Search Results

Search found 65 results on 3 pages for 'muahmmad nadeem'.

Page 1/3 | 1 2 3  | Next Page >

  • System reverts to 87Hz refresh rate at every startup after I have installed nvidia drivers

    - by Mohammad Kamil Nadeem
    Every time the system starts the screen's refresh rate reverts to 87Hz which results in a pixelated and flickery screen which I have to manually correct every time by either selecting 60Hz as my refresh rate. I have tried "save to X configuration files" and even tried by making the changes as Root but to no avail as it again reverts to 87Hz on every system startup The Open Source Drivers are Okay for regular Unity but many games don't work on it hence I had to install the nvidia drivers. I have been facing this since the Beta Phase although this is on a fresh installation of 12.04 final release. I am also providing my Xorg.conf file just in case it might help http://paste.ubuntu.com/952196/ Also for some reason Displays shows my CRT monitor as Laptop but on open source drivers it was mentioning it as a 14" CRT only This bug is also present on Edubuntu 12.04 This is not present on Xubuntu 12.04 I had selected to install updates and 3rd party software on the install and was greeted with a correct refresh rate screen on the Boot Up. I like Xubuntu.

    Read the article

  • Poor System performance on my machine running Ubuntu 12.04(Beta 2 updated to the present moment)

    - by Mohammad Kamil Nadeem
    Why is it that my system dies when multitasking(it is happening from 11.10) on Ubuntu11.10(Unity), Kubuntu 11.10(KDE) and Deepin Linux which is based on 11.10(Gnome-Shell) The thing is that I thought with 12.04 I would get performance like I used to get on 11.04 on which everything used to run fine without any lag or hiccups. The same lagging(Browser starts to stutter, increased delay in the launching of dash and applications)is happening on 12.04 http://i.imgur.com/YChKB.png and http://i.imgur.com/uyXLA.png . I believe that my system configuration is sufficient for running Ubuntu as you can check here http://paste.ubuntu.com/929734/ . I had the Google voice and chat plugin installed on 12.04 so someone suggested that I should remove that and see if the performance improves but no such respite(I am having this on multiple operating system based on Ubuntu 11.10 as I have mentioned above). On a friends suggestion Ran Memory Test through Partition Magic and my system passed that fine. One thing more that I would like to know is that why when I have 2Gb Ram and 2.1GB swap does my system starts lag and run poorly when Ram consumption goes 500+. If you require anymore information I will gladly provide it.

    Read the article

  • Migrating data from SQL Server 2000 to SQL Server 2005

    - by Muhammad Kashif Nadeem
    I have to migrate existing data which is in SQL Server 2000 to SQL Server 2005. The schema of two databases is different. For Example Locations table in SS2000 is split into two tables and has different columns. This is one time activity. After successful migration I don't need old db anymore. What is the best way to transfer data from one SQL Server to another having different schemas? I can write stored procedures to fetch data from SQL Server 2000 and insert/update tables in SQL Server 2005. What about SSIS? I don't have any experience with this and is this better to create package of SSIS because I don't need this again and need to learn it first. Thanks.

    Read the article

  • Config file (App.config) does not update on new installation

    - by Muhammad Kashif Nadeem
    I am creating setup of my project using Visula Studio 2008. I am facing problem in setup installation. If I uninstall old setup (application) and install the new one then config file (App.config) updates the attributes (surely it is new file) of config file but if I install new setup without uninstalling the old one then config file does not update. from config file I mean MyProject.exe.config Why is this behavior of config file. Should it not be updated on installation of the new setup Is this possible to delete and copy the config file of new setup? Is there a way to update only config file forcefully during installation. Thanks for your help!

    Read the article

  • After installing VS 2010 - Generic Host Process For Win32 Services problem starts.

    - by Muhammad Kashif Nadeem
    After installing VS 2010 trial I am getting this error "Generic Host Process For Win32 Services Encountered A Problem and needs to close. When this message pops my computer just stuck and I can not even restart it normally. I have found one fix on net but after that fix I can not access my LAN. This fix change these values in registry. HKLM\SYSTEM\CurrentControlSet\Services\netbt\parameters TransportBindName HKLM\Software\Microsoft\OLE EnableDCOM If I revert these registry changes then I again start getting 'Generic Host Process For Win32 Services' I have uninstall VS 2010 but this problem persist. This problem is not because of any virus. Any help to fix this or I have to re install Windows. Thanks.

    Read the article

  • After installing VS 2010 - Generic Host Process For Win32 Services problem starts.

    - by Muhammad Kashif Nadeem
    After installing VS 2010 trial I am getting this error "Generic Host Process For Win32 Services Encountered A Problem and needs to close. When this message pops my computer just stuck and I can not even restart it normally. I have found one fix on net but after that fix I can not access my LAN. This fix change these values in registry. HKLM\SYSTEM\CurrentControlSet\Services\netbt\parameters TransportBindName HKLM\Software\Microsoft\OLE EnableDCOM If I revert these registry changes then I again start getting 'Generic Host Process For Win32 Services' I have uninstall VS 2010 but this problem persist. This problem is not because of any virus. Any help to fix this or I have to re install Windows. Thanks.

    Read the article

  • After installing Windows XP Service Pack 3 - Generic Host Process For Win32 Services problem starts

    - by Muhammad Kashif Nadeem
    After installing Service Pack 3 I am getting this error "Generic Host Process For Win32 Services Encountered A Problem and needs to close. When this message pops my computer just stuck and I can not even restart it normally. The only fix of this problem is to un-install service pack 3 and run fix from Microsoft which is available for Service Pack 2. Any help to fix this. Thanks.

    Read the article

  • After installing Windows XP Service Pack 3 - Generic Host Process For Win32 Services problem starts

    - by Muhammad Kashif Nadeem
    After installing Service Pack 3 I am getting this error "Generic Host Process For Win32 Services Encountered A Problem and needs to close. When this message pops my computer just stuck and I can not even restart it normally. The only fix of this problem is to un-install service pack 3 and run fix from Microsoft which is available for Service Pack 2. Any help to fix this. Thanks.

    Read the article

  • New Best-in-Class Solutions in Supply Chain Planning - Part 2

    Hear Nadeem Syed, Oracle Group Vice President, Advanced Planning Products discusst Oracle's recently announced best-in-class Supply Chain Planning solutions: Advanced Planning Command Center, Demand Signal Repository, Spare Parts Planning and Manufacturing Operations Center. Gain an understanding of the capabilities of these ground-breaking planning solutions and what types of enterprises can benefit from them.

    Read the article

  • New Best-in-Class Solutions in Supply Chain Planning - Part 1

    Hear Nadeem Syed, Oracle Group Vice President, Advanced Planning Products discusst Oracle's recently announced best-in-class Supply Chain Planning solutions: Advanced Planning Command Center, Demand Signal Repository, Spare Parts Planning and Manufacturing Operations Center. Gain an understanding of the capabilities of these ground-breaking planning solutions and what types of enterprises can benefit from them.

    Read the article

  • Cannot find web project item

    - by Nadeem
    I am trying to create a webform. I added a button control on the web form but when i switched to the design mode i got the error: Error creating Button1 Cannot create web project item E:\MyProjects\C#\WebApplication1 Can somebody suggest a solution

    Read the article

  • Create View using Linked Server db in SQL Server

    - by Muhammad Kashif Nadeem
    How can I create View on Linked Server db. For Example I have a linked server [0.0.0.0] on [1.1.1.1]. Both db servers are SQL Sserver 2005. I want to create View on [1.1.1.1] using table on linked server. EDIT: On creating using full name, [0.0.0.0].db.dbo.table, I am getting this error. SQL Execution Error. Executed SQL statement: SELECT * FROM 0.0.0.0.db.dbo.table (YOu can see brackets are not there.) Error Source: .Net SqlClient Data Provider Error Message: Incorrect syntax near '0.0'. --- part of IP address. I am just creating this in ManagementStudio, not using it because it is not created yet. I Have changed IP. In image you can see there are not brackets around IP but I given it and on error these brackets are removed. Thanks.

    Read the article

  • Save data in bulk.

    - by Muhammad Kashif Nadeem
    I have a window having multiple tabs. Each tab having different grids. I want to save all changes on any tab on any grid in bulk. I mean I have one save button which will save all changes in any grid on any tab. I think DataTables will work fine here. Can you suggest me that it is good to use DataTables to ADD/Edit data and save data in bulk using these DataTables OR is there any better way to achieve this. My DAL is generated from LLBLGen Pro (ORM) but you are open to suggest me a solution. Thanks. Edit: I am using Telerik controls so I can get all data in DataTable like DataTable dtProducts = this.radGridView1.DataSource as DataTable;

    Read the article

  • Char error C langauge

    - by Nadeem tabbaa
    i have a project for a course, i did almost everything but i have this error i dont know who to solve it... the project about doing our own shell some of them we have to write our code, others we will use the fork method.. this is the code, #include <sys/wait.h> #include <dirent.h> #include <limits.h> #include <errno.h> #include <stdlib.h> #include <string.h> #include<stdio.h> #include<fcntl.h> #include<unistd.h> #include<sys/stat.h> #include<sys/types.h> int main(int argc, char **argv) { pid_t pid; char str[21], *arg[10]; int x,status,number; system("clear"); while(1) { printf("Rshell>" ); fgets(str,21,stdin); x = 0; arg[x] = strtok(str, " \n\t"); while(arg[x]) arg[++x] = strtok(NULL, " \n\t"); if(NULL!=arg[0]) { if(strcasecmp(arg[0],"cat")==0) //done { int f=0,n; char l[1]; struct stat s; if(x!=2) { printf("Mismatch argument\n"); } /*if(access(arg[1],F_OK)) { printf("File Exist"); exit(1); } if(stat(arg[1],&s)<0) { printf("Stat ERROR"); exit(1); } if(S_ISREG(s.st_mode)<0) { printf("Not a Regular FILE"); exit(1); } if(geteuid()==s.st_uid) if(s.st_mode & S_IRUSR) f=1; else if(getegid()==s.st_gid) if(s.st_mode & S_IRGRP) f=1; else if(s.st_mode & S_IROTH) f=1; if(!f) { printf("Permission denied"); exit(1); }*/ f=open(arg[1],O_RDONLY); while((n=read(f,l,1))>0) write(1,l,n); } else if(strcasecmp(arg[0],"rm")==0) //done { if( unlink( arg[1] ) != 0 ) perror( "Error deleting file" ); else puts( "File successfully deleted" ); } else if(strcasecmp(arg[0],"rmdir")==0) //done { if( remove( arg[1] ) != 0 ) perror( "Error deleting Directory" ); else puts( "Directory successfully deleted" ); } else if(strcasecmp(arg[0],"ls")==0) //done { DIR *dir; struct dirent *dirent; char *where = NULL; //printf("x== %i\n",x); //printf("x== %s\n",arg[1]); //printf("x== %i\n",get_current_dir_name()); if (x == 1) where = get_current_dir_name(); else where = arg[1]; if (NULL == (dir = opendir(where))) { fprintf(stderr,"%d (%s) opendir %s failed\n", errno, strerror(errno), where); return 2; } while (NULL != (dirent = readdir(dir))) { printf("%s\n", dirent->d_name); } closedir(dir); } else if(strcasecmp(arg[0],"cp")==0) //not yet for Raed { FILE *from, *to; char ch; if(argc!=3) { printf("Usage: copy <source> <destination>\n"); exit(1); } /* open source file */ if((from = fopen(argv[1], "rb"))==NULL) { printf("Cannot open source file.\n"); exit(1); } /* open destination file */ if((to = fopen(argv[2], "wb"))==NULL) { printf("Cannot open destination file.\n"); exit(1); } /* copy the file */ while(!feof(from)) { ch = fgetc(from); if(ferror(from)) { printf("Error reading source file.\n"); exit(1); } if(!feof(from)) fputc(ch, to); if(ferror(to)) { printf("Error writing destination file.\n"); exit(1); } } if(fclose(from)==EOF) { printf("Error closing source file.\n"); exit(1); } if(fclose(to)==EOF) { printf("Error closing destination file.\n"); exit(1); } } else if(strcasecmp(arg[0],"mv")==0)//done { if( rename(arg[1],arg[2]) != 0 ) perror( "Error moving file" ); else puts( "File successfully moved" ); } else if(strcasecmp(arg[0],"hi")==0)//done { printf("hello\n"); } else if(strcasecmp(arg[0],"exit")==0) // done { return 0; } else if(strcasecmp(arg[0],"sleep")==0) // done { if(x==1) printf("plz enter the # seconds to sleep\n"); else sleep(atoi(arg[1])); } else if(strcmp(arg[0],"history")==0) // not done { FILE *infile; //char fname[40]; char line[100]; int lcount; ///* Read in the filename */ //printf("Enter the name of a ascii file: "); //fgets(History.txt, sizeof(fname), stdin); /* Open the file. If NULL is returned there was an error */ if((infile = fopen("History.txt", "r")) == NULL) { printf("Error Opening File.\n"); exit(1); } while( fgets(line, sizeof(line), infile) != NULL ) { /* Get each line from the infile */ lcount++; /* print the line number and data */ printf("Line %d: %s", lcount, line); } fclose(infile); /* Close the file */ writeHistory(arg); //write to txt file every new executed command //read from the file once the history command been called //if a command called not for the first time then just replace it to the end of the file } else if(strncmp(arg[0],"@",1)==0) // not done { //scripting files // read from the file command by command and executing them } else if(strcmp(arg[0],"type")==0) //not done { //if(x==1) //printf("plz enter the argument\n"); //else //type((arg[1])); } else { pid = fork( ); if (pid == 0) { execlp(arg[0], arg[0], arg[1], arg[2], NULL); printf ("EXEC Failed\n"); } else { wait(&status); if(strcmp(arg[0],"clear")!=0) { printf("status %04X\n",status); if(WIFEXITED(status)) printf("Normal termination, exit code %d\n", WEXITSTATUS(status)); else printf("Abnormal termination\n"); } } } } } } void writeHistory(char *arg[]) { FILE *file; file = fopen("History.txt","a+"); /* apend file (add text to a file or create a file if it does not exist.*/ int i =0; while(strcasecmp(arg[0],NULL)==0) { fprintf(file,"%s ",arg[i]); /*writes*/ } fprintf(file,"\n"); /*new line*/ fclose(file); /*done!*/ getchar(); /* pause and wait for key */ //return 0; } the thing is when i compile the code, this what it gives me /home/ugics/st255375/ICS431Labs/Project/Rshell.c: At top level: /home/ugics/st255375/ICS431Labs/Project/Rshell.c:264: warning: conflicting types for ‘writeHistory’ /home/ugics/st255375/ICS431Labs/Project/Rshell.c:217: note: previous implicit declaration of ‘writeHistory’ was here can any one help me??? thanks

    Read the article

  • Exception during iteration on collection and remove items from that collection

    - by Muhammad Kashif Nadeem
    I remove item from ArrayList in foreach loop and get follwing exception. Collection was modified; enumeration operation may not execute. How can I remove items in foreach Following is my code: /* * Need to remove all items from 'attachementsFielPath' which does not exist in names array. */ try { string attachmentFileNames = txtAttachment.Text.Trim(); // Textbox having file names. string[] names = attachmentFileNames.Split(new char[] { ';' }); int index = 0; // attachmentsFilePath is ArrayList holding full path of fiels user selected at any time. foreach (var fullFilePath in attachmentsFilePath) { bool isNeedToRemove = true; // Extract filename from full path. string fileName = fullFilePath.ToString().Substring(fullFilePath.ToString().LastIndexOf('\\') + 1); for (int i = 0; i < names.Length; i++) { // If filename found in array then no need to check remaining items. if (fileName.Equals(names[i].Trim())) { isNeedToRemove = false; break; } } // If file not found in names array, remove it. if (isNeedToRemove) { attachmentsFilePath.RemoveAt(index); isNeedToRemove = true; } index++; } } catch (Exception ex) { throw ex; }

    Read the article

  • Creating stored procedure having different WHERE clause on different search criteria without putting

    - by Muhammad Kashif Nadeem
    Is there any alternate way to create stored procedure without putting all query in one long string if criteria of WWHERE clause can be different. Suppose I have Orders table I want to create stored procedure on this table and there are three column on which I wnat to filter records. 1- CustomerId, 2- SupplierId, 3- ProductId. If user only give CustomerId in search criteria then query should be like following SELECT * FROM Orders WHERE Orders.CustomerId = @customerId And if user only give ProductId in search criteria then query should be like following SELECT * FROM Orders WHERE Orders.ProductId = @productId And if user only all three CustomerId, ProductId, and SupplierId is given then all three Ids will be used in WHERE to filter. There is also chance that user don't want to filter record then query should be like following SELCT * FROM Orders Whenever I have to create this kind of procedure I put all this in string and use IF conditions to check if arguments (@customeId or @supplierId etc) has values. I use following method to create procedure DECLARE @query VARCHAR(MAX) DECLARE @queryWhere VARCHAR(MAX) SET @query = @query + 'SELECT * FROM Orders ' IF (@originationNumber IS NOT NULL) BEGIN BEGIN SET @queryWhere =@queryWhere + ' Orders.CustomerId = ' + CONVERT(VARCHAR(100),@customerId) END END IF(@queryWhere <> '') BEGIN SET @query = @query+' WHERE ' + @queryWhere END EXEC (@query) Thanks.

    Read the article

  • Adivce on Method overloads.

    - by Muhammad Kashif Nadeem
    Please see following methods. public static ProductsCollection GetDummyData(int? customerId, int? supplierId) { try { if (customerId != null && customerId > 0) { Filter.Add(Customres.CustomerId == customerId); } if (supplierId != null && supplierId > 0) { Filter.Add(Suppliers.SupplierId == supplierId); } ProductsCollection products = new ProductsCollection(); products.FetchData(Filter); return products; } catch { throw; } } public static ProductsCollection GetDummyData(int? customerId) { return ProductsCollection GetDummyData(customerId, (int?)null); } public static ProductsCollection GetDummyData() { return ProductsCollection GetDummyData((int?)null); } 1- Please advice how can I make overloads for both CustomerId and SupplierId because only one overload can be created with GetDummyData(int? ). Should I add another argument to mention that first argument is CustomerId or SupplierId for example GetDummyData(int?, string). OR should I use enum as 2nd argument and mention that first argument is CustoemId or SupplierId. 2- Is this condition is correct or just checking 0 is sufficient - if (customerId != null && customerId 0) 3- Using Try/catch like this is correct? 4- Passing (int?)null is correct or any other better approach. Edit: I have found some other posts like this and because I have no knowledge of Generics that is why I am facing this problem. Am I right? Following is the post. http://stackoverflow.com/questions/422625/overloaded-method-calling-overloaded-method

    Read the article

1 2 3  | Next Page >