Search Results

Search found 129 results on 6 pages for 'mustafa ismail mustafa'.

Page 1/6 | 1 2 3 4 5 6  | Next Page >

• how to run conky from terminal?

  - by Esmail0022

  http://www.unixmen.com/configure-con...t-howto-conky/ in this link there are 11 steps to get conky , i did all of them but the terminal show this message: The program 'conky' can be found in the following packages: * conky-cli * conky-std Try: sudo apt-get install and i try type this but saw this message: ismail@ismail-ASUS:~$ sudo apt-get install conky [sudo] password for ismail: E: Could not get lock /var/lib/dpkg/lock - open (11: Resource temporarily unavailable) E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it? Can you help me?

  Read the article

• reverse proxy on PFsense, squid or otherwise

  - by Mustafa Ismail Mustafa

  I've been trying to get this to work for days now and its not working. After bashing my head against the desk enough times, I've decided to man up and ask. I'm desperately trying to set up a reverse proxy on the pfsense box itself. One because its a pretty powerful box and its not being utilized to the maximum at all and two because I don't have any spare machines to setup squid (or any other reverse proxy [capable]) server on. So, on pfsense, everytime I set up rules (on ServicesProxy ServerGeneral) as so: acl surveillance dstdomain surveillance.myweb.local; acl camera dstdomain camera.myweb.local; http_access allow surveillance AND camera (ad nauseum) when I check the services, squid stops and refuses to restart until I remove them pesky acls that are supposed to make my life easier! What am I doing wrong? How can I get it to work? Is there another way/package I can use? Thanks

  Read the article

• remote telnet and email

  - by Mustafa Ismail Mustafa

  This issue has been occupying my work for the last few days and I will be understating when I say its driven me up the blasted walls. Essentially, I can ping and tracert the domain jnrcs.org and the subdomains mail.jnrcs.org and mail.jordanredcrescent.org. All three mentioned point to ip address 212.38.147.97. About 4 days ago, when we registered the domain "jnrcs.org" suddenly all external connection to the mail server from outside was lost. Not just mail, but other http based port-forwarded or natted services (such as camera surveillance and pbx services). I tried good old telnet (I'm a linux user) and I get the following output: telnet> o mail.jnrcs.org 25 Trying 212.38.147.97... telnet: Unable to connect to remote host: No route to host telnet> Tracert gives me: traceroute to mail.jnrcs.org (212.38.147.97), 30 hops max, 60 byte packets 1 192.168.1.2 (192.168.1.2) 0.869 ms 0.944 ms * 2 * * * 3 * * * 4 * * * 5 * * * 6 * 212.38.128.118 (212.38.128.118) 33.875 ms 39.187 ms 7 * * * 8 * * * 9 * * * 10 * * * 11 * * 212.38.147.97 (212.38.147.97) 67.621 ms I am stumped. Other friends from all around the world can telnet no problem. What could have possibly happened to make telnet/smtp/pop/imap/http access stop? Please bear in mind I'm primarily a developer but I [am under the delusion] that I can carry my weight in IT administration :) TIA

  Read the article

• Linux clients and Windows Servers can connect but not windows clients

  - by Mustafa Ismail Mustafa

  This is driving me insane because I can't make head or tails of it. We have two DCs (W2K3 SP1) and I'v tried this once on each machine as a sanity check. DHCP is being served by either one of the machines and all machines get an address no problem. The servers can connect/ping/browse to the www and so can all our linux clients. But NONE of our windows clients (all windows 7). I can do anything within the network, I can even ping the firewall/router but nothing from the windows clients is leaving the confines of our subnet. I don't get it. The linux and windows clients are both served from the same DHCP server, the gateway is the same, everything is the same. Anyone care to take a shot at how to resolve this? I tried adding explicit routes at the clients, but still no go. TIA SMIM

  Read the article

• adding or routing additional domain email addresses

  - by Mustafa Ismail Mustafa

  We have exchange 2007 and we bought a new domain name and we're still keeping the old one so that we can wean everyone off of the old emails. Now, I'm wondering how to go about this. I need to add the new domain as accepted and authoritative by the exchange server. Emails on the new domain need to get routed to the inbox and ditto the old emails, however, I want to be able to change the reply-to in the header to the new email address automatically. I also want to set the new email addresses as the defaults. Ideally, I'd like to be able to add a message at the bottom of every externally outgoing email saying that the new email is [email protected]. But this is a nice to have, certainly not a must have. I've added the new domain as authoritative, and managed to change the primary smtp email addresses to the new one, but sent emails are not being routed to them and neither are the old email addresses! Now how the heck would I go about fixing all of that? I'm completely stumped! TIA

  Read the article

• Assigning security groups different ranges

  - by Mustafa Ismail Mustafa

  Is it possible to assign a security group in windows 2008 a specific DHCP scope? Meaning, let's say we have 2 groups, employees and managers in the superscope Company. Assuming that each user is distinctly in either group and there are no overlaps, would it be possible to assign members of the security group employees a dhcp address in the range 192.168.1.0/24 and managers 192.168.2.0/24 ? The DHCP server is the same server. This is on Windows SBS 2008 if it makes any difference If it is possible, how do you go about setting it up. TIA

  Read the article

• Syncronizing multiple exchange servers 2007

  - by Mustafa Ismail Mustafa

  We're introducing a new exchange server for several reasons. After the introduction of the new server, and synchronizing it with the old one (mailboxes, contacts, rules, the whole shebang) we're going to be formatting the old machine, install XenServer 5.5 on it, and create a slices, one of which will have Exchange server, which again will need to be synchronized. Then, we'll have 2 different routes to the mail servers (mx1, mx2) so that if there is an outage on one, the other should be available. So now, I'm wondering how to synch? I can move a mailbox from one server to the other, and I'm sure that can be done in bulk, but that's not what I'm looking for. I'm looking to make both Servers equal, the first time so I can make a backup of the original, and the second time so that they can be made into peers. This is with Exchange 2007 on Windows 2008 R2 (x64) Suggestions? TIA

  Read the article

• Moving MS Exchange 2007 to another machine

  - by Mustafa Ismail Mustafa

  We have a machine that has been chugging along with the burden of both Exchange and DC and DNS all with SBS 2008. We have a better machine now and I'd like to move Exchange 2007 to that machine and take it off of this machine. In fact, I'm planning on formatting the old machine and get rid of SBS all together because it is making the machine SLOW. How would I go about making the move? I've read on previous versions of Exchange (2000), that all you do is install Exchange on the new machine and then start moving mailboxes one after the other. Well, what about all the different rules we have in place? How do those get moved? How do we de-commission the old exchange and set up the new exchange as the primary one? Come to think of it, how do we have both exchanges recognize each other on the same domain? TIA

  Read the article

• "pull" process/job into the background

  - by Mustafa Ismail Mustafa

  I know of terminating a command with & and then moving it into the background by pressing Ctrl-Z and then bg [pid], and I also know of nohup. But say you started a process that turned out to take much longer than one expected, is there a way of pulling, so to speak, this process from another terminal screen into the background so that even if I log off from the server the process would continue?

  Read the article

• How to correct my null exception??

  - by kostas

  hi!i have created a contact form using c# and web services.i would like to get an alert message if the user hasnt filled his name or when his name is a number.this is my c# code: public partial class Default2 : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { } protected void Button1_Click(object sender, EventArgs e) { Validation.WebService validate = new Validation.WebService(); bool ismail = validate.isEmail(TextBox2.Text); if (!ismail) { Label1.Text = "your mail is wrong!!"; } Validation.nameVal valid = new Validation.nameVal(); bool isname = valid.isName(TextBox1.Text); if (!isname ) { Label2.Text = "Your name is wrong!!"; } else if (isname==null) { Label2.Text = "Please fill in your name"; } if (isname && ismail) { { Label1.Text = null; Label2.Text = null; Label3.Text = "Your message has been send!";} } } } with this code i have a null exception..

  Read the article

• Whats consuming HDD Space

  - by Umair Mustafa

  I have single partition of 92GB in which I installed Ubuntu 12.04. And for some Unknown reason a message pop ups saying that I only have 1GB of HDD space left. I ran command sudo du -hscx * on / and /home /home gave me this result 4.0K C:\nppdf32Log\debuglog.txt 0 convertedvideo.avi 176M Desktop 16K Documents 169M Downloads 4.0K examples.desktop 17M file.txt 4.0K Music 984K Pictures 4.0K Public 320K Red Hat 6.iso 2.5M syslog-ng_3.3.6.tar.gz 4.0K Templates 8.0K terminal.png 1.2M Thunderbird Attachments 698M ubuntu10.04LTS.iso 16K Ubuntu One 4.0K Untitled Folder 4.0K Videos 21G VirtualBox VMs 22G total And / gave me this result 81G home 0 initrd.img 0 initrd.img.old 833M lib 16K lost+found 68K media 4.0K mnt 260M opt du: cannot access `proc/8339/task/8339/fd/4': No such file or directory du: cannot access `proc/8339/task/8339/fdinfo/4': No such file or directory du: cannot access `proc/8339/fd/4': No such file or directory du: cannot access `proc/8339/fdinfo/4': No such file or directory 0 proc 640K root 908K run 8.6M sbin 4.0K selinux 4.0K srv 0 sys 148K tmp 3.3G usr 436M var 0 vmlinuz 0 vmlinuz.old 86G total If you look at the result returned by / it shows that /home is consuming 81GB but on the other hand /home returns only 22GB. I cant figure out whats consuming the HDD. I have not installed anything except Virtual Machines Perpetrator found using Disk Usage Analyzer

  Read the article

• Objective C style nil in java?

  - by Usman Ismail

  Objective C has a concept of a nil object which would accept any method call with any parameters without complaining and silently return another nil. I have used something similar in Java using easymock and mockito for testing. Is there something similar for main line code? Is it even a good idea to have something like this? One use-case where I am considering using it is with optional metrics. We have codahale metrics counters on which we call mark() every time an event is generated. This is surrounded by an If/then to check for metrics enabled flag. I could just use a nil object as counter and silently accept the mark call if metrics are not enabled.

  Read the article

• j2ee implementing security and using a framwork pros and cons

  - by Ismail Marmoush

  I'm a newbie to j2ee security, and i'm not j2ee expert either, though i'm really willing to put some effort and learn I've an application that i'm about to develop on Google App Engine (GAE) --with no time constraints. As you know GAE handles a lot of web container security issues for you, also I will be using openID for authentication exclusively (sessions will be handled by provider). GAE supports SSL which will help with confidentiality and integrity maybe. Authorization can be done through filters. I know reinventing the wheel is a mess, but I was looking forward to learn something about security and implement that in my new app. so what the pros and cons of using a framework like shiro, spring security, jguard etc or filling the rest of gaps on my own ?

  Read the article

• Ubuntu Lagging even LXDE freezes

  - by Anas Ismail Khan

  Laptop, i3, Ram: 2GB. Using 14.04LTS... and it lags like hell. Even if i open more than 4 tabs in Chrome, it freezes, and often I have no choice but to restart and multi-tasking is kinda difficult and at times impossible. Now there's whole thing about Lubuntu and LXDE that are suposed to be super-fast.. installed LXDE.. mind, not lubuntu-desktop. just LXDE. And it too freezes every now and then, and trust this.. when it freezes, it does so worse than Unity.. ESPECIALLY when i start PCManFM... and mount a disk or two... Any ideas as to why this is happening.. The minimum requirements for Unity are supposed to be 1Gig RAM.. and people are running it fine even on 512 MB...

  Read the article

• Need help understanding a recursion example in Python

  - by Ali Mustafa

  Python is my first programming language, and I'm learning it from "How to Think Like a Computer Scientist". In Chapter 5 the author gives the following example on recursion: def factorial(n): if n == 0: return 1 else: recurse = factorial(n-1) result = n * recurse return result I understand that if n = 3, then the function will execute the second branch. But what I don't understand is what happens when the function enters the second branch. Can someone explain it to me?

  Read the article

• Live Mail folder and Thunderbird

  - by Umair Mustafa

  Me Friends Hello, Guys I'm facing a small issue and that is, I created a New account(MS live Email account) on Thunderbird and set the incoming protocol to IMAP and "pop3.live.com" Port No 995 , SSL to SSL/TLS and Outgoing protocol to SMTP and "smtp.live.com" Port No 25 , SSL to STARTTLS Now What I want is that there are sub folders in my Web based Live Email account which are not appearing when I create the account in Thunderbird. Please tell me how to get this thing done

  Read the article

• Ubuntu 12.04 installer Crashed

  - by Umair Mustafa

  I downloaded Multiple times Ubuntu 12.04 and Ubuntu 12.04.1. And tried to install them using first Virtual box if it work I move to install on actual drive. I dont knw but 12.04.1 dont wanna install on my system So i downloaded 12.04 release and installed it on Virtual box and it installed perfectly then i moved on to install it as Dual OS along with windows 7 but the installer crashed just like the other version and I dont know what the heck is the problem with ubuntu OS Installers. Ubuntu really need to work on their Installer. I love Ubuntu but such things are really headache. At first I thought image was not properly so i burned on another dvd but alas no use same stupid error. Now there are 3 images of 12.04 and 2 images of 12.04.1 and none of them is working on my system. And wasted two dvds. Does anyone know how to solve this problemo.

  Read the article

• WP E Commerce Safe Mode restriction error [on hold]

  - by Mustafa Kamal

  I have my online shop, created with WP Ecommerce getting broken after I moved it to another server. I could be sure that the problem comes from WP Ecommerce because when I disable that plugin. Everything run as expected. This is the exact error message Warning: session_start() [function.session-start]: SAFE MODE Restriction in effect. The script whose uid is 515 is not allowed to access /tmp owned by uid 0 in /home/mikalu/public_html/wp-content/plugins/wp-e-commerce/wpsc-core/wpsc-constants.php on line 17 Fatal error: session_start() [<a href='function.session-start'>function.session-start</a>]: Failed to initialize storage module: files (path: ) in /home/mikalu/public_html/wp-content/plugins/wp-e-commerce/wpsc-core/wpsc-constants.php on line 17 I've tried to turn off safe mode on my php configuration. nothing happens. the error's still there. I thought it was some kind of permission issue, so I tried to change /tmp permission to 777. Nothing happens. I googled it some more and suspect it might have something to do with fastCGI configuration and stuff. Which I totally don't understand. My googling result mostly suggest me to consult the web hosting provider or even to move to another host. But in this case, I am the owner of the server (VPS with cPanel/WHM). And I don't have any idea how to solve this kind of problem.

  Read the article

• ERROR in Installing a Theme in ubuntu 13.10

  - by Badar 'Prince' Ismail

  I just upgraded to Ubuntu 13.10 3 days ago and since then I've been trying to install a couple of themes for example i tried MOKA theme and many more.whenever i try to install a theme when ever i add the PPA: and after that i type sudo apt-get update its shows this: W: Failed to fetch http://ppa.launchpad.net/jolicloud-team/ppa/ubuntu/dists/saucy/main/binary-i386/Packages 404 Not Found W: Failed to fetch http://ppa.launchpad.net/webupd8team/jupiter/ubuntu/dists/saucy/main/binary-i386/Packages 404 Not Found E: Some index files failed to download. They have been ignored, or old ones used instead.

  Read the article

• modifying openssl library code

  - by Nouar Ismail

  I am ordered to check the availability to customize an encryption algorithm the IPsec protocol use in Ubuntu, if anyone have any suggestion about this point?. I've read that the encryption operation occur in libcrypto in openssl. when I tried to compile and install OpenSSL from source ..I had everything ok with the installation, but when to check the version installed on the system, with "dpkg -s openssl", it didn't seem that it's the version i had already installed, maybe it had been installed successfully, but the question is: would it be the version the system use for encryption operations? would it overwrite the old version? and would my changes in code have effects ? any help please? thank you in advance.

  Read the article

• SSD Tweaks for Ubuntu 12.04

  - by Mustafa Erdinç

  I need to tweak my Dell XPS 13z SSD for maximum performance and life cycle than I read the solutions explained here, but it is for 11.10 and my fstab is different. For now my fstab is looks like this: proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=abf5ce9e-bdb7-4b2f-a7bd-bbd9efa72a98 / ext4 errors=remount-ro 0 1 # /home was on /dev/sda2 during installation UUID=491427b2-7482-4483-b6eb-7c564b991aff /home ext4 defaults 0 2 # swap was on /dev/sda3 during installation #UUID=7551000d-e708-4e0f-9fd2-9f93119f63fb none swap sw 0 0 /dev/mapper/cryptswap1 none swap sw 0 0 tmpfs /tmp tmpfs mode=1777 And my rc.local is looks like this: echo noop > /sys/block/sda/queue/scheduler echo deadline > /sys/block/sda/queue/scheduler echo 1 > /sys/block/sda/queue/iosched/fifo_batch exit 0 Do you have any suggestions, what should I do? Regards

  Read the article

• ssh: connect to host xxx.xxx.xxx.xxx port 22: Connection refused

  - by Umair Mustafa

  Well im trying to connect to a client machine using ssh using this command ssh root@ip-of-server It immediately slaps me with this error ssh: connect to host xxx.xxx.xxx.xxx port 22: Connection refused Then I tried to access a local server using same command it worked. For further experiment I tried to do ssh [email protected] It displayed the same error Whats wrong here. Any suggestion

  Read the article

• Best Settings for Ubuntu Installation

  - by Umair Mustafa

  I need to install ubuntu 12.04 as i messed up my OS. So can someone please suggest what are the best settings for Partitions. I mean should I install the Ubuntu on simple one partition. Because in this case I guess I have to install all the packages/applications everytime I install the fresh OS which is a headache. Is there a way that I can retain all the applications on New installed OS ???? My HDD size is 120 GB

  Read the article

• What is a good use case for scala?

  - by Usman Ismail

  In a current project we have setup the build so that we could mix Java and Scala. I would like to use more Scala in our code base to make the code more readable and concise. In the process also learn the language by handing over real features. So I plan to use Scala for some classes to showcase its benefits and convince other devs to look into using Scala too. For a rest based web server or a program in general what kind of code structures lend themselves to Scala's functional programming style.

  Read the article

• Restful Java based web services in json + html5 and javascript no templates (jsp/jsf/freemarker) aka fat/thick client

  - by Ismail Marmoush

  I have this idea of building a website which service JSON data through restful services framework. And will not use any template engines like jsp/jsf/freemarker. Just pure html5 and Javascript libs. What do you think of the pros and cons of such design ? Just for elaboration and brain storming a friend of mine argued with the following concerns: sounds like gwt this way you won't have any control over you service api for example say you wanna charge the user per request how will you handle it? how will you control your design and themes? what about the 1st request the browser make? not easy with this all of the user's requests will come with "Accept" header "application/json" how will you separate browser from abuser? this way all of your public apis will be used by third party apps abusively and you won't be able to lock it since you won't be able to block the normal user browser We won't use compiled html anyway but may be something like freemarker and in that case you won't expose any of your json resources to the unauthorized user but you will expose all the html since any browser can access them all the well known 1st class services do this can you send me links to what you've read? keep in mind the DOM based XSS it will be a nightmare ofc, if what you say is applicable.

  Read the article

1 2 3 4 5 6  | Next Page >