Search Results

Search found 60 results on 3 pages for 'mtp'.

Page 1/3 | 1 2 3  | Next Page >

• Problems detecting android tablet IView 788TPC with mtp-tools

  - by Elder Geek

  I installed mtp-tools on 14.04 "Trusty" through Software Center. No problems with install. Issuing `mtp-detect' results in 'Unable to open ~/.mtpz-data for reading, MTPZ disabled.libmtp version: 1.1.6 Listing raw device(s) No raw devices found.' I did some research and found that mtpfs might be required. so installed that with :~$ sudo apt-get install mtpfs I still get the following result :~$ mtp-detect Unable to open ~/.mtpz-data for reading, MTPZ disabled.libmtp version: 1.1.6 Listing raw device(s) No raw devices found. My research indicates that the mtp-tools package is still under development. source: http://libmtp.sourceforge.net/ and the documentation is not comprehensive. source man mtp-tools as well as mtp-detect -h I tried adding the PPA from Are there any plans to improve mtp support on future Ubuntu releases? but it seems this is already worked into trusty 14.04 and won't resolve the problem. Can anyone provide a recommended course of action to resolve this problem?

  Read the article

• Preventing pop-up dialogs when connecting an MTP device

  - by DrownedSensors

  I'm using Lubuntu 14.04 with a Samsung Galaxy S3 running Android 4.3. Each time I connect my phone via USB, I get the following dialog: Unable to open MTP device '[usb:002,023]' A few moments later, I get the "Removable medium is inserted" dialog, prompting me to open in File Manager. After that, the phone is connected and fully accessible. So MTP works. The problem is that I plug in my phone to charge every time I sit down, and unplug it every time I step away. Dismissing these two dialogs every time is a pain. I would think the "Removable medium" dialog is the easier candidate. How do I tell Ubuntu to take no action and stop prompting me? For the MTP error, all the discussion I can find is for people who can't get MTP working at all. For me, it's working, but only after throwing this initial error. I've verified that my device is present in /lib/udev/rules.d/69-libmtp.rules

  Read the article

• Galaxy Note II MTP on Ubuntu 12.04

  - by Anass Ahmed

  I bought a branding new Galaxy Note II and I tried to mount its storage to my ubuntu laptop. As you know, Android 4.0+ uses MTP by default. Android 4.1 doesn't support USB Mass Storage anymore! So I have to use MTP to open my files via USB. I followed this article to get it work. It worked only for External Memory Card. but the internal cannot be reached! $mount /dev/sda3 on / type ext4 (rw) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) /dev/sda5 on /media/Islamics type fuseblk (rw,noexec,nosuid,nodev,allow_other,blksize=4096) /dev/sda8 on /media/Technology type fuseblk (rw,noexec,nosuid,nodev,allow_other,blksize=4096) /dev/sda7 on /media/Misc type fuseblk (rw,noexec,nosuid,nodev,allow_other,blksize=4096) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) gvfs-fuse-daemon on /home/anass/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=anass) gvfs-fuse-daemon on /root/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev) mtpfs on /media/GalaxyNote2 type fuse.mtpfs (rw,nosuid,nodev,allow_other,user=anass)

  Read the article

• MTP Won't Work With Newer Ubuntu

  - by spacesword

  I have a Philips GoGear Vibe 4 GB, set to MTP mode, as it's always been. This works fine with older versions of Ubuntu and works fine with Windows, but doesn't work with newer versions of Ubuntu. The version history is like this: 12.04 - works 12.10 - works 13.04 - doesn't work 14.04 - doesn't work Windows 7 - works When you plug the MP3 player in Ubuntu the file manager opens the root of the device, which contains the folder "internal storage". When you click on "internal storage" to open it, the file manager just hangs. And if you try to unmount the MP3 player, that process hangs too, until you just unplug it. In Windows when you click on internal storage, it opens and shows all the files it contains. And in the earlier versions of Ubuntu it just worked. Any ideas? Thanks.

  Read the article

• Getting MTP to work with a Galaxy tab 2 7.0?

  - by Wouter

  I'm trying to get MTP with the galaxy tab 2 7.0 working on my ubuntu installation. Such that I can access the files. I tried to do what is described here: http://www.omgubuntu.co.uk/2011/12/how-to-connect-your-android-ice-cream-sandwich-phone-to-ubuntu-for-file-access I however fail at executing one of the following commands mtp-detect | grep idVendor mtp-detect | grep idProduct This fails [20:42|0] $ mtp-detect | grep idVender Device 0 (VID=04e8 and PID=6860) is a Samsung GT-P7310/P7510/N7000/I9100/Galaxy Tab 7.7/10.1/S2/Nexus/Note. PTP_ERROR_IO: failed to open session, trying again after resetting USB interface LIBMTP libusb: Attempt to reset device LIBMTP PANIC: failed to open session on second attempt Unable to open raw device 0 [20:44|0] $ mtp-detect | grep idProduct Device 0 (VID=04e8 and PID=6860) is a Samsung GT-P7310/P7510/N7000/I9100/Galaxy Tab 7.7/10.1/S2/Nexus/Note. PTP_ERROR_IO: failed to open session, trying again after resetting USB interface LIBMTP libusb: Attempt to reset device LIBMTP PANIC: failed to open session on second attempt Unable to open raw device 0 Now my guess was was that the idVender is the same as the VID (04e8) and the idProduct is the same as PID (6860) Now I continued to work with those values and completed the tutorial. When finished I tried android-connect This returned fuse: bad mount point `/media/GalaxyTab': Transport endpoint is not connected Does anybody have a clue what to do? Also I want to note that when I connect my GalaxyTab 2 7.0 that I still get a pop-up of ubuntu that a device was connected. I also can still see the mapstructure, the problem however is is that all the folders have 0 bytes and do not have any subfolders. I can only see the folders in the root. ps. I also checked a similar question and tried what is described in this answer http://askubuntu.com/a/88630/27480

  Read the article

• WPD MTP data stream hanging on Release

  - by Jonathan Potter

  I've come across a weird problem when reading data from a MTP-compatible mobile device using the WPD (Windows Portable Devices) API, under Windows 8 (not tried any other Windows versions yet). The symptom is, when calling Release on an IStream interface obtained via the IPortableDeviceResources::GetStream function, occasionally the Release call will hang and not return until the device is disconnected from the PC. After some experimentation I've discovered that this never happens as long as the entire contents of the stream have been read. But if the stream has only been partially read (say, the first 256Kb of the file), it can happen seemingly at random (although quite frequently). This has been reproduced with an iPhone and a Windows Phone 8 mobile, so it does not seem to be device-specific. Has anyone come across this sort of issue before? And more importantly, does anyone know of a way to solve it other than by always reading the entire contents of the stream? Thanks!

  Read the article

• Problems, connecting Android ICS to Ubuntu using MTP

  - by ubuntico

  I've followed this tutorial from this blog which very clearly explains how to connect Android phone with ICS to Ubuntu so that one can access phone's sdcard (MTP access). I passed all the procedure with no errors, I can event attach my mobile to ubuntu via mtpfs -o allow_other ~/Android/GalaxyS2 and disconnect via fusermount -u ~/Android/GalaxyS2 The problem comes when I try to access mounted directory. If I try to do it via Nautilus, the system tries to open the folder for a couple of minutes and then, I either see the error, or the folder disappears from Nautilus (it comes back when I disconnect the path). I also get a console error: fuse: bad mount point `~/Android/GalaxyS2': Transport endpoint is not connected I see many people on the net reporting this error, but noone offers any solution to it. I use Ubuntu 11.10 with Gnome Shell (Gnome 3) and the mobile is Samsung Galaxy S II. I am in the fuse list, I did all the steps in the tutorial for dozens of times, all in vain.

  Read the article

• How can I get the Creative Zen Touch to work?

  - by Hello71

  I've tried using gnomad2 (too lazy to configure all the dependencies) and Amarok (segfaulted when I tried to do anything with it). $ lsusb Bus 002 Device 004: ID 041e:4131 Creative Technology, Ltd Zen Touch (mtp) # SNIP OUTPUT # $ lsusb --verbose -s 002:004 Bus 002 Device 004: ID 041e:4131 Creative Technology, Ltd Zen Touch (mtp) Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x041e Creative Technology, Ltd idProduct 0x4131 Zen Touch (mtp) bcdDevice 1.00 iManufacturer 1 Creative Technology Ltd iProduct 2 Creative Zen Touch iSerial 3 010125517D039098 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 39 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 16 Configuration 1 bmAttributes 0xc0 Self Powered MaxPower 440mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 0 (Defined at Interface level) bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 33 MTP Interface Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 4 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 can't get debug descriptor: Connection timed out Device Status: 0x0000 (Bus Powered)

  Read the article

• Connecting Galaxy Note: Unable to mount Android Error initializing camera: -53: Could not claim the USB device

  - by Claudiu

  I'm running cm9 ics on my Galaxy Note and i tried anything i could find googleing around but to no result, if i look on the phone in usb settings there is the option for mass storage but it's grey and therefore not selectable I don`t know what the problem is but i saw somwhere that it might be an old version of libmtp so i tried to install libmtp 1.1.3 with ./configure make make install but even after when i try mtp-detect it gives me libmtp 1.1.1 is it normal? anyway when i run mtp-detect here is what it gives me libmtp version: 1.1.1 Listing raw device(s) Device 0 (VID=04e8 and PID=6860) is a Samsung GT-P7310/P7510/N7000/I9100/Galaxy Tab 7.7/10.1/S2/Nexus/Note. Found 1 device(s): Samsung: GT-P7310/P7510/N7000/I9100/Galaxy Tab 7.7/10.1/S2/Nexus/Note (04e8:6860) @ bus 2, dev 6 Attempting to connect device(s) ignoring usb_claim_interface = -99PTP_ERROR_IO: failed to open session, trying again after resetting USB interface LIBMTP libusb: Attempt to reset device ignoring usb_claim_interface = -99LIBMTP PANIC: failed to open session on second attempt Unable to open raw device 0 OK. Thanks in advamce

  Read the article

• Windows Phone 8 detected as mass storage

  - by legends2k

  From version 8 onwards Windows Phone supports MTP (media transfer protocol) to transfer audio and I thought I could use Rhythmbox to upload music onto my device. Thing is Rhythmbox doesn't display the device under Devices pane (there's no Device pane for that matter). I searched other questions here and tried out installing mtp-tools, mtpfs and also tried gMTP, which doesn't seem to detect the device as a portable player. I see that the device's icon looks like a Camera in dash bar and when I see the address location, it shows gphoto2://[usb:002,013]/, which makes me doubt that it's detected as a camera or as a mass storage device. /.gvfs/gphoto2 mount on usb%3A002,003 is where the actual mount is. What do I do to fix this? I tried creating .is_audio_player too.

  Read the article

• Connecting a Samsung Galaxy S3 in Ubuntu 13.04

  - by Squishy

  In 13.04, whenever I connect an Android device, one of three things happens: 1 . It mounts successfully (maybe once out of 3 attempts) 2 . It fails to mount with the following error message: Oops! Something went wrong. Unhandled error message: Unable to open MTP device 3 . This one occasionally happens: Unhandled error message: No such interface `org.gtk.vfs.Mount' on object at path /org/gtk/vfs/mount/1 Regardless of activity (even when successfully mounted) it will continuously spam the following error message: Unable to mount SAMSUNG_Android Unable to open MTP Device '[usb:003,00x]' where x seems to be an arbitrary number below 10 and continues counting up with each new error message until the device is unplugged. I've also just noticed that even if it mounts successfully, it unmounts after about 30 seconds and starts spamming the error message above. The Android device is unlocked, always on and fully charged. ADB seems to function normally. Any suggestions? Further info: this happens on both a stock Samsung S3 and an Xperia Arc S running a custom AOSP based ROM. I've also tried the steps outlined in this Stack Overflow answer, but the problem persists. UPDATE: After doing a dist-upgrade (May 8th 2013), the Xperia Arc S on AOSP ROM now mounts and behaves normally. The S3, however, still behaves as described above. UPDATE: After careful observation, ABD does not, in fact, behave normally. If the error message above appears while sending an app to the device, the attempt is aborted with an error message saying that the device is unavailable.

  Read the article

• How can I Connect My Nokia C6-01 to any music player?

  - by iasi

  I have a problem with Ubuntu 11.10. I can connect my Nokia C6-01 as a Massive Storage and Ubuntu will recognize it like a flash drive. But when I try to use Songbird, Rhythmbox, GMusic Browser and Amarok they arent even detecting it. I checked the add ons in everyone of them and they all have the mtp one. I want to be able to synchronize without problems my phone´s music but it´s so annoying to drag and drop my music and podcasts.

  Read the article

• Ubuntu 14.04 and Android, can't see phone on my computer

  - by user3527983

  I have installed gMTP and tried to follow this tutorial to solve this problem: http://www.webupd8.org/2013/01/upgrade-to-gvfs-with-mtp-support-in.html But neither worked. I tried to connect both my phone (Nexus 4) and my dad's phone (Galaxy Note 2), and neither is being detected by Ubuntu. They don't show up on my files and on gMTP. Is there another fix? or something more specific for Android 4.3 and Ubuntu 14.04

  Read the article

• How do I mount an HP Touchpad (Cyanogen Mod 9)?

  - by C.Werthschulte

  I've recently installed Cyanogen Mod 9 on my HP Touchpad tablet, but I'm encountering problems when trying to access it from my Ubuntu laptop (Ubuntu 11.10, Gnome-Shell, Nautilus). I've first tried accessing it via PTP as suggested here. Ubuntu will recognize the Touchpad as a digicam and only grant me access to two directories: "DCIM" and "Pictures". I then tried accessing the tablet via MTP using this post on OMGUbuntu!. Ubuntu will connect to the tablet, but only grant me access to a folder named "Playlists". I'm a bit clueless as to what I'm doing wrong and would very much appreciate any help or hints. Many thanks!

  Read the article

• Sharing files with Android devices (How do I mount an HP Touchpad, Cyanogen Mod 9?)

  - by C.Werthschulte

  I've recently installed Cyanogen Mod 9 on my HP Touchpad tablet, but I'm encountering problems when trying to access it from my Ubuntu laptop (Ubuntu 11.10, Gnome-Shell, Nautilus). I've first tried accessing it via PTP as suggested here. Ubuntu will recognize the Touchpad as a digicam and only grant me access to two directories: "DCIM" and "Pictures". I then tried accessing the tablet via MTP using this post on OMGUbuntu!. Ubuntu will connect to the tablet, but only grant me access to a folder named "Playlists". I'm a bit clueless as to what I'm doing wrong and would very much appreciate any help or hints. Many thanks!

  Read the article

• I am trying to build libmtp 1.1.14 but I cannot fix this error

  - by Kristoffer

  I have run this in a terminal. git clone git://libmtp.git.sourceforge.net/gitroot/libmtp/libmtp cd libmtp ./autogen.sh (answering yes to all questions) But when I try to run the ./configure --prefix=/usr/ I get this error: checking whether to build static libraries... yes ./configure: line 11739: AC_LIB_PREPARE_PREFIX: command not found ./configure: line 11740: AC_LIB_RPATH: command not found ./configure: line 11745: syntax error near unexpected token `iconv' ./configure: line 11745: ` AC_LIB_LINKFLAGS_BODY(iconv)' I have built and installed the libiconv from here. I do not know what to do, been trying for a few hours but I am pretty noob to Linux. How can i fix this? The lines 11739 to 11745 in the configure file looks like this: AC_LIB_PREPARE_PREFIX AC_LIB_RPATH AC_LIB_LINKFLAGS_BODY(iconv)

  Read the article

• How can I install the latest version of libmtp?

  - by coversnail

  In the latest version of the libmtp library there are fixes for my Android device so I would like to install the latest version I'm just not sure how! I would assume that this would pushed into the official repositories at some point, so the smart advice would probably be just to wait, but I would like to know how to do this myself if anyone could tell me. I'm currently using Ubuntu 12.04 and am running libmtp-1.1.2, the latest version (libmtp-1.1.3) has recently been released and the tar.gz file is downloadable from this direct link: http://downloads.sourceforge.net/project/libmtp/libmtp/1.1.3/libmtp-1.1.3.tar.gz How do I install this? Thanks for any help.

  Read the article

• How do I connect a Nexus 7 to transfer files?

  - by gotqn

  I want to move some files from my PC to Nexus 7. The tablet is connected to my PC's USB port and it is successfully charging. Unfortunately, the PC is not detecting the devices - what I expected is to be shown the Nexus 7 tablet as external devices (like my USB flash memory). As the tablet is connected to the my home internet network, I have checked if it will appear in the "Networks" section but it does not. I am using Ubuntu 12.4 LTS. Is there a easy way to connect the devices to my PC and move some information between them?

  Read the article

• copy files to Nexus 4 on Kubuntu (13.04)

  - by cerr

  I know, this has been asked a few times already but I'm still having troubles to get files copied my new Nexus 4 phone mounted on my Kubuntu 13.04 machine. I followed the guide at: http://www.pocketables.com/2013/03/how-to-mount-the-lg-nexus-4-as-a-usb-drive-in-linux.html I would only get: $ cp -r /mnt/media/Albums/A\ Perfect\ Circle\ -\ Thirteenth\ Step/ . cp: accessing ‘.’: Transport endpoint is not connected reg@regDesktopHome:/media/nexus4/Internal storage/Music$ ls -l but thereafter , mount still shows it mounted: mtpfs on /media/nexus4 type fuse.mtpfs (rw,nosuid,nodev,allow_other) What's going on here? Thanks for the assistance!

  Read the article

• Alternative to WMP for mp3 player sync

  - by Dan Neely

  I've been using WMP to sync to my Creative Zen since I bought it a year ago. It worked fine when my collection was still smaller than its capacity, but that's no longer the case, and I can't find any way to specify which music should be synced/not synced. WMP's sync by alphabetical order is an unacceptable option. What I think I want is something that would show my collection organized by artist/album/song (with file size info) in a treeview with checkboxes that saves my selections so I just have make adjustments as needed with new albums instead of having to rebuild my list from scratch every time.

  Read the article

• Why does MTP work on one machine, but not another?

  - by bobmcn

  I have two Dell computers, a laptop and a desktop. I reinstalled Windows XP home on both, from the same CD. Then I installed Service pack 3 and ran windows update. When I connect my Creative Zen media player to the desktop, the MTP software that is part of XP recognizes it, and I can copy file to and from it using Windows Explorer. But when I connect the same player with the same cable to the laptop, I can see it in Windows Explorer, but none of the folders that are visible via the desktop are available, and I can't copy anything to or from it. How can I get this working on the laptop?

  Read the article

• external USB HD doesn't show up on 'sudo fdisk -l' on one Ubuntu, shows up on another (both 'precise')

  - by Menelaos

  I have a 1.5TB WD external USB HDD and two Ubuntu systems, both 'precise'. When I plug the disk on system A it doesn't show up on the output of sudo fdisk -l nor is it automatically mounted (note that that wasn't always the case - it used to appear in the past). When I plug it on system B (again Ubuntu precise) it shows up when I do a sudo fdisk -l (output appended at the end) and mounts automatically just fine. What does this discrepancy point to and what kind of diagnostics should I run / tools I should use to troubleshoot the problem? I followed the suggestion I received to do a sudo tail -f /var/log/syslog and the output is the following when I plug, unplug and replug the USB cable on System A: Sep 14 23:27:09 thorin mtp-probe: checking bus 2, device 3: "/sys/devices/pci0000:00/0000:00:13.2/usb2/2-2" Sep 14 23:27:09 thorin mtp-probe: bus: 2, device: 3 was not an MTP device Sep 14 23:28:01 thorin kernel: [ 338.994295] usb 2-2: USB disconnect, device number 3 Sep 14 23:28:04 thorin kernel: [ 341.808139] usb 2-2: new high-speed USB device number 4 using ehci_hcd Sep 14 23:28:04 thorin mtp-probe: checking bus 2, device 4: "/sys/devices/pci0000:00/0000:00:13.2/usb2/2-2" Sep 14 23:28:04 thorin mtp-probe: bus: 2, device: 4 was not an MTP device Sep 14 23:29:54 thorin AptDaemon: INFO: Quitting due to inactivity Sep 14 23:29:54 thorin AptDaemon: INFO: Quitting was requested (I guess the last two message are irrelevant). Output of sudo fdisk -l on System B $ sudo fdisk -l Disk /dev/sda: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00070db4 Device Boot Start End Blocks Id System /dev/sda1 * 2048 2905114623 1452556288 83 Linux /dev/sda2 2905116670 2930276351 12579841 5 Extended /dev/sda5 2905116672 2930276351 12579840 82 Linux swap / Solaris Disk /dev/sdb: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9c849c84 Device Boot Start End Blocks Id System /dev/sdb1 * 63 488375999 244187968+ 7 HPFS/NTFS/exFAT Disk /dev/sdg: 1500.3 GB, 1500299395072 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930272256 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0003e17f Device Boot Start End Blocks Id System /dev/sdg1 2048 2930272255 1465135104 7 HPFS/NTFS/exFAT

  Read the article

• Using a portable USB monitor in Ubuntu 13.04 (AOC e1649Fwu - DisplayLink)

  Having access to a little bit of IT hardware extravaganza isn't that easy here in Mauritius for exactly two reasons - either it is simply not available or it is expensive like nowhere. Well, by chance I came across an advert by a local hardware supplier and their offer of the week caught my attention - a portable USB monitor. Sounds cool, and the specs are okay as well. It's completely driven via USB 2.0, has a light weight, the dimensions would fit into my laptop bag and the resolution of 1366 x 768 pixels is okay for a second screen. Long story, short ending: I called them and only got to understand that they are out of stock - how convenient! Well, as usual I left some contact details and got the regular 'We call you back' answer. Surprisingly, I didn't receive a phone call as promised and after starting to complain via social media networks they finally came back to me with new units available - and *drum-roll* still the same price tag as promoted (and free delivery on top as one of their employees lives in Flic en Flac). Guess, it was a no-brainer to get at least one unit to fool around with. In worst case it might end up as image frame on the shelf or so... The usual suspects... Ubuntu first! Of course, the packing mentions only Windows or Mac OS as supported operating systems and without hesitation at all, I hooked up the device on my main machine running on Ubuntu 13.04. Result: Blackout... Hm, actually not the situation I was looking for but okay can't be too difficult to get this piece of hardware up and running. Following the output of syslogd (or dmesg if you prefer) the device has been recognised successfully but we got stuck in the initialisation phase. Oct 12 08:17:23 iospc2 kernel: [69818.689137] usb 2-4: new high-speed USB device number 5 using ehci-pciOct 12 08:17:23 iospc2 kernel: [69818.800306] usb 2-4: device descriptor read/64, error -32Oct 12 08:17:24 iospc2 kernel: [69819.043620] usb 2-4: New USB device found, idVendor=17e9, idProduct=4107Oct 12 08:17:24 iospc2 kernel: [69819.043630] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3Oct 12 08:17:24 iospc2 kernel: [69819.043636] usb 2-4: Product: e1649FwuOct 12 08:17:24 iospc2 kernel: [69819.043642] usb 2-4: Manufacturer: DisplayLinkOct 12 08:17:24 iospc2 kernel: [69819.043647] usb 2-4: SerialNumber: FJBD7HA000778Oct 12 08:17:24 iospc2 kernel: [69819.046073] hid-generic 0003:17E9:4107.0008: hiddev0,hidraw5: USB HID v1.10 Device [DisplayLink e1649Fwu] on usb-0000:00:1d.7-4/input1Oct 12 08:17:24 iospc2 mtp-probe: checking bus 2, device 5: "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-4"Oct 12 08:17:24 iospc2 mtp-probe: bus: 2, device: 5 was not an MTP deviceOct 12 08:17:30 iospc2 kernel: [69825.411220] [drm] vendor descriptor length:17 data:17 5f 01 00 15 05 00 01 03 00 04Oct 12 08:17:30 iospc2 kernel: [69825.498778] udl 2-4:1.0: fb1: udldrmfb frame buffer deviceOct 12 08:17:30 iospc2 kernel: [69825.498786] [drm] Initialized udl 0.0.1 20120220 on minor 1Oct 12 08:17:30 iospc2 kernel: [69825.498909] usbcore: registered new interface driver udl The device has been recognised as USB device without any question and it is listed properly: # lsusb...Bus 002 Device 005: ID 17e9:4107 DisplayLink ... A quick and dirty research on the net gave me some hints towards the udlfb framebuffer device for USB DisplayLink devices. By default this kernel module is blacklisted $ less /etc/modprobe.d/blacklist-framebuffer.conf | grep udl#blacklist udlblacklist udlfb and it is recommended to load it manually. So, unloading the whole udl stack and giving udlfb a shot: Oct 12 08:22:31 iospc2 kernel: [70126.642809] usbcore: registered new interface driver udlfb But still no reaction on the external display which supposedly should have been on and green. Display okay? Test run on Windows Just to be on the safe side and to exclude any hardware related defects or whatsoever - you never know what happened during delivery. I moved the display to a new position on the opposite side of my laptop, installed the display drivers first in Windows Vista (I know, I know...) as recommended in the manual, and then finally hooked it up on that machine. Tada! Display has been recognised correctly and I have a proper choice between cloning and extending my desktop. Testing whether the display is working properly - using Windows Vista Okay, good to know that there is nothing wrong on the hardware side just software... Back to Ubuntu - Kernel too old Some more research on Google and various hits recommend that the original displaylink driver has been merged into the recent kernel development and one should manually upgrade the kernel image (and both header) packages for Ubuntu. At least kernel 3.9 or higher would be necessary, and so I went out to this URL: http://kernel.ubuntu.com/~kernel-ppa/mainline/ and I downloaded all the good stuff from the v3.9-raring directory. The installation itself is easy going via dpkg: $ sudo dpkg -i linux-image-3.9.0-030900-generic_3.9.0-030900.201304291257_amd64.deb$ sudo dpkg -i linux-headers-3.9.0-030900_3.9.0-030900.201304291257_all.deb$ sudo dpkg -i linux-headers-3.9.0-030900-generic_3.9.0-030900.201304291257_amd64.deb As with any kernel upgrades it is necessary to restart the system in order to use the new one. Said and done: $ uname -r3.9.0-030900-generic And now connecting the external display gives me the following output in /var/log/syslog: Oct 12 17:51:36 iospc2 kernel: [ 2314.984293] usb 2-4: new high-speed USB device number 6 using ehci-pciOct 12 17:51:36 iospc2 kernel: [ 2315.096257] usb 2-4: device descriptor read/64, error -32Oct 12 17:51:36 iospc2 kernel: [ 2315.337105] usb 2-4: New USB device found, idVendor=17e9, idProduct=4107Oct 12 17:51:36 iospc2 kernel: [ 2315.337115] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3Oct 12 17:51:36 iospc2 kernel: [ 2315.337122] usb 2-4: Product: e1649FwuOct 12 17:51:36 iospc2 kernel: [ 2315.337127] usb 2-4: Manufacturer: DisplayLinkOct 12 17:51:36 iospc2 kernel: [ 2315.337132] usb 2-4: SerialNumber: FJBD7HA000778Oct 12 17:51:36 iospc2 kernel: [ 2315.338292] udlfb: DisplayLink e1649Fwu - serial #FJBD7HA000778Oct 12 17:51:36 iospc2 kernel: [ 2315.338299] udlfb: vid_17e9&pid_4107&rev_0129 driver's dlfb_data struct at ffff880117e59000Oct 12 17:51:36 iospc2 kernel: [ 2315.338303] udlfb: console enable=1Oct 12 17:51:36 iospc2 kernel: [ 2315.338306] udlfb: fb_defio enable=1Oct 12 17:51:36 iospc2 kernel: [ 2315.338309] udlfb: shadow enable=1Oct 12 17:51:36 iospc2 kernel: [ 2315.338468] udlfb: vendor descriptor length:17 data:17 5f 01 0015 05 00 01 03 00 04Oct 12 17:51:36 iospc2 kernel: [ 2315.338473] udlfb: DL chip limited to 1500000 pixel modesOct 12 17:51:36 iospc2 kernel: [ 2315.338565] udlfb: allocated 4 65024 byte urbsOct 12 17:51:36 iospc2 kernel: [ 2315.343592] hid-generic 0003:17E9:4107.0009: hiddev0,hidraw5: USB HID v1.10 Device [DisplayLink e1649Fwu] on usb-0000:00:1d.7-4/input1Oct 12 17:51:36 iospc2 mtp-probe: checking bus 2, device 6: "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-4"Oct 12 17:51:36 iospc2 mtp-probe: bus: 2, device: 6 was not an MTP deviceOct 12 17:51:36 iospc2 kernel: [ 2315.426583] udlfb: 1366x768 @ 59 Hz valid modeOct 12 17:51:36 iospc2 kernel: [ 2315.426589] udlfb: Reallocating framebuffer. Addresses will change!Oct 12 17:51:36 iospc2 kernel: [ 2315.428338] udlfb: 1366x768 @ 59 Hz valid modeOct 12 17:51:36 iospc2 kernel: [ 2315.428343] udlfb: set_par mode 1366x768Oct 12 17:51:36 iospc2 kernel: [ 2315.430620] udlfb: DisplayLink USB device /dev/fb1 attached. 1366x768 resolution. Using 4104K framebuffer memory Okay, that's looks more promising but still only blackout on the external screen... And yes, due to my previous modifications I swapped the blacklisted kernel modules: $ less /etc/modprobe.d/blacklist-framebuffer.conf | grep udlblacklist udl#blacklist udlfb Silly me! Okay, back to the original situation in which udl is allowed and udlfb blacklisted. Now, the logging looks similar to this and the screen shows those maroon-brown and azure-blue horizontal bars as described on other online resources. Oct 15 21:27:23 iospc2 kernel: [80934.308238] usb 2-4: new high-speed USB device number 5 using ehci-pciOct 15 21:27:23 iospc2 kernel: [80934.420244] usb 2-4: device descriptor read/64, error -32Oct 15 21:27:24 iospc2 kernel: [80934.660822] usb 2-4: New USB device found, idVendor=17e9, idProduct=4107Oct 15 21:27:24 iospc2 kernel: [80934.660832] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3Oct 15 21:27:24 iospc2 kernel: [80934.660838] usb 2-4: Product: e1649FwuOct 15 21:27:24 iospc2 kernel: [80934.660844] usb 2-4: Manufacturer: DisplayLinkOct 15 21:27:24 iospc2 kernel: [80934.660850] usb 2-4: SerialNumber: FJBD7HA000778Oct 15 21:27:24 iospc2 kernel: [80934.663391] hid-generic 0003:17E9:4107.0008: hiddev0,hidraw5: USB HID v1.10 Device [DisplayLink e1649Fwu] on usb-0000:00:1d.7-4/input1Oct 15 21:27:24 iospc2 mtp-probe: checking bus 2, device 5: "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-4"Oct 15 21:27:24 iospc2 mtp-probe: bus: 2, device: 5 was not an MTP deviceOct 15 21:27:25 iospc2 kernel: [80935.742407] [drm] vendor descriptor length:17 data:17 5f 01 00 15 05 00 01 03 00 04Oct 15 21:27:25 iospc2 kernel: [80935.834403] udl 2-4:1.0: fb1: udldrmfb frame buffer deviceOct 15 21:27:25 iospc2 kernel: [80935.834416] [drm] Initialized udl 0.0.1 20120220 on minor 1Oct 15 21:27:25 iospc2 kernel: [80935.836389] usbcore: registered new interface driver udlOct 15 21:27:25 iospc2 kernel: [80936.021458] [drm] write mode info 153 Next, it's time to enable the display for our needs... This can be done either via UI or console, just as you'd prefer it. Adding the external USB display under Linux isn't an issue after all... Settings Manager => Display Personally, I like the console. With the help of xrandr we get the screen identifier first $ xrandrScreen 0: minimum 320 x 200, current 3200 x 1080, maximum 32767 x 32767LVDS1 connected 1280x800+0+0 (normal left inverted right x axis y axis) 331mm x 207mm...DVI-0 connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 193mm   1366x768       60.0*+ and then give it the usual shot with auto-configuration. Let the system decide what's best for your hardware... $ xrandr --output DVI-0 --off$ xrandr --output DVI-0 --auto And there we go... Cloned output of main display: New kernel, new display... The external USB display works out-of-the-box with a Linux kernel > 3.9.0. Despite of a good number of resources it is absolutely not necessary to create a Device or Screen section in one of Xorg.conf files. This information belongs to the past and is not valid on kernel 3.9 or higher. Same hardware but Windows 8 Of course, I wanted to know how the latest incarnation from Redmond would handle the new hardware... Flawless! Most interesting aspect here: I did not use the driver installation medium on purpose. And I was right... not too long afterwards a dialog with the EULA of DisplayLink appeared on the main screen. And after confirmation of same it took some more seconds and the external USB monitor was ready to rumble. Well, and not only that one... but see for yourself. This time Windows 8 was the easiest solution after all. Resume I can highly recommend this type of hardware to anyone asking me. Although, it's dimensions are 15.6" it is actually lighter than my Samsung Galaxy Tab 10.1 and it still fits into my laptop bag without any issues. From now on... no more single screen while developing software on the road!

  Read the article

• Mouse takes a while to start working after boot

  - by warkior

  I just recently installed Ubuntu 12.04 (64 bit) and a number of my USB devices have stopped working. At least, they don't work for the first 3-5 minutes. I have two mice (one wireless, one wired) and a camera, which seem to take Ubuntu 3-5 minutes to recognize after booting up. Eventually, they do start to work, but it takes ages! lsusb results: (when the mice are working...) $ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 046d:c512 Logitech, Inc. LX-700 Cordless Desktop Receiver Bus 003 Device 003: ID 03f0:3f11 Hewlett-Packard PSC-1315/PSC-1317 Bus 006 Device 002: ID 046d:c00c Logitech, Inc. Optical Wheel Mouse Bus 006 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver syslog entries for what seems (to my very untrained eye) to be the problem: Oct 12 20:12:51 REMOVED-GA-MA785GM-US2H kernel: [ 17.420117] usb 2-3: device descriptor read/64, error -110 Oct 12 20:12:57 REMOVED-GA-MA785GM-US2H goa[1879]: goa-daemon version 3.4.0 starting [main.c:112, main()] Oct 12 20:13:06 REMOVED-GA-MA785GM-US2H kernel: [ 32.636107] usb 2-3: device descriptor read/64, error -110 Oct 12 20:13:06 REMOVED-GA-MA785GM-US2H kernel: [ 32.852122] usb 2-3: new high-speed USB device number 3 using ehci_hcd Oct 12 20:13:21 REMOVED-GA-MA785GM-US2H kernel: [ 47.964131] usb 2-3: device descriptor read/64, error -110 Oct 12 20:13:37 REMOVED-GA-MA785GM-US2H kernel: [ 63.180115] usb 2-3: device descriptor read/64, error -110 Oct 12 20:13:37 REMOVED-GA-MA785GM-US2H kernel: [ 63.396126] usb 2-3: new high-speed USB device number 4 using ehci_hcd Oct 12 20:13:47 REMOVED-GA-MA785GM-US2H kernel: [ 73.804158] usb 2-3: device not accepting address 4, error -110 Oct 12 20:13:47 REMOVED-GA-MA785GM-US2H kernel: [ 73.916190] usb 2-3: new high-speed USB device number 5 using ehci_hcd Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H kernel: [ 84.324160] usb 2-3: device not accepting address 5, error -110 Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H kernel: [ 84.324197] hub 2-0:1.0: unable to enumerate USB device on port 3 Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H udev-configure-printer: failed to claim interface Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H udev-configure-printer: Failed to get parent Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H udev-configure-printer: device devpath is /devices/pci0000:00/0000:00:12.0/usb3/3-3 Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H udev-configure-printer: MFG:hp MDL:psc 1310 series SERN:CN47CB60BJO2 serial:CN47CB60BJO2 Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H kernel: [ 84.768132] usb 5-3: new full-speed USB device number 2 using ohci_hcd Oct 12 20:14:01 REMOVED-GA-MA785GM-US2H udev-configure-printer: no corresponding CUPS device found Oct 12 20:14:13 REMOVED-GA-MA785GM-US2H kernel: [ 99.904185] usb 5-3: device descriptor read/64, error -110 Oct 12 20:14:29 REMOVED-GA-MA785GM-US2H kernel: [ 115.144188] usb 5-3: device descriptor read/64, error -110 Oct 12 20:14:29 REMOVED-GA-MA785GM-US2H kernel: [ 115.384178] usb 5-3: new full-speed USB device number 3 using ohci_hcd Oct 12 20:14:44 REMOVED-GA-MA785GM-US2H kernel: [ 130.520196] usb 5-3: device descriptor read/64, error -110 Oct 12 20:14:59 REMOVED-GA-MA785GM-US2H kernel: [ 145.760179] usb 5-3: device descriptor read/64, error -110 Oct 12 20:14:59 REMOVED-GA-MA785GM-US2H kernel: [ 146.000173] usb 5-3: new full-speed USB device number 4 using ohci_hcd Oct 12 20:15:10 REMOVED-GA-MA785GM-US2H kernel: [ 156.408168] usb 5-3: device not accepting address 4, error -110 Oct 12 20:15:10 REMOVED-GA-MA785GM-US2H kernel: [ 156.544188] usb 5-3: new full-speed USB device number 5 using ohci_hcd Oct 12 20:15:20 REMOVED-GA-MA785GM-US2H kernel: [ 166.952181] usb 5-3: device not accepting address 5, error -110 Oct 12 20:15:20 REMOVED-GA-MA785GM-US2H kernel: [ 166.952215] hub 5-0:1.0: unable to enumerate USB device on port 3 Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.216164] usb 6-2: new low-speed USB device number 2 using ohci_hcd Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H mtp-probe: checking bus 6, device 2: "/sys/devices/pci0000:00/0000:00:13.1/usb6/6-2" Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H mtp-probe: bus: 6, device: 2 was not an MTP device Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.396138] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/input/input16 Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.396442] generic-usb 0003:046D:C00C.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:13.1-2/input0 Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.660187] usb 6-3: new full-speed USB device number 3 using ohci_hcd Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H mtp-probe: checking bus 6, device 3: "/sys/devices/pci0000:00/0000:00:13.1/usb6/6-3" Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H mtp-probe: bus: 6, device: 3 was not an MTP device Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.859045] logitech-djreceiver 0003:046D:C52B.0006: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.1-3/input2 Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.865086] input: Logitech Unifying Device. Wireless PID:400a as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.2/0003:046D:C52B.0006/input/input17 Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.865291] logitech-djdevice 0003:046D:C52B.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:400a] on usb-0000:00:13.1-3:1 Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 139: unable get_string_descriptor -1: Operation not permitted Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 2040: invalid product id string ret=-1 Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 139: unable get_string_descriptor -1: Operation not permitted Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 2045: invalid serial id string ret=-1 Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 139: unable get_string_descriptor -1: Operation not permitted Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 2050: invalid manufacturer string ret=-1

  Read the article

• System does not detect USB pendrives

  - by cshubhamrao

  This USB thing is driving me crazy. 2 problems in time span of 3 hours. Ok I was already trying to cope up with "wrong fs type, bad option, bad superblock" error while mounting FAT Drives when to my amazement I discovered that none of the USB Storage devices showed up in the system Useful outputs: - tail /var/log/syslog: root@shubham-pc:~# tail /var/log/syslog Nov 7 21:41:47 shubham-pc colord: device removed: sysfs-HP-v250w Nov 7 21:41:51 shubham-pc kernel: [ 3441.529542] usb 1-1: USB disconnect, device number 11 Nov 7 21:41:53 shubham-pc kernel: [ 3443.820029] usb 1-2: new high-speed USB device number 14 using ehci-pci Nov 7 21:41:54 shubham-pc kernel: [ 3443.952897] usb 1-2: New USB device found, idVendor=0781, idProduct=5530 Nov 7 21:41:54 shubham-pc kernel: [ 3443.952905] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Nov 7 21:41:54 shubham-pc kernel: [ 3443.952909] usb 1-2: Product: Cruzer Nov 7 21:41:54 shubham-pc kernel: [ 3443.952913] usb 1-2: Manufacturer: SanDisk Nov 7 21:41:54 shubham-pc kernel: [ 3443.952917] usb 1-2: SerialNumber: 20060876420EC6016847 Nov 7 21:41:54 shubham-pc mtp-probe: checking bus 1, device 14: "/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-2" Nov 7 21:41:54 shubham-pc mtp-probe: bus: 1, device: 14 was not an MTP device

  Read the article

1 2 3  | Next Page >