Search Results

Search found 20015 results on 801 pages for 'network scan'.

Page 1/801 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Simple scan not working after upgrading to 12.10 (Xubuntu)

    - by mydoghasworms
    Since upgrading to 12.10 (Xubuntu), Simple Scan is not working anymore. I got scanning working with Xsane, but only if Simple Scan has not run before. Otherwise I have to restart the printer/scanner (HP OfficeJet J5783). In kernel.log I see: kernel: [ 1214.120964] usb 2-1.4: >usbfs: process 4412 (simple-scan) did not claim interface 2 before use and in syslog simple-scan: io/hpmud/dot4.c 172: unable to read Dot4ReverseCmd header: No data available simple-scan: io/hpmud/musb.c 1933: invalid Dot4Credit from peripheral simple-scan: io/hpmud/dot4.c 172: unable to read Dot4ReverseCmd header: No data available simple-scan: io/hpmud/musb.c 1933: invalid Dot4Credit from peripheral simple-scan: sane_hpaio_cancel: already cancelled! simple-scan: io/hpmud/dot4.c 172: unable to read Dot4ReverseCmd header: No data available simple-scan: io/hpmud/musb.c 1933: invalid Dot4Credit from peripheral simple-scan: io/hpmud/dot4.c 231: unable to read Dot4ReverseReply header: No data available bytesRead=0 simple-scan: io/hpmud/dot4.c 319: invalid DOT4InitReply retrying command... simple-scan: io/hpmud/dot4.c 172: unable to read Dot4ReverseCmd header: No data available simple-scan: io/hpmud/musb.c 1933: invalid Dot4Credit from peripheral simple-scan: io/hpmud/hpmud.c 342: device_cleanup: device uri=hp:/usb/Officejet_J5700_series?serial=CN81LCV0V604TC simple-scan: io/hpmud/hpmud.c 354: device_cleanup: close device dd=1... simple-scan: io/hpmud/hpmud.c 356: device_cleanup: done closing device dd=1 Any ideas?

    Read the article

  • Network connection delay after installing indicator-network

    - by Adrian
    Ok, so here's the thing,I installed wingpanel in UBUNTU 10.10, i removed the gnome-panels (yes, both). In the wingpanel itself there's no NETWORK indicator, so i google it and in some forums, some guy wrote that you have to install "indicator-network". I did it, and it solved the network indicator in the wingpanel, BUT now everytime i turn on my computer, the connection takes like 2 minutes or more to connect, when before installing this thing it did it immediately. How can i solve this? any help?

    Read the article

  • nm-applet gone?

    - by welp
    nm-applet seems to have disappeared from my system. I am running 12.10. Here's what I get when I check my package manager logs: ? ~ grep network-manager /var/log/dpkg.log 2012-10-06 10:37:08 upgrade network-manager-gnome:amd64 0.9.6.2-0ubuntu5 0.9.6.2-0ubuntu6 2012-10-06 10:37:08 status half-configured network-manager-gnome:amd64 0.9.6.2-0ubuntu5 2012-10-06 10:37:08 status unpacked network-manager-gnome:amd64 0.9.6.2-0ubuntu5 2012-10-06 10:37:08 status half-installed network-manager-gnome:amd64 0.9.6.2-0ubuntu5 2012-10-06 10:37:08 status half-installed network-manager-gnome:amd64 0.9.6.2-0ubuntu5 2012-10-06 10:37:08 status half-installed network-manager-gnome:amd64 0.9.6.2-0ubuntu5 2012-10-06 10:37:08 status half-installed network-manager-gnome:amd64 0.9.6.2-0ubuntu5 2012-10-06 10:37:08 status half-installed network-manager-gnome:amd64 0.9.6.2-0ubuntu5 2012-10-06 10:37:08 status half-installed network-manager-gnome:amd64 0.9.6.2-0ubuntu5 2012-10-06 10:37:08 status half-installed network-manager-gnome:amd64 0.9.6.2-0ubuntu5 2012-10-06 10:37:09 status half-installed network-manager-gnome:amd64 0.9.6.2-0ubuntu5 2012-10-06 10:37:09 status unpacked network-manager-gnome:amd64 0.9.6.2-0ubuntu6 2012-10-06 10:37:09 status unpacked network-manager-gnome:amd64 0.9.6.2-0ubuntu6 2012-10-06 10:39:50 configure network-manager-gnome:amd64 0.9.6.2-0ubuntu6 2012-10-06 10:39:50 status unpacked network-manager-gnome:amd64 0.9.6.2-0ubuntu6 2012-10-06 10:39:50 status unpacked network-manager-gnome:amd64 0.9.6.2-0ubuntu6 2012-10-06 10:39:50 status half-configured network-manager-gnome:amd64 0.9.6.2-0ubuntu6 2012-10-06 10:39:50 status installed network-manager-gnome:amd64 0.9.6.2-0ubuntu6 2012-10-28 22:27:23 status installed network-manager-gnome:amd64 0.9.6.2-0ubuntu6 2012-10-28 22:27:23 remove network-manager-gnome:amd64 0.9.6.2-0ubuntu6 2012-10-28 22:27:23 status half-configured network-manager-gnome:amd64 0.9.6.2-0ubuntu6 2012-10-28 22:27:23 status half-installed network-manager-gnome:amd64 0.9.6.2-0ubuntu6 2012-10-28 22:27:23 status half-installed network-manager-gnome:amd64 0.9.6.2-0ubuntu6 2012-10-28 22:27:23 status half-installed network-manager-gnome:amd64 0.9.6.2-0ubuntu6 2012-10-28 22:27:23 status half-installed network-manager-gnome:amd64 0.9.6.2-0ubuntu6 2012-10-28 22:27:23 status half-installed network-manager-gnome:amd64 0.9.6.2-0ubuntu6 2012-10-28 22:27:23 status half-installed network-manager-gnome:amd64 0.9.6.2-0ubuntu6 2012-10-28 22:27:23 status half-installed network-manager-gnome:amd64 0.9.6.2-0ubuntu6 2012-10-28 22:27:23 status half-installed network-manager-gnome:amd64 0.9.6.2-0ubuntu6 2012-10-28 22:27:23 status config-files network-manager-gnome:amd64 0.9.6.2-0ubuntu6 2012-10-28 22:27:23 status config-files network-manager-gnome:amd64 0.9.6.2-0ubuntu6 2012-10-31 19:58:03 install network-manager-gnome:amd64 0.9.6.2-0ubuntu6 0.9.6.2-0ubuntu6 2012-10-31 19:58:03 status half-installed network-manager-gnome:amd64 0.9.6.2-0ubuntu6 2012-10-31 19:58:03 status half-installed network-manager-gnome:amd64 0.9.6.2-0ubuntu6 2012-10-31 19:58:03 status half-installed network-manager-gnome:amd64 0.9.6.2-0ubuntu6 2012-10-31 19:58:03 status half-installed network-manager-gnome:amd64 0.9.6.2-0ubuntu6 2012-10-31 19:58:03 status half-installed network-manager-gnome:amd64 0.9.6.2-0ubuntu6 2012-10-31 19:58:03 status half-installed network-manager-gnome:amd64 0.9.6.2-0ubuntu6 2012-10-31 19:58:03 status half-installed network-manager-gnome:amd64 0.9.6.2-0ubuntu6 2012-10-31 19:58:03 status half-installed network-manager-gnome:amd64 0.9.6.2-0ubuntu6 2012-10-31 19:58:03 status unpacked network-manager-gnome:amd64 0.9.6.2-0ubuntu6 2012-10-31 19:58:03 status unpacked network-manager-gnome:amd64 0.9.6.2-0ubuntu6 2012-10-31 19:58:06 configure network-manager-gnome:amd64 0.9.6.2-0ubuntu6 2012-10-31 19:58:06 status unpacked network-manager-gnome:amd64 0.9.6.2-0ubuntu6 2012-10-31 19:58:07 status unpacked network-manager-gnome:amd64 0.9.6.2-0ubuntu6 2012-10-31 19:58:07 status half-configured network-manager-gnome:amd64 0.9.6.2-0ubuntu6 2012-10-31 19:58:07 status installed network-manager-gnome:amd64 0.9.6.2-0ubuntu6 ? ~ Unfortunately, I cannot find network-manager-applet package at all: ? ~ apt-cache search network-manager-applet ? ~ Here are the contents of /etc/apt/sources.list: ? ~ cat /etc/apt/sources.list # deb cdrom:[Ubuntu 12.04 LTS _Precise Pangolin_ - Release amd64 (20120425)]/ dists/precise/main/binary-i386/ # deb cdrom:[Ubuntu 12.04 LTS _Precise Pangolin_ - Release amd64 (20120425)]/ dists/precise/restricted/binary-i386/ # deb cdrom:[Ubuntu 12.04 LTS _Precise Pangolin_ - Release amd64 (20120425)]/ precise main restricted # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb http://gb.archive.ubuntu.com/ubuntu/ quantal main restricted deb-src http://gb.archive.ubuntu.com/ubuntu/ quantal main restricted ## Major bug fix updates produced after the final release of the ## distribution. deb http://gb.archive.ubuntu.com/ubuntu/ quantal-updates main restricted deb-src http://gb.archive.ubuntu.com/ubuntu/ quantal-updates main restricted ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb http://gb.archive.ubuntu.com/ubuntu/ quantal universe deb-src http://gb.archive.ubuntu.com/ubuntu/ quantal universe deb http://gb.archive.ubuntu.com/ubuntu/ quantal-updates universe deb-src http://gb.archive.ubuntu.com/ubuntu/ quantal-updates universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb http://gb.archive.ubuntu.com/ubuntu/ quantal multiverse deb-src http://gb.archive.ubuntu.com/ubuntu/ quantal multiverse deb http://gb.archive.ubuntu.com/ubuntu/ quantal-updates multiverse deb-src http://gb.archive.ubuntu.com/ubuntu/ quantal-updates multiverse ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. deb http://gb.archive.ubuntu.com/ubuntu/ quantal-backports main restricted universe multiverse deb-src http://gb.archive.ubuntu.com/ubuntu/ quantal-backports main restricted universe multiverse deb http://security.ubuntu.com/ubuntu quantal-security main restricted deb-src http://security.ubuntu.com/ubuntu quantal-security main restricted deb http://security.ubuntu.com/ubuntu quantal-security universe deb-src http://security.ubuntu.com/ubuntu quantal-security universe deb http://security.ubuntu.com/ubuntu quantal-security multiverse deb-src http://security.ubuntu.com/ubuntu quantal-security multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. # deb http://archive.canonical.com/ubuntu precise partner # deb-src http://archive.canonical.com/ubuntu precise partner ## This software is not part of Ubuntu, but is offered by third-party ## developers who want to ship their latest software. deb http://extras.ubuntu.com/ubuntu quantal main deb-src http://extras.ubuntu.com/ubuntu quantal main ? ~ Right now, I can't think of anything else. Happy to provide more info upon request.

    Read the article

  • So…is it a Seek or a Scan?

    - by Paul White
    You’re probably most familiar with the terms ‘Seek’ and ‘Scan’ from the graphical plans produced by SQL Server Management Studio (SSMS).  The image to the left shows the most common ones, with the three types of scan at the top, followed by four types of seek.  You might look to the SSMS tool-tip descriptions to explain the differences between them: Not hugely helpful are they?  Both mention scans and ranges (nothing about seeks) and the Index Seek description implies that it will not scan the index entirely (which isn’t necessarily true). Recall also yesterday’s post where we saw two Clustered Index Seek operations doing very different things.  The first Seek performed 63 single-row seeking operations; and the second performed a ‘Range Scan’ (more on those later in this post).  I hope you agree that those were two very different operations, and perhaps you are wondering why there aren’t different graphical plan icons for Range Scans and Seeks?  I have often wondered about that, and the first person to mention it after yesterday’s post was Erin Stellato (twitter | blog): Before we go on to make sense of all this, let’s look at another example of how SQL Server confusingly mixes the terms ‘Scan’ and ‘Seek’ in different contexts.  The diagram below shows a very simple heap table with two columns, one of which is the non-clustered Primary Key, and the other has a non-unique non-clustered index defined on it.  The right hand side of the diagram shows a simple query, it’s associated query plan, and a couple of extracts from the SSMS tool-tip and Properties windows. Notice the ‘scan direction’ entry in the Properties window snippet.  Is this a seek or a scan?  The different references to Scans and Seeks are even more pronounced in the XML plan output that the graphical plan is based on.  This fragment is what lies behind the single Index Seek icon shown above: You’ll find the same confusing references to Seeks and Scans throughout the product and its documentation. Making Sense of Seeks Let’s forget all about scans for a moment, and think purely about seeks.  Loosely speaking, a seek is the process of navigating an index B-tree to find a particular index record, most often at the leaf level.  A seek starts at the root and navigates down through the levels of the index to find the point of interest: Singleton Lookups The simplest sort of seek predicate performs this traversal to find (at most) a single record.  This is the case when we search for a single value using a unique index and an equality predicate.  It should be readily apparent that this type of search will either find one record, or none at all.  This operation is known as a singleton lookup.  Given the example table from before, the following query is an example of a singleton lookup seek: Sadly, there’s nothing in the graphical plan or XML output to show that this is a singleton lookup – you have to infer it from the fact that this is a single-value equality seek on a unique index.  The other common examples of a singleton lookup are bookmark lookups – both the RID and Key Lookup forms are singleton lookups (an RID lookup finds a single record in a heap from the unique row locator, and a Key Lookup does much the same thing on a clustered table).  If you happen to run your query with STATISTICS IO ON, you will notice that ‘Scan Count’ is always zero for a singleton lookup. Range Scans The other type of seek predicate is a ‘seek plus range scan’, which I will refer to simply as a range scan.  The seek operation makes an initial descent into the index structure to find the first leaf row that qualifies, and then performs a range scan (either backwards or forwards in the index) until it reaches the end of the scan range. The ability of a range scan to proceed in either direction comes about because index pages at the same level are connected by a doubly-linked list – each page has a pointer to the previous page (in logical key order) as well as a pointer to the following page.  The doubly-linked list is represented by the green and red dotted arrows in the index diagram presented earlier.  One subtle (but important) point is that the notion of a ‘forward’ or ‘backward’ scan applies to the logical key order defined when the index was built.  In the present case, the non-clustered primary key index was created as follows: CREATE TABLE dbo.Example ( key_col INTEGER NOT NULL, data INTEGER NOT NULL, CONSTRAINT [PK dbo.Example key_col] PRIMARY KEY NONCLUSTERED (key_col ASC) ) ; Notice that the primary key index specifies an ascending sort order for the single key column.  This means that a forward scan of the index will retrieve keys in ascending order, while a backward scan would retrieve keys in descending key order.  If the index had been created instead on key_col DESC, a forward scan would retrieve keys in descending order, and a backward scan would return keys in ascending order. A range scan seek predicate may have a Start condition, an End condition, or both.  Where one is missing, the scan starts (or ends) at one extreme end of the index, depending on the scan direction.  Some examples might help clarify that: the following diagram shows four queries, each of which performs a single seek against a column holding every integer from 1 to 100 inclusive.  The results from each query are shown in the blue columns, and relevant attributes from the Properties window appear on the right: Query 1 specifies that all key_col values less than 5 should be returned in ascending order.  The query plan achieves this by seeking to the start of the index leaf (there is no explicit starting value) and scanning forward until the End condition (key_col < 5) is no longer satisfied (SQL Server knows it can stop looking as soon as it finds a key_col value that isn’t less than 5 because all later index entries are guaranteed to sort higher). Query 2 asks for key_col values greater than 95, in descending order.  SQL Server returns these results by seeking to the end of the index, and scanning backwards (in descending key order) until it comes across a row that isn’t greater than 95.  Sharp-eyed readers may notice that the end-of-scan condition is shown as a Start range value.  This is a bug in the XML show plan which bubbles up to the Properties window – when a backward scan is performed, the roles of the Start and End values are reversed, but the plan does not reflect that.  Oh well. Query 3 looks for key_col values that are greater than or equal to 10, and less than 15, in ascending order.  This time, SQL Server seeks to the first index record that matches the Start condition (key_col >= 10) and then scans forward through the leaf pages until the End condition (key_col < 15) is no longer met. Query 4 performs much the same sort of operation as Query 3, but requests the output in descending order.  Again, we have to mentally reverse the Start and End conditions because of the bug, but otherwise the process is the same as always: SQL Server finds the highest-sorting record that meets the condition ‘key_col < 25’ and scans backward until ‘key_col >= 20’ is no longer true. One final point to note: seek operations always have the Ordered: True attribute.  This means that the operator always produces rows in a sorted order, either ascending or descending depending on how the index was defined, and whether the scan part of the operation is forward or backward.  You cannot rely on this sort order in your queries of course (you must always specify an ORDER BY clause if order is important) but SQL Server can make use of the sort order internally.  In the four queries above, the query optimizer was able to avoid an explicit Sort operator to honour the ORDER BY clause, for example. Multiple Seek Predicates As we saw yesterday, a single index seek plan operator can contain one or more seek predicates.  These seek predicates can either be all singleton seeks or all range scans – SQL Server does not mix them.  For example, you might expect the following query to contain two seek predicates, a singleton seek to find the single record in the unique index where key_col = 10, and a range scan to find the key_col values between 15 and 20: SELECT key_col FROM dbo.Example WHERE key_col = 10 OR key_col BETWEEN 15 AND 20 ORDER BY key_col ASC ; In fact, SQL Server transforms the singleton seek (key_col = 10) to the equivalent range scan, Start:[key_col >= 10], End:[key_col <= 10].  This allows both range scans to be evaluated by a single seek operator.  To be clear, this query results in two range scans: one from 10 to 10, and one from 15 to 20. Final Thoughts That’s it for today – tomorrow we’ll look at monitoring singleton lookups and range scans, and I’ll show you a seek on a heap table. Yes, a seek.  On a heap.  Not an index! If you would like to run the queries in this post for yourself, there’s a script below.  Thanks for reading! IF OBJECT_ID(N'dbo.Example', N'U') IS NOT NULL BEGIN DROP TABLE dbo.Example; END ; -- Test table is a heap -- Non-clustered primary key on 'key_col' CREATE TABLE dbo.Example ( key_col INTEGER NOT NULL, data INTEGER NOT NULL, CONSTRAINT [PK dbo.Example key_col] PRIMARY KEY NONCLUSTERED (key_col) ) ; -- Non-unique non-clustered index on the 'data' column CREATE NONCLUSTERED INDEX [IX dbo.Example data] ON dbo.Example (data) ; -- Add 100 rows INSERT dbo.Example WITH (TABLOCKX) ( key_col, data ) SELECT key_col = V.number, data = V.number FROM master.dbo.spt_values AS V WHERE V.[type] = N'P' AND V.number BETWEEN 1 AND 100 ; -- ================ -- Singleton lookup -- ================ ; -- Single value equality seek in a unique index -- Scan count = 0 when STATISTIS IO is ON -- Check the XML SHOWPLAN SELECT E.key_col FROM dbo.Example AS E WHERE E.key_col = 32 ; -- =========== -- Range Scans -- =========== ; -- Query 1 SELECT E.key_col FROM dbo.Example AS E WHERE E.key_col <= 5 ORDER BY E.key_col ASC ; -- Query 2 SELECT E.key_col FROM dbo.Example AS E WHERE E.key_col > 95 ORDER BY E.key_col DESC ; -- Query 3 SELECT E.key_col FROM dbo.Example AS E WHERE E.key_col >= 10 AND E.key_col < 15 ORDER BY E.key_col ASC ; -- Query 4 SELECT E.key_col FROM dbo.Example AS E WHERE E.key_col >= 20 AND E.key_col < 25 ORDER BY E.key_col DESC ; -- Final query (singleton + range = 2 range scans) SELECT E.key_col FROM dbo.Example AS E WHERE E.key_col = 10 OR E.key_col BETWEEN 15 AND 20 ORDER BY E.key_col ASC ; -- === TIDY UP === DROP TABLE dbo.Example; © 2011 Paul White email: [email protected] twitter: @SQL_Kiwi

    Read the article

  • Neural Network settings for fast training

    - by danpalmer
    I am creating a tool for predicting the time and cost of software projects based on past data. The tool uses a neural network to do this and so far, the results are promising, but I think I can do a lot more optimisation just by changing the properties of the network. There don't seem to be any rules or even many best-practices when it comes to these settings so if anyone with experience could help me I would greatly appreciate it. The input data is made up of a series of integers that could go up as high as the user wants to go, but most will be under 100,000 I would have thought. Some will be as low as 1. They are details like number of people on a project and the cost of a project, as well as details about database entities and use cases. There are 10 inputs in total and 2 outputs (the time and cost). I am using Resilient Propagation to train the network. Currently it has: 10 input nodes, 1 hidden layer with 5 nodes and 2 output nodes. I am training to get under a 5% error rate. The algorithm must run on a webserver so I have put in a measure to stop training when it looks like it isn't going anywhere. This is set to 10,000 training iterations. Currently, when I try to train it with some data that is a bit varied, but well within the limits of what we expect users to put into it, it takes a long time to train, hitting the 10,000 iteration limit over and over again. This is the first time I have used a neural network and I don't really know what to expect. If you could give me some hints on what sort of settings I should be using for the network and for the iteration limit I would greatly appreciate it. Thank you!

    Read the article

  • "Hostile" network in the company - please comment on a security setup

    - by TomTom
    I have a little specific problem here that I want (need) to solve in a satisfactory way. My company has multiple (IPv4) networks that are controlled by our router sitting in the middle. Typical smaller shop setup. There is now one additional network that has an IP Range OUTSIDE of our control, connected to the internet with another router OUTSIDE of our control. Call it a project network that is part of another companies network and combined via VPN they set up. This means: They control the router that is used for this network and They can reconfigure things so that they can access the machines in this network. The network is physically split on our end through some VLAN capable switches as it covers three locations. At one end there is the router the other company controls. I Need / want to give the machines used in this network access to my company network. In fact, it may be good to make them part of my active directory domain. The people working on those machines are part of my company. BUT - I need to do so without compromising the security of my company network from outside influence. Any sort of router integration using the externally controlled router is out by this idea So, my idea is this: We accept the IPv4 address space and network topology in this network is not under our control. We seek alternatives to integrate those machines into our company network. The 2 concepts I came up with are: Use some sort of VPN - have the machines log into VPN. Thanks to them using modern windows, this could be transparent DirectAccess. This essentially treats the other IP space not different than any restaurant network a laptop of the company goes in. Alternatively - establish IPv6 routing to this ethernet segment. But - and this is a trick - block all IPv6 packets in the switch before they hit the third party controlled router, so that even IF they turn on IPv6 on that thing (not used now, but they could do it) they would get not a single packet. The switch can nicely do that by pulling all IPv6 traffic coming to that port into a separate VLAN (based on ethernet protocol type). Anyone sees a problem with using he switch to isolate the outer from IPv6? Any security hole? It is sad we have to treat this network as hostile - would be a lot easier - but the support personnel there is of "known dubious quality" and the legal side is clear - we can not fulfill our obligations when we integrate them into our company while they are under a jurisdiction we don't have a say in.

    Read the article

  • How to send raw data over a network?

    - by youllknow
    Hi everyone! I've same data stored in a byte-array. The data contains a IPv4 packet (which contains a udp-packet). I want to send these array raw over the network using C# (preferred) or C++. I don't want to use C#'s udp-client for example. Does anyone know how to perform this? Sorry for my bad English and thanks for your help in advance!!!

    Read the article

  • Network / Internet diagnostic tool to locate an error?

    - by Jesper
    Hi, I’m facing some difficulties with the Internet / network at my work and I have trouble locating the precise error and when and how it occurs. The problem is that the client machines in the house sporadic is disconnected to the Internet. I’m some what new so I haven’t that much inside in the network and apparently neither has my predecessor. What I am requesting and hoping you guys knows about is, if there exist some kind of network monitor tool I can install and run and it will periodically check the network, the Internet connection etc. and record to logs. Then, if there suddenly arises a problem some time of the day in some part of the network or the Internet connection, I can check it perhaps the next day. I’ve just downloaded and installed Microsoft Network Monitor 3.3 application and hopeful it can give me some answers on where the instability is located but I still would like a tool to make different checks and test in some time interval. Do anyone know about such a program or another kind of performance / diagnostic tool / method I can use? Sincere Jesper

    Read the article

  • Make Network Manager use bridge for PPPoE instead of only working on ethernet?

    - by Azendale
    My ISP uses PPPoE on their DSL connections. I use Network Manager to connect to this using a bridged modem connected to eth0. Often, I want to test networking things, so a set myself up a KVM machine with a tap interface. I can then connect these interfaces to to virtual 'switches' by adding them to bridges. (I work for my ISP). Sometimes, I want to test cases where the PPPoE is connected more than once. For this, I would like to be able to add eth0 to my 'switch' (a bridge) so the VMs can have a 'bridged modem' connection to the internet. But I would like to still be able to run the PPPoE for my computer at the same time. Which means that I need to get network-manager to run PPPoE over the bridge (or eth0). The problem is that it considers eth0 (and the bridge) 'not managed' by network manager, so it refuses to use it. So, how can I have network manager dial PPPoE over a bridge?

    Read the article

  • Bridging: Loosing WLAN network connection with 4addr on option - Why?

    - by WitchCraft
    Question: For use with my Xen VM, I need to create a virtual network interface (vif) that is bridged to wlan0. If in /etc/network/interfaces I add auto xenbr0 iface xenbr0 inet dhcp And then later do brctl addif xenbr0 wlan0 I get this error message. can't add wlan0 to bridge xenbr0: Operation not supported I found out that Linux won't let you bridge a wireless interface in managed mode at all unless you enable the 4addr option (needed to recompile iw): iw dev wlan0 set 4addr on Afterwards brctl addif xenbr0 wlan0 works, and brctl show shows xenbr0 as bridged to wlan0. Unfortunately, as soon as I execute iw dev wlan0 set 4addr on my entire network connection is gone (no connection). As soon as then I execute iw dev wlan0 set 4addr off I reconnect and it works again. If I re-execute 4addr on, it breaks again, if I execute 4addr off, it works again. Unfortunately, I can't just turn 4addr on, activate the bridge and then turn it back off (error: device not ready). Does anybody know why I loose my connection ?

    Read the article

  • Wireless Network Issue, Disconnecting Randomly From Network

    - by Surfer513
    I'm having an odd problem with my wireless network. Here is the background information: Server (Windows Server 2008) 1 to 10 end user machines connecting to the network Layer 3 Access Point (Asus WL-330 gE) connected to ethernet of Server and all machines connect to the network via the AP The end user machines get a connection to the server with no problems initially. But then connections are randomly lost throughout the day to the server/network. The wireless NICs of the machines still see the wireless network but are unable to connect to it. Then after some time the connection is regained automatically. I initially thought there was a problem with this particular AP, but then I took the same make/model AP out of storage and still ran into the problem. Any ideas what could be causing this??? Very confusing that the wireless nics on the end user machines can still see the network but not connect, and that the connections are randomly lost/gained. Thanks in advance!

    Read the article

  • Create personal wireless network on laptop

    - by TechGuru
    I have a WiFi Network, now I have connected my laptop to the WiFi Network. And it is working fine I'm able to access the internet via WiFi. But I want to create other network on my laptop so that I can connect my mobile phone to the my laptop network. Means, my laptop is already connected to WiFi network (xyz). Now I want to create one wireless network on my laptop. So that I can connect my mobile phone to laptop network and access the internet on mobile. But I don't want to lost my `laptop and WiFi connection that is already connected. I tried to create the wireless network on my laptop, but when I created my personal wireless network I lost my wifi-laptop connection. I don't know it is possible or not.

    Read the article

  • Beginner Geek: Scan Files for Viruses Before Using Them

    - by Mysticgeek
    To help avoid getting your computer infected by malicious software, it’s a good idea to scan files before executing them. Today we take a look at a couple of options that will let you scan files easily from your desktop. Scan File with Your Antivirus Software Most Antivirus software will put an option in the context menu so you can scan individual files. After downloading a file or email attachment, simply right-click the file and select the option to scan with your Antivirus software. If you want to scan more than one at a time, hold down the Ctrl key while you clicking each file you want to scan. Then right-click and select to scan with your Antivirus software. Here is our favorite Antivirus app, Microsoft Security Essentials scanning a couple of files. If a virus is found, your Antivirus app will delete it or put it in Quarantine so it cannot infect your system. Using VirusTotal Uploader To be very thorough and want a second opinion (actually 41), then you might want to check out the VirusTotal Uploader. This handy app will scan your files with 41 different Antivirus apps online. After installing VirusTotal Uploader, right-click the file, go to Send To, then VirusTotal. Alternately you can launch VirusTotal Uploader and Get and upload the file. It will send the file to VirusTotal.com and scan it with 41 different Antivirus apps and show you the results.   If you don’t want to install the Uploader, you can go to the VirusTotal site and upload a file from there to scan. We’ve noticed that occasionally there will be a false positive detected on files we know are clean. Sometimes the definition database of an Anti-malware app isn’t current, or an obscure Antivirus App will find something questionable. If that is the case, use your best judgment when viewing the results. Conclusion Most Antivirus apps today have real-time scanning and should be able to detect possible infections before you’re able to execute them. However, if they don’t or when in doubt, following these tips can save you a lot of headaches in the long run. If you use a lot of different flash drives throughout the day, check out our article on how to scan a thumb drive for viruses from the AutoPlay Dialog. Download Microsoft Security Essentials Download VirusTotal Uploader VirusTotal Website Similar Articles Productive Geek Tips Scan Files for Viruses Before You Download With Dr.WebMake Microsoft Security Essentials Scan Faster by Excluding Certain File TypesBeginner Geek: Delete User Accounts in Windows 7Scan Your Thumb Drive for Viruses from the AutoPlay DialogSecure Computing: Free Anti-Virus Protection With AVG Free Edition TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Video preview of new Windows Live Essentials 21 Cursor Packs for XP, Vista & 7 Map the Stars with Stellarium Use ILovePDF To Split and Merge PDF Files TimeToMeet is a Simple Online Meeting Planning Tool Easily Create More Bookmark Toolbars in Firefox

    Read the article

  • Scan disk runs on every boot with Windows XP

    - by Sarfraz Ahmed
    I have four drives on my computer. The problem is that each time I start the computer the scan disk check (CHKDSK) runs for a drive even if I shut down my computer properly. I ran the thorough scan disk check but still for that drive, the scan disk check is always performed no matter what. I wonder what is wrong although everything is fine and accessible along with drive data. Could you guys please help me out of this? I am using Windows XP SP2. Thanks.

    Read the article

  • Configure a wireless network that accepts any WPA2-PSK network key

    - by Michel
    I recently bought a UART WiFi module ( this one ) and configured it with right SSID but wrong password( and I don't know what it is ). The problem is that I can't reset this module to its manufacture settings and I can't connect to this module via serial port to configure it with some wire or cable. But I'm sure that my module is trying to connect my access point but with wrong network key ( because in logs of my access point I can see my module that trying to connect but it can't ) So, I wonder to know is there any way to create or configure a network (using some access point or something else) based on WPA2 Personal security that accepts any WPA2-PSK passwords ? Or is there any other solution for this problem ? If no, is there anyway to see what password this module using to connect to that network ? ( If yes, then I can change password of my network to that password and access to this module's admin panel ) I tried create an open network ( without any security key ) but my module just searches for WPA2 based networks ( I think ).

    Read the article

  • Not able to access other machines on network

    - by TheVillageIdiot
    Hi I'm running Windows 7 Enterprise (32bit) on my laptop. For some time I'm not able to access other machines using \\192.168.xxx.xxx. I've installed VM Ware player on my machine few days back but I don't remember if it happened just after that or there is some other reason behind it. EDIT:- I've disabled VMWare Bridge Protocol but still no effect. Please help me. PS:- I've used both wireless and wired networks. Network sharing is enabled and I can ping other machines but cannot access network shares. I get following message: \\xxx.xxx.xxx.xxx You might not have permission to use this network resource. Contact the administrator of this server to find out if you have acess permissions. The request is not supported. EDIT (2):- Network Discovery, File and Printer Sharing, Folder sharing are all on.

    Read the article

  • Why is it bad to map network drives in Windows?

    - by Beeblebrox
    There has been some spirited discussion within our IT department about mapping network drives. In particular, it has been said that mapping network drives is A Bad Thing and that adding DFS paths or network shares to your (Windows Explorer/Libraries) Favourites is a far better solution. Why is this the case? Personally I find the convenience of z:\folder to be better than \\server\path\folder', particularly with cmd line and scripting (of course I'm not talking about hard-coded links, naturally!). I have tried searching for pros and cons of mapped network drives, but I haven't seen anything other than 'should the network go down, the drive will be unavailable'. But this is a limitation of any network-accessed storage... I have also been told that mapped network drives poll the network when the network resource is unavailable, however I haven't found more information on this. Wouldn't this still be an issue with other network access mechanisms (that is, mapped Favourites) whenever Windows tries to enumerate the file system (for example, when a file/folder picker dialog is opened)? -- Do network drives poll the network any more than a Windows Explorer library/favourite?

    Read the article

  • Keep Xubuntu Network Manager from overwriting resolv.conf

    - by leeand00
    How do I keep Xubuntu 11.10 from overwriting resolv.conf everytime I reboot my machine? Everytime I reboot, I get an overwritten resolv.conf that has the words # Generated by Network Manager and no nameservers specified. I ran the following to get rid of Network Manager, but it's still replacing my resolv.conf when I restart the machine. sudo apt-get --purge remove network-manager sudo apt-get --purge remove network-manager-gnome sudo apt-get --purge remove network-manager-pptp sudo apt-get --purge remove network-manager-pptp-gnome

    Read the article

  • Beginner Geek: Scan a Document or Picture in Windows 7

    - by Mysticgeek
    There may come a time when you want to digitize your priceless old pictures, or need to scan a receipts and documents for your company. Today we look at how to scan a picture or document in Windows 7. Scanning Your Document In this example we’re using an HP PSC 1500 All-In-One printer connected to a Windows 7 Home Premium 32-bit system. Different scanners will vary, however the process is essentially the same. The scanning process has changed a bit since the XP days. To scan a document in Windows 7, place the document or picture in the scanner, click on Start, and go to Devices and Printers.   When the Devices and Printers window opens, find your scanning device and double-click on it to get the manufacturers Printer Actions menu. For our HP PSC 1500 we have a few different options like printing, device setup, and scanner actions. Here we’ll click on the Scan a document or photo hyperlink. The New Scan window opens and from here you can adjust the quality of the scanned image and choose the output file type. Then click the Preview button to get an idea of what the image will look like.   If you’re not happy with the preview, then you can go back and make any adjustments to the quality of the document or photo. Once everything looks good, click on the Scan button. The scanning process will start. The amount of time it takes will depend on your scanner type, and the quality of the settings you choose. The higher the quality…the more time it will take. You will have the option to tag the picture if you want to… Now you can view your scanned document or photo inside Windows Photo Viewer. If you’re happy with the look of the document, you can send it off in an email, put it on an network drive, FTP it… whatever you need to do with it. Another method is to place the document of photo you wish to scan in the scanner, open up Devices and Printers, then right-click on the scanning device and select Start Scan from the context menu. This should bypass the manufacturer screen and go directly into the New Scan window, where you can start the scan process. From the Context Menu you can also choose Scan Properties. This will allow you to test the scanner if you’re having problems with it and change some of its settings. Or you can choose Scan Profiles which allows you to use pre-selected settings, create your own, or set one as the default. Although scanning documents and photos isn’t a common occurrence as it was a few years ago, Windows 7 still includes the feature. When you need to scan a document or photo in Windows 7, this should get you started. Similar Articles Productive Geek Tips Easily Rotate Pictures In Word 2007Beginner Geek: Delete User Accounts in Windows 7Customize Your Welcome Picture Choices in Windows VistaSecure Computing: Detect and Eliminate Malware Using Windows DefenderMark Your Document As Final in Word 2007 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Creating a Password Reset Disk in Windows Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation" Enable or Disable the Task Manager Using TaskMgrED Explorer++ is a Worthy Windows Explorer Alternative Error Goblin Explains Windows Error Codes

    Read the article

  • Why are two indicator-network versions being worked on?

    - by Daniel Rodrigues
    Some months ago, on the road to Ubuntu Maverick, a new system indicator, network (with connman as a backend), started to be developed. The plan was to get it into UNE and release it with no notifcation area. Unfortunately it didn't make it into the final version. However, continued efforts are still being made to improve it, and I'm getting regular updates. From a blueprint from the last UDS, I read that the plan was to ship no notification area and only indicators. For that, it was defined that nm-applet (backend: NetworkManager) should be ported to the appindicator library. Today I discovered that those efforts are going on and a initial version is available for testing, available from Matt Trudel PPA (Natty only). So, my questions is, to whoever has the necessary info: wouldn't it be easier to join efforts and concentrate the work in just one version (probably NetworkManager backend, as that's the official plan), instead of breaking those efforts apart and hampering both testing and developing? Both indicators are being developed by Canonical engineers, and that really doesn't make much sense. So, any Canonical engineer willing to clarify this?

    Read the article

  • 12.04 wired network doesn't work RTL8111/8168B

    - by laket
    its a fresh 12.04 install 64bits. wifi works fine, wired stays off with cable connected and network-manager shows as if cable is disconnected. Turning off networking lights up my network-cards leds, turning networking on shuts off the leds and no communication is possible. I already tried, turning off the network-manager (sudo service network-manager stop) and setting up my eth0 manually, as soon as I switch off the network-manager my leds light up, but after setting up manually eth0 (sudo ifconfig eth0 10.2.10.114 netmask 255.255.0.0 up) the leds turn off again. I am still dual booting with 10.04 where I have no issues at all, leaving the cable connected all time to my notebook and a switch. Here is some hardware info: lshw: *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 03 serial: c8:0a:a9:d7:05:97 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8168d-2.fw latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:2000(size=256) memory:f0004000-f0004fff memory:f0000000-f0003fff memory:f0010000-f001ffff lspci: 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) ifconfig eth0: eth0 Link encap:Ethernet HWaddr c8:0a:a9:d7:05:97 inet addr:10.2.10.114 Bcast:10.2.255.255 Mask:255.255.0.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:42 Base address:0xc000 cat /etc/network/interfaces: (already tried here with and w/o eth0) auto lo eth0 iface lo inet loopback cat /etc/NetworkManager/NetworkManager.conf [main] plugins=ifupdown,keyfile dns=dnsmasq [ifupdown] managed=false Any help is welcome ;) Laket

    Read the article

  • How do I ban a wifi network in Network Manager?

    - by Chris Conway
    My wifi connection drops sometimes and, for some reason, Network Manager attempts to connect to my neighbor's network, which requires a password that I don't know. The network in question is not listed in the "Edit Connections..." dialog and I can find no reference to it in any configuration file, but still the password dialog pops up every time my main connection drops. Is there a way to blacklist a wireless network so that the Network Manager will never attempt to connect to it? Or, equivalently, how can I remove the configuration data that causes the Network Manager to attempt to connect to this particular network?

    Read the article

  • Adding network share as the system account breaks Win7 backup to network

    - by ChrisBenn
    (On Win7 Ultimate x64 SP1) So I've been using Win7 backup to \192.168.0.100\Backup\main-desktop\ for awhile without issue. Yesterday I tried to setup crashplan to synchronize my dropbox folder and a network share. I then found out that crashplan, as it runs under the system account, can't see my user mapped drives. So I created a startup script net use O: \192.168.0.100\Documents /USER:192.168.0.100\username password and set it to run, on startup, after the network interface is up, as the system account. (the username & password are the same for the net use script above, the locally logged in user, and the explicit username/password entered in windows backup). I woke up this morning to find error flags from the windows backup and get "Network location cannot be used" (0x800704B3). If I disable the startup task & reboot then windows backup works fine. I'm not sure why having a mapped drive for another user is killing windows backup (same server, different folder). I can work around the issue by using another program to synchronize the two folders, but I'm completely in the dark as to why this happens (and it's 100% repeatable). Uninstalling the crashplan client doesn't change anything - it's the net use run under the system account that breaks win7 backup (to a network location).

    Read the article

  • Which network performance management software do you use?

    - by Jamie Keeling
    Hello, I am looking at the various options available for network performance management software, some of the solutions I've found so far are: Proprietary: HP - ProCurve Universal: SolarWinds - Orion Open Source: OpenNMS I am trying to discover the benefits of each package over the other and reasons as to why you would go for one (Such as size of the network, overall cost etc..). I'm curious as to which ones other people use and why? Each customer has their own needs and requirements and it would be great to hear some of yours. Thank you for your time.

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >