Search Results

Search found 1480 results on 60 pages for 'dr jerry'.

Page 10/60 | < Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >

• Slow Browsing/Direct Download, but Fast Bittorrent Download

  - by Dr Haisook

  I'm using Windows XP SP2. I have a 1 MB connection via a SpeedTouch 585, and my internet speed registers at 0.3 MB, with a maximum download of 30kbps. Not to mention a terrible ping at 500-1500. On the other hand, I get full speed in uTorrent - a bittorrent program - reaching up to 100 kbps; the way it should be. I haven't made any changes to anything. And it has been functioning well until the last month. I waited in hope that it could be an ISP issue and that it would be resolved, but their support crew did not help me with this problem either. I've tried disabling all firewalls, and all wireless connections, using different browsers, and disabling QoS. But it did not work. Me thinks it's an ISP issue, but if so, how am I getting full speed in uTorrent? Could somebody help me out with this? Thanks.

  Read the article

• Recommendations for an inexpensive Surveillance Camera Kit that I can remotely access

  - by dr dork

  Hello! I just saw a deal on Newegg for this surveillance camera kit and it got me to thinking about installing a setup in my house. Can anyone recommend a decent surveillance camera kit, nothing fancy, that will allow me to access it from any computer (whether it's through a webpage or client program I need to install)? Thanks so much in advance for your help, I'm going to start researching this question right now.

  Read the article

• How to use a DVI/HDMI monitor with Mac Mini's DisplayPort?

  - by dr dork

  If I buy a Mac Mini, how can I use it with my Dell monitor? The Dell does not have a DisplayPort, only DVI and HDMI. I was looking at the Mac Minis and noticed they don't have DVI or VGA ports. Does the Mac Mini come with any kind of an adapter that will allow me to use my existing Dell monitor? Thanks in advance for your help, I'm going to start researching this question right now.

  Read the article

• TAR command to extract a single file from a .tar.gz

  - by Dr. DOT

  Does anyone have a command syntax for extracting 1 file from a .tar.gz that also allows me to place the extracted file in a certain directory? I have Google'd this and get too many variations with a lot of forum threads stating the syntax doesn't work. Before I venture on I prefer to know the command will work because I do not want to risk overwriting files and directories already present on my server. Thanks.

  Read the article

• Citrix Performance monitoring

  - by Dr I

  Hi people, I has a strange thing which appears on my Citrix Farm today. My users are equiped with a Thin client Axel Model 80F, and today, one of them sustained a problem on it. He opened a citrix's Publish Desktop session (Host by a farm of Windows 2003 R2 SP2 Servers), he loaded Lotus Notes and a mail who contained an PDF attached file. Once he has opened his PDF File, his session has freezed. We've just reboot the Thin Client, and log in again on the session (which hasn't been closed during the process). Once we have log in again, we try to read the pdf and once again afer half a page the session freeze again (I can see the mouse moving on the screen but can make anything). Then I close the session, reboot correctly the thin client, and "Tada" with the same manipulationsn averything is correct and we don't facing any freeze. Well Now my question is: Is that bug came from the thin client or the server about you? I've checked on my farm and I don't have any alert from the Citrix's Monitoring console logs. According to me it's due to the Thin Client BUT I ddon't have enought monitoring tools to be sure of that. So do you have some quite godd monitoring tools or method? My config: Windows 2003 R2 SP2 Citrix Xenapp 5.0

  Read the article

• Recommendations for a Surveillance Camera Kit that I can remotely access

  - by dr dork

  Hello! I just saw a deal on Newegg for this surveillance camera kit and it got me to thinking about installing a setup in my house. Can anyone recommend a decent surveillance camera kit, nothing fancy, that will allow me to access it from any computer (whether it's through a webpage or client program I need to install)? Thanks so much in advance for your help, I'm going to start researching this question right now.

  Read the article

• DHCLIENT.CONF System variables.

  - by Dr I

  Hello, I've just a little question. My DNS Servers are updated by our DHCP Server (Microsoft Windows 2003 R2 SP2). My clients are Debian Linux Distro's, and I have to modify my DHCLIENT.CONF file on it to send his Full Qualified Hostname. BUT I've about 1600 computers and I don't want to modify each client one by one, then, Could I for exemple use a System Variable on the Config file? Exemple: #DHCLIENT CONF; send "$hostname" where $hostname variable is the alias write on BASHRC for the hostname -f command. If you need any more informations just tell me.

  Read the article

• Security Resources

  - by dr.pooter

  What types of sites do you visit, on a regular basis, to stay current on information security issues? Some examples from my list include: http://isc.sans.org/ http://www.kaspersky.com/viruswatch3 http://www.schneier.com/blog/ http://blog.fireeye.com/research/ As well as following the security heavyweights on twitter. I'm curious to hear what resources you recommend for daily monitoring. Anything specific to particular operating systems or other software. Are mailing lists still considered valuable. My goal would be to trim the cruft of all the things I'm currently subscribed to and focus on the essentials.

  Read the article

• openLdap for windows and phpldapadmin

  - by Dr Casper Black

  Hi, Im having a problem connecting all of this. Im new to Ldap and after failing to install all of this on Ubuntu 10.04 Im trying to set it up on my local PC. I installed OpenLdap for windows http://www.userbooster.de/en/download/openldap-for-windows.aspx, Enabled the php5.3.1 extension for ldap (c:\xampp\php\ext\php_ldap.dll) in php.ini Copied the ssleay32.dll and libeay32.dll to Windows\System32 & Windows\System (Windows XP) Set the password generated by c:\Program Files\OpenLDAP\slappasswd.exe in c:\Program Files\OpenLDAP\slapd.conf (rootpw {SSHA}hash) run the c:\Program Files\OpenLDAP\slapd.exe Install phpldapadmin and call https:// 127.0.0.1 / phpldapadmin/ when I enter the credentials i get Invalid credentials (49) for user and in openldap.log i get could not stat config file "%SYSCONFDIR%\slapd.conf": No such file or directory (2) Can someone help.

  Read the article

• KVM-admin tools required

  - by Dr. Death

  I require the KVM-admin tools that are supposed to be on the KVM home page http://www.linux-kvm.org/page/Kvmtools#Download but I am unable to find any refernce for then. Can anybody from the forum tell me from where I can get them. If somebody has a copy of them them please share a link so that I can get them. I specifically require the below tools: kvm-admin boot domain_name List item kvm-admin status domain_name kvm-admin status all kvm-admin monitor domain_name kvm-admin show domain_name

  Read the article

• qemu command not running directly

  - by Dr. Death

  Can I use "qemu://localhost/system " command directly inplace of "virsh -c qemu://localhost/system " command if my both machines are physically connected in a network as virsh will simply creating the virtual shell between two systems? can I use ssh in place of virtual shell here? I tried this but system gives no directory or file name for qemu even when i had qemu installed properly in my system. but when i use virsh i did not get such errors. Do i need to open any unix socket for doing this?

  Read the article

• backup of KVM VM's running on Ubuntu 12.4.1 precise edition from a remote machine

  - by Dr. Death

  I am creating a library API which will take the backup of all the VM's running on KVM hypervisor. My VM's can be of any type. I am taking this backup from a remote machine and need to put the backup at remote server. I have KVM, Libvirt installed on my system. Some of my VM's are LVM based and some are normal VM's running on KVM. I research and found out an excellent perl script for taking the backup http://pof.eslack.org/2010/12/23/best-solution-to-fully-backup-kvm-virtual-machines/ but since I am developing this library in C++ I cannot use it however it has given me a good understanding of how it will work. One thing I didnot able to sort out is if my VM's are not created using virt-manager or are created using any other tool them virsh system list command does not give them in the list of running VM's however they are running perfectly on my KVM server. Is there a way to list these VM's in my system list anyhow? secondly, when I am taking backup from the remote machine I am getting out of my ssh mode as soon as my libvirt command finishes and for every command I need to ssh again, Is there a way that I do not need to ssh each and every time? I have already used the rsa key for ssh but when once my command finishes my control moves to the remote machine again and try to find out my source VM location in remote machine's local drives which in turn fails it. here is the main problem I am facing. also for the LVM based VM I am able to take the live backup but for non LVM based my machines are getting suspended and not been able to take the live backup. Since my library will work on the remote machine only I might not know the VM's configruation on the KVM server. so need to make it consistent for all the VM's. Please share any thing related to this issue so that I may be able to take the live backup of the non lvm vm's also. I'll update my working and any research findings time to time to all of you. Thanks in advance for your suggestions in these regards.

  Read the article

• nginx 404 logs to all virtualhosting logs

  - by Dr.D

  I am using nginx and i have two sites running: site1 = /1/access.log site2 = /2/access.log when a user get 404 images not found on site2 nginx writes to access.log of site1 & site2 reporting the not found error, i tried everything to get separated logs without luck, i want everything that happen on site1 logged on /1/access.log and everything that happens on site2 logged on /2/access.log any help ?

  Read the article

• Is there a test to see if hardware virtualization (vmx / xvm) are presently enabled within a Linux session?

  - by Dr. Edward Morbius

  I'm writing procedures for configuring VirtualBox support for 64-bit SMP guests, which requires hardware virtualization suppot (VTx/Intel, AMD-V/AMD). I have successfully configured this myself, however I'd like the procedure to be clear. sed -ne '/^flags/s/^.*: //p' /proc/cpuinfo | egrep -q '(vmx|svm)' && echo Has hardware virt || echo No HW virt ... shows if the CPU is capable. I've still got to go enable the feature in BIOS. Any way to test from within Linux to see that this is no or not? Thanks.

  Read the article

• Advantages of multiple SQL Server files with a single RAID array

  - by Dr Giles M

  Originally posted on stack overflow, but re-worded. Imagine the scenario : For a database I have RAID arrays R: (MDF) T: (transaction log) and of course shared transparent usage of X: (tempDB). I've been reading around and get the impression that if you are using RAID then adding multiple SQL Server NDF files sitting on R: within a filegroup won't yeild any more improvements. Of course, adding another raid array S: and putting an NDF file on that would. However, being a reasonably savvy software person, it's not unthinkable to hypothesise that, even for smaller MDFs sitting on one RAID array that SQL Server will perform growth and locking operations (for writes) on the MDF, so adding NDFs to the filegroup even if they sat on R: would distribute the locking operations and growth operations allowing more throughput? Or does the time taken to reconstruct the data from distributed filegroups outweigh the benefits of reduced locking? I'm also aware that the behaviour and benefits may be different for tables/indeces/log. Is there a good site that distinguishes the benefits of multiple files when RAID is already in place?

  Read the article

• Block IP Address including ICMP using UFW

  - by dr jimbob

  I prefer ufw to iptables for configuring my software firewall. After reading about this vulnerability also on askubuntu, I decided to block the fixed IP of the control server: 212.7.208.65. I don't think I'm vulnerable to this particular worm (and understand the IP could easily change), but wanted to answer this particular comment about how you would configure a firewall to block it. I planned on using: # sudo ufw deny to 212.7.208.65 # sudo ufw deny from 212.7.208.65 However as a test that the rules were working, I tried pinging after I setup the rules and saw that my default ufw settings let ICMP through even from an IP address set to REJECT or DENY. # ping 212.7.208.65 PING 212.7.208.65 (212.7.208.65) 56(84) bytes of data. 64 bytes from 212.7.208.65: icmp_seq=1 ttl=52 time=79.6 ms ^C --- 212.7.208.65 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 79.630/79.630/79.630/0.000 ms Now, I'm worried that my ICMP settings are too generous (conceivably this or a future worm could setup an ICMP tunnel to bypass my firewall rules). I believe this is the relevant part of my iptables rules is given below (and even though grep doesn't show it; the rules are associated with the chains shown): # sudo iptables -L -n | grep -E '(INPUT|user-input|before-input|icmp |212.7.208.65)' Chain INPUT (policy DROP) ufw-before-input all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-before-input (1 references) ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 3 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 4 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 11 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 12 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 8 ufw-user-input all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-user-input (1 references) DROP all -- 0.0.0.0/0 212.7.208.65 DROP all -- 212.7.208.65 0.0.0.0/0 How should I go about making it so ufw blocks ICMP when I specifically attempt to block an IP address? My /etc/ufw/before.rules has in part: # ok icmp codes -A ufw-before-input -p icmp --icmp-type destination-unreachable -j ACCEPT -A ufw-before-input -p icmp --icmp-type source-quench -j ACCEPT -A ufw-before-input -p icmp --icmp-type time-exceeded -j ACCEPT -A ufw-before-input -p icmp --icmp-type parameter-problem -j ACCEPT -A ufw-before-input -p icmp --icmp-type echo-request -j ACCEPT I'm tried changing ACCEPT above to ufw-user-input: # ok icmp codes -A ufw-before-input -p icmp --icmp-type destination-unreachable -j ufw-user-input -A ufw-before-input -p icmp --icmp-type source-quench -j ufw-user-input -A ufw-before-input -p icmp --icmp-type time-exceeded -j ufw-user-input -A ufw-before-input -p icmp --icmp-type parameter-problem -j ufw-user-input -A ufw-before-input -p icmp --icmp-type echo-request -j ufw-user-input But ufw wouldn't restart after that. I'm not sure why (still troubleshooting) and also not sure if this is sensible? Will there be any negative effects (besides forcing the software firewall to force ICMP through a few more rules)?

  Read the article

• Does multiple files in SQL Server when using RAID help reduce conflicts in growth and file-locking?

  - by Dr Giles M

  I've been reading around and get the impression that if you are using RAID then using multiple SQL Server files within a filegroup won't yeild any more improvements, and the benefits are purely administrative (if you started to run out of space or wanted to partition off data into managable chunks for backups/balancing the data around your big server room). However, being a reasonably savvy software person, it's not unthinkable to hypothesise that, even for smaller databases that SQL Server will perform growth and locking operations (for writes) on a LOGICAL file basis, so even if you are using RAID, it seems to make sense to have multiple files in a file group to balance I/O, or does the time taken to reconstruct the data from distributed filegroups outweigh the benefits of reduced locking? I'm also aware that the behaviour and benefits may be different for tables/indeces/log. Is there a good site that distinguishes the benefits of multiple files when RAID is already in place?

  Read the article

• Apache Directive for Allow From

  - by Dr. DOT

  I want to button down write access on a particular file using the Allow form directive in my httpd.conf file. I have a PHP script that I want to be the only resource that can write to this file. Is there a variation of the Allow from that I can define to make this happen?

  Read the article

• What resources are best for staying current about information security?

  - by dr.pooter

  What types of sites do you visit, on a regular basis, to stay current on information security issues? Some examples from my list include: http://isc.sans.org/ http://www.kaspersky.com/viruswatch3 http://www.schneier.com/blog/ http://blog.fireeye.com/research/ As well as following the security heavyweights on twitter. I'm curious to hear what resources you recommend for daily monitoring. Anything specific to particular operating systems or other software. Are mailing lists still considered valuable. My goal would be to trim the cruft of all the things I'm currently subscribed to and focus on the essentials.

  Read the article

• Search for partial IP address using Windows Search?

  - by Dr. Dre

  I have a folder, c:\projects\, added to Windows Index. I know the indexing is working because I search for stuff in this folder all the time and the results come up very fast, and I've never noticed any accuracy problem until now. (I have had to tweak Indexing options to expand which file types have their contents indexed rather than just the file name, etc, but after that Search has worked pretty well for me). I've encountered a problem while trying to search for references to a particular IP address subnet. I'm trying to find all references to IP's with the pattern "192.168.220.xxx" (AKA, the 192.168.220.0/24, AKA 192.168.220.0/255.255.255.0 IP/netmask). Within Windows Explorer: c:\projects**.* is indexed c:\projects\work\project1\network_list.txt contains several "192.168.220.xxx" IP's Indexing status says all items are indexed (193,000 items). When I try to search for partial IP match, there are no search results. Tried searching for: 192.168.220, 192.168, 192.168.220., 192.168.220., 192.168.220.?, 192.168.220.??, 192.168.220.???, 192.168., 192.168.. Also tried variants of all the above surrounded with double quotes. All the searches returned 0 results. Within MS Outlook 2007: My mailbox, and all my offline .pst's are indexed. I search in Outlook pretty frequently, so I'm pretty sure indexed searches work across inbox and all .pst's. Indexing status in Outlook says all items are indexed. I also have references to these IP's in email, and I'd like to find all of them. Basically same deal as above, can't search for "192.168.220.xxx" IP's. Any way to fix this?

  Read the article

• What software can I use to pinpoint why Windows Server 2003 takes 15 seconds for any operation?

  - by Dr. Zim

  Ram is about 1/2 in use, four CPUs are all but idle. I tried "Microsoft Server Performance Advisor" with no luck. No entries in the Event Log for hardware failures, etc. And yet I can click on the start menu and wait 15 seconds for any new attempt. Launching software takes 30 seconds to respond. The server has an 8 drive WD RE 250 gig each Dell Perc 6 Sata raid array with Intel gigabit network cards. Anyone have any software titles that could analyze what is going wrong with this server?

  Read the article

• Is a dedicated server similar in setup to a VPS?

  - by Dr Hydralisk

  I was thinking about getting a dedicated server (I may need the extra power that a VPS can't provide) from The Planet but I don't know to much about how you would operate one. I have experience in setting up multiple VPS's on Linode and Slicehost, I just select my OS in their CP and connect via SSH in putty and do my thing. Is it the same with dedicated servers (just chose you OS from the CP and connect via SSH and put on whatever crap you want)?

  Read the article

• ldap sync with outlook

  - by Dr Casper Black

  Hi, I have a task to research the possibilities of LDAP as a centralized Address Book. I have setup a openLDAP on debian 5.07. I managed to search the LDAP contacts from MS Outlook 2007 (with some drawbacks like Outlook cant recognize street and organization fields). My question is, is it possible ,& how, to sync data on LDAP server with applications that support LDAP? I could not find any data on this topic.

  Read the article

• Best and Proper Permissions Settings for Directory

  - by Dr. DOT

  I am interested in knowing the proper, yet security-conscious settings for a directory. Here's my scenario: I have a username for FTP access to my server called "user". For the purpose of the scenario, PHP runs as "nobody" on my server. I have a directory off the document root called "sample". The "sample" directory is chmod'd at 0755 (drwxr-xr-x) "Sample" is owned by "user" and the group is set to "user" The above is all very straight forward and standard. So I want to have a script be able to create (mkdir) and delete (rmdir) directories under "sample". Yet, I don't want to obviously overly expose my server by opening up the permissions (I could easily chmod sample to 0777 and make it world write-able). What is the best combination of permissions, owner settings and/or group settings to allow my script to create and delete directories under "sample" while retaining the ability for "user" to continue to FTP into the directory? Thanks.

  Read the article

• Two parts: linux startup script to connect to bluetooth and cron to keep it connected

  - by D.R.

  I have a mini bluetooth keyboard and a Raspberry Pi running a Debian-based distro. I know the MAC address of the keyboard but for this question, let's just use AA:BB:CC:DD:EE:FF. Right now I have to have a wired keyboard connected as well as my bluetooth dongle for the mini-keyboard and on the wired keyboard, I have to run the following when the device boots up: sudo hidd --connect AA:BB:CC:DD:EE:FF If the device goes idle for too long, then the bluetooth disconnects and I have to pull out my wired keyboard and retype that same command. What I'm looking for it a way to have that command run at startup and a way to sense if it gets disconnected so that it will auto reconnect. The annoying thing is that they keyboard has to be in pairing mode (even though it has already been paired) when I run that command, otherwise it tells me the host is down. So perhaps the script needs to prevent it from disconnecting due to inactivity, otherwise I'll have to put it back in pairing mode to reconnect. So to recap: - A script to connect at startup (I can make sure to put the keyboard into pairing mode before turning it on) - A script to prevent it from disconnecting (maybe some sort of signal to send to it every 60 seconds or something?) Any help with this is greatly appreciated! StackOverflow is always the best place to find answers to weird questions! I've been searching long and hard for an answer, but finally had to resort to coming here! Thanks!

  Read the article

< Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >