Search Results

Search found 9 results on 1 pages for 'osij2is'.

Page 1/1 | 1 

• VMWare ESXi 4.1- 5.1 installation hang

  - by osij2is

  I'm well aware that I'm trying to install VMWare ESXi 5.1 on hardware that's not on the HCL. I can't find my motherboard on the ultimatewhitebox site as well. I acknowledge these issues in advance. What I'm trying to find is someway to access the logs during installation or see a console or log file to see where the installation is hanging at and remove a device or change a setting in the BIOS. The installation is hanging, not getting a purple screen of death. I thought by hitting ALT+F10 or F12 (or some key combination as such) would enable me to see the console but no such luck. I haven't been able to find much within the ESXi online documentation either. Here's the parts I'm using: AMD Phenom II x3 700 MSI 890FXA-GD70 (IOMMU capable) 16GB DDR3 1333 RAM (2x8GB DIMMs) Intel Pro 1000 (Dual-GbE) PCIe x4 (removed during installation) LSI 9211-8i PCIe (removed during installation) LSI 9201-16i PCIe (removed during installation) Matrox video card BIOS settings: IOMMU is enabled (during 5.1 IOMMU successfully loads) AHCI is enabled (hangs for 4.1) Both onboard Realtek NICs are disabled For ESXi 5.1, the installation hangs after vmkapi_v2_0_0_0 is loaded. For ESXi 5.0, it hangs when loading the vmklinux_9 module. For ESXi 4.1 U3, the installation hangs during loading of ahci module. Again, I'm looking for some way to view a console (service console?) or log file during or after an installation attempt to see what verbose error messages or logging can lead me to solving this problem.

  Read the article

• Reverse Proxies and AJAX

  - by osij2is

  A client of ours is using IBM/Tivoli WebSEAL, a reverse-proxy server for some of their internal users. Our web application (ASP.NET 2.0) and is a fairly straightforward web/database application. Currently, our client users that are going through the WebSEAL proxy are having problems with a .NET 3rd party control. Users who are not going through the proxy have no issues. The 3rd party control is nothing more than an AJAX dynamic tree that on each click requests all the nodes for each leaf. Now our clients claim that once users click on a node in the control, the control itself freezes in such a way that they don't see anything populate. Users see "Loading..." message appear but no new activity there afterwards. They have to leave the page and go back to the original page in order to view the new nodes. I've never worked with a reverse proxy before so I have googled quite a bit on the subject even found an article on SF. IBM/Tivoli has mentioned this issue before but this is about all they mention at all. While the IBM doc is very helpful, all of our AJAX is from the 3rd party control. I've tried troubleshooting using Firebug but by not being behind the reverse proxy, I'm unable to truly replicate the problem. My question is: does anyone have experience with reverse proxies and issues with AJAX sites? How can I go about proving what the exact issue is? Currently we're negotiating remote access so assume for the greater part that I will have access to a machine that's using the WebSEAL proxy. P.S. I realize this question might teeter on the StackOverFlow/ServerFault jurisdictional debate, but I'm trying to investigate from the systems perspective. I have no experience with reverse proxies (and I'm unclear on the benefits) and little with forwarding proxies.

  Read the article

• Resizing MacOSX Leopard partition (Boot Camp, VMWare Fusion 2.0 and Windows XP Pro)

  - by osij2is

  Running an Intel Mac Mini with 1.5GB RAM and an 80GB HDD with Mac OSX 10.5 Leopard. With a Windows XP Pro partition (25GB) via Boot Camp and VMWare Fusion 2.0; the Windows partition is nearly out of space. I would like to repartition the Windows partition to at least 50GB. How can/should I repartition this mac? I prefer free solutions but paid solutions are also welcome.

  Read the article

• Create a CDROM Bootdisk to update BIOS

  - by osij2is

  So, I have a Tyan Opteron board with a very old BIOS version. I realize Opteron's aren't exactly common like Athlons, Phenoms, Intel CPUs, etc. but my question revolves around updating the BIOS, however I don't have a floppy drive and there's no option to boot off of a USB key. Tyan has incomplete instructions on their website (link) on how to flash the BIOS via USB. So my second tactic has been to create a Windows 98 boot-able CDROM with the flash utilities on it. It's been years since I've made one but after going to sites like bootdisk.com and such I haven't had any success. Can anyone tell me step-by-step how to make a boot-able Windows 98 CDROM? I can't believe I'm having such a hard time doing this but I've failed on four different attempts and I must be doing something wrong or I'm not accounting for something.

  Read the article

• Are there pitfalls to using incompatible RAM (frequencies) in motherboards?

  - by osij2is

  I'd like to use 2 x 4GB DDR3 1600 dimms in a motherboard capable of only DDR3 1066. The DDR3 1600 is on sale and the cost is identical to 1066 dimms. It'd be nice to have these faster sticks around should i upgrade the motherboard. I assume the RAM can under clock itself or be changed in the BIOS. While obviously it's less than ideal situation, I don't know if there are other unintended consequences in terms of stability, performance and longevity of the board and said RAM. Am I doing any damage to the memory controller or RAM? I've always bought RAM at the max speed specified for the motherboard and I've never gone over so I'm not sure if there any caveats to this at all. Edit: I intend to use the RAM in pairs. I know that mixing RAM speeds is just a bad idea.

  Read the article

• Sharing music on NAS with other zunes and ipods

  - by osij2is

  After being a long time iPod owner, I'm switching to the new Zune with its subscription model. I haven't bought a Zune yet but I'm planning on doing so within the next month or so. I have approximately 40gb worth of music and my girlfriend has her iPod music library around 30gb. I've been trying to figure out how to migrate all our music off of our laptops/desktops and centralize everything on my NAS. In sharing iPod music isn't too bad. Sharing from one machine to all is fairly easy within the iTunes player. As far as storing all the music on a NAS, again, iPods aren't too bad and imagine other systems aren't difficult. But I'm really new to the Zune and I'm beginning to run into some issues. My questions are: Is it possible to store all music from our iPods and Zune subscriptions and share music between the iPod/Zune within the same file share on my NAS? I'm sure it's possible to store music on a share, but I'm not sure how iTunes and the Zune software differs. Is there 3rd party software, maybe something like DoubleTwist that can sync based from NAS to multiple desktop/laptops? I've never used DoubleTwist but it's something that I found that looks close to being what I need. I've never quite done this myself so I'm trying to find a solution that can: a) store music on a network share; b) sync between different devices (zune/ipod) seamlessly.

  Read the article

• Sharing music on NAS with Zune and iPod?

  - by osij2is

  After being a long time iPod owner, I'm switching to the new Zune with its subscription model. I haven't bought a Zune yet but I'm planning on doing so within the next month or so. I have approximately 40GB worth of music and my girlfriend has her iPod music library around 30GB. I've been trying to figure out how to migrate all our music off of our laptops/desktops and centralize everything on my NAS. In sharing iPod music isn't too bad. Sharing from one machine to all is fairly easy within the iTunes player. As far as storing all the music on a NAS, again, iPods aren't too bad and imagine other systems aren't difficult. But I'm really new to the Zune and I'm beginning to run into some issues. My questions are: Is it possible to store all music from our iPods and Zune subscriptions and share music between the iPod/Zune within the same file share on my NAS? I'm sure it's possible to store music on a share, but I'm not sure how iTunes and the Zune software differs. Is there 3rd party software, maybe something like DoubleTwist that can sync based from NAS to multiple desktop/laptops? I've never used DoubleTwist but it's something that I found that looks close to being what I need. I've never quite done this myself so I'm trying to find a solution that can: a) store music on a network share; b) sync between different devices (Zune/iPod) seamlessly.

  Read the article

• CPU operating temperature ranges

  - by osij2is

  I have an AMD Phenom II 960T with 2 cores unlocked for a total of 6 cores. I don't overclock at all. I have a Arctic Cooling ACALP64 Heatsink/Fan installed. I'm currently running ESXi 5.0 so I have to go into the BIOS to read the CPU temperatures, which at idle seem to be in the 71-74C range. To me, this is pretty high, but I cannot find any official temperature ranges that AMD says the CPU can work well within. There seems to be a lot of questions on superuser and numerous forums around CPU temperatures but no one seems to have a clear consensus as to what the manufacturer temperature ranges are for specific CPUs. I've tried searching through AMDs site to no avail. At this point, I'd be willing to shut off the 2 extra cores if it keeps the heat down but until I get some sort of tolerance or range for temperature, I have no idea if the CPU is being damaged or not. Can anyone point to a direct source, article, FAQ from AMD that specifically states their CPUs temperature range? Or are CPU temperature ranges so varying that there's no possible baseline? Am I being too paranoid about this? To me, anything over 65C is a bit much and if I'm in the low-mid 70s range with NO VMs running, what can I expect if I have several VMs running?

  Read the article

• Installing FreeNAS 8.3 problems

  - by osij2is

  I'm trying to install FreeNAS 8.3 on some desktop-level hardware (AMD Phenom + 890FX + 16GB) and I've been unsuccessful. I initially tried using a USB stick and followed the instructions on the FreeNAS site here. Making the USB was simple as the instructions laid out, but as soon as the USB is detected (during the boot process) some text appears and quickly vanishes and my machine reboots infinitely. After trying several different was to make the USB, I tried using a DVD-ROM but again, I had the same issue as the USB stick. This leads me to conclude that either a BIOS setting is incorrect but I have no idea which one. I've changed the BIOS to not "fast" boot per se, and I've correctly configured the boot order per USB stick and the DVD-ROM drive so I know that it's working. Have I missed anything that might be causing this problem? I'm not a FreeBSD/FreeNAS expert by any means.

  Read the article

1