Search Results

Search found 1077 results on 44 pages for 'bill moreland'.

Page 10/44 | < Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >

  • PASS: FY10 Actuals Posted

    - by Bill Graziano
    Earlier this year we published preliminary fiscal year 2010 financials to the Governance page on the PASS web site.  Please remember that FY10 runs from July 1st, 2009 through June 30th, 2010 and includes the November 2009 Summit.  We do our fiscal year this way so that the Summit falls earlier in the fiscal year.  The financials we had posted were P&L numbers at the portfolio level.  Prior to this we had posted our detailed budget but only posted the auditors report at the end of each year.  Today we updated our published financials to include: Pre-audit actuals from FY10 at the same level as our budget.  The document has both actuals and budget for FY10 side by side.  This is over 20 pages of detailed financial information covering hundreds of line-items. A letter describing key differences between our budget and actuals.  I walked through each line item where the difference was greater than $25,000 and explained what happened and why. We updated the financial graph going back to 2003 to include FY10. This update should “close the loop” on our financials.  You can now start with the published budget and compare it to the finished financials at the same level of detail.  We also plan to publish the auditor’s report when that is completed -- as we do every year. Overall I’m very happy with how FY10 turned out.  Keep in mind that this was the November 2009 Summit so we were still facing economic challenges.  With all that we were roughly break-even showing a $15,000 profit on $3.9 million of revenue.  I didn’t find anything shocking in reviewing our actual vs. budget but there were a few things that needed explanation.  You can see those in the letter on the governance page. Please keep in mind that these are the actuals from our operating financials.  The auditor may have us make adjustments for depreciation or other financial transactions.  We may also account for certain transactions differently for tax purposes than we do for financial reporting purposes.  I feel these financial statements give you the clearest picture of how our organization spends its money. We were late publishing these this year.  We were working through some tax issues and that delayed our ability to file our final tax forms which delayed this process.  In hindsight I should have published these documents as soon as we had them and not waited for the tax issues.  We’ll do this better in the future. And on a final note, you don’t need to login to view these documents.  If you have any questions you can post them here.  If we get more than a few questions we may see about creating some forums for financial issues on the PASS web site.

    Read the article

  • TraceTune supports uploading Zip files

    - by Bill Graziano
    I’ve been using the online version of ClearTrace more and more lately.  When I get to a new client it’s just much easier to upload a trace file rather than install ClearTrace. That means I’ve finally been adding more features to it.  The two latest features are around ease of use. You can now upload a ZIP file that contains a trace file.  Trace files are already somewhat compressed.  Putting it in a ZIP file further compresses it by a factor of 8X or 9X in my testing. That means you can start with a 100MB trace and end up with a 10Mb-12MB ZIP file to upload.  I’m consistently able to get over 150,000 events in a 100MB ZIP file.  That gives me a pretty good look at a system. The second part of this is that files are now processed asynchronously.  After you upload a file you’ll be taken to a processing page that updates every few seconds with the number of rows processed.  It generally takes under a minute to process a 100MB trace file but I *hated* staring at a blank screen. Give TraceTune a try.  It’s getting easier to use every day.

    Read the article

  • ClearTrace for SQL Server 2012

    - by Bill Graziano
    I’ve updated the beta for ClearTrace that support SQL Server 2012.  This requires SQL Server 2012 to be installed on the computer where ClearTrace is running.  It will read traces from SQL Server 2008 R2, SQL Server 2008 and SQL Server 2005. It includes some minor improvements in performance and handling large SQL statements. It should also give better errors. If you do find any of those errors, please report them in the support forum.

    Read the article

  • SQL Saturday 300 BBQ Crawl

    - by Bill Graziano
    SQL Saturday #300 is coming up right here in Kansas City on September 13th, 2014.  This is our fifth SQL Saturday which means it's the fifth anniversary of our now infamous BBQ Crawl.  We get together on Friday afternoon before the event and visit a few local joints.  We've done nice places and we've done dives.  We haven’t picked the venues yet but I promise you’ll be well fed! And if you’re thinking about the BBQ crawl you should think about submitting a session.  Our call for speakers closes Tuesday, July 15th so you just have time!  If you’re going to be at the event, contact me and I’ll get you added to the list.

    Read the article

  • Gnome 3 freezes when switching workspaces

    - by Bill Cheatham
    I have found an odd problem with Gnome 3 on Ubuntu recently. Under certain circumstances, when switching between two workspaces the whole desktop and user interface will 'freeze' for anything up to 2 minutes; during this time I cannot click anything or interact using the keyboard. Often, the screen will show a 'half-completed' animation of the workspace swapper. This is on Ubuntu 12.04.1 running on a 2-year old Macbook Pro, and it only seems to occur when using an external monitor. This does not seem to be a processor or memory issue, and does not occur every time I switch workspaces. Is this a known problem? What can I do in the short or long term to fix it?

    Read the article

  • App Engine charges in November 2011 [closed]

    - by broiyan
    I had a billing enabled test application on Google App Engine left over from early 2011. I have not received a bill in many months because I have not been hitting the URL and according to the activity monitor, nobody has. Then unexpectedly in November 2011, I received 2 bills in as many weeks for quite minimal amounts. Checking the monitor it looks like nobody has been hitting the URL and according to the SQL-like search, there is nothing in the Datastore. I know that GAE has left the "preview" in recent weeks but I am not sure how that would affect what is essentially a dormant application with no Datastore objects. Has GAE started charging for completely unused applications in recent weeks? Edit: Most of my applications were already disabled and I have just disabled the only one that was enabled but unused the past several months. If I get another bill next week that should be informative.

    Read the article

  • Android 2.3 (Gingerbread) officially released

    - by Bill Osuch
    Google today officially released their latest version of the Android OS - 2.3, Gingerbread. It won't hit a phone (the Nexus S) until 12/16, but developers can start working with it today. Some of the new features include: Enhancements for game development Rich multimedia New forms of communication Simplified debug builds Integrated ProGuard support HierarchyViewer improvements Preview of new UI Builder See the complete details at http://developer.android.com/sdk/android-2.3.html

    Read the article

  • Install Ubuntu 12.04 on Drive "D"?

    - by Bill Jones
    I have a Dell Inspiron 531S that originally came loaded with Windows Vista. A couple years ago I purchased a copy of Windows 7, formatted the hard drive and installed the updated operating system. In the process I formatted the 10 GB recovery drive partition on drive D as it was no longer needed for Windows Vista. I would really like to install Ubuntu 12.04 LTS alongside Windows 7 using the empty 10 GB drive D:. I have two questions. (1) Can Ubuntu be installed on a separate partition, a drive removed from the boot sector on drive C:? (2) If so would Grub be installed in the boot sector and properly select Windows 7 on drive C: or Ubuntu 12.04 on drive D?

    Read the article

  • ClearTrace Supports SQL Server 2008 R2

    - by Bill Graziano
    It was a long time coming and I hope worth the wait.  If you have SQL Server 2008 R2 installed on the same box as ClearTrace and you download the latest ClearTrace build (36) you’ll be able to read SQL Server 2008 R2 traces.  I also fixed a bug handling very, very large SQL statements.  I encountered an INSERT statement that was 12MB in size.  It was storing XML in a database.  ClearTrace uses regular expressions to clean up the SQL it finds.  Running two dozen regular expressions over this 12MB string caused the application to crash.  In this build I’m just skipping any statement over 1MB.  I’ll do something a little nicer in the next build. (And if you don’t want to download ClearTrace you can test the online version at www.TraceTune.com)

    Read the article

  • Speaking in Omaha: December 7, 2011

    - by Bill Graziano
    I’m presenting in Omaha on Writing Faster SQL at 6PM on December 7th.  You can find meeting details on the Omaha SQL Server User Group page. The meeting location requires an RSVP so building security has a list of attendees. The presentation is a series of suggestions on improving performance.  It ranges from simple things like comparing indexed columns to scalar values up to tips for reducing query compiles and asynchronous processing patterns.  Nearly all of these come from specific issues I’ve encountered working on poorly performing SQL Servers.

    Read the article

  • What does it mean if a job requires a "Bachelor's degree in Computer Science or related field"?

    - by Bill
    Specifically, what is meant by "related field"? I'm in the process of pursuing an IT Infrastructure B.A.S. from the U of M (Twin Cities), but have been playing around with the idea of just doing the CSCI B.S. I don't want to be a hardcore programmer, but would having the CSCI degree, instead of the ITI degree, open more doors to whatever profession within the IT world I end up setting my sights on?

    Read the article

  • An online version of ClearTrace

    - by Bill Graziano
    When I visit clients for the first time and conduct a performance review I introduce them to ClearTrace. It’s still the best way I know to identify exactly which queries are consuming the most resources.  The downside is that it needs to be downloaded and create a database to store the results.  I finally decided it would be easier if I could just upload a trace immediately. You can find the online version of ClearTrace at TraceTune.com.  It provides a simple way to upload a trace file and see exactly which stored procedures or SQL statements consume the most CPU and disk.   This is still a work in progress as I try to determine exactly which features from ClearTrace are important.  I’ve also limited the file upload to 10MB in this beta release.  That might not sound like much but I get over 20,000 events using this stored procedure to generate the trace. If you’re looking for something to do on a Friday, I’d suggest a little performance tuning.  Generating 10MB of trace data doesn’t take long at all and in a short time you’ll see exactly which SQL statements you need to tune first.

    Read the article

  • Windows 7 and 11.10 side by side from scratch what am I doing wrong?

    - by Bill.Caffery
    I have tried everything I can think of at this point and I'm at a total loss. I have a 2TB drive I want to install Windows 7 and 11.10 (both are 64 bit) side by side, but once I install Windows it must need gpt to work or something because no matter how many times I've removed it, it always returns. If I use gdisk and set the disk as mbr, Windows won't load. Now this last time I ran gdisk and tried to boot into Windows before I installed Ubuntu all the way and ended up at a grub rescue prompt. Any help please? Also let me say I have been searching and reading for days and have tried everything I can find to make this work so this isn't a one time event, it's continual.

    Read the article

  • Another Update to SQL Server Configuration Scripting Utility

    - by Bill Graziano
    I’ve been gradually adding features to my utility that scripts the configuration of a SQL Server.  Since my last post I’ve added the following features: Skip any encrypted object in a database Script alerts, alert notifications and operators Script audits Always script model, master and msdb to capture any user-defined objects in those databases Logins are now scripted so that everything for a login is grouped together. There’s a second section in the logins that handles default databases.  In many cases a login’s default database is a mirror target and can’t be set.  This is now handled gracefully.  It also includes a separate section for all default databases so those can be quickly set in the event of a disaster. Script credentials Script proxy accounts Script database mail My goal is still to get everything outside a database scripted.  This release is enough that I can keep my mirror target servers in sync with their principals.

    Read the article

  • transfer Thunderbird (17) Profile on Win7 to Ubuntu 12.04

    - by William Curran
    I want to transfer Thunderbird Profile on Win7 to thunderbird (17) Ubuntu 12.04. I already copied the profile folder from Windows to Ubuntu and modified progile.ini on the ubuntu machine to include [Profile] Name=Bill IsRelative=1 Path=(the name of the transfered profile folder) I think the problem is that the Win. TB profile content (files and folder structure) look VERY different that the that of the unbuntu TB profile's that was created on installation. The Ubuntu install is new where as the Win TB has undergone many updates. Seems the system for profile storage has changed drastically. I tried to start TB in safe mode but could't get the path correct to start TB in the terminal with the -safe-mode switch. What can I do? Bill

    Read the article

  • TraceTune shows Reads graphically

    - by Bill Graziano
    TraceTune now shows a graphical view of logical reads for each SQL statement in a trace file.  The width of the colored bar in the screen capture below is the percentage of logical reads for that statement.  The absolute number of reads is shown to the right. Any statement that has a user entered comment is shown in bold.  If you hover over the statement it will show the most recent comment for that statement.

    Read the article

  • SQL Server Configuration Scripting Utility Release 9

    - by Bill Graziano
    There’s another update to my little utility to script a SQL Server’s configuration.  I use this for two purposes.  First, I use it to keep my database mirroring servers up to date.  Second, I capture the output in a version control system and keep that for historical reference. In release 3.0.9 I made the following changes: Rewrote the encrypted trigger scripting.  It will now list the encrypted triggers in a comment in the table script but can’t actually script them. It now scripts any server event notifications. You can script a single database using the /scriptdb flag.  Please note that it will also script the instance and system databases when it does this. It will script any user-defined endpoints.  This will capture your mirroring endpoints and more importantly any service broker endpoints. It will gracefully skip database mail on the Express Edition. It still doesn’t support SQL Server 2012.  I think that’s the next feature to add though.

    Read the article

  • How do I make a dialog box? [on hold]

    - by bill
    By dialog box I mean when player talks to someone, a box shows up with text on it. I haven't found much about this topic online, so I created a basic dialog box: //in dialog box i have only two methods public void createBox(int x, int y, int width, int height, String txt) { this.x = x; this.y = y; this.width = width; this.height = height; this.txt = txt; } //draw dialog box public void draw(Graphics2D g) { if (txt != null) { g.setColor(Color.red); g.drawRect(x,y,width,height); g.setColor(Color.black); g.fillRect(x, y, width, height); g.setColor(Color.white); g.drawString(txt, x + 10, y + 10); } } I wanted to now can I make this better?

    Read the article

  • What version(s) of Android should I be targeting?

    - by Bill Osuch
    If you're wondering about what screen sizes and flavors of Android are currently out in the wild, the Android Developers site has a handy little chart of both (each image below is hyperlinked to the page): So, as far as platforms go, there aren't many people still out there running less than 2.X... and you'd probably be safe not worrying about Small or Low Density screens. I'd be curious to know if any of the other app stores (Amazon, Archos, etc.) offer similar stats...

    Read the article

  • Writing files to an Airport Extreme using afp

    - by Bill Oldroyd
    Using Nautilus I can connect from Ubuntu 12.04 (64-bit) to my Apple Airport Extreme using user & password without a problem. I can read, browse folders and delete files. However I cannot write files, the file is created, but the contents of the file are not transferred. The transfer fails with the error message "kFPMiscErr" which I think means that "authentication has already been established" ?. I have tried the command line tools for access using AFP but these do not work either. Is there a solution to this problem ?

    Read the article

  • How to tell if Microsoft Works is 32 or 64 bit? Please Help!

    - by Bill Campbell
    Hi, I am trying to convert one of our apps to run on Win7 64 bit from XP 32 bit. One of the things that it uses is Excel to import files. It's a little complicated since it was using Microsoft.Jet.OLEDB.4.0 (Excel). I found Office 14 (2010) has a 64bit version I can download. I downloaded Office 2010 Beta but it didn't seem to install Microsoft.ACE.OLEDB.14.0. I found that I could download 2010 Office System Driver Beta: Data Connectivity Components which has the ACE.OLEDB.14 in it but when I try to install it, the installed tells me "You cannot install the 64-bit version of Access Database engine for Microsoft Office 2010 because you currently have 32-bit Office products installed". How do I determine what 32bit office products this is reffering to? My Dell came with Microsoft Works installed. I don't know if this is 32 or 64 bit. Is there anyway to tell? I don't want to uninstall this if it's not the problem and I'm not sure what else might be the problem. Any help would be appreciated! thanks, Bill

    Read the article

  • WPF TextBlock Binding to DependencyProperty

    - by Bill Campbell
    Hi, I have what I believe to be about one of the most simple cases of attempting to bind a view to a dependencyproperty in the view model. It seems that the initial changes are reflected in the view but other changes to the DP do not update the view's TextBlock. I'm probably just missing something simple but I just can't see what it is. Please take a look... My XAML has a status bar on the bottom of the window. I want to bind to the DP "VRAStatus". <StatusBar x:Name="sbar" Grid.Column="0" Grid.Row="2" Grid.ColumnSpan="2" VerticalAlignment="Bottom" Background="LightBlue" Opacity="0.4" DockPanel.Dock="Bottom" > <StatusBarItem> <TextBlock x:Name="statusBar" Text="{Binding VRAStatus}" /> </StatusBarItem> <StatusBarItem> <Separator Style="{StaticResource StatusBarSeparatorStyle}"/> </StatusBarItem> </StatusBar> My viewmodel has the DP defined: public string VRAStatus { get { return (string)GetValue(VRAStatusProperty); } set { SetValue(VRAStatusProperty, value); } } // Using a DependencyProperty as the backing store for VRAStatus. public static readonly DependencyProperty VRAStatusProperty = DependencyProperty.Register("VRAStatus", typeof(string), typeof(PenskeRouteAssistViewModel),new PropertyMetadata(string.Empty)); Then, in my code I set the DP: VRAStatus = "Test Message..."; Is there something obvious here that I am missing? In my constructor for the viewmodel I set the DP like this: VRAStatus = "Ready"; I never get the Test Message to display. Please Help. thanks in advance! Bill

    Read the article

  • Operation is not valid due to the current state of the object?

    - by Bill
    I am programming in C#; the code was working about a week ago, however it throws an exception and I don't understand at all what could be wrong with it. Var root = new CalculationNode(); -> Throw exception. In the call stack thats the only thing listed, I've been told that it could be that I need a clean build, but I am open to any ideas or suggestions. Thanks, -Bill Update: Exception's Detail System.InvalidOperationException was unhandled by user code Message=Operation is not valid due to the current state of the object. Source=Calculator.Logic StackTrace: at ~.Calculator.Logic.MyBaseExpressionParser.Parse(String expression) in ~\Source\Calculator.Logic\MyBaseExpressionParser.cs:line 44 at ~.Calculator.Logic.Tests.MyBaseCalculatorServiceTests.BasicMathDivision() in ~\Projects\Tests\Calculator.Logic.Tests\MyBaseCalculatorServiceTests.cs:line 60 InnerException: CalculationNode's code: public sealed calss CalculationNode { public CalculationNode() { this.Left = null; this.Right = null; this.Element = new CalculationElement(); } public CalculationNode Left {get;set;} public CalculationNode Right {get;set;} public CalculationElement Element {get; set;} } CalculationElement's code: public sealed class CalculationElement { public CalculationElement() { Value = string.Empty; IsOperator = false; } public string Value {get; set} public bool IsOperator {get; set} }

    Read the article

  • Best way to associate data files with particular tests in RSpec / Ruby

    - by Bill T
    For my RSpec tests I would to automatically associate data files with each test. To clarify, if my tests each require an xml file as input data and then some xpath statements to validate the responses they get back I would like to externalize the xml and xpath as files and have the testing framework easily associate them with the particular test being run by using the unique ID of the test as the file(s) name. I tried to get this behavior but the solution isn't very clean. I wrote a helper method that takes the value of "description" and combines it with FILE to create a unique identifier which is set into a global variable that other utilities can access. The unique identifier is used to associate the data files I need. I have to call this helper method as the first line of every test, which is ugly. If I have an RSpec example that looks like this: describe "Basic functions of this server I'm testing" do it "should give me back a response" do # Sets a global var to: "my_tests_spec.rb_should_give_me_back_a_response" TestHelper::who_am_i __FILE__, description ... end end Is there some better/cleaner/slicker way I can get an unique ID for each test that I could use to associate data files with? Perhaps something build into RSpec I'm unaware of? Thank you, -Bill

    Read the article

  • ASA hairpining: I basicaly want to allow 2 spokes to be able to communicate with each other.

    - by Thirst4Knowledge
    ASA Spoke to Spoke Communication I have been looking at spke to spoke comms or "hairpining" for months and have posted on numerouse forums but to no avail. I have a Hub and spoke network where the HUB is an ASA Firewall version 8.2 * I basicaly want to allow 2 spokes to be able to communicate with each other. I think that I have got the concept of the ASA Config for example: same-security-traffic permit intra-interface access-list HQ-LAN extended permit ip ASA-LAN 255.255.248.0 HQ-LAN 255.255.255.0 access-list HQ-LAN extended permit ip 192.168.99.0 255.255.255.0 HQ-LAN 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 HQ-LAN 255.255.255.0 access-list no-nat extended permit ip HQ-LAN 255.255.255.0 192.168.99.0 255.255.255.0 access-list no-nat extended permit ip 192.168.99.0 255.255.255.0 HQ-LAN 255.255.255.0 I think my problem may be that the other spokes are not CIsco Firewalls and I need to work out how to do the alternative setups. I want to at least make sure that my firewall etup is correct then I can move onto the other spokes here is my config: Hostname ASA domain-name mydomain.com names ! interface Ethernet0/0 speed 100 duplex full nameif outside security-level 0 ip address 1.1.1.246 255.255.255.224 ! interface Ethernet0/1 speed 100 duplex full nameif inside security-level 100 ip address 192.168.240.33 255.255.255.224 ! interface Ethernet0/2 description DMZ VLAN-253 speed 100 duplex full nameif DMZ security-level 50 ip address 192.168.254.1 255.255.255.0 ! interface Ethernet0/3 no nameif no security-level no ip address ! boot system disk0:/asa821-k8.bin ftp mode passive clock timezone GMT/BST 0 dns server-group DefaultDNS domain-name mydomain.com same-security-traffic permit inter-interface same-security-traffic permit intra-interface object-group network ASA_LAN_Plus_HQ_LAN network-object ASA_LAN 255.255.248.0 network-object HQ-LAN 255.255.255.0 access-list outside_acl remark Exchange web access-list outside_acl extended permit tcp any host MS-Exchange_server-NAT eq https access-list outside_acl remark PPTP Encapsulation access-list outside_acl extended permit gre any host MS-ISA-Server-NAT access-list outside_acl remark PPTP access-list outside_acl extended permit tcp any host MS-ISA-Server-NAT eq pptp access-list outside_acl remark Intra Http access-list outside_acl extended permit tcp any host MS-ISA-Server-NAT eq www access-list outside_acl remark Intra Https access-list outside_acl extended permit tcp any host MS-ISA-Server-NAT eq https access-list outside_acl remark SSL Server-Https 443 access-list outside_acl remark Https 8443(Open VPN Custom port for SSLVPN client downlaod) access-list outside_acl remark FTP 20 access-list outside_acl remark Http access-list outside_acl extended permit tcp any host OpenVPN-Srvr-NAT object-group DM_INLINE_TCP_1 access-list outside_acl extended permit tcp any host OpenVPN-Srvr-NAT eq 8443 access-list outside_acl extended permit tcp any host OpenVPN-Srvr-NAT eq www access-list outside_acl remark For secure remote Managment-SSH access-list outside_acl extended permit tcp any host OpenVPN-Srvr-NAT eq ssh access-list outside_acl extended permit ip Genimage_Anyconnect 255.255.255.0 ASA_LAN 255.255.248.0 access-list ASP-Live remark Live ASP access-list ASP-Live extended permit ip ASA_LAN 255.255.248.0 192.168.60.0 255.255.255.0 access-list Bo remark Bo access-list Bo extended permit ip ASA_LAN 255.255.248.0 192.168.169.0 255.255.255.0 access-list Bill remark Bill access-list Bill extended permit ip ASA_LAN 255.255.248.0 Bill.15 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 Bill.5 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.149.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.160.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.165.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.144.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.140.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.152.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.153.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.163.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.157.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.167.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.156.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 North-Office-LAN 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.161.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.143.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.137.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.159.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 HQ-LAN 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.169.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.150.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.162.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.166.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.168.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.174.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.127.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.173.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.175.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.176.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.100.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.99.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 10.10.10.0 255.255.255.0 access-list no-nat extended permit ip host 192.168.240.34 Cisco-admin-LAN 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 Genimage_Anyconnect 255.255.255.0 access-list no-nat extended permit ip host Tunnel-DC host HQ-SDSL-Peer access-list no-nat extended permit ip HQ-LAN 255.255.255.0 North-Office-LAN 255.255.255.0 access-list no-nat extended permit ip North-Office-LAN 255.255.255.0 HQ-LAN 255.255.255.0 access-list Car remark Car access-list Car extended permit ip ASA_LAN 255.255.248.0 192.168.165.0 255.255.255.0 access-list Che remark Che access-list Che extended permit ip ASA_LAN 255.255.248.0 192.168.144.0 255.255.255.0 access-list Chi remark Chi access-list Chi extended permit ip ASA_LAN 255.255.248.0 192.168.140.0 255.255.255.0 access-list Cla remark Cla access-list Cla extended permit ip ASA_LAN 255.255.248.0 192.168.152.0 255.255.255.0 access-list Eas remark Eas access-list Eas extended permit ip ASA_LAN 255.255.248.0 192.168.149.0 255.255.255.0 access-list Ess remark Ess access-list Ess extended permit ip ASA_LAN 255.255.248.0 192.168.153.0 255.255.255.0 access-list Gat remark Gat access-list Gat extended permit ip ASA_LAN 255.255.248.0 192.168.163.0 255.255.255.0 access-list Hud remark Hud access-list Hud extended permit ip ASA_LAN 255.255.248.0 192.168.157.0 255.255.255.0 access-list Ilk remark Ilk access-list Ilk extended permit ip ASA_LAN 255.255.248.0 192.168.167.0 255.255.255.0 access-list Ken remark Ken access-list Ken extended permit ip ASA_LAN 255.255.248.0 192.168.156.0 255.255.255.0 access-list North-Office remark North-Office access-list North-Office extended permit ip ASA_LAN 255.255.248.0 North-Office-LAN 255.255.255.0 access-list inside_acl remark Inside_ad access-list inside_acl extended permit ip any any access-list Old_HQ remark Old_HQ access-list Old_HQ extended permit ip ASA_LAN 255.255.248.0 HQ-LAN 255.255.255.0 access-list Old_HQ extended permit ip HQ-LAN 255.255.255.0 192.168.99.0 255.255.255.0 access-list She remark She access-list She extended permit ip ASA_LAN 255.255.248.0 192.168.150.0 255.255.255.0 access-list Lit remark Lit access-list Lit extended permit ip ASA_LAN 255.255.248.0 192.168.143.0 255.255.255.0 access-list Mid remark Mid access-list Mid extended permit ip ASA_LAN 255.255.248.0 192.168.137.0 255.255.255.0 access-list Spi remark Spi access-list Spi extended permit ip ASA_LAN 255.255.248.0 192.168.162.0 255.255.255.0 access-list Tor remark Tor access-list Tor extended permit ip ASA_LAN 255.255.248.0 192.168.166.0 255.255.255.0 access-list Tra remark Tra access-list Tra extended permit ip ASA_LAN 255.255.248.0 192.168.168.0 255.255.255.0 access-list Tru remark Tru access-list Tru extended permit ip ASA_LAN 255.255.248.0 192.168.174.0 255.255.255.0 access-list Yo remark Yo access-list Yo extended permit ip ASA_LAN 255.255.248.0 192.168.127.0 255.255.255.0 access-list Nor remark Nor access-list Nor extended permit ip ASA_LAN 255.255.248.0 192.168.159.0 255.255.255.0 access-list Nor extended permit ip ASA_LAN 255.255.248.0 192.168.173.0 255.255.255.0 inactive access-list ST remark ST access-list ST extended permit ip ASA_LAN 255.255.248.0 192.168.175.0 255.255.255.0 access-list Le remark Le access-list Le extended permit ip ASA_LAN 255.255.248.0 192.168.161.0 255.255.255.0 access-list DMZ-ACL remark DMZ access-list DMZ-ACL extended permit ip host OpenVPN-Srvr any access-list no-nat-dmz remark DMZ -No Nat access-list no-nat-dmz extended permit ip 192.168.250.0 255.255.255.0 HQ-LAN 255.255.255.0 access-list Split_Tunnel_List remark ASA-LAN access-list Split_Tunnel_List standard permit ASA_LAN 255.255.248.0 access-list Split_Tunnel_List standard permit Genimage_Anyconnect 255.255.255.0 access-list outside_cryptomap_30 remark Po access-list outside_cryptomap_30 extended permit ip ASA_LAN 255.255.248.0 Po 255.255.255.0 access-list outside_cryptomap_24 extended permit ip ASA_LAN 255.255.248.0 192.168.100.0 255.255.255.0 access-list outside_cryptomap_16 extended permit ip ASA_LAN 255.255.248.0 192.168.99.0 255.255.255.0 access-list outside_cryptomap_34 extended permit ip ASA_LAN 255.255.248.0 10.10.10.0 255.255.255.0 access-list outside_31_cryptomap extended permit ip host 192.168.240.34 Cisco-admin-LAN 255.255.255.0 access-list outside_32_cryptomap extended permit ip host Tunnel-DC host HQ-SDSL-Peer access-list Genimage_VPN_Any_connect_pix_client remark Genimage "Any Connect" VPN access-list Genimage_VPN_Any_connect_pix_client standard permit Genimage_Anyconnect 255.255.255.0 access-list Split-Tunnel-ACL standard permit ASA_LAN 255.255.248.0 access-list nonat extended permit ip HQ-LAN 255.255.255.0 192.168.99.0 255.255.255.0 pager lines 24 logging enable logging timestamp logging console notifications logging monitor notifications logging buffered warnings logging asdm informational no logging message 106015 no logging message 313001 no logging message 313008 no logging message 106023 no logging message 710003 no logging message 106100 no logging message 302015 no logging message 302014 no logging message 302013 no logging message 302018 no logging message 302017 no logging message 302016 no logging message 302021 no logging message 302020 flow-export destination inside MS-ISA-Server 2055 flow-export destination outside 192.168.130.126 2055 flow-export template timeout-rate 1 flow-export delay flow-create 15 mtu outside 1500 mtu inside 1500 mtu DMZ 1500 mtu management 1500 ip local pool RAS-VPN 10.0.0.1.1-10.0.0.1.254 mask 255.255.255.255 icmp unreachable rate-limit 1 burst-size 1 icmp permit any unreachable outside icmp permit any echo outside icmp permit any echo-reply outside icmp permit any outside icmp permit any echo inside icmp permit any echo-reply inside icmp permit any echo DMZ icmp permit any echo-reply DMZ asdm image disk0:/asdm-621.bin no asdm history enable arp timeout 14400 nat-control global (outside) 1 interface global (inside) 1 interface nat (inside) 0 access-list no-nat nat (inside) 1 0.0.0.0 0.0.0.0 nat (DMZ) 0 access-list no-nat-dmz static (inside,outside) MS-ISA-Server-NAT MS-ISA-Server netmask 255.255.255.255 static (DMZ,outside) OpenVPN-Srvr-NAT OpenVPN-Srvr netmask 255.255.255.255 static (inside,outside) MS-Exchange_server-NAT MS-Exchange_server netmask 255.255.255.255 access-group outside_acl in interface outside access-group inside_acl in interface inside access-group DMZ-ACL in interface DMZ route outside 0.0.0.0 0.0.0.0 1.1.1.225 1 route inside 10.10.10.0 255.255.255.0 192.168.240.34 1 route outside Genimage_Anyconnect 255.255.255.0 1.1.1.225 1 route inside Open-VPN 255.255.248.0 OpenVPN-Srvr 1 route inside HQledon-Voice-LAN 255.255.255.0 192.168.240.34 1 route outside Bill 255.255.255.0 1.1.1.225 1 route outside Yo 255.255.255.0 1.1.1.225 1 route inside 192.168.129.0 255.255.255.0 192.168.240.34 1 route outside HQ-LAN 255.255.255.0 1.1.1.225 1 route outside Mid 255.255.255.0 1.1.1.225 1 route outside 192.168.140.0 255.255.255.0 1.1.1.225 1 route outside 192.168.143.0 255.255.255.0 1.1.1.225 1 route outside 192.168.144.0 255.255.255.0 1.1.1.225 1 route outside 192.168.149.0 255.255.255.0 1.1.1.225 1 route outside 192.168.152.0 255.255.255.0 1.1.1.225 1 route outside 192.168.153.0 255.255.255.0 1.1.1.225 1 route outside North-Office-LAN 255.255.255.0 1.1.1.225 1 route outside 192.168.156.0 255.255.255.0 1.1.1.225 1 route outside 192.168.157.0 255.255.255.0 1.1.1.225 1 route outside 192.168.159.0 255.255.255.0 1.1.1.225 1 route outside 192.168.160.0 255.255.255.0 1.1.1.225 1 route outside 192.168.161.0 255.255.255.0 1.1.1.225 1 route outside 192.168.162.0 255.255.255.0 1.1.1.225 1 route outside 192.168.163.0 255.255.255.0 1.1.1.225 1 route outside 192.168.165.0 255.255.255.0 1.1.1.225 1 route outside 192.168.166.0 255.255.255.0 1.1.1.225 1 route outside 192.168.167.0 255.255.255.0 1.1.1.225 1 route outside 192.168.168.0 255.255.255.0 1.1.1.225 1 route outside 192.168.173.0 255.255.255.0 1.1.1.225 1 route outside 192.168.174.0 255.255.255.0 1.1.1.225 1 route outside 192.168.175.0 255.255.255.0 1.1.1.225 1 route outside 192.168.99.0 255.255.255.0 1.1.1.225 1 route inside ASA_LAN 255.255.255.0 192.168.240.34 1 route inside 192.168.124.0 255.255.255.0 192.168.240.34 1 route inside 192.168.50.0 255.255.255.0 192.168.240.34 1 route inside 192.168.51.0 255.255.255.128 192.168.240.34 1 route inside 192.168.240.0 255.255.255.224 192.168.240.34 1 route inside 192.168.240.164 255.255.255.224 192.168.240.34 1 route inside 192.168.240.196 255.255.255.224 192.168.240.34 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa-server vpn protocol radius max-failed-attempts 5 aaa-server vpn (inside) host 192.168.X.2 timeout 60 key a5a53r3t authentication-port 1812 radius-common-pw a5a53r3t aaa authentication ssh console LOCAL aaa authentication http console LOCAL http server enable http 0.0.0.0 0.0.0.0 inside http 1.1.1.2 255.255.255.255 outside http 1.1.1.234 255.255.255.255 outside http 0.0.0.0 0.0.0.0 management http 1.1.100.198 255.255.255.255 outside http 0.0.0.0 0.0.0.0 outside crypto map FW_Outside_map 1 match address Bill crypto map FW_Outside_map 1 set peer x.x.x.121 crypto map FW_Outside_map 1 set transform-set SECURE crypto map FW_Outside_map 2 match address Bo crypto map FW_Outside_map 2 set peer x.x.x.202 crypto map FW_Outside_map 2 set transform-set SECURE crypto map FW_Outside_map 3 match address ASP-Live crypto map FW_Outside_map 3 set peer x.x.x.113 crypto map FW_Outside_map 3 set transform-set SECURE crypto map FW_Outside_map 4 match address Car crypto map FW_Outside_map 4 set peer x.x.x.205 crypto map FW_Outside_map 4 set transform-set SECURE crypto map FW_Outside_map 5 match address Old_HQ crypto map FW_Outside_map 5 set peer x.x.x.2 crypto map FW_Outside_map 5 set transform-set SECURE WG crypto map FW_Outside_map 6 match address Che crypto map FW_Outside_map 6 set peer x.x.x.204 crypto map FW_Outside_map 6 set transform-set SECURE crypto map FW_Outside_map 7 match address Chi crypto map FW_Outside_map 7 set peer x.x.x.212 crypto map FW_Outside_map 7 set transform-set SECURE crypto map FW_Outside_map 8 match address Cla crypto map FW_Outside_map 8 set peer x.x.x.215 crypto map FW_Outside_map 8 set transform-set SECURE crypto map FW_Outside_map 9 match address Eas crypto map FW_Outside_map 9 set peer x.x.x.247 crypto map FW_Outside_map 9 set transform-set SECURE crypto map FW_Outside_map 10 match address Ess crypto map FW_Outside_map 10 set peer x.x.x.170 crypto map FW_Outside_map 10 set transform-set SECURE crypto map FW_Outside_map 11 match address Hud crypto map FW_Outside_map 11 set peer x.x.x.8 crypto map FW_Outside_map 11 set transform-set SECURE crypto map FW_Outside_map 12 match address Gat crypto map FW_Outside_map 12 set peer x.x.x.212 crypto map FW_Outside_map 12 set transform-set SECURE crypto map FW_Outside_map 13 match address Ken crypto map FW_Outside_map 13 set peer x.x.x.230 crypto map FW_Outside_map 13 set transform-set SECURE crypto map FW_Outside_map 14 match address She crypto map FW_Outside_map 14 set peer x.x.x.24 crypto map FW_Outside_map 14 set transform-set SECURE crypto map FW_Outside_map 15 match address North-Office crypto map FW_Outside_map 15 set peer x.x.x.94 crypto map FW_Outside_map 15 set transform-set SECURE crypto map FW_Outside_map 16 match address outside_cryptomap_16 crypto map FW_Outside_map 16 set peer x.x.x.134 crypto map FW_Outside_map 16 set transform-set SECURE crypto map FW_Outside_map 16 set security-association lifetime seconds crypto map FW_Outside_map 17 match address Lit crypto map FW_Outside_map 17 set peer x.x.x.110 crypto map FW_Outside_map 17 set transform-set SECURE crypto map FW_Outside_map 18 match address Mid crypto map FW_Outside_map 18 set peer 78.x.x.110 crypto map FW_Outside_map 18 set transform-set SECURE crypto map FW_Outside_map 19 match address Sp crypto map FW_Outside_map 19 set peer x.x.x.47 crypto map FW_Outside_map 19 set transform-set SECURE crypto map FW_Outside_map 20 match address Tor crypto map FW_Outside_map 20 set peer x.x.x.184 crypto map FW_Outside_map 20 set transform-set SECURE crypto map FW_Outside_map 21 match address Tr crypto map FW_Outside_map 21 set peer x.x.x.75 crypto map FW_Outside_map 21 set transform-set SECURE crypto map FW_Outside_map 22 match address Yo crypto map FW_Outside_map 22 set peer x.x.x.40 crypto map FW_Outside_map 22 set transform-set SECURE crypto map FW_Outside_map 23 match address Tra crypto map FW_Outside_map 23 set peer x.x.x.145 crypto map FW_Outside_map 23 set transform-set SECURE crypto map FW_Outside_map 24 match address outside_cryptomap_24 crypto map FW_Outside_map 24 set peer x.x.x.46 crypto map FW_Outside_map 24 set transform-set SECURE crypto map FW_Outside_map 24 set security-association lifetime seconds crypto map FW_Outside_map 25 match address Nor crypto map FW_Outside_map 25 set peer x.x.x.70 crypto map FW_Outside_map 25 set transform-set SECURE crypto map FW_Outside_map 26 match address Ilk crypto map FW_Outside_map 26 set peer x.x.x.65 crypto map FW_Outside_map 26 set transform-set SECURE crypto map FW_Outside_map 27 match address Nor crypto map FW_Outside_map 27 set peer x.x.x.240 crypto map FW_Outside_map 27 set transform-set SECURE crypto map FW_Outside_map 28 match address ST crypto map FW_Outside_map 28 set peer x.x.x.163 crypto map FW_Outside_map 28 set transform-set SECURE crypto map FW_Outside_map 28 set security-association lifetime seconds crypto map FW_Outside_map 28 set security-association lifetime kilobytes crypto map FW_Outside_map 29 match address Lei crypto map FW_Outside_map 29 set peer x.x.x.4 crypto map FW_Outside_map 29 set transform-set SECURE crypto map FW_Outside_map 30 match address outside_cryptomap_30 crypto map FW_Outside_map 30 set peer x.x.x.34 crypto map FW_Outside_map 30 set transform-set SECURE crypto map FW_Outside_map 31 match address outside_31_cryptomap crypto map FW_Outside_map 31 set pfs crypto map FW_Outside_map 31 set peer Cisco-admin-Peer crypto map FW_Outside_map 31 set transform-set ESP-AES-256-SHA crypto map FW_Outside_map 32 match address outside_32_cryptomap crypto map FW_Outside_map 32 set pfs crypto map FW_Outside_map 32 set peer HQ-SDSL-Peer crypto map FW_Outside_map 32 set transform-set ESP-AES-256-SHA crypto map FW_Outside_map 34 match address outside_cryptomap_34 crypto map FW_Outside_map 34 set peer x.x.x.246 crypto map FW_Outside_map 34 set transform-set ESP-AES-128-SHA ESP-AES-192-SHA ESP-AES-256-SHA crypto map FW_Outside_map 65535 ipsec-isakmp dynamic dynmap crypto map FW_Outside_map interface outside crypto map FW_outside_map 31 set peer x.x.x.45 crypto isakmp identity address crypto isakmp enable outside crypto isakmp policy 9 webvpn enable outside svc enable group-policy ASA-LAN-VPN internal group-policy ASA_LAN-VPN attributes wins-server value 192.168.x.1 192.168.x.2 dns-server value 192.168.x.1 192.168.x.2 vpn-tunnel-protocol IPSec svc split-tunnel-policy tunnelspecified split-tunnel-network-list value Split-Tunnel-ACL default-domain value MYdomain username xxxxxxxxxx password privilege 15 tunnel-group DefaultRAGroup ipsec-attributes isakmp keepalive threshold 30 retry 2 tunnel-group DefaultWEBVPNGroup ipsec-attributes isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.121 type ipsec-l2l tunnel-group x.x.x..121 ipsec-attributes pre-shared-key * isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.202 type ipsec-l2l tunnel-group x.x.x.202 ipsec-attributes pre-shared-key * isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.113 type ipsec-l2l tunnel-group x.x.x.113 ipsec-attributes pre-shared-key * isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.205 type ipsec-l2l tunnel-group x.x.x.205 ipsec-attributes pre-shared-key * isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.204 type ipsec-l2l tunnel-group x.x.x.204 ipsec-attributes pre-shared-key * isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.212 type ipsec-l2l tunnel-group x.x.x.212 ipsec-attributes pre-shared-key * tunnel-group x.x.x.215 type ipsec-l2l tunnel-group x.x.x.215 ipsec-attributes pre-shared-key * tunnel-group x.x.x.247 type ipsec-l2l tunnel-group x.x.x.247 ipsec-attributes pre-shared-key * tunnel-group x.x.x.170 type ipsec-l2l tunnel-group x.x.x.170 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x..8 type ipsec-l2l tunnel-group x.x.x.8 ipsec-attributes pre-shared-key * tunnel-group x.x.x.212 type ipsec-l2l tunnel-group x.x.x.212 ipsec-attributes pre-shared-key * tunnel-group x.x.x.230 type ipsec-l2l tunnel-group x.x.x.230 ipsec-attributes pre-shared-key * tunnel-group x.x.x.24 type ipsec-l2l tunnel-group x.x.x.24 ipsec-attributes pre-shared-key * tunnel-group x.x.x.46 type ipsec-l2l tunnel-group x.x.x.46 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.4 type ipsec-l2l tunnel-group x.x.x.4 ipsec-attributes pre-shared-key * tunnel-group x.x.x.110 type ipsec-l2l tunnel-group x.x.x.110 ipsec-attributes pre-shared-key * tunnel-group 78.x.x.110 type ipsec-l2l tunnel-group 78.x.x.110 ipsec-attributes pre-shared-key * tunnel-group x.x.x.47 type ipsec-l2l tunnel-group x.x.x.47 ipsec-attributes pre-shared-key * tunnel-group x.x.x.34 type ipsec-l2l tunnel-group x.x.x.34 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x..129 type ipsec-l2l tunnel-group x.x.x.129 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.94 type ipsec-l2l tunnel-group x.x.x.94 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.40 type ipsec-l2l tunnel-group x.x.x.40 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.65 type ipsec-l2l tunnel-group x.x.x.65 ipsec-attributes pre-shared-key * tunnel-group x.x.x.70 type ipsec-l2l tunnel-group x.x.x.70 ipsec-attributes pre-shared-key * tunnel-group x.x.x.134 type ipsec-l2l tunnel-group x.x.x.134 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.163 type ipsec-l2l tunnel-group x.x.x.163 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.2 type ipsec-l2l tunnel-group x.x.x.2 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group ASA-LAN-VPN type remote-access tunnel-group ASA-LAN-VPN general-attributes address-pool RAS-VPN authentication-server-group vpn authentication-server-group (outside) vpn default-group-policy ASA-LAN-VPN tunnel-group ASA-LAN-VPN ipsec-attributes pre-shared-key * tunnel-group x.x.x.184 type ipsec-l2l tunnel-group x.x.x.184 ipsec-attributes pre-shared-key * tunnel-group x.x.x.145 type ipsec-l2l tunnel-group x.x.x.145 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.75 type ipsec-l2l tunnel-group x.x.x.75 ipsec-attributes pre-shared-key * tunnel-group x.x.x.246 type ipsec-l2l tunnel-group x.x.x.246 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.2 type ipsec-l2l tunnel-group x.x.x..2 ipsec-attributes pre-shared-key * tunnel-group x.x.x.98 type ipsec-l2l tunnel-group x.x.x.98 ipsec-attributes pre-shared-key * ! ! ! policy-map global_policy description Netflow class class-default flow-export event-type all destination MS-ISA-Server policy-map type inspect dns migrated_dns_map_1 parameters message-length maximum 512 Anyone have a clue because Im on the verge of going postal.....

    Read the article

< Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >