Search Results

Search found 51 results on 3 pages for 'kdc'.

Page 1/3 | 1 2 3  | Next Page >

• How to repair multiple KDC an Netlogon errors

  - by Keith Sirmons

  Howdy, I have several erros in the system event log of my single Windows 2003 SP2 domain controller. Multiple member computers on the domain are listed in these errors. I am seeing two similar errors for each computer one second apart in the event log. Event ID 7 Source KDC The Security Account Manager failed a KDC request in an unexpected way. The error is in the data field. The account name was [email protected] and lookup type 0x8. followed by Event ID 7 Source KDC The Security Account Manager failed a KDC request in an unexpected way. The error is in the data field. The account name was MEMBERNAME$ and lookup type 0x8. The Lookup Types are also different, I have 0x8, 0x28, 0x0, 0x20. I am also receiving other authentication errors in the same time frame as all of the KDC errors Event ID 5722 Source NETLOGON The session setup from the computer MEMBERNAME failed to authenticate. The name(s) of the account(s) referenced in the security database is MEMBERNAME$. The following error occurred: Access is denied. I have run dcdiag /v to see if there was something wrong with Active Directory, but all tests passed. I also ran netdiag /v and it appers all of those tests ran. Any ideas on where to start for this issue? Thank you, Keith

  Read the article

• Oracle with Kerberos authentication and Windows 2003 Server as KDC

  - by Supaplex

  I am running Oracle 10.2 on a Windows 2003 Server SP2 which is also the domain controller on the network. I wish to switch authentication method from NTS to Kerberos. I have spent a lot of time trying to configure Oracle with Kerberos authentication from the Oracle Advanced Security option from the Net Manager utility. I have disabled NTS so Kerberos is promoted as the preferred authentication method. But as soon as the configuration is saved from Net Manager and I restart the Oracle server service, Oracle will not start. I don't know what Oracle is complaining about, because I don't know where to look for the Oracle error log. My first question is: how can I figure out what's bugging Oracle? My second question: is there a good tutorial for setting up Oracle on a Windows 2003 with Kerberos Authentication, where the Windows 2003 Server is the KDC? Maybe there is a book I can get? I have read Oracles own guide, but it is mostly for Linux/Unix. Thanks a lot!

  Read the article

• Oracle with Kerberos authentication and Windows 2003 Server as KDC

  - by Supaplex

  Hello everyone. I am running Oracle 10.2 on a Windows 2003 Server SP2 which is also the domain controller on the network. I wish to switch authentication method from NTS to Kerberos. I have spent a lot of time trying to configure Oracle with Kerberos authentication from the Oracle Advanced Security option from the Net Manager utility. I have disabled NTS so Kerberos is promoted as the preferred authentication method. But as soon as the configuration is saved from Net Manager and I restart the Oracle server service, Oracle will not start. I don't know what Oracle is complaining about, because I don't know where to look for the Oracle error log. My first question is: how can I figure out what's bugging Oracle? My second question: is there a good tutorial for setting up Oracle on a Windows 2003 with Kerberos Authentication, where the Windows 2003 Server is the KDC? Maybe there is a book I can get? I have read Oracles own guide, but it is mostly for Linux/Unix. Thanks a lot!

  Read the article

• Can't join OS X Mavericks to AD Domain

  - by watkipet

  I'm attempting to join an OS X Mavericks (10.9) client to a Windows Server 2008 Active Directory domain, however the bind fails with this error in the OS X client's system.log: Oct 24 15:03:15 host.domain.com com.apple.preferences.users.remoteservice[5547]: -[ODCAddServerSheetController handleOtherActionError: gotError: Error Domain=com.apple.OpenDirectory Code=5202 "Authentication server encountered an error while attempting the requested operation." UserInfo=0x7f9e6cb3e180 {NSLocalizedDescription=Authentication server encountered an error while attempting the requested operation., NSLocalizedFailureReason=Authentication server encountered an error while attempting the requested operation.}, Authentication server encountered an error while attempting the requested operation. I've joined (bound) Ubuntu Linux clients to the same domain with net ads join in the past with no problems (using the same administrative user). I don't have access to any server logs. Here's the GUI error (from Directory Utility) on the OS X client: Here's the GUI error (from User's and Groups) in System Preferences on the OS X client: Update After some Wiresharking I've got some more info: OS X Client - KDC (over UDP): AS_REQ (no padata) OS X Client <- KDC (over UDP): KRB5KDC_ERR_PREAUTH_REQUIRED OS X Client - KDC (over UDP): AS_REQ (this time with PA-ENC-TIMESTAMP in padata) OS X Client <- KDC (over UDP): KRB5KDC_ERR_RESPONSE_TOO_BIG OS X Client - KDC (over TCP): AS_REQ (also with PA-ENC-TIMESTAMP in padata) OS X Client <- KDC (over TCP): KDC_ERR_ETYPE_NOSUPP ...and that's it. This is what I think is going on: The OS X client sends a kerberos request. The KDC says, "You need to pre-authenticate. Try again" The OS X client tries to pre-authenticate (all this so far is over UDP) Something gets lost on our network and the KDC says, "Oops something went wrong" The OS X client switches to TCP and tries again. Over TCP, the KDC says, "You're using an encryption type I don't support" Note that in its padata records, the OS X client is always using "aes256-cts-hmac-sha1-96" as its encryption type. However, in its KDC_REQ_BODY record it lists the aes256-cts-hmac-sha1-96, aes128-cts-hmac-sha1-96, des3-cbc-sha1, and rc4-hmac encryption types. When the KDC comes back with KDC_ERR_ETYPE_NOSUPP, it uses rc4-hmac as its encryption type in its padata record. I know next to nothing about Kerberos, but it seems to me that the OS X client should go ahead and try the rc4-hmac encryption type. However, it does nothing after this. Update 2 Here's the debug log from Directory Services on the OS X client. Sorry--it's long. 2013-10-25 14:19:13.219128 PDT - 10544.20463 - ODNodeCustomCall request, NodeID: 52A65FAE-4B24-455D-86EC-2199A780D234, Code: 80 2013-10-25 14:19:13.220409 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - client requested OU - 'CN=Computers,DC=domain,DC=com' 2013-10-25 14:19:13.220427 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - Binding using '[email protected]' for kerberos ID 2013-10-25 14:19:13.220571 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - new kerberos credential cache 'MEMORY:0x7fa713635470' for '[email protected]' 2013-10-25 14:19:13.220623 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: loop 1 2013-10-25 14:19:13.220639 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - KDC send 0 patypes 2013-10-25 14:19:13.220653 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - fast disabled, not doing any fast wrapping 2013-10-25 14:19:13.220699 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - Trying to find service kdc for realm DOMAIN.COM flags 0 2013-10-25 14:19:13.221275 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - submissing new requests to new host 2013-10-25 14:19:13.221326 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to host: udp 192.168.0.1:kerberos (192.168.0.1) tid: 00000001 2013-10-25 14:19:13.221373 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - writing packet: udp 192.168.0.1:kerberos (192.168.0.1) tid: 00000001 2013-10-25 14:19:13.222588 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - reading packet: udp 192.168.0.1:kerberos (192.168.0.1) tid: 00000001 2013-10-25 14:19:13.222617 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - host completed: udp 192.168.0.1:kerberos (192.168.0.1) tid: 00000001 2013-10-25 14:19:13.222665 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_sendto_context DOMAIN.COM done: 0 hosts 1 packets 1 wc: 0.001960 nr: 0.000000 kh: 0.000560 tid: 00000001 2013-10-25 14:19:13.222705 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: loop 2 2013-10-25 14:19:13.222737 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: processing input 2013-10-25 14:19:13.222752 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: got an KRB-ERROR from KDC 2013-10-25 14:19:13.222775 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: KRB-ERROR -1765328359/Additional pre-authentication required 2013-10-25 14:19:13.222791 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - KDC send 4 patypes 2013-10-25 14:19:13.222800 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - KDC send PA-DATA type: 19 2013-10-25 14:19:13.222808 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - KDC send PA-DATA type: 2 2013-10-25 14:19:13.222816 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - KDC send PA-DATA type: 16 2013-10-25 14:19:13.222825 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - KDC send PA-DATA type: 15 2013-10-25 14:19:13.222840 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: using ENC-TS with enctype 18 2013-10-25 14:19:13.222850 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: using default_s2k_func 2013-10-25 14:19:13.227443 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - fast disabled, not doing any fast wrapping 2013-10-25 14:19:13.227502 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - Trying to find service kdc for realm DOMAIN.COM flags 0 2013-10-25 14:19:13.228233 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - submissing new requests to new host 2013-10-25 14:19:13.228320 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to host: udp 192.168.0.1:kerberos (192.168.0.1) tid: 00010001 2013-10-25 14:19:13.228374 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - writing packet: udp 192.168.0.1:kerberos (192.168.0.1) tid: 00010001 2013-10-25 14:19:13.229930 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - reading packet: udp 192.168.0.1:kerberos (192.168.0.1) tid: 00010001 2013-10-25 14:19:13.229957 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - host completed: udp 192.168.0.1:kerberos (192.168.0.1) tid: 00010001 2013-10-25 14:19:13.229975 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_sendto trying over again (reset): 0 2013-10-25 14:19:13.230023 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - Trying to find service kdc for realm DOMAIN.COM flags 2 2013-10-25 14:19:13.230664 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - submissing new requests to new host 2013-10-25 14:19:13.230726 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to host: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00010002 2013-10-25 14:19:13.230818 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to 11: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00010002 2013-10-25 14:19:13.231101 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - writing packet: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00010002 2013-10-25 14:19:13.232743 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - reading packet: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00010002 2013-10-25 14:19:13.232777 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - host completed: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00010002 2013-10-25 14:19:13.232798 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_sendto_context DOMAIN.COM done: 0 hosts 2 packets 2 wc: 0.005316 nr: 0.000000 kh: 0.001339 tid: 00010002 2013-10-25 14:19:13.232856 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: loop 3 2013-10-25 14:19:13.232868 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: processing input 2013-10-25 14:19:13.232900 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: using keyproc 2013-10-25 14:19:13.232910 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: using default_s2k_func 2013-10-25 14:19:13.236487 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: extracting ticket 2013-10-25 14:19:13.236557 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: wc: 0.015944 2013-10-25 14:19:13.237022 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - Trying to find service kdc for realm DOMAIN.COM flags 2 2013-10-25 14:19:13.237444 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - submissing new requests to new host 2013-10-25 14:19:13.237482 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to host: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00020001 2013-10-25 14:19:13.237551 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to 11: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00020001 2013-10-25 14:19:13.237900 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - writing packet: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00020001 2013-10-25 14:19:13.238616 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - reading packet: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00020001 2013-10-25 14:19:13.238645 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - host completed: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00020001 2013-10-25 14:19:13.238674 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_sendto_context DOMAIN.COM done: 0 hosts 1 packets 1 wc: 0.001656 nr: 0.000000 kh: 0.000409 tid: 00020001 2013-10-25 14:19:13.238839 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - Trying to find service kdc for realm DOMAIN.COM flags 2 2013-10-25 14:19:13.239302 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - submissing new requests to new host 2013-10-25 14:19:13.239360 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to host: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00030001 2013-10-25 14:19:13.239429 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to 11: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00030001 2013-10-25 14:19:13.239683 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - writing packet: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00030001 2013-10-25 14:19:13.240350 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - reading packet: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00030001 2013-10-25 14:19:13.240387 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - host completed: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00030001 2013-10-25 14:19:13.240415 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_sendto_context DOMAIN.COM done: 0 hosts 1 packets 1 wc: 0.001578 nr: 0.000000 kh: 0.000445 tid: 00030001 2013-10-25 14:19:13.240514 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_credentials_with_flags: DOMAIN.COM wc: 0.003615 2013-10-25 14:19:13.240537 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - valid credentials for [email protected] 2013-10-25 14:19:13.240541 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - switching to cache 'MEMORY:0x7fa713635470' 2013-10-25 14:19:13.240545 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - switching GSS to cache 'MEMORY:0x7fa713635470 2013-10-25 14:19:13.240555 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - Bind Step 5 - Bind/Join computer to domain - 'domain.com' 2013-10-25 14:19:13.241345 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - resolving 'server.domain.com' 2013-10-25 14:19:13.241646 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - added socket 12 for host 'server.domain.com:389' address '192.168.0.2' to kqueue list 2013-10-25 14:19:13.241930 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - Setting kerberos server for 'Kerberos:DOMAIN.COM' to 'server.domain.com' 2013-10-25 14:19:13.241962 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - switching to cache 'MEMORY:0x7fa713635470' 2013-10-25 14:19:13.241969 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - switching GSS to cache 'MEMORY:0x7fa713635470 2013-10-25 14:19:13.242231 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - GSSAPI allow Confidentiality 2013-10-25 14:19:13.242234 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - setting realm 'DOMAIN.COM' for node '/Active Directory/domain.com' 2013-10-25 14:19:13.242239 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - GSSAPI allow Integrity (signing) 2013-10-25 14:19:13.242274 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - GSSAPI using hostname 'server.domain.com' 2013-10-25 14:19:13.242282 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - GSSAPI using initiator credential '[email protected]' 2013-10-25 14:19:13.250771 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - Authenticate to LDAP using Kerberos credential - 0 2013-10-25 14:19:13.250784 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - verified connectivity to '192.168.0.2' with socket 12 2013-10-25 14:19:13.251513 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - locating site using domain domain.com using CLDAP 2013-10-25 14:19:13.252145 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - using site of 'DOMAINGROUP' from CLDAP 2013-10-25 14:19:13.253626 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - resolving 'server2.domain.com' 2013-10-25 14:19:13.253933 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - added socket 13 for host 'server2.domain.com:389' address '192.168.0.1' to kqueue list 2013-10-25 14:19:13.254428 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - Setting kerberos server for 'Kerberos:DOMAIN.COM' to 'server2.domain.com' 2013-10-25 14:19:13.254462 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - switching to cache 'MEMORY:0x7fa713635470' 2013-10-25 14:19:13.254468 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - switching GSS to cache 'MEMORY:0x7fa713635470 2013-10-25 14:19:13.254617 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - setting realm 'DOMAIN.COM' for node '/Active Directory/domain.com' 2013-10-25 14:19:13.254661 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - GSSAPI allow Confidentiality 2013-10-25 14:19:13.254670 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - GSSAPI allow Integrity (signing) 2013-10-25 14:19:13.254689 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - GSSAPI using hostname 'server2.domain.com' 2013-10-25 14:19:13.254695 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - GSSAPI using initiator credential '[email protected]' 2013-10-25 14:19:13.262092 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - Authenticate to LDAP using Kerberos credential - 0 2013-10-25 14:19:13.262108 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - verified connectivity to '192.168.0.1' with socket 13 2013-10-25 14:19:13.262982 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - Computer account either already exists or DC is already Read/Write 2013-10-25 14:19:13.264968 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - Adding record 'cn=spike,CN=Computers,DC=domain,DC=com' in 'domain.com' The failure point seems to be Computer account either already exists or DC is already Read/Write, however, I can search for 'spike' on the Active Directory server using Active Directory Explorer and it's not there. If I do the same search for the Linux and Windows PCs I added previously, I can find them.

  Read the article

• heimdal error Decrypt integrity check failed for checksum type

  - by user880414

  when I try to authentication with heimdal-kdc ,I get this error in kdc log : (enctype aes256-cts-hmac-sha1-96) error Decrypt integrity check failed for checksum type hmac-sha1-96-aes256, key type aes256-cts-hmac-sha1-96 and authentication failed!!! but authentication with kinit is correct!! my kerb5.conf is [logging] default = FILE:/var/log/krb5libs.log kdc = FILE:/var/log/krb5kdc.log krb5 = FILE:/var/log/krb5.log [libdefaults] default_realm = AUTH.LANGHUA clockskew = 300 [realms] AUTH.LANGHUA = { kdc = AUTH.LANGHUA } [domain_realm] .langhua = AUTH.LANGHUA [kdc] and when add this line to krb5.conf (in kdc tag) require-preauth = no I get this error krb5_get_init_creds: Client have no reply key

  Read the article

• Windows Server 2008 Services won't start after patch

  - by Antitribu

  After installing the run of the mill patches today on a Windows Server 2008 (Running as an AD controller and Exchange 2007 Server) the machine came back up with "configuring updates stage 3 of 3 0% complete". The machine had been kept reasonably up to date so this likely was caused by a very recent patch. At the leaste the following patches were installed: KB973037 KB969947 KB973565 Restarting the server into safe mode and then subsequently rebooting (with no changes made) allowed the computer to restart and I can now log in normally. However none of the critical services start; including but not limited to Exchange, DNS and Terminal Services (Obviously if DNS doesn't start other things will break). I am unable to run Internet Explorer but Chrome will work. There are no meaningful errors in the event logs as to why services won't start. Under KDC I have The Key Distribution Center (KDC) cannot find a suitable certificate to use for smart card logons, or the KDC certificate could not be verified. Smart card logon may not function correctly if this problem is not resolved. To correct this problem, either verify the existing KDC certificate using certutil.exe or enroll for a new KDC certificate. This is going to be an evil one to debug and I'm kinda hoping someone has encountered it and knows the answer off hand. Thanks all.

  Read the article

• Python/Biophysics- Trying to code a simple stochastic simulation!

  - by user359597

  Hey guys- I'm trying to figure out what to make of the following code- this is not the clear, intuitive python I've been learning. Was it written in C or something then wrapped in a python fxn? The code I wrote (not shown) is using the same math, but I couldn't figure out how to write a conditional loop. If anyone could explain/decipher/clean this up, I'd be really appreciative. I mean- is this 'good' python- or does it look funky? I'm brand new to this- but it's like the order of the fxns is messed up? I understand Gillespie's- I've successfully coded several simpler simulations. So in a nutshell- good code-(pythonic)? order? c? improvements? am i being an idiot? The code shown is the 'answer,' to the following question from a biophysics text (petri-net not shown and honestly not necessary to understand problem): "In a programming language of your choice, implement Gillespie’s First Reaction Algorithm to study the temporal behaviour of the reaction A---B in which the transition from A to B can only take place if another compound, C, is present, and where C dynamically interconverts with D, as modelled in the Petri-net below. Assume that there are 100 molecules of A, 1 of C, and no B or D present at the start of the reaction. Set kAB to 0.1 s-1 and both kCD and kDC to 1.0 s-1. Simulate the behaviour of the system over 100 s." def sim(): # Set the rate constants for all transitions kAB = 0.1 kCD = 1.0 kDC = 1.0 # Set up the initial state A = 100 B = 0 C = 1 D = 0 # Set the start and end times t = 0.0 tEnd = 100.0 print "Time\t", "Transition\t", "A\t", "B\t", "C\t", "D" # Compute the first interval transition, interval = transitionData(A, B, C, D, kAB, kCD, kDC) # Loop until the end time is exceded or no transition can fire any more while t <= tEnd and transition >= 0: print t, '\t', transition, '\t', A, '\t', B, '\t', C, '\t', D t += interval if transition == 0: A -= 1 B += 1 if transition == 1: C -= 1 D += 1 if transition == 2: C += 1 D -= 1 transition, interval = transitionData(A, B, C, D, kAB, kCD, kDC) def transitionData(A, B, C, D, kAB, kCD, kDC): """ Returns nTransition, the number of the firing transition (0: A->B, 1: C->D, 2: D->C), and interval, the interval between the time of the previous transition and that of the current one. """ RAB = kAB * A * C RCD = kCD * C RDC = kDC * D dt = [-1.0, -1.0, -1.0] if RAB > 0.0: dt[0] = -math.log(1.0 - random.random())/RAB if RCD > 0.0: dt[1] = -math.log(1.0 - random.random())/RCD if RDC > 0.0: dt[2] = -math.log(1.0 - random.random())/RDC interval = 1e36 transition = -1 for n in range(len(dt)): if dt[n] > 0.0 and dt[n] < interval: interval = dt[n] transition = n return transition, interval if __name__ == '__main__': sim()

  Read the article

• Python/Biomolecular Physics- Trying to code a simple stochastic simulation of a system exhibiting co

  - by user359597

  *edited 6/17/10 I'm trying to understand how to improve my code (make it more pythonic). Also, I'm interested in writing more intuitive 'conditionals' that would describe scenarios that are commonplace in biochemistry. The conditional criteria in the below program is explained in Answer #2, but I am not satisfied with it- it is correct, but isn't obvious and isn't easy to implement for more complicated conditional scenarios. Ideas welcome. Comments/criticisms welcome. First posting experience @ stackoverflow- please comment on etiquette if needed. The code generates a list of values that are the solution to the following exercise: "In a programming language of your choice, implement Gillespie’s First Reaction Algorithm to study the temporal behaviour of the reaction A---B in which the transition from A to B can only take place if another compound, C, is present, and where C dynamically interconverts with D, as modelled in the Petri-net below. Assume that there are 100 molecules of A, 1 of C, and no B or D present at the start of the reaction. Set kAB to 0.1 s-1 and both kCD and kDC to 1.0 s-1. Simulate the behaviour of the system over 100 s." def sim(): # Set the rate constants for all transitions kAB = 0.1 kCD = 1.0 kDC = 1.0 # Set up the initial state A = 100 B = 0 C = 1 D = 0 # Set the start and end times t = 0.0 tEnd = 100.0 print "Time\t", "Transition\t", "A\t", "B\t", "C\t", "D" # Compute the first interval transition, interval = transitionData(A, B, C, D, kAB, kCD, kDC) # Loop until the end time is exceded or no transition can fire any more while t <= tEnd and transition >= 0: print t, '\t', transition, '\t', A, '\t', B, '\t', C, '\t', D t += interval if transition == 0: A -= 1 B += 1 if transition == 1: C -= 1 D += 1 if transition == 2: C += 1 D -= 1 transition, interval = transitionData(A, B, C, D, kAB, kCD, kDC) def transitionData(A, B, C, D, kAB, kCD, kDC): """ Returns nTransition, the number of the firing transition (0: A->B, 1: C->D, 2: D->C), and interval, the interval between the time of the previous transition and that of the current one. """ RAB = kAB * A * C RCD = kCD * C RDC = kDC * D dt = [-1.0, -1.0, -1.0] if RAB > 0.0: dt[0] = -math.log(1.0 - random.random())/RAB if RCD > 0.0: dt[1] = -math.log(1.0 - random.random())/RCD if RDC > 0.0: dt[2] = -math.log(1.0 - random.random())/RDC interval = 1e36 transition = -1 for n in range(len(dt)): if dt[n] > 0.0 and dt[n] < interval: interval = dt[n] transition = n return transition, interval if __name__ == '__main__': sim()

  Read the article

• How to Change the Kerberos Default Ticket Lifetime

  - by user40497

  Our KDC servers are running either Ubuntu Dapper (2.6.15-28) or Hardy (2.6.24-19). The Kerberos software is the MIT implementation of Kerberos 5. By default, a Kerberos ticket lasts for 10 hours. However, we'd like to increase it a bit (e.g. 14 hours) to suit our needs better. I had done the following but the ticket lifetime still stays at 10 hours: 1) On all the KDC servers, set the following parameter under [realms] in /etc/krb5kdc/kdc.conf and restarted the KDC daemon: max_life = 14h 0m 0s 2) Via "kadmin", changed the "maxlife" for a test principal via "modprinc -maxlife 14hours ". "getprinc " shows that the maximum ticket life is indeed 14 hours: Maximum ticket life: 0 days 14:00:00 3) On a Kerberos client machine, set the following parameters under [libdefaults], [realms], [domain_realm], and [login] in /etc/krb5.conf (everywhere basically since nothing I tried had worked): ticket_lifetime = 13hrs default_lifetime = 13hrs With the above settings, I suppose that the ticket lifetime would be capped at 13 hours. When I do "k5start -l 14h -t ", I see that the end time for the "renew until" line is now 14 hours from the starting time: Valid starting Expires Service principal 04/13/10 16:42:05 04/14/10 02:42:05 krbtgt/@ renew until 04/14/10 06:42:03 "-l 13h" would make the end time in the "renew until" line 13 hours after the starting time. However, the ticket still expires in 10 hours (04/13 16:42:05 - 014/14 02:42:05). Am I not changing the right configuration file(s)/parameter(s), not specifying the right option when obtaining a Kerberos ticket, or something else? Any feedback is greatly appreciated! Thank you!

  Read the article

• Windows Vista and 7 crossrealm authentication MIT Kerberos

  - by fox8

  I'm using Windows Server 2008 and Windows Vista and 7 for cross realm authentication using MIT Kerberos 1.6 but when i try to login with a user the KDC answers: (wireshark output) error_code: KRB5KDC_ERR_ETYPE_NOSUPP (14) ... e-text: BAD_ENCRYPTION_TYPE I want to know how can I change the encryption type method to be compatible with the KDC (i tried a XP client and it worked fine). Many thanks!

  Read the article

• Windows Vista and 7 crossrealm authentication MIT Kerberos

  - by fox8

  I'm using Windows Server 2008 and Windows Vista and 7 for cross realm authentication using MIT Kerberos 1.6 but when i try to login with a user the KDC answers: (wireshark output) error_code: KRB5KDC_ERR_ETYPE_NOSUPP (14) ... e-text: BAD_ENCRYPTION_TYPE I want to know how can I change the encryption type method to be compatible with the KDC (i tried a XP client and it worked fine). (posted this yesterday on superuser, but I guess this is more a serverfault question) Can anyone help me on this ? Many thanks!

  Read the article

• Active directory Kerberos OSX problems

  - by Temotodochi

  I'll try to keep this short, but informative. I'm currently unable to bind OSX lion (10.7.4) machines to our AD. OSX kerberos (heimdal) is unable to locate the KDC service. However i can bind linux & windows machines to the AD without any problems in the same network AD controls the domain DNS and all the relevant _kerberos._tcp.x.domain.com and _kpasswd SRV DNS records are there and resolve fine when tried from OSX machines. Defined ports are open for service and manually accessible from OSX. When i try kinit in the OSX, i can get the first auth through (wrong passwords fail instantly), but when supplied with correct password, kinit fails after some waiting with "unable to reach KDC". All machines run NTP and have correct time. During testing, network is not firewalled between the machines Linux and windows machines have no problems whatsoever I have tried with and without /etc/krb5.conf - OSX by default does not need it in the krb5.conf i used a working config from one of our linux machines. dsconfigad fails with simple "connection failed to the directory server" I'm a bit baffled with this. OSX is like the KDC is nowhere to be found and at the same time my test machines with windows 7 and some linux (centos 6 & debian 6) machines have no problems whatsoever. Same network, same configurations. I'm missing some vital piece of configuration somewhere, and i can't find out what it is.

  Read the article

• BAD DC transfering FSMO Roles to ADC

  - by Suleman

  I have a DC (FQDN:server.icmcpk.local) and an ADC (FQDN:file-server.icmcpk.local). Recently my DC is facing a bad sector problem so I changed the Operation Masters to file-server for all five roles. but when ever i turn off the OLD DC the file-server also stops wroking with AD and GPMC further i m also unable to join any other computer to this domain. For Test purpose i also added a new ADC (FQDN:wds-server.icmcpk.local) but no succes with the old DC off i had to turn the old DC on and then joined it. I m attaching the Dcdiags for all three servers. Kindly help me so that i b able to reinstall new HDD and it can go online again. --------------------------------------- Server --------------------------------------- C:\Program Files\Support Tools>dcdiag Domain Controller Diagnosis Performing initial setup: Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\SERVER Starting test: Connectivity ......................... SERVER passed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\SERVER Starting test: Replications [Replications Check,SERVER] A recent replication attempt failed: From FILE-SERVER to SERVER Naming Context: DC=ForestDnsZones,DC=icmcpk,DC=local The replication generated an error (1908): Could not find the domain controller for this domain. The failure occurred at 2012-05-04 14:07:13. The last success occurred at 2012-05-04 13:48:39. 1 failures have occurred since the last success. Kerberos Error. A KDC was not found to authenticate the call. Check that sufficient domain controllers are available. [Replications Check,SERVER] A recent replication attempt failed: From WDS-SERVER to SERVER Naming Context: DC=ForestDnsZones,DC=icmcpk,DC=local The replication generated an error (1908): Could not find the domain controller for this domain. The failure occurred at 2012-05-04 14:07:13. The last success occurred at 2012-05-04 13:48:39. 1 failures have occurred since the last success. Kerberos Error. A KDC was not found to authenticate the call. Check that sufficient domain controllers are available. [Replications Check,SERVER] A recent replication attempt failed: From FILE-SERVER to SERVER Naming Context: DC=DomainDnsZones,DC=icmcpk,DC=local The replication generated an error (1908): Could not find the domain controller for this domain. The failure occurred at 2012-05-04 14:07:13. The last success occurred at 2012-05-04 13:48:39. 1 failures have occurred since the last success. Kerberos Error. A KDC was not found to authenticate the call. Check that sufficient domain controllers are available. [Replications Check,SERVER] A recent replication attempt failed: From WDS-SERVER to SERVER Naming Context: DC=DomainDnsZones,DC=icmcpk,DC=local The replication generated an error (1908): Could not find the domain controller for this domain. The failure occurred at 2012-05-04 14:07:13. The last success occurred at 2012-05-04 13:48:39. 1 failures have occurred since the last success. Kerberos Error. A KDC was not found to authenticate the call. Check that sufficient domain controllers are available. [Replications Check,SERVER] A recent replication attempt failed: From FILE-SERVER to SERVER Naming Context: CN=Schema,CN=Configuration,DC=icmcpk,DC=local The replication generated an error (1908): Could not find the domain controller for this domain. The failure occurred at 2012-05-04 14:07:13. The last success occurred at 2012-05-04 13:48:39. 1 failures have occurred since the last success. Kerberos Error. A KDC was not found to authenticate the call. Check that sufficient domain controllers are available. [Replications Check,SERVER] A recent replication attempt failed: From WDS-SERVER to SERVER Naming Context: CN=Schema,CN=Configuration,DC=icmcpk,DC=local The replication generated an error (1908): Could not find the domain controller for this domain. The failure occurred at 2012-05-04 14:07:13. The last success occurred at 2012-05-04 13:48:39. 1 failures have occurred since the last success. Kerberos Error. A KDC was not found to authenticate the call. Check that sufficient domain controllers are available. [Replications Check,SERVER] A recent replication attempt failed: From WDS-SERVER to SERVER Naming Context: DC=icmcpk,DC=local The replication generated an error (1908): Could not find the domain controller for this domain. The failure occurred at 2012-05-04 14:07:13. The last success occurred at 2012-05-04 13:48:39. 1 failures have occurred since the last success. Kerberos Error. A KDC was not found to authenticate the call. Check that sufficient domain controllers are available. ......................... SERVER passed test Replications Starting test: NCSecDesc ......................... SERVER passed test NCSecDesc Starting test: NetLogons ......................... SERVER passed test NetLogons Starting test: Advertising ......................... SERVER passed test Advertising Starting test: KnowsOfRoleHolders ......................... SERVER passed test KnowsOfRoleHolders Starting test: RidManager ......................... SERVER passed test RidManager Starting test: MachineAccount ......................... SERVER passed test MachineAccount Starting test: Services ......................... SERVER passed test Services Starting test: ObjectsReplicated ......................... SERVER passed test ObjectsReplicated Starting test: frssysvol ......................... SERVER passed test frssysvol Starting test: frsevent There are warning or error events within the last 24 hours after the SYSVOL has been shared. Failing SYSVOL replication problems may cause Group Policy problems. ......................... SERVER failed test frsevent Starting test: kccevent ......................... SERVER passed test kccevent Starting test: systemlog An Error Event occured. EventID: 0x80001778 Time Generated: 05/04/2012 14:05:39 Event String: The previous system shutdown at 1:26:31 PM on An Error Event occured. EventID: 0x825A0011 Time Generated: 05/04/2012 14:07:45 (Event String could not be retrieved) An Error Event occured. EventID: 0x00000457 Time Generated: 05/04/2012 14:13:40 (Event String could not be retrieved) An Error Event occured. EventID: 0x00000457 Time Generated: 05/04/2012 14:14:25 (Event String could not be retrieved) An Error Event occured. EventID: 0x00000457 Time Generated: 05/04/2012 14:14:25 (Event String could not be retrieved) An Error Event occured. EventID: 0x00000457 Time Generated: 05/04/2012 14:14:38 (Event String could not be retrieved) An Error Event occured. EventID: 0xC1010020 Time Generated: 05/04/2012 14:16:14 Event String: Dependent Assembly Microsoft.VC80.MFCLOC could An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:16:14 Event String: Resolve Partial Assembly failed for An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:16:14 Event String: Generate Activation Context failed for An Error Event occured. EventID: 0xC1010020 Time Generated: 05/04/2012 14:16:14 Event String: Dependent Assembly Microsoft.VC80.MFCLOC could An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:16:14 Event String: Resolve Partial Assembly failed for An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:16:14 Event String: Generate Activation Context failed for An Error Event occured. EventID: 0x825A0011 Time Generated: 05/04/2012 14:22:57 (Event String could not be retrieved) An Error Event occured. EventID: 0xC1010020 Time Generated: 05/04/2012 14:22:59 Event String: Dependent Assembly Microsoft.VC80.MFCLOC could An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:22:59 Event String: Resolve Partial Assembly failed for An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:22:59 Event String: Generate Activation Context failed for An Error Event occured. EventID: 0xC1010020 Time Generated: 05/04/2012 14:22:59 Event String: Dependent Assembly Microsoft.VC80.MFCLOC could An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:22:59 Event String: Resolve Partial Assembly failed for An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:22:59 Event String: Generate Activation Context failed for ......................... SERVER failed test systemlog Starting test: VerifyReferences ......................... SERVER passed test VerifyReferences Running partition tests on : ForestDnsZones Starting test: CrossRefValidation ......................... ForestDnsZones passed test CrossRefValidation Starting test: CheckSDRefDom ......................... ForestDnsZones passed test CheckSDRefDom Running partition tests on : DomainDnsZones Starting test: CrossRefValidation ......................... DomainDnsZones passed test CrossRefValidation Starting test: CheckSDRefDom ......................... DomainDnsZones passed test CheckSDRefDom Running partition tests on : Schema Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Running partition tests on : Configuration Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Running partition tests on : icmcpk Starting test: CrossRefValidation ......................... icmcpk passed test CrossRefValidation Starting test: CheckSDRefDom ......................... icmcpk passed test CheckSDRefDom Running enterprise tests on : icmcpk.local Starting test: Intersite ......................... icmcpk.local passed test Intersite Starting test: FsmoCheck ......................... icmcpk.local passed test FsmoCheck ---------------------- File-Server ---------------------- C:\Users\Administrator.ICMCPK>dcdiag Directory Server Diagnosis Performing initial setup: Trying to find home server... Home Server = FILE-SERVER * Identified AD Forest. Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\FILE-SERVER Starting test: Connectivity ......................... FILE-SERVER passed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\FILE-SERVER Starting test: Advertising Warning: DsGetDcName returned information for \\Server.icmcpk.local, when we were trying to reach FILE-SERVER. SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE. ......................... FILE-SERVER failed test Advertising Starting test: FrsEvent ......................... FILE-SERVER passed test FrsEvent Starting test: DFSREvent ......................... FILE-SERVER passed test DFSREvent Starting test: SysVolCheck ......................... FILE-SERVER passed test SysVolCheck Starting test: KccEvent ......................... FILE-SERVER passed test KccEvent Starting test: KnowsOfRoleHolders ......................... FILE-SERVER passed test KnowsOfRoleHolders Starting test: MachineAccount ......................... FILE-SERVER passed test MachineAccount Starting test: NCSecDesc Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have Replicating Directory Changes In Filtered Set access rights for the naming context: DC=ForestDnsZones,DC=icmcpk,DC=local Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have Replicating Directory Changes In Filtered Set access rights for the naming context: DC=DomainDnsZones,DC=icmcpk,DC=local ......................... FILE-SERVER failed test NCSecDesc Starting test: NetLogons Unable to connect to the NETLOGON share! (\\FILE-SERVER\netlogon) [FILE-SERVER] An net use or LsaPolicy operation failed with error 67, The network name cannot be found.. ......................... FILE-SERVER failed test NetLogons Starting test: ObjectsReplicated ......................... FILE-SERVER passed test ObjectsReplicated Starting test: Replications ......................... FILE-SERVER passed test Replications Starting test: RidManager ......................... FILE-SERVER passed test RidManager Starting test: Services ......................... FILE-SERVER passed test Services Starting test: SystemLog An Error Event occurred. EventID: 0x00000469 Time Generated: 05/04/2012 14:01:10 Event String: The processing of Group Policy failed because of lack of network con nectivity to a domain controller. This may be a transient condition. A success m essage would be generated once the machine gets connected to the domain controll er and Group Policy has succesfully processed. If you do not see a success messa ge for several hours, then contact your administrator. An Warning Event occurred. EventID: 0x8000A001 Time Generated: 05/04/2012 14:07:11 Event String: The Security System could not establish a secured connection with th e server ldap/icmcpk.local/[email protected]. No authentication protocol was available. An Warning Event occurred. EventID: 0x00000BBC Time Generated: 05/04/2012 14:30:34 Event String: Windows Defender Real-Time Protection agent has detected changes. Mi crosoft recommends you analyze the software that made these changes for potentia l risks. You can use information about how these programs operate to choose whet her to allow them to run or remove them from your computer. Allow changes only if you trust the program or the software publisher. Windows Defender can't undo changes that you allow. An Warning Event occurred. EventID: 0x00000BBC Time Generated: 05/04/2012 14:30:36 Event String: Windows Defender Real-Time Protection agent has detected changes. Mi crosoft recommends you analyze the software that made these changes for potentia l risks. You can use information about how these programs operate to choose whet her to allow them to run or remove them from your computer. Allow changes only if you trust the program or the software publisher. Windows Defender can't undo changes that you allow. ......................... FILE-SERVER failed test SystemLog Starting test: VerifyReferences ......................... FILE-SERVER passed test VerifyReferences Running partition tests on : ForestDnsZones Starting test: CheckSDRefDom ......................... ForestDnsZones passed test CheckSDRefDom Starting test: CrossRefValidation ......................... ForestDnsZones passed test CrossRefValidation Running partition tests on : DomainDnsZones Starting test: CheckSDRefDom ......................... DomainDnsZones passed test CheckSDRefDom Starting test: CrossRefValidation ......................... DomainDnsZones passed test CrossRefValidation Running partition tests on : Schema Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Running partition tests on : Configuration Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Running partition tests on : icmcpk Starting test: CheckSDRefDom ......................... icmcpk passed test CheckSDRefDom Starting test: CrossRefValidation ......................... icmcpk passed test CrossRefValidation Running enterprise tests on : icmcpk.local Starting test: LocatorCheck ......................... icmcpk.local passed test LocatorCheck Starting test: Intersite ......................... icmcpk.local passed test Intersite --------------------- WDS-Server --------------------- C:\Users\Administrator.ICMCPK>dcdiag Directory Server Diagnosis Performing initial setup: Trying to find home server... Home Server = WDS-SERVER * Identified AD Forest. Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\WDS-SERVER Starting test: Connectivity ......................... WDS-SERVER passed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\WDS-SERVER Starting test: Advertising Warning: DsGetDcName returned information for \\Server.icmcpk.local, when we were trying to reach WDS-SERVER. SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE. ......................... WDS-SERVER failed test Advertising Starting test: FrsEvent There are warning or error events within the last 24 hours after the SYSVOL has been shared. Failing SYSVOL replication problems may cause Group Policy problems. ......................... WDS-SERVER passed test FrsEvent Starting test: DFSREvent ......................... WDS-SERVER passed test DFSREvent Starting test: SysVolCheck ......................... WDS-SERVER passed test SysVolCheck Starting test: KccEvent ......................... WDS-SERVER passed test KccEvent Starting test: KnowsOfRoleHolders ......................... WDS-SERVER passed test KnowsOfRoleHolders Starting test: MachineAccount ......................... WDS-SERVER passed test MachineAccount Starting test: NCSecDesc Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have Replicating Directory Changes In Filtered Set access rights for the naming context: DC=ForestDnsZones,DC=icmcpk,DC=local Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have Replicating Directory Changes In Filtered Set access rights for the naming context: DC=DomainDnsZones,DC=icmcpk,DC=local ......................... WDS-SERVER failed test NCSecDesc Starting test: NetLogons Unable to connect to the NETLOGON share! (\\WDS-SERVER\netlogon) [WDS-SERVER] An net use or LsaPolicy operation failed with error 67, The network name cannot be found.. ......................... WDS-SERVER failed test NetLogons Starting test: ObjectsReplicated ......................... WDS-SERVER passed test ObjectsReplicated Starting test: Replications ......................... WDS-SERVER passed test Replications Starting test: RidManager ......................... WDS-SERVER passed test RidManager Starting test: Services ......................... WDS-SERVER passed test Services Starting test: SystemLog An Error Event occurred. EventID: 0x0000041E Time Generated: 05/04/2012 14:02:55 Event String: The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name Sysytem (DNS) is configured and working correctly. An Error Event occurred. EventID: 0x0000041E Time Generated: 05/04/2012 14:08:33 Event String: The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name Sysytem (DNS) is configured and working correctly. ......................... WDS-SERVER failed test SystemLog Starting test: VerifyReferences ......................... WDS-SERVER passed test VerifyReferences Running partition tests on : ForestDnsZones Starting test: CheckSDRefDom ......................... ForestDnsZones passed test CheckSDRefDom Starting test: CrossRefValidation ......................... ForestDnsZones passed test CrossRefValidation Running partition tests on : DomainDnsZones Starting test: CheckSDRefDom ......................... DomainDnsZones passed test CheckSDRefDom Starting test: CrossRefValidation ......................... DomainDnsZones passed test CrossRefValidation Running partition tests on : Schema Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Running partition tests on : Configuration Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Running partition tests on : icmcpk Starting test: CheckSDRefDom ......................... icmcpk passed test CheckSDRefDom Starting test: CrossRefValidation ......................... icmcpk passed test CrossRefValidation Running enterprise tests on : icmcpk.local Starting test: LocatorCheck ......................... icmcpk.local passed test LocatorCheck Starting test: Intersite ......................... icmcpk.local passed test Intersite

  Read the article

• Openldap/Sasl/GSSAPI on Debian: Key table entry not found

  - by badbishop

  The goal: to make an OpenLDAP server to authenticate using Kerberos V via GSSAPI Setup: several virtual machines running on freshly installed/updated Debian Squeeze A master KDC server kdc.example.com A LDAP server, running OpenLDAP ldap.example.com The problem: tom@ldap:~$ ldapsearch -b 'dc=example,dc=com' SASL/GSSAPI authentication started ldap_sasl_interactive_bind_s: Other (e.g., implementation specific) error (80) additional info: SASL(-1): generic failure: GSSAPI Error: Unspecified GSS failure. Minor code may provide more information (Key table entry not found) One might suggest to add that bloody keytab entry, but here's the real problem: ktutil: rkt /etc/ldap/ldap.keytab ktutil: list slot KVNO Principal ---- ---- --------------------------------------------------------------------- 1 2 ldap/[email protected] 2 2 ldap/[email protected] 3 2 ldap/[email protected] 4 2 ldap/[email protected] So, the entry as suggested by the OpenLDAP manual is there allright. Deleting and re-creating both service principal and the keytab on ldap.example.com didn't help, I get the same error. And before I make the keytab file readable by openldap, I get "Permission denied" error instead of the one in the subject. Which implies, that the right keytab file is being accessed, as set in /etc/default/slapd. I have my doubts about the following part of slapd config: root@ldap:~# cat /etc/ldap/slapd.d/cn\=config.ldif | grep -v "^#" dn: cn=config objectClass: olcGlobal cn: config olcArgsFile: /var/run/slapd/slapd.args olcLogLevel: 256 olcPidFile: /var/run/slapd/slapd.pid olcToolThreads: 1 structuralObjectClass: olcGlobal entryUUID: d6737f5c-d321-1030-9dbe-27d2a7751e11 olcSaslHost: kdc.example.com olcSaslRealm: EXAMPLE.COM olcSaslSecProps: noplain,noactive,noanonymous,minssf=56 olcAuthzRegexp: {0}"uid=([^/]*),cn=EXAMPLE.COM,cn=GSSAPI,cn=auth" "uid=$1,ou=People,dc=example,dc=com" olcAuthzRegexp: {1}"uid=host/([^/]*).example.com,cn=example.com,cn=gssapi,cn=auth" "cn=$1,ou=hosts,dc=example,dc=com" A HOWTO at https://help.ubuntu.com/community/OpenLDAPServer#Kerberos_Authentication mentiones vaguely: Also, it is frequently necessary to map the Distinguished Name (DN) of an authorized Kerberos client to an existing entry in the DIT. I fail to understand where in the tree this should be defined, what schema should be used, etc. After hours of googling, it's official: I'm stuck! Please, help. Other things checked: Kerberos as such works fine (I can ssh without using a password to any machine in this setup). That means there should be no DNS-related problems. ldapsearch -b 'dc=example,dc=com' -x works OK. SASL/GSSAPI has been tested using sasl-sample-server -m GSSAPI -s ldap and sasl-sample-client -s ldap -n ldap.example.com -u tom without errors: root@ldap:~# sasl-sample-server -m GSSAPI -s ldap Forcing use of mechanism GSSAPI Sending list of 1 mechanism(s) S: R1NTQVBJ Waiting for client mechanism... C: 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 'GSSAPI' Sending response... S: YIGZBgkqhkiG9xIBAgICAG+BiTCBhqADAgEFoQMCAQ+iejB4oAMCARKicQRvkxggi9pW+yJ1ExbTwLDclqw/VQ98aPq8mt39hkO6PPfcO2cB+t6vJ01xRKBrT9D2qF2XK0SWD4PQNb5UFbH4RM/bKAxDuCfZ1MHKgIWTLu4bK7VGZTbYydcckU2d910jIdvkkHhaRqUEM4cqp/cR Waiting for client reply... C: got '' Sending response... S: BQQF/wAMAAAAAAAAMBOWqQcACAAlCodrXW66ZObsEd4= Waiting for client reply... C: BQQE/wAMAAAAAAAAFUYbXQQACAB0b20VynB4uGH/iIzoRhw=got '?' Negotiation complete Username: tom Realm: (NULL) SSF: 56 sending encrypted message 'srv message 1' S: AAAASgUEB/8AAAAAAAAAADATlqrqrBW0NRfPMXMdMz+zqY32YakrHqFps3o/vO6yDeyPSaSqprrhI+t7owk7iOsbrZ/idJRxCBm8Wazx Waiting for encrypted message... C: AAAATQUEBv8AAAAAAAAAABVGG17WC1+/kIV9xTMUdq6Y4qYmmTahHVCjidgGchTOOOrBLEwA9IqiTCdRFPVbK1EgJ34P/vxMQpV1v4WZpcztgot '' recieved decoded message 'client message 1' root@ldap:~# sasl-sample-client -s ldap -n ldap.example.com -u tom service=ldap Waiting for mechanism list from server... S: R1NTQVBJrecieved 6 byte message Choosing best mechanism from: GSSAPI returning OK: tom Using mechanism GSSAPI Preparing initial. Sending initial response... C: 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 Waiting for server reply... S: YIGZBgkqhkiG9xIBAgICAG+BiTCBhqADAgEFoQMCAQ+iejB4oAMCARKicQRvkxggi9pW+yJ1ExbTwLDclqw/VQ98aPq8mt39hkO6PPfcO2cB+t6vJ01xRKBrT9D2qF2XK0SWD4PQNb5UFbH4RM/bKAxDuCfZ1MHKgIWTLu4bK7VGZTbYydcckU2d910jIdvkkHhaRqUEM4cqp/cRrecieved 156 byte message C: Waiting for server reply... S: BQQF/wAMAAAAAAAAMBOWqQcACAAlCodrXW66ZObsEd4=recieved 32 byte message Sending response... C: BQQE/wAMAAAAAAAAFUYbXQQACAB0b20VynB4uGH/iIzoRhw= Negotiation complete Username: tom SSF: 56 Waiting for encoded message... S: AAAASgUEB/8AAAAAAAAAADATlqrqrBW0NRfPMXMdMz+zqY32YakrHqFps3o/vO6yDeyPSaSqprrhI+t7owk7iOsbrZ/idJRxCBm8Wazxrecieved 78 byte message recieved decoded message 'srv message 1' sending encrypted message 'client message 1' C: AAAATQUEBv8AAAAAAAAAABVGG17WC1+/kIV9xTMUdq6Y4qYmmTahHVCjidgGchTOOOrBLEwA9IqiTCdRFPVbK1EgJ34P/vxMQpV1v4WZpczt

  Read the article

• error reading keytab file krb5.keytab

  - by Banjer

  I've noticed these kerberos keytab error messages on both SLES 11.2 and CentOS 6.3: sshd[31442]: pam_krb5[31442]: error reading keytab 'FILE: / etc/ krb5. keytab' /etc/krb5.keytab does not exist on our hosts, and from what I understand of the keytab file, we don't need it. Per this kerberos keytab introduction: A keytab is a file containing pairs of Kerberos principals and encrypted keys (these are derived from the Kerberos password). You can use this file to log into Kerberos without being prompted for a password. The most common personal use of keytab files is to allow scripts to authenticate to Kerberos without human interaction, or store a password in a plaintext file. This sounds like something we do not need and is perhaps better security-wise to not have it. How can I keep this error from popping up in our system logs? Here is my krb5.conf if its useful: banjer@myhost:~> cat /etc/krb5.conf # This file managed by Puppet # [libdefaults] default_tkt_enctypes = RC4-HMAC DES-CBC-MD5 DES-CBC-CRC default_tgs_enctypes = RC4-HMAC DES-CBC-MD5 DES-CBC-CRC preferred_enctypes = RC4-HMAC DES-CBC-MD5 DES-CBC-CRC default_realm = FOO.EXAMPLE.COM dns_lookup_kdc = true clockskew = 300 [logging] default = SYSLOG:NOTICE:DAEMON kdc = FILE:/var/log/kdc.log kadmind = FILE:/var/log/kadmind.log [appdefaults] pam = { ticket_lifetime = 1d renew_lifetime = 1d forwardable = true proxiable = false retain_after_close = false minimum_uid = 0 debug = false banner = "Enter your current" } Let me know if you need to see any other configs. Thanks. EDIT This message shows up in /var/log/secure whenever a non-root user logs in via SSH or the console. It seems to only occur with password-based authentication. If I do a key-based ssh to a server, I don't see the error. If I log in with root, I do not see the error. Our Linux servers authenticate against Active Directory, so its a hearty mix of PAM, samba, kerberos, and winbind that is used to authenticate a user.

  Read the article

• RPCSS kerberos issues on imaged Windows workstations

  - by sysadmin1138

  While doing some unrelated troubleshooting I came across a set of Event Log entries that have me concerned. Machine Name: labcomputer82 Source: Security-Kerberos Event ID: 4 Event Description: The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server labcomputer143$. The target name used was RPCSS/imagemaster4.ad.domain.edu. This indicates that the target server failed to decrypt the ticket provided by the client. This can occur when the target server principal name (SPN) is registered on an account other than the account the target service is using. Please ensure that the target SPN is registered on, and only registered on, the account used by the server. This error can also happen when the target service is using a different password for the target service account than what the Kerberos Key Distribution Center (KDC) has for the target service account. Please ensure that the service on the server and the KDC are both updated to use the current password. If the server name is not fully qualified, and the target domain (AD.DOMAIN.EDU) is different from the client domain (AD.DOMAIN.EDU), check if there are identically named server accounts in these two domains, or use the fully-qualified name to identify the server. There are three machine names used in this message. It's generated on labcomputer82, it's attempting to talk to another lab workstation called labcomputer143, and the service in question (RPCSS) refers to the name of the machine that this machine was imaged from (and possibly also that of labcomputer143, I'm not sure). The thing that has me raising both eyebrows is that the machine named labcomputer82 is attempting to use an SPN of RPCSS/imagemaster4.ad.domain.edu. The SPN attribute on the computer object in AD looks just fine. It has all the names it should have. Of the over 3,000 computer objects in our AD domain, somewhere around 1,700 of the are computer-lab seats that are frequently imaged. If we're doing something wrong, I'd like to know in time to get our procedures modified (and people retrained) for fall quarter. But if this is normal for imaged machines, I'll just continue ignoring these.

  Read the article

• Kerberos authentication not working for one single domain

  - by Buddy Casino

  We have a strange problem regarding Kerberos authentication with Apache mod_auth_kerb. We use a very simple krb5.conf, where only a single (main) AD server is configured. There are many domains in the forest, and it seems that SSO is working for most of them, except one. I don't know what is special about that domain, the error message that I see in the Apache logs is "Server not found in Kerberos database": [Wed Aug 31 14:56:02 2011] [debug] src/mod_auth_kerb.c(1025): [client xx.xxx.xxx.xxx] Using HTTP/[email protected] as server principal for password verification [Wed Aug 31 14:56:02 2011] [debug] src/mod_auth_kerb.c(714): [client xx.xxx.xxx.xxx] Trying to get TGT for user [email protected] [Wed Aug 31 14:56:02 2011] [debug] src/mod_auth_kerb.c(625): [client xx.xxx.xxx.xxx] Trying to verify authenticity of KDC using principal HTTP/[email protected] [Wed Aug 31 14:56:02 2011] [debug] src/mod_auth_kerb.c(640): [client xx.xxx.xxx.xxx] krb5_get_credentials() failed when verifying KDC [Wed Aug 31 14:56:02 2011] [error] [client xx.xxx.xxx.xxx] failed to verify krb5 credentials: Server not found in Kerberos database [Wed Aug 31 14:56:02 2011] [debug] src/mod_auth_kerb.c(1110): [client xx.xxx.xxx.xxx] kerb_authenticate_user_krb5pwd ret=401 user=(NULL) authtype=(NULL) When I try to kinit that user on the machine on which Apache is running, it works. I also checked that DNS lookups work, including reverse lookup. Who can tell me whats going?

  Read the article

• Single Sign On for intranet with Apache and Linux MIT Kerberos

  - by Beerdude26

  Greetings, I am looking for a way to do a single sign on to an intranet in the following manner: A Linux user logs on via a graphical frontend (for example, GNOME). He automatically requests a TGT for his username from the MIT Kerberos KDC. Via some way or another, the Apache server (which we'll assume is on the same server as the KDC), is informed that this user has logged in. When the user accesses the intranet, he is automatically granted access to his web applications. I don't think I've seen this kind of functionality while searching the net. I know the following possibilities exist: Using an authentication module such as mod_auth_kerb, a user is presented with a login prompt to enter his username and password, which are then authenticated against the MIT Kerberos server. (I would like this to be automatic.) IIS supports integrated Windows logon via ASP.Net when the user is part of an Active Directory. (I'm looking for the Linux / Apache equivalent.) Any suggestions, criticism and ideas are highly appreciated. This is for a school project to show a proof-of-concept, so every handy piece of information is more than welcome. :)

  Read the article

• [SOLVED] Single Sign On for intranet with Apache and Linux MIT Kerberos

  - by Beerdude26

  EDIT: SOLVED! See my answer below. Greetings, I am looking for a way to do a single sign on to an intranet in the following manner: A Linux user logs on via a graphical frontend (for example, GNOME). He automatically requests a TGT for his username from the MIT Kerberos KDC. Via some way or another, the Apache server (which we'll assume is on the same server as the KDC), is informed that this user has logged in. When the user accesses the intranet, he is automatically granted access to his web applications. I don't think I've seen this kind of functionality while searching the net. I know the following possibilities exist: Using an authentication module such as mod_auth_kerb, a user is presented with a login prompt to enter his username and password, which are then authenticated against the MIT Kerberos server. (I would like this to be automatic.) IIS supports integrated Windows logon via ASP.Net when the user is part of an Active Directory. (I'm looking for the Linux / Apache equivalent.) Any suggestions, criticism and ideas are highly appreciated. This is for a school project to show a proof-of-concept, so every handy piece of information is more than welcome. :)

  Read the article

• Configured Samba to join our domain, but logon fails from Windows machine

  - by jasonh

  I've configured a Fedora 11 installation to join our domain. It seems to join successfully (though it reports a DNS update failure) but when I try to access \\fedoraserver.test.mycompany.com I'm prompted for a password. So I enter adminuser and the password and that fails, so I try test.mycompany.com\adminuser and that too fails. What am I missing? EDIT (Update 9/1/09): I can now connect to the machine and see the shares on it (see my response to djhowell's answer) but when I try to connect, I get an error saying The network path was not found. I checked the log entry on the Fedora computer for the computer I'm connecting from (/var/log/samba/log.ComputerX) and it reads: [2009/09/01 12:02:46, 1] libads/cldap.c:recv_cldap_netlogon(157) no reply received to cldap netlogon [2009/09/01 12:02:46, 1] libads/ldap.c:ads_find_dc(417) ads_find_dc: failed to find a valid DC on our site (Default-First-Site-Name), trying to find another DC Config files as of 9/1/09: smb.conf: [global] Workgroup = TEST realm = TEST.MYCOMPANY.COM password server = DC.TEST.MYCOMPANY.COM security = DOMAIN server string = Test Samba Server log file = /var/log/samba/log.%m max log size = 50 idmap uid = 15000-20000 idmap gid = 15000-20000 windbind use default domain = yes cups options = raw client use spnego = no server signing = auto client signing = auto [share] comment = Test Share path = /mnt/storage1 valid users = adminuser admin users = adminuser read list = adminuser write list = adminuser read only = No I also set the krb5.conf file to look like this: [logging] default = FILE:/var/log/krb5libs.log kdc = FILE:/var/log/krb5kdc.log admin_server = FILE:/var/log/kadmind.log [libdefaults] default_realm = test.mycompany.com dns_lookup_realm = false dns_lookup_kdc = false ticket_lifetime = 24h forwardable = yes [realms] TEST.MYCOMPANY.COM = { kdc = dc.test.mycompany.com admin_server = dc.test.mycompany.com default_domain = test.mycompany.com } [domain_realm] dc.test.mycompany.com = test.mycompany.com .dc.test.mycompany.com = test.mycompany.com [appdefaults] pam = { debug = false ticket_lifetime = 36000 renew_lifetime = 36000 forwardable = true krb4_convert = false } I realize that there might be an issue with EXAMPLE.COM in there, however if I change it to TEST.MYCOMPANY.COM then it fails to join the domain with a preauthentication failure. As of 9/1/09, this is no longer the case.

  Read the article

• winbind failing after a semi-random amount of time

  - by The Digital Ninja

  I have winbind set up to authenticate to our AD for samba shares. This is the third such server, and the only one having any issues. It seems after a random amount of time samba shares will just stop working. Winbind processes seem to be running but restarting them seems to fix the issue for a while. Looking at the logs have been kind of hit an miss and I don't know exactly when it fails. One interesting thing is that it seems to be pulling from another domain controller that it shoudlnt. I censored out the domain name in this example. But isnt there some way to block authentication to a domain? I'm not sure if this is a symptom or a cause of the issue. [2010/10/18 08:02:10, 0] winbindd/winbindd_cache.c:initialize_winbindd_cache(2577) initialize_winbindd_cache: clearing cache and re-creating with version number 1 [2010/10/18 09:15:54, 1] libsmb/clikrb5.c:ads_krb5_mk_req(686) ads_krb5_mk_req: krb5_get_credentials failed for [email protected] (Cannot find KDC for requested realm) [2010/10/18 09:15:54, 1] libsmb/cliconnect.c:cli_session_setup_kerberos(624) cli_session_setup_kerberos: spnego_gen_negTokenTarg failed: Cannot find KDC for requested realm [2010/10/18 09:15:54, 0] lib/util_sock.c:write_data(1139) write_data: write failure. Error = Connection reset by peer [2010/10/18 09:15:54, 0] libsmb/clientgen.c:write_socket(242) write_socket: Error writing 108 bytes to socket 18: ERRNO = Connection reset by peer [2010/10/18 09:15:54, 0] libsmb/clientgen.c:cli_send_smb(290) Error writing 108 bytes to client. -1 (Connection reset by peer)

  Read the article

• SSH works in putty but not terminal

  - by Ryan Naddy

  When I try to ssh this in a terminal: ssh [email protected] I get the following error: Connection closed by 69.163.227.82 When I use putty, I am able to connect to the server. Why is this happening, and how can I get this to work in a terminal? ssh -v [email protected] OpenSSH_6.0p1 (CentrifyDC build 5.1.0-472) (CentrifyDC build 5.1.0-472), OpenSSL 0.9.8w 23 Apr 2012 debug1: Reading configuration data /etc/centrifydc/ssh/ssh_config debug1: /etc/centrifydc/ssh/ssh_config line 52: Applying options for * debug1: Connecting to sub.domain.com [69.163.227.82] port 22. debug1: Connection established. debug1: identity file /home/ryannaddy/.ssh/id_rsa type -1 debug1: identity file /home/ryannaddy/.ssh/id_rsa-cert type -1 debug1: identity file /home/ryannaddy/.ssh/id_dsa type -1 debug1: identity file /home/ryannaddy/.ssh/id_dsa-cert type -1 debug1: identity file /home/ryannaddy/.ssh/id_ecdsa type -1 debug1: identity file /home/ryannaddy/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.1p1 Debian-5 debug1: match: OpenSSH_5.1p1 Debian-5 pat OpenSSH_5* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_6.0 debug1: Miscellaneous failure Cannot resolve network address for KDC in requested realm debug1: Miscellaneous failure Cannot resolve network address for KDC in requested realm debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP Connection closed by 69.163.227.82

  Read the article

• Multi- authentication scenario for a public internet service using Kerberos

  - by StrangeLoop

  I have a public web server which has users coming from internet (via HTTPS) and from a corporate intranet. I wish to use Kerberos authentication for the intranet users so that they would be automatically logged in the web application without the need to provide any login/password (assuming they are already logged to the Windows domain). For the users coming from internet I want to provide traditional basic/form- based authentication. User/password data for these users would be stored internally in a database used by the application. Web application will be configured to use Kerberos authentication for users coming from specific intranet ip networks and basic/form- based authentication will be used for the rest of the users. From a security perspective, are there some risks involved in this kind of setup or is this a generally accepted solution? My understanding is that server doesn't need access to KDC (see Kerberos authentication, service host and access to KDC) and it can be completely isolated from AD and corporate intranet. The server has a keytab file stored locally that is used to decrypt tickets sent by the users coming from intranet. The tickets only contain username and domain of the incoming user. Server never sees the passwords of authenticated users. If the server would be hacked and the keytab file compromised, it would mean that attacker could forge tickets for any domain user and get access to the web application as any user. But typically this is the case anyway if hacker gains access to the keytab file on the local filesystem. The encryption key contained in the keytab file is based on the service account password in AD and is in hashed form, I guess it is very difficult to brute force this password if strong Kerberos encryption like AES-256-SHA1 is used. As the server has no network access to intranet, even the compromised service account couldn't be directly used for anything.

  Read the article

• New Big Data Appliance Security Features

  - by mgubar

  The Oracle Big Data Appliance (BDA) is an engineered system for big data processing.  It greatly simplifies the deployment of an optimized Hadoop Cluster – whether that cluster is used for batch or real-time processing.  The vast majority of BDA customers are integrating the appliance with their Oracle Databases and they have certain expectations – especially around security.  Oracle Database customers have benefited from a rich set of security features:  encryption, redaction, data masking, database firewall, label based access control – and much, much more.  They want similar capabilities with their Hadoop cluster.    Unfortunately, Hadoop wasn’t developed with security in mind.  By default, a Hadoop cluster is insecure – the antithesis of an Oracle Database.  Some critical security features have been implemented – but even those capabilities are arduous to setup and configure.  Oracle believes that a key element of an optimized appliance is that its data should be secure.  Therefore, by default the BDA delivers the “AAA of security”: authentication, authorization and auditing. Security Starts at Authentication A successful security strategy is predicated on strong authentication – for both users and software services.  Consider the default configuration for a newly installed Oracle Database; it’s been a long time since you had a legitimate chance at accessing the database using the credentials “system/manager” or “scott/tiger”.  The default Oracle Database policy is to lock accounts thereby restricting access; administrators must consciously grant access to users. Default Authentication in Hadoop By default, a Hadoop cluster fails the authentication test. For example, it is easy for a malicious user to masquerade as any other user on the system.  Consider the following scenario that illustrates how a user can access any data on a Hadoop cluster by masquerading as a more privileged user.  In our scenario, the Hadoop cluster contains sensitive salary information in the file /user/hrdata/salaries.txt.  When logged in as the hr user, you can see the following files.  Notice, we’re using the Hadoop command line utilities for accessing the data: $ hadoop fs -ls /user/hrdataFound 1 items-rw-r--r--   1 oracle supergroup         70 2013-10-31 10:38 /user/hrdata/salaries.txt$ hadoop fs -cat /user/hrdata/salaries.txtTom Brady,11000000Tom Hanks,5000000Bob Smith,250000Oprah,300000000 User DrEvil has access to the cluster – and can see that there is an interesting folder called “hrdata”.  $ hadoop fs -ls /user Found 1 items drwx------   - hr supergroup          0 2013-10-31 10:38 /user/hrdata However, DrEvil cannot view the contents of the folder due to lack of access privileges: $ hadoop fs -ls /user/hrdata ls: Permission denied: user=drevil, access=READ_EXECUTE, inode="/user/hrdata":oracle:supergroup:drwx------ Accessing this data will not be a problem for DrEvil. He knows that the hr user owns the data by looking at the folder’s ACLs. To overcome this challenge, he will simply masquerade as the hr user. On his local machine, he adds the hr user, assigns that user a password, and then accesses the data on the Hadoop cluster: $ sudo useradd hr $ sudo passwd $ su hr $ hadoop fs -cat /user/hrdata/salaries.txt Tom Brady,11000000 Tom Hanks,5000000 Bob Smith,250000 Oprah,300000000 Hadoop has not authenticated the user; it trusts that the identity that has been presented is indeed the hr user. Therefore, sensitive data has been easily compromised. Clearly, the default security policy is inappropriate and dangerous to many organizations storing critical data in HDFS. Big Data Appliance Provides Secure Authentication The BDA provides secure authentication to the Hadoop cluster by default – preventing the type of masquerading described above. It accomplishes this thru Kerberos integration. Figure 1: Kerberos Integration The Key Distribution Center (KDC) is a server that has two components: an authentication server and a ticket granting service. The authentication server validates the identity of the user and service. Once authenticated, a client must request a ticket from the ticket granting service – allowing it to access the BDA’s NameNode, JobTracker, etc. At installation, you simply point the BDA to an external KDC or automatically install a highly available KDC on the BDA itself. Kerberos will then provide strong authentication for not just the end user – but also for important Hadoop services running on the appliance. You can now guarantee that users are who they claim to be – and rogue services (like fake data nodes) are not added to the system. It is common for organizations to want to leverage existing LDAP servers for common user and group management. Kerberos integrates with LDAP servers – allowing the principals and encryption keys to be stored in the common repository. This simplifies the deployment and administration of the secure environment. Authorize Access to Sensitive Data Kerberos-based authentication ensures secure access to the system and the establishment of a trusted identity – a prerequisite for any authorization scheme. Once this identity is established, you need to authorize access to the data. HDFS will authorize access to files using ACLs with the authorization specification applied using classic Linux-style commands like chmod and chown (e.g. hadoop fs -chown oracle:oracle /user/hrdata changes the ownership of the /user/hrdata folder to oracle). Authorization is applied at the user or group level – utilizing group membership found in the Linux environment (i.e. /etc/group) or in the LDAP server. For SQL-based data stores – like Hive and Impala – finer grained access control is required. Access to databases, tables, columns, etc. must be controlled. And, you want to leverage roles to facilitate administration. Apache Sentry is a new project that delivers fine grained access control; both Cloudera and Oracle are the project’s founding members. Sentry satisfies the following three authorization requirements: Secure Authorization:  the ability to control access to data and/or privileges on data for authenticated users. Fine-Grained Authorization:  the ability to give users access to a subset of the data (e.g. column) in a database Role-Based Authorization:  the ability to create/apply template-based privileges based on functional roles. With Sentry, “all”, “select” or “insert” privileges are granted to an object. The descendants of that object automatically inherit that privilege. A collection of privileges across many objects may be aggregated into a role – and users/groups are then assigned that role. This leads to simplified administration of security across the system. Figure 2: Object Hierarchy – granting a privilege on the database object will be inherited by its tables and views. Sentry is currently used by both Hive and Impala – but it is a framework that other data sources can leverage when offering fine-grained authorization. For example, one can expect Sentry to deliver authorization capabilities to Cloudera Search in the near future. Audit Hadoop Cluster Activity Auditing is a critical component to a secure system and is oftentimes required for SOX, PCI and other regulations. The BDA integrates with Oracle Audit Vault and Database Firewall – tracking different types of activity taking place on the cluster: Figure 3: Monitored Hadoop services. At the lowest level, every operation that accesses data in HDFS is captured. The HDFS audit log identifies the user who accessed the file, the time that file was accessed, the type of access (read, write, delete, list, etc.) and whether or not that file access was successful. The other auditing features include: MapReduce:  correlate the MapReduce job that accessed the file Oozie:  describes who ran what as part of a workflow Hive:  captures changes were made to the Hive metadata The audit data is captured in the Audit Vault Server – which integrates audit activity from a variety of sources, adding databases (Oracle, DB2, SQL Server) and operating systems to activity from the BDA. Figure 4: Consolidated audit data across the enterprise.  Once the data is in the Audit Vault server, you can leverage a rich set of prebuilt and custom reports to monitor all the activity in the enterprise. In addition, alerts may be defined to trigger violations of audit policies. Conclusion Security cannot be considered an afterthought in big data deployments. Across most organizations, Hadoop is managing sensitive data that must be protected; it is not simply crunching publicly available information used for search applications. The BDA provides a strong security foundation – ensuring users are only allowed to view authorized data and that data access is audited in a consolidated framework.

  Read the article

• SSSD Authentication

  - by user24089

  I just built a test server running OpenSuSE 12.1 and am trying to learn how configure sssd, but am not sure where to begin to look for why my config cannot allow me to authenticate. server:/etc/sssd # cat sssd.conf [sssd] config_file_version = 2 reconnection_retries = 3 sbus_timeout = 30 services = nss,pam domains = test.local [nss] filter_groups = root filter_users = root reconnection_retries = 3 [pam] reconnection_retries = 3 # Section created by YaST [domain/mose.cc] access_provider = ldap ldap_uri = ldap://server.test.local ldap_search_base = dc=test,dc=local ldap_schema = rfc2307bis id_provider = ldap ldap_user_uuid = entryuuid ldap_group_uuid = entryuuid ldap_id_use_start_tls = True enumerate = False cache_credentials = True chpass_provider = krb5 auth_provider = krb5 krb5_realm = TEST.LOCAL krb5_kdcip = server.test.local server:/etc # cat ldap.conf base dc=test,dc=local bind_policy soft pam_lookup_policy yes pam_password exop nss_initgroups_ignoreusers root,ldap nss_schema rfc2307bis nss_map_attribute uniqueMember member ssl start_tls uri ldap://server.test.local ldap_version 3 pam_filter objectClass=posixAccount server:/etc # cat nsswitch.conf passwd: compat sss group: files sss hosts: files dns networks: files dns services: files protocols: files rpc: files ethers: files netmasks: files netgroup: files publickey: files bootparams: files automount: files ldap aliases: files shadow: compat server:/etc # cat krb5.conf [libdefaults] default_realm = TEST.LOCAL clockskew = 300 [realms] TEST.LOCAL = { kdc = server.test.local admin_server = server.test.local database_module = ldap default_domain = test.local } [logging] kdc = FILE:/var/log/krb5/krb5kdc.log admin_server = FILE:/var/log/krb5/kadmind.log default = SYSLOG:NOTICE:DAEMON [dbmodules] ldap = { db_library = kldap ldap_kerberos_container_dn = cn=krbContainer,dc=test,dc=local ldap_kdc_dn = cn=Administrator,dc=test,dc=local ldap_kadmind_dn = cn=Administrator,dc=test,dc=local ldap_service_password_file = /etc/openldap/ldap-pw ldap_servers = ldaps://server.test.local } [domain_realm] .test.local = TEST.LOCAL [appdefaults] pam = { ticket_lifetime = 1d renew_lifetime = 1d forwardable = true proxiable = false minimum_uid = 1 clockskew = 300 external = sshd use_shmem = sshd } If I log onto the server as root I can su into an ldap user, however if I try to console locally or ssh remotely I am unable to authenticate. getent doesn't show the ldap entries for users, Im not sure if I need to look at LDAP, nsswitch, or what: server:~ # ssh localhost -l test Password: Password: Password: Permission denied (publickey,keyboard-interactive). server:~ # su test test@server:/etc> id uid=1000(test) gid=100(users) groups=100(users) server:~ # tail /var/log/messages Nov 24 09:36:44 server login[14508]: pam_sss(login:auth): system info: [Client not found in Kerberos database] Nov 24 09:36:44 server login[14508]: pam_sss(login:auth): authentication failure; logname=LOGIN uid=0 euid=0 tty=/dev/ttyS1 ruser= rhost= user=test Nov 24 09:36:44 server login[14508]: pam_sss(login:auth): received for user test: 4 (System error) Nov 24 09:36:44 server login[14508]: FAILED LOGIN SESSION FROM /dev/ttyS1 FOR test, System error server:~ # vi /etc/pam.d/common-auth auth required pam_env.so auth sufficient pam_unix2.so auth required pam_sss.so use_first_pass server:~ # vi /etc/pam.d/sshd auth requisite pam_nologin.so auth include common-auth account requisite pam_nologin.so account include common-account password include common-password session required pam_loginuid.so session include common-session session optional pam_lastlog.so silent noupdate showfailed

  Read the article

1 2 3  | Next Page >