Search Results

Search found 11190 results on 448 pages for 'metasyntactic variable'.

Page 1/448 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Scientific evidence that supports using long variable names instead of abbreviations?

  - by Sebastian Dietz

  Is there any scientific evidence that the human brain can read and understand fully written variable names better/faster than abbreviated ones? Like PersistenceManager persistenceManager; in contrast to PersistenceManager pm; I have the impression that I get a better grasp of code that does not use abbreviations, even if the abbreviations would have been commonly used throughout the codebase. Can this individual feeling be backed up by any studies?

  Read the article

• Class scope variable vs method scope variable

  - by Masud

  I know that variable scope is enclosed by a start of block { and an end of block }. If the same variable is declared within the block, then the compile error Variable already defined occurs. But take a look at following example. public class Test{ int x=0;// Class scope variable public void m(){ int x=9; //redeclaration of x is valid within the scope of same x. if(true){ int x=7; // but this redeclaration generates a compile time error. } } Here, x can be redeclared in a method, although it's already declared in the class. But in the if block, x can't be redeclared. Why is it that redeclaration of a class scope variable doesn't generate an error, but a method scope variable redeclaration generates an error?

  Read the article

• How to pass results of bc to a variable

  - by shaolin

  I'm writing a script and I would like to pass the results from bc into a variable. I've declared 2 variables (var1 and var2) and have given them values. In my script I want to pass the results from bc into another variable say var3 so that I can work with var3 for other calculations. So far I have been able write the result to a file which is not what I'm looking for and also I've been able to echo the result in the terminal but I just want to pass the result to a variable at moment so that I can work with that variable. echo "scale=2;$var1/var2" | bc

  Read the article

• SQL SERVER – How to Set Variable and Use Variable in SQLCMD Mode

  - by Pinal Dave

  Here is the question which I received the other day on SQLAuthority Facebook page. Social media is a wonderful thing and I love the active conversation between blog readers and myself – actually I think social media adds lots of human factor to any conversation. Here is the question - “I am using sqlcmd in SSMS – I am not sure how to declare variable and pass it, for example I have a database and it has table, how can I make the table variable dynamic and pass different value everytime?” Fantastic question, and here is its very simple answer. First of all, enable sqlcmd mode in SQL Server Management Studio as described in following image. Now in query editor type following SQL. :SETVAR DatabaseName “AdventureWorks2012″ :SETVAR SchemaName “Person” :SETVAR TableName “EmailAddress“ USE $(DatabaseName); SELECT * FROM $(SchemaName).$(TableName); Note that I have set the value of the database, schema and table as a sqlcmd variable and I am executing the query using the same parameters. Well, that was it, sqlcmd is a very simple language to master and it also aids in doing various tasks easily. If you have any other sqlcmd tips, please leave a comment and I will publish it with due credit. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL, Technology Tagged: sqlcmd

  Read the article

• How to Pass a JS Variable to a PHP Variable

  - by dmullins

  Hello: I am working on a web application that currently provides a list of documents in a MySql database. Each document in the list has an onclick event that is suppose to open the specific document, however I am unable to do this. My list gets popluated using Ajax. Here is the code excerpt (JS): function stateChanged() { if (xmlhttp.readyState==4) { //All documents// document.getElementById("screenRef").innerHTML="<font id='maintxt'; name='title'; onclick='fileopen()'; color='#666666';>" + xmlhttp.responseText + "</font>"; } } } The onclick=fileopen event above triggers the next code excerpt, which downloads the file (JS): function stateChanged() { if (xmlhttp.readyState==4) { //Open file var elemIF = document.createElement("iframe"); elemIF.src = url; elemIF.style.display = "none"; document.body.appendChild(elemIF); } } } Lastly, the openfile onclick event triggers the following php code to find the file for downloading (php): $con = mysql_connect("localhost", "root", "password"); if (!$con) { die('Could not connect: ' . mysql_error()); } mysql_select_db("Documents", $con); $query = mysql_query("SELECT name, type, size, content FROM upload WHERE name = NEED JS VARIABLE HERE"); $row = mysql_fetch_array($query); header ("Content-type: ". $row['type']); header ("Content-length: ". $row['size']); header ("Content-Disposition: attachement; filename=". $row['name']); echo $row['content']; This code works well, for downloading a file. If I omit the WHERE portion of the Sql query, the onclick event will download the first file. Somehow, I need to get the screenRef element text and change it into a variable that my php file can read. Does anyone know how to do this? Also, without any page refreshes. I really appreciate everyone's feedback and thank you in advance. DFM

  Read the article

• MooTools/JavaScript variable scope

  - by 827

  I am trying to make each number displayed clickable. "1" should alert() 80, "2" should produce 60, etc. However, when the alert(adjust) is called, it only shows 0, not the correct numbers. However, if the commented out alert(adjust) is uncommented, it produces the correct number on page load, but not on clicking. I was wondering why the code inside addEvents cannot access the previously defined variable adjust. <html> <head> <script type="text/javascript" charset="utf-8" src="mootools.js"></script> <script type="text/javascript" charset="utf-8"> window.addEvent('domready', function() { var id_numbers = [1,2,3,4,5]; for(var i = 0; i<id_numbers.length; i++) { var adjust = (20 * (5 - id_numbers[i])); // alert(adjust); $('i_' + id_numbers[i]).addEvents({ 'click': function() { alert(adjust); } }); } }); </script> </head> <body> <div id="i_1">1</div> <div id="i_2">2</div> <div id="i_3">3</div> <div id="i_4">4</div> <div id="i_5">5</div> </body> </html> Thanks.

  Read the article

• PHP variable in variable

  - by FFish

  I have set an array in my config file that I use global in my functions. This works fine, but now I want to pass the name of this array as a @param in my function. // in config file: $album_type_arr = array("appartamento", "villa"); global $album_type_arr; // pull in from db_config echo $album_type_arr[0]; function buildmenu($name) { $test = global $name . "_arr"; echo $test[0]; } buildmenu("album_type");

  Read the article

• if ('constant' == $variable) vs. if ($variable == 'constant')

  - by Tom Auger

  Lately, I've been working a lot in PHP and specifically within the WordPress framework. I'm noticing a lot of code in the form of: if ( 1 == $options['postlink'] ) Where I would have expected to see: if ( $options['postlink'] == 1 ) Is this a convention found in certain languages / frameworks? Is there any reason the former approach is preferable to the latter (from a processing perspective, or a parsing perspective or even a human perspective?) Or is it merely a matter of taste? I have always thought it better when performing a test, that the variable item being tested against some constant is on the left. It seems to map better to the way we would ask the question in natural language: "if the cake is chocolate" rather than "if chocolate is the cake".

  Read the article

• ASP.NET C# Session Variable

  - by SAMIR BHOGAYTA

  You can make changes in the web.config. You can give the location path i.e the pages to whom u want to apply the security. Ex. 1) In first case the page can be accessed by everyone. // Allow ALL users to visit the CreatingUserAccounts.aspx // location path="CreatingUserAccounts.aspx" system.web authorization allow users="*" / /authorization /system.web /location 2) in this case only admin can access the page // Allow ADMIN users to visit the hello.aspx location path="hello.aspx" system.web authorization allow roles="ADMIN' / deny users="*" / /authorization /system.web /location OR On the every page you need to check the authorization according to the page logic ex: On every page call this if (session[loggeduser] !=null) { DataSet dsUser=(DataSet)session[loggeduser]; if (dsUser !=null && dsUser.Tables.Count0 && dsUser.Tables[0] !=null && dsUser.Tables[0].Rows.Count0) { if (dsUser.Table[0].Rows[0]["UserType"]=="SuperAdmin") { //your page logic here } if (dsUser.Table[0].Rows[0]["UserType"]=="Admin") { //your page logic here } } }

  Read the article

• 'Object variable or With block variable not set' error when setting a range in VBA

  - by David Gard

  I have a function that creates a Pivot Table, but I am getting an error when I try to set a range that will be merged and have a title added to it. In the below code, pivot_title_range is a 'String' variable, and is optional when calling the funtion. title_range is a 'Range' variable. Both lines that set the range (whether or not the users declares pivot_title_range) cause the same error. If pivot_title_range = "" Then title_range = ActiveSheet.Range("B3:E4") Else title_range = ActiveSheet.Range(pivot_title_range) End If Here is the error that I am getting - Run-time error '91': Object variable or With block variable not set If required, here is a Pastebin of the full function - http://pastebin.com/L711jayc. The offending code starts on line 160. Is anybody able to tell me what I am doing wrong? Thanks.

  Read the article

• Am I immoral for using a variable name that differs from its type only by case?

  - by Jason Baker

  For instance, take this piece of code: var person = new Person(); or for you Pythonistas: person = Person() I'm told constantly how bad this is, but have yet to see an example of the immorality of these two lines of code. To me, person is a Person and trying to give it another name is a waste of time. I suppose in the days before syntax highlighting, this would have been a big deal. But these days, it's pretty easy to tell a type name apart from a variable name. Heck, it's even easy to see the difference here on SO. Or is there something I'm missing? If so, it would be helpful if you could provide an example of code that causes problems.

  Read the article

• Safest way to change variable names in a project

  - by kamziro

  So I've been working on a relatively large project by myself, and I've come to realise that some of the variable names earlier on were.. less than ideal. But how does one change variable names in a project easily? Is there such a tool that can go through a project directory, parse all the files, and then replace the variable names to the desired one? It has to be smart enough to understand the language I imagine. I was thinking of using regexp (sed/awk on linux?) tools to just replace the variable name, but there were many times where my particular variable is also included as a part of strings. There's also the issue about changing stuff on a c++ namespace, because there is actually two classes in my project that share the same name, but are in different namespaces. I remember visual stuio being able to do this, but what's the safest and most elegant way to do this on linux?

  Read the article

• Javascript redeclared global variable overrides old value

  - by Yousuf Haider

  I ran into an interesting issue the other day and was wondering if someone could shed light on why this is happening. Here is what I am doing (for the purposes of this example I have dumbed down the example somewhat): I am creating a globally scoped variable using the square bracket notation and assigning it a value. Later I declare a var with the same name as the one I just created above. Note I am not assigning a value. Since this is a redeclaration of the same variable the old value should not be overriden as described here: http://www.w3schools.com/js/js_variables.asp //create global variable with square bracket notation window['y'] = 'old'; //redeclaration of the same variable var y; if (!y) y = 'new'; alert(y); //shows New instead of Old The problem is that the old value actually does get overriden and in the above eg. the alert shows 'new' instead of 'old'. Why ? I guess another way to state my question is how is the above code different in terms of semantics from the code below: //create global variable var y = 'old'; //redeclaration of the same variable var y; if (!y) y = 'new'; alert(y); //shows Old

  Read the article

• Uiimport does not save variable to base workspace

  - by Tim

  I tried using uiimport to load a file to the base workspace.....It worked first time....but after trying again after a while...I wasnt seeing the variable in the base work space. I used the default variable name which is given by 'uiimport". This was the command I used: uiimport(filename) And two variables where created by default..."data" and "textdata"(which is the header)....but now when i run it is no longer saved in the base workspace I do not want to assign a variable to the uiimport like so... K = uiimport(filename) assignin(base,'green',K) I do not want to do that because My dataset has a text header and the data itself, and doing this would assign both "textdata" and "data" to "green" variable How would I be able to get the dimensions of ONLY the "data" in green and how would I pass only "data"(which is in the green variable in the workspace.."rmbr"...the green variable holds both "data" and "textdata") to another function. I was able to do all this when the uiimport automatically saved the variables in the base workspace....but somehow now it doesn't. I would appreciate any help or tips on this matter

  Read the article

• variable in variable in batch and delayed expansion

  - by rezna

  Hi, I'm trying to use variable in variable in conjunction with delayed expansion but still no luck. SETLOCAL EnableDelayedExpansion SET ERROR_COMMAND=exit /B ^!ERRORLEVEL^! This is my last try. I want to setup an ERROR_COMMAND to be called when one of the steps in batch file crashes. The command is supposed to be: IF ERRORLEVEL 1 !ERROR_COMMAND! or IF ERRORLEVEL 1 %ERROR_COMMAND% The thing is, I'm not able to find out, how to SET properly the ERROR_COMMAND variable, so that ERRORLEVEL is not evaluated at the time of assignment, but at the time of evaluating the variable Of course I can copy&paste the code all over the batch file, but using the variable just seems a bit prettier... Anyone? Thanks, Milan

  Read the article

• How to get the original variable name of variable passed to a function

  - by Acorn

  Is it possible to get the original variable name of a variable passed to a function? E.g. foobar = "foo" def func(var): print var.origname So that: func(foobar) Returns: >>foobar EDIT: All I was trying to do was make a function like: def log(soup): f = open(varname+'.html', 'w') print >>f, soup.prettify() f.close() .. and have the function generate the filename from the name of the variable passed to it. I suppose if it's not possible I'll just have to pass the variable and the variable's name as a string each time.

  Read the article

• Using xsl:variable in a xsl:foreach select statment

  - by Nefariousity

  I'm trying to iterate through an xml document using xsl:foreach but I need the select=" " to be dynamic so I'm using a variable as the source. Here's what I've tried: ... <xsl:template name="SetDataPath"> <xsl:param name="Type" /> <xsl:variable name="Path_1">/Rating/Path1/*</xsl:variable> <xsl:variable name="Path_2">/Rating/Path2/*</xsl:variable> <xsl:if test="$Type='1'"> <xsl:value-of select="$Path_1"/> </xsl:if> <xsl:if test="$Type='2'"> <xsl:value-of select="$Path_2"/> </xsl:if> <xsl:template> ... <!-- Set Data Path according to Type --> <xsl:variable name="DataPath"> <xsl:call-template name="SetDataPath"> <xsl:with-param name="Type" select="/Rating/Type" /> </xsl:call-template> </xsl:variable> ... <xsl:for-each select="$DataPath"> ... The foreach threw an error stating: "XslTransformException - To use a result tree fragment in a path expression, first convert it to a node-set using the msxsl:node-set() function." When I use the msxsl:node-set() function though, my results are blank. I'm aware that I'm setting $DataPath to a string, but shouldn't the node-set() function be creating a node set from it? Am I missing something? When I don't use a variable: <xsl:for-each select="/Rating/Path1/*"> I get the proper results. Here's the XML data file I'm using: <Rating> <Type>1</Type> <Path1> <sarah> <dob>1-3-86</dob> <user>Sarah</user> </sarah> <joe> <dob>11-12-85</dob> <user>Joe</user> </joe> </Path1> <Path2> <jeff> <dob>11-3-84</dob> <user>Jeff</user> </jeff> <shawn> <dob>3-5-81</dob> <user>Shawn</user> </shawn> </Path2> </Rating> My question is simple, how do you run a foreach on 2 different paths?

  Read the article

• PHP class constant string variable spanning over multiple lines

  - by ebae

  I want to have a string variable for a PHP class, which would be available to all methods. However, this variable is quite long, so I want to separate it into multiple lines. For example, $variable = "line 1" . "line 2" . "line 3"; But above doesn't work. I tried EOD, but EOD is not allowed within class. And when I declare it outside the class, I can't access the variable from within the class. What is the best way?

  Read the article

• Are variable length arrays possible with Javascript

  - by Ankur

  I want to make a variable length array in Javascript. Is this possible. A quick google search for "Javascript variable length array" doesn't seem to yield anything, which would be surprising if it were possible to do this. Should I instead have a String that I keep appending to with a separator character instead, or is there a better way to get a varible length array-like variable.

  Read the article

• LIKE operator with $variable

  - by skarama

  This is my first question here and I hope it is simple enough to get a quick answer! Basically, I have the following code: $variable = curPageURL(); $query = 'SELECT * FROM `tablename` WHERE `columnname` LIKE '$variable' ; If I echo the $variable, it prints the current page's url( which is a javascript on my page) Ultimately, what I want, is to be able to make a search for which the search-term is the current page's url, with wildcards before and after. I am not sure if this is possible at all, or if I simply have a syntax error, because I get no errors, simply no result! I tried : $query = 'SELECT * FROM `tablename` WHERE `columnname` LIKE '"echo $variable" ' ; But again, I'm probably missing or using a misplaced ' " ; etc. Please tell me what I'm doing wrong!

  Read the article

• Redeclared javascript global variable overrides old value in IE

  - by Yousuf Haider

  (creating a separate question after comments on this: http://stackoverflow.com/questions/2634410/javascript-redeclared-global-variable-overrides-old-value) I am creating a globally scoped variable using the square bracket notation and assigning it a value inside an external js file. In another js file I declare a var with the same name as the one I just created above. Note I am not assigning a value. Since this is a redeclaration of the same variable the old value should not be overriden as described here: http://www.w3schools.com/js/js_variables.asp Create 2 javascript files with the following content : Script1 //create global variable with square bracket notation window['y'] = 'old'; Script2 //redeclaration of the same variable var y; if (!y) y = 'new'; alert(y); //shows New instead of Old in IE Include these 2 files in your html file <html> <head></head> <body> <script type="text/javascript" src="my.js"></script> <script type="text/javascript" src="my2.js"></script> </body> </html> Opening this page in Firefox and Chrome alerts 'old' which is the expected behavior. However in IE 8 the page will actually alert 'new' Any ideas on why this happens on IE ?

  Read the article

• Bash: Variable substitution in variable name with default value

  - by krissi

  i have the following variables: # config file MYVAR_DEFAULT=123 MYVAR_FOO=456 #MYVAR_BAR unset # program USER_INPUT=FOO TARGET_VAR=<need to be set> If the USER_INPUT is "foo", I want TARGET_VAR to be the value of MYVAR_FOO (TARGET_VAR=456). If USER_INPUT is "bar" I want TARGET_VAR to be set to MYVAR_DEFAULT (123), because MYVAR_BAR is unset. I prefer it to be sh-compatible and as a substitution string. But it might also be bash compatible and/or in a function. I got these snippets: # Default values for variable (sh-compatible) echo ${MYVAR_FOO-$MYVAR_DEFAULT} # Uppercase (bash compatible) echo ${USER_INPUT^^} I would need something like this: TARGET_VAR="${MYVAR_${USER_INPUT^^}-$MYVAR_DEFAULT}" # or somecommand -foo "${MYVAR_${USER_INPUT^^}-$MYVAR_DEFAULT}" This is to switch a bunch of variables between multiple "profiles". In the example, FOO and BAR are profiles. New profiles should be added easily, in this example there would be an implicit profile named BAZ, too, all variables to their default values. Unfortunately it is not that easy. Do you have an idea to solve this? Thanks in advance, krissi

  Read the article

• Apache RewriteRule with a RewriteMap variable substitution for the VAL argument to environment variable

  - by Eric

  I have an Apache server that serves up binary files to an application (not a browser). The application making the request wants the HTTP Content-MD5 header in HEX format. The default and only option within Apache is Base64. If I add "ContentDigest on" to my VirtualHost, I get this header in Base64. So I wrote a perl script, md5digesthex.pl, that gives me exactly what I want: MD5 in HEX format but I'm struggling with the RewriteRule to get my server to send the result. Here is my current Rewrite recipe: RewriteEngine on RewriteMap md5inhex prg:/www/download/md5digesthex.pl RewriteCond %{REQUEST_URI} ^/download/(.*) RewriteRule ^(.*) %{REQUEST_URI} [E=HASH:${md5inhex:$1}] Header set Content-MD5 "%{HASH}e" env=HASH The problem is that I can't seem to set the HASH environment variable based on the output of the md5inhex map function. It appears this behavior is not supported and I'm at a lost as to how to formulate this...

  Read the article

• Swapping two variable value without using 3rd variable

  - by Muhammad Akhtar

  One of the very tricky question asked in an interview... we need to swap the values of two variables like a=10 and b=15 Generaly to swap two variables values, we need 3rd variable like.. temp=a a=b b=temp Now the requirement is, swaping value of two variable values without using 3rd variable? How can be accopmplish this?

  Read the article

• How to Use an Environment Variable as an Environment Variable Name

  - by Synetech inc.

  Hi, In my pursuit of a solution to another environment-variable/batch-file related problem, I have once again come across a problem I have visited before (but cannot for the life of me remember how, or even if I solved it). Say you have two BAT files (or one batch file and the command line). How can one pass an environment variable name to the other so that it can read the variable? The following example does not work: A.BAT: @call b.bat path B.BAT: @echo %%1% > A.BAT > %1 > B.BAT path > %1 It is easy enough to pass the environment variable name, but the callee cannot seem to use it. (I don’t remember if or how I dealt with this the last time it came up, but I suspect it required the less-than-ideal use of redirecting temporary BAT files and calling them and such.) Any ideas? Thanks.

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >