Search Results

Search found 45 results on 2 pages for 'outbox'.

Page 1/2 | 1 2  | Next Page >

  • Outlook 2003 items stuck in outbox after sent (POP3)

    - by Saif Khan
    Hi, I have a PC, when the user sends an item it's stuck in the outbox after sending. The strange thing is that the mails are being sent to the recepient. It's just that Outlook doesn't move it from Outbox to Sent Items...I checked all the settings and all is well. This is a POP3 account. What else can I check?

    Read the article

  • c#: sms appears to have been sent, but stuck in phone outbox

    - by I__
    i wrote code to send an SMS using my gsm phone which is attached to the computer through com port. the code is below. the problem is i do see that it is in the outbox of the phone and it actually appears to have been sent, but when i contact the recipient they say that i have not received the message. i test the phone, and i create and send a message using only the phone and it works perfectly, however when i do this with my code, it APPEARS to have been sent, and i am getting all the correct AT COMMAND responses from the phone, but the message is actually NOT sent. here is the code: using System; using System.Collections.Generic; using System.ComponentModel; using System.Data; using System.Drawing; using System.Linq; using System.Text; using System.Windows.Forms; using System.Threading; using System.IO.Ports; namespace WindowsFormsApplication1 { public partial class Form1 : Form { SerialPort serialPort1; int m_iTxtMsgState = 0; const int NUM_MESSAGE_STATES = 4; const string RESERVED_COM_1 = "COM1"; const string RESERVED_COM_4 = "COM4"; public Form1() { InitializeComponent(); this.Closing += new CancelEventHandler(Form1_Closing); } private void Form1_Load(object sender, EventArgs e) { serialPort1 = new SerialPort(GetUSBComPort()); if (serialPort1.IsOpen) { serialPort1.Close(); } serialPort1.Open(); //ThreadStart myThreadDelegate = new ThreadStart(ReceiveAndOutput); //Thread myThread = new Thread(myThreadDelegate); //myThread.Start(); this.serialPort1.DataReceived += new SerialDataReceivedEventHandler(sp_DataReceived); } private void Form1_Closing(object sender, System.ComponentModel.CancelEventArgs e) { serialPort1.Close(); } private void SendLine(string sLine) { serialPort1.Write(sLine); sLine = sLine.Replace("\u001A", ""); consoleOut.Text += sLine; } public void DoWork() { ProcessMessageState(); } public void ProcessMessageState() { switch (m_iTxtMsgState) { case 0: m_iTxtMsgState = 1; SendLine("AT\r\n"); //NOTE: SendLine must be the last thing called in all of these! break; case 1: m_iTxtMsgState = 2; SendLine("AT+CMGF=1\r\n"); break; case 2: m_iTxtMsgState = 3; SendLine("AT+CMGW=" + Convert.ToChar(34) + "+9737387467" + Convert.ToChar(34) + "\r\n"); break; case 3: m_iTxtMsgState = 4; SendLine("A simple demo of SMS text messaging." + Convert.ToChar(26)); break; case 4: m_iTxtMsgState = 5; break; case 5: m_iTxtMsgState = NUM_MESSAGE_STATES; break; } } private string GetStoredSMSID() { return null; } /* //i dont think this part does anything private void serialPort1_DataReceived_1(object sender, System.IO.Ports.SerialDataReceivedEventArgs e) { string response = serialPort1.ReadLine(); this.BeginInvoke(new MethodInvoker(() => textBox1.AppendText(response + "\r\n"))); } */ void sp_DataReceived(object sender, SerialDataReceivedEventArgs e) { try { Thread.Sleep(500); char[] msg; msg = new char[613]; int iNumToRead = serialPort1.BytesToRead; serialPort1.Read(msg, 0, iNumToRead); string response = new string(msg); this.BeginInvoke(new MethodInvoker(() => textBox1.AppendText(response + "\r\n"))); serialPort1.DiscardInBuffer(); if (m_iTxtMsgState == 4) { int pos_cmgw = response.IndexOf("+CMGW:"); string cmgw_num = response.Substring(pos_cmgw + 7, 4); SendLine("AT+CMSS=" + cmgw_num + "\r\n"); //stop listening to messages received } if (m_iTxtMsgState < NUM_MESSAGE_STATES) { ProcessMessageState(); } } catch { } } private void button1_Click(object sender, EventArgs e) { m_iTxtMsgState = 0; DoWork(); } private void button2_Click(object sender, EventArgs e) { string[] sPorts = SerialPort.GetPortNames(); foreach (string port in sPorts) { consoleOut.Text += port + "\r\n"; } } private string GetUSBComPort() { string[] sPorts = SerialPort.GetPortNames(); foreach (string port in sPorts) { if (port != RESERVED_COM_1 && port != RESERVED_COM_4) { return port; } } return null; } }

    Read the article

  • Why do some emails sent in Outlook 2010 get stuck in Outbox with date set to "None"?

    - by Matt
    I'm using Outlook 2010 against Exchange 2007. Emails I compose sometimes get stuck in the Outbox with date "None" as shown below. These emails never leave the outbox unless I delete them and recompose. Sometimes the problem happens again until I restart the client. Additionally, if I open a good (one with today's date) email from the outbox and then send it, it too gets dated "None" and never gets sent.

    Read the article

  • How to remove an email which is stuck in the outbox of the Windows 8 Mail app

    - by hcl
    It's already the second time, I have an E-Mail in the outbox of the Mail-app of Windows 8 which is stuck. I don't see the exact reason why this happens (I have no big files attached to the mails and the recipient is valid). The first time I have had this problem, I have not found a simple way to remove the stucked email. I solved the Problem by removing the accounts from the mail app and then adding the same accounts newly to the app. However I'm wondering if there is a more simple way of doing this? Does someone know how to remove an email which is stuck in the outbox?

    Read the article

  • Outgoing email getting stuck in outbox and sent out multiple times.

    - by Alain
    I have someone with 3 accounts on Outlook - one of them is giving trouble, in that when sending mail from it, it gets stuck in the outbox, saying it hasn't sent yet. When it finally does send off, he gets reports that about 10 copies have been received. The webmail associated with that account works fine, which means the hosting company (Godaddy) hasn't been helpful in solving this problem. It seems to be an Outlook issue. The other two email accounts (one of which is also a Godaddy email), work normally.

    Read the article

  • Android - Querying the SMS ContentProvider?

    - by Donal Rafferty
    I currently register a content observer on the following URI "content://sms/" to listen out for incoming and outgoing messages being sent. This seems to work ok and I have also tried deleting from the sms database but I can only delete an entire thread from the following URI "content://sms/conversations/" Here is the code I use for that String url = "content://sms/"; Uri uri = Uri.parse(url); getContentResolver().registerContentObserver(uri, true, new MyContentObserver(handler)); } class MyContentObserver extends ContentObserver { public MyContentObserver(Handler handler) { super(handler); } @Override public boolean deliverSelfNotifications() { return false; } @Override public void onChange(boolean arg0) { super.onChange(arg0); Log.v("SMS", "Notification on SMS observer"); Message msg = new Message(); msg.obj = "xxxxxxxxxx"; handler.sendMessage(msg); Uri uriSMSURI = Uri.parse("content://sms/"); Cursor cur = getContentResolver().query(uriSMSURI, null, null, null, null); cur.moveToNext(); String protocol = cur.getString(cur.getColumnIndex("protocol")); if(protocol == null){ Log.d("SMS", "SMS SEND"); int threadId = cur.getInt(cur.getColumnIndex("thread_id")); Log.d("SMS", "SMS SEND ID = " + threadId); Cursor c = getContentResolver().query(Uri.parse("content://sms/outbox/" + threadId), null, null, null, null); c.moveToNext(); int p = cur.getInt(cur.getColumnIndex("person")); Log.d("SMS", "SMS SEND person= " + p); //getContentResolver().delete(Uri.parse("content://sms/outbox/" + threadId), null, null); } else{ Log.d("SMS", "SMS RECIEVE"); int threadIdIn = cur.getInt(cur.getColumnIndex("thread_id")); getContentResolver().delete(Uri.parse("content://sms/outbox/" + threadIdIn), null, null); } } } However I want to be able to get the recipricant and the message text from the SMS Content Provider, can anyone tell me how to do this? And also how to delete one message instead of an entire thread?

    Read the article

  • Windows Fax Server Leaves Documents in "Pending" Status

    - by Chris
    We are having an issue with Windows Fax Server on Windows Server 2008. Occasionally, the server will get into a state where after adding jobs to the outbox, they will simply remain at the pending status (without any attempt to send them). There is nothing in the event log mentioning a problem. It typically seems to enter the state after restarting the server or after no faxes have been sent for a while. The way to fix the issue has been to: Stop the Fax service Go into the modem properties in device manager and query modem Start the Fax service - at which point all the pending faxes in the outbox will send.

    Read the article

  • Outlook connected to exchange does not send email

    - by Thomas de Nooij
    I have multiple machines with Outlook 2010 connected to RackSpace hosted exchange server. Everything works fine, but emails send after a while since outlook started will not leave the outbox. Clicking Send & Receive will display the progress bar at 100% completed with no errors, but is not really finishing. The Cancel All button is still active. The emails in the outbox are bold & italic, so ready to be send. When I close outlook and start it again, the mails are sent immediately without problems. I have tried the following: Checked if there are any third party addins: only Microsoft Add ins Checked if the virus scanner is blocking anything, but McAfee is not doing this. Checked and Repaired the .ost file Increased the server time-out from 30 seconds to 60 seconds Nothing helped. Any suggestions?

    Read the article

  • How to implement a bidirectional "mailbox service" over tcp?

    - by igorgatis
    The idea is to allow to peer processes to exchange messages (packets) over tcp as much asynchronously as possible. The way I'd like it to work is each process to have an outbox and an inbox. The send operation is just a push on the outbox. The receive operation is just a pop on the inbox. Underlying protocol would take care of the communication details. Is there a way to implement such mechanism using a single TCP connection? How would that be implemented using BSD sockets and modern OO Socket APIs (like Java or C# socket API)?

    Read the article

  • Outlook 2007, how to stop replies from being sent if they meet criteria

    - by CChriss
    I have my college's email account auto-forwarded (they don't offer pop3 or imap) to my main gmail account so I don't have to go to their website to check for mail. That gmail account, and others, use pop3 down to my Outlook 2007. In my Outlook, I have a rule that puts mail sent to my @college address into a folder named Collegemail. Since the college email system lacks pop3 or imap, I have to go to their site to send a reply, so that the reply will be sent from my @college email address. The problem is that I cannot seem to get into the habit of going to my college's website to reply to those emails, so quite often I reply to them while in Outlook, which means my replies are sent "from" my main gmail address. How can I set up Outlook to either 1) disable replying to emails in the Collegemail folder or to emails where my college email address is in the original To: line, or else 2) set it to send those replies from a non-functional dummy account. The dummy account would be unable to send the email so the email would be stuck in the Outbox. (I already have the non-functional dummy account set up as Outlook's "Default" account. When I compose a new mail I have to deliberately pick one of my good accounts to send the new mail with, or else Outlook uses the default dummy account and the email stays in the Outbox with a Send error.) Thanks. Update: Anybody? Please help.

    Read the article

  • Excel - "send to Mail recipient" creates 2nd copy of EMail in Inbox

    - by ssollinger
    When sending Excel sheets using the menu item "File" - "Sent To" - "Mail recipient (as attachment)" I get additional copies of the email in the Inbox. When I press "send" then I get 2 copies of the email in Outlook - as expected one in the Outbox (which moves into the Sent folder as soon it is sent off) and an additional one in the Inbox. How do I stop the copy message appearing in the Inbox? System: Excel 2000, Outlook 2000, Windows XP. Antivirus is AVG Free 2011. I know this is a very old system, but it is not my PC and there isn't any chance to get it replaced in the near future yet. SOme further details: The copy in the inbox appears at the same time as the normal copy goes into the Outbox (i.e. as soon I press send). It doesn't contain anything in the From field (i.e. there is no sender, just the recipient of the mail). It has a different icon in Outlook to the other emails - the icon is the one for "saved or unsent message". I tried it with a few different spreadsheets and it happens with all of them. It happens with every recipient, and it only happens if sending from within Excel (i.e. using the Send to menu item). I can delete the attachment before sending and it will still create a copy. If I create a new message in Outlook and then add the Excel document as attachment then I don't get the copy of the message in the inbox, it only happens when using the send to item in Excel. It only started doing this recently. Around that time the Antivirus (AVG Free) was upgraded to the latest version (from the previous version - 2010? - to version 2011), but this might not be related. I thought I know Excel really well but have never seen this happening before, and I can't find any setting in Excel or Outlook that is causing this. Any ideas?

    Read the article

  • Kalkun not send SMS [closed]

    - by user512213
    i succussfully installed gammu for sending sms and its works fine while i try to send sms via console then i try to install Kalkun web interface for sending SMS as per the instruction given by below link https://github.com/back2arie/Kalkun/wiki/Installation Web interface works fine but while i try to send sms means its always sent to outbox not delivered to specified no also Status at the right top cornor shows "status:unkown" Any one guide me to resolve this issue..

    Read the article

  • Can I see the SMTP session log when Mail.app connects to an SMPT server?

    - by Charles Stewart
    Problem: I've set up a mail server using SASL authentication, and have given Mail.app (on Mac Os 10.4) the login information it needs to connect. I wrote a test message for it to deliver to my server: the Activity window shows that it tries to deliver the message, but then it simply stops, with no indication of error, except that the test message is left in the Outbox. How can I find out what went wrong? Is there some log file I don't know about?

    Read the article

  • Cannot send emails from outlook 2010 for an exchange account

    - by Mahmoud Saleh
    i have setup an exchange 2010 account on microsoft outlook 2010 and i can read my emails, but i am not able to send emails, when i create a new email and click send, the messages are not sent, they don't even get to the outbox folder. my guess is that the issue is not from exchange itself, becuase i can send emails with this exchange account with java code using smtp port 25 please advise how to fix this issue.

    Read the article

  • Sending a Message in Outlook

    - by xxl3ww
    Is there any way to configure outlook to send messages without Outlook being open? We're currently using a system where the "Email Page" opens a outlook Sendto window. You can click "Send", but the message stays in the (Outbox) until you open Outlook. I'm trying to get around opening Outlook. Anyone have any ideas?

    Read the article

  • How can I downgrade my version of Evolution to the one used in Ubuntu 11.04?

    - by Johnny
    I just upgraded, and like a few other users I had issues with Evolution email after the upgrade from 11.04 to 11.10 and then 12.04. I know to make backups, but in this case I stupidly didn't think that the program would be changed (Firefox wasn't modified at all), and so I failed to make a backup. Three days later I am still having issues, and recovering the emails is proving to be difficult with only partial recovery or it not working at all. My question is, can I add in some source to use the 11.04 version of Evolution, since that version was working fine and would know what to do with the current files (Inbox, Outbox, etc.) I also noticed that Evolution's restore feature said it changed the way emails are handled, so it seems like a downgrade could put everything back to normal. Worst case scenario, I start over, but I wanted to try everything first. Thanks in advance! I'm also open to any suggestions for restoring the old emails files to the current version of Evolution.

    Read the article

  • no sms deleted folder?

    - by Nicholas
    Hi, I'm new to Android and trying to convert a Windows Mobile app to java/android. In WM there are the followning standard folders: Inbox,Sent, dratfs, outbox, deleted. I'm able to access all folders except deleted with Uri.parse("content://sms/XXXXXX") 1) Is deleted folder missing? 2) Is it possible to create user folders, like "content://sms/My Folder" Thanks, Nicholas

    Read the article

  • Grouped items in Table view like the Mail app on the iPad

    - by happyCoding25
    Hello, I'm trying to figure out how to group items like the grouped mail boxes in the mail app. I need it to be like selecting a mail box, when you tap it it loads new data, your inbox outbox and all of the other boxes for that mail account. Then you can tap back and return to all of your accounts. If anyone has a little sample code they could show or explain how one might go about doing this any help is appreciated. (Note: Im using the split view template) Thanks

    Read the article

  • removing contents of div using Jquery "empty" doesn't work

    - by Andrew
    I'm trying to remove contents of particular div which are basically list items and a heading by using jquery empty so that I could replace with new contents. What happens when I run the code is, the whole div element blinked and flash the replaced content and then the old one reappear. Can anyone tell me what am I doing wrong? Here's an excerpt of my code - <pre> $("#msg_tab").bind("click",function(){ $("#sidebar1").remove(); var html="<ul><li><h2>test</h2><ul><li><a href='#'>Compose New Message</a></li><li><a href='#'>Inbox</a></li><li><a href='#'>Outbox</a></li><li><a href='#'>Unread</a></li><li><a href='#'>Archive</a></li></ul></li></ul>"; $("#sidebar1").append(html); }); <div id="sidebar1" class="sidebar"> <ul> <li> <h2>Messages</h2> <ul> <li><a href="#">Compose New Message</a></li> <li><a href="#">Inbox</a></li> <li><a href="#">Outbox</a></li> <li><a href="#">Unread</a></li> <li><a href="#">Archive</a></li> </ul> </li> </ul> </div> Another question is, how do I write multiple line html code string in javascript so that java would recognize as a string value? Placing forward slash at the end is ok when the string is not a html code but, in html code, I can't figure out how to escape forward slash from ending tags.I've tried escaping it with backward slash but doesn't work. I would be appreciated if anyone could shed a light on this matter as well.

    Read the article

  • How to prove that an email has been sent?

    - by bguiz
    I have a dispute on my hands in which the other party (landlord's real estate agent) dishonestly claims to not have received an email that I truly did send. My questions is, what are the ways to prove that the email was indeed sent? Thus far, the methods that I have already thought of are: Screenshot of the mail in the outbox Forwarding a copy of the original email I am aware of other things like HTTP/ SMTP headers etc that would exist as well. Are these useful for my purposes, and if so how do I extract these? The email in question was sent using Yahoo webmail ( http://au.mail.yahoo.com/ ). Edit: I am not seeking legal advice here, just technical advice as to how to gather this information.

    Read the article

  • Deleted items on Deleted Items folder are not shown

    - by Ken
    When I run this cmdlet, I get the following result: [PS] C:\Windows\system32Get-MailboxFolderStatistics user | ft FolderPath, FolderSize -autosize FolderPath FolderSize ---------- ---------- /Top of Information Store 156 B (156 bytes) /Calendar 244.2 KB (250,025 bytes) /Contacts 1.223 MB (1,282,252 bytes) /Contacts/SenderPhotoContacts 30.41 KB (31,139 bytes) /Conversation Action Settings 0 B (0 bytes) /Conversation History 206.2 KB (211,147 bytes) /Deleted Items 1.449 MB (1,519,602 bytes) /Drafts 472 B (472 bytes) /Inbox 618 MB (648,025,798 bytes) /Journal 144 B (144 bytes) /Junk E-Mail 131.9 KB (135,089 bytes) /News Feed 0 B (0 bytes) /Notes 1.847 KB (1,891 bytes) /Outbox 0 B (0 bytes) /Quick Step Settings 0 B (0 bytes) /RSS Feeds 0 B (0 bytes) /Sent Items 6.754 KB (6,916 bytes) /Suggested Contacts 9.316 KB (9,540 bytes) /Sync Issues 0 B (0 bytes) /Sync Issues/Conflicts 0 B (0 bytes) /Sync Issues/Local Failures 0 B (0 bytes) /Sync Issues/Server Failures 0 B (0 bytes) /Tasks 7.994 KB (8,186 bytes) /Recoverable Items 12.16 MB (12,748,519 bytes) /Deletions 0 B (0 bytes) /Purges 0 B (0 bytes) /Versions 0 B (0 bytes) But when I open the mailbox using both Outlook and OWA, the deleted items folder is empty. I'm guessing it's corrupted or something like that. Is it possible to recover it somehow? Thanks.

    Read the article

1 2  | Next Page >