Search Results

Search found 117 results on 5 pages for 'mk persia'.

Page 1/5 | 1 2 3 4 5  | Next Page >

• How to solve CUDA crash when run CUDA example fluidsGL?

  - by sam

  I use ubuntu 12.04 64 bits with GTX560Ti. I install CUDA by following instruction: wget http: //developer.download.nvidia.com/compute/cuda/4_2/rel/toolkit/cudatoolkit_4.2.9_lin ux_64_ubuntu11.04.run wget http: //developer.download.nvidia.com/compute/cuda/4_2/rel/drivers/devdriver_4.2_linux _64_295.41.run wget http: //developer.download.nvidia.com/compute/cuda/4_2/rel/sdk/gpucomputingsdk_4.2.9 _linux.run chmod +x cudatoolkit_4.2.9_linux_64_ubuntu11.04.run sudo ./cudatoolkit_4.2.9_linux_64_ubuntu11.04.run echo "/usr/local/cuda/lib64" > ~/cuda.conf echo "/usr/local/cuda/lib" >> ~/cuda.conf sudo mv ~/cuda.conf /etc/ld.so.conf.d/cuda.conf sudo ldconfig echo 'export PATH=$PATH:/usr/local/cuda/bin' >> ~/.bashrc chmod +x gpucomputingsdk_4.2.9_linux.run ./gpucomputingsdk_4.2.9_linux.run sudo apt-get install build-essential libx11-dev libglu1-mesa-dev freeg lut3-dev libxi-dev libxmu-dev gcc-4.4 g++-4.4 sed 's/g++ -fPIC/g++-4.4 -fPIC/g' ~/NV IDIA_GPU_Computing_SDK/C/common/common.mk > ~/NVIDIA_GPU_Computing_SDK/C/common/common.mk.bak; mv ~/NVIDIA_GPU_Computing_SDK/C/common/common.mk.bak ~/NVIDIA_GPU_Computing_SDK/C/common/common.mk sed 's/gcc -fPIC/gcc-4.4 -fPIC/g' ~/NV IDIA_GPU_Computing_SDK/C/common/common.mk > ~/NVIDIA_GPU_Computing_SDK/C/common/common.mk.bak; mv ~/NVIDIA_GPU_Computing_SDK/C/common/common.mk.bak ~/NVIDIA_GPU_Computing_SDK/C/common/common.mk sed 's/-L$(SHAREDDIR)\/lib/-L$(SHAREDDIR)\/lib -L\/u sr\/lib\/nvidia-current/g' ~/NVIDIA_GPU_Computing_SDK/C/common/common.mk > ~/NVIDIA_GPU_Computing_SDK/C/common/common.mk.bak; mv ~/NVIDIA_GPU_Computing_SDK/C/common/common.mk.bak ~/NVIDIA_GPU_Computing_SDK/C/common/common.mk sed 's/-L$(SHAREDDIR)\/lib -L\/usr\/lib\/nvidia-current $(NV CUVIDLIB)/-L$(SHAREDDIR)\/lib $(NVCUVIDLIB)/g' ~/NVIDIA_GPU_Computing_SDK/C/common/common.mk > ~/NVIDIA_GPU_Computing_SDK/C/common/common.mk.bak; mv ~/NVIDIA_GPU_Computing_SDK/C/common/common.mk.bak ~/NVIDIA_GPU_Computing_SDK/C/common/common.mk After I run ~/NVIDIA_GPU_Computing_SDK/C/bin/linux/release/./fluidsGL It got stuck even mouse or keyboard couldn't move. How to solve it? Thank you~

  Read the article

• Question About mk-table-checksum Results

  - by stevenmusumeche

  Hello, I have 1 master and 2 slaves. I am using MySQL 5.1.42 on all servers. I am attempting to use mk-table-checksum to verify that their data is in sync, but I am getting unexpected results on one of the slaves. First, I generate the checksums on the master like this: mk-table-checksum h=localhost --databases MYDB --tables {$table_list} --replicate=MYDB.mk_checksum --chunk-size=10M My understanding is that this runs the checksum queries on the master which then propagate via normal replication to the slaves. So, no locking is needed because the slaves will be at the same logical point in time when they run the checksum queries on themselves. Is this correct? Next, to verify that the checksums match, I run this on the master: mk-table-checksum --databases MYDB --replicate=IRC.mk_checksum --replicate-check 1 h=localhost,u=maatkit,p=xxxx If there are any differences, I repair the slaves like this: mk-table-sync --execute --verbose --replicate IRC.mk_checksum h=localhost,u=maatkit,p=xxxx After doing all of this, I repaired both slaves with mk-table-sync. However, everytime I run this sequence (after everything has already been repaired), one slave is perfectly in sync but one slave always has a few tables out of sync. I am 99.999% sure that the data on the slaves matches, since I repaired everything and the tables were not even updated on the master between runs of the checksum script. What would cause a few tables to always show out of sync on only one of the slaves? I am stuck. Here is the output: Differences on h=x.x.x.x,p=...,u=maatkit DB TBL CHUNK CNT_DIFF CRC_DIFF BOUNDARIES IRC product 10 0 1 product_id = 147377 AND product_id < 162085 IRC post_order_survey 0 0 1 1=1 IRC mk_heartbeat 0 0 1 1=1 IRC mailing_list 0 0 1 1=1 IRC honey_pot_log 0 0 1 1=1 IRC product 12 0 1 product_id = 176793 AND product_id < 191501 IRC product 18 0 1 product_id = 265041 IRC orders 26 0 1 order_id = 694472 IRC orders_product 6 0 1 op_id = 935375

  Read the article

• A few tables are still out of sync after running mk-table-sync

  - by smusumeche

  I have 1 master and 2 slaves. I am using MySQL 5.1.42 on all servers. I am attempting to use mk-table-checksum to verify that their data is in sync, but I am getting unexpected results on one of the slaves. First, I generate the checksums on the master like this: mk-table-checksum h=localhost --databases MYDB --tables {$table_list} --replicate=MYDB.mk_checksum --chunk-size=10M My understanding is that this runs the checksum queries on the master which then propagate via normal replication to the slaves. So, no locking is needed because the slaves will be at the same logical point in time when they run the checksum queries on themselves. Is this correct? Next, to verify that the checksums match, I run this on the master: mk-table-checksum --databases MYDB --replicate=IRC.mk_checksum --replicate-check 1 h=localhost,u=maatkit,p=xxxx If there are any differences, I repair the slaves like this: mk-table-sync --execute --verbose --replicate IRC.mk_checksum h=localhost,u=maatkit,p=xxxx After doing all of this, I repaired both slaves with mk-table-sync. However, everytime I run this sequence (after everything has already been repaired), one slave is perfectly in sync but one slave always has a few tables out of sync. I am 99.999% sure that the data on the slaves matches, since I repaired everything and the tables were not even updated on the master between runs of the checksum script. What would cause a few tables to always show out of sync on only one of the slaves? I am stuck. Here is the output: Differences on h=x.x.x.x,p=...,u=maatkit DB TBL CHUNK CNT_DIFF CRC_DIFF BOUNDARIES IRC product 10 0 1 product_id = 147377 AND product_id < 162085 IRC post_order_survey 0 0 1 1=1 IRC mk_heartbeat 0 0 1 1=1 IRC mailing_list 0 0 1 1=1 IRC honey_pot_log 0 0 1 1=1 IRC product 12 0 1 product_id = 176793 AND product_id < 191501 IRC product 18 0 1 product_id = 265041 IRC orders 26 0 1 order_id = 694472 IRC orders_product 6 0 1 op_id = 935375

  Read the article

• Speaking at MK Code Camp 2012

  - by hajan

  This year same as the previous one, Macedonian .NET User Group is organizing the biggest event for developers and coders, event that is focusing on Microsoft technologies, Macedonian CODE CAMP 2012! The Code Camp 2012 will be held at 24th of November at FON University. In the first few hours we have more than 500 registered attendees and the number is increasing rapidly! At this year’s Code Camp, I will be speaking on topic “Modern Web Development Principles”, an interesting topic that will focus mainly on updating all the developer with the latest development trends. Here is the whole session description: “Through lot of code and demonstrations, this presentation aims to update you with the latest web development trends by clearly showing what has changed in web development today comparing with the previous years, what are the newest trends and how you can leverage the Microsoft ASP.NET platform together with all client-side centric development libraries to build the next generation of web apps following the standards and the modern web development principles. This is session for everyone who is involved into Web development in this way or another!” Quick links for those who want to learn more about this event: Code Camp 2012 Sessions (25 Sessions) Code Camp 2012 Speakers (More than 25 Speakers, 5 Microsoft MVPs, 1 MSFT, Many known Experts) Registration Link If you are somewhere around and interested to join the event, you are welcome! Hajan

  Read the article

• Upgrading PHP on MacOSX without config_vars.mk ?

  - by Ken

  Hi everyone, I want to upgrade my php version running on MAMP to 5.3. I've copied the ./configure statement from phpinfo() and downloaded the 5.3 branch source i wish to compile. However, when i try to compile it i get an error about a missing config_vars.mk file from apxs. How can i solve this issue if i do not have the config_vars.mk? can one be deprecated? can i copy the one from the stock apache that comes installed on OS X (SL)? What will happen if i remove --with-apxs from the configure line? Thanks in advance for any help. It is greatly appreciated. Ken.

  Read the article

• Android.mk - How to assemble and link ARM assembler files

  - by Kim

  Hi, I have some *.cpp source files and some *.s ARM assembler files I want to assemble and link in my Android.mk file (by running ndk-build script). My Android.mk file looks like this: LOCAL_PATH:= $(call my-dir) include $(CLEAR_VARS) LOCAL_ARM_MODE := arm LOCAL_MODULE := libTestJNI LOCAL_SRC_FILES := Test.cpp TestAS_gas4.s LOCAL_CFLAGS := -DHAVE_CONFIG_H -DFPM_ARM -ffast-math -O3 -DOPT_ARM LOCAL_LDLIBS += -llog include $(BUILD_SHARED_LIBRARY) Unfortunately the .s file is not recognized. ndk-build says: Gdbserver : [arm-linux-androideabi-4.4.3] libs/armeabi/gdbserver Gdbsetup : libs/armeabi/gdb.setup make: ** No rule to make target /cygdrive/c/projects/TestAS_gas4.s', needed by/cygdrive/c/projects/obj/local/armeabi/objs-debug/libTestJNI/TestAS_gas4.o'. Stop. In a "normal" makefile I would have to assemble by using "as" in a rule. How is it done in the Android.mk files? /Kim

  Read the article

• Peer review maatkits mk-parallel-dump and mk-parallel-restore usage?

  - by Brent

  Hiya Im trying to make use of maatkit as a means of dumping a database and then restoring to another database. For dumps: mk-parallel-dump --user abc --password xyz --databases $db --base-dir /tmp/dump For restore: mk-parallel-restore --create-databases --user abc --password xyz --database devdb /tmp/dump My question is, is my logic and understanding correct, and would it be ok to do it like this. Kind Regards Brent

  Read the article

• include an APK in Android.mk

  - by ayden

  I'm writing a Android.mk to make a APK-A. and APK-A would use other classes defined in APK-B. I wonder that how should I wrote the Android.mk to include APK-B. Which tag should I use? Thanks.

  Read the article

• PHP Error / Mk-livestatus in Nagvis

  - by tod

  I have Nagios and Nagvis installed via Debian packages, but when I run Nagvis and try to get into the "General Configuration" menu I get this error Error: (0) Array to string conversion (/usr/share/nagvis/share/server/core/classes/WuiViewEditMainCfg.php:126) #0 /usr/share/nagvis/share/server/core/classes/WuiViewEditMainCfg.php(126): nagvisExceptionErrorHandler(8, 'Array to string...', '/usr/share/nagv...', 126, Array) #1 /usr/share/nagvis/share/server/core/classes/WuiViewEditMainCfg.php(44): WuiViewEditMainCfg->getFields() #2 /usr/share/nagvis/share/server/core/classes/CoreModMainCfg.php(56): WuiViewEditMainCfg->parse() #3 /usr/share/nagvis/share/server/core/functions/index.php(120): CoreModMainCfg->handleAction() #4 /usr/share/nagvis/share/server/core/ajax_handler.php(63): require('/usr/share/nagv...') #5 {main} I'm also having an issue with backends in Nagvis. check-mk-livestatus is installed, but I get this error when hovering over items: Problem (backend: live_1): Unable to connect to the /var/lib/nagios3/rw/live in backend live_1: Connection refused Or when trying to add things: Unable to fetch data from backend - falling back to input field. /var/lib/nagios3/rw/ exists, but there is no "live" file. I'm really not sure what is going on, especially since these were all Debian packages... Here is the most relevant part of the nagvis.ini.php: ; ---------------------------- ; Backend definitions ; ---------------------------- ; Example definition of a livestatus backend. ; In this case the backend_id is live_1 ; The path /usr/local/nagios/var/rw has to exist [backend_live_1] backendtype="mklivestatus" ; The status host can be used to prevent annoying timeouts when a backend is not ; reachable. This is only useful in multi backend setups. ; ; It works as follows: The assumption is that there is a "local" backend which ; monitors the host of the "remote" backend. When the remote backend host is ; reported as UP the backend is queried as normal. ; When the remote backend host is reported as "DOWN" or "UNREACHABLE" NagVis won't ; try to connect to the backend anymore until the backend host gets available again. ; ; The statushost needs to be given in the following format: ; "<backend_id>:<hostname>" -> e.g. "live_2:nagios" ;statushost="" socket="unix:/var/lib/nagios3/rw/live" There is nothing relating to 'backends' or 'mklivestatus' in /var/log/nagios3/nagios.log Any help would be much appreciated

  Read the article

• How to write Android.mk for library using Gnu makefile

  - by Walidix

  I want to make an Android application using native libraries which use the Gnu build tools (gnu makefile). My question is how to write the "Android.mk" files for these libraries in order to build them using the Android build system or the Android NDK. Thanks in advance

  Read the article

• Adding a external jar reference in Android.mk

  - by Karan

  I want to add a external third party jar file in the inbuilt android app. I've added the LOCAL_CLASSPATH variable in Android.mk due to which the compilation goes fine. But during runtime, it is not able to find the class definiation which is in the JAR. Which is the variable I need to set to add the third party JARs in the .dex/.apk ? TIA.

  Read the article

• Exporting makefile from Eclipse CDT

  - by Alex Farber

  I have C++ project in the Ubuntu OS, Eclipse CDT. My final goal is to build the project binaries for FreeBSD OS. The first test. I create simple C++ CDT project with main.cpp file: cout << "OK" << endl; and build it. Then I open Terminal window in Release directory: alex@alex-linux:~/workspace/HelloWorld/Release$ ls HelloWorld main.d main.o makefile objects.mk sources.mk subdir.mk alex@alex-linux:~/workspace/HelloWorld/Release$ rm HelloWorld main.d main.o alex@alex-linux:~/workspace/HelloWorld/Release$ ls makefile objects.mk sources.mk subdir.mk alex@alex-linux:~/workspace/HelloWorld/Release$ make Building file: ../main.cpp Invoking: GCC C++ Compiler g++ -O3 -Wall -c -fmessage-length=0 -MMD -MP -MF"main.d" -MT"main.d" -o"main.o" "../main.cpp" Finished building: ../main.cpp Building target: HelloWorld Invoking: GCC C++ Linker g++ -o"HelloWorld" ./main.o Finished building target: HelloWorld alex@alex-linux:~/workspace/HelloWorld/Release$ ./HelloWorld OK alex@alex-linux:~/workspace/HelloWorld/Release$ So far, so good. Now I copy the whole project tree to FreeBSD and trying to build it: $ cd /home/alex/project $ ls main.cpp release $ cd release $ ls makefile objects.mk sources.mk subdir.mk $ make "makefile", line 5: Need an operator "makefile", line 10: Need an operator "makefile", line 11: Need an operator "makefile", line 12: Need an operator CDT-generated makefile doesn't work. This is makefile beginning: $ Automatically-generated file. Do not edit! -include ../makefile.init RM := rm -rf $ All of the sources participating in the build are defined here -include sources.mk -include subdir.mk -include objects.mk ... Line 5 is -include ../makefile.init. Really, there is no such file. But it works by some way on Ubuntu computer. What is the trick, how can I build this? BTW, manually written makefile works: all: g++ -O0 -g3 -Wall -c -fmessage-length=0 -MMD -MP -MF"main.d" -MT"main.d" -o"main.o" "../main.cpp" g++ -o"HelloWorld" ./main.o Note: $ in makefile is actually #, I replaced it because # creates formatting problems inside of stackoverflow pre block.

  Read the article

• check_mk IPMI PCM sensor reading randomly fails

  - by Julian Kessel

  I use check_mk_agent for monitoring a server with IPMI and the freeipmi-tools installed. As far as I can see, the monitoring randomly detects no value returned by the IPMI Sensor "Temperature_PCH_Temp". That's a problem since it results in a CRITICAL state triggering a notification. The interruption lasts only over one check, the following is always OK. The temperature is in no edge area and neither the readings before the fail nor after show a Temp that is tending to overrun a treshold. Has someone an idea on what could be the reason for this behaviour and how prevent it?

  Read the article

• Not all events appear in Nagios history (archive)

  - by Lars

  in the "Host & Service history" of my check_mk interface I can see various events, but a lot of events are missing. On the default interface at "View Alert History For This Service" or in the logfiles /var/log/nagios/archives/*.log the same issue: I can see many events of the last days, but not all of them. In the /etc/nagios/nagios.cfg the options log_event_handlers, log_initial_status and log_passive_checks are set to 0, the other log_... options are set to 1. I don't think that any of these options causing the problem that not all events are logged. What could cause this problem?

  Read the article

• nagios contact groups to check_mk

  - by Skiaddict

  I have Nagios installed with traditional configuration files. I have created some contact groups and assigned them to hosts. For web UI I'm using check_mk. And here's the question: Check_mk supports showing hosts/services based on contact group membership. But I can't use the Nagios contact groups in check_mk. (Result should be that if person XYZ is logged in, he see only hosts and services assigned to him.) My users are in LDAP (I'm using check_mk login form, not apache authorisation). I can't find any information about this in documentation so if someone have experience, please tell me how this works. The problem is that I cannot let everybody be admin and receive all alerts...

  Read the article

• Simple neon optimization in Android

  - by Peter

  In my Android application, I use a bunch of open source libraries such as libyuv, libvpx, libcrypto, libssl, etc. Some of them come with Android.mk. For others, I hand-crafted Android.mk. The code is built only for arm for now. Here is my Application.mk: APP_ABI := armeabi-v7a APP_OPTIM := release APP_STL := gnustl_static APP_CPPFLAGS := -frtti I am looking for way to generate binaries that are optimized for neon. Browsing the net, I found the following setting that someone is using in his Android.mk: LOCAL_CFLAGS += -mfloat-abi=softfp -mfpu=neon -march=armv7 I wonder if I simply put this setting in Application.mk, will it automatically get applied across all the libraries? A step before each library is built is the following: include $(CLEAR_VARS) Is it better to include LOCAL_CFLAGS directive after this line (instead of including it in Application.mk)? Finally, why doesn't ndk-build automatically optimize for neon when it sees armabi in Application.mk? Regards.

  Read the article

• how to set BUILD_MAC_SDK_EXPERIMENTAL=1 on Mac 10.7?

  - by Nguyen Minh Binh

  I am building Android OS source on Mac 10.7 follow instructions at: http://source.android.com/source/building.html. Below are the error code when I try to run lunch full-eng BinhNguyens-MacBook:WORKING_DIRECTORY CuongLy$ lunch full-eng 2012-10-04 14:02:58.544 xcodebuild[645:80b] XcodeColors: load (v10.1) 2012-10-04 14:02:58.560 xcodebuild[645:80b] XcodeColors: pluginDidLoad: build/core/combo/HOST_darwin-x86.mk:62: ***************************** build/core/combo/HOST_darwin-x86.mk:63: * Can not find SDK 10.6 at /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.6.sdk build/core/combo/HOST_darwin-x86.mk:65: * If you wish to build using higher version of SDK, build/core/combo/HOST_darwin-x86.mk:66: * try setting BUILD_MAC_SDK_EXPERIMENTAL=1 before build/core/combo/HOST_darwin-x86.mk:67: * rerunning this command build/core/combo/HOST_darwin-x86.mk:69: ***************************** build/core/combo/HOST_darwin-x86.mk:70: * Stop.. Stop. Please tell me how to set BUILD_MAC_SDK_EXPERIMENTAL=1 ?

  Read the article

• Compiling OpenCV in Android NDK

  - by evident

  PLEASE SEE THE ADDITIONS AT THE BOTTOM! The first problem is solved in Linux, not under Windows and Cygwin yet, but there is a new problem. Please see below! I am currently trying to compile OpenCV for Android NDK so that I can use it in my apps. For this I tried to follow this guide: http://www.stanford.edu/~zxwang/android_opencv.html But when compiling the downloaded stuff with ndk-build I get this error: $ /cygdrive/u/flori/workspace/android-ndk-r5b/ndk-build Compile++ thumb : opencv <= cvjni.cpp Compile++ thumb : cxcore <= cxalloc.cpp Compile++ thumb : cxcore <= cxarithm.cpp Compile++ thumb : cxcore <= cxarray.cpp Compile++ thumb : cxcore <= cxcmp.cpp Compile++ thumb : cxcore <= cxconvert.cpp Compile++ thumb : cxcore <= cxcopy.cpp Compile++ thumb : cxcore <= cxdatastructs.cpp Compile++ thumb : cxcore <= cxdrawing.cpp Compile++ thumb : cxcore <= cxdxt.cpp Compile++ thumb : cxcore <= cxerror.cpp Compile++ thumb : cxcore <= cximage.cpp Compile++ thumb : cxcore <= cxjacobieigens.cpp Compile++ thumb : cxcore <= cxlogic.cpp Compile++ thumb : cxcore <= cxlut.cpp Compile++ thumb : cxcore <= cxmathfuncs.cpp Compile++ thumb : cxcore <= cxmatmul.cpp Compile++ thumb : cxcore <= cxmatrix.cpp Compile++ thumb : cxcore <= cxmean.cpp Compile++ thumb : cxcore <= cxmeansdv.cpp Compile++ thumb : cxcore <= cxminmaxloc.cpp Compile++ thumb : cxcore <= cxnorm.cpp Compile++ thumb : cxcore <= cxouttext.cpp Compile++ thumb : cxcore <= cxpersistence.cpp Compile++ thumb : cxcore <= cxprecomp.cpp Compile++ thumb : cxcore <= cxrand.cpp Compile++ thumb : cxcore <= cxsumpixels.cpp Compile++ thumb : cxcore <= cxsvd.cpp Compile++ thumb : cxcore <= cxswitcher.cpp Compile++ thumb : cxcore <= cxtables.cpp Compile++ thumb : cxcore <= cxutils.cpp StaticLibrary : libstdc++.a StaticLibrary : libcxcore.a Compile++ thumb : cv <= cvaccum.cpp Compile++ thumb : cv <= cvadapthresh.cpp Compile++ thumb : cv <= cvapprox.cpp Compile++ thumb : cv <= cvcalccontrasthistogram.cpp Compile++ thumb : cv <= cvcalcimagehomography.cpp Compile++ thumb : cv <= cvcalibinit.cpp Compile++ thumb : cv <= cvcalibration.cpp Compile++ thumb : cv <= cvcamshift.cpp Compile++ thumb : cv <= cvcanny.cpp Compile++ thumb : cv <= cvcolor.cpp Compile++ thumb : cv <= cvcondens.cpp Compile++ thumb : cv <= cvcontours.cpp Compile++ thumb : cv <= cvcontourtree.cpp Compile++ thumb : cv <= cvconvhull.cpp Compile++ thumb : cv <= cvcorner.cpp Compile++ thumb : cv <= cvcornersubpix.cpp Compile++ thumb : cv <= cvderiv.cpp Compile++ thumb : cv <= cvdistransform.cpp Compile++ thumb : cv <= cvdominants.cpp Compile++ thumb : cv <= cvemd.cpp Compile++ thumb : cv <= cvfeatureselect.cpp Compile++ thumb : cv <= cvfilter.cpp Compile++ thumb : cv <= cvfloodfill.cpp Compile++ thumb : cv <= cvfundam.cpp Compile++ thumb : cv <= cvgeometry.cpp Compile++ thumb : cv <= cvhaar.cpp Compile++ thumb : cv <= cvhistogram.cpp Compile++ thumb : cv <= cvhough.cpp Compile++ thumb : cv <= cvimgwarp.cpp Compile++ thumb : cv <= cvinpaint.cpp Compile++ thumb : cv <= cvkalman.cpp Compile++ thumb : cv <= cvlinefit.cpp Compile++ thumb : cv <= cvlkpyramid.cpp Compile++ thumb : cv <= cvmatchcontours.cpp Compile++ thumb : cv <= cvmoments.cpp Compile++ thumb : cv <= cvmorph.cpp Compile++ thumb : cv <= cvmotempl.cpp Compile++ thumb : cv <= cvoptflowbm.cpp Compile++ thumb : cv <= cvoptflowhs.cpp Compile++ thumb : cv <= cvoptflowlk.cpp Compile++ thumb : cv <= cvpgh.cpp Compile++ thumb : cv <= cvposit.cpp Compile++ thumb : cv <= cvprecomp.cpp Compile++ thumb : cv <= cvpyramids.cpp Compile++ thumb : cv <= cvpyrsegmentation.cpp Compile++ thumb : cv <= cvrotcalipers.cpp Compile++ thumb : cv <= cvsamplers.cpp Compile++ thumb : cv <= cvsegmentation.cpp Compile++ thumb : cv <= cvshapedescr.cpp Compile++ thumb : cv <= cvsmooth.cpp Compile++ thumb : cv <= cvsnakes.cpp Compile++ thumb : cv <= cvstereobm.cpp Compile++ thumb : cv <= cvstereogc.cpp Compile++ thumb : cv <= cvsubdivision2d.cpp Compile++ thumb : cv <= cvsumpixels.cpp Compile++ thumb : cv <= cvsurf.cpp Compile++ thumb : cv <= cvswitcher.cpp Compile++ thumb : cv <= cvtables.cpp Compile++ thumb : cv <= cvtemplmatch.cpp Compile++ thumb : cv <= cvthresh.cpp Compile++ thumb : cv <= cvundistort.cpp Compile++ thumb : cv <= cvutils.cpp StaticLibrary : libcv.a SharedLibrary : libopencv.so U:/flori/workspace/android-ndk-r5b/toolchains/arm-linux-androideabi-4.4.3/prebui lt/windows/bin/../lib/gcc/arm-linux-androideabi/4.4.3/../../../../arm-linux-andr oideabi/bin/ld.exe: cannot find -lcxcore collect2: ld returned 1 exit status make: *** [/cygdrive/u/flori/workspace/android/testOpenCV/obj/local/armeabi/libo pencv.so] Error 1 I am trying to compile it on a Windows system and with the newest NDK version... Does anybody have an idea what this linking error means and what I can to to have it work again? Would be great if anybody could help After getting the problem to work I found that there is another way of compiling OpenCV for Android, using the current version of OpenCV (instead of the 1.1 one from above) and the modified Android NDK from crystax, which supports STL and exceptions and therefore supports the newest OpenCV Version. All information on that can be found here: http://opencv.willowgarage.com/wiki/Android There it says to download the current svn trunk and the crystax-r4 android-ndk, as well as swig, which I did. I entered the folder, created the build directory, ran cmake and then built the static libs, which seemed to work. At least it successfully ran the make-command without errors. I now wanted to build the shared libraries so I entered the android-jni folder and ran 'make' again, but got this error: % make -j4 OPENCV_CONFIG = ../build/android-opencv.mk make clean-swig &&\ mkdir -p jni/gen &&\ mkdir -p src/com/opencv/jni &&\ swig -java -c++ -package "com.opencv.jni" \ -outdir src/com/opencv/jni \ -o jni/gen/android_cv_wrap.cpp jni/android-cv.i OPENCV_CONFIG = ../build/android-opencv.mk make[1]: Entering directory `/home/florian/android-opencv-willowgarage/android/android-jni' make[1]: warning: jobserver unavailable: using -j1. Add `+' to parent make rule. rm -f jni/gen/android_cv_wrap.cpp make[1]: Leaving directory `/home/florian/android-opencv-willowgarage/android/android-jni' /home/florian/android-ndk-r4-crystax/ndk-build OPENCV_CONFIG=../build/android-opencv.mk \ PROJECT_PATH= ARM_TARGETS="armeabi armeabi-v7a" V= /home/florian/android-ndk-r4-crystax/ndk-build OPENCV_CONFIG=../build/android-opencv.mk \ PROJECT_PATH= ARM_TARGETS="armeabi armeabi-v7a" V= make[1]: Entering directory `/home/florian/android-opencv-willowgarage/android/android-jni' /home/florian/android-opencv-willowgarage/android/android-jni/jni/Android.mk:10: ../build/android-opencv.mk: No such file or directory make[1]: Entering directory `/home/florian/android-opencv-willowgarage/android/android-jni' /home/florian/android-opencv-willowgarage/android/android-jni/jni/Android.mk:10: ../build/android-opencv.mk: No such file or directory /home/florian/android-opencv-willowgarage/android/android-jni/jni/Android.mk:10: ../build/android-opencv.mk: No such file or directory make[1]: warning: jobserver unavailable: using -j1. Add `+' to parent make rule. /home/florian/android-opencv-willowgarage/android/android-jni/jni/Android.mk:10: ../build/android-opencv.mk: No such file or directory make[1]: *** No rule to make target `../build/android-opencv.mk'. Stop. make[1]: Leaving directory `/home/florian/android-opencv-willowgarage/android/android-jni' make: *** [libs/armeabi/libandroid-opencv.so] Error 2 make: *** Waiting for unfinished jobs.... make[1]: warning: jobserver unavailable: using -j1. Add `+' to parent make rule. make[1]: *** No rule to make target `../build/android-opencv.mk'. Stop. make[1]: Leaving directory `/home/florian/android-opencv-willowgarage/android/android-jni' make: *** [libs/armeabi-v7a/libandroid-opencv.so] Error 2 Does anybody have an idea what this means and what I can do to build the shared libraries? ... Ok after having a look at the error message it came to me that it seems to have something missing in the build directory... but there wasn't even a build directory in the android folder so I created one, ran 'cmake' in there and 'make' again but get this error: Compile thumb : opencv_lapack <= /home/florian/android-opencv-willowgarage/3rdparty/lapack/sgetrf.c Compile thumb : opencv_lapack <= /home/florian/android-opencv-willowgarage/3rdparty/lapack/scopy.c Compile++ thumb: opencv_core <= /home/florian/android-opencv-willowgarage/modules/core/src/matrix.cpp cc1plus: error: /home/florian/android-opencv-willowgarage/android/../modules/index.rst/include: Not a directory make[3]: *** [/home/florian/android-opencv-willowgarage/android/build/obj/local/armeabi/objs/opencv_core/src/matrix.o] Error 1 make[3]: *** Waiting for unfinished jobs.... make[2]: *** [android-opencv] Error 2 make[1]: *** [CMakeFiles/ndk.dir/all] Error 2 make: *** [all] Error 2 Anybody know what this means?

  Read the article

• How to get visual studio 10 to open .mk files in the same instance?

  - by Russ Schultz

  I've recently been migrated to windows 7, and upon re-installing VS2010, it seems to want to treat .mk files differently than it used to. For whatever reason, it insists on opening a new instance of visual studio to edit these files. It doesn't for .c, .h, etc. I've tried using types, a freeware association manager, to change how it is associated. I've deleted the association, recreated, etc. but it still seems to want to treat these separately. Anybody know how to beat this thing into submission?

  Read the article

• android compilation

  - by user1241903

  I am trying to compile android source v2.3.4. When I give "make -j32", I am getting result like this.I am using fedora 14(32 bit). [root@localhost WORKING_DIRECTORY]# make -j32 ============================================ PLATFORM_VERSION_CODENAME=REL PLATFORM_VERSION=2.3.4 TARGET_PRODUCT=full TARGET_BUILD_VARIANT=eng TARGET_SIMULATOR=false TARGET_BUILD_TYPE=release TARGET_BUILD_APPS= TARGET_ARCH=arm HOST_ARCH=x86 HOST_OS=linux HOST_BUILD_TYPE=release BUILD_ID=GRJ22 ============================================ Checking build tools versions... build/core/main.mk:76: ************************************************************ build/core/main.mk:77: You are attempting to build on a 32-bit system. build/core/main.mk:78: Only 64-bit build environments are supported beyond froyo/2.2. build/core/main.mk:79: ************************************************************ build/core/main.mk:80: *** stop. Stop. [root@localhost WORKING_DIRECTORY]# Please help me to solve this issue. How to compile android source code on 32 bit os?. Thank You Rajendra

  Read the article

• Configure PERL DBI and DBD in Linux

  - by Balualways

  I am new to Perl and I work in a Linux OEL 5x server. I am trying to configure the Perl DB modules for Oracle connectivity (DBD and DBI modules). Can anyone help me out in the installation procedure? I had tried CPAN didn't really worked out. Any help would be appreciated. I am not quite sure I need to initialize any variables other than $LD_LIBRARY_PATH and $ORACLE_HOME These are my observations: ISSUE:: I am getting the following issue while using the DBI module to connect to Oracle: install_driver(Oracle) failed: Can't locate loadable object for module DBD::Oracle in @INC (@INC contains: /usr/lib64/perl5/site_perl/5.8.8/x86_64-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl /usr/lib64/perl5/vendor_perl/5.8.8/x86_64-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl /usr/lib64/perl5/5.8.8/x86_64-linux-thread-multi /usr/lib/perl5/5.8.8 .) at (eval 3) line 3 Compilation failed in require at (eval 3) line 3. Perhaps a module that DBD::Oracle requires hasn't been fully installed at connectdb.pl line 57 I had installed the DBD for oracle from /usr/lib64/perl5/5.8.8/x86_64-linux-thread-multi/DBD/DBD-Oracle-1.50 Could you please take a look into the steps and correct me if I am wrong: Observations: $ echo $LD_LIBRARY_PATH /opt/CA/UnicenterAutoSysJM/autosys/lib:/opt/CA/SharedComponents/Csam/SockAdapter/lib:/opt/CA/SharedComponents/ETPKI/lib:/opt/CA/CAlib $ echo $ORACLE_HOME /usr/local/oracle/ORA This is how I tried to install the DBD module: Download the file DBD 1.50 for Oracle Copy to /usr/lib64/perl5/5.8.8/x86_64-linux-thread-multi/DBD Untar and Makefile.PL . Message: Using DBI 1.52 (for perl 5.008008 on x86_64-linux-thread-multi) installed in /usr/lib64/perl5/vendor_perl/5.8.8/x86_64-linux-thread-multi/auto/DBI/ Configuring DBD::Oracle for perl 5.008008 on linux (x86_64-linux-thread-multi) Remember to actually *READ* the README file! Especially if you have any problems. Installing on a linux, Ver#2.6 Using Oracle in /opt/oracle/product/10.2 DEFINE _SQLPLUS_RELEASE = "1002000400" (CHAR) Oracle version 10.2.0.4 (10.2) Found /opt/oracle/product/10.2/rdbms/demo/demo_rdbms.mk Found /opt/oracle/product/10.2/rdbms/demo/demo_rdbms64.mk Found /opt/oracle/product/10.2/rdbms/lib/ins_rdbms.mk Using /opt/oracle/product/10.2/rdbms/demo/demo_rdbms.mk Your LD_LIBRARY_PATH env var is set to '/usr/local/oracle/ORA/lib:/usr/dt/lib:/usr/openwin/lib:/usr/local/oracle/ORA/ows/cartx/wodbc/1.0/util/lib:/usr/local/oracle/ORA/lib:/usr/local/sybase/OCS-12_0/lib:/usr/local/sybase/lib:/home/oracle/jdbc/jdbcoci73/lib:./' WARNING: Your LD_LIBRARY_PATH env var doesn't include '/opt/oracle/product/10.2/lib' but probably needs to. Reading /opt/oracle/product/10.2/rdbms/demo/demo_rdbms.mk Reading /usr/local/oracle/ORA/rdbms/lib/env_rdbms.mk Attempting to discover Oracle OCI build rules sh: make: command not found by executing: [make -f /opt/oracle/product/10.2/rdbms/demo/demo_rdbms.mk build ECHODO=echo ECHO=echo GENCLNTSH='echo genclntsh' CC=true OPTIMIZE= CCFLAGS= EXE=DBD_ORA_EXE OBJS=DBD_ORA_OBJ.o] WARNING: Oracle build rule discovery failed (32512) Add path to make command into your PATH environment variable. Oracle oci build prolog: [sh: make: command not found] Oracle oci build command: [] WARNING: Unable to interpret Oracle build commands from /opt/oracle/product/10.2/rdbms/demo/demo_rdbms.mk. (Will continue by using fallback approach.) Please report this to [email protected]. See README for what to include. Found header files in /opt/oracle/product/10.2/rdbms/public. client_version=10.2 DEFINE= -Wall -Wno-comment -DUTF8_SUPPORT -DORA_OCI_VERSION=\"10.2.0.4\" -DORA_OCI_102 Checking for functioning wait.ph System: perl5.008008 linux ca-build9.us.oracle.com 2.6.20-1.3002.fc6xen #1 smp thu apr 30 18:08:39 pdt 2009 x86_64 x86_64 x86_64 gnulinux Compiler: gcc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm Linker: not found Sysliblist: -ldl -lm -lpthread -lnsl -lirc Oracle makefiles would have used these definitions but we override them: CC: cc CFLAGS: $(GFLAG) $(OPTIMIZE) $(CDEBUG) $(CCFLAGS) $(PFLAGS)\ $(SHARED_CFLAG) $(USRFLAGS) [$(GFLAG) -O3 $(CDEBUG) -m32 $(TRIGRAPHS_CCFLAGS) -fPIC -I/usr/local/oracle/ORA/rdbms/demo -I/usr/local/oracle/ORA/rdbms/public -I/usr/local/oracle/ORA/plsql/public -I/usr/local/oracle/ORA/network/public -DLINUX -D_GNU_SOURCE -D_LARGEFILE64_SOURCE=1 -D_LARGEFILE_SOURCE=1 -DSLTS_ENABLE -DSLMXMX_ENABLE -D_REENTRANT -DNS_THREADS -fno-strict-aliasing $(LPFLAGS) $(USRFLAGS)] build: $(CC) $(ORALIBPATH) -o $(EXE) $(OBJS) $(OCISHAREDLIBS) [ cc -L$(LIBHOME) -L/usr/local/oracle/ORA/rdbms/lib/ -o $(EXE) $(OBJS) -lclntsh $(EXPDLIBS) $(EXOSLIBS) -ldl -lm -lpthread -lnsl -lirc -ldl -lm $(USRLIBS) -lpthread] LDFLAGS: $(LDFLAGS32) [-m32 -o $@ -L/usr/local/oracle/ORA/rdbms//lib32/ -L/usr/local/oracle/ORA/lib32/ -L/usr/local/oracle/ORA/lib32/stubs/] Linking with /usr/local/oracle/ORA/rdbms/lib/defopt.o -lclntsh -ldl -lm -lpthread -lnsl -lirc -ldl -lm -lpthread [from $(DEF_OPT) $(OCISHAREDLIBS)] Checking if your kit is complete... Looks good LD_RUN_PATH=/usr/local/oracle/ORA/lib Using DBD::Oracle 1.50. Using DBD::Oracle 1.50. Using DBI 1.52 (for perl 5.008008 on x86_64-linux-thread-multi) installed in /usr/lib64/perl5/vendor_perl/5.8.8/x86_64-linux-thread-multi/auto/DBI/ Writing Makefile for DBD::Oracle Writing MYMETA.yml and MYMETA.json *** If you have problems... read all the log printed above, and the README and README.help.txt files. (Of course, you have read README by now anyway, haven't you?)

  Read the article

• Android ndk-build command does nothing

  - by James

  I have a similar question to that posted here: Android NDK: why ndk-build doesn't generate .so file and a new libs folder in Eclipse? ...though I am running Windows 7, not Mac os. Essentially the ndk-build command is run, gives no error but doesn't create an .so file (also, since I'm on windows this should create a .dll and not an .so?). I tried running the command from the root, jni, src folders etc. but got the same result; cmd just returns to the prompter after a few seconds. I ran it again from the jni folder with NDK_LOG=1 parameter to see what was happening. Here is a portion of the transcript of the log results after running ndk-build in the jni folder (after it successfully identified the platform, etc.)... Android NDK: Looking for jni/Android.mk in /workspace/NdkFooActivity/jni Android NDK: Looking for jni/Android.mk in /workspace/NdkFooActivity Android NDK: Found it ! Android NDK: Found project path: /workspace/NdkFooActivity Android NDK: Ouput path: /workspace/NdkFooActivity/obj Android NDK: Parsing /cygdrive/c/android-ndk-r8/build/core/default-application.mk Android NDK: Found APP_PLATFORM=android-15 in /workspace/NdkFooActivity/project.properties Android NDK: Application local targets unknown platform 'android-15' Android NDK: Switching to android-14 Android NDK: Using build script /workspace/NdkFooActivity/jni/Android.mk Android NDK: Application 'local' is not debuggable Android NDK: Selecting release optimization mode (app is not debuggable) Android NDK: Adding import directory: /cygdrive/c/android-ndk-r8/sources Android NDK: Building application 'local' for ABI 'armeabi' Android NDK: Using target toolchain 'arm-linux-androideabi-4.4.3' for 'armeabi' ABI Android NDK: Looking for imported module with tag 'cxx-stl/system' Android NDK: Probing /cygdrive/c/android-ndk-r8/sources/cxx-stl/system/Android.mk Android NDK: Found in /cygdrive/c/android-ndk-r8/sources/cxx-stl/system Android NDK: Cygwin dependency file conversion script: ...after which point it just runs the script mentioned in the last line, then terminates. Any ideas? Thanks!

  Read the article

• Very slow write performance on Debian 6.0 (AMD64) with DMCRYPT/LVM/RAID1

  - by jdelic

  I'm seeing very strange performance characteristics on one of my servers. This server is running a simple two-disk software-RAID1 setup with LVM spanning /dev/md0. One of the logical volumes /dev/vg0/secure is encrypted using dmcrypt with LUKS and mounted with the sync and noatimes flag. Writing to that volume is incredibly slow at 1.8 MB/s and the CPU usage stays near 0%. There are 8 crpyto/1-8 processes running (it's a Intel Quadcore CPU). I hope that someone on serverfault has seen this before :-(. uname -a 2.6.32-5-xen-amd64 #1 SMP Tue Mar 8 00:01:30 UTC 2011 x86_64 GNU/Linux Interestingly, when I read from the device I get good performance numbers: reading without encryption: $ dd if=/dev/vg0/secure of=/dev/null bs=64k count=100000 100000+0 records in 100000+0 records out 6553600000 bytes (6.6 GB) copied, 68.8951 s, 95.1 MB/s reading with encryption: $ dd if=/dev/mapper/secure of=/dev/null bs=64k count=100000 100000+0 records in 100000+0 records out 6553600000 bytes (6.6 GB) copied, 69.7116 s, 94.0 MB/s However, when I try to write to the device: $ dd if=/dev/zero of=./test bs=64k 8809+0 records in 8809+0 records out 577306624 bytes (577 MB) copied, 321.861 s, 1.8 MB/s Also, when I read I see CPU usage, when I write, the CPU stays at almost 0% usage. Here is output of cryptsetup luksDump: LUKS header information for /dev/vg0/secure Version: 1 Cipher name: aes Cipher mode: cbc-essiv:sha256 Hash spec: sha1 Payload offset: 2056 MK bits: 256 MK digest: dd 62 b9 a5 bf 6c ec 23 36 22 92 4c 39 f8 d6 5d c1 3a b7 37 MK salt: cc 2e b3 d9 fb e3 86 a1 bb ab eb 9d 65 df b3 dd d9 6b f4 49 de 8f 85 7d 3b 1c 90 83 5d b2 87 e2 MK iterations: 44500 UUID: a7c9af61-d9f0-4d3f-b422-dddf16250c33 Key Slot 0: ENABLED Iterations: 178282 Salt: 60 24 cb be 5c 51 9f b4 85 64 3d f8 07 22 54 d4 1a 5f 4c bc 4b 82 76 48 d8 a2 d2 6a ee 13 d7 5d Key material offset: 8 AF stripes: 4000 Key Slot 1: DISABLED Key Slot 2: DISABLED Key Slot 3: DISABLED Key Slot 4: DISABLED Key Slot 5: DISABLED Key Slot 6: DISABLED Key Slot 7: DISABLED

  Read the article

• Synchronizing Sql Server Database with Pi System Database

  - by Vinod Reddy M.K

  Hai, I'm developing a tool to synchronize SQL Server database with a Pi system (OleDb).Each time there is a change in the Pi System I need to update the values in Sql Server Database and vice-versa.Could you please provide me with the options possible and how it can be done. Thanks, M.K

  Read the article

• Error while running Quickly

  - by Sagar Mk

  Getting an error while running quickly app: ------------------------------------------------------------------------------------------- Creating project directory sata Creating bzr repository and committing Launching your newly created project! (sata:2701): GLib-GIO-ERROR **: Settings schema 'org.gnome.desktop.interface' is not installed Congrats, your new project is setup! cd /home/blacksaint/sata/ to start hacking. ------------------------------------------------------------------------------------------- Actually after this the app should pop - up but it really doesn't do so!

  Read the article

1 2 3 4 5  | Next Page >