Search Results

Search found 90714 results on 3629 pages for 'osx server'.

Page 1/3629 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • More than 100,000 articles !

    - by developerit
    In one month, we already got more than 100,000, and we continue to crawl! We plan on hitting 250,000 total articles next month. Due to the large amount of data we are gathering, we are planning on updating our SQL stored procedure to improve performance. We may be migrating to SQL Server 2008 Entreprise, as we are currently running on SQL Server 2005 Express Edition… We are at 400 Mb of data, getting more and more close to the 2 Gb limit. Stay tune for more info and browse daily fresh articles about web development.

    Read the article

  • Bring the windows of two different apps in mac os to the front?

    - by Nicolas Kokkalis
    How do I easily bring to the front of the screen the top windows of two different application in Mac OS X? I prefer to use the keyboard only. Example Scenario: Say there are 10 Firefox and 10 TextEdit windows open. Also, say that these windows are having various different sizes so that the windows of each application fully cover the desktop. Goal: I want to bring to the front of my screen the top window of Firefox along with the top window of TextEdit, so that I can visually compare some data. Restrictions: I cannot use expose (since having 20 windows on the screen already renders expose useless) And I do not want to use multiple desktop (too complex and time consuming) I prefer to use a keyboard shortcut. Unfortunately cmd+tab brings all windows of each application to the top, covering all windows of the other applications.

    Read the article

  • New Cumulative Updates for SQL Server 2005 & SQL Server 2008 R2

    - by AaronBertrand
    Early this morning, the SQL Server Release Services team pushed out three new cumulative updates for SQL Server. KB #2489375 - SQL Server 2005 SP3 CU #14 (9.00.4317) KB #2489409 - SQL Server 2005 SP4 CU #2 (9.00.5259) KB #2489376 - SQL Server 2008 R2 CU #6 (10.50.1765) There are a lot more fixes in the 2008 R2 update - 43, by my count. In comparison, only 9 fixes for 2005 SP4, and only 2 fixes for 2005 SP3. You can draw your own conclusions from that data, particularly if you are still on SQL Server...(read more)

    Read the article

  • SQL Authority News – Download Microsoft SQL Server 2014 Feature Pack and Microsoft SQL Server Developer’s Edition

    - by Pinal Dave
    Yesterday I attended the SQL Server Community Launch in Bangalore and presented on Performing an effective Presentation. It was a fun presentation and people very well received it. No matter on what subject, I present, I always end up talking about SQL. Here are two of the questions I had received during the event. Q1) I want to install SQL Server on my development server, where can we get it for free or at an economical price (I do not have MSDN)? A1) If you are not going to use your server in a production environment, you can just get SQL Server Developer’s Edition and you can read more about it over here. Here is another favorite question which I keep on receiving it during the event. Q2) I already have SQL Server installed on my machine, what are different feature pack should I install and where can I get them from. A2) Just download and install Microsoft SQL Server 2014 Service Pack. Here is the link for downloading it. The Microsoft SQL Server 2014 Feature Pack is a collection of stand-alone packages which provide additional value for Microsoft SQL Server. It includes tool and components for Microsoft SQL Server 2014 and add-on providers for Microsoft SQL Server 2014. Here is the list of component this product contains: Microsoft SQL Server Backup to Windows Azure Tool Microsoft SQL Server Cloud Adapter Microsoft Kerberos Configuration Manager for Microsoft SQL Server Microsoft SQL Server 2014 Semantic Language Statistics Microsoft SQL Server Data-Tier Application Framework Microsoft SQL Server 2014 Transact-SQL Language Service Microsoft Windows PowerShell Extensions for Microsoft SQL Server 2014 Microsoft SQL Server 2014 Shared Management Objects Microsoft Command Line Utilities 11 for Microsoft SQL Server Microsoft ODBC Driver 11 for Microsoft SQL Server – Windows Microsoft JDBC Driver 4.0 for Microsoft SQL Server Microsoft Drivers 3.0 for PHP for Microsoft SQL Server Microsoft SQL Server 2014 Transact-SQL ScriptDom Microsoft SQL Server 2014 Transact-SQL Compiler Service Microsoft System CLR Types for Microsoft SQL Server 2014 Microsoft SQL Server 2014 Remote Blob Store SQL RBS codeplex samples page SQL Server Remote Blob Store blogs Microsoft SQL Server Service Broker External Activator for Microsoft SQL Server 2014 Microsoft OData Source for Microsoft SQL Server 2014 Microsoft Balanced Data Distributor for Microsoft SQL Server 2014 Microsoft Change Data Capture Designer and Service for Oracle by Attunity for Microsoft SQL Server 2014 Microsoft SQL Server 2014 Master Data Service Add-in for Microsoft Excel Microsoft SQL Server StreamInsight Microsoft Connector for SAP BW for Microsoft SQL Server 2014 Microsoft SQL Server Migration Assistant Microsoft SQL Server 2014 Upgrade Advisor Microsoft OLEDB Provider for DB2 v5.0 for Microsoft SQL Server 2014 Microsoft SQL Server 2014 PowerPivot for Microsoft SharePoint 2013 Microsoft SQL Server 2014 ADOMD.NET Microsoft Analysis Services OLE DB Provider for Microsoft SQL Server 2014 Microsoft SQL Server 2014 Analysis Management Objects Microsoft SQL Server Report Builder for Microsoft SQL Server 2014 Microsoft SQL Server 2014 Reporting Services Add-in for Microsoft SharePoint Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Download, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL

    Read the article

  • MS12-070 : Security Updates for all supported versions of SQL Server

    - by AaronBertrand
    This week there was a security release for all supported versions of SQL Server . Each version has 32-bit and 64-bit patches, and each version has GDR (General Distribution Release) and QFE (Quick-Fix Engineering) patches. GDR should be applied if you are at the base (RTM or SP) build for your version, while QFE should be applied if you have installed any cumulative updates after the RTM or SP build. ( More details here .) SQL Server 2005 RTM, SP1, SP2, SP3 - not supported SP4 - GDR = 9.00.5069,...(read more)

    Read the article

  • SQL SERVER – Resolving SQL Server Connection Errors – SQL in Sixty Seconds #030 – Video

    - by pinaldave
    One of the most famous errors related to SQL Server is about connecting to SQL Server itself. Here is how it goes, most of the time developers have worked with SQL Server and knows pretty much every error which they face during development language. However, hardly they install fresh SQL Server. As the installation of the SQL Server is a rare occasion unless you are DBA who is responsible for such an instance – the error faced during installations are pretty rare as well. I have earlier written an article about this which describes how to resolve the errors which are related to SQL Server connection. Even though the step by step directions are pretty simple there are many first time IT Professional who are not able to figure out how to resolve this error. I have quickly built a video which is covering most of the solutions related to resolving the connection error. In the Fix SQL Server Connection Error article following workarounds are described: SQL Server Services TCP/IP Settings Firewall Settings Enable Remote Connection Browser Services Firewall exception of sqlbrowser.exe Recreating Alias Related Tips in SQL in Sixty Seconds: SQL SERVER – FIX : ERROR : (provider: Named Pipes Provider, error: 40 – Could not open a connection to SQL Server) (Microsoft SQL Server, Error: ) SQL SERVER – Could not connect to TCP error code 10061: No connection could be made because the target machine actively refused it SQL SERVER – Connecting to Server Using Windows Authentication by SQLCMD SQL SERVER – Fix : Error: 15372 Failed to generate a ser instance od SQL Server due to a failure in starting the process for the user instance. The connection will be closed SQL SERVER – Dedicated Access Control for SQL Server Express Edition – An error occurred while obtaining the dedicated administrator connection (DAC) port. SQL SERVER – Fix : Error: 4064 – Cannot open user default database. Login failed. Login failed for user What would you like to see in the next SQL in Sixty Seconds video? Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Database, Pinal Dave, PostADay, SQL, SQL Authority, SQL in Sixty Seconds, SQL Query, SQL Scripts, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL, Technology, Video Tagged: Excel

    Read the article

  • SQL SERVER – Color Coding SQL Server Management Studio Status Bar – SQL in Sixty Seconds #023 – Video

    - by pinaldave
    I often see developers executing the unplanned code on production server when they actually want to execute on the development server. Developers and DBAs get confused because when they use SQL Server Management Studio (SSMS) they forget to pay attention to the server they are connecting. It is very easy to fix this problem. You can select different color for a different server. Once you have different color for different server in the status bar, it will be easier for developer easily notice the server against which they are about to execute the script. Personally when I work on SQL Server development, here is the color code, which I follow. I keep Green for my development server, blue for my staging server and red for my production server. Honestly color coding does not signify much but different color for different server is the key here. More Tips on SSMS in SQL in Sixty Seconds: Generate Script for Schema and Data in SQL Server – SQL in Sixty Seconds #021  Remove Debug Button in SQL Server Management Studio – SQL in Sixty Seconds #020  Three Tricks to Comment T-SQL in SQL Server Management Studio – SQL in Sixty Seconds #019  Importing CSV into SQL Server – SQL in Sixty Seconds #018   Tricks to Replace SELECT * with Column Names – SQL in Sixty Seconds #017 I encourage you to submit your ideas for SQL in Sixty Seconds. We will try to accommodate as many as we can. If we like your idea we promise to share with you educational material. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Database, Pinal Dave, PostADay, SQL, SQL Authority, SQL in Sixty Seconds, SQL Query, SQL Scripts, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL, Technology, Video

    Read the article

  • Enable FTP on OS X 10.8 Mountain Lion Server

    - by Oleg Trakhman
    There is a LAN comprising several mac machines (iMac, Mac Pro, macbook etc.), Airport Express router and Mac Mini Server running OS X Server 10.8 (Mountain Lion Server). I need to share a folder on Mac Mini Server by FTP. What did I try so far: Made special partition for FTP Access, call it "Reports" So shared folder would be "/Volumes/Reports" Gave access every user and group in system, and also enabled guest access. I checked posix acl, which is "rwxrwxrwx", I checked sharing settings in "Preferences.app" and "Server.app" Checked that users have access to FTP service Enabled FTP in Server.app I tried access to shared folder (by FTP): via Cyberduck via Finder via shell: ftp server.local And what I got: $ ftp [email protected] Trying 10.0.2.2... Connected to server.local. 220 10.0.2.2 FTP server (tnftpd 20100324+GSSAPI) ready. 331 User ftpuser accepted, provide password. Password: 530 User ftpuser may not use FTP. and $ ftp [email protected] Trying 10.0.2.2... Connected to server.local. 220 10.0.2.2 FTP server (tnftpd 20100324+GSSAPI) ready. 331 User admin accepted, provide password. Password: 530 User admin denied by SACL. ftp: Login failed ftp> (admin is administrator account , ftpuser is special user account made to access ftp) What I'm doing wrong? Getting really tired of this...

    Read the article

  • How to remap "Dashboard" key to show the Desktop on OSX [Snow] Leopard?

    - by Mike
    I use my Desktop far more often than I use my Dashboard. However, my MacBook Pro comes with a dedicated key for Dashboard but it doesn't come with one for Desktop. Using this article, I was able to remap my Dashboard key to show the desktop by changing the values for keys 62 and 63 ("Dashboard") to the same values used by keys 36 and 37 ("Show Desktop"). Specifically, I changed the value for both array index #1s to 111. This worked great for my external (kinesis freestyle) keyboard. But when I went back to my internal macbook keyboard, I discovered that the Dashboard key still mapped to the Dashboard rather than the Desktop. How can I complete this mapping for all of my keyboards? The Kinesis Freestyle, my internal MacBook Pro keyboard, and my external Apple Aluminum Bluetooth keyboard? Update: I'm definitely not looking for a solution that involves using the Function keys instead of the special keys. I wish to keep using my Function keys as function keys as they're indispensable for other applications.

    Read the article

  • Windows Server 2003 Terminal Server does not give out all available licenses

    - by Erwin Blonk
    I installed the Terminal Server role in Windows Server 2003 Standard 64-bits. Still, only 2 connections are allowed. The License Manager says that there are 10 Device CALs available, which is correct, and that none are given out. For good measure I let the server reboot, to no effect. Before this, there was another server (same Windows, except that it is 32 bits) active as a licensing server. I removed the role first and then then added it to the new server. I then removed the Terminal Server Licensing Server component off the old one and added it to the new one. After that, I added to licenses. When that didn't give the required result, I rebooted to new server. Still, the new server, with licenses and all, acts as if it has the 2 license RDP. The server are all stand-alone, there is no active directory been set up. Both servers are in different workgroups. Update (4/12/10): The server has changed the entries in the Terminal Server Licensing a few times. After installing the licenses it added an entry of which the exact phrasing I forgot but it was about temporary Windows 2003 device licenses. Later it added Windows Server 2003 - TS Per Device CAL. The temporary held 2 licenses (standard RDP licenses, I think) and the other 10. At some point, seemingly unrelated from the testing we did, it used a licenses from the new pool. This morning, 2 licenses were used from the pool of 10 and only 1 from the temporary/RDP pool (I wish I had screenshots to show, it changed every few hours oir so it seems). Although I had already activated the server over the internet, and re-activated it, I decided to go through the whole procedure by phone. Long story short, here is what it says now: Existing Windows 2000 Server, type:built-in [no licenses used, I add for for sake of being complete] Windows Server 2003 - Terminal Server Per Device CAL Token, type:open [none of 10 used] Windows Server 2003 - TS Per Device CAL, type:open [3 of 10 used] As I tried to explain, this is the end result after a few changes, most of which I can't directly connect to any action from my part. Only going to the activation procedure by phone seemed to directly effect the TS, resulting in the above configuration. Still, it is impossible to connect with more than 3 people, which is 1 up from the 2 that could connect yesterday. TS does say 7 licenses are avaible. Yet it won't give them out.

    Read the article

  • 256 Colors in Terminal over SSH on OSX 10.6

    - by user1104160
    I am using either Windows 7 or Ubuntu 12.04 and trying to SSH into OSX 10.6. Using Vim color schemes, I can emulate the colors on xterm-256 color on Linux and gVim on Windows. However, I would like the colors to follow through when I am SSHing onto the OSX. The default terminal, however, does not support xterm-256color. Is there a way to have OSX use iterm2 by default, to accept all SSH requests instead of terminal.app? If not, is there a way to install xterm-256color into the default terminal? Upgrading to Lion is out of the question at this point. Thank you!

    Read the article

  • Windows Server 2003 Terminal Server with installed licenses will not go beyond 2 connections

    - by Erwin Blonk
    I installed the Terminal Server role in Windows Server 2003 Standard 64-bits. Still, only 2 connections are allowed. The License Manager says that there are 10 Device CALs available, which is correct, and that none are given out. For good measure I let the server reboot, to no effect. Before this, there was another server (same Windows, except that it is 32 bits) active as a licensing server. I removed the role first and then then added it to the new server. I then removed the Terminal Server Licensing Server component off the old one and added it to the new one. After that, I added to licenses. When that didn't give the required result, I rebooted to new server. Still, the new server, with licenses and all, acts as if it has the 2 license RDP. The server are all stand-alone, there is no active directory been set up. Both servers are in different workgroups.

    Read the article

  • Migrate database from SQL Server Standard to SQL Server Express for DotNetNuke

    - by Bjørn
    Hello, we have an old server that we want to dedicate fully as a public webserver (hosting a few DotNetNuke sites), and for this purpose we would like to install SQL Server Express (probably 2008) on the server and thus have both the Database server and the Web Server on the machine. But: The databases for the webserver are hosted on a SQL Server 2005 Standard today. So the question is: Is it possible to move a database from a Standard Server to an Express Server?

    Read the article

  • Windows Server 2003 Terminal Server does not give out all available licenses (solved)

    - by Erwin Blonk
    I installed the Terminal Server role in Windows Server 2003 Standard 64-bits. Still, only 2 connections are allowed. The License Manager says that there are 10 Device CALs available, which is correct, and that none are given out. For good measure I let the server reboot, to no effect. Before this, there was another server (same Windows, except that it is 32 bits) active as a licensing server. I removed the role first and then then added it to the new server. I then removed the Terminal Server Licensing Server component off the old one and added it to the new one. After that, I added to licenses. When that didn't give the required result, I rebooted to new server. Still, the new server, with licenses and all, acts as if it has the 2 license RDP. The server are all stand-alone, there is no active directory been set up. Both servers are in different workgroups. Update (4/12/10): The server has changed the entries in the Terminal Server Licensing a few times. After installing the licenses it added an entry of which the exact phrasing I forgot but it was about temporary Windows 2003 device licenses. Later it added Windows Server 2003 - TS Per Device CAL. The temporary held 2 licenses (standard RDP licenses, I think) and the other 10. At some point, seemingly unrelated from the testing we did, it used a licenses from the new pool. This morning, 2 licenses were used from the pool of 10 and only 1 from the temporary/RDP pool (I wish I had screenshots to show, it changed every few hours oir so it seems). Although I had already activated the server over the internet, and re-activated it, I decided to go through the whole procedure by phone. Update 2 (4/12/10) The problem has been solved. It seems the activation over the web, while it said to have succeeded, did not work correctly. After activating by phone, it did work. What was different from the old setup and what put me on the wrong foot from that moment, was that I now need to create seperate user account because a session with one user account will be taken over by someone else when that account is used by that person. On the previous server, it was possible to open several sesions with the same account. We now use Per Device licenses, I'm not sure what was used before. Thanks all for the replies.

    Read the article

  • Can you run Snow Leopard Server on a VM?

    - by Crash893
    I'm thinking of buying a mac mini server for my email needs (small office server for 999 with all the features i want build in) I wanted to give it a test drive before i commit so i was thinking "hey this sounds like the perfect job for a vm" however i havent been able to see any examples of running snow lepoard server on a vm does anyone know if its possible and/or there is a premade vm package to test it out with?

    Read the article

  • SQL Server Agent was not running on Server Dynamics CRM 2013

    - by No1_Melman
    I'm trying to install Dynamics CRM 2013 on a server. This server is on a VM. There are several other VMs, an ADDS & DNS, a MSSQL and a WebServer VM. Each server is a Windows Server 2012 R2. The SQL Server is 2012 Enterprise. Each VM is part of the main Domain, set by the ADDS & DNS. NSLookup confirms I can see the computer at the right IP address. Each separate VM has its own static IP, the DNS is set to the ADDS & DNS. I use the domain administrator to log into all the servers, and make the that domain administrator a local administrator. I've set up all the domain users for the CRM and gave them appropriate permissions, I have also added the accounts to the appropriate places, such that the CRM Deployment user is in the SQL security. The SQL Agent is running. SQL server configuration manager has SQL server network configuration TCP/IP enabled to allow remote connections. The SQL server has the domain user as a administrator, which is the same user being used to install the CRM. In the CRM setup i point to the [Servername]\[Instance] and I have also tried just the [Servername]. to make this easier I called the server MSSQL and left the instance name to the default. I even install the MSSQL instance as the domain administrator. CRM can find the ReportServer url. I have enable all the ports required, including: 135, 1433, 1434, 2382, 2383, 4022. 1434 UDP. I feel like I have absolutely done everything, I have google many times and tried all the different methods, and for the life of me I cant seem to get the CRM setup to find the SQL server agent. It passes everything else perfectly fine. I can even ping the MSSQL server. What is the problem, why does the CRM still keep giving the error: SQLSERVERAGENT (SQLSERVERAGENT) service is not running on the server MSSQL On the MSSQL server, the name of the sql server agent service is: SQL Server Agent (MSSQLSERVER)

    Read the article

  • Linked server problem on SQL Server 2005

    - by BradyKelly
    I have a weird issue and I hope someone can steer me in the right direction for resolving this please. When I execute the following query against a linked server, I get the following error. I can connect to the server in SSMS as a separate server, and execute a similar query against its Deposits table. The nn.nn is my own replacement to avoid broadcasting our server addresses. The query: select td.Batch , td.DateTimeDeposited from Deposits cd left join [172.nn.nn.32\sqlexpress].Terminal.dbo.Deposits td on cd.DateTimeDeposited = td.DateTimeDeposited The error: OLE DB provider "SQLNCLI" for linked server "172.nn.nn.11\sqlexpress" returned message "Login timeout expired". OLE DB provider "SQLNCLI" for linked server "172.nn.nn.11\sqlexpress" returned message "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.". Msg 65535, Level 16, State 1, Line 0 SQL Network Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF]. Notice how the error is about server 172.nn.nn.11 and not 172.nn.nn.32. SOLVED (STUPID ME): Somebody had added an extra bit to my query that was scrolled off-screen and was querying the 17.nn.nn.11 server.

    Read the article

  • Can't access SQL Server 2008 from workstations, but can from server

    - by Kev
    We have an app that can use mssql2k or 2k8. We've been using 2k but I decided to try 2k8 to compare. I installed in on our win2k3 server alongside mssql2k. In the ODBC applet on the server, I was able to set up access to 2k8, and it passes the test at the end successfully, whether I tell it to use Windows Authentication or an sql login. The latter is how the app always accessed mssql2k. The app works fine from the server, but when I try it on a workstation (winxpsp3), I get a window titled, "Microsoft SQL Server Login" that says: Connection failed: SQLState: '01000' SQL Server Error: 53 [Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()). Connection failed: SQLState: '08001' SQL Server ERror: 17 [Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied. Then I get the ODBC login dialog, which I can't get to login correctly (I just keep getting the same error above), even copying and pasting a password after resetting it on the server, and whether "trusted" is checked or not. "Options" is disabled. The server was straight SERVERNAME for mssql2k, but for mssql2k8 it's called SERVERNAME\mssql2008. That works on the server, why not on the workstation? (Which I'm logged in as the same person on, BTW.)

    Read the article

  • SQL SERVER – Concat Strings in SQL Server using T-SQL – SQL in Sixty Seconds #035 – Video

    - by pinaldave
    Concatenating  string is one of the most common tasks in SQL Server and every developer has to come across it. We have to concat the string when we have to see the display full name of the person by first name and last name. In this video we will see various methods to concatenate the strings. SQL Server 2012 has introduced new function CONCAT which concatenates the strings much efficiently. When we concat values with ‘+’ in SQL Server we have to make sure that values are in string format. However, when we attempt to concat integer we have to convert the integers to a string or else it will throw an error. However, with the newly introduce the function of CONCAT in SQL Server 2012 we do not have to worry about this kind of issue. It concatenates strings and integers without casting or converting them. You can specify various values as a parameter to CONCAT functions and it concatenates them together. Let us see how to concat the values in Sixty Seconds: Here is the script which is used in the video. -- Method 1: Concatenating two strings SELECT 'FirstName' + ' ' + 'LastName' AS FullName -- Method 2: Concatenating two Numbers SELECT CAST(1 AS VARCHAR(10)) + ' ' + CAST(2 AS VARCHAR(10)) -- Method 3: Concatenating values of table columns SELECT FirstName + ' ' + LastName AS FullName FROM AdventureWorks2012.Person.Person -- Method 4: SQL Server 2012 CONCAT function SELECT CONCAT('FirstName' , ' ' , 'LastName') AS FullName -- Method 5: SQL Server 2012 CONCAT function SELECT CONCAT('FirstName' , ' ' , 1) AS FullName Related Tips in SQL in Sixty Seconds: SQL SERVER – Concat Function in SQL Server – SQL Concatenation String Function – CONCAT() – A Quick Introduction 2012 Functions – FORMAT() and CONCAT() – An Interesting Usage A Quick Trick about SQL Server 2012 CONCAT Function – PRINT A Quick Trick about SQL Server 2012 CONCAT function What would you like to see in the next SQL in Sixty Seconds video? Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Database, Pinal Dave, PostADay, SQL, SQL Authority, SQL in Sixty Seconds, SQL Query, SQL Scripts, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL, Technology, Video Tagged: Excel

    Read the article

  • Configuring VirtualBox host only networking: OSX host, Ubuntu guest

    - by Greg K
    I have a Ubuntu guest configured with two interfaces, eth0 is using NAT and works fine, I can access the net. The second interface eth1 is set to host only networking and VirtualBox has created a vboxnet0 virtual adapter on the host. I've configured vboxnet0 in VirtualBox adapter settings with the following: ip 192.168.21.20 subnet 255.255.255.0 Once the VM guest is running, ifconfig on OSX has vboxnet0 setup as: vboxnet0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether 0a:00:27:00:00:00 inet 192.168.21.20 netmask 0xffffff00 broadcast 192.168.21.255 In the guest, eth0 is set to use DHCP, I've statically assigned eth1 to 192.168.21.20 (is this a mistake?): auto eth1 iface eth1 inet static address 192.168.21.20 netmask 255.255.255.0 network 192.168.21.0 broadcast 192.168.21.255 gateway 192.168.21.1 There is no device on 192.168.21.1 - what should I set my gateway to? In the guest the routes look like so: Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.21.0 * 255.255.255.0 U 0 0 0 eth1 10.0.2.0 * 255.255.255.0 U 0 0 0 eth0 default 10.0.2.2 0.0.0.0 UG 100 0 0 eth0 default 192.168.21.1 0.0.0.0 UG 100 0 0 eth1 Route table on OSX: $ netstat -nr Routing tables Internet: Destination Gateway Flags Refs Use Netif Expire default 10.77.36.1 UGSc 28 0 en1 10.77.36/22 link#5 UCS 5 0 en1 10.77.39.38 127.0.0.1 UHS 1 2236 lo0 10.77.39.255 link#5 UHLWbI 1 66 en1 127 127.0.0.1 UCS 0 0 lo0 127.0.0.1 127.0.0.1 UH 1 8642 lo0 169.254 link#5 UCS 0 0 en1 192.168.21 link#7 UC 2 0 vboxnet 192.168.21.20 a:0:27:0:0:0 UHLWI 0 4 lo0 192.168.21.255 link#7 UHLWbI 2 64 vboxnet I can't SSH from the host to the guest (I used to be able to when the VM was configured with a bridged connection): $ ssh 192.168.21.20 ssh: connect to host 192.168.21.20 port 22: Connection refused What have I done wrong here? TIA

    Read the article

  • RDS installation failure on 2012 R2 Server Core VM in Hyper-V Server

    - by Giles
    I'm currently installing a test-bed for my firms Infrastructure replacement. 10 or so Windows/Linux servers will be replaced by 2 physical servers running Hyper-V server. All services (DC, RDS, SQL) will be on Windows 2012 R2 Server Core VMs, Exchange on Server 2012 R2 GUI, and the rest are things like Elastix, MailArchiver etc, which aren't part of the equation thus far. I have installed Hyper-V server on a test box, and sucessfully got two virtual DC's running, SQL 2014 running, and 8.1 which I use for the RSAT tools. When trying to install RDS (The old fashioned kind, not the newer VDI(?) style), I get a failed installation due to the server not being able to reboot. A couple of articles have said not to do it locally, so I've moved on. Sitting at the Powershell prompt on the Domain Controller or SQL server (Both Server Core), I run the following commands: Import-Module RemoteDesktop New-SessionDeployment -ConnectionBroker "AlstersTS.Alsters.local" -SessionHost "AlstersTS.Alsters.local" The installation begins, carries on for 2 or 3 minutes, then I receive the following error message: New-SessionDeployment : Validation failed for the "RD Connection Broker" parameter. AlstersTS.Alsters.local Unable to connect to the server by using WindowsPowerShell remoting. Verify that you can connect to the server. At line:1 char:1 + NewSessionDeployment -ConnectionBroker "AlstersTS.Alsters.local" -SessionHost " ... + + CategoryInfo : NotSpecified: (:) [Write-Error], WriteErrorException + FullyQualifiedErrorID : Microsoft.PowerShell.Commands.WriteErrorException,New-SessionDeployment So far, I have: Triple, triple checked syntax. Tried various other commands, and a script to accomplish the same task. Checked DNS is functioning as it should. Checked to the best of my knowledge that AD is working as it should. Checked that the Network Service has the needed permissions. Created another VM and placed the two roles on different servers. Deleted all VMs, started again with a new domain name (Lather, rinse, repeat) Performed the whole installation on a second physical box running Hyper-V Server Pleaded with it Interestingly, if I perform the installation via a GUI installation, the thing just works! Now I know I could convert this to a Server Core role after installation, but this wouldn't teach me what was wrong in the first instance. I've probably got 10 pages through various Google searches, each page getting a little less relevant. The closest matches seem to have good information, but it doesn't seem to be the fix for my set-up. As a side note, I expected to be able to "tee" or "out-file" the error message into a text file, but couldn't get that to work either, so I've typed in the error message manually. Chaps, any suggestions, from the glaringly obvious, to the long-winded and complex? Thanks!

    Read the article

  • Uninstalling Reporting Server 2008 on Windows Server 2008

    - by Piotr Rodak
    Ha. I had quite disputable pleasure of installing and reinstalling and reinstalling and reinstalling – I think about 5 times before it worked – Reporting Server 2008 on Windows Server with the same year number in name. During my struggle I came across an error which seems to be not quite unfamiliar to some more unfortunate developers and admins who happen to uninstall SSRS 2008 from the server. I had the SSRS 2008 installed as named instance, SQL2008. I wanted to uninstall the server and install it to default instance. And this is when it bit me – not the first time and not the last that day . The setup complained that it couldn’t access a DLL: Error message: TITLE: Microsoft SQL Server 2008 Setup ------------------------------ The following error has occurred: Access to the path 'C:\Windows\SysWOW64\perf-ReportServer$SQL2008-rsctr.dll' is denied. For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.0.1600.22&EvtType=0x60797DC7%25400x84E8D3C0 ------------------------------ BUTTONS: OK This is a screenshot that shows the above error: This issue seems to have a bit of literature dedicated to it and even seemingly a KB article http://support.microsoft.com/kb/956173 and a similar Connect item: http://connect.microsoft.com/SQLServer/feedback/details/363653/error-messages-when-upgrading-from-sql-2008-rc0-to-rtm The article describes issue as following: When you try to uninstall Microsoft SQL Server 2008 Reporting Services from the server, you may receive the following error message: An error has occurred: Access to the path 'Drive_Letter:\WINDOWS\system32\perf-ReportServer-rsctr.dll' is denied. Note Drive_Letter refers to the disc drive into which the SQL Server installation media is inserted. In my case, the Note was not true; the error pointed to a dll that was located in Windows folder on C:\, not where the installation media were. Despite this difference I tried to identify any processes that might be keeping lock on the dll. I downloaded Sysinternals process explorer and ran it to find any processes I could stop. Unfortunately, there was no such process. I tried to rerun the installation, but it failed at the same step. Eventually I decided to remove the dll before the setup was executed. I changed name of the dll to be able to restore it in case of some issues. Interestingly, Windows let me do it, which means that indeed, it was not locked by any process. I ran the setup and this time it uninstalled the instance without any problems:   To summarize my experience I should say – be very careful, don’t leave any leftovers after uninstallation – remove/rename any folders that are left after setup has finished. For some reason, setup doesn’t remove folders and certain files. Installation on Windows Server 2008 requires more attention than on Windows 2003 because of the changed security model, some actions can be executed only by administrator in elevated execution mode. In general, you have to get used to UAC and a bit different experience than with Windows Server 2003. Technorati Tags: SQL Server 2008,Windows Server 2008,SRS,Reporting Services

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >