mateusz rogulski - Developer IT

How to restore Windows7 after restore ubuntu bootloader?

- by Mateusz Rogulski

At first I will describe my situation in a few points: I have installed Windows7, and then Ubuntu 11.04 on my machine. Then everything works fine and at start of system I have screen from linux where I can choose the system. Then I reinstall Windows7 and install Windows 8 on other partition. Then I can choose between Win7 and win8 when I start system. Then I need my Ubuntu back so I want restore my bootloader from Ubuntu. I boot Ubuntu from USB and in terminal write this commands: sudo fdisk -l Then I get: /dev/sda1 1 13 104391 de Dell Utility /dev/sda2 14 2805 22425601 5 Rozszerzona /dev/sda3 * 2805 41968 314572800 7 HPFS/NTFS /dev/sda4 41968 60802 151282688 7 HPFS/NTFS /dev/sda5 14 2445 19530752 83 Linux /dev/sda6 2445 2805 2893824 82 Linux swap / Solaris Next commands: sudo mount /dev/sda5 /mnt sudo mount --bind /dev /mnt/dev sudo mount --bind /proc /mnt/proc sudo chroot /mnt grub-install /dev/sda I get Installation finished. No error reported.. And when I start my machine I have old Ubuntu start screen to choose system. Ubuntu works well. But There are no Windows 8 option. But my primary problem is when I choose Windows 7 I have: error: no such device ... error: no such disk so I have no idea what can I do. I really need both systems to work. Any help would be appreciated.

Read the article

Apache - virtualhost - works only one

- by user1811829

I need a couple of virtualhosts on my local dev machine. Unfortunately it needs to be windows. httpd-vhost.conf <VirtualHost *:80> ServerAdmin mateusz[email protected] DocumentRoot "C:/xampp/htdocs" ServerName localhost </VirtualHost> <VirtualHost *:80> ServerAdmin mateusz[email protected] DocumentRoot "C:/xampp/htdocs/manadom.local/public" ServerName manadom.local ErrorLog "logs/manadom.local-error.log" CustomLog "logs/manadom.local-access.log" combined </VirtualHost> <VirtualHost *:80> ServerAdmin mateusz[email protected] DocumentRoot "C:/xampp/htdocs/galeriabiznesu" ServerName gb.loc ErrorLog "logs/gb.loc-error.log" CustomLog "logs/gb.loc-access.log" combined </VirtualHost> And hosts file: 127.0.0.1 localhost 127.0.0.1 manadom.local 127.0.0.1 gb.loc The problem is: localhost points to C:/xampp/htdocs/manadom.local/public manadom.local points to C:/xampp/htdocs/manadom.local/public too gb.loc points to C:/xampp/htdocs/manadom.local/public I can't idea what's wrong? Please help me, i'm not an admin but i read about it lot and i don't know what possibly i can do wrong.

Read the article

Windows7 Console with session memory [closed]

- by Mateusz

I am searching console for windows 7 which have memory of typed commands which is stored when I close the cmd prompt. I got frustrated when I have to type again paths with commands, I'm developing for android and I use adb so you can know it can be quite a lot of commands to issue. Other workarounds would be appreciated. Open source or freeware prefed. I have, Console2 (don't store commands), git bash (can't work with that, have some paths issues).

Read the article

Move samba and ldap config to new machine

- by Mateusz W

I'm not advanced administrator so this may be n00b question but I'll be grateful for help. I have following problem: I have to move my server (ubuntu server) from old machine to new. I have samba & ldap on old server, so I've copied the configuration files from the old machine to new machine, made smbldap-populate, and when I use smbldap-userlist on the new machine it lists all users from the old machine. But when I try to log in as any of these users, or show its id (id username) I get no such user error. What more I have to do to use these accounts on the new machnie?

Read the article

how to master in Windows administration [closed]

- by Mateusz

what is, in your opinion, best way to become real Windows, advanced administrator? Of course it's possible to obtain MS Certificates, but they're rather very expensive. Almost two years of everyday working on Linux machine, teach me, that it's very important to read system logs. Anyway, I assume that it's enough - I think that you must be familiar with almost any hive in you registry and each trick in Windows CMD and VBS- although it's high time for PowerShell, still on many maschines, you have only an opprotunity of using CMD by default (and their owners are reluctant to install anything else). How I can accomplish this task? Which groups follows (superUser - it' obligatory), which articles read?

Read the article

VIM disable highlighting upon search deletion

- by mateusz

I recently learned a new shortcut in VIM that I find extremely useful. d/search_text Which will delete everything up to, but not including, "search_text", from the current position. However, the thing that is annoying is that this will highlight all occurrences of "search_text" after performing the operation. Is there any way that I could disable the highlight feature when performing this operation?

Read the article

seamless mode remote desktop connection from linux to windows

- by mateusz.fiolka

I am a programmer using Linux as my main OS, however sometimes I need to use windows (ie, office, ea). I'm running qemu with kvm to access the windows "machine". I would like to achieve something that is described here: https://help.ubuntu.com/community/SeamlessVirtualization (It means I would be able to run chosen applications on Windows and then display them locally on Linux as separate windows achieving good desktop integration). However seamless rdp is buggy and doesn't work on my machine (probably because I'm using a tiling window manager and a 64bit system). Are you aware of any other solution then rdp seamless mode? I would prefer to still use quemu because it uses cpu hardware virtualization, so different protocol/client combination would be preferable.

Read the article

E160 ubuntu 12.04 can't detect the modem

- by Matt

i've got problem with e160 on ubuntu 12.04. I'cant configure network manager and connect because NM can't see the e160. I;ve tried lot of solutions with no result. ateusz@mateusz-Aspire-5738:~$ sudo usb_modeswitch -v 0x12d1 -p 0x1003 -H [sudo] password for mateusz: aLooking for default devices ... found matching product ID adding device Found device in default mode, class or configuration (1) Accessing device 002 on bus 001 ... Getting the current device configuration ... OK, got current device configuration (1) Using first interface: 0x00 Using endpoints 0x01 (out) and 0x82 (in) Not a storage device, skipping SCSI inquiry USB description data (for identification) ------------------------- Manufacturer: HUAWEI Technology Product: HUAWEI Mobile Serial No.: not provided ------------------------- Sending Huawei control message ... OK, Huawei control message sent - Run lsusb to note any changes. Bye. Dmesg [ 521.480062] usb 1-4: reset high-speed USB device number 4 using ehci_hcd [ 521.617792] option 1-4:1.1: GSM modem (1-port) converter detected [ 521.617945] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB0 [ 521.618062] option 1-4:1.0: GSM modem (1-port) converter detected [ 521.618232] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB1 [ 530.840276] option: option_instat_callback: error -108 [ 530.840455] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 530.840484] option 1-4:1.0: device disconnected [ 537.680378] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 537.680398] option 1-4:1.1: device disconnected [ 537.792088] usb 1-4: reset high-speed USB device number 4 using ehci_hcd [ 537.929549] option 1-4:1.1: GSM modem (1-port) converter detected [ 537.929702] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB0 [ 537.929818] option 1-4:1.0: GSM modem (1-port) converter detected [ 537.929993] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB1 [ 547.224294] option: option_instat_callback: error -108 [ 547.224470] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 547.224511] option 1-4:1.0: device disconnected [ 556.988066] tty_ldisc_hangup: waiting (usb-storage) for ttyUSB0 took too long, but we keep waiting... [ 558.990663] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 558.990698] option 1-4:1.1: device disconnected [ 559.100068] usb 1-4: reset high-speed USB device number 4 using ehci_hcd [ 559.241293] option 1-4:1.1: GSM modem (1-port) converter detected [ 559.241446] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB0 [ 559.241565] option 1-4:1.0: GSM modem (1-port) converter detected [ 559.241739] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB1 [ 568.728283] option: option_instat_callback: error -108 [ 568.728466] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 568.728496] option 1-4:1.0: device disconnected lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 003: ID 064e:a103 Suyin Corp. Acer/HP Integrated Webcam [CN0314] Bus 005 Device 002: ID 09da:c20a A4 Tech Co., Ltd Bus 001 Device 002: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E230/E270/E870 HSDPA/HSUPA Modem

Read the article

Matlab: Analysis of signal

- by Mateusz

Hi, I have a problem with this task: For free route perform frequency analysis and give parametrs of each signal component: time of beginning and ending of each component beginning and ending frequency amplitude (in time domain) in the beginning and end of each signal's component level of noise in dB Assume, that, the parametrs of each component like amplitude, frequency is changing lineary in time. Frequency of sampling is 1000Hz For example I have signal like this: Nx=64; fs=1000; t=1/fs*(0:Nx-1); %========================== A1=1; A2=4; f1=500; f2=1000; x1=A1*cos(2*pi*f1*t); x2=A2*sin(2*pi*f2*t); %========================== x=x1+x2;

Read the article

jsf messed up links

- by Mateusz

I'm new to JSF. My application is working, but I'm confused with links in browser when using controller. BTW, there is also PrimeFaces in my app so don't be suprised with p: tags. Let's say I have 'list' and 'show' pages with controller doing redirection between them. First I'm on http://localhost:8080/y/r/conversation/list.xhtml page. There is link created with line <p:commandLink action="#{lazyConversationBean.doShow(conv)}" ajax="false" value="View"/>. lazyConversationBean acts here as my Controller. There is method: public String doShow(Conversation c) { this.setSelectedConversation(c); return "view"; } from which I got redirected to ...... again http://localhost:8080/y/r/conversation/list.xhtml (browser shows it) even when it's correct http://localhost:8080/y/r/conversation/view.xhtml page. There I have link <p:commandButton action="#{lazyConversationBean.doList()}" ajax="false" value="Back to list"/> and again controller has method: public String doList() { return "list"; } from which I got redirected to ... yeah, you guessed right ... http://localhost:8080/y/r/conversation/view.xhtml (that is again what browser shows) even when again it is correct http://localhost:8080/y/r/conversation/list.xhtml page. It seams as browser link area is always one step behind page currently being displayed. I don't even know if it's some incorrect behaviour as I have no idea how to query google for this :D Just for test I did this short tutorial, where netbeans created whole stack of code on one of my entities, and behaviour was the same, so it's not PrimeFaces magic related. Can you tell my why it happens, and how to fix it? Users likes to copy correct links ;)

Read the article

Favoriting system on Appengine

- by Mateusz Cieslak

Hi, I have the following model structure class Authors(db.Model) : nickname = db.StringProperty(required=True) fullname = db.StringProperty(required=True) class Articles(db.Model) : title = db.StringProperty(required=True) body = db.StringProperty(required=True) author = db.ReferenceProperty(Authors, required=True) class Favorites(db.Model) : who = db.ReferenceProperty(Authors, required=True) what = db.ReferenceProperty(Articles, required=True) I'd like to display 10 last articles according to this pattern: article.title, article.body, article.author(nickname), info if this article has been already favorited by the signed in user. I have added a function which I use to get the authors of these articles using only one query (it is described here) But I don't know what to do with the favorites (I'd like to know which of the displayed articles have been favorited by me using less than 10 queries (I want to display 10 articles)). Is it possible?

Developer IT