Search Results

Search found 64 results on 3 pages for 'lloyd sparkes'.

Page 1/3 | 1 2 3  | Next Page >

  • Crystal reports - Encoding Issue UTF-8 / iso-8559-1

    - by Lloyd
    Hi, Has anyone had this error before when running reports in Crystal Reports 2008: Character set encoding from transport information [UTF-8] does not match with character set encoding in the received SOAP message [iso-8559]. I presume this indicates a file needs changing, but trying to fint it is causing me a real headache. There are references to UTF-8 all over the server. Any help would be great. Thanks, Lloyd.

    Read the article

  • Burning Snow Leopard DMG on Ubuntu

    - by Caitlann Lloyd
    So I have a SL Copy of Mac OS X Snow Leopard.DMG and I am running Ubuntu 12.0.4. I tried burn the DMG to a DVD using CD/DVD Creator however when I try, it comes up with a message saying 'The size of the file is over 2 GiB. Files larger than 2 GiB are not supported by the ISO9660 standard in its first and second versions (the most widespread ones). It is recommended to use the third version of the ISO9660 standard, which is supported by most operating systems, including Linux and all versions of Windows™. However, Mac OS X cannot read images created with version 3 of the ISO9660 standard.' How do I bypass this so my DVD is bootable on my iMac. By the way, I'm running Ubuntu on the iMac and it is my only partition. No other OS Installed

    Read the article

  • Macbook Pro Triple Boot OS X Lion, Windows 7 and Windows 8

    - by Lloyd Sparkes
    MacBook Pro (Summer 2010 Model, Basic Model) I currently have OS X Lion and Windows 7 running side by side on my MacBook Pro. However I have a need to get Windows 8 running as well in this mix (a Virtual Machine is not good enough, I need the performance). I have created a suitably sized parition (80GB) that is recognizable in Boot Camp. However every time I try to boot from the USB stick (that worked to install Windows 8 on my PC) using the latest version of rEFIt, it just boots Windows 7 and not the Windows 8 installer. I cannot start the installation within Windows 7 as it will just install over Windows 7. I'm guessing the Boot Camp emulation is doing something werid to stop the "Press any key to install Windows..." message from appearing (which should happen if the installer detects Windows is already installed (e.g. if you left your install disk in). Is there a way to get around this / force the installer to start? (Note I cannot start the Windows 7 installer either if I wanted to install a second copy of Windows 7 to upgrade to Windows 8)

    Read the article

  • Getting Correct Edition of Office 2007 from Serial Key

    - by Lloyd Sparkes
    I have been asked by a Client to refresh one of their Machines. To do this i managed to get Windows XP Setup to run in Repair mode, and while in setup i ran a serial key grabber, which grabbed the key for Office 2007 The only thing is that the key grabber didnt tell me what edition of Office 2007 was installed. I have aqquired a number of ISO's for the different editions (Home & Student, Standard, Professional, Ultimate) but the key doesnt work in any of them. Is there a way to get the edition from the Serial Key, or is there a generic ISO that will install any edition depending on the Serial Key?

    Read the article

  • Managing my TODO list - how to get organised

    - by sparkes
    What's the best way to organise my personal TODO list? and what tools are available for organising team TODO lists? Should I still be thinking in terms of TODO or are there better ways to manage my time and projects? See also this question on Organization which is similar

    Read the article

  • Accessing network shares on Windows7 via SonicWall VPN client

    - by Jack Lloyd
    I'm running Windows7 x64 (fully patched) and the SonicWall 4.2.6.0305 client (64-bit, claims to support Windows7). I can login to the VPN and access network resources (eg SSH to a machine that lives behind the VPN). However I cannot seem to be able to access shared filesystems. Windows is refusing to do discovery on the VPN network. I suspect part of the problem is Windows persistently considers the VPN connection to be a 'public network'. Normally, you can open the network and sharing center and modify this setting, however it does not give me a choice for the VPN. So I did the expedient thing and turned on file sharing for public networks. I also disabled the Windows firewall for good measure. Still no luck. I can access the server directly by putting \\192.168.1.240 in the taskbar, which brings up the list of shares on the server. However, trying to open any of the shares simply tells me "Windows cannot access \\192.168.1.240\share You do not have permission to access ..."; it never asks for a domain password. I also tried Windows7 native VPN functionality - it couldn't successfully connect to the VPN at all. I suspect this is because SonicWall is using some obnoxious special/undocumented authentication system; I had similar problems trying to connect on Linux with the normal IPsec tools there. What magical invocation or control panel option am I missing that will let this work? Are there any reasonable debugging strategies? I'm feeling quite frustrated at Windows tendency to not give me much useful information that might let me understand what it is trying to do and what is going wrong.

    Read the article

  • How can I quickly zoom in on the Mac OS X version of Word without having to use the menu?

    - by Lloyd
    (I'm using the Mac version MS Word 2011) I used to happily use the wheel mouse to zoom but, after upgrading to the Mac Magic mouse (using only finger slide movement to scroll and pan) I can no longer hold Ctrl and roll the mouse to zoom (driving me crazy) and I can't see a useful keyboard shortcut and the zoom slider bar in the lower right of the Word screen isn't practical (in my experience). Is there any way to zoom in on the Mac Version of Microsoft Word 2011 without resorting to using a menu?

    Read the article

  • Accessing network shares on Windows7 via SonicWall VPN client

    - by Jack Lloyd
    I'm running Windows7 x64 (fully patched) and the SonicWall 4.2.6.0305 client (64-bit, claims to support Windows7). I can login to the VPN and access network resources (eg SSH to a machine that lives behind the VPN). However I cannot seem to be able to access shared filesystems. Windows is refusing to do discovery on the VPN network. I suspect part of the problem is Windows persistently considers the VPN connection to be a 'public network'. Normally, you can open the network and sharing center and modify this setting, however it does not give me a choice for the VPN. So I did the expedient thing and turned on file sharing for public networks. I also disabled the Windows firewall for good measure. Still no luck. I can access the server directly by putting \\192.168.1.240 in the taskbar, which brings up the list of shares on the server. However, trying to open any of the shares simply tells me "Windows cannot access \\192.168.1.240\share You do not have permission to access ..."; it never asks for a domain password. I also tried Windows7 native VPN functionality - it couldn't successfully connect to the VPN at all. I suspect this is because SonicWall is using some obnoxious special/undocumented authentication system; I had similar problems trying to connect on Linux with the normal IPsec tools there. What magical invocation or control panel option am I missing that will let this work? Are there any reasonable debugging strategies? I'm feeling quite frustrated at Windows tendency to not give me much useful information that might let me understand what it is trying to do and what is going wrong.

    Read the article

  • Virtual box lost files

    - by Paul Lloyd
    I have been running Virtual Box on a Macbook Pro for a year or more, with an old version of Windows XP running on the virtual machine. Recently my Mac battery dies completely and I had left VB / Windows running. When I re-started the Mac, VB would not load. I reinstalled a recent download of VB from a DMG file I had stored. Now VB starts but when I try to start the virtual machine I get the following message, Failed to open a session for the virtual machine Windows XP. Failed to load VMMR0.r0 (VERR_SUPLIB_WRITE_NON_SYS_GROUP). Result Code: NS_ERROR_FAILURE (0x80004005) Component: Console Interface: IConsole {1968b7d3-e3bf-4ceb-99e0-cb7c913317bb} I have been backing up the MAC using Time Machine and have backups going back months. I really need to access the windows files as they have my Accounts and other business critical stuff. Any ideas please, or does anyone know where I can get some support for this combination of hardware / software, apologies I am a novice in this area. Thanks in advance.

    Read the article

  • Home server - HP Proliant Microserver - Software and setup - OS on USB stick?

    - by Lloyd Watkin
    I've just purchased a HP ProLiant Microserver for home use. I want to set up with web server, samba shares, the usual stuff. My question is really about system setup. It has an internal USB socket so I've attempted to install a copy of Fedora 14 onto it. I turned off X/Gnome, but it still ran like a pig. I've now put the OS on one of the internal disks (250Gb, 7200rpm), but I was wondering if there was a way to utilise the internal USB to give me better power-saving allowing the hard drives to be shut down when not in use. How would you set this server up? I'd rather not go to the extra cost of an SSD right now, but if that's the best way then so be it.

    Read the article

  • How to access Windows Server 2008 R2 file shares from a different subnet

    - by Lloyd Cotten
    We have a couple of severs that used to be Windows Server 2003 that we recently upgraded to Windows Server 2008 R2. A couple of details to set the situation up: We wiped the OS and re-installed. These servers are on one subnet (172.16.x.x) and we are trying to access some file shares on them from another subnet (10.34.x.x). Firewall is disabled on these servers. Trying to access with UNC "\172.16.x.x\sharename" and net use \172.16.x.x However, we're having problems doing this. We are getting "The network path was not found". Here's some of the things we've tried so far and the result: Tried accessing the share from other (non-2008) servers on the same subnet... Success! Ping servers from different subnet... Success! Telnet connection into port 139 from different subnet... Success! Took a scan through Local Security Policies to see if something obvious needed to be enabled / disabled / configured... Fail I'm not sure where to look next. I know that the router between the two subnets is locked down pretty good, but this did work for our 2003 servers. Has anything changed in the way of ports used for UNC / file share access in 2008? Maybe I'm missing some security policy setting? Hoping somebody can take pity on a poor programming guy that can't figure out something really simple. :-) Thanks!

    Read the article

  • How to find date/time used by Cassandra

    - by JDI Lloyd
    Earlier this morning I noticed that one of the nodes in our Cassandra cluster is writing logs an hour in the future, despite the date/time being correct on the OS. A couple of other nodes I checked via logs appear to be writing logs at the correct time. I now need to go through and check each node in our 80 node cluster and ensure cassandra is running on the correct time, problem being is some of the nodes don't write to the logs very often as they aren't doing much... the question is, is there some form of tool/utility (ie nodetool) that can tell me the time that cassandra is running on? All the systems date/times are correct, ntpdate cron in place has been for a while. Servers are set to Belize timezone to avoid DST changes so its nothing to do with that.

    Read the article

  • iMac 20inch (Mid 2007) SL DVD Boot Prohibitory Sign

    - by Caitlann Lloyd
    iMac 20inch (Mid 2007 Build) with Ubuntu 12.0.4 How I got in this situation I had a perfectly healthy Intel iMac running Snow Leopard several months ago. Then I got the dreaded spinning gear and several kernel panics. After getting a little frustrated (failing to find a solution online), I found an old macbook installation disk and used it to access Disk Utility. From here, I erased my entire hard drive leaving me with no OS. I then created a Ubuntu DVD and installed Ubuntu onto the system. Now, on Ubuntu, I wine installed Transmac and burned a Single layer copy (with languages, etc. removed to save space) of Snow Leopard onto a 4.7GB DVD. I tried to boot from it and was met with first the grey apple screen and a spinning cog before the grey apple shortly turned into the infamous prohibitory sign. Note: I met this problem previously when using Disk Utility to create a bootable USB of Snow Leopard, hence I severely doubt it has anything to do with the DVD created. Resources at my disposal 1 x iMac running Ubuntu 6 x 4.7GB DVDs 1 x USB Stick 12GB 1 x Windows 7 Laptop Resources I do not have Firewire cables Access to a prebuilt retail disk (Misplaced) Access to another Mac Apple Warranty I would be hugely grateful if someone was able to tell me how to install Snow Leopard again.

    Read the article

  • Home server - HP Proliant Microserver - Software and setup - OS on USB stick? [closed]

    - by Lloyd Watkin
    I've just purchased a HP ProLiant Microserver for home use. I want to set up with web server, samba shares, the usual stuff. My question is really about system setup. It has an internal USB socket so I've attempted to install a copy of Fedora 14 onto it. I turned off X/Gnome, but it still ran like a pig. I've now put the OS on one of the internal disks (250Gb, 7200rpm), but I was wondering if there was a way to utilise the internal USB to give me better power-saving allowing the hard drives to be shut down when not in use. How would you set this server up? I'd rather not go to the extra cost of an SSD right now, but if that's the best way then so be it.

    Read the article

  • How to test/debug bad network wiring?

    - by Jack Lloyd
    I recently bought a place already wired with Cat 5E (8 ports, leading to a central closet). However attempting to get link, nothing works. On closer examination, it was obvious that the ends in the closet were wired backwards (brown on pin 1, etc). The jacks that I've pulled out of the wall do look to be correctly done. However, testing with a network cable tester shows zero link between any of the jacks and any of the ports in the closet - I had expected to just see a 1/8, 2/7, ... 8/1 mismatch, but instead get nothing at all. The runs are accessible and look neat, though they take some bends that seem quite sharp and are in some cases much longer than they need to be (the person who put this in was a professional electrician but I suspect this was the first time he ran network cabling). My best guess at this point is that he either bought bad cable, or put so much tension on it that he snapped wires. Though it seems surprising/unlikely that I wouldn't get at least one active wire on one of the 8 lines. So, my question: is there anything else I should try or test before I go ripping out everything and running new cable?

    Read the article

  • UIPickerView selectedRowInComponent: returns stale data after code adjusts it

    - by Eric Lloyd
    I have a UIPickerView with multiple components. Some values are grayed out, and my pickerView:didSelectRow:inComponent honors this by shifting the picker component in question to the nearest valid value, much as UIDatePicker moves from "30" to "28" when you select "February". Then it calls a delegate method to announce the adjusted value. When my adjuster method calls my UIPickerView's selectRow:inComponent:animated:YES, the value on screen is correct, but the values from selectedRowInComponent: are stale (from before the adjustment for gray values). However, if I call selectRow:inComponent:animated:NO, the returned values are correct, but the lack of animation is jarring. I've tried wrapping the adjustment in a beginAnimations:/commitAnimations block and catching the values in UIView's +animationDidStopSelector, but I still get stale values. Has anyone run into this before?

    Read the article

  • scp via java

    - by Lloyd Meinholz
    What is the best method of performing an scp transfer via the Java programming language? It seems I may be able to perform this via JSSE, JSch or the bouncy castle java libraries. None of these solutions seem to have an easy answer.

    Read the article

  • Status of Data in Rollback of Large Transaction in SQL Server

    - by Lloyd Banks
    I have a data warehousing procedure that downloads and replaces dozens of tables from a linked server to a local database. Every once in a while, the code will get stuck on one of the tables on the linked server because the table on the linked server is in a state of transition. I am under the assumption that since the entire procedure is considered one transaction commit, when the procedure gets stuck, none of the changes made by the procudure so far would have committed. But the opposite seems to be true, tables that were "downloaded" before the procedure got stuck would have been updated with today's versions on the local server. Shouldn't SQL Server wait for the entire procedure to finish before the changes are durable? CREATE PROCEDURE MYIMPORT AS BEGIN SET NOCOUNT ON IF EXISTS (SELECT * FROM INFORMATION.SCHEMA.TABLES WHERE TABLE_NAME = 'TABLE1') DROP TABLE TABLE1 SELECT COLUMN1, COLUMN2, COLUMN3 INTO TABLE1 FROM OPENQUERY(MYLINK, 'SELECT COLUMN1, COLUMN2, COLUMN3 FROM TABLE1') IF EXISTS (SELECT * FROM INFORMATION.SCHEMA.TABLES WHERE TABLE_NAME = 'TABLE2') DROP TABLE TABLE2 SELECT COLUMN1, COLUMN2, COLUMN3 INTO TABLE2 FROM OPENQUERY(MYLINK, 'SELECT COLUMN1, COLUMN2, COLUMN3 FROM TABLE2') --IF THE PROCEDURE GETS STUCK HERE, THEN CHANGES TO TABLE1 WOULD HAVE BEEN MADE ON THE LOCAL SERVER WHILE NO CHANGES WOULD HAVE BEEN MADE TO TABLE3 ON THE LOCAL SERVER IF EXISTS (SELECT * FROM INFORMATION.SCHEMA.TABLES WHERE TABLE_NAME = 'TABLE3') DROP TABLE TABLE3 SELECT COLUMN1, COLUMN2, COLUMN3 INTO TABLE3 FROM OPENQUERY(MYLINK, 'SELECT COLUMN1, COLUMN2, COLUMN3 FROM TABLE3') END

    Read the article

  • How to loop through columns in an oracle pl/sql cursor.

    - by Lloyd
    I am creating a dynamic cursor and I would like to loop over the columns that exist in the cursor. How would I do that? For example: create or replace procedure dynamic_cursor(empid in varchar2, RC IN OUT sys_refcursor) as stmt varchar2(100); begin stmt := 'select * from employees where id = ' || empid; open crs for stmt using val; for each {{COLUMN OR SOMETHING}} --TODO: Get this to work loop; end;

    Read the article

  • How to deal with recursive dependencies between static libraries using the binutils linker?

    - by Jack Lloyd
    I'm porting an existing system from Windows to Linux. The build is structured with multiple static libraries. I ran into a linking error where a symbol (defined in libA) could not be found in an object from libB. The linker line looked like g++ test_obj.o -lA -lB -o test The problem of course being that by the time the linker finds it needs the symbol from libA, it has already passed it by, and does not rescan, so it simply errors out even though the symbol is there for the taking. My initial idea was of course to simply swap the link (to -lB -lA) so that libA is scanned afterwards, and any symbols missing from libB that are in libA are picked up. But then I find there is actually a recursive dependency between libA and libB! I'm assuming the Visual C++ linker handles this in some way (does it rescan by default?). Ways of dealing with this I've considered: Use shared objects. Unfortunately this is undesirable from the perspective of requiring PIC compliation (this is performance sensitive code and losing %ebx to hold the GOT would really hurt), and shared objects aren't needed. Build one mega ar of all of the objects, avoiding the problem. Restructure the code to avoid the recursive dependency (which is obviously the Right Thing to do, but I'm trying to do this port with minimal changes). Do you have other ideas to deal with this? Is there some way I can convince the binutils linker to perform rescans of libraries it has already looked at when it is missing a symbol?

    Read the article

  • Why can't nvcc find my Visual C++ installation?

    - by Jack Lloyd
    I'm running Windows 7 Pro x64 on a Core i5 with a NVIDIA 3100m, which is CUDA compatible. I've tried installing both the 32-bit and 64-bit CUDA toolkits from NVIDIA, unfortunately from with either of them I cannot compile anything; nvcc says "cannot find a supported cl version. Only MSVC 8.0 and MSVC 9.0 are supported". I have the x86 and x86-64 compilers installed via the Windows 7 SDK (compiler version 15.00.30729.01 for both arches). Both compilers are operating correctly; I've built and tested C and C++ code using them. I've tried running nvcc from command shells set up for both 32 bit and 64 bit compilation, and using the -ccbin command line option to nvcc to point it at the Visual C++ install directory. What is the right way of handling this setup? Is there some way I make nvcc be more verbose about what is going on? The -v flag isn't terrible helpful. Ideally some way to make it show what it is finding versus what it's expecting to find. Will this work better if I install Visual C++ Express instead? Or is only a commercial version of VC++ supported for use with CUDA?

    Read the article

  • How do I create an instance of this class in Android?

    - by Lloyd Banks
    I was wondering if it is possible to create an instance of this class (from the link, which creates a listview) from another class so that I can call on either lazyadapter.java or customizedlistview.java (not sure which one) to inflate that same listview. Is this possible? This is what I tried (obviously incorrect): CustomizedListView clv = new CustomizedListView(); clv.onCreate(...); source: http://www.androidhive.info/2012/02/android-custom-listview-with-image-and-text/ LazyAdapter.java import java.util.ArrayList; import java.util.HashMap; import android.app.Activity; import android.content.Context; import android.view.LayoutInflater; import android.view.View; import android.view.ViewGroup; import android.widget.BaseAdapter; import android.widget.ImageView; import android.widget.TextView; public class LazyAdapter extends BaseAdapter { private Activity activity; private ArrayList<HashMap<String, String>> data; private static LayoutInflater inflater=null; public ImageLoader imageLoader; public LazyAdapter(Activity a, ArrayList<HashMap<String, String>> d) { activity = a; data=d; inflater = (LayoutInflater)activity.getSystemService(Context.LAYOUT_INFLATER_SERVICE); imageLoader=new ImageLoader(activity.getApplicationContext()); } public int getCount() { return data.size(); } public Object getItem(int position) { return position; } public long getItemId(int position) { return position; } public View getView(int position, View convertView, ViewGroup parent) { View vi=convertView; if(convertView==null) vi = inflater.inflate(R.layout.list_row, null); TextView title = (TextView)vi.findViewById(R.id.title); // title TextView artist = (TextView)vi.findViewById(R.id.artist); // artist name TextView duration = (TextView)vi.findViewById(R.id.duration); // duration ImageView thumb_image=(ImageView)vi.findViewById(R.id.list_image); // thumb image HashMap<String, String> song = new HashMap<String, String>(); song = data.get(position); // Setting all values in listview title.setText(song.get(CustomizedListView.KEY_TITLE)); artist.setText(song.get(CustomizedListView.KEY_ARTIST)); duration.setText(song.get(CustomizedListView.KEY_DURATION)); imageLoader.DisplayImage(song.get(CustomizedListView.KEY_THUMB_URL), thumb_image); return vi; } } CustomizedListView.java import java.util.ArrayList; import java.util.HashMap; import org.w3c.dom.Document; import org.w3c.dom.Element; import org.w3c.dom.NodeList; import android.app.Activity; import android.os.Bundle; import android.view.View; import android.widget.AdapterView; import android.widget.AdapterView.OnItemClickListener; import android.widget.ListView; public class CustomizedListView extends Activity { // All static variables static final String URL = "http://api.androidhive.info/music/music.xml"; // XML node keys static final String KEY_SONG = "song"; // parent node static final String KEY_ID = "id"; static final String KEY_TITLE = "title"; static final String KEY_ARTIST = "artist"; static final String KEY_DURATION = "duration"; static final String KEY_THUMB_URL = "thumb_url"; ListView list; LazyAdapter adapter; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); ArrayList<HashMap<String, String>> songsList = new ArrayList<HashMap<String, String>>(); XMLParser parser = new XMLParser(); String xml = parser.getXmlFromUrl(URL); // getting XML from URL Document doc = parser.getDomElement(xml); // getting DOM element NodeList nl = doc.getElementsByTagName(KEY_SONG); // looping through all song nodes <song> for (int i = 0; i < nl.getLength(); i++) { // creating new HashMap HashMap<String, String> map = new HashMap<String, String>(); Element e = (Element) nl.item(i); // adding each child node to HashMap key => value map.put(KEY_ID, parser.getValue(e, KEY_ID)); map.put(KEY_TITLE, parser.getValue(e, KEY_TITLE)); map.put(KEY_ARTIST, parser.getValue(e, KEY_ARTIST)); map.put(KEY_DURATION, parser.getValue(e, KEY_DURATION)); map.put(KEY_THUMB_URL, parser.getValue(e, KEY_THUMB_URL)); // adding HashList to ArrayList songsList.add(map); } list=(ListView)findViewById(R.id.list); // Getting adapter by passing xml data ArrayList adapter=new LazyAdapter(this, songsList); list.setAdapter(adapter); // Click event for single list row list.setOnItemClickListener(new OnItemClickListener() { @Override public void onItemClick(AdapterView<?> parent, View view, int position, long id) { } }); } }

    Read the article

  • How much of Grails GORM to test?

    - by Lloyd Meinholz
    Is there a "best practice" or defacto standard with how much of the GORM functionality one should test in the unit/functional tests? My take is that one should probably do most of the domain testing as functional tests so that you get the full grails environment. But what do you test? Inserts, updates, deletes? Do you test constraints even though they were probably more thoroughly tested by the grails release? Or do you just assume that GORM does what it is supposed to do and move to other parts of the application?

    Read the article

1 2 3  | Next Page >