Search Results

Search found 15 results on 1 pages for 'jfs'.

Page 1/1 | 1 

  • Poor write performance on Debian server running NFS with 22TB exported JFS filesystem

    - by user143546
    I am currently running a debian server that is exporting a large JFS filesystem (22TB) over NFS (nfs-kernel-server.) When attempting to write to the NFS share, the performance is very poor. The 22TB disk is sitting on a NAS mounted using iSCSI. It will bust for a moment near expected line speed, and then sit idle for several seconds. Very little traffic measured in the low kb/sec. The wait peeks on write. When reading from the NFS mount, the system operates at expected speeds (11MB/sec). The issue does not occur when using SFTP, rsync, or local coping (non-nfs). The issue persists between stable and testing releases. On the same machine I have a 14TB ext4 filesystem using the exact same export configuration that does not share the issue. This share is not in regular use and thus not consuming resources. NFS Server: cat /etc/exports /data2 10.1.20.86(rw,no_subtree_check,async,all_squash) cat /sys/block/sdb/queue/scheduler noop [deadline] cfq cat /etc/default/nfs-kernel-server RPCNFSDCOUNT=8 RPCNFSDPRIORITY=0 RPCMOUNTDOPTS=--manage-gids NEED_SVCGSSD= RPCSVCGSSDOPTS= NFS Client: cat /etc/fstab 10.1.20.100:/data2 /root/incoming nfs rw,noatime,soft,intr,noacl 0 2 cat /sys/block/sdb/queue/scheduler noop [deadline] cfq cat /proc/mounts 10.1.20.100:/data2/ /root/incoming nfs4 rw,noatime,vers=4,rsize=262144,wsize=262144,namlen=255,soft,proto=tcp,port=0,timeo=600,retrans=2,sec=sys,clientaddr=10.1.20.86,minorversion=0,addr=10.1.20.100 0 0 This problem has me pretty stumped. Any help would be greatly welcomed. Thanks.

    Read the article

  • Is this valid JFS partition?

    - by Coolmax
    This is my first question on StackExchange. My teacher gave my his laptop (with Fedora 16 on it) and compact flash card with data. He want to have access to files on card, but he couldn't get access to it. The problem is Linux don't know what type of partion is. I suppose there is JFS: root@debian:~# dmesg |grep sdc [ 9066.908223] sd 3:0:0:1: [sdc] 3940272 512-byte logical blocks: (2.01 GB/1.87 GiB) [ 9066.962307] sd 3:0:0:1: [sdc] Write Protect is off [ 9066.962310] sd 3:0:0:1: [sdc] Mode Sense: 03 00 00 00 [ 9066.962312] sd 3:0:0:1: [sdc] Assuming drive cache: write through [ 9067.028420] sd 3:0:0:1: [sdc] Assuming drive cache: write through [ 9067.028637] sdc: unknown partition table [ 9067.097065] sd 3:0:0:1: [sdc] Assuming drive cache: write through [ 9067.097281] sd 3:0:0:1: [sdc] Attached SCSI removable disk and some of data: root@debian:~# hexdump -Cn 65536 /dev/sdc 00000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 00008000 4a 46 53 31 01 00 00 00 48 63 0e 00 00 00 00 00 |JFS1....Hc......| 00008010 00 10 00 00 0c 00 03 00 00 02 00 00 09 00 00 00 |................| 00008020 00 20 00 00 00 09 20 10 02 00 00 00 00 00 00 00 |. .... .........| 00008030 04 00 00 00 26 00 00 00 02 00 00 00 24 00 00 00 |....&.......$...| 00008040 41 03 00 00 16 00 00 00 00 02 00 00 a0 cc 01 00 |A...............| 00008050 37 00 00 00 69 cc 01 00 b6 d8 ac 4b 00 00 00 00 |7...i......K....| 00008060 32 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 |2...............| 00008070 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 00008080 00 00 00 00 00 00 00 00 90 15 e5 5f e3 c4 45 fa |..........._..E.| 00008090 9d 6a 5c b5 4f da 62 1a 00 00 00 00 00 00 00 00 |.j\.O.b.........| 000080a0 00 00 00 00 00 00 00 00 c3 c9 01 00 ed 81 00 00 |................| 000080b0 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 000080c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * [cut] * 0000f000 4a 46 53 31 01 00 00 00 48 63 0e 00 00 00 00 00 |JFS1....Hc......| 0000f010 00 10 00 00 0c 00 03 00 00 02 00 00 09 00 00 00 |................| 0000f020 00 20 00 00 00 09 20 10 00 00 00 00 00 00 00 00 |. .... .........| 0000f030 04 00 00 00 26 00 00 00 02 00 00 00 24 00 00 00 |....&.......$...| 0000f040 41 03 00 00 16 00 00 00 00 02 00 00 a0 cc 01 00 |A...............| 0000f050 37 00 00 00 69 cc 01 00 b6 d8 ac 4b 00 00 00 00 |7...i......K....| 0000f060 32 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 |2...............| 0000f070 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 0000f080 00 00 00 00 00 00 00 00 90 15 e5 5f e3 c4 45 fa |..........._..E.| 0000f090 9d 6a 5c b5 4f da 62 1a 00 00 00 00 00 00 00 00 |.j\.O.b.........| 0000f0a0 00 00 00 00 00 00 00 00 c3 c9 01 00 ed 81 00 00 |................| 0000f0b0 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 0000f0c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 00010000 I'm total newbie to filesystems. I googled and found that JFS superblock may starts on 0x8000 offset. But what next? How to mount this card? If there would be normal partition table I would expect 55 AA on 510th and 511th byte, but first 8000 bytes are clear. Any help would be greatly appreciated. And sorry for my bad english :) Kind regards.

    Read the article

  • changing filesystem format from xfs to ext4 without losing data

    - by A.Rashad
    I have a fresh Lucid Lynx (Ubuntu 10.04) running on a laptop. where I defined the filesystems as: mount point / on ext4 (46 Gb) mount point /home on jfs (63 GB) swap as 3 Gb I left the machine over night to do some task, without AC power supply. next day in the morning I found it on standby, task completed, but filesystem was not reachable. it gave me I/O error it seems that there is a problem with jfs and standby. anyways, to avoid any hassle, I want to move this mount point from jfs format to ext4. can I do this without losing data and without the need to place the data in a temporary location until transformation is done? sorry to mention that, but I recall back in the windows days, we would change a FAT16 to FAT32 or a FAT32 to NTFS without having to lose the data. I hope this is available on Linux. Update The /home filesystem was xfs not jfs, and it seems there is a bug with this filesystem for some reason, I had to re-install the OS twice until I ended up with ext4 for the entire / However, as a conclusion, it seems that there is no way to make a conversion

    Read the article

  • changing filesystem format from jfx to ext4 without losing data

    - by A.Rashad
    I have a fresh Lucid Lynx (Ubuntu 10.04) running on a laptop. where I defined the filesystems as: mount point / on ext4 (46 Gb) mount point /home on jfs (63 GB) swap as 3 Gb I left the machine over night to do some task, without AC power supply. next day in the morning I found it on standby, task completed, but filesystem was not reachable. it gave me I/O error it seems that there is a problem with jfs and standby. anyways, to avoid any hassle, I want to move this mount point from jfs format to ext4. can I do this without losing data and without the need to place the data in a temporary location until transformation is done? sorry to mention that, but I recall back in the windows days, we would change a FAT16 to FAT32 or a FAT32 to NTFS without having to lose the data. I hope this is available on Linux.

    Read the article

  • What is the best Linux filesystem for MySQL (InnoDB)?

    - by Continuation
    I tried to look for benchmark on the performances of various filesystems with MySQL InnoDB but couldn't find any. My database workload is the typical web-based OLTP, about 90% read, 10% write. Random IO. Among popular filesystems such as ext3, ext4, xfs, jfs, Reiserfs, Reiser4, etc. which one do you think is the best for MySQL?

    Read the article

  • Doing Time Limited Flight Recordings Using Start Up Parameters

    - by Marcus Hirt
    Just like with the old JRockit Runtime Analyzer, it is possible to start up recordings using command line parameters to JRockit. The parameter is called -XX:StartFlightRecording in R28. Below is an example that starts a flight recording half a minute after the JVM has been started. The recording will last for a minute. The name when viewing the ongoing recordings will be MyRecording, and the resulting file will be written to C:\tmp\myrecording.jfr. The recording will use the settings in jre\lib\jfr\profile.jfs. -XX:StartFlightRecording=delay=30s,duration=60s,name=MyRecording,filename=C:\tmp\myrecording.jfr,settings=profile For more information, see the JRockit R28 command line parameter documentation.

    Read the article

  • Is it possible to programatically catch JavaScript SyntaxErrors?

    - by Matty
    I don't think that this is doable, but wanted to throw it out to the community to confirm my suspicions. Let's say you're writing a program in another language like Python, PHP, or ASP. This program is intended to build another program written in JavaScript. However, the first program is unfortunately not immune to errors. So, occasionally, the program which builds the JavaScript program does some funky stuff and outputs a syntax error in the JavaScript source. Now some user goes and loads the program and it essentially halts, because the web browser running it can't properly parse the JavaScript. This user is probably not going to be happy. I wouldn't be. This brings me to my question. Is it possible to write an error handler that would catch these kind of syntax problems allowing the application to fail gracefully? Here's an example: <html> <head> <script type="text/javascript" charset="utf-8"> window.onerror = errorHandler; function errorHandler(a,b,c) { alert('horray! No wait, Booo!'); } vara jfs; </script> </head> <body> Can this be done? </body> </html> or <html> <head> <script type="text/javascript" charset="utf-8"> try { vara jfs; } catch (e) { alert('horray! No wait, Booo!'); } </script> </head> <body> Can this be done? </body> </html>

    Read the article

  • Load Average runaway

    - by mewrei
    Is there any way to chase down lockups and runaway load averages? Every so often (pretty randomly) I'll get my load average spike up over 5 usually to around 10-15 and sometimes as high as 75 (dual core machine), and cause my system to lock for an indeterminate amount of time. The only thing I can possibly chase it to is using nVidia fakeraid (RAID-1) with JFS on top of that for my /home partition. Also I noticed that when my load averages spike, the power management system doesn't step up my processor speed from 1.6 to its maximum 2.13Ghz clock speed (not sure if this makes a huge difference with this problem). Any ideas?

    Read the article

  • CORAID using only 1 of the 2 available NICs for AoE traffic

    - by Peter Carrero
    We got 6 CORAID shelves in my workplace. On 2 of them I see AoE traffic on only 1 of the 2 NICs that are attached to the SAN switch. We got jumbo frames enabled on all devices. Both NICs show up when I issue the aoe-interfaces command. This wouldn't bother me too much if the throughput performance observed on the "bad" shelves using bonnie++ wasn't half of the result of the "good" shelves. The "good" shelves are older SR1521 model and they have ReiserFS on their LUNS - not that I think it makes a difference - and the "bad" shelves are newer SR2421 model and have JFS. Any help as to what is going on and how to rectify this would be greatly appreciated. BTW: even the lower performing shelves outperform another iSCSI device we got, but that is another story... Thanks.

    Read the article

  • UDF filesystem -> Maximum number of files

    - by user978122
    I am considering partitioning a rather large hard drive with the UDF filesystem for an experiment, and would like to ask if anyone knows the maximum number of files, either by directory, or as a whole, that the UDF filesystem can handle? For some background, I looked at the JFS and XFS filesystems (NTFS has a limitation of the number of files per volume); however, since I run Windows, that's kind of out. UFD, on the other hand, does not appear to have these limitations, but then, I cannot really find any information on just how many files per volume the UDF file system supports.

    Read the article

  • Ubuntu 12.04 - syslog showing "SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled"

    - by Tom G
    I have been seeing these random logs in syslog on our production system. There is no XFS setup. Fstab only shows local partitions, only EXT3 . There is nothing in crontabs either. The only file system related package I have installed is 'nfs-kernel-server' Kernel version is 3.2.0-31-generic . kernel: [601730.795990] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled kernel: [601730.798710] SGI XFS Quota Management subsystem kernel: [601730.828493] JFS: nTxBlock = 8192, nTxLock = 65536 kernel: [601730.897024] NTFS driver 2.1.30 [Flags: R/O MODULE]. kernel: [601730.964412] QNX4 filesystem 0.2.3 registered. kernel: [601731.035679] Btrfs loaded os-prober: debug: running /usr/lib/os-probes/mounted/10freedos on mounted /dev/vda1 10freedos: debug: /dev/vda1 is not a FAT partition: exiting os-prober: debug: running /usr/lib/os-probes/mounted/10qnx on mounted /dev/vda1 10qnx: debug: /dev/vda1 is not a QNX4 partition: exiting os-prober: debug: running /usr/lib/os-probes/mounted/20macosx on mounted /dev/vda1 macosx-prober: debug: /dev/vda1 is not an HFS+ partition: exiting os-prober: debug: running /usr/lib/os-probes/mounted/20microsoft on mounted /dev/vda1 20microsoft: debug: /dev/vda1 is not a MS partition: exiting os-prober: debug: running /usr/lib/os-probes/mounted/30utility on mounted /dev/vda1 30utility: debug: /dev/vda1 is not a FAT partition: exiting os-prober: debug: running /usr/lib/os-probes/mounted/40lsb on mounted /dev/vda1 debug: running /usr/lib/os-probes/mounted/70hurd on mounted /dev/vda1 debug: running /usr/lib/os-probes/mounted/80minix on mounted /dev/vda1 debug: running /usr/lib/os-probes/mounted/83haiku on mounted /dev/vda1 83haiku: debug: /dev/vda1 is not a BeFS partition: exiting os-prober: debug: running /usr/lib/os-probes/mounted/90bsd-distro on mounted /dev/vda1 83haikuos-prober: debug: running /usr/lib/os-probes/mounted/90linux-distro on mounted /dev/vda1 os-prober: debug: running /usr/lib/os-probes/mounted/90solaris on mounted /dev/vda1 os-prober: debug: /dev/vda2: is active swap Why would this randomly show up? This also spawns multiple "jfsCommit" processes.

    Read the article

  • What "file system" is supported by Windows and Linux?

    - by Skiroid
    I'm setting up a media centre for my living room so that I'm able to watch downloaded films and TV shows on the big screen. The media centre is an old small computer which will have XBMCbuntu 12 installed on it. Right now, the media centre has a 300 GB HDD partitioned into two: 1) Ext4 50 GB (where I'll install the OS) 2) swap 6 GB (swap area) I'm wanting a third partition which I can store all my media on to. This partition will fill the rest of my HDD. Although, I'm stuck on which file system I should set it to. I need the file system to be fully compatible with Windows as I'm going to be removing the HDD from the media centre and plugging it into my main PC, running Windows 8, to transfer the media onto it. I can't transfer over Wi-Fi as the media centre won't be connected to the Internet. My options are: Ext4 journaling, Ext3 journaling, Ext2 journaling, ReiserFS journaling, btrfs journaling, JFS journaling, XFS journaling, FAT16 and FAT32. I know that FAT32 is compatible with Windows but it can only hold files that are 4 GB or less and my films are well over 4 GB. Some more than 10 GB. Is there a file system I can use which is supported by Linux and pops up under Computer in Windows?

    Read the article

  • Using ext4 in VMware machine

    First of all, using a journaling filesystems like NTFS, ext4, XFS, or JFS (not to name all of them) is a very good idea and nowadays unthinkable not to do. Linux offers a good variety of different option as journaling filesystem for your system. Since years I am using SGI's XFS and I am pretty confident with stability, performance and liability of the system. In earlier years I had to struggle with incompatibilities between XFS and the boot loader. Using an ext2 formatted /boot solved this issue. But, wow, that is ages ago! Lately, I had to setup a fresh Lucid Lynx (Ubuntu 10.04 LTS) system for a change of our internal groupware / messaging system. Therefore, I fired up a new virtual machine with almost standard configuration in VMware Server and run through our network-based PXE boot and installation procedure. At a certain step in this process, Ubuntu asks you about the partitioning of your hard drive(s). Honestly, I have to say that only out of curiousity I sticked to the "default" suggestion and gave my faith and trust into the Ubuntu installation routine... Resulting to have an ext4 based root mount point ( / ). The rest of the installation went on without further concerns or worries. Note:I really can't remember why I chose to go away from my favourite... Well, it should turn out to be the wrong decision after all. Ok, let's continue the story about ext4 in a VMware based virtual machine. After some hours installing additional packages and configuring the new system using LDAP for general authentication and login, I had an "out-of-the-box" usable enterprise messaging system based on Zarafa 6.40 Community Edition inclusive proper SSL-based Webaccess interface and Z-Push extension for ActiveSync with my Nokia mobile. Straightforward and pretty nice for the time spent on the setup. Having priority on other tasks I let the system just running and didn't pay any further attention at all. Until I run into an upgrade of "Mail for Exchange" on Symbian OS. My mobile did not bother me at all with the upgrade and everything went smooth, but trying to re-establish the ActiveSync connection to the Zarafa messaging system resulted in a frustating situation. So, I shifted my focus back to the Linux system and I was amazed to figure out that the root had been remounted readonly due to hard drive failures or at least ext4 reported errors. Firing up Google only confirmed my concerns and it seems that using ext4 for VMware based virtual machines does not look like a stable and reliable candidate to me. You might consider reading those external resources: ext4 fs corruption under VMWare Server 2.01Bug #389555 - ext4 filesystem corruption Well, I learned my lesson and ext{2|3|4} based filesystems are not going to be used on any of my Linux systems or customer installations in the future. Addendum: I did not try this setup in other virtualization environments like VirtualBox, qemu, kvm, Xen, etc.

    Read the article

  • How do I install on an UEFI Asus 1215b netbook?

    - by Tarek
    I'm trying to install Ubuntu 11.10 on a UEFI netbook Asus 1215b using an USB stick. I created a fat32 efi partition of 100MB, 2GB swap, and 2 ext4 partitions (for root (/ ) and /home, respectively). While installing, Ubuntu switches to CLI and starts running efibootmgr. After a few commands (sadly I don't have a screen grab), it stops displaying text but it's still running judging by the HDD led. Then, there's a weird graphic glitch and the screen turns off (HDD led still indicating activity). Finally, it just stops, but doesn't turn off. Not even a hard reboot works (holding down the power button a few secs). I have to plug the netbook off and remove the battery. After that, it still doesn't boot Ubuntu... Anyway, what can I do? I'm considering following the footsteps here and here. Edit: here is the syslog $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] BUG: unable to handle kernel paging request at 00000000ffe1867c $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] IP: [<ffff880066d44c1f>] 0xffff880066d44c1e $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] PGD 14ecc067 PUD 0 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] Oops: 0000 [#1] SMP $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] CPU 0 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] Modules linked in: cryptd aes_x86_64 ufs qnx4 hfsplus hfs minix ntfs msdos xfs reiserfs jfs bnep parport_pc rfcomm dm_crypt ppdev bluetooth lp parport joydev eeepc_wmi asus_wmi sparse_keymap uvcvideo videodev v4l2_compat_ioctl32 snd_hda_codec_realtek snd_seq_midi snd_hda_codec_hdmi snd_hda_intel snd_hda_codec arc4 snd_rawmidi snd_hwdep psmouse snd_pcm snd_seq_midi_event ath9k serio_raw sp5100_tco i2c_piix4 k10temp snd_seq mac80211 snd_timer ath9k_common ath9k_hw snd_seq_device ath snd cfg80211 soundcore snd_page_alloc binfmt_misc squashfs overlayfs nls_iso8859_1 nls_cp437 vfat fat dm_raid45 xor dm_mirror dm_region_hash dm_log btrfs zlib_deflate libcrc32c usb_storage uas radeon video ahci libahci ttm drm_kms_helper drm wmi i2c_algo_bit atl1c $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] Pid: 28432, comm: efibootmgr Not tainted 3.0.0-12-generic #20-Ubuntu ASUSTeK Computer INC. 1215B/1215B $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] RIP: 0010:[<ffff880066d44c1f>] [<ffff880066d44c1f>] 0xffff880066d44c1e $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] RSP: 0018:ffff88005e2cbab0 EFLAGS: 00010082 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] RAX: 00000000ffe1867c RBX: 0000000000000009 RCX: 00000000ffe1867c $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] RDX: 0000000000000000 RSI: ffff88005e2cbbea RDI: ffff88005e2cbb40 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] RBP: 00000000ffe1867c R08: 0000000000000000 R09: 0000000000000084 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] R10: ffffc9001101ff83 R11: ffffc90011018685 R12: 0000000000000001 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] R13: 0000000000000000 R14: ffffc9001101867c R15: ffff88005e2cbbe1 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] FS: 00007f9cdde13720(0000) GS:ffff880066a00000(0000) knlGS:0000000000000000 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] CR2: 00000000ffe1867c CR3: 000000002dace000 CR4: 00000000000006f0 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] Process efibootmgr (pid: 28432, threadinfo ffff88005e2ca000, task ffff880014f0dc80) $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] Stack: $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] ffffc90011010000 ffff88005e2cbac8 0000000000010000 ffff880066d4401d $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] 000000000000007c ffff880009e84400 0000000000000090 ffff880066d45738 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] ffffc9001101867c ffff880066d4331c 0000000000000009 ffffc9001101867b $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] Call Trace: $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff815e9efe>] ? _raw_spin_lock+0xe/0x20 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff811d9c2d>] ? open+0x10d/0x1b0 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff8116554b>] ? __dentry_open+0x2bb/0x320 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff811d9b20>] ? bin_vma_open+0x70/0x70 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff815e9efe>] ? _raw_spin_lock+0xe/0x20 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff811849ee>] ? vfsmount_lock_local_unlock+0x1e/0x30 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff8104303b>] ? efi_call5+0x4b/0x80 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff81042a7f>] ? virt_efi_set_variable+0x2f/0x40 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff814bb125>] ? efivar_create+0x1e5/0x280 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff811d9d63>] ? write+0x93/0x190 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff811d9de4>] ? write+0x114/0x190 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff81167813>] ? vfs_write+0xb3/0x180 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff81167b3a>] ? sys_write+0x4a/0x90 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff815f22c2>] ? system_call_fastpath+0x16/0x1b $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] Code: ec 01 75 f0 41 bc 01 00 00 00 e8 e5 fb ff ff e8 e4 fc ff ff 33 c0 44 0f b7 c0 66 3b c3 73 20 41 0f b7 c0 41 0f b7 d0 03 c5 8b c8 <8a> 00 42 38 04 3a 75 0a 66 45 03 c4 66 44 3b c3 72 e2 33 c0 66 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] RIP [<ffff880066d44c1f>] 0xffff880066d44c1e $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] RSP <ffff88005e2cbab0> $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] CR2: 00000000ffe1867c $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] ---[ end trace 493844b002da4787 ]---

    Read the article

  • Installing Ubuntu 12.04.1 x64 with Fake RAID 1 [SOLVED]

    - by Arkadius
    I had: Software: Dual boot with Windows XP Ubuntu 10.04 LTS x32 Hardware Fake RAID 1 (mirroring) with 2x1 TB: Partition 1 - Windows Partition 2 - SWAP Partition 3 - / (root) Partition 4 - Extended Partition 5 - /home Partition 6 - /data arek@domek:/var/log/installer$ sudo fdisk -l Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000de1b9 Device Boot Start End Blocks Id System /dev/sda1 * 63 524297339 262148638+ 7 HPFS/NTFS/exFAT /dev/sda2 524297340 528506369 2104515 82 Linux swap / Solaris /dev/sda3 528506370 570468149 20980890 83 Linux /dev/sda4 570468150 1953118439 691325145 5 Extended /dev/sda5 570468213 675340469 52436128+ 83 Linux /dev/sda6 675340533 1953118439 638888953+ 83 Linux Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000de1b9 Device Boot Start End Blocks Id System /dev/sdb1 * 63 524297339 262148638+ 7 HPFS/NTFS/exFAT /dev/sdb2 524297340 528506369 2104515 82 Linux swap / Solaris /dev/sdb3 528506370 570468149 20980890 83 Linux /dev/sdb4 570468150 1953118439 691325145 5 Extended /dev/sdb5 570468213 675340469 52436128+ 83 Linux /dev/sdb6 675340533 1953118439 638888953+ 83 Linux arek@domek:/var/log/installer$ ls -l /dev/mapper/ total 0 crw------- 1 root root 10, 236 Oct 7 20:17 control lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha -> ../dm-0 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha1 -> ../dm-1 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha2 -> ../dm-2 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha3 -> ../dm-3 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha4 -> ../dm-4 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha5 -> ../dm-5 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha6 -> ../dm-6 I wanted to upgrade from 10.04 x32 to 12.04 x64 using FRESH installation. So, run installation of Ubuntu 12.04.1 x64 LTS using alternate CD. During the installation I selected manual partitioning and to: - Use and Format / (root) - Use and Format SWAP - Use and Keep data on /home - Use and Keep data on /data After I clicked "Continue" I get error creating and formatting SWAP partition. I go to terminal with Alt + F2 (?) and hit enter. I discovered that there was visible RAID as only disk with NO partitions. Something like this: arek@domek:/var/log/installer$ ls -l /dev/mapper/ lrwxrwxrwx 1 root root 7 Oct 7 20:17 /dev/mapper/pdc_jhjbcaha -> ../dm-0 arek@domek:/var/log/installer$ ls -l /dev/dm* brw-rw---- 1 root disk 252, 0 Oct 7 20:17 /dev/dm-0 So I switched to log console Alt+F3 (?) and saw errors like below: Oct 7 14:02:45 check-missing-firmware: /dev/.udev/firmware-missing does not exist, skipping Oct 7 14:02:45 check-missing-firmware: /run/udev/firmware-missing does not exist, skipping Oct 7 14:02:45 check-missing-firmware: no missing firmware in /dev/.udev/firmware-missing /run/udev/firmware-missing Oct 7 14:02:45 anna-install: Installing dmraid-udeb Oct 7 14:02:45 anna[12599]: DEBUG: retrieving dmraid-udeb 1.0.0.rc16-4.1ubuntu8 Oct 7 14:02:49 anna[12599]: DEBUG: retrieving libdmraid1.0.0.rc16-udeb 1.0.0.rc16-4.1ubuntu8 Oct 7 14:02:49 anna[12599]: DEBUG: retrieving kpartx-udeb 0.4.9-3ubuntu5 Oct 7 14:02:49 disk-detect: Serial ATA RAID disk(s) detected. Oct 7 14:02:55 disk-detect: Enabling dmraid support. Oct 7 14:02:55 disk-detect: RAID set "pdc_jhjbcaha" was activated Oct 7 14:02:55 HERE --> dmraid-activate: ERROR: Cannot retrieve RAID set information for pdc_jhjbcaha Oct 7 14:02:56 check-missing-firmware: /dev/.udev/firmware-missing does not exist, skipping Oct 7 14:02:56 check-missing-firmware: /run/udev/firmware-missing does not exist, skipping Oct 7 14:02:56 check-missing-firmware: no missing firmware in /dev/.udev/firmware-missing /run/udev/firmware-missing Oct 7 14:02:57 main-menu[428]: DEBUG: resolver (libnewt0.52): package doesn't exist (ignored) Oct 7 14:02:57 main-menu[428]: DEBUG: resolver (ext2-modules): package doesn't exist (ignored) Oct 7 14:02:57 main-menu[428]: INFO: Menu item 'partman-base' selected Oct 7 14:02:57 kernel: [ 316.512999] NTFS driver 2.1.30 [Flags: R/O MODULE]. Oct 7 14:02:57 kernel: [ 316.523221] Btrfs loaded Oct 7 14:02:57 kernel: [ 316.534781] JFS: nTxBlock = 8192, nTxLock = 65536 Oct 7 14:02:57 kernel: [ 316.554749] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled Oct 7 14:02:57 kernel: [ 316.555336] SGI XFS Quota Management subsystem Oct 7 14:02:58 md-devices: mdadm: No arrays found in config file or automatically Oct 7 14:02:58 partman: No matching physical volumes found Oct 7 14:02:58 partman: No volume groups found Oct 7 14:02:58 partman: Reading all physical volumes. This may take a while... Oct 7 14:02:58 partman-lvm: No volume groups found Oct 7 14:02:58 partman: Error running 'tune2fs -l /dev/mapper/pdc_jhjbcaha' Oct 7 14:02:58 partman: Error running 'tune2fs -l /dev/mapper/pdc_jhjbcaha' Oct 7 14:02:58 partman: Error running 'tune2fs -l /dev/mapper/pdc_jhjbcaha' Oct 7 14:06:11 HERE --> partman: mkswap: can't open '/dev/mapper/pdc_jhjbcaha2': No such file or directory Oct 7 14:07:28 init: starting pid 401, tty '/dev/tty2': '-/bin/sh' Oct 7 14:15:00 net/hw-detect.hotplug: Detected hotpluggable network interface eth0 Oct 7 14:15:00 net/hw-detect.hotplug: Detected hotpluggable network interface lo As You can see there are 2 errors Oct 7 14:02:55 dmraid-activate: ERROR: Cannot retrieve RAID set information for pdc_jhjbcaha and Oct 7 14:06:11 partman: mkswap: can't open '/dev/mapper/pdc_jhjbcaha2': No such file or directory I looked in the internet and try to run command "dmraid -ay" and get something like that: dmraid -ay /dev/mapper/pdc_jhjbcaha -> Already activated /dev/mapper/pdc_jhjbcaha1 -> Successfully activated /dev/mapper/pdc_jhjbcaha2 -> Successfully activated /dev/mapper/pdc_jhjbcaha3 -> Successfully activated /dev/mapper/pdc_jhjbcaha4 -> Successfully activated /dev/mapper/pdc_jhjbcaha5 -> Successfully activated /dev/mapper/pdc_jhjbcaha6 -> Successfully activated Then I returned to installer with Alt+F1 (?) and click "Return" to return to partitioning menu. I did NOT change anything just selected again "Continue" and everything goes smoothly. I hope this will help someone. arkadius

    Read the article

1