Search Results

Search found 151 results on 7 pages for 'nomodeset'.

Page 1/7 | 1 2 3 4 5 6 7  | Next Page >

  • Ubuntu 12.04 nomodeset fixes boot problem but causes screen resolution to get stuck

    - by Thunder
    I've been searching the askubuntu forum for the past 3 days trying to figure out what's going on with my system and I have tried a lot of things but to no avail. So, I will explain my situation and tell you what I have tried and I hope someone can help me :) I have an: HP Workstation xw4100 Pentium(R) 4 3.00 GHz 1.5 GB RAM NVIDIA Quadro4 380 XGL graphics card It came with Windows XP and I set it up (with WUBI) to dual boot with Ubuntu 12.04 After installation I had the problem that so many people had with it booting to a black screen (mine was actually booting to the terminal basic shell) that is fixed by adding nomodeset into the grub. When I do that, MY screen resolution becomes stuck in 1280x768 (as opposed to 1366x768 before adding nomodeset) (and also, when running XP the best resolution is 1280x720) When I go to "additional drivers" it doesn't show any proprietary drivers, so I manually downloaded them using this command: sudo apt-add-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current but after rebooting, that made the graphics even worse (now stuck as 800x600) SO I tried to configure the drivers with sudo nvidia-xconfig but that simply created an empty xorg.config file. I found one place where a guy gave information to manually input into the xorg.config file but that had no effect at all. Lastly I tried to install previous versions of the NVIDIA drivers, but they wouldn't even fully install. So now I have just re-installed Ubuntu 12.04 and I either need to find a better solution to the first problem (nomodeset) or get the nouveau driver to correctly configure to work with my nvidia graphics. Thanks for your help ahead of time!

    Read the article

  • Colored Vertical Lines upon boot and nomodeset DOES NOT fix it

    - by user2851032
    I have installed Lubuntu 13.04 on a Dell Inspiron 1501 laptop, rebooted the machine and encountered this problem. I edited the GRUB configuration to remove "quite splash" and enter "nomodeset", updated grub, and everything was fine. I could reboot the machine without any trouble. However, if I unplug the machine, wait a few seconds, and plug it back in, the problem with the colored lines comes back and nomodeset no longer helps to solve the problem. I tried using radeon.modeset=0 instead of nomodeset and that also works on multiple reboots until I unplug the machine and plug it back in. I was finally able to get around the problem by entering "radeon.exapixmaps=0" instead of radeon.modeset=0. I suppose I kind of made up that boot option using some information from an Arch Wiki page. This would work throughout reboots and even if I unplugged the laptop. It was working fine for quite a while. A few weeks later, I had some unrelated issues with the Java iced-tea plugin, and since 13.10 had just come out, I thought I would try upgrading. So upgrading didn't fix the problem with Java, and after unplugging the machine and trying to use it later, I was back to this problem with the black screen and colored vertical lines. I am completely out of ideas on what to try. It took me a week to figure out how to get it working the first time, but the solution I had isn't working anymore.

    Read the article

  • Boot ubuntu 12.04 in 3D - nomodeset quiet splash install

    - by rahi
    I would like to enable 3D in Ubuntu 12.04. I recently tried to install ubuntu on a new computer. When the installation was complete and I rebooted the machine, I could only see a blank screen. After some searching, I followed this tutorial which instructed me to boot with "nomodeset" enabled. I choose this on the USB I was installing ubuntu 12.04 from. Fortunately, the ubuntu installation on the new computer was successful. When I tried to change the size of the unity launcher icons, I did not see that option (as I see on my other computer running ubuntu 12.04). I tried installing MyUnity and it told me that the computer I had just installed 12.04 to was running in 2D. To my knowledge. all the software is up to date (as I ran the Software Updater). In addition, when I look for Additional Drivers, I see a message that says "No proprietary drivers are in use on this system". When I look under System Details Graphics, I see the Driver as "VESA:Intel Sandybridge/Ivybridge Graphics. When I hold the shift key on when my machine boots up, and type "e" on the Grub menu, I see the following towards the end, "nomodeset quiet splash $vt_handoff". Does this have anything to do with the plain 2D ubuntu 12.04 experience? Again, what I'd like to do now is get the 3D experience on my new machine running 12.04. Please let me know if you need more information.

    Read the article

  • Set nomodeset in usb installation (efi loader with iso)

    - by Garrett
    I'm working with the studyblast solution (http://studyblast.wordpress.com/2011/08/14/guide-mac-os-x-lion-how-to-boot-a-linux-live-system-from-a-usb-drive-how-to-update-any-ocz-ssds-firmware/) to creating a live usb for osx. I managed to get Ubuntu booted but the screen looks like a corrupt/glitch image. I can just about make out the clock on the bottom right and a few icons. I've been told that this is an easy fix and that nomodeset needs to be set for the graphics card but all the solutions i find are for a hard drive installed Ubuntu where you can cd in and edit the grub file - how do you do this is it's in an iso? Thanks Garrett

    Read the article

  • Nomodeset Installation

    - by Camacho3112
    I were following the address from Coldfish on How to set nomodeset, but I don't know how to "save" the changes made to the line GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset" I hit CTRL+O to save and get File Name to write: /etc/default/grub AND typed sudo update-grub AND hit ENTER. After that, I open another Terminal an type: sudo update-grub (ask me for password) and them I got this: joseluis@ubuntu:~$ sudo update-grub [sudo] password for joseluis: Generating grub.cfg ... cat: /boot/grub/video.lst: No such file or directory Found linux image: /boot/vmlinuz-2.6.38-12-generic Found initrd image: /boot/initrd.img-2.6.38-12-generic Found linux image: /boot/vmlinuz-2.6.38-8-generic Found initrd image: /boot/initrd.img-2.6.38-8-generic Found Windows 7 (loader) on /dev/sda1 Found Ubuntu 10.04 LTS (10.04) on /dev/sda6 done joseluis@ubuntu:~$ SO: Were I'm? Were is my direction now? Thanks for the help.

    Read the article

  • Ubuntu 12.04 Install - Black Screen - No Grub - Have run Boot Repair Disk

    - by Pat
    Day 4 of my purgatory. History: Had problems with live CD at first, had to set the "nomodeset" option ... and then it worked fine. Installed Ubuntu "Alongside" Windows XP from live CD (NOT wubi) Upon reboot after installation, I get the BIOS ... and then a black screen. If I hit shift after the BIOS screen I get text that says "loading GRUB ..", but then no GRUB ... just a black screen. What I have tried to do: Total re-installation ... 3 times now. Also tried with wubi, same black screen. Have gone back to the normal (non-wubi) install. After installation, I tried re-booting the live cd ... and trying to change GRUB file using: sudo gedit /etc/default/grub ... to "nomodeset" and "timeout=10" ... but won't let me save my changes because I'm using the live cd "in memory" system and don't have permissions to the disks (I think). I tried logging in ... but it won't let me. I then read many posts on this site. I'm stuck. This morning, I ran the "boot repair disk". Results here: http://paste.ubuntu.com/1132333/ What I think is wrong: Since I can get the live CD to run (perfectly) with the "nomodeset" option, I think all I need to do is get to GRUB to change that ... but I can't get to GRUB. Appreciate any advice. Pat Day 5 ... I downloaded "Super Grub 2 Disk" from: http://www.supergrubdisk.org/super-grub2-disk/ This looks promising. I can boot the disk and it brings me to a GRUB program that allows me to: 1) Boot to Windows ... which works 2) Boot to Ubuntu ... which does NOT work When I choose boot to Ubuntu, I get lines across the screen which is an obvious video card problem. Likely because I need to set the "nomodeset" option. So, I attempted to use super grub2 to edit the grub file ... but it is TOTALLY different than the Ubuntu grub file ... and I don't know where to put the "nomodeset" option. Still stuck ... The bottom line is that: 1) I need to edit /etc/default/grub on sda(1) ... which is my boot drive ... to add the "nomodeset" option 2) To do that I need to get into grub ... but, I can't. Holding down shift just echo's "loading grub .." and then takes me to a black screen 3) I can boot to the live CD by setting nomodeset .... but I cannot access the hard disk as root ... I can't save my changes! Can anyone tell me how to login as root for the filesystem from the live CD ... so I can edit the grub file on the HARD DISK ... and then run update-grub??

    Read the article

  • Problems after installing Ubuntu 11.10

    - by Andrew Orr
    I'm having trouble with Ubuntu 11.10. It has to do with nomodeset. After I boot into Ubuntu, it goes to a purple screen for about 10 seconds and then goes blank. After that nothing happens. I've read other people's questions about this and I know it has to do with enabling nomodeset. This worked for me when I was using the LiveCD mode, but now Ubuntu is permanently installed as a dual-boot system. Going into recovery mode doesn't work, pressing "e" in the boot loader and writing nomodeset after quiet splash doesn't work either. Holding shift any time it's booting doesn't work. I don't know what to do anymore. I have an HP Pavilion dv6 laptop with an AMD A6-3400M CPU, and my GPU is an AMD Radeon HD 6520G. I've never worked with Linux before so taking me through this step-by-step would be great. Thanks!

    Read the article

  • Will the Driver Support for Intel HD Graphics be Improved in 12.10?

    - by Hiranya
    I recently installed Ubuntu 12.04 on a HP Pavilion dv4 laptop. This is a core i7 machine with Intel HD graphics and also a separate nVidia VGA card. I had a lot of issues getting Ubuntu 12.04 working on this system. First there were issues booting up the live CD for installation. I worked around that by using the 'nomodeset' option. Then I continued to have similar issues after installation has completed. So I had to permanently add the nomodeset option to my GRUB boot configuration. At the moment I have a working installation but there are many issues: Ubuntu GUI is a bit flaky at times. The mouse pointer goes on and off when hovering over certain icons. Certain things doesn't get rendered properly on the screen. I can't access any of the tty consoles. Hitting Ctrl+Alt+F[1-6] gives me a blank screen. And once that happens I can't even come back to the UI by hitting Ctrl+Alt+F7. I've realized that tty consoles are actually working. I just can't see the text. If I enter a command like 'sudo reboot' into the empty screen the machine reboots. Can't get external displays (monitors, projectors etc) working. But I think this is probably because the VGA out is wired to the nVidia card which is not being used by Linux. colord program crashes every now and then triggering a popup message. So my main question is, will the support for Intel HD graphics be improved in the next release? Or will I have to keep using the nomodeset option in the new release too? Also I appreciate if anybody can shed some light on any of the issues listed above. Thanks in advance.

    Read the article

  • ubuntu 12.04 install black screen

    - by Tara Scarborough
    When I try to install Ubuntu 12.04 i get the grub 1.99 screen that allows me to select ubuntu install, or try ubuntu with out installing. When i select install ubuntu the screen goes black and i can tell the hard drive is running, but there are no on screen prompts. I looked into this problem and attempted to change a few variables by pressing "e" to edit the ubuntu install boot screen I then changed splash to nospash, quiet to noquiet, and add nomodeset at the end of the line that starts with linux before the "--". This still changes nothing when i press F10 to boot. I have tried removing quiet and splash altogether and adding nomodeset, but still to no avail. I am a little frustrated and don't know what to do. Any help would be greatly appreciated! The system is brand new - no OS: Hardware: Zotac ZBOX ZBOX-ID81-PLUS-U Nettop Computer - Intel Celeron 857 1.20 GHz - 8 GB RAM - 320 GB HDD - Intel Graphics Media Accelerator HD Graphics Card

    Read the article

  • Strange resolution on Ubuntu 11.10

    - by FSchmidt
    I only just installed Ubuntu 11.10, so excuse me if this question is silly ;-) I have a Fujitsu Esprimo Mobile V655, nvidia 8200 graphics, and recently installed Ubuntu 11.10 using wubi. I had to modify booting commands to include nomodeset; otherwise Ubuntu would not boot. Now I did set my screen resolution to 1280 x 720, which is the correct resolution for this screen. Still, the display seems imperfect. The font sizes seem unnatural(too large / stretched) and text is quite blurry (especially in Firefox). Could it have something to do withe the nvidia graphics driver and/or the nomodeset parameter? How can I fix this? Update: I used jockey-gtk to update nvidia to the current version. This improved the resolution dramatically (no blurriness, fonts are good). It also means that I no loger need to include nomodesetin the boot commands. However, other problems were brought up by this. It seems that certain files cannot be accessed - icon (images) are missing, some task bars are completely unstyled (grey, block-form, win97 style). I also get this error message(roughly translated from German, so may be slightly different from actual) every time I reboot: Could not apply the stored configuration for the monitor: none of the chosen modi is compatible with the available modi. I have tried nvidia-xconfig, unity --reset , no improvements. Can anyone help, please?

    Read the article

  • Unable to boot into 11.10 in normal (get a black screen) OR recovery (get just a flashing cursor, no cli)

    - by user1092284
    Okay, so I had a dual boot of Tango Studio (based on Ubuntu 10.04) and Windows XP. Yesterday I downloaded the .iso for Ubuntu 11.10 and attempted to install from a USB (my BIOS won't normally boot from USB but I had PLOP boot manager on a CD). I booted up Ubuntu from the USB and then from there formatted the partition with Tango on and installed Ubuntu 11.10. On booting up I came into Grub rescue mode. So I booted up from the USB again and used boot-repair to reinstall Grub. After this I would see the normal Grub menu, but on choosing Ubuntu I would come to a black screen. On choosing recovery mode it would begin starting normally with no obvious errors but instead of coming to a cli I would just get a blank screen with a flashing cursor on the top left, not accepting any input. I have since reformatted and reinstalled from a CD rather than USB and had the exact same problem. I used boot-repair again and the result is the same. Output of the most recent boot-repair is at http://paste.ubuntu.com/869805/ I have also tried editing the ubuntu grub entry and replacing quiet with text nomodeset as I saw in an answer to another question. This got me a bit further - I saw the purple ubuntu loading screen but still came to a blank screen after that. Anyway, in most of the other questions in which that is brought up the user is still able to boot into recovery, while I am not. Can anyone help? Thanks in advance, let me know if there's any more info I need to provide! EDIT FOR MORE INFO: I read something saying it's quiet splash that should be replaced with nomodeset. Earlier I had left splash in the line. So i tried it this way and it froze after displaying the following text: fsck from util-linux 2.19.1 mountall: Plymouth command failed mountall: Disconnected from Plymouth /dev/sda5:clean, 139359/1741488 files, 745830/6961125 blocks From a bit of googling it doesn't look like plymouth is essential, but I've checked and I do have the most current versions of mountall and plymouth installed so I don't know why there's a problem EDIT FOR MORE INFO AGAIN: I used dkpg --reconfigure plymouth cause I saw it mentioned in another forum and it still says plymouth command failed on boot

    Read the article

  • I need acpi=off to boot, but this seems to disable wifi

    - by TheExp3rt
    To boot my computer, I have to use acpi=off in kernel options. Doing this apparently causes my wifi adapter to be switched off and prevents my mouse and USB keyboard to not work. If I change acpi=off to nomodeset, it fixes these problems. But then it sets my computer at a lower resolution. I am currently running Kubuntu 13.10, although none of the updates, starting from 12.04, changed the need for acpi=off. I assume I need acpi=off in because I have an oldish computer with an intel motherboard How can I boot without acpi=off? Output of uname -a: 3.11.0-13-generic #20-Ubuntu SMP Wed Oct 23 07:38:26 UTC x86_64 x86_64 x86_64 GNU/Linux

    Read the article

  • Black screen after select installing on a Dell Inspiron 14z

    - by Rodrigo
    I'm trying to do a dual boot on my Dell Inspiron 14z notebook, but I always get a black screen after selecting Install Ubuntu. I've tried to add nomodeset and acpi_osi="Linux" to the boot options, but it doesn't change anything. The hardware: 3rd Generation Intel® Core™ i7-3517U processor (4M Cache, up to 3.0 GHz) 8GB2 Dual Channel DDR3 SDRAM at 1600MHz 500GB 5400 RPM SATA HDD and 32GB mSATA SSD AMD Radeon HD7570M 1GB This question isn't duplicated. I've already tested all tips in the following question! My computer boots to a black screen, what options do I have to fix it?

    Read the article

  • Live CD / Live USB much faster than full install

    - by user29347
    I've observed it on both laptops I own! HP Compaq nx6125 and Ubuntu 11.04 x64 - somewhat solved Lenovo Thinkpad T500 and Ubuntu 11.10 x64 - help needed! I'm still struggling with the Thinkpad to get performance level similar to that of 10 y.o. laptops... All in all a really serious issue with multiple versions of Ubuntu that renders computers with perfectly compatible hardware unusable, as far as out of the box experience is concerned. Troubleshooting resultant issues seems to be a hard case even for users with some experience with installing graphics drivers. EDIT: I can't really post additional details. Two different ubuntu versions, two laptops, two different set of graph. drivers (OS vs ATI prop.) - all with the same symptoms. Also I can't stress enough how massive the performance degradation is compared to a healthy system. For that reason I ask for input from people who may know roughly what are we dealing with here. I can post more details if we were to focus on my current Thinkpad T500. In that case my current system details: Lenovo Thinkpad T500 Ubuntu 11.10 x64 ATI Mobility Radeon HD 3650 (also see the "What I have already tried" section about Intel graphics tested) ATI Catalyst 11.10 drivers OCZ Agility 3 SSD but! same with the default driver for ATI the card same with the prop. driver for the ATI card from Jockey (Additional drivers applet) What I have already tried: 0. Switching to Intel integrated card (Intel GMA 4500M HD) with the default driver - same effects = may indicate not driver related problem but a problem with something of global influence like e.g. nomodeset or other I don't even know about. (What you can read above) ATI Catalyst 11.10 and radeon.modeset=0 boot parameter + disabled Wait for VBlank. Unity 2D Ubuntu 10.04 LTS tested (ubuntu-10.04.3-desktop-i386.iso): Both live USB and installed version blazing fast! (on the default drivers - without even installing the proprietary fglrx drivers). re2 a) seems to give me the only significant results (still poor) - perfect Unity elements performance with the same crawling stuttering/lagging when dragging windows around. re2 b) this happens often http://i17.photobucket.com/albums/b68/Bucic/ubuntuforumsorg/Screenshotat2011-10-28083140.png re2 c) Sometimes I am able to witness a normal performance when dragging a window around but only for a second or two. When I try to shake it longer it starts to lag and it will keep lagging like that with an increased probability of what you see in the sshot in point re2 b). re2 d) I can't establish the radeon.modeset=0 influence though. Once it seems to work be smooth with it, the other time - without it. Really can't tell.

    Read the article

  • Ubuntu 12.10 not working on UX32VD after update to beta 1 [closed]

    - by bquast
    Possible Duplicate: There's an issue with an Alpha/Beta Release of Ubuntu, what should I do? In my previous question I described my problem with starting / returning from suspend using Ubuntu on the Asus UX32VD (Zenbook). This problem could be solved by using Ubuntu 12.10 (alpha), however since the upgrade to beta 1 the old problem of starting / returning from suspend has returned. I found that starting in recovery does work, but this of course does not solve the problem. Any thoughts?

    Read the article

  • Multiple problems while installing Ubuntu 13.04 on LENOVO G500 laptop

    - by Balazs Kiss
    Dear Community, I encountered several problems when installing Ubuntu on my new Lenovo G500 laptop. First I bumped in the problem (also reported by many other) of the black screen after booting Ubuntu. This problem I recould solve by changing the "quiet splash" record of GRUB to "nomodeset". Ubuntu install was successful then. After the installation, I had a black screen again when booting up for the first time. I booted up again with "nomodeset", and enabled the external AMD driver at Hardware Drivers. Booting still do not worked (only with nomodeset), and when I log in, the system gives me a "System program problem detected" message, and the system (desktop) does not load in. Please, can you advise me what to do? Shall I re-install Ubuntu? What are the steps to make my ubuntu work with this harver? Hardware: LENOVO G500 with IntelCore i5-3230M 3,2Ghz processor and AMD Radeon HD8570 integrated chip Thank you for your help in advance!

    Read the article

  • unable to load nvidia(bumblebee) in ubuntu 14.04 (only nouveau loads)

    - by Ubuntuser
    Bumblebee stopped working on my system after upgrading to stable version of Ubuntu 14.04. DUring installation I get this error rmmod: ERROR: Module nouveau is in use Setting up bumblebee (3.2.1-90~trustyppa1) ... Selecting 01:00:0 as discrete nvidia card. If this is incorrect, edit the BusID line in /etc/bumblebee/xorg.conf.nouveau . bumblebeed start/running, process 11133 Processing triggers for initramfs-tools (0.103ubuntu4.1) ... update-initramfs: Generating /boot/initrd.img-3.14.1-031401-generic Setting up bumblebee-nvidia (3.2.1-90~trustyppa1) ... Selecting 01:00:0 as discrete nvidia card. If this is incorrect, edit the BusID line in /etc/bumblebee/xorg.conf.nvidia rmmod: ERROR: Module nouveau is in use bumblebeed start/running, process 18284 It says nouveau is in use. I checked the loaded modules lsmod | grep nouveau nouveau 1097199 1 mxm_wmi 13021 1 nouveau ttm 85115 1 nouveau i2c_algo_bit 13413 2 i915,nouveau drm_kms_helper 52758 2 i915,nouveau drm 302817 7 ttm,i915,drm_kms_helper,nouveau wmi 19177 3 dell_wmi,mxm_wmi,nouveau video 19476 2 i915,nouveau However, I have nouveau in my blacklist cat /etc/modprobe.d/blacklist.conf | grep nouveau blacklist nouveau blacklist lbm-nouveau alias nouveau off alias lbm-nouveau off My grub is also set to nomodeset cat /etc/default/grub | grep nomodeset GRUB_CMDLINE_LINUX_DEFAULT="nomodeset quiet splash" My graphics card is nvidia optimus lspci | grep -i vga 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 01:00.0 VGA compatible controller: NVIDIA Corporation GT218M [GeForce 310M] (rev ff) I've raised a bug in launchpad: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1327598 Note: Nvidia-prime is working for me (partially). Frequent mouse locks. Interestingly, bumblebee works perfectly fine on my fedora 20 partition on this same laptop.

    Read the article

  • Black screen after grub kernal selection menu

    - by skip
    I have an Acer eMachines e727 with Intel GMA 4500M integrated graphics (drivers updated to latest). I installed Ubuntu 12.04 using Wubi. All is well until I select the kernal (first one on the list). My display goes black. I searched for solutions and found one on Unbuntu forum which partially helped. Following that sticky post, I pressed "e" at the kernal listings. I changed the $Linux... default line to "quiet splash nomodeset" and was able to get to the login screen and desktop. I edited grub to make the nomodeset permanent (also removed the vt command as recommended). I followed through with changing grub to match the graphics as recommended in the article using the grub cli (using info from vbeinfo). I updated grub with the recommended settings but still get the black screen after selecting the kernal. Only nomodeset works to get me to the login and desktop. Once I get to the desktop, my display resolution shows being set to 1024x768 but it actually looks like 800x680. What do I need to do to get past these issues? Thanks!

    Read the article

  • How to get rid of grub menu after boot?

    - by umpirsky
    Here is my /etc/default/grub: # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX="" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_LINUX_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" I tried various things including: How do I hide the GRUB menu showing up in the beginning of boot? How to disable Grub's menu from showing up after failed boot http://www.itworld.com/software/306238/disable-grub-boot-menu-ubuntu-1210 But I still get grub menu each time I boot. My generated /boot/grub/grub.cfg: # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi if [ "${next_entry}" ] ; then set default="${next_entry}" set next_entry= save_env next_entry set boot_once=true else set default="0" fi if [ x"${feature_menuentry_id}" = xy ]; then menuentry_id_option="--id" else menuentry_id_option="" fi export menuentry_id_option if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { if [ x$feature_all_video_module = xy ]; then insmod all_video else insmod efi_gop insmod efi_uga insmod ieee1275_fb insmod vbe insmod vga insmod video_bochs insmod video_cirrus fi } if [ x$feature_default_font_path = xy ] ; then font=unicode else insmod part_gpt insmod ext2 if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root ed6b32bc-ec1d-444c-a000-282fddd6d460 else search --no-floppy --fs-uuid --set=root ed6b32bc-ec1d-444c-a000-282fddd6d460 fi font="/usr/share/grub/unicode.pf2" fi if loadfont $font ; then set gfxmode=auto load_video insmod gfxterm set locale_dir=$prefix/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ] ; then set timeout=-1 else if [ x$feature_timeout_style = xy ] ; then set timeout_style=hidden set timeout=0 # Fallback hidden-timeout code in case the timeout_style feature is # unavailable. elif sleep --interruptible 0 ; then set timeout=0 fi fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 45,51,53; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-ed6b32bc-ec1d-444c-a000-282fddd6d460' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root ed6b32bc-ec1d-444c-a000-282fddd6d460 else search --no-floppy --fs-uuid --set=root ed6b32bc-ec1d-444c-a000-282fddd6d460 fi linux /boot/vmlinuz-3.13.0-29-generic.efi.signed root=UUID=ed6b32bc-ec1d-444c-a000-282fddd6d460 ro quiet splash $vt_handoff initrd /boot/initrd.img-3.13.0-29-generic } submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-ed6b32bc-ec1d-444c-a000-282fddd6d460' { menuentry 'Ubuntu, with Linux 3.13.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-advanced-ed6b32bc-ec1d-444c-a000-282fddd6d460' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root ed6b32bc-ec1d-444c-a000-282fddd6d460 else search --no-floppy --fs-uuid --set=root ed6b32bc-ec1d-444c-a000-282fddd6d460 fi echo 'Loading Linux 3.13.0-29-generic ...' linux /boot/vmlinuz-3.13.0-29-generic.efi.signed root=UUID=ed6b32bc-ec1d-444c-a000-282fddd6d460 ro quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-recovery-ed6b32bc-ec1d-444c-a000-282fddd6d460' { recordfail load_video insmod gzio insmod part_gpt insmod ext2 if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root ed6b32bc-ec1d-444c-a000-282fddd6d460 else search --no-floppy --fs-uuid --set=root ed6b32bc-ec1d-444c-a000-282fddd6d460 fi echo 'Loading Linux 3.13.0-29-generic ...' linux /boot/vmlinuz-3.13.0-29-generic.efi.signed root=UUID=ed6b32bc-ec1d-444c-a000-282fddd6d460 ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-advanced-ed6b32bc-ec1d-444c-a000-282fddd6d460' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root ed6b32bc-ec1d-444c-a000-282fddd6d460 else search --no-floppy --fs-uuid --set=root ed6b32bc-ec1d-444c-a000-282fddd6d460 fi echo 'Loading Linux 3.13.0-24-generic ...' linux /boot/vmlinuz-3.13.0-24-generic.efi.signed root=UUID=ed6b32bc-ec1d-444c-a000-282fddd6d460 ro quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-24-generic } menuentry 'Ubuntu, with Linux 3.13.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-recovery-ed6b32bc-ec1d-444c-a000-282fddd6d460' { recordfail load_video insmod gzio insmod part_gpt insmod ext2 if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root ed6b32bc-ec1d-444c-a000-282fddd6d460 else search --no-floppy --fs-uuid --set=root ed6b32bc-ec1d-444c-a000-282fddd6d460 fi echo 'Loading Linux 3.13.0-24-generic ...' linux /boot/vmlinuz-3.13.0-24-generic.efi.signed root=UUID=ed6b32bc-ec1d-444c-a000-282fddd6d460 ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-24-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry 'Ubuntu 14.04 LTS (14.04) (on /dev/mapper/isw_beaaegcdjh_ASUS_OS2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-ed6b32bc-ec1d-444c-a000-282fddd6d460' { insmod part_gpt insmod ext2 if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root ed6b32bc-ec1d-444c-a000-282fddd6d460 else search --no-floppy --fs-uuid --set=root ed6b32bc-ec1d-444c-a000-282fddd6d460 fi linux /boot/vmlinuz-3.13.0-29-generic.efi.signed root=UUID=ed6b32bc-ec1d-444c-a000-282fddd6d460 ro splash quiet quiet splash $vt_handoff initrd /boot/initrd.img-3.13.0-29-generic } submenu 'Advanced options for Ubuntu 14.04 LTS (14.04) (on /dev/mapper/isw_beaaegcdjh_ASUS_OS2)' $menuentry_id_option 'osprober-gnulinux-advanced-ed6b32bc-ec1d-444c-a000-282fddd6d460' { menuentry 'Ubuntu (on /dev/mapper/isw_beaaegcdjh_ASUS_OS2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-29-generic.efi.signed--ed6b32bc-ec1d-444c-a000-282fddd6d460' { insmod part_gpt insmod ext2 if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root ed6b32bc-ec1d-444c-a000-282fddd6d460 else search --no-floppy --fs-uuid --set=root ed6b32bc-ec1d-444c-a000-282fddd6d460 fi linux /boot/vmlinuz-3.13.0-29-generic.efi.signed root=UUID=ed6b32bc-ec1d-444c-a000-282fddd6d460 ro splash quiet quiet splash $vt_handoff initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-29-generic (on /dev/mapper/isw_beaaegcdjh_ASUS_OS2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-29-generic.efi.signed--ed6b32bc-ec1d-444c-a000-282fddd6d460' { insmod part_gpt insmod ext2 if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root ed6b32bc-ec1d-444c-a000-282fddd6d460 else search --no-floppy --fs-uuid --set=root ed6b32bc-ec1d-444c-a000-282fddd6d460 fi linux /boot/vmlinuz-3.13.0-29-generic.efi.signed root=UUID=ed6b32bc-ec1d-444c-a000-282fddd6d460 ro splash quiet quiet splash $vt_handoff initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-29-generic (recovery mode) (on /dev/mapper/isw_beaaegcdjh_ASUS_OS2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-29-generic.efi.signed-root=UUID=ed6b32bc-ec1d-444c-a000-282fddd6d460 ro recovery nomodeset splash quiet-ed6b32bc-ec1d-444c-a000-282fddd6d460' { insmod part_gpt insmod ext2 if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root ed6b32bc-ec1d-444c-a000-282fddd6d460 else search --no-floppy --fs-uuid --set=root ed6b32bc-ec1d-444c-a000-282fddd6d460 fi linux /boot/vmlinuz-3.13.0-29-generic.efi.signed root=UUID=ed6b32bc-ec1d-444c-a000-282fddd6d460 ro recovery nomodeset splash quiet initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-24-generic (on /dev/mapper/isw_beaaegcdjh_ASUS_OS2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-24-generic.efi.signed--ed6b32bc-ec1d-444c-a000-282fddd6d460' { insmod part_gpt insmod ext2 if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root ed6b32bc-ec1d-444c-a000-282fddd6d460 else search --no-floppy --fs-uuid --set=root ed6b32bc-ec1d-444c-a000-282fddd6d460 fi linux /boot/vmlinuz-3.13.0-24-generic.efi.signed root=UUID=ed6b32bc-ec1d-444c-a000-282fddd6d460 ro splash quiet quiet splash $vt_handoff initrd /boot/initrd.img-3.13.0-24-generic } menuentry 'Ubuntu, with Linux 3.13.0-24-generic (recovery mode) (on /dev/mapper/isw_beaaegcdjh_ASUS_OS2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-24-generic.efi.signed-root=UUID=ed6b32bc-ec1d-444c-a000-282fddd6d460 ro recovery nomodeset splash quiet-ed6b32bc-ec1d-444c-a000-282fddd6d460' { insmod part_gpt insmod ext2 if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root ed6b32bc-ec1d-444c-a000-282fddd6d460 else search --no-floppy --fs-uuid --set=root ed6b32bc-ec1d-444c-a000-282fddd6d460 fi linux /boot/vmlinuz-3.13.0-24-generic.efi.signed root=UUID=ed6b32bc-ec1d-444c-a000-282fddd6d460 ro recovery nomodeset splash quiet initrd /boot/initrd.img-3.13.0-24-generic } } set timeout_style=menu if [ "${timeout}" = 0 ]; then set timeout=10 fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/30_uefi-firmware ### menuentry 'System setup' $menuentry_id_option 'uefi-firmware' { fwsetup } ### END /etc/grub.d/30_uefi-firmware ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f ${config_directory}/custom.cfg ]; then source ${config_directory}/custom.cfg elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ###

    Read the article

  • Problems with Intel Video Resolution on Acer Laptop Wide Display

    - by ricstr
    I have an ACER Aspire 5332 laptop which I have just installed Ubuntu 12.04 x64, which is causing some issues with the video display on boot and video resolution. First and foremost, it will only boot past the purple screen if GRUB has been edited to replace 'quick splash' with 'nomodeset'. Secondly, once it has booted with the the 'nomodeset' option, it does not allow me to change the resolution higher or lower from 1024 x 786. Is it OK to use the 'nomodeset' for normal use? Will this compromise performance of other devices? The video card is an on-board one, integrated within the Intel GL40 chip-set. The display is a wide-screen LCD, and under Windows could operate under various resolutions. Ideally I would like it to operate on a resolution to fit the wide-screen display as it a bit stretched out at the moment, and less desktop space as I am used to. I believe the optimal resolution is 1366 x 768. Below is some information from the terminal which may be useful. ricstr@Aspire-5332:~$ lspci | grep -i VGA 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09) ricstr@Aspire-5332:~$ xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 1024 x 768, current 1024 x 768, maximum 1024 x 768 default connected 1024x768+0+0 0mm x 0mm 1024x768 0.0*

    Read the article

  • NVIDIA Graphics - resolution problems with new 12.04 LTS installation

    - by Daveisuser56810
    I've been trying to install Ubuntu 12.04 LTS on my desktop most of the day. The desktop uses a NVIDIA GEFORCE 9800 (GT I think) graphics card. I am unable to set the correct resolution (1680 x 1050) for the display. The first problem I had was that of the "Black Screen" during install. I overcame this by utilising the "nomodeset" switch on the install options (once I'd found how to do that). The second problem of course was the "Black screen" following the first reboot. Once again this was overcome by using "nomodeset", this time by "editing" the GRUB. This gave me a resolution of 1280x768 which, the Displays GUI allowed me to change to 1280x720 (appears to fit on screen). I then tried to install the NVIDIA drivers. 1) using additional drivers 2) manually by downloading driver and installing in root As soon as NVIDIA drivers are installed - resolution become restricted to 640x480 (max). At this resolution Ubuntu GUI is not usable as most screens are larger than the display. Removing the NVIDIA driver and removing the XORG.CONF file does not lift this restriction. I have tried most things that I have found and that were vaguely intelligible, but nothing appears to get me closer to a resolution of 1680x1050. UPDATE: reinstalled Ubuntu 12-04 and used the "NoModeSet" in the Grub to restore the resolution to 1280x720, which is at least usable. Will live with this for now.

    Read the article

  • Ubuntu 13.04 boot into black screen, even after installing nvidia drivers, fail at: "Starting Reload cups, upon starting avahi-daemon..."

    - by Elad92
    I got a new machine with i7 4770k and gefore gtx660. I installed windows and then installed Ubuntu 13.04. In the installation everything went well, after the installation I again boot from the USB and choose try ubuntu, and installed boot-repair because windows automatically boot with no option for ubuntu. After I repaired the boot, I restarted and got into grub, when I chose Ubuntu I got message saying I'm running on low graphics mode and when I pressed ok the screen turned off. I couldn't do anything so I restarted and after reading this post: My computer boots to a black screen, what options do I have to fix it? I got into recovery, selected dpkg and repaired packages. Then I rebooted, and tried to press 'e' and change quiet splash to no splash and nomodeset but unfortunately both of them didn't work, and not the screen didn't get turned off, but I just saw a blank screen. So I rebooted again, entered the recovery, and this time I went to the root shell, and tried to install nvidia drivers from this guide here: http://www.howopensource.com/2012/10/install-nvidia-geforce-driver-in-ubuntu-12-10-12-04-using-ppa/ I rebooted and got the same black screen again (the screen didn't go off, just saw a blank screen). In the grub I see that the kernel is 3.8.0-25. I also checked that the usb files are not corrupted using the check CD from the ubuntu installation screen. I'm really frustrated, I don't know what else can I do. (If someone also knows how can I connect to wifi using the root shell it will be very appreciated, because when I choose the 'enable networking' it again booting me to a black screen. Thanks Edit After digging more, I again boot with nomodeset and saw where is it failing, this is the lines I saw: * Starting Reload cups, upon starting avahi-daemon to make sure remote queues are populated [OK] * Starting Reload cups, upon starting avahi-daemon to make sure remote queues are populated [fail] I searched for it in google and this is the closest result I got: http://ubuntuforums.org/showthread.php?t=2144261 i didn't find any way to solve it in the internet, from what I understand this is a problem with 13.04. If someone knows how to fix it I will be very grateful. Thanks Edit 2 - 23.6.13 As Mitch suggested, I disabled the avahi-daemon, and when I boot in nomodeset I get the following error: What else can be the problem?

    Read the article

  • I'm getting a black screen right after Install Ubuntu option on GRUB menu. Any ideas?

    - by Silight
    I've formatted my USB and remade the live USB twice. I tried editing editing the commands (pressing the 'e' key while the command was highlighted on the GRUB menu) by 1. deleting quiet splash and replacing it with nomodeset 2. adding nomodeset right before quiet splash 3. deleting quiet splash and adding radeon.modeset=0 I saw another solution for a fix by editing GRUB but in command line 'sudo' 'nano' and 'update-grub' all show up as unknown commands. I'm brand new to Ubuntu, in case you couldn't tell. I would appreciate any help you could give me. I want to convince my brother that Ubuntu is a better option than iOS but I can't do that if I can't install it. If you need more information, please ask. I'm not dual booting. I want this to be a full install. Thanks.

    Read the article

  • Ubuntu multiple issues (blank screen)

    - by Donavon
    Computer Specs I am having difficulties, to get Ubuntu 11.10 to work. For the 11.10 version, if I click install, or if I click try Ubuntu, I only get a blank screen, that just stays there. If I use "nomodeset", it changes to a loading screen and after about 2 minutes it goes back to black screen - however, before it goes black, i get a few errors, like: bad target number, or passwd error mode (something like that). I've also tried (xforcevesa, i915.modeset=0, nomodeset, radeon.modeset=0, i915.modeset=1) I have also tried the alternate installation, which installed fine, however when I boot up, select it from "grub", it goes black. I did manage to install 10.04, however the screen resolution was 800x600 and I couldn't fix it to 16:9 (my resolution). I don't wanna use 10.04, because I would like the new one 11.10, and would like to use it. Any help would be GREATLY appreciated. Thank you

    Read the article

  • grub2 error : out of disk

    - by Nostradamnit
    Hi everyone, I recently install ArchBang on a machine with Ubuntu and XP. I ran update-grub from Ubuntu and it found the new install and created an entry. However, when I try to boot it, I get: error: out of disk error: you need to load kernel first I've tried several things, including adding a new entry in 40_custom, but nothing changes. Here are the entries I have: default found by update-grub ### BEGIN /etc/grub.d/30_os-prober ### menuentry "ArchBang Linux (on /dev/sda4)" { insmod part_msdos insmod ext2 set root='(hd0,msdos4)' search --no-floppy --fs-uuid --set 75f96b44-3a8f-4727-9959-d669b9244f2a linux /boot/vmlinuz26 root=/dev/sda4 rootfstype=ext4 ro xorg=vesa quiet nomodeset swapon initrd /boot/kernel26.img } menuentry "ArchBang Linux Fallback (on /dev/sda4)" { insmod part_msdos insmod ext2 set root='(hd0,msdos4)' search --no-floppy --fs-uuid --set 75f96b44-3a8f-4727-9959-d669b9244f2a linux /boot/vmlinuz26 root=/dev/sda4 rootfstype=ext4 ro xorg=vesa quiet nomodeset swapon initrd /boot/kernel26-fallback.img } ### END /etc/grub.d/30_os-prober ### custom entry in 40_custom based on various ideas found on the internets menuentry "ArchBang Linux (on /dev/sda4)" { insmod part_msdos insmod ext2 set root='(hd0,msdos4)' search --no-floppy --fs-uuid --set 75f96b44-3a8f-4727-9959-d669b9244f2a linux /boot/vmlinuz26 root=/dev/disk/by-uuid/75f96b44-3a8f-4727-9959-d669b9244f2a rootfstype=ext4 ro xorg=vesa quiet nomodeset swapon initrd /boot/kernel26.img } I think the problem has something to do with the sda4 not being mounted at boot-time... Thanks in advance for you help, Sam

    Read the article

1 2 3 4 5 6 7  | Next Page >