Search Results

Search found 43 results on 2 pages for 'oskar calvo'.

Page 1/2 | 1 2  | Next Page >

• Minecraft flickers sometimes and colors get buggy on an Intel HD Graphics 3000

  - by Oskar

  I really like Ubuntu, but I always had to switch back to Windows just because I couldn't get my Intel HD Graphics 3000 to work. So, 11.10 came out and I'm trying to get things work in this update, so I can finally stay with Ubuntu and use it. Anyways, things seem to be more stable here, but they're still a bit fishy. I'm doing tests with Minecraft. Currently, there's only 1 minor bug. The game flickers from time to time and the colors get buggy or something I read that maybe I should update to kernel 3.1? Maybe 32-bit Ubuntu is better? It was impossible to play Minecraft in 11.04, but 11.10 is so much more stable.

  Read the article

• Can't ping Ubuntu laptop from my LAN

  - by oskar

  My laptop has Ubuntu 10.10 and is connected to my router with full internet access, yet I can't ping it from other computers on my LAN. I tried the following: I can successfully ping those other computers from my Ubuntu laptop, so I didn't accidentally connect to someone else's network. I can successfully ping my Ubuntu laptop from itself, though I don't know if that means anything. I haven't messed with iptables at all, so it currently doesn't have any rules set that would cause it to reject anything. I made a DHCP reservation for my laptop's MAC address in my router to make sure I was always using the correct IP address. Please note that I am using a "command line only" install of Ubuntu, so I can't use any GUI network config tools. The reason I want to ping it is because I am trying to run an NFS server on the laptop, yet despite correctly setting it up I cannot access the NFS volume on another computer because it isn't even visible on the network right now.

  Read the article

• Can't ping Ubuntu laptop from my LAN

  - by oskar

  My laptop has Ubuntu 10.10 and is connected to my router with full internet access, yet I can't ping it from other computers on my LAN. I tried the following: I can successfully ping those other computers from my Ubuntu laptop, so I didn't accidentally connect to someone else's network. I can successfully ping my Ubuntu laptop from itself, though I don't know if that means anything. I haven't messed with iptables at all, so it currently doesn't have any rules set that would cause it to reject anything. I made a DHCP reservation for my laptop's MAC address in my router to make sure I was always using the correct IP address. Please note that I am using a "command line only" install of Ubuntu, so I can't use any GUI network config tools. The reason I want to ping it is because I am trying to run an NFS server on the laptop, yet despite correctly setting it up I cannot access the NFS volume on another computer because it isn't even visible on the network right now.

  Read the article

• Samsung NP305U1A laptop won't resume from suspension

  - by Oskar Pålsson

  I just bought a Samsung NP305U1A laptop and installed Ubuntu Desktop 12.04 LTS on it. Whenever I suspend the computer and try to wake it back up, the monitor only shows a black screen and the only thing I can do is a hard reset. Kernel: 3.2.0-24-generic Graphic: Radeon HD 6320 Anybody know what to do? UPDATE I did some some research and remebered that I installed the "ATI/AMD proprietary FGLRX graphics driver" from the "Additional drivers" software bundled in Ubuntu. I also tried to install the "ATI/AMD proprietary FGLRX graphics driver (post-release updates)" but whenever I do, it gives me an error and I can't continue So I decided to make a clean install of Ubuntu 12.04 again and when i tried the suspension out-of-the-box, it did work. But since I can't install the drivers I need, HD video is choppy like hell. So perhaps the suspension bug was fixed in the post-release updates of the driver, but sadly I cannot install them, and I don't know why.

  Read the article

• I'm trying to make a php Curl call to formstack api, but I get nothing

  - by Oskar Calvo

  This is one of my first curls code, so it can have mistakes I'm trying to be able to make calls to form/:id/submissions https://www.formstack.com/developers/api/resources/submission#form/:id/submission_GET If I load: https://www.formstack.com/api/v2/form/1311091/submission.json?oauth_token=44eedc50d015b95164897f5e408670f0&min_time=2012-09-01%2000:01:01&max_time=2012-10-27%2000:01:01 If works great. If I try this code: <?php $host = 'https://www.formstack.com/api/v2/'; // TODO this should manage dinamics values or build an action in every method. $action = 'form/1311091/submission.json'; $url = $host . $action; // TODO this values will arrive like an array with values $postData['oauth_token']= '44eedc50d015b95164897f5e408670f0'; $postData['min_time'] ='2012-09-01 00:01:01'; $postData['max_time'] ='2012-10-27 00:01:01'; // TODO make a method with this action function getElements($postData) { $elements = array(); foreach ($postData as $name=>$value) { $elements[] = "{$name}=".urlencode($value); } } $curl = curl_init(); curl_setopt($curl, CURLOPT_URL, $url); curl_setopt($curl, CURLOPT_HTTPGET, true); curl_setopt($curl, CURLOPT_POSTFIELDS, $elements); $result = curl_exec($curl) ; curl_close($curl); var_dump($result); ?>

  Read the article

• Windows 7 XP Mode disable time sync

  - by Oskar Duveborn

  So I've tried the trick from Virtual PC 2007, adding the following section to the vmc configuration file: <components> <host_time_sync> <enabled type="boolean">false</enabled> </host_time_sync> </components> Later someone suggested VPC doesn't want the components level so added this instead: <host_time_sync> <enabled type="boolean">false</enabled> <frequency type="integer">15</frequency> <threshold type="integer">10</threshold> </host_time_sync> When I start up XP Mode (Microsoft Virtual PC) it completely ignores any of these two configuration changes and if I change the clock it's instantly reset to the host time again. I've also obviously disabled the Windows Time service but as it's not joined to a domain or set up with a source it shouldn't be involved anyway. I need to test an application over a few midnight passes and thought the XP Mode machine would be perfect, so I didn't have to mess with my workstation clock... is there any way to get the VPC guest to not sync time with the host? This is easy in Hyper-V ;p

  Read the article

• Problems with ipsec betwen Cisco ASA 5505 and Juniper ssg5

  - by Oskar Kjellin

  I am trying to set up an ipsec tunnel between our ASA 5505 and a Juniper ssg5. The tunnel is up and running, but I cannot get any data through it. The local network I am on is 172.16.1.0 and the remote is 192.168.70.0. But I cannot ping anything on their netowork. I receive a "Phase 2 OK" when I set up the ipsec. I think this is the part of the config that is applicable. It seems like the data is not routed through the tunnel, but I am not sure... object network our-network subnet 172.16.1.0 255.255.255.0 object network their-network subnet 192.168.70.0 255.255.255.0 access-list outside_cryptomap extended permit ip object our-network object their-network crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto map outside_map 1 match address outside_cryptomap crypto map outside_map 1 set pfs crypto map outside_map 1 set peer THEIR_IP crypto map outside_map 1 set ikev1 phase1-mode aggressive crypto map outside_map 1 set ikev1 transform-set ESP-3DES-MD5 crypto map outside_map 1 set ikev2 pre-shared-key ***** crypto map outside_map 1 set reverse-route crypto map outside_map interface outside webvpn group-policy GroupPolicy_THEIR_IP internal group-policy GroupPolicy_THEIR_IP attributes vpn-filter value outside_cryptomap ipv6-vpn-filter none vpn-tunnel-protocol ikev1 tunnel-group THEIR_IP type ipsec-l2l tunnel-group THEIR_IP general-attributes default-group-policy GroupPolicy_THEIR_IP tunnel-group THEIR_IP ipsec-attributes ikev1 pre-shared-key ***** ikev2 remote-authentication pre-shared-key ***** ikev2 local-authentication pre-shared-key *****

  Read the article

• How to get Windows 7 logon wallpaper to tile to other monitors?

  - by Oskar Duveborn

  In 2000/XP/Vista it was easy to set a wallpaper for the logon screen, either manually through tools like Logonstudio or simple registry changes by hand on prepared installation images or through custom group policies. In Windows 7 all this works as usual, but the secondary (or any additional) monitor is just black. The mouse pointer is visible on it but no matter what settings I can't get the wallpaper to tile (or stretch or fill or whatever) over onto it. This makes it hard to OEM/company brand the installation for multi-monitor users. More annoying is the fact that it looks officially supported to brand the logon wallpaper in Windows 7 - as it's made extremely easy... apart from this little catch.

  Read the article

• jQuery "Microsoft JScript runtime error: Object expected"

  - by Oskar Kjellin

  I have the below code that does not seem to work at all :( I keep getting: Microsoft JScript runtime error: Object expected The error seems to occur when the timeout is done. So if I raise the timeout with 10 seconds the error holds for another 10 seconds. I want to be able to update the number of friends online async. The number is shown with the following html: <a href="" id="showChat" >Friends online <strong id="friendsOnline">(?)</strong></a> The friends part is set at the first run, but when the timeout calls back it does not fire again. Also, I cannot see on which line the error occurs because if I want to break on the error it just shows "no source code" etc. The code below is the code I'm using. Thanks! <script src="http://ajax.microsoft.com/ajax/jquery/jquery-1.3.2.js" type="text/javascript"></script> <script src='/Scripts/MicrosoftAjax.js' type="text/javascript"></script> <script src='/Scripts/MicrosoftMvcAjax.js' type="text/javascript"></script> <script src='/Scripts/jquery.autocomplete.js' type="text/javascript"></script> <script type="text/javascript"> $(document).ready(function() { UpdateFriendsOnline(); function UpdateFriendsOnline() { window.setTimeout("UpdateFriendsOnline()", 1000); $.get("/Account/GetFriendsOnline", function(data) { $("#friendsOnline").html("(" + data + ")"); }); } }); </script>

  Read the article

• jquery.autocomplete doesn't work in compability mode

  - by Oskar Kjellin

  I've read all the results I can find on SO about this without finding anything that applies to me, so don't judge me too quickly :) I am using jquery.autocomplete downloaded from here: http://www.dyve.net/jquery/?autocomplete together with http://ajax.microsoft.com/ajax/jquery/jquery-1.3.2.js This all works well in IE8 and FF, but as soon as I activate compability mode in IE8 I keep getting: Microsoft JScript runtime error: Object doesn't support this property or method When looking in the call stack, This is the one where it breaks: <script type="text/javascript"> $().ready(function() { $("#friendsearch").autocomplete("/Account/FindFriends"); }); </script> and then the calling function is this: if ( jQuery.readyList ) { // Execute all of them jQuery.each( jQuery.readyList, function(){ this.call( document, jQuery ); }); // Reset the list of functions jQuery.readyList = null; } where this line throws the error: this.call( document, jQuery ); Does anybody know why this happens? As mentioned above, works super in IE8 and firefox, but not in compability mode(IE7)

  Read the article

• QtWebKit problems playing HTML5 video

  - by oskar

  I have a simple Qt application that launches a window with a QWebView. I tried several sites using the video tag with h.264, and it either can't play the video at all (as in youtube or sublime video), or it renders the video poorly, with black lines covering parts of it, like when viewing the video here. Is this a known issue with QtWebKit, or have I neglected to do something that would make it work better? My code is below. #include <QtGui/QApplication> #include <QWebView> int main(int argc, char *argv[]) { QApplication a(argc, argv); QWebView *view = new QWebView(); view->load(QUrl("http://webkit.org/blog/140/html5-media-support/")); view->show(); return a.exec(); }

  Read the article

• C# regex. Optional match after string

  - by Oskar Kjellin

  I have an input like this test1.test2.part01 which I want to strip away to test1.test2. The only thing i know is that it will end with partxx and probably a dot before the partxx. However, it will not always be a apart. Another example of input might be testas1.tlp2.asd3.part10 which ofcourse should be stripped to testas1.tlp2.asd3. I've made all that, no problem. The problem is the dot at the end before partxx. My regex at the moment is: (.*).?part\d{1,2} But it will include the dot in the group. I do not want the dot to be in the group. The below works as I want it, given that the dot exists, but it will not always be there. (.*).part\d{1,2} How can I exclude the optional dot from the group?

  Read the article

• WPF Memory Leak

  - by Oskar Kjellin

  I have an WPF form that I myself did not create, so I am not very good at WPF. It is leaking badly though, up to 400 MB and closing the form does not help. The problem lies in my application loading all the pictures at once. I would like to only load the ones visible at the moment. It is about 300 pictures and they are a bit large so my WPF-form suffers from loading them all. I have a DataTemplate with my own type that has a property Thumbnail. The code in the template is like this: <Image Source="{Binding Path=Thumbnail}" Stretch="Fill"/> And then I have a grid with a control that has the above template as source. The code for this control is the below. Please provide me with hints on how to optimize the code and perhaps get the only ones that are visible and only have that many controls loaded at the same time? <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="Controls:ElementFlow"> <Grid Background="{TemplateBinding Background}"> <Canvas x:Name="PART_HiddenPanel" IsItemsHost="True" Visibility="Hidden" /> <Viewport3D x:Name="PART_Viewport"> <!-- Camera --> <Viewport3D.Camera> <PerspectiveCamera FieldOfView="60" Position="0,1,4" LookDirection="0,-1,-4" UpDirection="0,1,0" /> </Viewport3D.Camera> <ContainerUIElement3D x:Name="PART_ModelContainer" /> <ModelVisual3D> <ModelVisual3D.Content> <AmbientLight Color="White" /> </ModelVisual3D.Content> </ModelVisual3D> <Viewport2DVisual3D RenderOptions.CachingHint="Cache" RenderOptions.CacheInvalidationThresholdMaximum="2" RenderOptions.CacheInvalidationThresholdMinimum="0.5"/> </Viewport3D> </Grid> </ControlTemplate> </Setter.Value> </Setter> </Style>

  Read the article

• C# winforms Picturebox, backgroundimage zoomed at the top?

  - by Oskar Kjellin

  I have a picturebox where I set change the BackgroundImage frequently. I have a the BackgroundImageLayout set to Zoom. The problem is that when an image does not have the same scale as the picturebox, the picture is drawn in the middle. That is, the top and the bottom padding of the picturebox is always the same. I would like for the BackgroundImage to always be aligned at the top. What is the easiest and most performance efficient way of doing this? I can add that I download the images from the internet. If you think that the best way to deal with this is to resize them at that point I can do that :)

  Read the article

• C# Solution - How many projects?

  - by Oskar Kjellin

  Hey, I googled this a little but couldn't find a good result. Right now I'm building a web site and I'm trying to make it as correct as possible from a design point of view from the beginning. The problem I'm now facing is that when deciding to start with logging I needed a project to place this code in. As I could not find a suitable place in my currect projects I thought: hey, why not a logging class library? Is there a general guideline on how many projects you should have? I know this would be a rather small project but it would be nice to entirely get it out of my way! Any hints are appreciated :)

  Read the article

• Linq-To-Objects group by

  - by Oskar Kjellin

  Hey, I'm building a software for timereporting I have a Dictionary<string, Dictionary<string, double>>. The key in the main dictionary is a users name and their value is a dictionary of . I have a function GetDepartment(string UserName) which returns a string with the users department. What I want is to crate a new dictionary, of the same type, that has the department as the main key and in the subdictionary a where hours is the total for that department. I have been trying to do this with linq but did not succeed. Would be very glad for some help here! EDIT: This code does exactly what I want. But I want it in LINQ Dictionary<string, Dictionary<string, double>> temphours = new Dictionary<string, Dictionary<string, double>>(); ; foreach (var user in hours) { string department = GetDepartment(user.Key); if (!temphours.ContainsKey(department)) { temphours.Add(department, new Dictionary<string, double>()); } foreach (var customerReport in user.Value) { if (!temphours[department].ContainsKey(customerReport.Key)) { temphours[department].Add(customerReport.Key, 0); } temphours[department][customerReport.Key] += customerReport.Value; } }

  Read the article

• C# Drag drop does not work on windows 7

  - by Oskar Kjellin

  I have had a project for quite a while using C# winforms. I implemented a drag-drop function before windows 7 was release. Worked like a charm. However, when using windows 7 it does not work. The event doesn't even get triggered. AllowDrop is set to true. When subscribing to DragEnter it does not get called in windows 7 (not sure about vista). But on XP it works all the way. The program is run with administritave priviliges. Is there any difference in the drag drop in windows 7 vs xp? Don't know if it's relevant, but I'm using x64

  Read the article

• Linq-To-Entities group by

  - by Oskar Kjellin

  Hey, I'm building a software for timereporting I have a Dictionary<string, Dictionary<string, double>>. The key in the main dictionary is a users name and their value is a dictionary of . I have a function GetDepartment(string UserName) which returns a string with the users department. What I want is to crate a new dictionary, of the same type, that has the department as the main key and in the subdictionary a where hours is the total for that department. I have been trying to do this with linq but did not succeed. Would be very glad for some help here! EDIT: This code does exactly what I want. But I want it in LINQ Dictionary<string, Dictionary<string, double>> temphours = new Dictionary<string, Dictionary<string, double>>(); ; foreach (var user in hours) { string department = GetDepartment(user.Key); if (!temphours.ContainsKey(department)) { temphours.Add(department, new Dictionary<string, double>()); } foreach (var customerReport in user.Value) { if (!temphours[department].ContainsKey(customerReport.Key)) { temphours[department].Add(customerReport.Key, 0); } temphours[department][customerReport.Key] += customerReport.Value; } }

  Read the article

• Cannot add table to context - LINQ-To-SQL

  - by Oskar Kjellin

  Hey, I'd be happy to give you more info if you need, just ask for it. I have in my database a table of articles, a table of tags and a link table. The article table has values like Id, Subject etc etc, the tags only have Id and Tag. The link has TagId and ArticleId. The problem is that when I drag drop the link-table nothing happens! This all worked before I decided to rename my column in the tables from "ID" to "Id" to correct spelling. Thanks in advance!

  Read the article

• SqlException: User does not have permission to perform this action.

  - by Oskar Kjellin

  I have been using my website (ASP.NET MVC) in visual studio but now I want to host it on my server. I published from visual studio onto the network share to be used. The server is running Windows Home Server, IIS 6 and SQL Server 2008 R2 (express). In Microsoft SQL Server Management Studio, I've attached the database and made sure that the user IUSR_SERVER is owner of the db. I also made sure that the user Network Service has access. The Web Site is configured in IIS to run anonymously as IUSR_SERVER. I have granted write and read access to IUSR_SERVER as well as Network Service and made sure that nothing is read only. The web.config has this connectionstring: <connectionStrings> <remove name="ApplicationServices" /> <add name="ApplicationServices" connectionString="Data Source=.\SQLExpress;Integrated Security=True;Initial Catalog=MyDatebase" providerName="System.Data.SqlClient" /> </connectionStrings> However, I cannot browse my web site. I only get this error: Server Error in '/' Application. User does not have permission to perform this action. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: User does not have permission to perform this action. Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [SqlException (0x80131904): User does not have permission to perform this action.] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +4846887 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +194 Feels like I've tried everything. Would be very grateful for your aid in this.

  Read the article

• How do I get date form week, working also with 53-week years? c#

  - by Oskar Kjellin

  Hey, I have made a function to cound the weeks in a year, and that works fine. The problem is that I need a method to get the mondaydate of the week. This is a swedish calendar. The code below works well for years that have 52 weeks, but some years(like 2009) has 53 weeks. Then I got a date from januari as the mondaydate(cant be right). So please help me to get it to work for all years. What I probably could do is check if the year has 53 weeks and then do some checks but I'd like it to go smooth without special checks. Here's what I've come up with: public static DateTime GetDateFromWeek(int year, int week) { //First day of the year DateTime d = new DateTime(year, 1, 1); GregorianCalendar calendar = new GregorianCalendar(GregorianCalendarTypes.MiddleEastFrench); d = calendar.AddWeeks(d, week); d = d.AddDays(1 - (double)d.DayOfWeek); return d; }

  Read the article

• Compressing assets post-update with Subversion

  - by Oskar Krawczyk

  I'm trying to find a way to compress specific assets post-update on a Production server. So far, I can't find any way to do this that's even remotely simple. Anyone has any insights/experience in doing this? Basically, what I need to do is run a Java utility to compress CSS and JS files - the problem with JS files is that they may or might not validate (JS errors), if it doesn't validate the Java utility will throw output a message. This makes the whole idea a bit more complicated.

  Read the article

• Run ajax scripts on page when navigating with ajax?

  - by Oskar Kjellin

  I got a bit of an issue in my ASP.NET MVC project. I have a chat div in the bottom right corner (like facebook), and of course I do not want this to reload when navigating to all my navigation is ajax. The problem I am facing is that I use the following code on the top of the view page: <script type="text/javascript"> $(document).ready(function() { $('#divTS').hide(); $('a#showTS').click(function() { $('#divTS').slideToggle(400); return false; }); }); </script> The problem is that this code is only loaded with ajax and does not seem to fire? I would like to run all scripts in the newly loaded view, just as if I hadn't navigated with ajax. I cannot put this in the site.master as it only loads once and then probably the divs I am trying to hide doesn't exist. Is there a good way to run scripts in the ajax-loaded div?

  Read the article

• "Invalid signature file" when attempting to run a .jar

  - by oskar

  My java program is packaged in a jar file and makes use of an external jar library, bouncy castle. My code compiles fine, but running the jar leads to the following error: Exception in thread "main" java.lang.SecurityException: Invalid signature file digest for Manifest main attributes I've googled for over an hour searching for an explanation and found very little of value. If anyone has seen this error before and could offer some help, I would be obliged.

  Read the article

• [C#] SQLite - Creating and changing databases on the fly

  - by Oskar Kjellin

  Today I use SQLite and send a database-file with the project. However I want the database to be created when the user first starts the software. Is there a way to copy the code needed to create a database based on the existing database? The problem is that when a user downloads a new version he might be tricked into copying over his last database and lose the data. I'd like a nice way to check the version of the database and modify it if I need new columns or tables etc. Or, if it does not exist at all, create a new database? I know I can probably make create the code to make the database from the beginning but I want it to be based on the existing database I have created by a gui.

  Read the article

1 2  | Next Page >