Search Results

Search found 21 results on 1 pages for 'k georgiev'.

Page 1/1 | 1 

• SQL SERVER – Guest Posts – Feodor Georgiev – The Context of Our Database Environment – Going Beyond the Internal SQL Server Waits – Wait Type – Day 21 of 28

  - by pinaldave

  This guest post is submitted by Feodor. Feodor Georgiev is a SQL Server database specialist with extensive experience of thinking both within and outside the box. He has wide experience of different systems and solutions in the fields of architecture, scalability, performance, etc. Feodor has experience with SQL Server 2000 and later versions, and is certified in SQL Server 2008. In this article Feodor explains the server-client-server process, and concentrated on the mutual waits between client and SQL Server. This is essential in grasping the concept of waits in a ‘global’ application plan. Recently I was asked to write a blog post about the wait statistics in SQL Server and since I had been thinking about writing it for quite some time now, here it is. It is a wide-spread idea that the wait statistics in SQL Server will tell you everything about your performance. Well, almost. Or should I say – barely. The reason for this is that SQL Server is always a part of a bigger system – there are always other players in the game: whether it is a client application, web service, any other kind of data import/export process and so on. In short, the SQL Server surroundings look like this: This means that SQL Server, aside from its internal waits, also depends on external waits and settings. As we can see in the picture above, SQL Server needs to have an interface in order to communicate with the surrounding clients over the network. For this communication, SQL Server uses protocol interfaces. I will not go into detail about which protocols are best, but you can read this article. Also, review the information about the TDS (Tabular data stream). As we all know, our system is only as fast as its slowest component. This means that when we look at our environment as a whole, the SQL Server might be a victim of external pressure, no matter how well we have tuned our database server performance. Let’s dive into an example: let’s say that we have a web server, hosting a web application which is using data from our SQL Server, hosted on another server. The network card of the web server for some reason is malfunctioning (think of a hardware failure, driver failure, or just improper setup) and does not send/receive data faster than 10Mbs. On the other end, our SQL Server will not be able to send/receive data at a faster rate either. This means that the application users will notify the support team and will say: “My data is coming very slow.” Now, let’s move on to a bit more exciting example: imagine that there is a similar setup as the example above – one web server and one database server, and the application is not using any stored procedure calls, but instead for every user request the application is sending 80kb query over the network to the SQL Server. (I really thought this does not happen in real life until I saw it one day.) So, what happens in this case? To make things worse, let’s say that the 80kb query text is submitted from the application to the SQL Server at least 100 times per minute, and as often as 300 times per minute in peak times. Here is what happens: in order for this query to reach the SQL Server, it will have to be broken into a of number network packets (according to the packet size settings) – and will travel over the network. On the other side, our SQL Server network card will receive the packets, will pass them to our network layer, the packets will get assembled, and eventually SQL Server will start processing the query – parsing, allegorizing, generating the query execution plan and so on. So far, we have already had a serious network overhead by waiting for the packets to reach our Database Engine. There will certainly be some processing overhead – until the database engine deals with the 80kb query and its 20 subqueries. The waits you see in the DMVs are actually collected from the point the query reaches the SQL Server and the packets are assembled. Let’s say that our query is processed and it finally returns 15000 rows. These rows have a certain size as well, depending on the data types returned. This means that the data will have converted to packages (depending on the network size package settings) and will have to reach the application server. There will also be waits, however, this time you will be able to see a wait type in the DMVs called ASYNC_NETWORK_IO. What this wait type indicates is that the client is not consuming the data fast enough and the network buffers are filling up. Recently Pinal Dave posted a blog on Client Statistics. What Client Statistics does is captures the physical flow characteristics of the query between the client(Management Studio, in this case) and the server and back to the client. As you see in the image, there are three categories: Query Profile Statistics, Network Statistics and Time Statistics. Number of server roundtrips–a roundtrip consists of a request sent to the server and a reply from the server to the client. For example, if your query has three select statements, and they are separated by ‘GO’ command, then there will be three different roundtrips. TDS Packets sent from the client – TDS (tabular data stream) is the language which SQL Server speaks, and in order for applications to communicate with SQL Server, they need to pack the requests in TDS packets. TDS Packets sent from the client is the number of packets sent from the client; in case the request is large, then it may need more buffers, and eventually might even need more server roundtrips. TDS packets received from server –is the TDS packets sent by the server to the client during the query execution. Bytes sent from client – is the volume of the data set to our SQL Server, measured in bytes; i.e. how big of a query we have sent to the SQL Server. This is why it is best to use stored procedures, since the reusable code (which already exists as an object in the SQL Server) will only be called as a name of procedure + parameters, and this will minimize the network pressure. Bytes received from server – is the amount of data the SQL Server has sent to the client, measured in bytes. Depending on the number of rows and the datatypes involved, this number will vary. But still, think about the network load when you request data from SQL Server. Client processing time – is the amount of time spent in milliseconds between the first received response packet and the last received response packet by the client. Wait time on server replies – is the time in milliseconds between the last request packet which left the client and the first response packet which came back from the server to the client. Total execution time – is the sum of client processing time and wait time on server replies (the SQL Server internal processing time) Here is an illustration of the Client-server communication model which should help you understand the mutual waits in a client-server environment. Keep in mind that a query with a large ‘wait time on server replies’ means the server took a long time to produce the very first row. This is usual on queries that have operators that need the entire sub-query to evaluate before they proceed (for example, sort and top operators). However, a query with a very short ‘wait time on server replies’ means that the query was able to return the first row fast. However a long ‘client processing time’ does not necessarily imply the client spent a lot of time processing and the server was blocked waiting on the client. It can simply mean that the server continued to return rows from the result and this is how long it took until the very last row was returned. The bottom line is that developers and DBAs should work together and think carefully of the resource utilization in the client-server environment. From experience I can say that so far I have seen only cases when the application developers and the Database developers are on their own and do not ask questions about the other party’s world. I would recommend using the Client Statistics tool during new development to track the performance of the queries, and also to find a synchronous way of utilizing resources between the client – server – client. Here is another example: think about similar setup as above, but add another server to the game. Let’s say that we keep our media on a separate server, and together with the data from our SQL Server we need to display some images on the webpage requested by our user. No matter how simple or complicated the logic to get the images is, if the images are 500kb each our users will get the page slowly and they will still think that there is something wrong with our data. Anyway, I don’t mean to get carried away too far from SQL Server. Instead, what I would like to say is that DBAs should also be aware of ‘the big picture’. I wrote a blog post a while back on this topic, and if you are interested, you can read it here about the big picture. And finally, here are some guidelines for monitoring the network performance and improving it: Run a trace and outline all queries that return more than 1000 rows (in Profiler you can actually filter and sort the captured trace by number of returned rows). This is not a set number; it is more of a guideline. The general thought is that no application user can consume that many rows at once. Ask yourself and your fellow-developers: ‘why?’. Monitor your network counters in Perfmon: Network Interface:Output queue length, Redirector:Network errors/sec, TCPv4: Segments retransmitted/sec and so on. Make sure to establish a good friendship with your network administrator (buy them coffee, for example J ) and get into a conversation about the network settings. Have them explain to you how the network cards are setup – are they standalone, are they ‘teamed’, what are the settings – full duplex and so on. Find some time to read a bit about networking. In this short blog post I hope I have turned your attention to ‘the big picture’ and the fact that there are other factors affecting our SQL Server, aside from its internal workings. As a further reading I would still highly recommend the Wait Stats series on this blog, also I would recommend you have the coffee break conversation with your network admin as soon as possible. This guest post is written by Feodor Georgiev. Read all the post in the Wait Types and Queue series. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, Readers Contribution, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL

  Read the article

• SQLAuthority News – Job Interviewing the Right Way (and for the Right Reasons) – Guest Post by Feodor Georgiev

  - by pinaldave

  Feodor Georgiev is a SQL Server database specialist with extensive experience of thinking both within and outside the box. He has wide experience of different systems and solutions in the fields of architecture, scalability, performance, etc. Feodor has experience with SQL Server 2000 and later versions, and is certified in SQL Server 2008. Feodor has written excellent article on Job Interviewing the Right Way. Here is his article in his own language. A while back I was thinking to start a blog post series on interviewing and employing IT personnel. At that time I had just read the ‘Smart and gets things done’ book (http://www.joelonsoftware.com/items/2007/06/05.html) and I was hyped up on some debatable topics regarding finding and employing the best people in the branch. I have no problem with hiring the best of the best; it’s just the definition of ‘the best of the best’ that makes things a bit more complicated. One of the fundamental books one can read on the topic of interviewing is the one mentioned above. If you have not read it, then you must do so; not because it contains the ultimate truth, and not because it gives the answers to most questions on the subject, but because the book contains an extensive set of questions about interviewing and employing people. Of course, a big part of these questions have different answers, depending on location, culture, available funds and so on. (What works in the US may not necessarily work in the Nordic countries or India, or it may work in a different way). The only thing that is valid regardless of any external factor is this: curiosity. In my belief there are two kinds of people – curious and not-so-curious; regardless of profession. Think about it – professional success is directly proportional to the individual’s curiosity + time of active experience in the field. (I say ‘active experience’ because vacations and any distractions do not count as experience :)  ) So, curiosity is the factor which will distinguish a good employee from the not-so-good one. But let’s shift our attention to something else for now: a few tips and tricks for successful interviews. Tip and trick #1: get your priorities straight. Your status usually dictates your priorities; for example, if the person looking for a job has just relocated to a new country, they might tend to ignore some of their priorities and overload others. In other words, setting priorities straight means to define the personal criteria by which the interview process is lead. For example, similar to the following questions can help define the criteria for someone looking for a job: How badly do I need a (any) job? Is it more important to work in a clean and quiet environment or is it important to get paid well (or both, if possible)? And so on… Furthermore, before going to the interview, the candidate should have a list of priorities, sorted by the most importance: e.g. I want a quiet environment, x amount of money, great helping boss, a desk next to a window and so on. Also it is a good idea to be prepared and know which factors can be compromised and to what extent. Tip and trick #2: the interview is a two-way street. A job candidate should not forget that the interview process is not a one-way street. What I mean by this is that while the employer is interviewing the potential candidate, the job seeker should not miss the chance to interview the employer. Usually, the employer and the candidate will meet for an interview and talk about a variety of topics. In a quality interview the candidate will be presented to key members of the team and will have the opportunity to ask them questions. By asking the right questions both parties will define their opinion about each other. For example, if the candidate talks to one of the potential bosses during the interview process and they notice that the potential manager has a hard time formulating a question, then it is up to the candidate to decide whether working with such person is a red flag for them. There are as many interview processes out there as there are companies and each one is different. Some bigger companies and corporates can afford pre-selection processes, 3 or even 4 stages of interviews, small companies usually settle with one interview. Some companies even give cognitive tests on the interview. Why not? In his book Joel suggests that a good candidate should be pampered and spoiled beyond belief with a week-long vacation in New York, fancy hotels, food and who knows what. For all I can imagine, an interview might even take place at the top of the Eifel tower (right, Mr. Joel, right?) I doubt, however, that this is the optimal way to capture the attention of a good employee. The ‘curiosity’ topic What I have learned so far in my professional experience is that opinions can be subjective. Plus, opinions on technology subjects can also be subjective. According to Joel, only hiring the best of the best is worth it. If you ask me, there is no such thing as best of the best, simply because human nature (well, aside from some physical limitations, like putting your pants on through your head :) ) has no boundaries. And why would it have boundaries? I have seen many curious and interesting people, naturally good at technology, though uninterested in it as one  can possibly be; I have also seen plenty of people interested in technology, who (in an ideal world) should have stayed far from it. At any rate, all of this sums up at the end to the ‘supply and demand’ factor. The interview process big-bang boils down to this: If there is a mutual benefit for both the employer and the potential employee to work together, then it all sorts out nicely. If there is no benefit, then it is much harder to get to a common place. Tip and trick #3: word-of-mouth is worth a thousand words Here I would just mention that the best thing a job candidate can get during the interview process is access to future team members or other employees of the new company. Nowadays the world has become quite small and everyone knows everyone. Look at LinkedIn, look at other professional networks and you will realize how small the world really is. Knowing people is a good way to become more approachable and to approach them. Tip and trick #4: Be confident. It is true that for some people confidence is as natural as breathing and others have to work hard to express it. Confidence is, however, a key factor in convincing the other side (potential employer or employee) that there is a great chance for success by working together. But it cannot get you very far if it’s not backed up by talent, curiosity and knowledge. Tip and trick #5: The right reasons What really bothers me in Sweden (and I am sure that there are similar situations in other countries) is that there is a tendency to fill quotas and to filter out candidates by criteria different from their skill and knowledge. In job ads I see quite often the phrases ‘positive thinker’, ‘team player’ and many similar hints about personality features. So my guess here is that discrimination has evolved to a new level. Let me clear up the definition of discrimination: ‘unfair treatment of a person or group on the basis of prejudice’. And prejudice is the ‘partiality that prevents objective consideration of an issue or situation’. In other words, there is not much difference whether a job candidate is filtered out by race, gender or by personality features – it is all a bad habit. And in reality, there is no proven correlation between the technology knowledge paired with skills and the personal features (gender, race, age, optimism). It is true that a significantly greater number of Darwin awards were given to men than to women, but I am sure that somewhere there is a paper or theory explaining the genetics behind this. J This topic actually brings to mind one of my favorite work related stories. A while back I was working for a big company with many teams involved in their processes. One of the teams was occupying 2 rooms – one had the team members and was full of light, colorful posters, chit-chats and giggles, whereas the other room was dark, lighted only by a single monitor with a quiet person in front of it. Later on I realized that the ‘dark room’ person was the guru and the ultimate problem-solving-brain who did not like the chats and giggles and hence was in a separate room. In reality, all severe problems which the chatty and cheerful team members could not solve and all emergencies were directed to ‘the dark room’. And thus all worked out well. The moral of the story: Personality has nothing to do with technology knowledge and skills. End of story. Summary: I’d like to stress the fact that there is no ultimately perfect candidate for a job, and there is no such thing as ‘best-of-the-best’. From my personal experience, the main criteria by which I measure people (co-workers and bosses) is the curiosity factor; I know from experience that the more curious and inventive a person is, the better chances there are for great achievements in their field. Related stories: (for extra credit) 1) Get your priorities straight. A while back as a consultant I was working for a few days at a time at different offices and for different clients, and so I was able to compare and analyze the work environments. There were two different places which I compared and recently I asked a friend of mine the following question: “Which one would you prefer as a work environment: a noisy office full of people, or a quiet office full of faulty smells because the office is rarely cleaned?” My friend was puzzled for a while, thought about it and said: “Hmm, you are talking about two different kinds of pollution… I will probably choose the second, since I can clean the workplace myself a bit…” 2) The interview is a two-way street. One time, during a job interview, I met a potential boss that had a hard time phrasing a question. At that particular time it was clear to me that I would not have liked to work under this person. According to my work religion, the properly asked question contains at least half of the answer. And if I work with someone who cannot ask a question… then I’d be doing double or triple work. At another interview, after the technical part with the team leader of the department, I was introduced to one of the team members and we were left alone for 5 minutes. I immediately jumped on the occasion and asked the blunt question: ‘What have you learned here for the past year and how do you like your job?’ The team member looked at me and said ‘Nothing really. I like playing with my cats at home, so I am out of here at 5pm and I don’t have time for much.’ I was disappointed at the time and I did not take the job offer. I wasn’t that shocked a few months later when the company went bankrupt. 3) The right reasons to take a job: personality check. A while back I was asked to serve as a job reference for a coworker. I agreed, and after some weeks I got a phone call from the company where my colleague was applying for a job. The conversation started with the manager’s question about my colleague’s personality and about their social skills. (You can probably guess what my internal reaction was… J ) So, after 30 minutes of pouring common sense into the interviewer’s head, we finally agreed on the fact that a shy or quiet personality has nothing to do with work skills and knowledge. Some years down the road my former colleague is taking the manager’s position as the manager is demoted to a different department. Reference: Feodor Georgiev, Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, Readers Contribution, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Silverlight Cream for April 05, 2010 -- #831

  - by Dave Campbell

  In this Issue: Rénald Nollet, Davide Zordan(-2-, -3-), Scott Barnes, Kirupa, Christian Schormann, Tim Heuer, Yavor Georgiev, and Bea Stollnitz. Shoutouts: Yavor Georgiev posted the material for his MIX 2010 talk: what’s new in WCF in Silverlight 4 Erik Mork and crew posted their This Week in Silverlight 4.1.2010 Tim Huckaby and MSDN Bytes interviewed Erik Mork: Silverlight Consulting Life – MSDN Bytes Interview From SilverlightCream.com: Home Loan Application for Windows Phone Rénald Nollet has a WP7 app up, with source, for calculating Home Loan application information. He also discusses some control issues he had with the emulator. Experiments with Multi-touch: A Windows Phone Manipulation sample Davide Zordan has updated the multi-touch project on CodePlex, and added a WP7 sample using multi-touch. Silverlight 4, MEF and MVVM: EventAggregator, ImportingConstructor and Unit Tests Davide Zordan has a second post up on MEF, MVVM, and Prism, oh yeah, and also Unit Testing... the code is available, so take a look at what he's all done with this. Silverlight 4, MEF and MVVM: MEFModules, Dynamic XAP Loading and Navigation Applications Davide Zordan then builds on the previous post and partitions the app into several XAPs put together at runtime with MEF. Silverlight Installation/Preloader Experience - BarnesStyle Scott Barnes talks about the install experience he wanted to get put into place... definitely a good read and lots of information. Changing States using GoToStateAction Kirupa has a quick run-through of Visual States, and then demonstrates using GoToStateAction and a note for a Blend 4 addition. Blend 4: About Path Layout, Part IV Christian Schormann has the next tutorial up in his series on Path Layout, and he's explaining Motion Path and Text on a Path. Managing service references and endpoint configurations for Silverlight applications Helping solve a common and much reported problem of managing service references, Tim Heuer details his method of resolving it and additional tips and tricks to boot. Some known WCF issues in Silverlight 4 Yavor Georgiev, a Program Manager for WCF blogged about the issues that they were not able to fix due to scheduling of the release How can I update LabeledPieChart to use the latest toolkit? Bea Stollnitz revisits some of her charting posts to take advantage of the unsealing of toolkit classes in labeling the Chart and PieSeries Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Disabling Windows Server 2008 firewall

  - by Vladimir Georgiev

  I am very stupid. I applied a windows firewall rule that blocks all tcp connection and thus kicking me out of remote desktop on a dedicated server. I managed to get into recovery via VNC, which is basically a windows xp recovery system. I have access to the physical files of the Windows Server 2008 R2 installation, but I don't know how to disable the firewall so I can reboot from recovery and connect to the W2K8 via remote desktop. Please, help.

  Read the article

• Silverlight Firestarter Wrap Up and WCF RIA Services Talk Sample Code

  - by dwahlin

  I had a great time attending and speaking at the Silverlight Firestarter event up in Redmond on December 2, 2010. In addition to getting a chance to hang out with a lot of cool people from Microsoft such as Scott Guthrie, John Papa, Tim Heuer, Brian Goldfarb, John Allwright, David Pugmire, Jesse Liberty, Jeff Handley, Yavor Georgiev, Jossef Goldberg, Mike Cook and many others, I also had a chance to chat with a lot of people attending the event and hear about what projects they’re working on which was awesome. If you didn’t get a chance to look through all of the new features coming in Silverlight 5 check out John Papa’s post on the subject. While at the Silverlight Firestarter event I gave a presentation on WCF RIA Services and wanted to get the code posted since several people have asked when it’d be available. The talk can be viewed by clicking the image below. Code from the talk follows as well as additional links. I had a few people ask about the green bracelet on my left hand since it looks like something you’d get from a waterpark. It was used to get us access down a little hall that led backstage and allowed us to go backstage during the event. I thought it looked kind of dorky but it was required to get through security. Sample Code from My WCF RIA Services Talk (To login to the 2 apps use “user” and “P@ssw0rd”. Make sure to do a rebuild of the projects in Visual Studio before running them.) View All Silverlight Firestarter Talks and Scott Guthrie’s Keynote WCF RIA Services SP1 Beta for Silverlight 4 WCF RIA Services Code Samples (including some SP1 samples) Improved binding support in EntitySet and EntityCollection with SP1 (Kyle McClellan’s Blog) Introducing an MVVM-Friendly DomainDataSource: The DomainCollectionView (Kyle McClellan’s Blog) I’ve had the chance to speak at a lot of conferences but never with as many cameras, streaming capabilities, people watching live and overall hype involved. Over 1000 people registered to attend the conference in person at the Microsoft campus and well over 15,000 to watch it through the live stream.  The event started for me on Tuesday afternoon with a flight up to Seattle from Phoenix. My flight was delayed 1 1/2 hours (I seem to be good at booking delayed flights) so I didn’t get up there until almost 8 PM. John Papa did a tech check at 9 PM that night and I was scheduled for 9:30 PM. We basically plugged in my laptop backstage (amazing number of servers, racks and audio devices back there) and made sure everything showed up properly on the projector and the machines recording the presentation. In addition to a dedicated show director, there were at least 5 tech people back stage and at least that many up in the booth running lights, audio, cameras, and other aspects of the show. I wish I would’ve taken a picture of the backstage setup since it was pretty massive – servers all over the place. I definitely gained a new appreciation for how much work goes into these types of events. Here’s what the room looked like right before my tech check– not real exciting at this point. That’s Yavor Georgiev (who spoke on WCF Services at the Firestarter) in the background. We had plenty of monitors to reference during the presentation. Two monitors for slides (right and left side) and a notes monitor. The 4th monitor showed the time and they’d type in notes to us as we talked (such as “You’re over time!” in my case since I went around 4 minutes over :-)). Wednesday morning I went back on campus at Microsoft and watched John Papa film a few Silverlight TV episodes with Dave Campbell and Ryan Plemons.   Next I had the chance to watch the dry run of the keynote with Scott Guthrie and John Papa. We were all blown away by the demos shown since they were even better than expected. Starting at 1 PM on Wednesday I went over to Building 35 and listened to Yavor Georgiev (WCF Services), Jaime Rodriguez (Windows Phone 7), Jesse Liberty (Data Binding) and Jossef Goldberg and Mike Cook (Silverlight Performance) give their different talks and we all shared feedback with each other which was a lot of fun. Jeff Handley from the RIA Services team came afterwards and listened to me give a dry run of my WCF RIA Services talk. He had some great feedback that I really appreciated getting. That night I hung out with John Papa and Ward Bell and listened to John walk through his keynote demos. I also got a sneak peak of the gift given to Dave Campbell for all his work with Silverlight Cream over the years. It’s a poster signed by all of the key people involved with Silverlight: Thursday morning I got up fairly early to get to the event center by 8 AM for speaker pictures. It was nice and quiet at that point although outside the room there was a huge line of people waiting to get in.     At around 8:30 AM everyone was let in and the main room was filled quickly. Two other overflow rooms in the Microsoft conference center (Building 33) were also filled to capacity. At around 9 AM Scott Guthrie kicked off the event and all the excitement started! From there it was all a blur but it was definitely a lot of fun. All of the sessions for the Silverlight Firestarter were recorded and can be watched here (including the keynote). Corey Schuman, John Papa and I also released 11 lab exercises and associated videos to help people get started with Silverlight. Definitely check them out if you’re interested in learning more! Level 100: Getting Started Lab 01 - WinForms and Silverlight Lab 02 - ASP.NET and Silverlight Lab 03 - XAML and Controls Lab 04 - Data Binding Level 200: Ready for More Lab 05 - Migrating Apps to Out-of-Browser Lab 06 - Great UX with Blend Lab 07 - Web Services and Silverlight Lab 08 - Using WCF RIA Services Level 300: Take me Further Lab 09 - Deep Dive into Out-of-Browser Lab 10 - Silverlight Patterns: Using MVVM Lab 11 - Silverlight and Windows Phone 7

  Read the article

• IPhone app with SSL client certs

  - by Pavel Georgiev

  I'm building an iphone app that needs to access a web service over https using client certificates. If I put the client cert (in pkcs12 format) in the app bundle, I'm able to load it into the app and make the https call (largely thanks to stackoverflow.com). However, I need a way to distribute the app without any certs and leave it to the user to provide his own certificate. I thought I would just do that by instructing the user to import the certificate in iphone's profiles (settings-general-profiles), which is what you get by opening a .p12 file in Mail.app and then I would access that item in my app. I would expect that the certificates in profiles are available through the keychain API, but I guess I'm wrong on that. 1) Is there a way to access a certificate that I've already loaded in iphone's profile in my app? 2) What other options I have for loading a user specified certificate in my app? The only thing I can come up with is providing some interface where the user can give an URL to his .p12 cerificate, which I can then load into the app's keychain for later use, but thats not exactly user-friednly. I'm looking for something that would allow the user to put the cert on phone (email it to himself) and then load it in my app.

  Read the article

• Eclipse IDE Learning Curve

  - by Vladimir Georgiev

  I am a C# guy with pretty good grasp of Visual Studio IDE usage (using it since VS2003). Right now, I am doing a proof of concept app using Eclipse 3.4.1. Is there any good reference or book which describes the usage of Eclipse IDE, compared to Visual Studio. Is there any Eclipse guide for Visual Studio users :) Thanks, in advance.

  Read the article

• Can I constrain a template parameter class to implement the interfaces that are supported by other?

  - by K. Georgiev

  The name is a little blurry, so here's the situation: I'm writing code to use some 'trajectories'. The trajectories are an abstract thing, so I describe them with different interfaces. So I have a code as this: namespace Trajectories { public interface IInitial < Atom > { Atom Initial { get; set; } } public interface ICurrent < Atom > { Atom Current { get; set; } } public interface IPrevious < Atom > { Atom Previous { get; set; } } public interface ICount < Atom > { int Count { get; } } public interface IManualCount < Atom > : ICount < Atom > { int Count { get; set; } } ... } Every concrete implementation of a trajectory will implement some of the above interfaces. Here's a concrete implementation of a trajectory: public class SimpleTrajectory < Atom > : IInitial < Atom >, ICurrent < Atom >, ICount < Atom > { // ICount public int Count { get; private set; } // IInitial private Atom initial; public Atom Initial { get { return initial; } set { initial = current = value; Count = 1; } } // ICurrent private Atom current; public Atom Current { get { return current; } set { current = value; Count++; } } } Now, I want to be able to deduce things about the trajectories, so, for example I want to support predicates about different properties of some trajectory: namespace Conditions { public interface ICondition &lt Atom, Trajectory &gt { bool Test(ref Trajectory t); } public class CountLessThan &lt Atom, Trajectory &gt : ICondition &lt Atom, Trajectory &gt where Trajectory : Trajectories.ICount &lt Atom &gt { public int Value { get; set; } public CountLessThan() { } public bool Test(ref Trajectory t) { return t.Count &lt Value; } } public class CurrentNormLessThan &lt Trajectory &gt : ICondition &lt Complex, Trajectory &gt where Trajectory : Trajectories.ICurrent &lt Complex &gt { public double Value { get; set; } public CurrentNormLessThan() { } public bool Test(ref Trajectory t) { return t.Current.Norm() &lt Value; } } } Now, here's the question: What if I wanted to implement AND predicate? It would be something like this: public class And &lt Atom, CondA, TrajectoryA, CondB, TrajectoryB, Trajectory &gt : ICondition &lt Atom, Trajectory &gt where CondA : ICondition &lt Atom, TrajectoryA &gt where TrajectoryA : // Some interfaces where CondB : ICondition &lt Atom, TrajectoryB &gt where TrajectoryB : // Some interfaces where Trajectory : // MUST IMPLEMENT THE INTERFACES FOR TrajectoryA AND THE INTERFACES FOR TrajectoryB { public CondA A { get; set; } public CondB B { get; set; } public bool Test(ref Trajectory t){ return A.Test(t) && B.Test(t); } } How can I say: support only these trajectories, for which the arguments of AND are ok? So I can be able to write: var vand = new CountLessThan(32) & new CurrentNormLessThan(4.0); I think if I create an orevall interface for every subset of interfaces, I could be able to do it, but it will become quite ugly.

  Read the article

• mod_perl memory

  - by Pavel Georgiev

  Hi, I have a perl script running in mod_perl that needs to write a large amount of data to the client, possibly over a long period. The behavior that I observe is that once I print and flush something, the buffer memory is not reclaimed even though I rflush (I know this cant be reclaimed back by the OS). Is that how mod_perl operates and is there a way that I can force it to periodically free the buffer memory, so that I can use that for new buffers instead of taking more from the OS?

  Read the article

• How to determine the encoding of a webresponse stream ?

  - by Vladimir Georgiev

  Hi, How to determine the encoding of a webresponse stream ?

  Read the article

• Can the get of a property be abstract and the set be virtual?

  - by K. Georgiev

  I have a base class like this: public class Trajectory{ public int Count { get; set; } public double Initial { get; set { Count = 1; } } public double Current { get; set { Count ++ ; } } } So, I have code in the base class, which makes the set-s virtual, but the get-s must stay abstract. So I need something like this: ... public double Initial { abstract get; virtual set { Count = 1; } } ... But this code gives an error. The whole point is to implement the counter functionality in the base class instead in all the derived classes. So, how can I make the get and set of a property with different modifiers?

  Read the article

• In content page, the jquery document ready event fires before the content page is loaded.

  - by Vladimir Georgiev

  I have a master page that references jquery + jqueryui. Everything is fine. In the content page I placed: $(document).ready(function () { $("#tabs").tabs(); }); It turns out that the ready event fires BEFORE the html of the content page is loaded :/. So, how to determine when the whole content page is loaded ?

  Read the article

• MySQL Cluster data nodes - slow SELECTs

  - by Boyan Georgiev

  Hi to all. First off, I'm new to MySQL Cluster. This is my pain: I've managed to setup a MySQL Cluster with two data nodes, two SQL nodes and one management server. Everything works pretty well, except the following: my data nodes are spread across an intranet link which incurs latency into communications between the data nodes. Apparently, due to MySQL Cluster's internal partitioning schemes, when my PHP application pulls data from the cluster via SELECT queries, parts of the data are pulled from both data nodes. This makes the page appear onscreen REALLY slowly. If I bring one data node offline, the data can only be pulled from that single remaining data node, and thus, the final result (HTML output) appears on the screen in a very timely fashion. So, my question is this: can the data nodes/cluster be told to pull data from partitions stored only on a particular data node?

  Read the article

• Is there a way that I can force mod_perl to re-use buffer memory?

  - by Pavel Georgiev

  Hi, I have a Perl script running in mod_perl that needs to write a large amount of data to the client, possibly over a long period. The behavior that I observe is that once I print and flush something, the buffer memory is not reclaimed even though I rflush (I know this can't be reclaimed back by the OS). Is that how mod_perl operates and is there a way that I can force it to periodically free the buffer memory, so that I can use that for new buffers instead of taking more from the OS?

  Read the article

• Silverlight Cream for May 20, 2010 -- #866

  - by Dave Campbell

  In this Issue: Mike Snow, Victor Gaudioso, Ola Karlsson, Josh Twist(-2-), Yavor Georgiev, Jeff Wilcox, and Jesse Liberty. Shoutouts: Frank LaVigne has an interesting observation on his site: The Big Take-Away from MIX10 Rishi has updated all his work including a release of nRoute to the latest bits: nRoute Samples Revisited Looks like I posted one of Erik Mork's links two days in a row :) ... that's because I meant to post this one: Silverlight Week – How to Choose a Mobile Platform Just in case you missed it (and for me to find it easy), Scott Guthrie has an excellent post up on Silverlight 4 Tools for VS 2010 and WCF RIA Services Released From SilverlightCream.com: Silverlight Tip of the Day #23 – Working with Strokes and Shapes Mike Snow's Silverlight Tip of the Day number 23 is up and about Strokes and Shapes -- as in dotted and dashed lines. New Silverlight Video Tutorial: How to Fire a Visual State based upon the value of a Boolean Variable Victor Gaudioso's latest video tutorial is up and is on selecting and firing a video state based on a boolean... project included. Simultaneously calling multiple methods on a WCF service from silverlight Ola Karlsson details a problem he had where he was calling multiple WCF services to pull all his data and had problems... turns out it was a blocking call and he found the solution in the forums and details it all out for us... actually, a search at SilverlightCream.com would have found one of the better posts listed once you knew the problem :) Securing Your Silverlight Applications Josh Twist has an article in MSDN on Silverlight Security. He talks about Windows, forms, and .NET authorization then WCF, WCF Data, cross domain and XAP files. He also has some good external links. Template/View selection with MEF in Silverlight Josh Twist points out that this next article is just a simple demonstration, but he's discussing, and provides code for, a MEF-driven ViewModel navigation scheme with animation on the navigation. Workaround for accessing some ASMX services from Silverlight 4 Are you having problems hitting you asmx web service with Silverlight 4? Yeah... others are too! Yavor Georgiev at the Silverlight Web Services Team blog has a post up about it... why it's a sometimes problem and a workaround for it. Using Silverlight 4 features to create a Zune-like context menu Jeff Wilcox used Silverlight 4 and the Toolkit to create some samples of menus, then demonstrates a duplication of the Zune menu. You Already Are A Windows Phone 7 Programmer Jesse Liberty is demonstrating the fact that Silverlight developers are WP7 developers by creating a Silverlight and a WP7 app side by side using the same code... this is a closer look at the Silverlight TV presentation he did. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Travelling MVP #2: Community event at Bucharest, Romania

  - by DigiMortal

  My second trip was to DevReach with two stops. My first stop was at Bucharest where I met with my friend Dimitar Georgiev who is one of authors of Gym Realm service. Romanian MVP Andrei Ignat was our host there and organized meeting with local community guys. With me – it was first time in my life – was one more guy from Estonia visiting DevReach and he made the whole trip with me. Bucharest We arrived to Bucharest 29.09 at night. We stayed at Hotel Michelangelo. It’s small hotel with nice rooms, free WiFi and very good service. Although my room was on the first floor there was no street noise. We visited one restaurant that offers national cuisine and it was really great. Next day we went out with local guys and had some beers in “old town”. Bucharest “old town” is nice and cozy. There are many bars open and I am sure everybody will find there some very okay place. After supper we visited one warm karaoke bar where we had beers with local guys. Andrei Ignat – karaoke star Agu Suur and Andrei Ion Rinea enjoying karaoke and tequila Community event Next day we had community event. I made my session about ASP.NET Web API and Dimitar told about how to port ASP.NET web applications to cloud environment. Sessions were held at study class of one local company. Dimitar Georgiev speaking about porting web apps to Windows Azure. As it was usual community evening and not some bigger event there were about 12 guys attending from Bucharest. There were both IT-PROs and developers and one nice thing about Bucharest community is that they are listening to you very well and they ask questions if something is unclear or if you slide over from topic they are interested in. Okay, we tried to keep up good tempo so people stay awake and I think we succeeded. After sessions we went all together to local Piranha pub that was near event venue. We had some beers with local guys and talked with them on different technology topics. It was another good and interesting evening at Bucharest. I want to go back there for sure. As it was my first trip to Bucharest and mostly I gathered experiences I think my next community trip there will be way stronger. I take it as a challenge. Plus – I have there some new friends and I want to meet them too – be it community event or not. :)

  Read the article

• Silverlight Cream for April 16, 2010 -- #838

  - by Dave Campbell

  In this Issue: Alan Beasley(-2-, -3-, -4-, -5-), Brian, Rishi, Pete Brown, Yavor Georgiev, and David Anson. Shoutouts: As usual, Tim Heuer has all the scoop on all the hot-off-the-presses releases: Silverlight 4 released. Availability of tools announcement. He covers all the main parts of interest. Tim Heuer also discusses Backward Compatibility with Silverlight 4 applications And before you ask, Tim Heuer announced the Silverlight Client for Facebook updated for Silverlight 4 release If you're having trouble with the install, Peter Bromberg has a post up to help bail you out: Get Silverlight 4 Installed: Tips and Tricks Christian Schormann has a link to probably the fastest intro to SketchFlow I've seen: Video: SketchFlow in 90 seconds, with Jon Harris Chris Rouw has a Summary of Silverlight at DevConnections on his site. I had the opportunity to spend some time with Chris and we had some good discussions. Rene Schulte describes how to get started with the new final Silverlight 4 RTW build and announces that he updated his samples and open source projects. He also shares what he wishes for the next Silverlight version: Silverlight 4 Up and Running From SilverlightCream.com: Building Better Buttons in Expression Blend and Silverlight I generally end up missing articles embedded at CodeProject, so Alan Beasley emailed me a link to these, they were new to me. In this first one, he's got a very nice tutorial up on making some awesome buttons in Expression Blend Arcade Button in Expression Blend and Silverlight Alan Beasley's second Expression Blend Button tutorial is the classic 'arcade button' ... this is great stuff.. check it out. Picture Frame Control in Expression Blend and Silverlight I wasn't going to do the full list Alan Beasley had sent me in one post, but they're all so good! This third takes an excursion away from buttons to do a Picture Frame control. Styled to the max, and another great Blend tutorial! The last building buttons article (Part1), in Expression Blend and Silverlight Alan Beasley finishes what may be a definitive work on buttons in Blend... even if you don't want to follow the tutorials (and why wouldn't you??) ... he's got 10 buttons you can download! ListBox Styling (Part1-ScrollBars) in Expression Blend & Silverlight In Alan Beasley's 5th post at Code Project, He has a great long tutorial on Styling Listbox Scrollbars in Expression Blend ... the ScrollBars are Part 1 of a series. Some Notes on DRM in Silverlight 4 Brian at Silverlight SDK has a post up on DRM ... WMDRM and PlayReady. If you're planning on utilizing this, Brian's post looks like a good starting point. nRoute: Now, More Wholesome Rishi has a detailed post up explaining the latest nRoute release now supporting Silverlight 4, WP7, and WPF. What a piece of work! Scanning an Image from Silverlight 4 using WIA Automation Pete Brown demonstrates using VS2010 and SL4 to lash up to his scanner. Lots of code and external links... all good stuff, Pete! Dealing with those pesky WCF CommunicationException “NotFound” errors in Silverlight Yavor Georgiev has a quick post up discussing WCF CommunicationException errors in Silverlight with a couple external links to explain the solution. New Silverlight 4 Toolkit released with today's Silverlight 4 RTW! David Anson blogged about the new Toolkit release that is live right now along with the Silverlight 4 Release, and has some release notes up on the Toolkit. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• SQL SERVER – Summary of Month – Wait Type – Day 28 of 28

  - by pinaldave

  I am glad to announce that the month of Wait Types and Queues very successful. I am glad that it was very well received and there was great amount of participation from community. I am fortunate to have some of the excellent comments throughout the series. I want to dedicate this series to all the guest blogger – Jonathan, Jacob, Glenn, and Feodor for their kindness to take a participation in this series. Here is the complete list of the blog posts in this series. I enjoyed writing the series and I plan to continue writing similar series. Please offer your opinion. SQL SERVER – Introduction to Wait Stats and Wait Types – Wait Type – Day 1 of 28 SQL SERVER – Signal Wait Time Introduction with Simple Example – Wait Type – Day 2 of 28 SQL SERVER – DMV – sys.dm_os_wait_stats Explanation – Wait Type – Day 3 of 28 SQL SERVER – DMV – sys.dm_os_waiting_tasks and sys.dm_exec_requests – Wait Type – Day 4 of 28 SQL SERVER – Capturing Wait Types and Wait Stats Information at Interval – Wait Type – Day 5 of 28 SQL SERVER – CXPACKET – Parallelism – Usual Solution – Wait Type – Day 6 of 28 SQL SERVER – CXPACKET – Parallelism – Advanced Solution – Wait Type – Day 7 of 28 SQL SERVER – SOS_SCHEDULER_YIELD – Wait Type – Day 8 of 28 SQL SERVER – PAGEIOLATCH_DT, PAGEIOLATCH_EX, PAGEIOLATCH_KP, PAGEIOLATCH_SH, PAGEIOLATCH_UP – Wait Type – Day 9 of 28 SQL SERVER – IO_COMPLETION – Wait Type – Day 10 of 28 SQL SERVER – ASYNC_IO_COMPLETION – Wait Type – Day 11 of 28 SQL SERVER – PAGELATCH_DT, PAGELATCH_EX, PAGELATCH_KP, PAGELATCH_SH, PAGELATCH_UP – Wait Type – Day 12 of 28 SQL SERVER – FT_IFTS_SCHEDULER_IDLE_WAIT – Full Text – Wait Type – Day 13 of 28 SQL SERVER – BACKUPIO, BACKUPBUFFER – Wait Type – Day 14 of 28 SQL SERVER – LCK_M_XXX – Wait Type – Day 15 of 28 SQL SERVER – Guest Post – Jonathan Kehayias – Wait Type – Day 16 of 28 SQL SERVER – WRITELOG – Wait Type – Day 17 of 28 SQL SERVER – LOGBUFFER – Wait Type – Day 18 of 28 SQL SERVER – PREEMPTIVE and Non-PREEMPTIVE – Wait Type – Day 19 of 28 SQL SERVER – MSQL_XP – Wait Type – Day 20 of 28 SQL SERVER – Guest Posts – Feodor Georgiev – The Context of Our Database Environment – Going Beyond the Internal SQL Server Waits – Wait Type – Day 21 of 28 SQL SERVER – Guest Post – Jacob Sebastian – Filestream – Wait Types – Wait Queues – Day 22 of 28 SQL SERVER – OLEDB – Link Server – Wait Type – Day 23 of 28 SQL SERVER – 2000 – DBCC SQLPERF(waitstats) – Wait Type – Day 24 of 28 SQL SERVER – 2011 – Wait Type – Day 25 of 28 SQL SERVER – Guest Post – Glenn Berry – Wait Type – Day 26 of 28 SQL SERVER – Best Reference – Wait Type – Day 27 of 28 SQL SERVER – Summary of Month – Wait Type – Day 28 of 28 Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Optimization, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, SQLServer, T SQL, Technology

  Read the article

• Silverlight Cream for March 23, 2010 -- #818

  - by Dave Campbell

  In this Issue: Max Paulousky, Jeremy Likness, Mark Tucker, Christian Schormann, Page Brooks, Brad Abrams(-2-), Jeff Wilcox, Unnir, Bea Stollnitz, John Papa and Adam Kinney, and Bill Reiss(-2-). Shoutouts: Ashish Shetty posted his material from his MIX10 presentation: Stepping outside the browser with Silverlight 4 Not Silverlight, but dang useful, Karl Shifflett posted a Visual Studio 2010 XAML Editor IntelliSense Presenter Extension Yavor Georgiev posted his MIX10 material: Two samples from today's MIX talk From SilverlightCream.com: GroupBox Sketching Control for WPF applications Using Blend Max Paulousky creates a GroupBox control for SketchFlow for WPF. He includes a link to an example of doing the same for Silverlight. Sequential Asynchronous Workflows in Silverlight using Coroutines Jeremy Likness' latest post begann with a post on the Silverlight.net forum and Rob Eisenburg's MVVM presentation from MIX10 resulting in the use of Wintellect's PowerThreading library (downloadable), and Coroutines. Windows Phone 7 UI Templates Mark Tucker has been putting a lot of thought into WP7 apps and produced 5 templates for building apps, downloadable in PowerPoint format. He's also looking to discuss this concept. Blend 4: About Path Layout, Part I Christian Schormann has a great tutorial up about Expression Blend 4 and path layout ... this is lots of great info, and it's only part 1! Custom Splash Screen for Windows Phone Page Brooks makes very quick work of showing how to add a splash screen to your WP7 app... very nice, Page! Silverlight 4 + RIA Services - Ready for Business: Exposing Data from Entity Framework Brad Abrams next post in the series is is on pulling your data from wherever it lives, and uses a DomainService to shape it for your Silverlight app. Silverlight 4 + RIA Services - Ready for Business: Consuming Data in the Silverlight Client Brad Abrams then discusses consuming that data in a Silverlight app. Not much code involvement at all.. great ROI :) Building Silverlight 3 and Silverlight 4 applications on a .NET 3.5 build machine Jeff Wilcox talks about building Silverlight 3 and Silverlight 4B both on a .NET 3.5 machine. He then adds in the Toolkit, and even WCF RIA Services. Expression Blend 4 - XAML generation tweaks Unnir demonstrates a few changes to Expression Blend 4 that produce more compact XAML. He's also asking for other examples you'd like to see tightened up. How can I sort a hierarchy? Bea Stollnitz posts plausible solutions to sorting data items at each level of a hierarchical UI, with descriptions of why they don't work, followed by the real deal... Silverlight and WPF. Silverlight Training Course (Silverlight 4) John Papa and Adam Kinney have posted a huge body of work to get us up-to-speed on Silverlight 4 -- a WhitePaper, hands-on labs, and an 8-unit course with 25 accompanying videos... geez... Silverlight game development on Windows Phone 7 Bill Reiss has a post up discussing game development on WP7 in general and then discusses his SilverSprite library, with a link to it. XNA or Silverlight for Windows Phone 7 game development? Bill Reiss next discusses the advantage of using Silverlight or XNA for your WP7 game development, and who better to discuss both? Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• SQLAuthority News – Monthly list of Puzzles and Solutions on SQLAuthority.com

  - by pinaldave

  This month has been very interesting month for SQLAuthority.com we had multiple and various puzzles which everybody participated and lots of interesting conversation which we have shared. Let us start in latest puzzles and continue going down. There are few answers also posted on facebook as well. SQL SERVER – Puzzle Involving NULL – Resolve – Error – Operand data type void type is invalid for sum operator This puzzle involves NULL and throws an error. The challenge is to resolve the error. There are multiple ways to resolve this error. Readers has contributed various methods. Few of them even have supplied the answer why this error is showing up. NULL are very important part of the database and if one of the column has NULL the result can be totally different than the one expected. SQL SERVER – T-SQL Scripts to Find Maximum between Two Numbers I modified script provided by friend to find greatest number between two number. My script has small bug in it. However, lots of readers have suggested better scripts. Madhivanan has written blog post on the subject over here. SQL SERVER – BI Quiz Hint – Performance Tuning Cubes – Hints This quiz is hosted on my friend Jacob‘s site. I have written many hints how one can tune cubes. Now one can take part here and win exciting prizes. SQL SERVER – Solution – Generating Zero Without using Any Numbers in T-SQL Madhivanan has asked very interesting question on his blog about How to Generate Zero without using Any Numbers in T-SQL. He has demonstrated various methods how one can generate Zero. I asked the same question on blog and got many interesting answers which I have shared. SQL SERVER – Solution – Puzzle – Statistics are not Updated but are Created Once I have to accept that this was most difficult puzzle. In this puzzle I have asked even though settings are correct, why statistics of the tables are not getting updated. In this puzzle one is tested with various concepts 1) Indexes, 2) Statistics, 3) database settings etc. There are multiple ways of solving this puzzles. It was interesting as many took interest but only few got it right. SQL SERVER – Question to You – When to use Function and When to use Stored Procedure This is rather straight forward question and not the typical puzzle. The answers from readers are great however, still there is chance of more detailed answers. SQL SERVER – Selecting Domain from Email Address I wrote on selecting domains from email addresses. Madhivanan makes puzzle out of a simple question. He wrote a follow-up post over here. In his post he writes various way how one can find email addresses from list of domains. Well, this is not a puzzle but amazing Guest Post by Feodor Georgiev who has written on subject Job Interviewing the Right Way (and for the Right Reasons). An article which everyone should read. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, Readers Contribution, Readers Question, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology

  Read the article

• Windows Azure: General Availability of Web Sites + Mobile Services, New AutoScale + Alerts Support, No Credit Card Needed for MSDN

  - by ScottGu

  This morning we released a major set of updates to Windows Azure.  These updates included: Web Sites: General Availability Release of Windows Azure Web Sites with SLA Mobile Services: General Availability Release of Windows Azure Mobile Services with SLA Auto-Scale: New automatic scaling support for Web Sites, Cloud Services and Virtual Machines Alerts/Notifications: New email alerting support for all Compute Services (Web Sites, Mobile Services, Cloud Services, and Virtual Machines) MSDN: No more credit card requirement for sign-up All of these improvements are now available to use immediately (note: some are still in preview).  Below are more details about them. Web Sites: General Availability Release of Windows Azure Web Sites I’m incredibly excited to announce the General Availability release of Windows Azure Web Sites. The Windows Azure Web Sites service is perfect for hosting a web presence, building customer engagement solutions, and delivering business web apps.  Today’s General Availability release means we are taking off the “preview” tag from the Free and Standard (formerly called reserved) tiers of Windows Azure Web Sites.  This means we are providing: A 99.9% monthly SLA (Service Level Agreement) for the Standard tier Microsoft Support available on a 24x7 basis (with plans that range from developer plans to enterprise Premier support) The Free tier runs in a shared compute environment and supports up to 10 web sites. While the Free tier does not come with an SLA, it works great for rapid development and testing and enables you to quickly spike out ideas at no cost. The Standard tier, which was called “Reserved” during the preview, runs using dedicated per-customer VM instances for great performance, isolation and scalability, and enables you to host up to 500 different Web sites within them.  You can easily scale your Standard instances on-demand using the Windows Azure Management Portal.  You can adjust VM instance sizes from a Small instance size (1 core, 1.75GB of RAM), up to a Medium instance size (2 core, 3.5GB of RAM), or Large instance (4 cores and 7 GB RAM).  You can choose to run between 1 and 10 Standard instances, enabling you to easily scale up your web backend to 40 cores of CPU and 70GB of RAM: Today’s release also includes general availability support for custom domain SSL certificate bindings for web sites running using the Standard tier. Customers will be able to utilize certificates they purchase for their custom domains and use either SNI or IP based SSL encryption. SNI encryption is available for all modern browsers and does not require an IP address.  SSL certificates can be used for individual sites or wild-card mapped across multiple sites (we charge extra for the use of a SSL cert – but the fee is per-cert and not per site which means you pay once for it regardless of how many sites you use it with).  Today’s release also includes the following new features: Auto-Scale support Today’s Windows Azure release adds preview support for Auto-Scaling web sites.  This enables you to setup automatic scale rules based on the activity of your instances – allowing you to automatically scale down (and save money) when they are below a CPU threshold you define, and automatically scale up quickly when traffic increases.  See below for more details. 64-bit and 32-bit mode support You can now choose to run your standard tier instances in either 32-bit or 64-bit mode (previously they only ran in 32-bit mode).  This enables you to address even more memory within individual web applications. Memory dumps Memory dumps can be very useful for diagnosing issues and debugging apps. Using a REST API, you can now get a memory dump of your sites, which you can then use for investigating issues in Visual Studio Debugger, WinDbg, and other tools. Scaling Sites Independently Prior to today’s release, all sites scaled up/down together whenever you scaled any site in a sub-region. So you may have had to keep your proof-of-concept or testing sites in a separate sub-region if you wanted to keep them in the Free tier. This will no longer be necessary.  Windows Azure Web Sites can now mix different tier levels in the same geographic sub-region. This allows you, for example, to selectively move some of your sites in the West US sub-region up to Standard tier when they require the features, scalability, and SLA of the Standard tier. Full pricing details on Windows Azure Web Sites can be found here.  Note that the “Shared Tier” of Windows Azure Web Sites remains in preview mode (and continues to have discounted preview pricing).  Mobile Services: General Availability Release of Windows Azure Mobile Services I’m incredibly excited to announce the General Availability release of Windows Azure Mobile Services.  Mobile Services is perfect for building scalable cloud back-ends for Windows 8.x, Windows Phone, Apple iOS, Android, and HTML/JavaScript applications.  Customers We’ve seen tremendous adoption of Windows Azure Mobile Services since we first previewed it last September, and more than 20,000 customers are now running mobile back-ends in production using it.  These customers range from startups like Yatterbox, to university students using Mobile Services to complete apps like Sly Fox in their spare time, to media giants like Verdens Gang finding new ways to deliver content, and telcos like TalkTalk Business delivering the up-to-the-minute information their customers require.  In today’s Build keynote, we demonstrated how TalkTalk Business is using Windows Azure Mobile Services to deliver service, outage and billing information to its customers, wherever they might be. Partners When we unveiled the source control and Custom API features I blogged about two weeks ago, we enabled a range of new scenarios, one of which is a more flexible way to work with third party services.  The following blogs, samples and tutorials from our partners cover great ways you can extend Mobile Services to help you build rich modern apps: New Relic allows developers to monitor and manage the end-to-end performance of iOS and Android applications connected to Mobile Services. SendGrid eliminates the complexity of sending email from Mobile Services, saving time and money, while providing reliable delivery to the inbox. Twilio provides a telephony infrastructure web service in the cloud that you can use with Mobile Services to integrate phone calls, text messages and IP voice communications into your mobile apps. Xamarin provides a Mobile Services add on to make it easy building cross-platform connected mobile aps. Pusher allows quickly and securely add scalable real-time messaging functionality to Mobile Services-based web and mobile apps. Visual Studio 2013 and Windows 8.1 This week during //build/ keynote, we demonstrated how Visual Studio 2013, Mobile Services and Windows 8.1 make building connected apps easier than ever. Developers building Windows 8 applications in Visual Studio can now connect them to Windows Azure Mobile Services by simply right clicking then choosing Add Connected Service. You can either create a new Mobile Service or choose existing Mobile Service in the Add Connected Service dialog. Once completed, Visual Studio adds a reference to Mobile Services SDK to your project and generates a Mobile Services client initialization snippet automatically. Add Push Notifications Push Notifications and Live Tiles are a key to building engaging experiences. Visual Studio 2013 and Mobile Services make it super easy to add push notifications to your Windows 8.1 app, by clicking Add a Push Notification item: The Add Push Notification wizard will then guide you through the registration with the Windows Store as well as connecting your app to a new or existing mobile service. Upon completion of the wizard, Visual Studio will configure your mobile service with the WNS credentials, as well as add sample logic to your client project and your mobile service that demonstrates how to send push notifications to your app. Server Explorer Integration In Visual Studio 2013 you can also now view your Mobile Services in the the Server Explorer. You can add tables, edit, and save server side scripts without ever leaving Visual Studio, as shown on the image below: Pricing With today’s general availability release we are announcing that we will be offering Mobile Services in three tiers – Free, Standard, and Premium.  Each tier is metered using a simple pricing model based on the # of API calls (bandwidth is included at no extra charge), and the Standard and Premium tiers are backed by 99.9% monthly SLAs.  You can elastically scale up or down the number of instances you have of each tier to increase the # of API requests your service can support – allowing you to efficiently scale as your business grows. The following table summarizes the new pricing model (full pricing details here):   You can find the full details of the new pricing model here. Build Conference Talks The //BUILD/ conference will be packed with sessions covering every aspect of developing connected applications with Mobile Services. The best part is that, even if you can’t be with us in San Francisco, every session is being streamed live. Be sure not to miss these talks: Mobile Services – Soup to Nuts — Josh Twist Building Cross-Platform Apps with Windows Azure Mobile Services — Chris Risner Connected Windows Phone Apps made Easy with Mobile Services — Yavor Georgiev Build Connected Windows 8.1 Apps with Mobile Services — Nick Harris Who’s that user? Identity in Mobile Apps — Dinesh Kulkarni Building REST Services with JavaScript — Nathan Totten Going Live and Beyond with Windows Azure Mobile Services — Kirill Gavrylyuk , Paul Batum Protips for Windows Azure Mobile Services — Chris Risner AutoScale: Dynamically scale up/down your app based on real-world usage One of the key benefits of Windows Azure is that you can dynamically scale your application in response to changing demand. In the past, though, you have had to either manually change the scale of your application, or use additional tooling (such as WASABi or MetricsHub) to automatically scale your application. Today, we’re announcing that AutoScale will be built-into Windows Azure directly.  With today’s release it is now enabled for Cloud Services, Virtual Machines and Web Sites (Mobile Services support will come soon). Auto-scale enables you to configure Windows Azure to automatically scale your application dynamically on your behalf (without any manual intervention) so you can achieve the ideal performance and cost balance. Once configured it will regularly adjust the number of instances running in response to the load in your application. Currently, we support two different load metrics: CPU percentage Storage queue depth (Cloud Services and Virtual Machines only) We’ll enable automatic scaling on even more scale metrics in future updates. When to use Auto-Scale The following are good criteria for services/apps that will benefit from the use of auto-scale: The service/app can scale horizontally (e.g. it can be duplicated to multiple instances) The service/app load changes over time If your app meets these criteria, then you should look to leverage auto-scale. How to Enable Auto-Scale To enable auto-scale, simply navigate to the Scale tab in the Windows Azure Management Portal for the app/service you wish to enable.  Within the scale tab turn the Auto-Scale setting on to either CPU or Queue (for Cloud Services and VMs) to enable Auto-Scale.  Then change the instance count and target CPU settings to configure the Auto-Scale ranges you want to maintain. The image below demonstrates how to enable Auto-Scale on a Windows Azure Web-Site.  I’ve configured the web-site so that it will run using between 1 and 5 VM instances.  The exact # used will depend on the aggregate CPU of the VMs using the 40-70% range I’ve configured below.  If the aggregate CPU goes above 70%, then Windows Azure will automatically add new VMs to the pool (up to the maximum of 5 instances I’ve configured it to use).  If the aggregate CPU drops below 40% then Windows Azure will automatically start shutting down VMs to save me money: Once you’ve turned auto-scale on, you can return to the Scale tab at any point and select Off to manually set the number of instances. Using the Auto-Scale Preview With today’s update you can now, in just a few minutes, have Windows Azure automatically adjust the number of instances you have running  in your apps to keep your service performant at an even better cost. Auto-scale is being released today as a preview feature, and will be free until General Availability. During preview, each subscription is limited to 10 separate auto-scale rules across all of the resources they have (Web sites, Cloud services or Virtual Machines). If you hit the 10 limit, you can disable auto-scale for any resource to enable it for another. Alerts and Notifications Starting today we are now providing the ability to configure threshold based alerts on monitoring metrics. This feature is available for compute services (cloud services, VM, websites and mobiles services). Alerts provide you the ability to get proactively notified of active or impending issues within your application.  You can define alert rules for: Virtual machine monitoring metrics that are collected from the host operating system (CPU percentage, network in/out, disk read bytes/sec and disk write bytes/sec) and on monitoring metrics from monitoring web endpoint urls (response time and uptime) that you have configured. Cloud service monitoring metrics that are collected from the host operating system (same as VM), monitoring metrics from the guest VM (from performance counters within the VM) and on monitoring metrics from monitoring web endpoint urls (response time and uptime) that you have configured. For Web Sites and Mobile Services, alerting rules can be configured on monitoring metrics from monitoring endpoint urls (response time and uptime) that you have configured. Creating Alert Rules You can add an alert rule for a monitoring metric by navigating to the Setting -> Alerts tab in the Windows Azure Management Portal. Click on the Add Rule button to create an alert rule. Give the alert rule a name and optionally add a description. Then pick the service which you want to define the alert rule on: The next step in the alert creation wizard will then filter the monitoring metrics based on the service you selected:   Once created the rule will show up in your alerts list within the settings tab: The rule above is defined as “not activated” since it hasn’t tripped over the CPU threshold we set.  If the CPU on the above machine goes over the limit, though, I’ll get an email notifying me from an Windows Azure Alerts email address ([email protected]). And when I log into the portal and revisit the alerts tab I’ll see it highlighted in red.  Clicking it will then enable me to see what is causing it to fail, as well as view the history of when it has happened in the past. Alert Notifications With today’s initial preview you can now easily create alerting rules based on monitoring metrics and get notified on active or impending issues within your application that require attention. During preview, each subscription is limited to 10 alert rules across all of the services that support alert rules. No More Credit Card Requirement for MSDN Subscribers Earlier this month (during TechEd 2013), Windows Azure announced that MSDN users will get Windows Azure Credits every month that they can use for any Windows Azure services they want. You can read details about this in my previous Dev/Test blog post. Today we are making further updates to enable an easier Windows Azure signup for MSDN users. MSDN users will now not be required to provide payment information (e.g. no credit card) during sign-up, so long as they use the service within the included monetary credit for the billing period. For usage beyond the monetary credit, they can enable overages by providing the payment information and remove the spending limit. This enables a super easy, one page sign-up experience for MSDN users.  Simply sign-up for your Windows Azure trial using the same Microsoft ID that you use to manage your MSDN account, then complete the one page sign-up form below and you will be able to spend your free monthly MSDN credits (up to $150 each month) on any Windows Azure resource for dev/test:   This makes it trivially easy for every MDSN customer to start using Windows Azure today.  If you haven’t signed up yet, I definitely recommend checking it out. Summary Today’s release includes a ton of great features that enable you to build even better cloud solutions.  If you don’t already have a Windows Azure account, you can sign-up for a free trial and start using all of the above features today.  Then visit the Windows Azure Developer Center to learn more about how to build apps with it. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

  Read the article

1