Search Results

Search found 311 results on 13 pages for 'adsl'.

Page 10/13 | < Previous Page | 6 7 8 9 10 11 12 13  | Next Page >

  • multicast and iptables

    - by Massimo
    I have secured a linux box, starting with iptables -P INPUT DROP iptables -P OUTPUT DROP iptables -P FORWARD DROP and after adding rules to enable specific protocols and streams. Which are the correct rules to add multicast support ? I am trying with these - for both client and server multicast : iptables -A INPUT -m pkttype --pkt-type multicast -j ACCEPT iptables -A OUTPUT -m pkttype --pkt-type multicast -j ACCEPT iptables -A INPUT --protocol igmp -j ACCEPT iptables -A OUTPUT --protocol igmp -j ACCEPT iptables -A INPUT --dst "224.0.0.0/4" -j ACCEPT iptables -A OUTPUT --dst "224.0.0.0/4" -j ACCEPT Linux 2.6.38-12 / iptables 1.4.10 Is there any internet service to test my multicast set ( pc + adsl router + provider ) ?

    Read the article

  • What are the essential considerations for setting up systems in a location with unreliable power?

    - by dunxd
    I deal with a lot of remote offices located in parts of the world where the local grid power supply is unreliable. Power can go off anytime with no warning, with outages ranging from minutes to days Power fluctuation is wild, with spikes and brown outs Currently the offices will have some or all of the following: A generator, with an inverter, or some sort of manual switch A big UPS or battery array connecting a number of devices Several smaller APC UPS with computers attached Low cost Voltage Regulators sometimes connected between mains and UPS or device. I know that each of these things needs to be appropriately rated for the equipment to which it is connected (although I am not sure how to calculate the correct rating). The offices will generally have the following equipment (in varying quantities): some sort of internet connection device (VSAT router, ADSL modem, WiMax router) Cisco ASA 5505 firewall a bunch of PCs printers one server I don't seek to replace the advice of an electrician, but in some of these locations they only answer the questions you ask them, so I need to make sure I have enough understanding of the essentials to protect equipment from damage, and possibly get through some power cuts.

    Read the article

  • After a period of time, nslookup still works, but pinging, and an auto-refeshed website, fails.

    - by Mark Hurd
    Contrary to this SO question this is for a dotted name (gw.localnet.au), and it doesn't happen straight away. Only after some period of time (quite a long time, possibly days). In fact this is for my ADSL router and its internal IP address which I have named within the router itself and in my Windows Server 2003 Domain Controller DNS Service. Specifically, localnet.au is a Active-Directory-backed primary domain. In fact, an ipconfig /flushdns may fix the problem, but only after a while (about the time it took me to type in this question :-) ). That doesn't explain the root cause though... Manually transferred from stackoverflow.com

    Read the article

  • My Laptop (HP/Compaq 2510p) running ubuntu 10.04 LTS keeps losing the WLAN connection.

    - by Ernelli
    I am using Wicd and can successfully connect to my ADSL router (Thomson TG 787) using WPA PSK. But with regular interval I lose the ability to connect to Internet. I can ping the GW and can actually ping servers on the Internet but not connect to them using HTTP (Tested with both Firefox and wget). I would suspect the router unless for the fact that the problem does not show up when running Windows XP on the same computer and also, when the problem arises, a simple disconnect/connect in Wicd solves the problem, which does not involve the router (Except for the DHCP request). I have searched Ubuntu forums without luck, most problems described relate to specific network drivers or other problems. Does anyone have the same experience with Linux/Ubuntu and WLAN?

    Read the article

  • My computer gets hosted when using 3G

    - by WeaklyTyped
    I recently activated 3G(UMTS) connection on my cellular network. I use Nokia S60 phone as a modem while connecting from Scientific Linux 6. While I am able to access net pretty well, the problem is my computer gets hosted. By using ip-address in a web-browser, anyone can access my localhost (running apache), this never happens with my wireline (ADSL) connection. Furthermore, even the Shell prompt changes from: [mach2@localhost ~]$ to [[email protected] ~]$ where XX.XX.XX.XX is the IP of the 3G connection. The very thought of putting my machine 'in the wild' is disconcerting. How can I rectify the situation without disabling services like apache, sshd and others?

    Read the article

  • Connect macbook to my LAN through a VPN - best solution? [closed]

    - by LewisMc
    So I have a LAN connected via a ADSL/PPPoA, this is using a bog-standard DLink router supplied by my ISP (talktalk UK). I have a NAS within the LAN that is running FreeNAS and I want to be able to connect to it when I'm out and about. It's running an atom so it's quite low on juice consumption but I don't want to have it on all day and night so I've been waking it via a magic packet and booting it down from the web admin when I need it. So I want to connect to the LAN, I presume via a VPN, to be able to send a magic packet. But what is the best method to accomplish this, or is there an easier way? I've been looking at the cisco 857 integrated router and the Netgear prosafe 318(behind modem) but not sure If I'm on the right track with what I want to achieve as I've not much experience or knowledge with VPN's or networking (software engineering student). I have tried port forwarding but to no avail, either with magic packets or even connecting outside the LAN via DYNDNS. Thanks,

    Read the article

  • How can I restrict my mates to stop downloading?

    - by user239295
    We are sharing an internet broadband connection with 6 users at a place we live. We get 20 gb fup ( Fair usage policy) with 2 mbps speed from the ISP after the 20 gb is consumed the speed comes down to 512 kbps very difficult to browse any page. The problem is we cannot track which user/mate is downloading and ending the FUP. it is very difficult to track so is there something that we can allot per user some amount of space like 2 gb of downloading or restrict all from downloading so that we can utilize all the fup till the end of the month. We are using this connection as wifi configured. A adsl router is configured as wifi and we all using all 6 laptops. No PC. Any help would be appreciated. I apologize if i am not clear with my question.

    Read the article

  • Share laptop wifi with router

    - by obie
    I hi guys i'm trying to accomplish something: i have a modem (ADSL) which servers as a wireless router as well. There's a laptop connected to it through cable. On the other room i have a laptop which is connected through the router wirelessly. Now the problem is, since i have other appliances that need to get connected but are not wifi cable i have another wifi router. What i want to know is how can i share the second laptop's wifi with the second router so that the router can then serve as an access point to give internet to my other applinaces through ethernet cables. so in breaf i want: INTERNETMODEM (WIFI)LAPTOP 1 (WIFI)LAPTOP 2 (WIFI)Router 2 (ETHERNET)DREAMBOX & WDTV

    Read the article

  • Connect a Sitecom WL-174 to another wireless router

    - by Thijs Wouters
    I used to connect via a Sitecom WL-174 directly to ADSL internet. There were some pc's which connected wirelessly and some connected with a wire. Now we got another provider and we need to use the router which came with it. It is also a wireless router. It works perfectly. But I need to connect the other pc's which were connected with a wire previously. Is it possible to connect the Sitecom router wirelessly to the other router? If so, how? Thanks.

    Read the article

  • Installing WiFi in a church for internet access

    - by Dave Griffiths
    Hi, a colleague at work asked this question: My local church want to get WiFi enabled in the whole of their offices and main church building. The offices and main building are in the same overall structure and so the signal does not need to travel outside to any other buildings outside this main structure. Where would I start on such a project and what kind of repeaters are needed (and how are they set up) given that some of the walls are pretty thick. Do you still have one ADSL line coming in to router or are there some options of having two lines coming in so that they isn't a single point of failure. Am looking at fibre for the broadband for increased speed. Any starting pointers appreciated.

    Read the article

  • WIFI connection interfering with Windows Server 2003 Active Directory domain. (How to debug?)

    - by Vinko Vrsalovic
    RELATED: This question has led me to ask this one. I had to change our unnamed crappy ADSL router to a crappy Comtrend CT-5361 WiFi router, now every WiFi connection to the domain doesn't work correctly: Joining the domain is impossible (see related question) Logging into the domain takes ages Authentication usually fails Question: How to debug this and pinpoint the exact problem? I have no enough knowledge on either WiFi networks or on Active Directory to know which connections are made at which stages nor how to check what's happening at the wireless level to compare what should happen to what is happening. I'm looking for resources to learn what should be happening and tools to detect what is actually happening (I expect a sniffer should be enough, but if there are better, more specialized tools, that'd be great).

    Read the article

  • Network configuration for several LANs and a shared server

    - by Grodriguez
    I want to setup a network on a building to provide shared services to all homes within the building. This should work as follows: Each home has a private LAN (e.g. 192.168.0.x) and an ADSL router for Internet access. Private LANs from each home should not "see" each other. There will be a shared server on the building which must be accessible from every home. I am not sure what is the best way to achieve this. Can someone point in the right direction? Thanks.

    Read the article

  • Mount Ubuntu shares remotely with Mac and Windows

    - by Donald
    First time on here so please be gentle! I have setup a small school network with a Ubuntu 12.04 Server for use as a fileserver mainly. I have managed to set the server up (all command line based - no GUI) and setup the Samba shares, which works really well internally. Internally, the school have a combination of Mac's and Windows machines and they can all access the shares happily. The school has a fixed IP ADSL connection and I have added a route in the router to allow me remote access to the server using SSH (port 22). That also works well. All good so far! What I now want to do is allow remote access to the shares. I have done a bit of reading and thought I had found the answer with SSHFS but I am still non-the-wiser. So, my basic questions is: In Windows, how can I map to the Ubuntu shares across the internet through the router? In Mac OS, how can I add the remote share across the internet? The school used to have a Windows server and the users were used to creating a VPN and then pulling up the share folders etc, but I'm unsure how to do this with the Ubuntu server. I assume I need to add another route through the router too allow for SSHFS or something similar? Thanks in advance... Donald

    Read the article

  • apt-get update very slow, stuck at "Waiting for headers"

    - by Liam
    I have looked at similar questions: Stuck at 0% [waiting for headers] (apt) apt-get update stuck on "Waiting for Headers" However neither one of them answer my problem. I am running 12.04 AMD64 and have recently started getting an issue that when I update my repos from my connection at home through a terminal, using sudo apt-get update, it takes forever (literally after 2 hours it was at 28%), however when I run from a different location it takes less than 5 minutes to complete. I have attempted changing which mirror I use but that does not solve the issue. I have also cut down what is in my sources list but this also makes no difference. There are no faults on my ADSL line as I have already contacted my ISP to check this. It also makes no difference if I use a WiFi or network cable connection. What could be my issue? A speed test (www.speedtest.net) comes out at about 0.9 Mbps down and 0.42 Mbps up (which is a shade under the advertised line speed), I reside in South Africa and use the UCT LEG server. But I have also tried the other mirrors available in SA....none of them make a difference.

    Read the article

  • Apache DVB http video Streaming bandwidth or priority problem

    - by igino manfre'
    I'm streaming few precompressed DVB videos from cloud. The streams are generated from VLC on "impossible" ports (such as 64085, 64086 etc) reverse proxed by Apache on port 80 and 8080. All the generated streams are listed in "http://95.110.164.61/indexv.html". From an ADSL connection with enough downlink bandwidth, recalling the stream generated by VLC (such as "http://95.110.164.61:64087/mpg2_6.4") it flows fluently. Recalling the same stream proxed by Apache ("http://95.110.164.61/mpg2_6.4") the stream stops and goes. The only situation in which the Apache proxed streams flow regularly is from a site connected through 64 Mbps warranted bandwith with RTT to the server less than 10 mseconds. Please note that streams below 2 Mbps are fluently proxed. The system is a single core xeon with windows 2008 R2 on 4 GB of RAM with 1 Gbps of network bandwidth. The drain of computational and bandwidth resources is negligeable, the RAM usage always lower than 50%. On the system I run many VLC streamers. Any of them drains a variable amount of RAM (from about 25 to 70 MB). On the contrary the couple of httpd.exe processes drain no more than 7 MB. Using Wireshark (on the server) I see that VLC directy send to the client much more packets than Apache, and the stream is framgmented on many frames. I'm not a programmer, a newby of Apache. Can anyone please address me to a specific portion of the Apache's huge documentation? Thank you. igino

    Read the article

  • Kubuntu 11.10 Lot of Networking problems

    - by Cobraone
    Since I upgrade to 11.10 I have a lot of problems with KDE. First of all there are problems in configuring a static IP address. Just to explain @home I have a normal fiber ADSL and I use a DHCP. When I go to a customer I must insert a static IP address. With ifconfig everything seems ok but there is something wrong in searching DNS names. (I have installed Ubuntu and was going ok again). Now I Have reinstalled again Kubuntu 11.10 and I have the same problem in addition today I have discovered that if I connect to a network in another customer office the desktop freezes and I could only switch between windows with alt+tab. No FN key or right click to open run command works. So i unplugged network (configuration is just DHCP here) and tried on another position in office. It was the same. My Laptop freezes when connected, a fedora 14 of a friend works. So I decided to connect my Galaxy S II as USB network device. Everything is ok for like 3 minutes. When I noticed a little loss of signal again the desktop freezes and i must work (like now) just switching between windows with alt+tab). Additional information: Unplugging network or restarting it via Konsole does not not solve the freezing problem. Every time I must open a console and reboot. Any idea of what tests to do ? Just a recommendation: If I must post here logs or something else please guide me. I use Linux since Ubuntu 9 but I am not an "expert".

    Read the article

  • Help analyzing traceroute

    - by Abdulla
    Hello, my name is Abdulla and I'm from Kuwait. Sorry for my question as I know its not technically challenging. I'm facing some problems with my internet connection. My company has a DSL 2mb connection. My main problem is latency, in the morning its good but after that its gets really bad. My Internet provider says there's nothing wrong and that everything is working perfectly. I tried to explain to them the latency issue but they say that as long as I'm getting the download speed there isn't anything I can do about it. I only want to know if this is true and that the company can't do anything before I change my internet provider, as I feel that the guys at the contact center might getting back to me without asking tech support. Below are 2 traces I made, one in the morning and the other in the afternoon: This was taken around 17:00 Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp. C:\Documents and Settings\Administrator>ping google.com Pinging google.com [66.102.9.104] with 32 bytes of data: Reply from 66.102.9.104: bytes=32 time=387ms TTL=49 Reply from 66.102.9.104: bytes=32 time=388ms TTL=49 Reply from 66.102.9.104: bytes=32 time=375ms TTL=49 Reply from 66.102.9.104: bytes=32 time=375ms TTL=49 Ping statistics for 66.102.9.104: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 375ms, Maximum = 388ms, Average = 381ms C:\Documents and Settings\Administrator>ping google.com /t Pinging google.com [66.102.9.104] with 32 bytes of data: Reply from 66.102.9.104: bytes=32 time=376ms TTL=49 Reply from 66.102.9.104: bytes=32 time=382ms TTL=49 Reply from 66.102.9.104: bytes=32 time=371ms TTL=49 Reply from 66.102.9.104: bytes=32 time=378ms TTL=49 Reply from 66.102.9.104: bytes=32 time=374ms TTL=49 Reply from 66.102.9.104: bytes=32 time=371ms TTL=49 Reply from 66.102.9.104: bytes=32 time=365ms TTL=49 Reply from 66.102.9.104: bytes=32 time=366ms TTL=49 Reply from 66.102.9.104: bytes=32 time=353ms TTL=49 Reply from 66.102.9.104: bytes=32 time=331ms TTL=49 Reply from 66.102.9.104: bytes=32 time=333ms TTL=49 Reply from 66.102.9.104: bytes=32 time=348ms TTL=49 Reply from 66.102.9.104: bytes=32 time=365ms TTL=49 Reply from 66.102.9.104: bytes=32 time=346ms TTL=49 Reply from 66.102.9.104: bytes=32 time=335ms TTL=49 Reply from 66.102.9.104: bytes=32 time=340ms TTL=49 Reply from 66.102.9.104: bytes=32 time=344ms TTL=49 Reply from 66.102.9.104: bytes=32 time=333ms TTL=49 Reply from 66.102.9.104: bytes=32 time=328ms TTL=49 Reply from 66.102.9.104: bytes=32 time=332ms TTL=49 Reply from 66.102.9.104: bytes=32 time=326ms TTL=49 Reply from 66.102.9.104: bytes=32 time=333ms TTL=49 Reply from 66.102.9.104: bytes=32 time=325ms TTL=49 Reply from 66.102.9.104: bytes=32 time=333ms TTL=49 Reply from 66.102.9.104: bytes=32 time=338ms TTL=49 Reply from 66.102.9.104: bytes=32 time=341ms TTL=49 Ping statistics for 66.102.9.104: Packets: Sent = 26, Received = 26, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 325ms, Maximum = 382ms, Average = 348ms Control-C ^C C:\Documents and Settings\Administrator>travert google.com 'travert' is not recognized as an internal or external command, operable program or batch file. C:\Documents and Settings\Administrator>tracert google.com Tracing route to google.com [66.102.9.104] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 192.168.0.1 2 6 ms 6 ms 6 ms 80-184-31-1.adsl.kems.net [80.184.31.1] 3 7 ms 7 ms 8 ms 168.187.0.226 4 7 ms 8 ms 9 ms 168.187.0.125 5 180 ms 187 ms 188 ms if-11-2.core1.RSD-Riyad.as6453.net [116.0.78.89] 6 209 ms 222 ms 204 ms 195.219.167.57 7 541 ms 536 ms 540 ms 195.219.167.42 8 553 ms 552 ms 538 ms Vlan1102.icore1.PVU-Paris.as6453.net [195.219.24 1.109] 9 547 ms 543 ms 542 ms xe-9-1-0.edge4.paris1.level3.net [4.68.110.213] 10 540 ms 523 ms 531 ms ae-33-51.ebr1.Paris1.Level3.net [4.69.139.193] 11 755 ms 761 ms 695 ms ae-45-45.ebr1.London1.Level3.net [4.69.143.101] 12 271 ms 263 ms 400 ms ae-11-51.car1.London1.Level3.net [4.69.139.66] 13 701 ms 730 ms 742 ms 195.50.118.210 14 659 ms 641 ms 660 ms 209.85.255.76 15 280 ms 283 ms 292 ms 209.85.251.190 16 308 ms 293 ms 296 ms 72.14.232.239 17 679 ms 700 ms 721 ms 64.233.174.18 18 268 ms 281 ms 269 ms lm-in-f104.1e100.net [66.102.9.104] Trace complete. C:\Documents and Settings\Administrator> This was taken at 10:00am Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp. C:\Documents and Settings\Administrator>ping google.com Pinging google.com [66.102.9.106] with 32 bytes of data: Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=111ms TTL=49 Reply from 66.102.9.106: bytes=32 time=112ms TTL=49 Reply from 66.102.9.106: bytes=32 time=120ms TTL=49 Ping statistics for 66.102.9.106: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 110ms, Maximum = 120ms, Average = 113ms C:\Documents and Settings\Administrator>ping google.com /t Pinging google.com [66.102.9.106] with 32 bytes of data: Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=111ms TTL=49 Reply from 66.102.9.106: bytes=32 time=111ms TTL=49 Reply from 66.102.9.106: bytes=32 time=112ms TTL=49 Reply from 66.102.9.106: bytes=32 time=112ms TTL=49 Reply from 66.102.9.106: bytes=32 time=116ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=112ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=115ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=113ms TTL=49 Reply from 66.102.9.106: bytes=32 time=115ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Ping statistics for 66.102.9.106: Packets: Sent = 32, Received = 32, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 109ms, Maximum = 135ms, Average = 112ms Control-C ^C C:\Documents and Settings\Administrator>tracert google.com Tracing route to google.com [66.102.9.104] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 192.168.0.1 2 6 ms 6 ms 6 ms 80-184-31-1.adsl.kems.net [80.184.31.1] 3 8 ms 7 ms 6 ms 168.187.0.226 4 6 ms 7 ms 7 ms 168.187.0.125 5 20 ms 20 ms 18 ms if-11-2.core1.RSD-Riyad.as6453.net [116.0.78.89] 6 171 ms 205 ms 215 ms 195.219.167.57 7 191 ms 215 ms 226 ms 195.219.167.42 8 * 103 ms 94 ms Vlan1102.icore1.PVU-Paris.as6453.net [195.219.24 1.109] 9 94 ms 95 ms 97 ms xe-9-1-0.edge4.paris1.level3.net [4.68.110.213] 10 94 ms 94 ms 94 ms ae-33-51.ebr1.Paris1.Level3.net [4.69.139.193] 11 101 ms 101 ms 101 ms ae-48-48.ebr1.London1.Level3.net [4.69.143.113] 12 102 ms 102 ms 101 ms ae-11-51.car1.London1.Level3.net [4.69.139.66] 13 103 ms 102 ms 103 ms 195.50.118.210 14 137 ms 103 ms 100 ms 209.85.255.76 15 130 ms 124 ms 124 ms 209.85.251.190 16 114 ms 116 ms 116 ms 72.14.232.239 17 135 ms 113 ms 126 ms 64.233.174.18 18 126 ms 125 ms 127 ms lm-in-f104.1e100.net [66.102.9.104] Trace complete. C:\Documents and Settings\Administrator>

    Read the article

  • Please bear with me, can someone analyze this trace route please

    - by Abdulla
    Hello, my name is Abdulla and I'm from Kuwait. Sorry for my question as I know its not technically challenging. I'm facing some problems with my internet connection while gaming, I have DSL 2mb connection. My main problem is latency, in the morning its good but after that its gets really bad. My internet provider says there's nothing wrong and that everything is working perfectly. I tried to explain to them the latency issue but they say that as long as I'm getting the download speed there isn't anything I can do about it. I only want to know if this is true and that the company can't do anything before I change my internet provider, as I feel that the guys at the contact center might getting back to me without asking tech support. Below are 2 traces I made, one in the morning and the other in the afternoon: This was taken around 17:00 Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp. C:\Documents and Settings\Administrator>ping google.com Pinging google.com [66.102.9.104] with 32 bytes of data: Reply from 66.102.9.104: bytes=32 time=387ms TTL=49 Reply from 66.102.9.104: bytes=32 time=388ms TTL=49 Reply from 66.102.9.104: bytes=32 time=375ms TTL=49 Reply from 66.102.9.104: bytes=32 time=375ms TTL=49 Ping statistics for 66.102.9.104: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 375ms, Maximum = 388ms, Average = 381ms C:\Documents and Settings\Administrator>ping google.com /t Pinging google.com [66.102.9.104] with 32 bytes of data: Reply from 66.102.9.104: bytes=32 time=376ms TTL=49 Reply from 66.102.9.104: bytes=32 time=382ms TTL=49 Reply from 66.102.9.104: bytes=32 time=371ms TTL=49 Reply from 66.102.9.104: bytes=32 time=378ms TTL=49 Reply from 66.102.9.104: bytes=32 time=374ms TTL=49 Reply from 66.102.9.104: bytes=32 time=371ms TTL=49 Reply from 66.102.9.104: bytes=32 time=365ms TTL=49 Reply from 66.102.9.104: bytes=32 time=366ms TTL=49 Reply from 66.102.9.104: bytes=32 time=353ms TTL=49 Reply from 66.102.9.104: bytes=32 time=331ms TTL=49 Reply from 66.102.9.104: bytes=32 time=333ms TTL=49 Reply from 66.102.9.104: bytes=32 time=348ms TTL=49 Reply from 66.102.9.104: bytes=32 time=365ms TTL=49 Reply from 66.102.9.104: bytes=32 time=346ms TTL=49 Reply from 66.102.9.104: bytes=32 time=335ms TTL=49 Reply from 66.102.9.104: bytes=32 time=340ms TTL=49 Reply from 66.102.9.104: bytes=32 time=344ms TTL=49 Reply from 66.102.9.104: bytes=32 time=333ms TTL=49 Reply from 66.102.9.104: bytes=32 time=328ms TTL=49 Reply from 66.102.9.104: bytes=32 time=332ms TTL=49 Reply from 66.102.9.104: bytes=32 time=326ms TTL=49 Reply from 66.102.9.104: bytes=32 time=333ms TTL=49 Reply from 66.102.9.104: bytes=32 time=325ms TTL=49 Reply from 66.102.9.104: bytes=32 time=333ms TTL=49 Reply from 66.102.9.104: bytes=32 time=338ms TTL=49 Reply from 66.102.9.104: bytes=32 time=341ms TTL=49 Ping statistics for 66.102.9.104: Packets: Sent = 26, Received = 26, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 325ms, Maximum = 382ms, Average = 348ms Control-C ^C C:\Documents and Settings\Administrator>travert google.com 'travert' is not recognized as an internal or external command, operable program or batch file. C:\Documents and Settings\Administrator>tracert google.com Tracing route to google.com [66.102.9.104] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 192.168.0.1 2 6 ms 6 ms 6 ms 80-184-31-1.adsl.kems.net [80.184.31.1] 3 7 ms 7 ms 8 ms 168.187.0.226 4 7 ms 8 ms 9 ms 168.187.0.125 5 180 ms 187 ms 188 ms if-11-2.core1.RSD-Riyad.as6453.net [116.0.78.89] 6 209 ms 222 ms 204 ms 195.219.167.57 7 541 ms 536 ms 540 ms 195.219.167.42 8 553 ms 552 ms 538 ms Vlan1102.icore1.PVU-Paris.as6453.net [195.219.24 1.109] 9 547 ms 543 ms 542 ms xe-9-1-0.edge4.paris1.level3.net [4.68.110.213] 10 540 ms 523 ms 531 ms ae-33-51.ebr1.Paris1.Level3.net [4.69.139.193] 11 755 ms 761 ms 695 ms ae-45-45.ebr1.London1.Level3.net [4.69.143.101] 12 271 ms 263 ms 400 ms ae-11-51.car1.London1.Level3.net [4.69.139.66] 13 701 ms 730 ms 742 ms 195.50.118.210 14 659 ms 641 ms 660 ms 209.85.255.76 15 280 ms 283 ms 292 ms 209.85.251.190 16 308 ms 293 ms 296 ms 72.14.232.239 17 679 ms 700 ms 721 ms 64.233.174.18 18 268 ms 281 ms 269 ms lm-in-f104.1e100.net [66.102.9.104] Trace complete. C:\Documents and Settings\Administrator> This was taken at 10:00am Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp. C:\Documents and Settings\Administrator>ping google.com Pinging google.com [66.102.9.106] with 32 bytes of data: Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=111ms TTL=49 Reply from 66.102.9.106: bytes=32 time=112ms TTL=49 Reply from 66.102.9.106: bytes=32 time=120ms TTL=49 Ping statistics for 66.102.9.106: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 110ms, Maximum = 120ms, Average = 113ms C:\Documents and Settings\Administrator>ping google.com /t Pinging google.com [66.102.9.106] with 32 bytes of data: Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=111ms TTL=49 Reply from 66.102.9.106: bytes=32 time=111ms TTL=49 Reply from 66.102.9.106: bytes=32 time=112ms TTL=49 Reply from 66.102.9.106: bytes=32 time=112ms TTL=49 Reply from 66.102.9.106: bytes=32 time=116ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=112ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=115ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=113ms TTL=49 Reply from 66.102.9.106: bytes=32 time=115ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Ping statistics for 66.102.9.106: Packets: Sent = 32, Received = 32, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 109ms, Maximum = 135ms, Average = 112ms Control-C ^C C:\Documents and Settings\Administrator>tracert google.com Tracing route to google.com [66.102.9.104] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 192.168.0.1 2 6 ms 6 ms 6 ms 80-184-31-1.adsl.kems.net [80.184.31.1] 3 8 ms 7 ms 6 ms 168.187.0.226 4 6 ms 7 ms 7 ms 168.187.0.125 5 20 ms 20 ms 18 ms if-11-2.core1.RSD-Riyad.as6453.net [116.0.78.89] 6 171 ms 205 ms 215 ms 195.219.167.57 7 191 ms 215 ms 226 ms 195.219.167.42 8 * 103 ms 94 ms Vlan1102.icore1.PVU-Paris.as6453.net [195.219.24 1.109] 9 94 ms 95 ms 97 ms xe-9-1-0.edge4.paris1.level3.net [4.68.110.213] 10 94 ms 94 ms 94 ms ae-33-51.ebr1.Paris1.Level3.net [4.69.139.193] 11 101 ms 101 ms 101 ms ae-48-48.ebr1.London1.Level3.net [4.69.143.113] 12 102 ms 102 ms 101 ms ae-11-51.car1.London1.Level3.net [4.69.139.66] 13 103 ms 102 ms 103 ms 195.50.118.210 14 137 ms 103 ms 100 ms 209.85.255.76 15 130 ms 124 ms 124 ms 209.85.251.190 16 114 ms 116 ms 116 ms 72.14.232.239 17 135 ms 113 ms 126 ms 64.233.174.18 18 126 ms 125 ms 127 ms lm-in-f104.1e100.net [66.102.9.104] Trace complete. C:\Documents and Settings\Administrator>

    Read the article

  • Very slow remote page load performance in QtWebKit (Windows)

    - by Gil
    I get very slow load times on QtWebKit on Windows 7, through ADSL. I am using the Qt Demo Browser, on a Core2 Quad, 64 bit Windows 7, 4GB ram, 2gb processor. through a VPN. Simplest example: google search page takes ~18 seconds to load, compared to 2.5 on Chrome (cash cleared). On larger pages, with scripts etc. it is worse. I tried Qt 4.6 and also the Qt 4.7 beta, but don't see any difference. I see the same results with Arora browser. Are there any settings, or patches that can be applied to fix this? Thanks

    Read the article

  • After a period of time, nslookup still works, but pinging, and an auto-refeshed website, fails.

    - by Mark Hurd
    Contrary to this question this is for a dotted name (gw.localnet.au), and it doesn't happen straight away. Only after some period of time (quite a long time, possibly days). In fact this is for my ADSL router and its internal IP address which I have named within the router itself and in my Windows Server 2003 Domain Controller DNS Service. Specifically, localnet.au is a Active-Directory-backed primary domain. In fact, an ipconfig /flushdns may fix the problem, but only after a while (about the time it took me to type in this question :-) ). That doesn't explain the root cause though...

    Read the article

  • Firewall configuration. (Windows server 2008)

    - by Jon
    Hello. I'm having a little problem with configuring the firewall on my server. I only want a specific range of IPs to be able to access specific ports. For example, I'm having alot of password attempts to some of my servers, so I want to make it more safe by only allowing incoming connections from a specific range of domain. Example: My IP is usually adsl-324-4.somecompany.com so I want to allow *.somecpompany.com to connect, as my IP is dynamic. That would get rid of alot of attempts to hack into my servers. But I have no idea how to mask a domain like that for the firewall. How could I for example allow all incoming connections from *.is? Thanks.

    Read the article

  • Ubuntu 10.10 Network Issues (wireless as well as wired)

    - by user9054
    down vote favorite Hi Friends, I have got this issue with Ubuntu 10.10 . I have been with ubuntu 8.04 and then decided to try out ubuntu 10.10 . I booted with a LiveCD and was able to configure the wireless network painlessly using the livecd . so happily i installed ubuntu 10.10 . As soon as ubuntu came up it detected the wireless network and i was able to assign a static IP to eth1 (i dont use DHCP option on my ADSL router) and enter a wap key and use pppoeconf to configure the dialer . The net was on and i was able to surf the net . all hunky dory so far . However on the next boot the fun started . It did not detect the wireless network . I could not see the network manager icon in the systray . I used ifconfig and saw that the entry for eth1 was missing .I used ifup eth1 and it said that eth1 was already up . Then i installed wifi-radar . Wifi-Radar detected the wireless network . I configured wifi-radar for the detected wireless network , set the wap driver as wext and used the manual IP settings . However on clicking connect wifi-radar started looking for a DHCP IP , needless to say it failed . For the love of god i cannot understand why wifi-radar is using DHCP when i have specified manual settings . Next i decided to use the wired network to surf the net looking for a solution . So i plugged in the network cable from my modem , it detected the plugged in connection , i configured eth0 , used pppoeconf and connected to the net . Then i foolishly decided to reboot my PC . And wonders of wonders , the same problem appeared . I cannot see eth0 in my ifconfig anymore . i used pon to start the dsl-provider connection and it said something about network error or something . Now my ifconfig shows only lo , both eth0 and eth1 have disappeared .Can anybody help me on this ? Is it a problem with ipv6 , if so how do you disable ipv6 on ubuntu 10.10 ? OR is this is a known issue with ubuntu 10.10 ? .PS : 1) i tried linux mint 10 and had the same issue . on rebooting wireless network was not getting detected . 2) i have made myself the administrator so that there is no issue of rights or anything. Any help is appreciated.

    Read the article

  • Networking works on Live CD but not after installation.

    - by user9054
    Hi Friends, I have got this issue with Ubuntu 10.10. I have been with ubuntu 8.04 and then decided to try out ubuntu 10.10 . I booted with a LiveCD and was able to configure the wireless network painlessly using the livecd, so happily I installed ubuntu 10.10. As soon as ubuntu came up it detected the wireless network and i was able to assign a static IP to eth1 (i dont use DHCP option on my ADSL router) and enter a wap key and use pppoeconf to configure the dialer. The net was on and i was able to surf the net. All hunky dory so far. However on the next boot the fun started . It did not detect the wireless network. I could not see the network manager icon in the systray. I used ifconfig and saw that the entry for eth1 was missing. I used ifup eth1 and it said that eth1 was already up. Then i installed wifi-radar. Wifi-Radar detected the wireless network. I configured wifi-radar for the detected wireless network , set the wap driver as wext and used the manual IP settings. However on clicking connect wifi-radar started looking for a DHCP IP. I cannot understand why wifi-radar is using DHCP when I have specified manual settings. Then I decided to use the wired network to surf the net looking for a solution. So I plugged in the network cable from my modem , configured eth0 , used pppoeconf and connected the net. Then I foolishly decided to reboot my PC. And wonders of wonders , the same problem appeared. I cannot see eth0 in my ifconfig anymore. I used pon and it said something about network error or something. Now my ifconfig shows only lo .Can anybody help me on this. PS : 1) I tried linux mint 10 and had the same issue . on rebooting wireless network was not getting detected. 2) I have made myself the administrator so that there is no issue of rights or anything.

    Read the article

  • Test your internet connection - Emtel Mobile Internet

    After yesterday's report on Emtel Fixed Broadband (I'm still wondering where the 'fixed' part is), I did the same tests on Emtel Mobile Internet. For this I'm using the Huawei E169G HSDPA USB stick, connected to the same machine. Actually, this is my fail-safe internet connection and the system automatically switches between them if a problem, let's say timeout, etc. has been detected on the main line. For better comparison I used exactly the same servers on Speedtest.net. The results Following are the results of Rose Hill (hosted by Emtel) and respectively Frankfurt, Germany (hosted by Vodafone DE): Speedtest.net result of 31.05.2013 between Flic en Flac and Rose Hill, Mauritius (Emtel - Mobile Internet) Speedtest.net result of 31.05.2013 between Flic en Flac and Frankfurt, Germany (Emtel - Mobile Internet) As you might easily see, there is a big difference in speed between national and international connections. More interestingly are the results related to the download and upload ratio. I'm not sure whether connections over Emtel Mobile Internet are asymmetric or symmetric like the Fixed Broadband. Might be interesting to find out. The first test result actually might give us a clue that the connection could be asymmetric with a ratio of 3:1 but again I'm not sure. I'll find out and post an update on this. It depends on network coverage Later today I was on tour with my tablet, a Samsung Galaxy Tab 10.1 (model GT-P7500) running on Android 4.0.4 (Ice Cream Sandwich), and did some more tests using the Speedtest.net app. The results are actually as expected and in areas with better network coverage you will get better results after all. At least, as long as you stay inside the national networks. For anything abroad, it doesn't really matter. But see for yourselves: Speedtest.net result of 31.05.2013 between Cascavelle and servers in Rose Hill, Mauritius (Emtel - Mobile Internet), Port Louis, Mauritius and Kuala Lumpur, Malaysia It's rather shocking and frustrating to see how the speed on international destinations goes down. And the full capability of the tablet's integrated modem (HSDPA: 21 Mbps; HSUPA: 5.76 Mbps) isn't used, too. I guess, this demands more tests in other areas of the island, like Ebene, Pailles or Port Louis. I'll keep you updated... The question remains: Alternatives? After the publication of the test results on Fixed Broadband I had some exchange with others on Facebook. Sadly, it seems that there are really no alternatives to what Emtel is offering at the moment. There are the various internet packages by Mauritius Telecom feat. Orange, like ADSL, MyT and Mobile Internet, and there is Bharat Telecom with their Bees offer which is currently limited to Ebene and parts of Quatre Bornes.

    Read the article

  • Wired and Wireless Network Issues with PPPoE

    - by user9054
    down vote favorite Hi Friends, I have got this issue with Ubuntu 10.10. I have been with ubuntu 8.04 and then decided to try out ubuntu 10.10 . I booted with a LiveCD and was able to configure the wireless network painlessly using the livecd. So happily i installed ubuntu 10.10. As soon as ubuntu came up it detected the wireless network and i was able to assign a static IP to eth1 (i dont use DHCP option on my ADSL router) and enter a wap key and use pppoeconf to configure the dialer. The net was on and i was able to surf the net. All hunky dory so far. However on the next boot the fun started. It did not detect the wireless network. I could not see the network manager icon in the systray. I used ifconfig and saw that the entry for eth1 was missing. I used ifup eth1 and it said that eth1 was already up . Then i installed wifi-radar. Wifi-Radar detected the wireless network. I configured wifi-radar for the detected wireless network , set the wap driver as wext and used the manual IP settings. However on clicking connect wifi-radar started looking for a DHCP IP , needless to say it failed. For the love of god i cannot understand why wifi-radar is using DHCP when i have specified manual settings . Next i decided to use the wired network to surf the net looking for a solution . So i plugged in the network cable from my modem , it detected the plugged in connection , i configured eth0 , used pppoeconf and connected to the net. Then i foolishly decided to reboot my PC. And wonders of wonders , the same problem appeared. I cannot see eth0 in my ifconfig anymore. I used pon to start the dsl-provider connection and it said something about network error or something . Now my ifconfig shows only lo , both eth0 and eth1 have disappeared. Can anybody help me on this ? Is it a problem with ipv6 , if so how do you disable ipv6 on ubuntu 10.10 ? OR is this is a known issue with ubuntu 10.10 ? PS : 1) i tried linux mint 10 and had the same issue. On rebooting wireless network was not getting detected . 2) i have made myself the administrator so that there is no issue of rights or anything. Any help is appreciated.

    Read the article

< Previous Page | 6 7 8 9 10 11 12 13  | Next Page >