuration address respond crypto map cm-cryptomap 65000 ipsec-isakmp dynamic vpnusers ! ! ! ! interface Ethernet0 ip address 192.168.0.254 255.255.255.0 ip access-group 102 in ip nat inside hold-queue 100 out ! interface ATM0 no ip address no atm ilmi-keepalive dsl operating-mode auto ! interface ATM0.1 point-to-point pvc 0/100 encapsulation aal5mux ppp dialer dialer pool-member 1 ! ! interface Dialer0 bandwidth 640 ip address negotiated ip access-group 101 in no ip redirects no ip unreachables ip nat outside ip inspect firewall out ip audit intrusion in encapsulation ppp no ip route-cache no ip mroute-cache dialer pool 1 dialer-group 1 no cdp enable ppp pap sent-username -removed- password 7 -removed- ppp ipcp dns request crypto map cm-cryptomap ! ip local pool vpnclients 192.168.99.1 192.168.99.254 ip nat inside source list 105 interface Dialer0 overload ip nat inside source static tcp 192.168.0.2 444 interface Dialer0 444 ip nat inside source static tcp 192.168.0.51 9000 interface Dialer0 9000 ip nat inside source static udp 192.168.0.2 1433 interface Dialer0 1433 ip nat inside source static tcp 192.168.0.2 1433 interface Dialer0 1433 ip nat inside source static tcp 192.168.0.2 25 interface Dialer0 25 ip classless ip route 0.0.0.0 0.0.0.0 Dialer0 ip http server no ip http secure-server ! ip access-list logging interval 10 logging 192.168.0.2 access-list 1 remark The local LAN. access-list 1 permit 192.168.0.0 0.0.0.255 access-list 2 permit 192.168.0.0 access-list 2 remark Where management can be done from. access-list 2 permit 192.168.0.0 0.0.0.255 access-list 3 remark Traffic not to check for intrustion detection. access-list 3 deny 192.168.99.0 0.0.0.255 access-list 3 permit any access-list 101 remark Traffic allowed to enter the router from the Internet access-list 101 permit ip 192.168.99.0 0.0.0.255 192.168.0.0 0.0.0.255 access-list 101 deny ip 0.0.0.0 0.255.255.255 any access-list 101 deny ip 10.0.0.0 0.255.255.255 any access-list 101 deny ip 127.0.0.0 0.255.255.255 any access-list 101 deny ip 169.254.0.0 0.0.255.255 any access-list 101 deny ip 172.16.0.0 0.15.255.255 any access-list 101 deny ip 192.0.2.0 0.0.0.255 any access-list 101 deny ip 192.168.0.0 0.0.255.255 any access-list 101 deny ip 198.18.0.0 0.1.255.255 any access-list 101 deny ip 224.0.0.0 0.15.255.255 any access-list 101 deny ip any host 255.255.255.255 access-list 101 permit tcp 67.228.209.128 0.0.0.15 any eq 1433 access-list 101 permit tcp host 120.136.2.22 any eq 1433 access-list 101 permit tcp host 123.100.90.58 any eq 1433 access-list 101 permit udp 67.228.209.128 0.0.0.15 any eq 1433 access-list 101 permit udp host 120.136.2.22 any eq 1433 access-list 101 permit udp host 123.100.90.58 any eq 1433 access-list 101 permit tcp any any eq 444 access-list 101 permit tcp any any eq 9000 access-list 101 permit tcp any any eq smtp access-list 101 permit udp any any eq non500-isakmp access-list 101 permit udp any any eq isakmp access-list 101 permit esp any any access-list 101 permit tcp any any eq 1723 access-list 101 permit gre any any access-list 101 permit tcp any any eq 22 access-list 101 permit tcp any any eq telnet access-list 102 remark Traffic allowed to enter the router from the Ethernet access-list 102 permit ip any host 192.168.0.254 access-list 102 deny ip any host 192.168.0.255 access-list 102 deny udp any any eq tftp log access-list 102 permit ip 192.168.0.0 0.0.0.255 192.168.99.0 0.0.0.255 access-list 102 deny ip any 0.0.0.0 0.255.255.255 log access-list 102 deny ip any 10.0.0.0 0.255.255.255 log access-list 102 deny ip any 127.0.0.0 0.255.255.255 log access-list 102 deny ip any 169.254.0.0 0.0.255.255 log access-list 102 deny ip any 172.16.0.0 0.15.255.255 log access-list 102 deny ip any 192.0.2.0 0.0.0.255 log access-list 102 deny ip any 192.168.0.0 0.0.255.255 log access-list 102 deny ip any 198.18.0.0 0.1.255.255 log access-list 102 deny udp any any eq 135 log access-list 102 deny tcp any any eq 135 log access-list 102 deny udp any any eq netbios-ns log access-list 102 deny udp any any eq netbios-dgm log access-list 102 deny tcp any any eq 445 log access-list 102 permit ip 192.168.0.0 0.0.0.255 any access-list 102 permit ip any host 255.255.255.255 access-list 102 deny ip any any log access-list 105 remark Traffic to NAT access-list 105 deny ip 192.168.0.0 0.0.0.255 192.168.99.0 0.0.0.255 access-list 105 permit ip 192.168.0.0 0.0.0.255 any access-list 106 remark User to Site VPN Clients access-list 106 permit ip 192.168.0.0 0.0.0.255 any dialer-list 1 protocol ip permit ! line con 0 no modem enable line aux 0 line vty 0 4 access-class 2 in transport input telnet ssh transport output none ! scheduler max-task-time 5000 ! end any ideas? :)

  Read the article

• Static IP for dynamic IP

  - by scape279

  I have a dynamic IP address. I would like to have a static IP, but Virgin Media don't allow static IPs for residential broadband services, even if you ask them really nicely and offer to pay for it without switching to a business tariff. I am already registered with a dynamic DNS service which is updated by my router eg me.example.com will always resolve to my dynamic IP. This is fine for some circumstances, but not if you can only enter an IP address into configuration files/hardware etc like firewalls, subversion services etc etc. Is there a way I can have a static IP address 'forwarding' to my dynamic IP? Would a possible solution involve tunnelling? Setting up a private proxy? Please note the following: I am able to buy an IP address from my web host. I have access to a webserver and I am able to create custom DNS zones. I'm happy to have a webserver running at home if necessary also. I do not wish to change broadband providers. I have zero control over the services that require the IP address entering so I cannot tackle the problem that way round (services I need to access are at work). PS I've tried googling this issue, but it is very difficult to search for as most results are related to dynamic dns (which I already have set up and isnt quite what I'm after)

  Read the article

• How to run node.js app on port 80? Are processes blocking my port?

  - by Lucas

  I believe the port 80 on my remote instance is blocked, and I am trying to run a node.js app using port 80. I have experimented with ports 3000 and 3002, and both ports are working fine, but I get an error when running on port 80. I suspect port 80 is blocked from my output of netstat -an below, but how can I find the process id's of the addresses that are blocking port 80 below? [lucas@ecoinstance]~/node/nodetest1$ netstat -an Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 127.0.0.1:27017 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:3002 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:27017 127.0.0.1:51108 ESTABLISHED tcp 0 0 127.0.0.1:51106 127.0.0.1:27017 ESTABLISHED tcp 0 0 127.0.0.1:27017 127.0.0.1:51106 ESTABLISHED tcp 0 0 127.0.0.1:51107 127.0.0.1:27017 ESTABLISHED tcp 0 0 10.240.241.116:3002 174.61.171.61:36583 TIME_WAIT tcp 0 0 127.0.0.1:27017 127.0.0.1:51109 ESTABLISHED tcp 0 0 10.240.241.116:42423 169.254.169.254:80 ESTABLISHED tcp 0 0 127.0.0.1:51108 127.0.0.1:27017 ESTABLISHED tcp 0 532 10.240.241.116:22 174.61.171.61:56824 ESTABLISHED tcp 0 0 127.0.0.1:27017 127.0.0.1:51107 ESTABLISHED tcp 0 0 10.240.241.116:42412 169.254.169.254:80 ESTABLISHED tcp 0 0 127.0.0.1:51109 127.0.0.1:27017 ESTABLISHED tcp 0 0 127.0.0.1:51105 127.0.0.1:27017 ESTABLISHED tcp 0 0 10.240.241.116:42422 169.254.169.254:80 TIME_WAIT tcp 0 0 127.0.0.1:27017 127.0.0.1:51105 ESTABLISHED tcp6 0 0 :::22 :::* LISTEN udp 0 0 0.0.0.0:49948 0.0.0.0:* udp 0 0 0.0.0.0:68 0.0.0.0:* udp 0 0 10.240.241.116:123 0.0.0.0:* udp 0 0 127.0.0.1:123 0.0.0.0:* udp 0 0 0.0.0.0:123 0.0.0.0:* udp6 0 0 :::12151 :::* udp6 0 0 :::123 :::* Active UNIX domain sockets (servers and established) Proto RefCnt Flags Type State I-Node Path unix 2 [ ACC ] STREAM LISTENING 405680 /tmp/ssh-KdkxJfFLpKTC/agent.22 813 unix 2 [ ACC ] STREAM LISTENING 408230 /tmp/ssh-ofUeNNEwAqtP/agent.22 243 unix 2 [ ACC ] STREAM LISTENING 416227 /tmp/mongodb-27017.sock unix 2 [ ACC ] SEQPACKET LISTENING 3692 /run/udev/control unix 7 [ ] DGRAM 5286 /dev/log unix 2 [ ACC ] STREAM LISTENING 5318 /var/run/acpid.socket unix 2 [ ACC ] STREAM LISTENING 16170 /tmp//tmux-1000/default unix 2 [ ACC ] STREAM LISTENING 414450 /var/run/dbus/system_bus_socke And here is the log when trying to run on port 80 with node.js: [lucas@ecoinstance]~/node/nodetest1$ npm start > [email protected] start /home/lucas/node/nodetest1 > node ./bin/www events.js:72 throw er; // Unhandled 'error' event ^ Error: listen EACCES at errnoException (net.js:904:11) at Server._listen2 (net.js:1023:19) at listen (net.js:1064:10) at Server.listen (net.js:1138:5) at Function.app.listen (/home/lucas/node/nodetest1/node_modules/express/lib/applicati on.js:532:24) at Object.<anonymous> (/home/lucas/node/nodetest1/bin/www:7:18) at Module._compile (module.js:456:26) at Object.Module._extensions..js (module.js:474:10) at Module.load (module.js:356:32) at Function.Module._load (module.js:312:12) npm ERR! [email protected] start: `node ./bin/www` npm ERR! Exit status 8 npm ERR! npm ERR! Failed at the [email protected] start script. npm ERR! This is most likely a problem with the nodetest1 package, npm ERR! not with npm itself. npm ERR! Tell the author that this fails on your system: npm ERR! node ./bin/www npm ERR! You can get their info via: npm ERR! npm owner ls nodetest1 npm ERR! There is likely additional logging output above. npm ERR! System Linux 3.13-0.bpo.1-amd64 npm ERR! command "/usr/local/bin/node" "/usr/local/bin/npm" "start" npm ERR! cwd /home/lucas/node/nodetest1 npm ERR! node -v v0.10.28 npm ERR! npm -v 1.4.9 npm ERR! code ELIFECYCLE npm ERR! npm ERR! Additional logging details can be found in: npm ERR! /home/lucas/node/nodetest1/npm-debug.log npm ERR! not ok code 0 And sudo netstat -lnp does not return any matching port 80's: [lucas@ecoinstance]~/node/nodetest1$ sudo netstat -lnp [48/648] Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Progr am name tcp 0 0 127.0.0.1:27017 0.0.0.0:* LISTEN 29160/mon god tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 1976/sshd tcp6 0 0 :::22 :::* LISTEN 1976/sshd udp 0 0 0.0.0.0:49948 0.0.0.0:* 1604/dhcl ient udp 0 0 0.0.0.0:68 0.0.0.0:* 1604/dhcl ient udp 0 0 10.240.241.116:123 0.0.0.0:* 2076/ntpd udp 0 0 127.0.0.1:123 0.0.0.0:* 2076/ntpd udp 0 0 0.0.0.0:123 0.0.0.0:* 2076/ntpd udp6 0 0 :::12151 :::* 1604/dhcl ient udp6 0 0 :::123 :::* 2076/ntpd Active UNIX domain sockets (only servers) Proto RefCnt Flags Type State I-Node PID/Program name Path unix 2 [ ACC ] STREAM LISTENING 405680 22814/ssh-agent /tmp/ssh-K dkxJfFLpKTC/agent.22813 unix 2 [ ACC ] STREAM LISTENING 408230 24049/ssh-agent /tmp/ssh-o fUeNNEwAqtP/agent.22243 unix 2 [ ACC ] STREAM LISTENING 416227 29160/mongod /tmp/mongo db-27017.sock unix 2 [ ACC ] SEQPACKET LISTENING 3692 284/udevd /run/udev/ control unix 2 [ ACC ] STREAM LISTENING 5318 1798/acpid /var/run/a cpid.socket unix 2 [ ACC ] STREAM LISTENING 16170 5177/tmux /tmp//tmux -1000/default unix 2 [ ACC ] STREAM LISTENING 414450 28213/dbus-daemon /var/run/d bus/system_bus_socket unix 2 [ ACC ] STREAM LISTENING 404225 22324/1 /tmp/ssh-9 TlDmu4bjl/agent.22324

  Read the article

• Ethernet interface number changed, and old one does not exist, but does not leave IP address

  - by Sagar

  I have a virtual machine with Mandriva 2007.0 (yes, old - unfortunately we do not have a choice here). Anyway, the problem: Before reboot: active network interface = eth0. No other interfaces present, and network manager confirms this. Static IP address set to 172.31.2.22. No issues, everything working properly, routing et al. -------Reboot--------- After reboot: active network interface = eth1, with a DHCP address. Network manager shows eth0 as disconnected, and not connectable. When I try to set eth1 up with the static IP address (same one), it says "In Use". I then tried ifconfig eth0 172.31.2.29 just to free it up from the eth0 interface so I could use it with eth1 (since this is connected). Result: ifconfig eth0 172.31.2.29 SIOCSIFADDR: No such device eth0: unknown interface: No such device Nothing else changed. Any ideas what could be happening, or at least how I can get my IP address back?

  Read the article

• Static IP for dynamic IP

  - by scape279

  I have a dynamic IP address. I would like to have a static IP, but Virgin Media don't allow static IPs for residential broadband services, even if you ask them really nicely and offer to pay for it without switching to a business tariff. I am already registered with a dynamic DNS service which is updated by my router eg me.example.com will always resolve to my dynamic IP. This is fine for some circumstances, but not if you can only enter an IP address into configuration files/hardware etc like firewalls, subversion services etc etc. Is there a way I can have a static IP address 'forwarding' to my dynamic IP? Would a possible solution involve tunnelling? Setting up a private proxy? Please note the following: I am able to buy an IP address from my web host. I have access to a webserver and I am able to create custom DNS zones. I'm happy to have a webserver running at home if necessary also. I do not wish to change broadband providers. I have zero control over the services that require the IP address entering so I cannot tackle the problem that way round (services I need to access are at work). PS I've tried googling this issue, but it is very difficult to search for as most results are related to dynamic dns (which I already have set up and isnt quite what I'm after)

  Read the article

• access an IP restricted service from a dynamic IP (Broadband modem) on a windows machine

  - by Joel Alenchery

  Hi, I dont know if this is the correct place to ask this question but here goes .. (please note that I am pretty much a newbie in terms of networking and I work primarily on the windows platform) I have been working on accessing and consuming some web services in C#/ASP.Net, these web services that I consume are IP restricted. Currently they allow access only from my work network (we have a static ip set up through which all our internet requests are routed). Every now and then we have people who go out and about and are stuck with using a usb dongle based internet connection and hence are not able to now access these web services that they are working on. What I would like to do is to provide some way for these remote workers to access the IP restricted web services using the static ip at our office. For example when the remote worker tries to access a service say http://exampleService.com .. the request gets routed to some box at our office and then out to the actual service. That way the service always sees the static ip of the office and not the dynamic ip that the remote user is actually using. I have done a fair bit of googling and its difficult to search for it as most of the results come back for dynamic DNS which is not really what I am looking for. I have also looked at a couple of posts on here namely Accessing IP restricted server from dynamic IP which does provide some insight but the fellow seems to have access to the source that does the ip restriction and is able to change the restrictions. In my case i dont have that access. another one that looked interesting was Static IP for dynamic IP the first answer seems exactly what I need but I dont know how I would go about doing the same on a windows machine. any help would be really appreciated. (am sorry about being soo noob-ish) PS: Right now everyone is using RDC/LogMeIn to access an internet connected machine in the office to manually check the webservice and getting work done. Which is a very tedious process.

  Read the article

• access an IP restricted service from a dynamic IP (Broadband modem) on a windows machine

  - by Joel Alenchery

  Hi, I dont know if this is the correct place to ask this question but here goes .. (please note that I am pretty much a newbie in terms of networking and I work primarily on the windows platform) I have been working on accessing and consuming some web services in C#/ASP.Net, these web services that I consume are IP restricted. Currently they allow access only from my work network (we have a static ip set up through which all our internet requests are routed). Every now and then we have people who go out and about and are stuck with using a usb dongle based internet connection and hence are not able to now access these web services that they are working on. What I would like to do is to provide some way for these remote workers to access the IP restricted web services using the static ip at our office. For example when the remote worker tries to access a service say http://exampleService.com .. the request gets routed to some box at our office and then out to the actual service. That way the service always sees the static ip of the office and not the dynamic ip that the remote user is actually using. I have done a fair bit of googling and its difficult to search for it as most of the results come back for dynamic DNS which is not really what I am looking for. I have also looked at a couple of posts on here namely http://serverfault.com/questions/187231/accessing-ip-restricted-server-from-dynamic-ip which does provide some insight but the fellow seems to have access to the source that does the ip restriction and is able to change the restrictions. In my case i dont have that access. another one that looked interesting was http://serverfault.com/questions/136806/static-ip-for-dynamic-ip the first answer seems exactly what I need but I dont know how I would go about on a windows machine. any help would be really appreciated. (am sorry about being soo noob-ish) PS: Right now everyone is using RDC/LogMeIn to access an internet connected machine in the office to manually check the webservice and getting work done. Which is a very tedious process.

  Read the article

• Bind an ip address to Postfix as outgoing ip

  - by jack

  Is that possible to bind all available public ip addresses on a server to one Postfix instance as its outgoing ip pool and let it choose a random ip or specified ip from the pool each time it sends out an email? If above is not possible, can it be configured to listen on one public ip address per instance and each time it delivers a message, it use the binded one as outgoing ip address.

  Read the article

• Port forward to different port number

  - by ThatGuyYouKnow

  I have a router that sets up rules like so: TCP Any -> 5800 Any -> 5900 UDP Any -> 5800 Any -> 5900 Computer: ip-address This would allow someone 'outside' to connect to my router's port 5800 and 5900 and forward that to the same port on my computer. My issue is that I want the 'outside' port to be different without changing the port on my computer.

  Read the article

• Watchguard firebox: public IP addresses behind firewall with as much usable IP addresses as possible

  - by martinezpt

  Our ISP assigned us 16 public IP addresses that we want to assign to hosts behind a Watchguard firebox x750e. The IP addresses are: x.x.x.176/28 of which x.x.x.177 is the gateway. The hosts will be running software that needs to be directly assigned the public IP address so 1:1 NAT is not an option. I found this document that gives examples on how to assign public IP addresses to hosts behind the firewall, using an optional interface: http://www.watchguard.com/help/configuration-examples/public_IP_behind_XTM_configuration_example_(en-US).pdf However, I can't implement scenario 1 as it won't allow me to use the same subnet on both interfaces. As for scenario 2, splitting the address range into 2 subnets will decrease the usable hosts on the optional interface to 5 (8 - network - broadcast - optional interface ip). I'm convinced that there must be a better way to address this problem and maximize the number of usable IP addresses but I'm not very familiar with this specific firewall. Are there any suggestions on how to keep the hosts behind the firewall with public IP addresses while maximizing the usable IP addresses? thanks

  Read the article

• Getting USB Wifi device to work

  - by Lolwhites

  I have been trying to get an Olitec Wifi N USB dongle to work. At first it lit up but wouldn't connect. A little Googling suggested that it would need ndiswrapper to make it work. After installing and trying to add driver with ndisgtk, I got the error message FATAL: Module ndiswrapper not found., but the driver appears in the list of currently installed ones anyway. However, the situation appears even worse: The USB device doesn't even light up (which it does when plugged into my netbook), suggesting the thing isn't detected any more. How to I go about resolving this issue? I've tried uninstalling ndiswrapper but there seems to have been some permanent change as the device is still not lighting up, as it did at first. Edit: Contents of /etc/modprobe.d/ndiswrapper.conf alias usb:v04F2pAFF7d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v04F2pAFF8d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v04F2pAFF9d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v04F2pAFFAd*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v04F2pAFFBd*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v04F2pAFFCd*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v050Dp1102d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v050Dp2102d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v050Dp2103d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0586p341Fd*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v06F8pE033d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v07AAp0056d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v07B8p8178d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v07B8p8189d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0B05p17ABd*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0BDAp8170d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0BDAp8176d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0BDAp8177d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0BDAp8178d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0BDAp817Ad*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0BDAp817Bd*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0BDAp817Cd*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0BDAp817Ed*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0BDAp817Fd*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0BDAp8186d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0BDAp8192d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0BFFp8160d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0DF6p0052d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0DF6p005Cd*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0DF6p0061d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0EB0p9071d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v103Cp1629d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v13D3p3357d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v13D3p3358d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v13D3p3359d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v2001p3307d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v2001p3308d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v2001p3309d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v2001p330Ad*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v2019p1201d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v2019p4902d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v2019p4903d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v2019p4904d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v2019pAB2Ad*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v2019pAB2Bd*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v2019pAB2Cd*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v2019pAB2Ed*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v2019pED17d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v20F4p624Dd*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v20F4p648Bd*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v20F4p664Bd*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v4855p0090d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v4855p0091d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v4856p0091d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v7392p7811d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v7392p7822d*dc*dsc*dp*ic*isc*ip* ndiswrapper

  Read the article

• Rerouting traffic from port 80 to another port on a single ip

  - by zam

  I have a server with multiple IP addresses associated with it. I'm trying to run a node.js web server (which I do not want to run as root), using only one of those ip addresses (it would be very bad if the traffic from all the ip addresses were forwarded). Through searching superuser, it looked like this could be possible with iptables: How to setting up iptables for traffic fowarding on port 80 from specific sources iptables -A PREROUTING -t nat -i eth0 -p tcp --dport 80 --source 212.333.111.222 -j REDIRECT --to-port 9020 However, I do not understand why eth0 is needed. According to: http://blog.softlayer.com/2011/iptables-tips-and-tricks-port-redirection/ this could be done with: iptables -t nat -A PREROUTING -p tcp --dport 2525 -j REDIRECT --to-ports 25 What is the correct way of forwarding traffic from a single ip on port 80, lets say 111.111.111.111:80 to another port on the same server, lets say 111.111.111.111:8765? thanks for your help!

  Read the article

• multiple ip for a server not reachable

  - by andrewk

  FYI: I've read everything on Serverfault related to this question and have faced a different issue. Simply put, I've got one server (apache2) with couple of sites on it. It currently has 1 ip. I'm trying to assign/add another ip to that server, so I can give each site a different ip for ssl purposes. I am not lucking out. The new ip simply is unreachable, I've pinged it. This is what I've got below, what am I doing wrong. auto lo iface lo inet loopback auto eth0 eth0:0 eth0:1 iface eth0 inet static address 70.116.5.244 netmask 255.255.255.0 gateway 70.116.5.1 #THE NEW IP iface eth0:0 inet static address 26.175.217.102 netmask 255.255.255.0 #PRIVATE IP iface eth0:1 inet static address 192.168.158.88 netmask 255.255.128.0 NOTE: THESE IP'S ARE TWEAKED BUT RELATIVE I've read many questions here 90% similar to this but most actually have the IP respond, not this case. Thanks netstar -r output Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface default gw-u6.linode.co 0.0.0.0 UG 0 0 0 eth0 70.116.5.0 * 255.255.255.0 U 0 0 0 eth0 26.175.217.0 * 255.255.255.0 U 0 0 0 eth0 192.168.128.0 * 255.255.128.0 U 0 0 0 eth0

  Read the article

• Simple options for port forwarding to a different port?

  - by Nick

  I have three network printers at our local office, all of which listen on port 9100. Non of them offer the option of changing the listening port. We have a single public static IP address, and access to our main network is through a Linksys WRT-54G. We need to be able to print to these printers from outside the office. The problem is, with the 54G, I can only forward a port to the SAME port on a particular IP address. What I really need though is a way to forward to an ip address and a DIFFERENT port. I need to do this: In port Destination 9100 192.168.1.1 : 9100 9101 192.168.1.2 : 9100 9102 192.168.1.3 : 9100 So I'm looking for options. I could setup an old computer with two network cards and IPtables I suppose, but that seems like a lot of overhead for something relatively simple. Is there a way a virtual machine (read: one network card) could do the advanced port forwarding? Where I forward all traffic to it, and it forwards it on to the right printer? Or what about those mini Linux distros that replace the WRT-54G's firmware? Do any of those support what I need "out of the box"? I have a spare WRT- could I make it an IP tables router? Recommendations for mini distros? Or is there an off-the-shelf product that does this (cheap/local preferred)? Any advice / options appreciated. Thanks!

  Read the article

• IP alias lost when changing main IP

  - by rmflow

  my /etc/network/interfaces: auto eth0 iface eth0 inet static address 192.168.3.75 netmask 255.255.255.0 gateway 192.168.3.0 Situation 1: After linux booted I set an IP alias: ifconfig eth0:0 192.168.3.111 Now ifconfig reports two IP addresses 192.168.3.75 at eth0 and 192.168.3.111 at eth0:0 When I change main IP to another network: ifconfig eth0 192.168.1.111 the alias eth0:0 is lost! Situation 2: After linux booted I set an IP alias: ifconfig eth0:0 192.168.4.111 Now ifconfig reports two IP addresses 192.168.3.75 at eth0 and 192.168.4.111 at eth0:0 When I change main IP to another network: ifconfig eth0 192.168.1.111 the alias eth0:0 stays! How do I properly change main IP, so all my aliases are not lost?

  Read the article

• Redirecting access from a domain name to IP:port

  - by hexacyanide

  Right now I have a server running on IP:Port. If I wanted to use DNS but redirect to the port, how would I do so? I've heard that it's possible, but how would I do so, even if it includes creating something such as a proxy? For example, visiting: domain.tld would instead access IP:Port and the port could be anything I wanted it to be. If no direct solution exist, how would I go along using a "VirtualHost"?

  Read the article

• Errors when switching to specific static IP

  - by michaelc

  I had a Fedora box running using my static IP 69.169.136.6, etc, all configured according to what the ISP required. Just recently the hard drive failed (and I should have been keeping better backups) - while it is being recovered I would like to put up a webpage on my Archlinux PC explaining the problem - I presently do not have sufficient access to change the DNS record assigned to the domain. When I change my ip address while my system is running to 69.169.136.6, ifconfig reports the new ip address, but http://whatismyip.com/ does not. When I change it and reboot, I can't ping - the message I recieve is "connect: Network is unreachable" (when given one of google.com 's IP addresses - hostnames give me ping: unknown host xxx). Until I have access to the DNS system, what can I do to make this work? Edit: With new IP address, same problem, IP is now 69.169.136.29. Some commands might be useful: #ping 69.169.136.1 PING 69.169.136.1 (69.169.136.1) 56(84) bytes of data. 64 bytes from 69.169.136.1: icmp_seq=1 ttl=64 time=0.377 ms #ping 69.169.190.211 connect: Network is unreachable #ping 208.72.160.67 connect: Network is unreachable #ifconfig eth0 Link encap:Ethernet HWaddr 00:E0:4D:97:23:9B inet addr:69.169.136.29 Bcast:69.169.137.255 Mask:255.255.254.0 inet6 addr: fe80::2e0:4dff:fe97:239b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:132091 errors:0 dropped:0 overruns:0 frame:0 TX packets:17 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:9635179 (9.1 Mb) TX bytes:1322 (1.2 Kb) Interrupt:29 Base address:0x6000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:48 errors:0 dropped:0 overruns:0 frame:0 TX packets:48 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2480 (2.4 Kb) TX bytes:2480 (2.4 Kb) #ip route 69.169.136.0/23 dev eth0 proto kernel scope link src 69.169.136.29 #cat /etc/resolv.conf # Generated by dhcpcd #nameserver 208.67.222.222 #nameserver 208.67.220.220 nameserver 69.169.190.211 nameserver 208.72.160.67 # /etc/resolv.conf.tail can replace this line Update: have new static IP addresses, verified to work in Windows... Relevant portions of /etc/rc.conf below: #Static IP example #eth0="eth0 69.169.136.6 netmask 255.255.254.0 broadcast 69.169.136.1" #eth0="eth0 69.169.136.29 netmask 255.255.254.0 broadcast 69.169.137.255" eth0="eth0 69.169.136.32 netmask 255.255.254.0 broadcast 69.169.137.255" #eth0="dhcp" INTERFACES=(eth0) # Routes to start at boot-up (in this order) # Declare each route then list in ROUTES # - prefix an entry in ROUTES with a ! to disable it # #gateway="default gw 192.168.0.1" gateway="default gw 69.169.136.1" #gateway="69.169.136.1" ROUTES=(!gateway) #ROUTES=()

  Read the article

• VRF Internet Gateway Multiple External IP's 1 Internal IP to AWS

  - by user223903

  Trying to setup VRF for the first time and its not working for me even though I keep reading everything online. IP's are different to real life. I have an Internet connection which I can ping to my router in the current setup below 195.45.73.22 I have a block of ip addresses 195.45.121.0/27 I want to setup multiple VPN's to AWS so need to have multiple external ip's thus the block of IP addresses. I have setup the 2nd and 3rd IP address but can not ping them from external. Any help would be grateful. Bryan ip source-route ! ip vrf Internet rd 1:1 route-target export 1:1 route-target import 1:1 ip vrf AWSSydney1 rd 2:2 route-target export 2:2 route-target import 2:2 route-target import 1:1 ip vrf AWSSydney2 rd 3:3 route-target export 3:3 route-target import 3:3 route-target import 1:1 ip cef no ip domain lookup no ipv6 cef multilink bundle-name authenticated interface FastEthernet0/0 description Vocus Internet no ip address speed 100 full-duplex interface FastEthernet0/0.1 encapsulation dot1Q 1 native ip address 195.45.73.22 255.255.255.252 interface FastEthernet0/0.2 encapsulation dot1Q 2 ip vrf forwarding AWSSydney1 ip address 195.45.121.1 255.255.255.224 interface FastEthernet0/0.3 encapsulation dot1Q 3 ip vrf forwarding AWSSydney2 ip address 195.45.121.2 255.255.255.224 interface FastEthernet0/1 description LAN_SIDE ip address 10.0.0.5 255.255.255.0 speed 100 full-duplex no mop enabled ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 195.45.73.21 ip route vrf Internet 0.0.0.0 0.0.0.0 195.45.73.21

  Read the article

• Port forwarding to asp.net development server

  - by ile

  I have configured my router so that I can access my localhost from internet. But I can't manage to port forward it to asp.net development server. In router's port forwarding I did the same thing as for the localhost but only changed port number so that it is the same as the one that is assigned to my application, but this doesn't work. Any idea how to get it work? Thanks in advance, Ile

  Read the article

• Server can't set IP after power outage

  - by Ali

  The power went out all of a sudden and when we tried to restart everything when it came back on - our server can't be assigned an IP? We got an error stating that the IP for the server was already in use by another system. We then shut down all systems and restarted the server but then for some reason the server was assigned an IP but no one could connect to it - after restarting the server after setting it to have a dynamically assigned ip - the server now has no ip - just 0.0.0.0 - running an ipconfig/renew or ipconfig /release has no effect.. what should we do!!

  Read the article

• how to setup sonicwall tz210 to port forward packets received from external ip to another external ip

  - by lplp

  i have a sonicwall tz210 on a fixed ip, say ip1. And then i have, let's say a legacy server, with external ip ip2, which sends data to ip1 (and I have another server on ip1 behind the sonicwall which receives and processes that data). I would like to set up a new server on a different external ip ip3 that will receive and process data from the legacy server. How can I setup the sonicwall so that the packets received from the legacy server (from an external ip) are port forwarded to the external ip address ip3?

  Read the article

• Finding all IP ranges blelonging to a specific ISP

  - by Jim Jim

  I'm having an issue with a certain individual who keeps scraping my site in an aggressive manner; wasting bandwidth and CPU resources. I've already implemented a system which tails my web server access logs, adds each new IP to a database, keeps track of the number of requests made from that IP, and then, if the same IP goes over a certain threshold of requests within a certain time period, it's blocked via iptables. It may sound elaborate, but as far as I know, there exists no pre-made solution designed to limit a certain IP to a certain amount of bandwidth/requests. This works fine for most crawlers, but an extremely persistent individual is getting a new IP from his/her ISP pool each time they're blocked. I would like to block the ISP entirely, but don't know how to go about it. Doing a whois on a few sample IPs, I can see that they all share the same "netname", "mnt-by", and "origin/AS". Is there a way I can query the ARIN/RIPE database for all subnets using the same mnt-by/AS/netname? If not, how else could I go about getting every IP belonging to this ISP? Thanks.

  Read the article

• Port Forwarding a Specific Port (e.g. 22)

  - by Jerry Blair

  I'm still confused about establishing an SSH connection (port 22) between two computers on different internal networks. For example: I am on my computer with internal IP address IIP-1, connected to my router RT-1. There are 10 IIPs connected to RT-1. I want to establish an SSH connection to IIP-3 which is connected to router RT-2. There are 10 IIPs connected to RT-2. At any time, there can be multiple SSH connections between IIPs on RT-1 and RT-2. Since I only have port 22 available, I don't know which SSH session is talking between which IIPs. I looked at a couple of similar questions but am still unclear on the solution. Thanks much, Jerry

  Read the article

• Blocking an IP range without using .htaccess

  - by Chris

  I have a WordPress blog that I am hosting using NearlyFreeSpeech.net. Recently, Russians found it and have been comment spamming me. I don't want to have to trash 30+ Cyrillic comments/day, and I don't want to pay for that bandwidth either. I did a little research, and all the commentors are originating from RIPE delegated IP ranges. Because my blog can only interest people living in the American Southeast, I figured the quick and dirty solution would be to use .htaccess to deny connections coming from 62.0.0.0/8 and 80.0.0.0/8 - 91.0.0.0/8. I wrote a .htaccess file that did just this, but the Russians were still getting through! According to NearlyFreeSpeech.net's FAQ, they can't support IP blocking through .htaccess (dirt cheap hosting comes with a price). I can block comments by IP through Wordpress (I think), but I can't figure out a way to block IP ranges or wildcards. Does anybody know of any other way?

  Read the article

• IP failover with 2 nodes on different subnet: cannot ping virtual IP from second node?

  - by quanta

  I'm going to setup redundant failover Redmine: another instance was installed on the second server without problem MySQL (running on the same machine with Redmine) was configured as master-master replication Because they are in different subnet (192.168.3.x and 192.168.6.x), it seems that VIPArip is the only choice. /etc/ha.d/ha.cf on node1 logfacility none debug 1 debugfile /var/log/ha-debug logfile /var/log/ha-log autojoin none warntime 3 deadtime 6 initdead 60 udpport 694 ucast eth1 node2.ip keepalive 1 node node1 node node2 crm respawn /etc/ha.d/ha.cf on node2: logfacility none debug 1 debugfile /var/log/ha-debug logfile /var/log/ha-log autojoin none warntime 3 deadtime 6 initdead 60 udpport 694 ucast eth0 node1.ip keepalive 1 node node1 node node2 crm respawn crm configure show: node $id="6c27077e-d718-4c82-b307-7dccaa027a72" node1 node $id="740d0726-e91d-40ed-9dc0-2368214a1f56" node2 primitive VIPArip ocf:heartbeat:VIPArip \ params ip="192.168.6.8" nic="lo:0" \ op start interval="0" timeout="20s" \ op monitor interval="5s" timeout="20s" depth="0" \ op stop interval="0" timeout="20s" \ meta is-managed="true" property $id="cib-bootstrap-options" \ stonith-enabled="false" \ dc-version="1.0.12-unknown" \ cluster-infrastructure="Heartbeat" \ last-lrm-refresh="1338870303" crm_mon -1: ============ Last updated: Tue Jun 5 18:36:42 2012 Stack: Heartbeat Current DC: node2 (740d0726-e91d-40ed-9dc0-2368214a1f56) - partition with quorum Version: 1.0.12-unknown 2 Nodes configured, unknown expected votes 1 Resources configured. ============ Online: [ node1 node2 ] VIPArip (ocf::heartbeat:VIPArip): Started node1 ip addr show lo: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet 192.168.6.8/32 scope global lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever I can ping 192.168.6.8 from node1 (192.168.3.x): # ping -c 4 192.168.6.8 PING 192.168.6.8 (192.168.6.8) 56(84) bytes of data. 64 bytes from 192.168.6.8: icmp_seq=1 ttl=64 time=0.062 ms 64 bytes from 192.168.6.8: icmp_seq=2 ttl=64 time=0.046 ms 64 bytes from 192.168.6.8: icmp_seq=3 ttl=64 time=0.059 ms 64 bytes from 192.168.6.8: icmp_seq=4 ttl=64 time=0.071 ms --- 192.168.6.8 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3000ms rtt min/avg/max/mdev = 0.046/0.059/0.071/0.011 ms but cannot ping virtual IP from node2 (192.168.6.x) and outside. Did I miss something? PS: you probably want to set IP2UTIL=/sbin/ip in the /usr/lib/ocf/resource.d/heartbeat/VIPArip resource agent script if you get something like this: Jun 5 11:08:10 node1 lrmd: [19832]: info: RA output: (VIPArip:stop:stderr) 2012/06/05_11:08:10 ERROR: Invalid OCF_RESK EY_ip [192.168.6.8] http://www.clusterlabs.org/wiki/Debugging_Resource_Failures Reply to @DukeLion: Which router receives RIP updates? When I start the VIPArip resource, ripd was run with below configuration file (on node1): /var/run/resource-agents/VIPArip-ripd.conf: hostname ripd password zebra debug rip events debug rip packet debug rip zebra log file /var/log/quagga/quagga.log router rip !nic_tag no passive-interface lo:0 network lo:0 distribute-list private out lo:0 distribute-list private in lo:0 !metric_tag redistribute connected metric 3 !ip_tag access-list private permit 192.168.6.8/32 access-list private deny any

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >