Search Results

Search found 1167 results on 47 pages for 'modem'.

Page 1/47 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Mobile Internet Modem Olivetti Olicard 155 does not work in Ubuntu 12.10

    - by João Fracassi
    I have a problem, I bought a 3G mobile modem, but does not work in Ubuntu 12.10, also did not work on Ubuntu 12.04. I installed the USB Modeswitch and has the same flaw, does not recognize the modem within the connection manager, I connect the modem to the USB port and wait up to 20 minutes and does not recognize the modem. I ran the command recognizes the modem and lsusb as "Bus 001 Device 007: ID 0b3c: C004 Olivetti TechCenter." Does anyone have this modem, you can help me solve the problem, or does anyone have a solution? Because the manufacturer does not support Linux and according to some forums usbmodeswitch supports esste model. Olivetti Olicard modem 155.

    Read the article

  • cdc-acm driver: This device cannot do calls on its own. It is not a modem

    - by Sorcrer
    I am using Beagleboard-xm with 3.12 Kernel and ubuntu rootfs from Robert Nelson's site. I use a Telit HE910 GPS+GSM modem along with my project .So as per the HW user guide i have to apply a logic high for 5s on the input of this modem for enabling it So when I does this by toggling the gpio pin for 5s using a script I'm getting some messages on the terminal I am sure this message comes from the driver in usb/class/cdc-acm.c but couldn't find the reason behind this? How can I solve this issue?? root@arm:~# ./modem_on.sh Turning on Telit modem ...... going to sleep and toggle [ 70.791381] cdc_acm 1-2:1.0: This device cannot do calls on its own. It is not a modem. [ 74.390258] cdc_acm 1-2:1.0: This device cannot do calls on its own. It is not a modem. [ 74.406890] cdc_acm 1-2:1.2: This device cannot do calls on its own. It is not a modem. [ 74.462188] cdc_acm 1-2:1.4: This device cannot do calls on its own. It is not a modem. [ 74.478363] cdc_acm 1-2:1.6: This device cannot do calls on its own. It is not a modem. [ 74.495269] cdc_acm 1-2:1.8: This device cannot do calls on its own. It is not a modem. [ 74.510040] cdc_acm 1-2:1.10: This device cannot do calls on its own. It is not a modem. [ 74.530090] cdc_acm 1-2:1.12: This device cannot do calls on its own. It is not a modem. [ 74.619720] cdc_acm 1-2:1.0: This device cannot do calls on its own. It is not a modem. [ 74.634429] cdc_acm 1-2:1.2: This device cannot do calls on its own. It is not a modem. [ 74.649475] cdc_acm 1-2:1.4: This device cannot do calls on its own. It is not a modem. [ 74.664459] cdc_acm 1-2:1.6: This device cannot do calls on its own. It is not a modem. [ 74.678741] cdc_acm 1-2:1.8: This device cannot do calls on its own. It is not a modem. [ 74.693389] cdc_acm 1-2:1.10: This device cannot do calls on its own. It is not a modem. [ 74.708099] cdc_acm 1-2:1.12: This device cannot do calls on its own. It is not a modem. Script complete .......... The realted necessary portion of dmesg is below [ 30.623107] init: plymouth-upstart-bridge main process ended, respawning [ 70.629943] usb 1-2: new high-speed USB device number 2 using ehci-omap [ 70.782501] usb 1-2: config 1 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 255, changing to 11 [ 70.782592] usb 1-2: New USB device found, idVendor=058b, idProduct=0041 [ 70.782623] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 70.791381] cdc_acm 1-2:1.0: This device cannot do calls on its own. It is not a modem. [ 70.801483] cdc_acm 1-2:1.0: ttyACM0: USB ACM device [ 73.041625] usb 1-2: USB disconnect, device number 2 [ 74.209930] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 74.369049] usb 1-2: New USB device found, idVendor=1bc7, idProduct=0021 [ 74.369110] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 74.369140] usb 1-2: Product: Telit Wireless Module [ 74.369171] usb 1-2: Manufacturer: Telit wireless solutions [ 74.369201] usb 1-2: SerialNumber: 357164042197668 [ 74.390258] cdc_acm 1-2:1.0: This device cannot do calls on its own. It is not a modem. [ 74.400207] cdc_acm 1-2:1.0: ttyACM0: USB ACM device [ 74.406890] cdc_acm 1-2:1.2: This device cannot do calls on its own. It is not a modem. [ 74.416900] cdc_acm 1-2:1.2: ttyACM1: USB ACM device [ 74.462188] cdc_acm 1-2:1.4: This device cannot do calls on its own. It is not a modem. [ 74.472259] cdc_acm 1-2:1.4: ttyACM2: USB ACM device [ 74.478363] cdc_acm 1-2:1.6: This device cannot do calls on its own. It is not a modem. [ 74.488372] cdc_acm 1-2:1.6: ttyACM3: USB ACM device [ 74.495269] cdc_acm 1-2:1.8: This device cannot do calls on its own. It is not a modem. [ 74.505279] cdc_acm 1-2:1.8: ttyACM4: USB ACM device [ 74.510040] cdc_acm 1-2:1.10: This device cannot do calls on its own. It is not a modem. [ 74.520141] cdc_acm 1-2:1.10: ttyACM5: USB ACM device [ 74.530090] cdc_acm 1-2:1.12: This device cannot do calls on its own. It is not a modem. [ 74.540283] cdc_acm 1-2:1.12: ttyACM6: USB ACM device [ 74.619720] cdc_acm 1-2:1.0: This device cannot do calls on its own. It is not a modem. [ 74.629455] cdc_acm 1-2:1.0: ttyACM0: USB ACM device [ 74.634429] cdc_acm 1-2:1.2: This device cannot do calls on its own. It is not a modem. [ 74.644042] cdc_acm 1-2:1.2: ttyACM1: USB ACM device [ 74.649475] cdc_acm 1-2:1.4: This device cannot do calls on its own. It is not a modem. [ 74.659027] cdc_acm 1-2:1.4: ttyACM2: USB ACM device [ 74.664459] cdc_acm 1-2:1.6: This device cannot do calls on its own. It is not a modem. [ 74.674133] cdc_acm 1-2:1.6: ttyACM3: USB ACM device [ 74.678741] cdc_acm 1-2:1.8: This device cannot do calls on its own. It is not a modem. [ 74.688415] cdc_acm 1-2:1.8: ttyACM4: USB ACM device [ 74.693389] cdc_acm 1-2:1.10: This device cannot do calls on its own. It is not a modem. [ 74.703186] cdc_acm 1-2:1.10: ttyACM5: USB ACM device [ 74.708099] cdc_acm 1-2:1.12: This device cannot do calls on its own. It is not a modem. [ 74.717895] cdc_acm 1-2:1.12: ttyACM6: USB ACM device `

    Read the article

  • Help me with CDMA usb modem (How to change storage mode to modem mode)

    - by user98698
    My modem isn't in the device list of usb_modeswitch.... so I cannot automatically use the modem on the ubuntu.... I found the way to change the modem from usb storage mode to modem mode and I can use my modem. But I forgot the instructions. I don't know the modem's name. It's chinese modem. But here is vendor/product id ....05 Qualcomm, Inc. Mass Storage Device and I think the target vendor/product id is ..... 05. So help me to change. I don't want to replace modem. pls. Sorry for my english....

    Read the article

  • Configure USB GSM Modem

    - by adisembiring
    I want to configure EVDO Usb Modem in Ubuntu 10.10 I insert my usb modem to laptop and check the usb is detected or not using $sudo lsusb and the result is: Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 201e:2009 Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 14cd:6600 Super Top USB 2.0 IDE DEVICE Bus 002 Device 002: ID 201e:2009 is my us device. and than I execute command $dmesg | grep -e tty [ 0.000000] console [tty0] enabled [ 818.054660] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB0 [ 818.055125] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB1 [ 818.055647] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB2 [ 818.330641] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 818.330743] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 818.330840] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2 [ 1054.917473] usb 2-1.2: GSM modem (1-port) converter now attached to ttyUSB0 [ 1054.917995] usb 2-1.2: GSM modem (1-port) converter now attached to ttyUSB1 [ 1054.918481] usb 2-1.2: GSM modem (1-port) converter now attached to ttyUSB2 [ 1055.214087] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 1055.214221] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 1055.214356] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2 Why converter disconnected from ttyUSB2 ? and than I try to execute command $sudo wvdialconf sorry, no modem was detected! Is it in use by another program ? did you configure it properly with setserials ? I change the same type usb modem from my friend, but I still get error above.

    Read the article

  • Configure EVDO USB Modem in Ubuntu 10.10

    - by adisembiring
    I want to configure EVDO Usb Modem in Ubuntu 10.10 I insert my usb modem to laptop and check the usb is detected or not using $sudo lsusb and the result is: Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 201e:2009 Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 14cd:6600 Super Top USB 2.0 IDE DEVICE Bus 002 Device 002: ID 201e:2009 is my us device. and than I execute command $dmesg | grep -e tty [ 0.000000] console [tty0] enabled [ 818.054660] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB0 [ 818.055125] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB1 [ 818.055647] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB2 [ 818.330641] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 818.330743] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 818.330840] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2 [ 1054.917473] usb 2-1.2: GSM modem (1-port) converter now attached to ttyUSB0 [ 1054.917995] usb 2-1.2: GSM modem (1-port) converter now attached to ttyUSB1 [ 1054.918481] usb 2-1.2: GSM modem (1-port) converter now attached to ttyUSB2 [ 1055.214087] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 1055.214221] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 1055.214356] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2 Why converter disconnected from ttyUSB2 ? and than I try to execute command $sudo wvdialconf sorry, no modem was detected! Is it in use by another program ? did you configure it properly with setserials ? I change the same type usb modem from my friend, but I still get error above.

    Read the article

  • HSDPA modem only working on certain USB ports

    - by nabulke
    Depending on which USB port I use to connect my HSDPA modem, the network manager will connect to the internet or not. I used to work (i.e. established a internet connection automatically) on all ports, but over time it simply stopped on some ports. lsusb output in all cases looks like that (Device ID varies depending on USB port): Bus 001 Device 009: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modem Any ideas what could cause this behaviour? What can I do to fix this? ADDED One additional information about the modem: if connected via USB it will be available as as harddrive AND as a HSDPA modem (kind of a duality...). In the error case, it will only be shown as a harddrive. ADDITIONAL INFO AS REQUESTED MODEM NOT WORKING Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 413c:8000 Dell Computer Corp. BC02 Bluetooth Adapter Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 007: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modem Bus 001 Device 005: ID 046d:c00c Logitech, Inc. Optical Wheel Mouse Bus 001 Device 004: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Bus 001 Device 003: ID 413c:0058 Dell Computer Corp. Port Replicator Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub laptop:~$ dmesg | grep 'usb' [ 0.225371] usbcore: registered new interface driver usbfs [ 0.225387] usbcore: registered new interface driver hub [ 0.225418] usbcore: registered new device driver usb [ 0.504291] usb usb1: configuration #1 chosen from 1 choice [ 0.504767] usb usb2: configuration #1 chosen from 1 choice [ 0.505046] usb usb3: configuration #1 chosen from 1 choice [ 0.505601] usb usb4: configuration #1 chosen from 1 choice [ 1.061064] usb 1-6: new high speed USB device using ehci_hcd and address 3 [ 1.192636] usb 1-6: configuration #1 chosen from 1 choice [ 1.447006] usb 2-2: new full speed USB device using uhci_hcd and address 2 [ 1.634908] usb 2-2: configuration #1 chosen from 1 choice [ 1.708164] usb 1-6.1: new high speed USB device using ehci_hcd and address 4 [ 1.801668] usb 1-6.1: configuration #1 chosen from 1 choice [ 2.076279] usb 1-6.1.1: new low speed USB device using ehci_hcd and address 5 [ 2.174932] usb 1-6.1.1: configuration #1 chosen from 1 choice [ 6.580315] usb 1-6.1.2: new high speed USB device using ehci_hcd and address6 [ 6.683479] usb 1-6.1.2: configuration #1 chosen from 1 choice [ 20.018671] usbcore: registered new interface driver btusb [ 20.131703] usbcore: registered new interface driver usb-storage [ 20.131988] usb-storage: device found at 6 [ 20.131991] usb-storage: waiting for device to settle before scanning [ 20.207981] usb 1-6.1.2: USB disconnect, address 6 [ 20.291499] usbcore: registered new interface driver hiddev [ 20.297052] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.1/1-6.1.1/1-6.1.1:1.0/input/input6 [ 20.297465] generic-usb 0003:046D:C00C.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1d.7-6.1.1/input0 [ 20.297534] usbcore: registered new interface driver usbhid [ 20.297803] usbhid: v2.6:USB HID core driver [ 26.552360] usb 1-6.1.2: new high speed USB device using ehci_hcd and address 7 [ 26.663506] usb 1-6.1.2: configuration #1 chosen from 1 choice [ 26.709628] usb-storage: device found at 7 [ 26.709631] usb-storage: waiting for device to settle before scanning [ 26.732387] usb-storage: device found at 7 [ 26.732390] usb-storage: waiting for device to settle before scanning [ 31.709568] usb-storage: device scan complete [ 31.733676] usb-storage: device scan complete MODEM WORKING Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 046d:c00c Logitech, Inc. Optical Wheel Mouse Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 413c:8000 Dell Computer Corp. BC02 Bluetooth Adapter Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modem Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub dmesg | grep 'usb' [ 0.134811] usbcore: registered new interface driver usbfs [ 0.134826] usbcore: registered new interface driver hub [ 0.134858] usbcore: registered new device driver usb [ 0.360327] usb usb1: configuration #1 chosen from 1 choice [ 0.360783] usb usb2: configuration #1 chosen from 1 choice [ 0.361061] usb usb3: configuration #1 chosen from 1 choice [ 0.361611] usb usb4: configuration #1 chosen from 1 choice [ 1.144122] usb 2-2: new full speed USB device using uhci_hcd and address 2 [ 1.346896] usb 2-2: configuration #1 chosen from 1 choice [ 1.588072] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 1.761204] usb 3-1: configuration #1 chosen from 1 choice [ 5.972042] usb 1-1: new high speed USB device using ehci_hcd and address 4 [ 6.115438] usb 1-1: configuration #1 chosen from 1 choice [ 19.990565] usbcore: registered new interface driver usbserial [ 19.991429] usb-storage: device found at 4 [ 19.991432] usb-storage: waiting for device to settle before scanning [ 20.017260] usbcore: registered new interface driver usb-storage [ 20.017305] usbcore: registered new interface driver usbserial_generic [ 20.017308] usbserial: USB Serial Driver core [ 20.017817] usb-storage: device found at 4 [ 20.017820] usb-storage: waiting for device to settle before scanning [ 20.070796] usbcore: registered new interface driver btusb [ 20.229525] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 20.229776] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 20.229843] usbcore: registered new interface driver option [ 20.230396] usbcore: registered new interface driver hiddev [ 20.246280] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input6 [ 20.246438] generic-usb 0003:046D:C00C.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1d.1-1/input0 [ 20.246479] usbcore: registered new interface driver usbhid [ 20.246483] usbhid: v2.6:USB HID core driver [ 25.436579] usb-storage: device scan complete [ 25.437674] usb-storage: device scan complete

    Read the article

  • Huwaei Modem working fine!

    - by user109156
    yesterday I installed Ubuntu 12 in my sony vaio lappy. I have Huwaei E173 3G modem, simply inserted that modem into usb slot, after a few seconds modem started blinking finding as activated. I opened network profile and created a new network under 'Mobile broadband' tab everything was automated and I felt awesome, infact I used net for a while. Next morning, I placed modem into usb, nothing happened, no sign of modem presence even but modem is blinking, I tried creating a new connection once again but attained no luck. Kindly help me in resolving problem. regards sandy

    Read the article

  • 3G USB Modem Not Working in 12.04

    - by Seyed Mohammad
    When I connect my 3G USB Modem to my laptop with 12.04, nothing shows up in Network-Manager. This modem is working in 11.10 and the modem is shown in Network-Manager but not in 12.04 !! Here are the outputs of lsusb and usb-devices on two machines , one with 11.10 and the other with 12.04 : Ubuntu-11.10 : $ lsusb Bus 002 Device 009: ID 1c9e:6061 $ usb-devices T: Bus=02 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#= 9 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=6061 Rev=00.00 S: Manufacturer=3G USB Modem ?? S: SerialNumber=000000000002 C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Ubuntu-12.04 : $ lsusb Bus 002 Device 003: ID 1c9e:6061 OMEGA TECHNOLOGY WL-72B 3.5G MODEM $ usb-devices T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=6061 Rev=00.00 S: Manufacturer=Qualcomm, Incorporated S: Product=USB MMC Storage S: SerialNumber=000000000002 C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) As the output of the above commands show, the device is detected as a modem in 11.10 but in 12.04 it is detected as a USB storage (the device is both a 3G Modem and a SD-card USB adapter). Any help ?!

    Read the article

  • Qualcomm Gobi WWAN modem no longer appears in Network Manager

    - by Andy E
    Not sure what happened here. I installed Cinnamon on my Ubuntu 12.10 environment yesterday, rebooted when finished and everything was working fine. I even used my WWAN modem after my fixed line broadband went down. However, after starting my machine this morning and seeing that my fixed line is still having problems (intermittently), I clicked the network applet and my WWAN device wasn't listed. It's not in the main network manager window either. It is still present on the system, however: $ lsusb Bus 001 Device 003: ID 05ca:18b0 Ricoh Co., Ltd Sony Vaio Integrated Webcam Bus 001 Device 004: ID 05c6:9221 Qualcomm, Inc. Gobi Wireless Modem (QDL mode) Bus 002 Device 005: ID 04e8:6865 Samsung Electronics Co., Ltd Bus 002 Device 002: ID 0409:005a NEC Corp. HighSpeed Hub Bus 003 Device 002: ID 147e:1000 Upek Biometric Touchchip/Touchstrip Fingerprint Sensor Bus 008 Device 002: ID 044e:3017 Alps Electric Co., Ltd BCM2046 Bluetooth Device Debug output from modem-manager, refers to a device that is blacklisted: modem-manager[10186]: [1355478137.024491] [mm-manager.c:866] device_added(): (tty/ttyUSB0): port's parent device is blacklisted modem-manager[10186]: [1355478137.024607] [mm-manager.c:875] device_added(): (tty/ttyS0): port's parent platform driver is not whitelisted modem-manager[10186]: [1355478137.024700] [mm-manager.c:875] device_added(): (tty/ttyS1): port's parent platform driver is not whitelisted ... I couldn't see anything relevant in the debug output for network-manager, but I've created a paste for it just in case. In /lib/udev/rules.d/77-mm-qdl-device-blacklist.rules, I found the following line that matches the device IDs from the lsusb output: # Generic Gobi QDL device ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9221", ENV{ID_MM_DEVICE_IGNORE}="1" I tried commenting out the second line and restarting network-manager/modem-manager but it didn't help. I've no idea where to go from here, does anyone else have any ideas?

    Read the article

  • AT&T DSL 2701HG-B Modem, port forwarding to RealVNC

    - by Paula
    Our old cable modem could easily be set up to forward an "incoming port request" to the RealVNC software. Allowing us to log into our home computer from any location. We don't see any such configuration possiblity with our new AT&T DSL 2Wire 2701HG-B modem. (And it appears to have 2 entirely different 'set up screens'. Why?) Where is the screen that allows "forward incoming request for a certain port", to a certain computer, and direct it towards RealVNC"?

    Read the article

  • CMOTECH D-50 modem installation in Ubuntu 12.04

    - by Ricardo
    I have recently upgraded from 10.04 to 12.04. I had installed a 3G D-50 modem from CMOTECH. The program for Debian is provided by a Swedish company (ice.net). Usually after some mambo jambo of installung the libg++ libraries requested you can install it and runned in Ubuntu 8.04, 9.04, 10.04 and as far as I know in 11.04. When I upgraded and I click on the icon of ice.net it worked. However, I noticed that the usb D-50 modem was never mounted as usb and it didn't show up in the Lauchnpad or workspace (as when you plug a usb memory stick or another HD). I moved the icon from place in the launchpad and since when I click on the ice.net icon the same message appears: "please plug in your modem". The modem works (I've tested in Windows after this) and it blinks blue (sign that it works and picks up signal). If I type lsusb then I see that Ubuntu sees it on BUS address 006: Bus 006 Device 003: ID 16d8:6803 CMOTECH Co., Ltd. CNU-680 CDMA EV-DO modem I've tried wvdial without success. How can I get the D-50 usb modem mounted as in the previous versions of Ubuntu ?. Any help will be much appreciated. bests. Ricardo

    Read the article

  • PC Phone Modem Software

    - by darthg8r
    I'm looking for a piece of software that will let me hook a phone line up to my PC Modem and place calls over it using my mic and computer speakers. Does anyone have any experience with anything like this?

    Read the article

  • dsl modem problem in ubuntu 11.10

    - by Misterious
    Earlier I used Windows 7 and the modem used to work absolutely fine. Even when it disconnected it used to reconnect automatically without any trouble. But then I installed Ubuntu 11.10 on dual boot and set up the modem connection properly but the modem now disconnects much more frequently(eariler it disconnected once in 5 hours or so and after ubuntu in 5 minutes!!). Also once disconnected it does not reconnect even when i have checked the connect automatically button. I have to restart the system to reconnect it. Also then I clean installed windows and modem works perfectly fine again. What is the reason for this and how can I solve this? I really want to use ubuntu but due to this problem I cant. Sorry for my poor English.

    Read the article

  • E160 ubuntu 12.04 can't detect the modem

    - by Matt
    i've got problem with e160 on ubuntu 12.04. I'cant configure network manager and connect because NM can't see the e160. I;ve tried lot of solutions with no result. ateusz@mateusz-Aspire-5738:~$ sudo usb_modeswitch -v 0x12d1 -p 0x1003 -H [sudo] password for mateusz: aLooking for default devices ... found matching product ID adding device Found device in default mode, class or configuration (1) Accessing device 002 on bus 001 ... Getting the current device configuration ... OK, got current device configuration (1) Using first interface: 0x00 Using endpoints 0x01 (out) and 0x82 (in) Not a storage device, skipping SCSI inquiry USB description data (for identification) ------------------------- Manufacturer: HUAWEI Technology Product: HUAWEI Mobile Serial No.: not provided ------------------------- Sending Huawei control message ... OK, Huawei control message sent - Run lsusb to note any changes. Bye. Dmesg [ 521.480062] usb 1-4: reset high-speed USB device number 4 using ehci_hcd [ 521.617792] option 1-4:1.1: GSM modem (1-port) converter detected [ 521.617945] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB0 [ 521.618062] option 1-4:1.0: GSM modem (1-port) converter detected [ 521.618232] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB1 [ 530.840276] option: option_instat_callback: error -108 [ 530.840455] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 530.840484] option 1-4:1.0: device disconnected [ 537.680378] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 537.680398] option 1-4:1.1: device disconnected [ 537.792088] usb 1-4: reset high-speed USB device number 4 using ehci_hcd [ 537.929549] option 1-4:1.1: GSM modem (1-port) converter detected [ 537.929702] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB0 [ 537.929818] option 1-4:1.0: GSM modem (1-port) converter detected [ 537.929993] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB1 [ 547.224294] option: option_instat_callback: error -108 [ 547.224470] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 547.224511] option 1-4:1.0: device disconnected [ 556.988066] tty_ldisc_hangup: waiting (usb-storage) for ttyUSB0 took too long, but we keep waiting... [ 558.990663] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 558.990698] option 1-4:1.1: device disconnected [ 559.100068] usb 1-4: reset high-speed USB device number 4 using ehci_hcd [ 559.241293] option 1-4:1.1: GSM modem (1-port) converter detected [ 559.241446] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB0 [ 559.241565] option 1-4:1.0: GSM modem (1-port) converter detected [ 559.241739] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB1 [ 568.728283] option: option_instat_callback: error -108 [ 568.728466] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 568.728496] option 1-4:1.0: device disconnected lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 003: ID 064e:a103 Suyin Corp. Acer/HP Integrated Webcam [CN0314] Bus 005 Device 002: ID 09da:c20a A4 Tech Co., Ltd Bus 001 Device 002: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E230/E270/E870 HSDPA/HSUPA Modem

    Read the article

  • ZTE USB Modem AC2736, connection not possible in Ubuntu 12.04.1 LTS

    - by Fredo
    It's a long post but nearly covers all my experiments and changes I did to my NM. Hope the information is complete and if there are still question, more information can be provided. I've a ZTE AC2736 USB Modem (CDMA modem) which worked fine in Ubuntu 10.04 /11.10. I recently switched to 12.04.1 (precise pangolin). after the switch the first issue I faced was to connect to internet using my USB modem (ISP: Reliance Brand: Netconnect). Tried to run the drivers provided by Reliance but they are old and won't support Kernel 2.6.30 above. since the code was not downloaded with ISO image (of 12.04) i couldn't compile the files provided in such driver. lsusb does detect it as Modem with output similar to 19d2:fff1 ZTE CDMA technologies inc. (or similar as i didn't note it down) If it is detected as USB storage it shows 19d2:fff5 (as per few online forums, i may be wrong here). I used the network Manager and configured the modem to dial #777 (default) and the ISP provided username:password combination. It tries to connect to internet (3-4 times automatically)but fails to get online. once I was able to connect in the monring hours and the message was flashed 'registered on CDMA home network'. I was able to run an update. the kernel was updated with 3.0.2 -pae OR something similar (can find out if required). I surfed the net for about 2 hours later before restarting. After the restart, again the Modem was not able to get me online. I kept trying for many times. I tried changing the setting in NM. One evening after dark I was able to connect to network with same message flash 'registered on CDMA home network' (the message was similar, i'm not precise here,sorry). I was able to surf the net for nearly 3 hours before I switched off my Laptop. I'm not able to get online after that day, It's been 3 days now. I'll try the observered theory of late/early hours sometime soon as mentioned below. Laptop configuration : Make: Lenovo Model: B480 Processor: Intel B950 RAM: 4G DDR3 HDD: 500 G Broadcom Wireless/Bluetooth/Ethernet LAN OS: FreeDOS / Ubuntu 12.04 LTS (dualboot) Kernel 3.0.2-pae Obeservation : I'm able to connect to internet in those hours when generally the speed is high (low usage by other network (wireless) users). like in early mornings or late nights. This is strange as connection should not be dependent on bandwidth usage. Any help would be appraciated to fix this issue. before I decide to cahnge the OS or ISP.

    Read the article

  • DSL modem problem in 11.10

    - by Misterious
    Earlier I used Windows 7 and the modem used to work absolutely fine. Even when it got disconnected it used to reconnect automatically without any trouble. But then I installed Ubuntu 11.10 on dual-boot and set up the modem connection properly but the modem now disconnects much more frequently (earlier it disconnected once in 5 hours or so and after Ubuntu in 5 minutes!). Also once disconnected, it does not reconnect even when I have checked the "Connect Automatically" button. I have to restart the system to reconnect it. I the clean installed Windows and modem works perfectly fine again. What is the reason for this and how can I solve this? I really want to use Ubuntu but due to this problem I can't.

    Read the article

  • Cannot Connect Modem ( /dev/ttySL0 ) Using gnome-ppp - Dial-Up Connection

    - by nicorellius
    I'm trying to connect my Toshiba Satellite running Ubuntu 10.04 to my Eris running Android 2.1 through a Bluetooth connection and establish a dial-up connection (DUN) with the modem. I can connect my phone to my laptop, and I can detect my modem (after installing drivers), which is located at /dev/ttySL0. But when I launch gnome-ppp and enter my phone number (123 for PDA-Net) I get a dialog that says "Connecting... Sending Password" with Log and Cancel buttons. The log shows this: --> WvDial: Internet dialer version 1.60 --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ ATZ OK --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 OK --> Modem initialized. --> Please enter password (or empty password to stop): --> Configuration does not specify a valid login name. The PDA-Net DUN protocol is running and shows no error. Any ideas? Any help is much appreciated.

    Read the article

  • Micromax 3G mobile internet modem not being detected

    - by arjith
    I have Micromax 3G modem, and i inserted it in the USB port, but it is not being detected by Ubuntu 12.04, that i'm using from a Live USB. I tried creating a mobile internet connection, however, eventhough i created it, there is no option to connect. I had previously used 11.10 Ubuntu, and it had automatically detected the datastick modem and asked me to create a connection. On typing lsusb in the terminal it gives the following: **Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 03f0:5307 Hewlett-Packard Bus 001 Device 008: ID 1c9e:9605 OMEGA TECHNOLOGY Bus 001 Device 006: ID 5986:0364 Acer, Inc tried to insert the modem before boot, with negative results **

    Read the article

  • Accessing and controlling to the modem by ethernet connection

    - by iwd35
    I have a PC and I connectted to my modem (via ethernet cable). I want to prepare interface (VS2010) and I want to connect it and do the following: Modem access the admin page (IP: 192.168.1.1 password: admin password: admin) Wireless band (2.4GHz or 5GHz) changing Network mode (N-only, B/G/N- Mixed) changing channel changing (channel 1, 2,3, etc.) The project will be a desktop application. I will use VB .NET; modem model:cisco linksys wag320. How I can do it?

    Read the article

  • USB modem could not mount on 12.04

    - by maz
    I have a usb wimax modem. If I connect it at ubuntu 10.04 it has been detected and mounted as cd see here. From there I got that it is "iso96660" type and device location is /dev/sr1. But when I connect this usb modem in Ubuntu 12.04, it could not be mounted. So I have tried to find the file sr1 in this location /dev/ and could not found any-thing. But if disconnect and then re-connect the usb modem at this path /dev/, I saw a flickering of "sr1" named file for a certain time (1 sec) then it's dis-appear. Can anyone guide me to connect it step-by-step in Ubuntu 12.04?

    Read the article

  • PPPD Is Locking the Modem and Not Releasing It

    - by Skid
    Got an issue with PPPD on one of our system, we have a PC that is used to talk to remote sites via a dial up connection, the modem can both connect out to the sites and the sites also dial back in. Currently I'm having an issue where some times a site ether dials in or we dial out, and it connects, but then blocks the modem and throws and error to kern.log. Aug 26 14:23:57 TM-SCADA kernel: [191233.503745] INFO: task pppd:8142 blocked for more than 120 seconds. Aug 26 14:23:57 TM-SCADA kernel: [191233.503750] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Aug 26 14:23:57 TM-SCADA kernel: [191233.503753] pppd D ffffffff8180cb40 0 8142 1 0x00000000 Aug 26 14:23:57 TM-SCADA kernel: [191233.503759] ffff8800ac1f5dc8 0000000000000086 ffff8800ac1f5fd8 00000000000137c0 Aug 26 14:23:57 TM-SCADA kernel: [191233.503765] ffff8800ac1f4010 00000000000137c0 00000000000137c0 00000000000137c0 Aug 26 14:23:57 TM-SCADA kernel: [191233.503770] ffff8800ac1f5fd8 00000000000137c0 ffffffff81c13020 ffff880135df5b80 Aug 26 14:23:57 TM-SCADA kernel: [191233.503775] Call Trace: Aug 26 14:23:57 TM-SCADA kernel: [191233.503784] [<ffffffff8166ba29>] schedule+0x29/0x70 Aug 26 14:23:57 TM-SCADA kernel: [191233.503790] [<ffffffff813db005>] tty_ldisc_ref_wait+0x65/0xb0 Aug 26 14:23:57 TM-SCADA kernel: [191233.503796] [<ffffffff813f3061>] ? uart_ioctl+0xd1/0x1c0 Aug 26 14:23:57 TM-SCADA kernel: [191233.503801] [<ffffffff81076960>] ? wake_up_bit+0x40/0x40 Aug 26 14:23:57 TM-SCADA kernel: [191233.503806] [<ffffffff813d3fa0>] tty_ioctl+0x2c0/0x9a0 Aug 26 14:23:57 TM-SCADA kernel: [191233.503810] [<ffffffff811d0549>] ? fcntl_setlk+0x69/0x200 Aug 26 14:23:57 TM-SCADA kernel: [191233.503815] [<ffffffff81195f79>] do_vfs_ioctl+0x99/0x330 Aug 26 14:23:57 TM-SCADA kernel: [191233.503820] [<ffffffff81195212>] ? do_fcntl+0x232/0x410 Aug 26 14:23:57 TM-SCADA kernel: [191233.503823] [<ffffffff811962b1>] sys_ioctl+0xa1/0xb0 Aug 26 14:23:57 TM-SCADA kernel: [191233.503829] [<ffffffff81674e69>] system_call_fastpath+0x16/0x1b The syslog trace stops at "Serial connection established". Aug 28 06:00:03 TM-SCADA pppd[10358]: pppd 2.4.5 started by root, uid 0 Aug 28 06:00:04 TM-SCADA chat[10360]: abort on (NO CARRIER) Aug 28 06:00:04 TM-SCADA chat[10360]: abort on (NO DIALTONE) Aug 28 06:00:04 TM-SCADA chat[10360]: abort on (ERROR) Aug 28 06:00:04 TM-SCADA chat[10360]: abort on (NO ANSWER) Aug 28 06:00:04 TM-SCADA chat[10360]: abort on (BUSY) Aug 28 06:00:04 TM-SCADA chat[10360]: abort on (Username/Password Incorrect) Aug 28 06:00:04 TM-SCADA chat[10360]: send (atz^M) Aug 28 06:00:04 TM-SCADA chat[10360]: expect (OK) Aug 28 06:00:04 TM-SCADA chat[10360]: atz^M^M Aug 28 06:00:04 TM-SCADA chat[10360]: OK Aug 28 06:00:04 TM-SCADA chat[10360]: -- got it Aug 28 06:00:04 TM-SCADA chat[10360]: send (atx0^M) Aug 28 06:00:04 TM-SCADA chat[10360]: expect (OK) Aug 28 06:00:04 TM-SCADA chat[10360]: ^M Aug 28 06:00:04 TM-SCADA chat[10360]: atx0^M^M Aug 28 06:00:04 TM-SCADA chat[10360]: OK Aug 28 06:00:04 TM-SCADA chat[10360]: -- got it Aug 28 06:00:04 TM-SCADA chat[10360]: send (atdt0123456789^M) Aug 28 06:00:04 TM-SCADA chat[10360]: expect (CONNECT/ARQ) Aug 28 06:00:04 TM-SCADA chat[10360]: ^M Aug 28 06:00:30 TM-SCADA chat[10360]: atdt0123456789^M^M Aug 28 06:00:30 TM-SCADA chat[10360]: CONNECT/ARQ Aug 28 06:00:30 TM-SCADA chat[10360]: -- got it Aug 28 06:00:30 TM-SCADA pppd[10358]: Serial connection established. I've only found two ways to release the modem in this condition, the first is to turn the modem off and on again, the second is to delete the serial lock file, and then SIGKILL pppd. Now I could write into our software to do the latter if the modem is locked, but I would rather stop it from locking in the first place if at all possible. The reason I put this issue in the askubuntu is because we used to use OpenSuse and never had an issue with it, admittedly that was version 11.2 or earlier so its still and old kernel, but I figured I would ask here first anyway. Any suggestions of places to look would be appreciated.

    Read the article

  • Huawei 3G modem disconnects after successful connection

    - by theo
    I'm having a severe connection problem in Ubuntu 12.04 that renders the OS almost useless. I have a Huawei E352 3G modem. Ubuntu detects it as a mobile broadband connection without any problem. I created a new connection by providing APN. Now after connection it disconnects after a few seconds, and the modem disappears from mobile broadband list. I tried various workarounds but neither worked. I had no problem in Ubuntu 11.10.

    Read the article

  • My pc freezes when I connect to the internet with my iburst usb modem

    - by Kevin
    I am quite new to it and I'm having some trouble with iBurst usb modem.I followed the instructions of Graham Inggs here: https://help.ubuntu.com/community/Iburst and now it seems I can connect to the internet, but when I try to connect my whole desktop freezes. When I boot into Ubuntu with my modem connected all is well until I try to open Firefox then my desktop freezes as well.I used Graham Inngs' ibdriver in DKMS fromat solution and it worked apart from the freezing. Graham Inggs made a patch for this problem for older linux versions but I can't seem to find anything compatible with 12.04. Can someone please help?

    Read the article

  • Connecting a reliance zte AC2737 netconnect + modem

    - by coditor
    I have a Reliance netconnect+ zte Ac2737. It has an allocated data of 5gb per month. The modem works fine only after the allocated data is over, for which i have to pay extra to the provider. I tried contacting the provider, but it was not of much help. The system detects the modem every time. I assume that it must be a possible problem with the provider, so is there any chance it is the problem of Ubuntu 12.04 LTS 64 bit itself as i have no other reason to think otherwise an it works fine every time on windows.

    Read the article

  • USB modem dosn't working in Ubuntu

    - by skeeph
    In Ubuntu 12.10 USB-modem Huawei 171 from MTS is not connected to the network. First on the message "Are you registered on the network", immediately after that, "You are disconnected from the network." This happened after there was an internal error notification Ubuntu. I did not pay attention, and closed by sending the report. After the reboot does not work. Settings are not changed. I am online with this modem in Windows 8. Could you tell me why it is not working,please thank you in advance P.S Sorry for my English. It's foreign language for me. Please mention to me where are my mistakes. Thanks

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >