e 164 - Page 10 - Developer IT

django, mod_wsgi, MySQL High CPU - Problems

- by Red Rover

I am having a problem with an OSQA site. It is Django/Apache/mod_wsgi configured site. Every hour, the CPU spikes to 164% (Average) for task HTTPD. After 10 minutes, it frees back up. I have reviewed the logs, cron tables, made many config changes, but cannot track this problem down. Can someone please look at the information below and let me know if it is a configuration problem, or if anyone else has experienced this issue. Running TOP shows HTTPD using 165% of CPU VMware performance monitor also displays spikes. This happens every hour for 10 minutes. I have the following information from server status Server Version: Apache/2.2.15 (Unix) DAV/2 mod_wsgi/3.2 Python/2.6.6 Server Built: Feb 7 2012 09:50:15 Current Time: Sunday, 10-Jun-2012 21:44:29 EDT Restart Time: Sunday, 10-Jun-2012 19:44:51 EDT Parent Server Generation: 0 Server uptime: 1 hour 59 minutes 37 seconds Total accesses: 1088 - Total Traffic: 11.5 MB CPU Usage: u80.26 s243.8 cu0 cs0 - 4.52% CPU load .152 requests/sec - 1682 B/second - 10.8 kB/request 4 requests currently being processed, 11 idle workers ....._..........__......W....................................... ...................................C._..._....._L__._L_._....... ...................... Scoreboard Key: "_" Waiting for Connection, "S" Starting up, "R" Reading Request, "W" Sending Reply, "K" Keepalive (read), "D" DNS Lookup, "C" Closing connection, "L" Logging, "G" Gracefully finishing, "I" Idle cleanup of worker, "." Open slot with no current process Srv PID Acc M CPU SS Req Conn Child Slot Client VHost Request 0-0 - 0/0/34 . 0.42 327 17 0.0 0.00 0.67 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 1-0 - 0/0/22 . 0.31 339 32 0.0 0.00 0.26 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 2-0 - 0/0/22 . 0.65 358 10 0.0 0.00 0.31 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 3-0 - 0/0/31 . 1.03 378 31 0.0 0.00 0.60 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 4-0 - 0/0/20 . 0.45 356 9 0.0 0.00 0.31 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 5-0 18852 0/16/34 _ 0.98 27 18120 0.0 0.37 0.62 69.180.250.36 osqa.informs.org GET /questions/289/what-is-the-difference-between-operations-re 6-0 - 0/0/32 . 0.94 309 29 0.0 0.00 0.64 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 7-0 - 0/0/31 . 1.15 382 32 0.0 0.00 0.75 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 8-0 - 0/0/21 . 0.28 403 19 0.0 0.00 0.20 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 9-0 - 0/0/32 . 1.37 288 16 0.0 0.00 0.60 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 10-0 - 0/0/33 . 1.72 383 16 0.0 0.00 0.40 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 I am running Django 1.3 This is a mod_wsgi configuration and copied is the wsgi.conf file: <IfModule !python_module> <IfModule !wsgi_module> LoadModule wsgi_module modules/mod_wsgi.so <IfModule wsgi_module> <Directory /var/www/osqa> Order allow,deny Allow from all #Deny from all </Directory> WSGISocketPrefix /var/run/wsgi WSGIPythonEggs /var/tmp WSGIDaemonProcess OSQA maximum-requests=10000 WSGIProcessGroup OSQA Alias /admin_media/ /usr/lib/python2.6/site-packages/Django-1.2.5-py2.6.egg/django/contrib/admin/media/ Alias /m/ /var/www/osqa/forum/skins/ Alias /upfiles/ /var/www/osqa/forum/upfiles/ <Directory /var/www/osqa/forum/skins> Order allow,deny Allow from all </Directory> WSGIScriptAlias / /var/www/osqa/osqa.wsgi </IfModule> </IfModule> </IfModule> This is the httpd.conf file Timeout 120 KeepAlive Off MaxKeepAliveRequests 100 MaxKeepAliveRequests 400 KeepAliveTimeout 3 <IfModule prefork.c> Startservers 15 MinSpareServers 10 MaxSpareServers 20 ServerLimit 50 MaxClients 50 MaxRequestsPerChild 0 </IfModule> <IfModule worker.c> StartServers 4 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> We are using MySQL The server is an ESX4i, configured for the VM to use 4 CPUs and 8 GB Ram. Hyper threading is enabled, 2 physical CPU's, with 4 Logical. the CPU are Intel Xeon 2.8 GHz. Total memory is 12GB

Read the article

Nginx and multiple wordpress instances with fastcgi under same domain

- by damnsweet

My site is running on apache. two instances of wordpress exist under paths /tr/ and /eng/. I want to move the setup to nginx but could not manage to get it working. My setup consists of nging 0.7.66, php 5.3.2, and php-fpm. /tr/ and /eng/ are two separate wordpress instances located under /home/istci/webapps/wordpress_tr and /home/istci/webapps/wordpress respectively. Below is the server section from nginx.conf containing only configuration for tr, yet could not get it working either. server { listen 80; server_name www.example.com; charset utf-8; location ~ ^/$ { rewrite ^(.+)$ http://www.example.com/tr/ permanent; } location ~ /tr/.*php$ { fastcgi_pass unix:/home/istci/var/run/wptr.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /home/istci/webapps/wordpress_tr$fastcgi_script_name; fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param REQUEST_URI $request_uri; fastcgi_param DOCUMENT_URI $document_uri; fastcgi_param DOCUMENT_ROOT $document_root; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param GATEWAY_INTERFACE CGI/1.1; fastcgi_param SERVER_SOFTWARE nginx/$nginx_version; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; # required if PHP was built with --enable-force-cgi-redirect fastcgi_param REDIRECT_STATUS 200; } location /tr/ { root /home/istci/webapps/wordpress_tr/; index index.php index.html index.htm; if (!-e $request_filename) { rewrite ^(.+)$ /tr/index.php?q=$1 last; break; } if (-f $request_filename) { expires 30d; break; } } } php-fpm listens on unix:/home/istci/var/run/wptr.sock. running it in debug-mode shows no active handlers, which means no connection is made to unix socket from nginx. nginx access logs: 127.0.0.1 - - [09/Jun/2010:03:45:11 -0500] "GET /tr/ HTTP/1.0" 404 20 "-" "Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.2.4) Gecko/20100527 Firefox/3.6.4" nginx debug logs : 2010/06/09 03:38:53 [notice] 6922#0: built by gcc 4.1.2 20080704 (Red Hat 4.1.2-48) 2010/06/09 03:38:53 [notice] 6922#0: OS: Linux 2.6.18-164.9.1.el5PAE 2010/06/09 03:38:53 [notice] 6922#0: getrlimit(RLIMIT_NOFILE): 4096:4096 2010/06/09 03:38:53 [notice] 6923#0: start worker processes 2010/06/09 03:38:53 [notice] 6923#0: start worker process 6924 2010/06/09 03:38:53 [notice] 6923#0: start worker process 6925 2010/06/09 03:39:01 [notice] 6925#0: *1 "^(.+)$" matches "/tr/", client: 127.0.0.1, server: www.example.com, request: "GET /tr/ HTTP/1.0", host: "www.example.com" 2010/06/09 03:39:01 [notice] 6925#0: *1 rewritten data: "/tr/index.php", args: "q=/tr/", client: 127.0.0.1, server: www.example.com, request: "GET /tr/ HTTP/1.0", host: "www.example.com" Any clues about what is wrong with my configuration? Thanks.

Read the article

Postfix MySql Dovecot - SMTP Authentication Failure

- by borncamp

Hello I have a Postfix setup with Dovecot and MySql. The server is running Debian Squeeze. The MySql server is a slave that has data pushed to it from a primary (postfix) mail server(running a different os). The emails are stored on a replicated GlusterFS volume. I am able to check email using thunderbird over IMAP. However, SMTP requests fail. After turning on query logs for the MySql server I have noticed that no query statement is executed to retrieve the user information when an SMTP client tries to authenticate. I'd like to know what I'm doing wrong or what the next troubleshooting steps are. I'm about to pull my hair out. Below is some log and configuration data that I thought would be relevant. You're help is much obliged. The file /var/log/mail.log shows Oct 11 14:54:16 mailbox2 postfix/smtpd[25017]: connect from unknown[192.168.0.44] Oct 11 14:54:19 mailbox2 postfix/smtpd[25017]: warning: unknown[192.168.0.44]: SASL PLAIN authentication failed: Oct 11 14:54:25 mailbox2 postfix/smtpd[25017]: warning: unknown[192.168.0.44]: SASL LOGIN authentication failed: VXNlcm5hbWU6 Oct 11 14:55:48 mailbox2 postfix/smtpd[25017]: warning: unknown[192.168.0.44]: SASL PLAIN authentication failed: VXNlcm5hbWU6 Oct 11 14:55:54 mailbox2 postfix/smtpd[25017]: warning: unknown[192.168.0.44]: SASL LOGIN authentication failed: VXNlcm5hbWU6 Oct 11 14:55:57 mailbox2 postfix/smtpd[25017]: disconnect from unknown[192.168.0.44] This is my dovecot.conf file log_timestamp = "%Y-%m-%d %H:%M:%S " mail_location = maildir:/var/mail/virtual/%d/%n/ auth_mechanisms = plain login disable_plaintext_auth = no namespace { inbox = yes location = prefix = INBOX. separator = . type = private } passdb { args = /etc/dovecot/dovecot-mysql.conf driver = sql } protocols = imap pop3 service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-master { mode = 0600 user = postfix } user = root } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { args = /etc/dovecot/dovecot-mysql.conf driver = sql } protocol lda { auth_socket_path = /var/run/dovecot/auth-master mail_plugins = sieve postmaster_address = [email protected] } protocol pop3 { pop3_uidl_format = %08Xu%08Xv } Here is my dovecot-mysql.conf file: connect = host=127.0.0.1 dbname=postfix user=postfix password=ffjM2MYAqQtAzRHX driver = mysql default_pass_scheme = MD5-CRYPT password_query = SELECT username AS user,password FROM mailbox WHERE username = '%u' AND active='1' user_query = SELECT CONCAT('/var/mail/virtual/', maildir) AS home, 1001 AS uid, 109 AS gid, CONCAT('*:messages=10000:bytes=',quota) as quota_rule, 'Trash:ignore' AS quota_rule2 FROM mailbox WHERE username = '%u' AND active='1' Here is my output from 'postconf -n': append_dot_mydomain = no biff = no bounce_template_file = /etc/postfix/bounce.cf broken_sasl_auth_clients = yes config_directory = /etc/postfix delay_warning_time = 0h dovecot_destination_recipient_limit = 1 inet_interfaces = all local_recipient_maps = $virtual_mailbox_maps local_transport = virtual mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 maximal_queue_lifetime = 1d message_size_limit = 25600000 mydestination = mailbox2.cws.net, debian.local.cws.net, localhost.local.cws.net, localhost myhostname = mailbox2.cws.net mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 172.18.0.119 63.164.138.3 myorigin = /etc/mailname proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks $virtual_mailbox_limit_maps readme_directory = no recipient_delimiter = + relay_domains = relayhost = smtp_connect_timeout = 10 smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) smtpd_client_message_rate_limit = 50 smtpd_client_recipient_rate_limit = 500 smtpd_client_restrictions = permit_sasl_authenticated, permit_mynetworks smtpd_delay_reject = yes smtpd_discard_ehlo_keyword_address_maps = hash:/etc/postfix/discard_ehlo smtpd_helo_required = yes smtpd_helo_restrictions = permit_mynetworks, reject_invalid_helo_hostname, permit smtpd_recipient_restrictions = permit_mynetworks,permit_sasl_authenticated,reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_authenticated_header = yes smtpd_sasl_path = private/auth smtpd_sasl_security_options = noanonymous smtpd_sasl_tls_security_options = $smtpd_sasl_security_options smtpd_sasl_type = dovecot smtpd_sender_restrictions = permit_mynetworks, reject_non_fqdn_sender, reject_unknown_sender_domain, permit smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes transport_maps = hash:/etc/postfix/transport virtual_alias_maps = proxy:mysql:/etc/postfix/sql/mysql_virtual_alias_maps.cf, proxy:mysql:/etc/postfix/sql/mysql_virtual_alias_domain_maps.cf, proxy:mysql:/etc/postfix/sql/mysql_virtual_alias_domain_catchall_maps.cf virtual_gid_maps = static:1001 virtual_mailbox_base = /var/mail/virtual/ virtual_mailbox_domains = proxy:mysql:/etc/postfix/sql/mysql_virtual_domains_maps.cf virtual_mailbox_maps = proxy:mysql:/etc/postfix/sql/mysql_virtual_mailbox_maps.cf, proxy:mysql:/etc/postfix/sql/mysql_virtual_alias_domain_mailbox_maps.cf virtual_transport = dovecot virtual_uid_maps = static:1001

Read the article

Unable to remove limit on memory usage for PHP script.

- by Jess Telford

The Situation I am having an issue with a PHP script getting the following error message: Fatal error: Out of memory (allocated 359923712) (tried to allocate 72 bytes) in /path/to/piwik/core/DataTable.php on line 969 The script I'm running is: /path/to/piwik/misc/cron/archive.sh I am assuming the numbers are Bytes, which means that total is approximately 360MB. For all intents and purposes, I have increased the memory limits on the server well above 360MB, yet this is the number (give or take a byte) it consistently errors out at. Please note: This question is not about fixing a memory leak in the script, nor about why the script itself is using so much memory. The script is part of the Piwik archiving process, so I cannot just fix any memory leaks, etc. For more info on this script and why I am increasing the memory limit, see "How to setup auto archiving" The question Given that the script is attempting to use over 360MB of memory, which I cannot change, why does it not seem possible for me to increase the amount of memory available to php on my server? What I've tried Increasing PHP's memory_limit Given the php.ini file: php -i | grep php.ini Configuration File (php.ini) Path => /usr/local/lib Loaded Configuration File => /usr/local/lib/php.ini I have edited that file, so the memory_limit directive reads; memory_limit = -1 Restart Apache, and check the new value has stuck; $ php -i | grep memory_limit memory_limit => -1 => -1 Run the script, and get the same error. I've also tried 1G, 768M, etc, all to the same result (ie; no change). Update 22nd June: Based on Vangel's help, I have attempted to set post_max_size to 20M in combination with setting memory_limit. Again, this has no effect. Removing the memory limit on child processes of Apache I have found and edited the httpd.conf file to make sure there is no RLimitMEM directive. I then used WHM's Apache Configuration Memory Usage Restrictions to generate a restriction, which it claimed was at 1000M (and confirmed by checking httpd.conf). Both of these resulted in no change to the script erroring at 360MB. Increasing the per process memory limits of Linux The current limits set on the system: $ ulimit -m 524288 $ ulimit -v 524288 I have attempted to set both of these to unlimited: $ ulimit -m unlimited $ ulimit -v unlimited $ ulimit -m unlimited $ ulimit -v unlimited Once again, this has resulted in absolutely no improvement in my problem. My setup $ cat /etc/redhat-release CentOS release 5.5 (Final) $ uname -a Linux example.com 2.6.18-164.15.1.el5 #1 SMP Wed Mar 17 11:30:06 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux $ php -i | grep "PHP Version" PHP Version => 5.2.9 $ httpd -V Server version: Apache/2.0.63 Server built: Feb 2 2011 01:25:12 Cpanel::Easy::Apache v3.2.0 rev5291 Server's Module Magic Number: 20020903:13 Server loaded: APR 0.9.17, APR-UTIL 0.9.15 Compiled using: APR 0.9.17, APR-UTIL 0.9.15 Architecture: 64-bit Server compiled with.... -D APACHE_MPM_DIR="server/mpm/prefork" -D APR_HAS_SENDFILE -D APR_HAS_MMAP -D APR_HAVE_IPV6 (IPv4-mapped addresses enabled) -D APR_USE_SYSVSEM_SERIALIZE -D APR_USE_PTHREAD_SERIALIZE -D SINGLE_LISTEN_UNSERIALIZED_ACCEPT -D APR_HAS_OTHER_CHILD -D AP_HAVE_RELIABLE_PIPED_LOGS -D HTTPD_ROOT="/usr/local/apache" -D SUEXEC_BIN="/usr/local/apache/bin/suexec" -D DEFAULT_PIDLOG="logs/httpd.pid" -D DEFAULT_SCOREBOARD="logs/apache_runtime_status" -D DEFAULT_LOCKFILE="logs/accept.lock" -D DEFAULT_ERRORLOG="logs/error_log" -D AP_TYPES_CONFIG_FILE="conf/mime.types" -D SERVER_CONFIG_FILE="conf/httpd.conf" Output of $ php -i: http://pastebin.com/EiRut6Nm

Read the article

/phpTest/zologize/axa.php? Another botnet?

- by M132

Starring at the log made me think, what is /phpTest/zologize/axa.php and why are bots looking for it? Previously, I had lots of /HNAP1/ requests. Requesting /HNAP1/ from IPs from log revealed, that all of them were sent by Linksys routers. 3 months later, these requests turned out to be generated by a router worm called TheMoon. But requesting /phpTest/zologize/axa.php from these servers returns a 404 error. How these servers got infected, and how can I protect mine from this? 124.11.224.69 - - [02/Feb/2014:00:37:16 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 168 "-" "-" 140.113.238.121 - - [21/Feb/2014:01:24:32 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 168 "-" "-" 77.121.132.79 - - [22/Feb/2014:00:03:56 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 168 "-" "-" 142.4.201.210 - - [24/Feb/2014:21:54:33 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 168 "-" "-" 212.83.168.39 - - [24/Feb/2014:23:16:00 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 168 "-" "-" 87.117.229.210 - - [26/Feb/2014:06:34:58 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 162 "-" "-" 78.100.82.99 - - [26/Feb/2014:08:25:48 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 162 "-" "-" 198.50.205.219 - - [26/Feb/2014:09:59:11 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 162 "-" "-" 210.60.142.107 - - [27/Feb/2014:00:12:12 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 162 "-" "-" 101.109.4.73 - - [27/Feb/2014:08:50:46 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 162 "-" "-" 61.91.128.158 - - [27/Feb/2014:08:59:15 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 162 "-" "-" 201.188.41.175 - - [27/Feb/2014:11:25:42 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 162 "-" "-" 220.133.137.2 - - [27/Feb/2014:12:12:46 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 162 "-" "-" 203.156.104.88 - - [28/Feb/2014:18:11:49 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 162 "-" "-" 61.19.52.58 - - [28/Feb/2014:22:02:56 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 162 "-" "-" 84.2.92.40 - - [28/Feb/2014:23:04:17 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 162 "-" "-" 58.64.205.11 - - [01/Mar/2014:06:08:33 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 21 "-" "-" 113.61.200.151 - - [01/Mar/2014:18:25:25 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 21 "-" "-" 178.33.219.12 - - [03/Mar/2014:14:41:48 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 21 "-" "-" 74.63.220.132 - - [04/Mar/2014:01:16:44 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 21 "-" "-" 187.141.230.106 - - [04/Mar/2014:15:39:26 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 21 "-" "-" 103.22.181.146 - - [09/May/2014:17:16:56 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 502 166 "-" "-" 176.31.200.14 - - [10/May/2014:19:52:24 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 68 "-" "-" 124.120.92.70 - - [12/May/2014:16:19:40 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 68 "-" "-" 219.85.198.142 - - [15/May/2014:19:21:22 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-" 80.84.53.226 - - [23/May/2014:08:58:25 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-" 87.213.11.165 - - [25/May/2014:06:20:27 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-" 122.116.220.106 - - [25/May/2014:07:10:21 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-" 58.8.128.30 - - [29/May/2014:02:43:49 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-" 142.4.197.135 - - [29/May/2014:11:36:45 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-" 178.32.243.65 - - [30/May/2014:01:59:53 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-" 58.8.164.221 - - [30/May/2014:14:04:16 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-" 140.127.182.15 - - [01/Jun/2014:14:45:40 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-" 218.166.43.21 - - [01/Jun/2014:16:07:52 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-" 178.32.188.140 - - [01/Jun/2014:19:11:46 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-" 94.23.211.173 - - [05/Jun/2014:00:52:52 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-" 120.117.105.201 - - [05/Jun/2014:04:39:39 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-" 187.172.27.146 - - [05/Jun/2014:10:20:22 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-" 203.195.219.91 - - [05/Jun/2014:10:53:42 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-"

Read the article

Adding DTrace Probes to PHP Extensions

- by cj

The powerful DTrace tracing facility has some PHP-specific probes that can be enabled with --enable-dtrace. DTrace for Linux is being created by Oracle and is currently in tech preview. Currently it doesn't support userspace tracing so, in the meantime, Systemtap can be used to monitor the probes implemented in PHP. This was recently outlined in David Soria Parra's post Probing PHP with Systemtap on Linux. My post shows how DTrace probes can be added to PHP extensions and traced on Linux. I was using Oracle Linux 6.3. Not all Linux kernels are built with Systemtap, since this can impact stability. Check whether your running kernel (or others installed) have Systemtap enabled, and reboot with such a kernel: # grep CONFIG_UTRACE /boot/config-`uname -r` # grep CONFIG_UTRACE /boot/config-* When you install Systemtap itself, the package systemtap-sdt-devel is needed since it provides the sdt.h header file: # yum install systemtap-sdt-devel You can now install and build PHP as shown in David's article. Basically the build is with: $ cd ~/php-src $ ./configure --disable-all --enable-dtrace $ make (For me, running 'make' a second time failed with an error. The workaround is to do 'git checkout Zend/zend_dtrace.d' and then rerun 'make'. See PHP Bug 63704) David's article shows how to trace the probes already implemented in PHP. You can also use Systemtap to trace things like userspace PHP function calls. For example, create test.php: <?php $c = oci_connect('hr', 'welcome', 'localhost/orcl'); $s = oci_parse($c, "select dbms_xmlgen.getxml('select * from dual') xml from dual"); $r = oci_execute($s); $row = oci_fetch_array($s, OCI_NUM); $x = $row[0]->load(); $row[0]->free(); echo $x; ?> The normal output of this file is the XML form of Oracle's DUAL table: $ ./sapi/cli/php ~/test.php <?xml version="1.0"?> <ROWSET> <ROW> <DUMMY>X</DUMMY> </ROW> </ROWSET> To trace the PHP function calls, create the tracing file functrace.stp: probe process("sapi/cli/php").function("zif_*") { printf("Started function %s\n", probefunc()); } probe process("sapi/cli/php").function("zif_*").return { printf("Ended function %s\n", probefunc()); } This makes use of the way PHP userspace functions (not builtins) like oci_connect() map to C functions with a "zif_" prefix. Login as root, and run System tap on the PHP script: # cd ~cjones/php-src # stap -c 'sapi/cli/php ~cjones/test.php' ~cjones/functrace.stp Started function zif_oci_connect Ended function zif_oci_connect Started function zif_oci_parse Ended function zif_oci_parse Started function zif_oci_execute Ended function zif_oci_execute Started function zif_oci_fetch_array Ended function zif_oci_fetch_array Started function zif_oci_lob_load <?xml version="1.0"?> <ROWSET> <ROW> <DUMMY>X</DUMMY> </ROW> </ROWSET> Ended function zif_oci_lob_load Started function zif_oci_free_descriptor Ended function zif_oci_free_descriptor Each call and return is logged. The Systemtap scripting language allows complex scripts to be built. There are many examples on the web. To augment this generic capability and the PHP probes in PHP, other extensions can have probes too. Below are the steps I used to add probes to OCI8: I created a provider file ext/oci8/oci8_dtrace.d, enabling three probes. The first one will accept a parameter that runtime tracing can later display: provider php { probe oci8__connect(char *username); probe oci8__nls_start(); probe oci8__nls_done(); }; I updated ext/oci8/config.m4 with the PHP_INIT_DTRACE macro. The patch is at the end of config.m4. The macro takes the provider prototype file, a name of the header file that 'dtrace' will generate, and a list of sources files with probes. When --enable-dtrace is used during PHP configuration, then the outer $PHP_DTRACE check is true and my new probes will be enabled. I've chosen to define an OCI8 specific macro, HAVE_OCI8_DTRACE, which can be used in the OCI8 source code: diff --git a/ext/oci8/config.m4 b/ext/oci8/config.m4 index 34ae76c..f3e583d 100644 --- a/ext/oci8/config.m4 +++ b/ext/oci8/config.m4 @@ -341,4 +341,17 @@ if test "$PHP_OCI8" != "no"; then PHP_SUBST_OLD(OCI8_ORACLE_VERSION) fi + + if test "$PHP_DTRACE" = "yes"; then + AC_CHECK_HEADERS([sys/sdt.h], [ + PHP_INIT_DTRACE([ext/oci8/oci8_dtrace.d], + [ext/oci8/oci8_dtrace_gen.h],[ext/oci8/oci8.c]) + AC_DEFINE(HAVE_OCI8_DTRACE,1, + [Whether to enable DTrace support for OCI8 ]) + ], [ + AC_MSG_ERROR( + [Cannot find sys/sdt.h which is required for DTrace support]) + ]) + fi + fi In ext/oci8/oci8.c, I added the probes at, for this example, semi-arbitrary places: diff --git a/ext/oci8/oci8.c b/ext/oci8/oci8.c index e2241cf..ffa0168 100644 --- a/ext/oci8/oci8.c +++ b/ext/oci8/oci8.c @@ -1811,6 +1811,12 @@ php_oci_connection *php_oci_do_connect_ex(char *username, int username_len, char } } +#ifdef HAVE_OCI8_DTRACE + if (DTRACE_OCI8_CONNECT_ENABLED()) { + DTRACE_OCI8_CONNECT(username); + } +#endif + /* Initialize global handles if they weren't initialized before */ if (OCI_G(env) == NULL) { php_oci_init_global_handles(TSRMLS_C); @@ -1870,11 +1876,22 @@ php_oci_connection *php_oci_do_connect_ex(char *username, int username_len, char size_t rsize = 0; sword result; +#ifdef HAVE_OCI8_DTRACE + if (DTRACE_OCI8_NLS_START_ENABLED()) { + DTRACE_OCI8_NLS_START(); + } +#endif PHP_OCI_CALL_RETURN(result, OCINlsEnvironmentVariableGet, (&charsetid_nls_lang, 0, OCI_NLS_CHARSET_ID, 0, &rsize)); if (result != OCI_SUCCESS) { charsetid_nls_lang = 0; } smart_str_append_unsigned_ex(&hashed_details, charsetid_nls_lang, 0); + +#ifdef HAVE_OCI8_DTRACE + if (DTRACE_OCI8_NLS_DONE_ENABLED()) { + DTRACE_OCI8_NLS_DONE(); + } +#endif } timestamp = time(NULL); The oci_connect(), oci_pconnect() and oci_new_connect() calls all use php_oci_do_connect_ex() internally. The first probe simply records that the PHP application made a connection call. I already showed a way to do this without needing a probe, but adding a specific probe lets me record the username. The other two probes can be used to time how long the globalization initialization takes. The relationships between the oci8_dtrace.d names like oci8__connect, the probe guards like DTRACE_OCI8_CONNECT_ENABLED() and probe names like DTRACE_OCI8_CONNECT() are obvious after seeing the pattern of all three probes. I included the new header that will be automatically created by the dtrace tool when PHP is built. I did this in ext/oci8/php_oci8_int.h: diff --git a/ext/oci8/php_oci8_int.h b/ext/oci8/php_oci8_int.h index b0d6516..c81fc5a 100644 --- a/ext/oci8/php_oci8_int.h +++ b/ext/oci8/php_oci8_int.h @@ -44,6 +44,10 @@ # endif # endif /* osf alpha */ +#ifdef HAVE_OCI8_DTRACE +#include "oci8_dtrace_gen.h" +#endif + #if defined(min) #undef min #endif Now PHP can be rebuilt: $ cd ~/php-src $ rm configure && ./buildconf --force $ ./configure --disable-all --enable-dtrace \ --with-oci8=instantclient,/home/cjones/instantclient $ make If 'make' fails, do the 'git checkout Zend/zend_dtrace.d' trick I mentioned. The new probes can be seen by logging in as root and running: # stap -l 'process.provider("php").mark("oci8*")' -c 'sapi/cli/php -i' process("sapi/cli/php").provider("php").mark("oci8__connect") process("sapi/cli/php").provider("php").mark("oci8__nls_done") process("sapi/cli/php").provider("php").mark("oci8__nls_start") To test them out, create a new trace file, oci.stp: global numconnects; global start; global numcharlookups = 0; global tottime = 0; probe process.provider("php").mark("oci8-connect") { printf("Connected as %s\n", user_string($arg1)); numconnects += 1; } probe process.provider("php").mark("oci8-nls_start") { start = gettimeofday_us(); numcharlookups++; } probe process.provider("php").mark("oci8-nls_done") { tottime += gettimeofday_us() - start; } probe end { printf("Connects: %d, Charset lookups: %ld\n", numconnects, numcharlookups); printf("Total NLS charset initalization time: %ld usecs/connect\n", (numcharlookups 0 ? tottime/numcharlookups : 0)); } This calculates the average time that the NLS character set lookup takes. It also prints out the username of each connection, as an example of using parameters. Login as root and run Systemtap over the PHP script: # cd ~cjones/php-src # stap -c 'sapi/cli/php ~cjones/test.php' ~cjones/oci.stp Connected as cj <?xml version="1.0"?> <ROWSET> <ROW> <DUMMY>X</DUMMY> </ROW> </ROWSET> Connects: 1, Charset lookups: 1 Total NLS charset initalization time: 164 usecs/connect This shows the time penalty of making OCI8 look up the default character set. This time would be zero if a character set had been passed as the fourth argument to oci_connect() in test.php.

Read the article

How Mary Meeker’s Latest Findings May Make You Re-Imagine Commerce

- by Brenna Johnson-Oracle

0 0 1 954 5439 Endeca Technologies 45 12 6381 14.0 Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:Cambria; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} Today, Mary Meeker released her highly anticipated annual “Internet Trends” presentation for 2014. All 164 slides are jam-packed with pretty much everything you need to know about the state of the Internet. And as luck would have it, Oracle is staying ahead of these trends (but we’ll talk about that later). There were a few surprises, some stats to solidify what you likely already know, and Meeker’s novel observations about where we are all going. What interested me the most is not only how people are engaging in their personal lives, but how they engage with brands. As you could probably predict, Internet usage growth is slowing while tablet user and mobile data traffic growth continue their meteoric rise around the globe, with tremendous growth in underpenetrated markets like China, India, Brazil and Indonesia. Now hold those the “Internet is dead” comments. Keep in mind there’s still plenty of room to grow, and a multiscreen model is Meeker’s vision for our future. Despite 1.5x YOY growth for mobile traffic, mobile still only makes up about 23% of all traffic today. With tablet shipments easily outpacing figures for PCs even at their height (in 2007), mobile will only continue on it’s path, but won’t be everything to everyone. Mobile won’t replace every touchpoint, it’s just created our shorter attention spans and demand for simpler, more personal experiences. As Meeker points out TVs, tablets, PCs, and smartphones are used for different activities at present, but lines will blur (for example, 84% of smartphones owners use their device while watching TV). Day-to-day activities are being re-imagining through simple, beautiful user experiences. It seems like every day I discover a new way a brand/site/app made the most mundane or mounting task enjoyable and frictionless – and I’m not alone. Meeker points out the evolution of how we do everything from how we communicate, get information, use money, meet someone, get places, order a meal, and consume media is all done through new user interfaces that make day-to-day tasks simpler. This movement has caused just about everyone’s patience for a poor UX to take a nosedive. And it’s not just the digital user experience, technology is making a lot of people’s offline lives easier, and less expensive. Today 47% of online shopping utilizes free shipping— nearly half. And Meeker predicts same day local delivery will be the “next big thing” (and you can take a guess on who will own that). Content, Community and Commerce creates the “Internet Trifecta.” Meeker pointed out that when content, communities and commerce occur in a single experience it’s embraced by consumers, which translates to big dollars for brands. The magic happens when consumers can get inspired, research, and buy in a single experience. As the buying cycle has changed and touchpoints (Web, mobile, social, store) are no longer tied to “roles” or steps in the customer journey, brands must make all experiences (content and commerce) available in a single, adaptable experience. (We at Oracle Commerce have a lot to say on this topic – stay tuned!) And in what Meeker calls the “biggest re-imagination of all:” consumers enabled with smartphones and sensors are creating troves of findable and sharable data, which she says is in the early stages, by growing rapidly. She notes that transparency and patterns of consumers with this hardware (FYI - there are up to 10 sensors embedded in smartphones now) has created a Big Data treasure chest to be mined to improve business and the life of the consumer. The opportunities are endless. So what does it all mean for a company doing business online? Start thinking about how you can: Re-imagine your experience. Not your online experience and your mobile experience and your social experience – your overall experience. When consumers can research, buy, and advocate from anywhere (and their attention spans are at an all-time low) channels don’t exist. Enable simple and beautiful interactions informed by all of the online and offline data you leverage across your enterprise. Ethically leverage the endless supply of data (user generated content, clicks, purchases, in-store behavior, social activity) to make experiences more beautiful, more accurate, and more personalized (not to mention, more lucrative for you). Re-imagine content and commerce. Content and commerce must co-exist in a single destination where shoppers can get inspired, explore, research, share, and purchase in a collective experience. Think of how you can deliver an experience where all types of experiences (brand stories and commerce) adapt to every customer need. (Look for more on this topic coming soon). Re-imagine your reach. Look to Meeker’s findings to see how the global appetite for digital experiences is growing, but under-served in many places (i.e.: India, Mexico, Indonesia, Brazil, Philippines, etc.). Growing your online business to a new geography doesn’t have to mean starting from scratch or having an entirely new team manage the new endeavor. Expand using what you’ve already built in a multisite framework, with global language support. And of course, make sure it’s optimized for mobile! Re-imagine the possible. After every Meeker report, I’m always left with the thought “we are just at the beginning.” Everyday there is more data, more possibilities, more online consumers, and more opportunities to use new latest technology to get closer to your customers and be more successful. There’s a lot going on in our Product Development and Product Innovations groups to automate innovation for our customers, so that they can continue to stay ahead of these trends, without disrupting their business. Check out a recent interview with our Innovations Team on some of these new possibilities. Staying on track despite the seemingly endless possibilities out there is the hard part. Prioritizing where you will focus based on your unique brand promise, customer and goals is what you do best. To learn how Oracle Commerce can help your business achieve your goals check out oracle.com/commerce. Check out Meeker’s entire report here.

Read the article

PowerShell Script to Enumerate SharePoint 2010 or 2013 Permissions and Active Directory Group Membership

- by Brian T. Jackett

Originally posted on: http://geekswithblogs.net/bjackett/archive/2013/07/01/powershell-script-to-enumerate-sharepoint-2010-or-2013-permissions-and.aspx In this post I will present a script to enumerate SharePoint 2010 or 2013 permissions across the entire farm down to the site (SPWeb) level. As a bonus this script also recursively expands the membership of any Active Directory (AD) group including nested groups which you wouldn’t be able to find through the SharePoint UI. History Back in 2009 (over 4 years ago now) I published one my most read blog posts about enumerating SharePoint 2007 permissions. I finally got around to updating that script to remove deprecated APIs, supporting the SharePoint 2010 commandlets, and fixing a few bugs. There are 2 things that script did that I had to remove due to major architectural or procedural changes in the script. Indenting the XML output Ability to search for a specific user I plan to add back the ability to search for a specific user but wanted to get this version published first. As for indenting the XML that could be added but would take some effort. If there is user demand for it (let me know in the comments or email me using the contact button at top of blog) I’ll move it up in priorities. As a side note you may also notice that I’m not using the Active Directory commandlets. This was a conscious decision since not all environments have them available. Instead I’m relying on the older [ADSI] type accelerator and APIs. It does add a significant amount of code to the script but it is necessary for compatibility. Hopefully in a few years if I need to update again I can remove that legacy code. Solution Below is the script to enumerate SharePoint 2010 and 2013 permissions down to site level. You can also download it from my SkyDrive account or my posting on the TechNet Script Center Repository. SkyDrive TechNet Script Center Repository http://gallery.technet.microsoft.com/scriptcenter/Enumerate-SharePoint-2010-35976bdb 001 002 003 004 005 006 007 008 009 010 011 012 013 014 015 016 017 018 019 020 021 022 023 024 025 026 027 028 029 030 031 032 033 034 035 036 037 038 039 040 041 042 043 044 045 046 047 048 049 050 051 052 053 054 055 056 057 058 059 060 061 062 063 064 065 066 067 068 069 070 071 072 073 074 075 076 077 078 079 080 081 082 083 084 085 086 087 088 089 090 091 092 093 094 095 096 097 098 099 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 ########################################################### #DisplaySPWebApp8.ps1 # #Author: Brian T. Jackett #Last Modified Date: 2013-07-01 # #Traverse the entire web app site by site to display # hierarchy and users with permissions to site. ########################################################### function Expand-ADGroupMembership { Param ( [Parameter(Mandatory=$true, Position=0)] [string] $ADGroupName, [Parameter(Position=1)] [string] $RoleBinding ) Process { $roleBindingText = "" if(-not [string]::IsNullOrEmpty($RoleBinding)) { $roleBindingText = " RoleBindings=`"$roleBindings`"" } Write-Output "<ADGroup Name=`"$($ADGroupName)`"$roleBindingText>" $domain = $ADGroupName.substring(0, $ADGroupName.IndexOf("\") + 1) $groupName = $ADGroupName.Remove(0, $ADGroupName.IndexOf("\") + 1) #BEGIN - CODE ADAPTED FROM SCRIPT CENTER SAMPLE CODE REPOSITORY #http://www.microsoft.com/technet/scriptcenter/scripts/powershell/search/users/srch106.mspx #GET AD GROUP FROM DIRECTORY SERVICES SEARCH $strFilter = "(&(objectCategory=Group)(name="+($groupName)+"))" $objDomain = New-Object System.DirectoryServices.DirectoryEntry $objSearcher = New-Object System.DirectoryServices.DirectorySearcher $objSearcher.SearchRoot = $objDomain $objSearcher.Filter = $strFilter # specify properties to be returned $colProplist = ("name","member","objectclass") foreach ($i in $colPropList) { $catcher = $objSearcher.PropertiesToLoad.Add($i) } $colResults = $objSearcher.FindAll() #END - CODE ADAPTED FROM SCRIPT CENTER SAMPLE CODE REPOSITORY foreach ($objResult in $colResults) { if($objResult.Properties["Member"] -ne $null) { foreach ($member in $objResult.Properties["Member"]) { $indMember = [adsi] "LDAP://$member" $fullMemberName = $domain + ($indMember.Name) #if($indMember["objectclass"] # if child AD group continue down chain if(($indMember | Select-Object -ExpandProperty objectclass) -contains "group") { Expand-ADGroupMembership -ADGroupName $fullMemberName } elseif(($indMember | Select-Object -ExpandProperty objectclass) -contains "user") { Write-Output "<ADUser>$fullMemberName</ADUser>" } } } } Write-Output "</ADGroup>" } } #end Expand-ADGroupMembership # main portion of script if((Get-PSSnapin -Name microsoft.sharepoint.powershell) -eq $null) { Add-PSSnapin Microsoft.SharePoint.PowerShell } $farm = Get-SPFarm Write-Output "<Farm Guid=`"$($farm.Id)`">" $webApps = Get-SPWebApplication foreach($webApp in $webApps) { Write-Output "<WebApplication URL=`"$($webApp.URL)`" Name=`"$($webApp.Name)`">" foreach($site in $webApp.Sites) { Write-Output "<SiteCollection URL=`"$($site.URL)`">" foreach($web in $site.AllWebs) { Write-Output "<Site URL=`"$($web.URL)`">" # if site inherits permissions from parent then stop processing if($web.HasUniqueRoleAssignments -eq $false) { Write-Output "" } # else site has unique permissions else { foreach($assignment in $web.RoleAssignments) { if(-not [string]::IsNullOrEmpty($assignment.Member.Xml)) { $roleBindings = ($assignment.RoleDefinitionBindings | Select-Object -ExpandProperty name) -join "," # check if assignment is SharePoint Group if($assignment.Member.XML.StartsWith('<Group') -eq "True") { Write-Output "<SPGroup Name=`"$($assignment.Member.Name)`" RoleBindings=`"$roleBindings`">" foreach($SPGroupMember in $assignment.Member.Users) { # if SharePoint group member is an AD Group if($SPGroupMember.IsDomainGroup) { Expand-ADGroupMembership -ADGroupName $SPGroupMember.Name } # else SharePoint group member is an AD User else { # remove claim portion of user login #Write-Output "<ADUser>$($SPGroupMember.UserLogin.Remove(0,$SPGroupMember.UserLogin.IndexOf("|") + 1))</ADUser>" Write-Output "<ADUser>$($SPGroupMember.UserLogin)</ADUser>" } } Write-Output "</SPGroup>" } # else an indivdually listed AD group or user else { if($assignment.Member.IsDomainGroup) { Expand-ADGroupMembership -ADGroupName $assignment.Member.Name -RoleBinding $roleBindings } else { # remove claim portion of user login #Write-Output "<ADUser>$($assignment.Member.UserLogin.Remove(0,$assignment.Member.UserLogin.IndexOf("|") + 1))</ADUser>" Write-Output "<ADUser RoleBindings=`"$roleBindings`">$($assignment.Member.UserLogin)</ADUser>" } } } } } Write-Output "</Site>" $web.Dispose() } Write-Output "</SiteCollection>" $site.Dispose() } Write-Output "</WebApplication>" } Write-Output "</Farm>" The output from the script can be sent to an XML which you can then explore using the [XML] type accelerator. This lets you explore the XML structure however you see fit. See the screenshot below for an example. If you do view the XML output through a text editor (Notepad++ for me) notice the format. Below we see a SharePoint site that has a SharePoint group Demo Members with Edit permissions assigned. Demo Members has an AD group corp\developers as a member. corp\developers has a child AD group called corp\DevelopersSub with 1 AD user in that sub group. As you can see the script recursively expands the AD hierarchy. Conclusion It took me 4 years to finally update this script but I‘m happy to get this published. I was able to fix a number of errors and smooth out some rough edges. I plan to develop this into a more full fledged tool over the next year with more features and flexibility (copy permissions, search for individual user or group, optional enumerate lists / items, etc.). If you have any feedback, feature requests, or issues running it please let me know. Enjoy the script! -Frog Out

Read the article

SQL Server script commands to check if object exists and drop it

- by deadlydog

Over the past couple years I’ve been keeping track of common SQL Server script commands that I use so I don’t have to constantly Google them. Most of them are how to check if a SQL object exists before dropping it. I thought others might find these useful to have them all in one place, so here you go: 1: --=============================== 2: -- Create a new table and add keys and constraints 3: --=============================== 4: IF NOT EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLES WHERE TABLE_NAME = 'TableName' AND TABLE_SCHEMA='dbo') 5: BEGIN 6: CREATE TABLE [dbo].[TableName] 7: ( 8: [ColumnName1] INT NOT NULL, -- To have a field auto-increment add IDENTITY(1,1) 9: [ColumnName2] INT NULL, 10: [ColumnName3] VARCHAR(30) NOT NULL DEFAULT('') 11: ) 12: 13: -- Add the table's primary key 14: ALTER TABLE [dbo].[TableName] ADD CONSTRAINT [PK_TableName] PRIMARY KEY NONCLUSTERED 15: ( 16: [ColumnName1], 17: [ColumnName2] 18: ) 19: 20: -- Add a foreign key constraint 21: ALTER TABLE [dbo].[TableName] WITH CHECK ADD CONSTRAINT [FK_Name] FOREIGN KEY 22: ( 23: [ColumnName1], 24: [ColumnName2] 25: ) 26: REFERENCES [dbo].[Table2Name] 27: ( 28: [OtherColumnName1], 29: [OtherColumnName2] 30: ) 31: 32: -- Add indexes on columns that are often used for retrieval 33: CREATE INDEX IN_ColumnNames ON [dbo].[TableName] 34: ( 35: [ColumnName2], 36: [ColumnName3] 37: ) 38: 39: -- Add a check constraint 40: ALTER TABLE [dbo].[TableName] WITH CHECK ADD CONSTRAINT [CH_Name] CHECK (([ColumnName] >= 0.0000)) 41: END 42: 43: --=============================== 44: -- Add a new column to an existing table 45: --=============================== 46: IF NOT EXISTS (SELECT * FROM INFORMATION_SCHEMA.COLUMNS where TABLE_SCHEMA='dbo' 47: AND TABLE_NAME = 'TableName' AND COLUMN_NAME = 'ColumnName') 48: BEGIN 49: ALTER TABLE [dbo].[TableName] ADD [ColumnName] INT NOT NULL DEFAULT(0) 50: 51: -- Add a description extended property to the column to specify what its purpose is. 52: EXEC sys.sp_addextendedproperty @name=N'MS_Description', 53: @value = N'Add column comments here, describing what this column is for.' , 54: @level0type=N'SCHEMA',@level0name=N'dbo', @level1type=N'TABLE', 55: @level1name = N'TableName', @level2type=N'COLUMN', 56: @level2name = N'ColumnName' 57: END 58: 59: --=============================== 60: -- Drop a table 61: --=============================== 62: IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLES WHERE TABLE_NAME = 'TableName' AND TABLE_SCHEMA='dbo') 63: BEGIN 64: DROP TABLE [dbo].[TableName] 65: END 66: 67: --=============================== 68: -- Drop a view 69: --=============================== 70: IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.VIEWS WHERE TABLE_NAME = 'ViewName' AND TABLE_SCHEMA='dbo') 71: BEGIN 72: DROP VIEW [dbo].[ViewName] 73: END 74: 75: --=============================== 76: -- Drop a column 77: --=============================== 78: IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.COLUMNS where TABLE_SCHEMA='dbo' 79: AND TABLE_NAME = 'TableName' AND COLUMN_NAME = 'ColumnName') 80: BEGIN 81: 82: -- If the column has an extended property, drop it first. 83: IF EXISTS (SELECT * FROM sys.fn_listExtendedProperty(N'MS_Description', N'SCHEMA', N'dbo', N'Table', 84: N'TableName', N'COLUMN', N'ColumnName') 85: BEGIN 86: EXEC sys.sp_dropextendedproperty @name=N'MS_Description', 87: @level0type=N'SCHEMA',@level0name=N'dbo', @level1type=N'TABLE', 88: @level1name = N'TableName', @level2type=N'COLUMN', 89: @level2name = N'ColumnName' 90: END 91: 92: ALTER TABLE [dbo].[TableName] DROP COLUMN [ColumnName] 93: END 94: 95: --=============================== 96: -- Drop Primary key constraint 97: --=============================== 98: IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS WHERE CONSTRAINT_TYPE='PRIMARY KEY' AND TABLE_SCHEMA='dbo' 99: AND TABLE_NAME = 'TableName' AND CONSTRAINT_NAME = 'PK_Name') 100: BEGIN 101: ALTER TABLE [dbo].[TableName] DROP CONSTRAINT [PK_Name] 102: END 103: 104: --=============================== 105: -- Drop Foreign key constraint 106: --=============================== 107: IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS WHERE CONSTRAINT_TYPE='FOREIGN KEY' AND TABLE_SCHEMA='dbo' 108: AND TABLE_NAME = 'TableName' AND CONSTRAINT_NAME = 'FK_Name') 109: BEGIN 110: ALTER TABLE [dbo].[TableName] DROP CONSTRAINT [FK_Name] 111: END 112: 113: --=============================== 114: -- Drop Unique key constraint 115: --=============================== 116: IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS WHERE CONSTRAINT_TYPE='UNIQUE' AND TABLE_SCHEMA='dbo' 117: AND TABLE_NAME = 'TableName' AND CONSTRAINT_NAME = 'UNI_Name') 118: BEGIN 119: ALTER TABLE [dbo].[TableNames] DROP CONSTRAINT [UNI_Name] 120: END 121: 122: --=============================== 123: -- Drop Check constraint 124: --=============================== 125: IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS WHERE CONSTRAINT_TYPE='CHECK' AND TABLE_SCHEMA='dbo' 126: AND TABLE_NAME = 'TableName' AND CONSTRAINT_NAME = 'CH_Name') 127: BEGIN 128: ALTER TABLE [dbo].[TableName] DROP CONSTRAINT [CH_Name] 129: END 130: 131: --=============================== 132: -- Drop a column's Default value constraint 133: --=============================== 134: DECLARE @ConstraintName VARCHAR(100) 135: SET @ConstraintName = (SELECT TOP 1 s.name FROM sys.sysobjects s JOIN sys.syscolumns c ON s.parent_obj=c.id 136: WHERE s.xtype='d' AND c.cdefault=s.id 137: AND parent_obj = OBJECT_ID('TableName') AND c.name ='ColumnName') 138: 139: IF @ConstraintName IS NOT NULL 140: BEGIN 141: EXEC ('ALTER TABLE [dbo].[TableName] DROP CONSTRAINT ' + @ConstraintName) 142: END 143: 144: --=============================== 145: -- Example of how to drop dynamically named Unique constraint 146: --=============================== 147: DECLARE @ConstraintName VARCHAR(100) 148: SET @ConstraintName = (SELECT TOP 1 CONSTRAINT_NAME FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS 149: WHERE CONSTRAINT_TYPE='UNIQUE' AND TABLE_SCHEMA='dbo' 150: AND TABLE_NAME = 'TableName' AND CONSTRAINT_NAME LIKE 'FirstPartOfConstraintName%') 151: 152: IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS WHERE CONSTRAINT_TYPE='UNIQUE' AND TABLE_SCHEMA='dbo' 153: AND TABLE_NAME = 'TableName' AND CONSTRAINT_NAME = @ConstraintName) 154: BEGIN 155: EXEC ('ALTER TABLE [dbo].[TableName] DROP CONSTRAINT ' + @ConstraintName) 156: END 157: 158: --=============================== 159: -- Check for and drop a temp table 160: --=============================== 161: IF OBJECT_ID('tempdb..#TableName') IS NOT NULL DROP TABLE #TableName 162: 163: --=============================== 164: -- Drop a stored procedure 165: --=============================== 166: IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.ROUTINES WHERE ROUTINE_TYPE='PROCEDURE' AND ROUTINE_SCHEMA='dbo' AND 167: ROUTINE_NAME = 'StoredProcedureName') 168: BEGIN 169: DROP PROCEDURE [dbo].[StoredProcedureName] 170: END 171: 172: --=============================== 173: -- Drop a UDF 174: --=============================== 175: IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.ROUTINES WHERE ROUTINE_TYPE='FUNCTION' AND ROUTINE_SCHEMA='dbo' AND 176: ROUTINE_NAME = 'UDFName') 177: BEGIN 178: DROP FUNCTION [dbo].[UDFName] 179: END 180: 181: --=============================== 182: -- Drop an Index 183: --=============================== 184: IF EXISTS (SELECT * FROM SYS.INDEXES WHERE name = 'IndexName') 185: BEGIN 186: DROP INDEX TableName.IndexName 187: END 188: 189: --=============================== 190: -- Drop a Schema 191: --=============================== 192: IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.SCHEMATA WHERE SCHEMA_NAME = 'SchemaName') 193: BEGIN 194: EXEC('DROP SCHEMA SchemaName') 195: END And here’s the same code, just not in the little code view window so that you don’t have to scroll it.--=============================== -- Create a new table and add keys and constraints --=============================== IF NOT EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLES WHERE TABLE_NAME = 'TableName' AND TABLE_SCHEMA='dbo') BEGIN CREATE TABLE [dbo].[TableName] ( [ColumnName1] INT NOT NULL, -- To have a field auto-increment add IDENTITY(1,1) [ColumnName2] INT NULL, [ColumnName3] VARCHAR(30) NOT NULL DEFAULT('') ) -- Add the table's primary key ALTER TABLE [dbo].[TableName] ADD CONSTRAINT [PK_TableName] PRIMARY KEY NONCLUSTERED ( [ColumnName1], [ColumnName2] ) -- Add a foreign key constraint ALTER TABLE [dbo].[TableName] WITH CHECK ADD CONSTRAINT [FK_Name] FOREIGN KEY ( [ColumnName1], [ColumnName2] ) REFERENCES [dbo].[Table2Name] ( [OtherColumnName1], [OtherColumnName2] ) -- Add indexes on columns that are often used for retrieval CREATE INDEX IN_ColumnNames ON [dbo].[TableName] ( [ColumnName2], [ColumnName3] ) -- Add a check constraint ALTER TABLE [dbo].[TableName] WITH CHECK ADD CONSTRAINT [CH_Name] CHECK (([ColumnName] >= 0.0000)) END --=============================== -- Add a new column to an existing table --=============================== IF NOT EXISTS (SELECT * FROM INFORMATION_SCHEMA.COLUMNS where TABLE_SCHEMA='dbo' AND TABLE_NAME = 'TableName' AND COLUMN_NAME = 'ColumnName') BEGIN ALTER TABLE [dbo].[TableName] ADD [ColumnName] INT NOT NULL DEFAULT(0) -- Add a description extended property to the column to specify what its purpose is. EXEC sys.sp_addextendedproperty @name=N'MS_Description', @value = N'Add column comments here, describing what this column is for.' , @level0type=N'SCHEMA',@level0name=N'dbo', @level1type=N'TABLE', @level1name = N'TableName', @level2type=N'COLUMN', @level2name = N'ColumnName' END --=============================== -- Drop a table --=============================== IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLES WHERE TABLE_NAME = 'TableName' AND TABLE_SCHEMA='dbo') BEGIN DROP TABLE [dbo].[TableName] END --=============================== -- Drop a view --=============================== IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.VIEWS WHERE TABLE_NAME = 'ViewName' AND TABLE_SCHEMA='dbo') BEGIN DROP VIEW [dbo].[ViewName] END --=============================== -- Drop a column --=============================== IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.COLUMNS where TABLE_SCHEMA='dbo' AND TABLE_NAME = 'TableName' AND COLUMN_NAME = 'ColumnName') BEGIN -- If the column has an extended property, drop it first. IF EXISTS (SELECT * FROM sys.fn_listExtendedProperty(N'MS_Description', N'SCHEMA', N'dbo', N'Table', N'TableName', N'COLUMN', N'ColumnName') BEGIN EXEC sys.sp_dropextendedproperty @name=N'MS_Description', @level0type=N'SCHEMA',@level0name=N'dbo', @level1type=N'TABLE', @level1name = N'TableName', @level2type=N'COLUMN', @level2name = N'ColumnName' END ALTER TABLE [dbo].[TableName] DROP COLUMN [ColumnName] END --=============================== -- Drop Primary key constraint --=============================== IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS WHERE CONSTRAINT_TYPE='PRIMARY KEY' AND TABLE_SCHEMA='dbo' AND TABLE_NAME = 'TableName' AND CONSTRAINT_NAME = 'PK_Name') BEGIN ALTER TABLE [dbo].[TableName] DROP CONSTRAINT [PK_Name] END --=============================== -- Drop Foreign key constraint --=============================== IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS WHERE CONSTRAINT_TYPE='FOREIGN KEY' AND TABLE_SCHEMA='dbo' AND TABLE_NAME = 'TableName' AND CONSTRAINT_NAME = 'FK_Name') BEGIN ALTER TABLE [dbo].[TableName] DROP CONSTRAINT [FK_Name] END --=============================== -- Drop Unique key constraint --=============================== IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS WHERE CONSTRAINT_TYPE='UNIQUE' AND TABLE_SCHEMA='dbo' AND TABLE_NAME = 'TableName' AND CONSTRAINT_NAME = 'UNI_Name') BEGIN ALTER TABLE [dbo].[TableNames] DROP CONSTRAINT [UNI_Name] END --=============================== -- Drop Check constraint --=============================== IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS WHERE CONSTRAINT_TYPE='CHECK' AND TABLE_SCHEMA='dbo' AND TABLE_NAME = 'TableName' AND CONSTRAINT_NAME = 'CH_Name') BEGIN ALTER TABLE [dbo].[TableName] DROP CONSTRAINT [CH_Name] END --=============================== -- Drop a column's Default value constraint --=============================== DECLARE @ConstraintName VARCHAR(100) SET @ConstraintName = (SELECT TOP 1 s.name FROM sys.sysobjects s JOIN sys.syscolumns c ON s.parent_obj=c.id WHERE s.xtype='d' AND c.cdefault=s.id AND parent_obj = OBJECT_ID('TableName') AND c.name ='ColumnName') IF @ConstraintName IS NOT NULL BEGIN EXEC ('ALTER TABLE [dbo].[TableName] DROP CONSTRAINT ' + @ConstraintName) END --=============================== -- Example of how to drop dynamically named Unique constraint --=============================== DECLARE @ConstraintName VARCHAR(100) SET @ConstraintName = (SELECT TOP 1 CONSTRAINT_NAME FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS WHERE CONSTRAINT_TYPE='UNIQUE' AND TABLE_SCHEMA='dbo' AND TABLE_NAME = 'TableName' AND CONSTRAINT_NAME LIKE 'FirstPartOfConstraintName%') IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS WHERE CONSTRAINT_TYPE='UNIQUE' AND TABLE_SCHEMA='dbo' AND TABLE_NAME = 'TableName' AND CONSTRAINT_NAME = @ConstraintName) BEGIN EXEC ('ALTER TABLE [dbo].[TableName] DROP CONSTRAINT ' + @ConstraintName) END --=============================== -- Check for and drop a temp table --=============================== IF OBJECT_ID('tempdb..#TableName') IS NOT NULL DROP TABLE #TableName --=============================== -- Drop a stored procedure --=============================== IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.ROUTINES WHERE ROUTINE_TYPE='PROCEDURE' AND ROUTINE_SCHEMA='dbo' AND ROUTINE_NAME = 'StoredProcedureName') BEGIN DROP PROCEDURE [dbo].[StoredProcedureName] END --=============================== -- Drop a UDF --=============================== IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.ROUTINES WHERE ROUTINE_TYPE='FUNCTION' AND ROUTINE_SCHEMA='dbo' AND ROUTINE_NAME = 'UDFName') BEGIN DROP FUNCTION [dbo].[UDFName] END --=============================== -- Drop an Index --=============================== IF EXISTS (SELECT * FROM SYS.INDEXES WHERE name = 'IndexName') BEGIN DROP INDEX TableName.IndexName END --=============================== -- Drop a Schema --=============================== IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.SCHEMATA WHERE SCHEMA_NAME = 'SchemaName') BEGIN EXEC('DROP SCHEMA SchemaName') END

Read the article

collision detection problems - Javascript/canvas game

- by Tom Burman

Ok here is a more detailed version of my question. What i want to do: i simply want the have a 2d array to represent my game map. i want a player sprite and i want that sprite to be able to move around my map freely using the keyboard and also have collisions with certain tiles of my map array. i want to use very large maps so i need a viewport. What i have: I have a loop to load the tile images into an array: /Loop to load tile images into an array var mapTiles = []; for (x = 0; x <= 256; x++) { var imageObj = new Image(); // new instance for each image imageObj.src = "images/prototype/"+x+".jpg"; mapTiles.push(imageObj); } I have a 2d array for my game map: //Array to hold map data var board = [ [1,2,3,4,3,4,3,4,5,6,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1], [17,18,19,20,19,20,19,20,21,22,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1], [33,34,35,36,35,36,35,36,37,38,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1], [49,50,51,52,51,52,51,52,53,54,1,1,1,1,1,1,1,1,1,1,1,1,1,197,198,199,1,1,1,1], [65,66,67,68,146,147,67,68,69,70,1,1,1,1,1,1,1,1,216,217,1,1,1,213,214,215,1,1,1,1], [81,82,83,161,162,163,164,84,85,86,1,1,1,1,1,1,1,1,232,233,1,1,1,229,230,231,1,1,1,1], [97,98,99,177,178,179,180,100,101,102,1,1,1,1,59,1,1,1,248,249,1,1,1,245,246,247,1,1,1,1], [1,1,238,1,1,1,1,239,240,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1], [216,217,254,1,1,1,1,255,256,1,204,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1], [232,233,1,1,1,117,118,1,1,1,220,1,1,119,120,1,1,1,1,1,1,1,1,1,1,1,119,120,1,1], [248,249,1,1,1,133,134,1,1,1,1,1,1,135,136,1,1,1,1,1,1,59,1,1,1,1,135,136,1,1], [1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1], [1,1,216,217,1,1,1,1,1,1,60,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1], [1,1,232,233,1,1,1,1,1,1,1,1,1,1,1,1,1,1,204,1,1,1,1,1,1,1,1,1,1,1], [1,1,248,249,1,1,1,1,1,1,1,1,1,1,1,1,1,1,220,1,1,1,1,1,1,216,217,1,1,1], [1,1,1,1,1,1,1,1,1,1,1,1,149,150,151,1,1,1,1,1,1,1,1,1,1,232,233,1,1,1], [12,12,12,12,12,12,12,13,1,1,1,1,165,166,167,1,1,1,1,1,1,119,120,1,1,248,249,1,1,1], [28,28,28,28,28,28,28,29,1,1,1,1,181,182,183,1,1,1,1,1,1,135,136,1,1,1,1,1,1,1], [44,44,44,44,44,15,28,29,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1], [1,1,1,1,1,27,28,29,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1], [1,1,1,1,1,27,28,29,1,1,1,1,1,1,1,1,1,59,1,1,197,198,199,1,1,1,1,119,120,1], [1,1,1,1,1,27,28,29,1,1,216,217,1,1,1,1,1,1,1,1,213,214,215,1,1,1,1,135,136,1], [1,1,1,1,1,27,28,29,1,1,232,233,1,1,1,1,1,1,1,1,229,230,231,1,1,1,1,1,1,1], [1,1,1,1,1,27,28,29,1,1,248,249,1,1,1,1,1,1,1,1,245,246,247,1,1,1,1,1,1,1], [1,1,1,197,198,199,28,29,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1], [1,1,1,213,214,215,28,29,1,1,1,1,1,60,1,1,1,1,204,1,1,1,1,1,1,1,1,1,1,1], [1,1,1,229,230,231,28,29,1,1,1,1,1,1,1,1,1,1,220,1,1,1,1,119,120,1,1,1,1,1], [1,1,1,245,246,247,28,29,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,135,136,1,1,60,1,1], [1,1,1,1,1,27,28,29,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1], [1,1,1,1,1,27,28,29,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1] ]; I have my loop to place the correct tile sin the correct positions: //Loop to place tiles onto screen in correct position for (x = 0; x <= viewWidth; x++){ for (y = 0; y <= viewHeight; y++){ var width = 32; var height = 32; context.drawImage(mapTiles[board[y+viewY][x+viewX]],x*width, y*height); } } I Have my player object : //Place player object context.drawImage(playerImg, (playerX-viewX)*32,(playerY-viewY)*32, 32, 32); I have my viewport setup: //Set viewport pos viewX = playerX - Math.floor(0.5 * viewWidth); if (viewX < 0) viewX = 0; if (viewX+viewWidth > worldWidth) viewX = worldWidth - viewWidth; viewY = playerY - Math.floor(0.5 * viewHeight); if (viewY < 0) viewY = 0; if (viewY+viewHeight > worldHeight) viewY = worldHeight - viewHeight; I have my player movement: canvas.addEventListener('keydown', function(e) { console.log(e); var key = null; switch (e.which) { case 37: // Left if (playerY > 0) playerY--; break; case 38: // Up if (playerX > 0) playerX--; break; case 39: // Right if (playerY < worldWidth) playerY++; break; case 40: // Down if (playerX < worldHeight) playerX++; break; } My Problem: I have my map loading an it looks fine, but my player position thinks it's on a different tile to what it actually is. So for instance, i know that if my player moves left 1 tile, the value of that tile should be 2, but if i print out the value it should be moving to (2), it comes up with a different value. How ive tried to solve the problem: I have tried swap X and Y values for the initialization of my player, for when my map prints. If i swap the x and y values in this part of my code: context.drawImage(mapTiles[board[y+viewY][x+viewX]],x*width, y*height); The map doesnt get draw correctly at all and tiles are placed all in random positions or orientations IF i sway the x and y values for my player in this line : context.drawImage(playerImg, (playerX-viewX)*32,(playerY-viewY)*32, 32, 32); The players movements are inversed, so up and down keys move my player left and right viceversa. My question: Where am i going wrong in my code, and how do i solve it so i have my map looking like it should and my player moving as it should as well as my player returning the correct tileID it is standing on or moving too. Thanks Again ALSO Here is a link to my whole code: prototype

Read the article

«Oracle E-Business Suite: ERP DBA????»??

- by user10821858

????????,???????4????,????????????????????,?????????«Oracle E-Business Suite:ERP DBA????»????????????????????????,??????????????“??”,????????????,???????????,???????????????????,????,????,?????????????????????????,???????????????,????????????????????,??????????,????????????????????????:1.????????????????????2.??DBA???ERP??,??????????3.???????????,?????????????????????ERP??????4.?????????ERP????????5.??????????????ERP????????????6.??ERP???????????????????7.????CIO???ERP???????????8.????????????????????????? ?:?????????????:http://vdisk.weibo.com/s/6X-ze ?:?????:http://product.dangdang.com/product.aspx?product_id=22788613 ?:?????:http://book.360buy.com/11021724.html ?:?????:http://product.china-pub.com/3661378 ?:?????:http://www.amazon.cn/dp/B008BFNAX0 ?:?????:http://detail.tmall.com/item.htm?id=18024644999 ????,?????????????????????????! ? ? ???? ERP ????????????20 ?,?Oracle ??????(E-Business Suite)? ????????ERP ????,????????????????,???????? ????????,????????????? ??ERP ???,?????????????ERP DBA ????????ERP DBA ???????DBA ????????????:ERP DBA ??????????,?? ???ERP ????????,????????????????????????? ?,???????????????????,ERP DBA ????????????? ??????,?Oracle ???????????ERP ??,?????????,?? ???????????,?????????ERP DBA ??????,??????? ????ERP ?????,???????????????? ???????????ERP DBA ?????,?????????????ERP ? ???,???ERP ??????????,????????????????ERP ? ?????????,??????????ERP ????,?????:“?????? ??,????????”,???“????”????????????????,? ??ERP DBA ?????,?????????????,????????????? ???“????”??,?“??????”???,??????????????, ??????,???????????????????“????,??????”, ???????????,??????????????,???????????? ????????,????????????ERP ????,????ERP ???? ????? ?????? ????7 ?,???????3 ?:?????????????? ???(?1 ~ 2 ?):??????Oracle ????????????????? ???????,??????????ERP ???????????????,??? ???? ???(?3 ~ 6 ?):?3 ????Oracle ERP ?????????????;?4 ????Oracle ERP ???????ERP ????;?5 ??????Oracle ????? ??????????????;?6 ?????????????????ERP ???? ??? ?????(?7 ?):????????Oracle ERP ??????????,??? ??????????????????????,???????????????? ?,????????????????????????????????????? ???? ????????????: (1)????,?????????????????????????????? ?,???????????????????,?????????????????? ??????,??????????????????????? (2)???,???,??????,??????????????????Oracle ERP ???????????,????;????????????Oracle ERP ??? ??????????,????? (3)????????,???????????????????????,?? ?????????,???????????????????????????;?? ERP DBA ????????????,????????????????????,? ???????????,????????,???????????? ??????? (1)Oracle ERP ??????????????????ERP ???????? (2)???ERP ?????????DBA ????IT ????? (3)??????????????????? ??????? ?????????????,??????????????,????????? ???????????????????????????????,???????? ??????: E-Mail:longchun.zhu-AT-gmail-DOT-com ?? “?????,?????”,???????????????“?????”??? ?????????????,???????????????????????? ?????????????????,??Mike?Charles???????????, ????????????????????,??????????????????? ??????? ? ? ? ? ?1 ? Oracle ??????/1 1.1 Oracle ?????????????/2 1.2 Oracle ??????R12 /3 1.2.1 R12 ???????/3 1.2.2 R12 ???/4 1.3 ????/5 ?2 ? ERP ????/6 2.1 ERP ??????/7 2.1.1 ERP ??????????/7 2.1.2 ERP ?????????/8 2.1.3 ERP ??????/8 2.2 ??????/9 2.2.1 ????????/9 2.2.2 ???????/11 2.2.3 ?????????/12 2.3 ??ERP ?????????/14 2.3.1 ????/14 2.3.2 ??????/15 2.3.3 ????/16 2.3.4 ?????/19 2.3.5 ????/19 2.3.6 ??????/23 2.3.7 ???????/25 2.3.8 ????/26 2.3.9 ???????/27 2.4 ????/28 2.5 ????/29 ?3 ? Oracle ERP ??/31 3.1 ?????/32 3.1.1 ?????? /32 3.1.2 ????/34 3.1.3 ????/35 3.1.4 ????/37 3.1.5 ?????/37 3.1.6 ??Bug ??/39 3.1.7 ????/40 3.2 Oracle ??????R12 ???/42 3.2.1 ????/42 3.2.2 ???????/43 3.2.3 ????/43 3.2.4 ??????/60 3.3 ??????????????/62 3.3.1 ???????/62 3.3.2 ??DNS ???/63 3.3.3 ????Oracle ??????/63 3.3.4 ?????/64 3.4 ????/66 ?4 ? ??????ERP ????/67 4.1 ???????/68 4.2 ??????/81 4.3 ??????/83 4.4 ??????/85 4.4.1 ??????????/86 4.4.2 ????????????/86 4.4.3 ??????ERP ????/87 4.5 ???????????/89 4.6 ?????/89 4.6.1 ???????/90 4.6.2 ???????/92 4.6.3 ??redo ??/95 4.6.4 ??????/96 4.7 ????/98 4.7.1 ???????/98 4.7.2 ?????/99 4.7.3 ???????/100 4.7.4 ??????/100 4.7.5 ?????/101 4.8 ????????? /101 4.8.1 ????/102 4.8.2 ??DNS ???/102 4.8.3 ??sendmail /103 4.8.4 ??IMAP ??? /104 4.8.5 ??Oracle Alert /104 4.8.6 ??Workflow Mail /110 4.8.7 ???????/115 4.9 ?? Forms Socket ??/121 4.10 ????????/123 4.11 ?????????? /124 4.11.1 ???????/124 4.11.2 ???????/125 4.12 ???? /127 ?5 ? Oracle ???????????/128 5.1 Oracle ????????/129 5.1.1 ???/129 5.1.2 ???/130 5.1.3 ????/131 5.1.4 ????/131 5.2 ????????/131 5.2.1 Oracle ?????????????/131 5.2.2 Oracle ??????????/133 5.3 ??????/134 5.3.1 ???????????????/135 5.3.2 AutoPatch/136 5.3.3 AutoConfig/138 5.4 Rapid Clone/141 5.4.1 ????????????/141 5.4.2 ?????/142 5.4.3 ??????/145 5.4.4 ?Clone ?? /146 5.4.5 ??????????/146 5.4.6 Clone ??/148 5.4.7 Clone ??????? /150 5.4.8 ??Clone/157 5.5 OAM ??/158 5.5.1 OAM ?????/158 5.5.2 OAM ????????/158 5.5.3 ????????/159 5.5.4 ????????????/159 5.5.5 ????????/164 5.5.6 OAM ??????/168 5.6 ????/171 ?6 ? ???????/172 6.1 ??Oracle ??????/173 6.1.1 ??Form ?HTML ??/173 6.1.2 ????????/182 6.1.3 ????/187 6.2 ????/192 6.2.1 ?????/193 6.2.2 ????? /193 6.2.3 ?????/194 6.3 ???????/195 6.4 ?????/205 6.4.1 “??”?????/205 6.4.2 ???????/206 6.4.3 ??? /207 6.4.4 ??????? /208 6.4.5 ????????? /208 6.4.6 ??????/209 6.4.7 ???????/218 6.4.8 ??????/225 6.5 ??????/237 6.5.1 ??????/237 6.5.2 ??????/239 6.6 ????/245 ?7 ? ERP ???????/246 7.1 ERP ??????/247 7.2 ERP ???????/247 7.2.1 ????????/248 7.2.2 ?????????/248 7.2.3 ?????????/249 7.2.4 ???????/249 7.3 ????????/249 7.3.1 ERP ???????/249 7.3.2 ????/251 7.3.3 ????/251 7.3.4 ????/253 7.3.5 ????/255 7.4 ERP ??????/255 7.4.1 ????????/255 7.4.2 ???????/256 7.4.3 ?????????/257 7.5 ?????ERP ??/260 7.5.1 ????????/260 7.5.2 ????/261 7.5.3 ??????/262 7.5.4 ????????/273 7.6 ERP ????/280 7.6.1 ??X-Windows/280 7.6.2 ???????/281 7.6.3 ?????????/281 7.6.4 ??redo ??/282 7.6.5 ??opmn.xml ??/283 7.6.6 ???????/283 7.6.7 ??Apache ??/285 7.6.8 Forms Server socket ????/285 7.6.9 ??Forms Dead Client ??/286 7.6.10 ??Cancel Query /287 7.6.11 ??????????/288 7.6.12 ????????/293 7.6.13 ?? GSM ??/294 7.6.14 ??“ICX:????”/297 7.6.15 ????????/298 7.6.16 ???????/302 7.7 ??????/305 7.7.1 ?????/305 7.7.2 ????/305 7.7.3 ?????/305 7.7.4 ???????/306 7.7.5 ??????/306 7.8 ????????/306 7.8.1 ???CSI Number /307 7.8.2 ???SR /307 7.8.3 TAR ??/307 7.8.4 ????/307 7.9 ????/308

Read the article

RHEL - blocked FC remote port time out: saving binding

- by Dev G

My Server went into a faulty state since the database could not write on the partition. I found out that the partition went into Read Only mode. Finally to fix it, I had to do a hard reboot. Linux 2.6.18-164.el5PAE #1 SMP Tue Aug 18 15:59:11 EDT 2009 i686 i686 i386 GNU/Linux /var/log/messages Oct 31 00:56:45 ota3g1 Had[17275]: VCS ERROR V-16-1-10214 Concurrency Violation:CurrentCount increased above 1 for failover group sg_network Oct 31 00:57:05 ota3g1 Had[17275]: VCS CRITICAL V-16-1-50086 CPU usage on ota3g1.mtsallstream.com is 100% Oct 31 01:01:47 ota3g1 Had[17275]: VCS ERROR V-16-1-10214 Concurrency Violation:CurrentCount increased above 1 for failover group sg_network Oct 31 01:06:50 ota3g1 Had[17275]: VCS ERROR V-16-1-10214 Concurrency Violation:CurrentCount increased above 1 for failover group sg_network Oct 31 01:11:52 ota3g1 Had[17275]: VCS ERROR V-16-1-10214 Concurrency Violation:CurrentCount increased above 1 for failover group sg_network Oct 31 01:12:10 ota3g1 kernel: lpfc 0000:29:00.1: 1:1305 Link Down Event x2 received Data: x2 x20 x80000 x0 x0 Oct 31 01:12:10 ota3g1 kernel: lpfc 0000:29:00.1: 1:1303 Link Up Event x3 received Data: x3 x1 x10 x1 x0 x0 0 Oct 31 01:12:12 ota3g1 kernel: lpfc 0000:29:00.1: 1:1305 Link Down Event x4 received Data: x4 x20 x80000 x0 x0 Oct 31 01:12:40 ota3g1 kernel: rport-8:0-0: blocked FC remote port time out: saving binding Oct 31 01:12:40 ota3g1 kernel: lpfc 0000:29:00.1: 1:(0):0203 Devloss timeout on WWPN 20:25:00:a0:b8:74:f5:65 NPort x0000e4 Data: x0 x7 x0 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 38617577 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 283532153 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 90825 Oct 31 01:12:40 ota3g1 kernel: Aborting journal on device dm-16. Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 868841 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: Aborting journal on device dm-10. Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 37759889 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 283349449 Oct 31 01:12:40 ota3g1 kernel: printk: 6 messages suppressed. Oct 31 01:12:40 ota3g1 kernel: Aborting journal on device dm-12. Oct 31 01:12:40 ota3g1 kernel: EXT3-fs error (device dm-12) in ext3_reserve_inode_write: Journal has aborted Oct 31 01:12:40 ota3g1 kernel: Buffer I/O error on device dm-16, logical block 1545 Oct 31 01:12:40 ota3g1 kernel: lost page write due to I/O error on dm-16 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 12745 Oct 31 01:12:40 ota3g1 kernel: Buffer I/O error on device dm-10, logical block 1545 Oct 31 01:12:40 ota3g1 kernel: EXT3-fs error (device dm-16) in ext3_reserve_inode_write: Journal has aborted Oct 31 01:12:40 ota3g1 kernel: lost page write due to I/O error on dm-10 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 37749121 Oct 31 01:12:40 ota3g1 kernel: Buffer I/O error on device dm-12, logical block 0 Oct 31 01:12:40 ota3g1 kernel: lost page write due to I/O error on dm-12 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: EXT3-fs error (device dm-12) in ext3_dirty_inode: Journal has aborted Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 37757897 Oct 31 01:12:40 ota3g1 kernel: Buffer I/O error on device dm-12, logical block 1097 Oct 31 01:12:40 ota3g1 kernel: lost page write due to I/O error on dm-12 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 283337089 Oct 31 01:12:40 ota3g1 kernel: Buffer I/O error on device dm-16, logical block 0 Oct 31 01:12:40 ota3g1 kernel: lost page write due to I/O error on dm-16 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: EXT3-fs error (device dm-16) in ext3_dirty_inode: Journal has aborted Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 37749121 Oct 31 01:12:40 ota3g1 kernel: Buffer I/O error on device dm-12, logical block 0 Oct 31 01:12:41 ota3g1 kernel: lost page write due to I/O error on dm-12 Oct 31 01:12:41 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:41 ota3g1 kernel: end_request: I/O error, dev sdi, sector 283337089 Oct 31 01:12:41 ota3g1 kernel: Buffer I/O error on device dm-16, logical block 0 Oct 31 01:12:41 ota3g1 kernel: lost page write due to I/O error on dm-16 Oct 31 01:12:41 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/cciss-root 4.9G 730M 3.9G 16% / /dev/mapper/cciss-home 9.7G 1.2G 8.1G 13% /home /dev/mapper/cciss-var 9.7G 494M 8.8G 6% /var /dev/mapper/cciss-usr 15G 2.6G 12G 19% /usr /dev/mapper/cciss-tmp 3.9G 153M 3.6G 5% /tmp /dev/sda1 996M 43M 902M 5% /boot tmpfs 5.9G 0 5.9G 0% /dev/shm /dev/mapper/cciss-product 25G 16G 7.4G 68% /product /dev/mapper/cciss-opt 20G 4.5G 14G 25% /opt /dev/mapper/dg_db1-vol_db1_system 18G 2.2G 15G 14% /database/OTADB/sys /dev/mapper/dg_db1-vol_db1_undo 18G 5.8G 12G 35% /database/OTADB/undo /dev/mapper/dg_db1-vol_db1_redo 8.9G 4.3G 4.2G 51% /database/OTADB/redo /dev/mapper/dg_db1-vol_db1_sgbd 8.9G 654M 7.8G 8% /database/OTADB/admin /dev/mapper/dg_db1-vol_db1_arch 98G 24G 69G 26% /database/OTADB/arch /dev/mapper/dg_db1-vol_db1_indexes 240G 14G 214G 6% /database/OTADB/index /dev/mapper/dg_db1-vol_db1_data 275G 47G 215G 18% /database/OTADB/data /dev/mapper/dg_dbrman-vol_db_rman 8.9G 351M 8.1G 5% /database/RMAN /dev/mapper/dg_app1-vol_app1 151G 113G 31G 79% /files/ota /etc/fstab /dev/cciss/root / ext3 defaults 1 1 /dev/cciss/home /home ext3 defaults 1 2 /dev/cciss/var /var ext3 defaults 1 2 /dev/cciss/usr /usr ext3 defaults 1 2 /dev/cciss/tmp /tmp ext3 defaults 1 2 LABEL=/boot /boot ext3 defaults 1 2 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 /dev/cciss/swap swap swap defaults 0 0 /dev/cciss/product /product ext3 defaults 1 2 /dev/cciss/opt /opt ext3 defaults 1 2 /dev/dg_db1/vol_db1_system /database/OTADB/sys ext3 defaults 1 2 /dev/dg_db1/vol_db1_undo /database/OTADB/undo ext3 defaults 1 2 /dev/dg_db1/vol_db1_redo /database/OTADB/redo ext3 defaults 1 2 /dev/dg_db1/vol_db1_sgbd /database/OTADB/admin ext3 defaults 1 2 /dev/dg_db1/vol_db1_arch /database/OTADB/arch ext3 defaults 1 2 /dev/dg_db1/vol_db1_indexes /database/OTADB/index ext3 defaults 1 2 /dev/dg_db1/vol_db1_data /database/OTADB/data ext3 defaults 1 2 /dev/dg_dbrman/vol_db_rman /database/RMAN ext3 defaults 1 2 /dev/dg_app1/vol_app1 /files/ota ext3 defaults 1 2 Thanks for all the help.

Read the article

My linux server takes more than an hour to boot. Suggestions?

- by jamieb

I am building a CentOS 5.4 system that boots off a compact flash card using a card reader that emulates an IDE drive. It literally takes about an hour to boot. The ultra-slow part occurs when Grub is loading the kernel. Once that's done, the rest of the boot process only takes about a minute to get to a login prompt. Does anyone have any suggestions? I suspect that it may have to do with UDMA. Everything IDE-related in my BIOS seems to checkout. The read performance hdparm is telling me 1.77 MB/s. Ouch! (But even at that rate, it still shouldn't take an hour to decompress and load the kernel) [root@server ~]# hdparm -tT /dev/hdc /dev/hdc: Timing cached reads: 2444 MB in 2.00 seconds = 1222.04 MB/sec Timing buffered disk reads: 6 MB in 3.39 seconds = 1.77 MB/sec Trying to enable DMA is a no-go though: [root@server ~]# hdparm -d1 /dev/hdc /dev/hdc: setting using_dma to 1 (on) HDIO_SET_DMA failed: Operation not permitted using_dma = 0 (off) Here's some command outputs that might help: System [root@server ~]# uname -a Linux server.localdomain 2.6.18-164.el5xen #1 SMP Thu Sep 3 04:47:32 EDT 2009 i686 i686 i386 GNU/Linux PCI info: [root@server ~]# lspci -v 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02) Subsystem: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation 82945G/GZ Integrated Graphics Controller Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at fdf00000 (32-bit, non-prefetchable) [size=512K] I/O ports at ff00 [size=8] Memory at d0000000 (32-bit, prefetchable) [size=256M] Memory at fdf80000 (32-bit, non-prefetchable) [size=256K] Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Capabilities: [d0] Power Management version 2 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 Flags: bus master, medium devsel, latency 0, IRQ 16 I/O ports at fe00 [size=32] 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 Flags: bus master, medium devsel, latency 0, IRQ 17 I/O ports at fd00 [size=32] 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 Flags: bus master, medium devsel, latency 0, IRQ 18 I/O ports at fc00 [size=32] 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 Flags: bus master, medium devsel, latency 0, IRQ 19 I/O ports at fb00 [size=32] 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller Flags: bus master, medium devsel, latency 0, IRQ 16 Memory at fdfff000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fdd00000-00000000fdd00000 Capabilities: [50] #0d [0000] 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) Subsystem: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge Flags: bus master, medium devsel, latency 0 Capabilities: [e0] Vendor Specific Information 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) (prog-if 80 [Master]) Subsystem: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 17 I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at f800 [size=16] Capabilities: [70] Power Management version 2 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) Subsystem: Intel Corporation 82801G (ICH7 Family) SMBus Controller Flags: medium devsel, IRQ 17 I/O ports at 0500 [size=32] 01:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ Flags: bus master, medium devsel, latency 32, IRQ 18 I/O ports at de00 [size=256] Memory at fdeff000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 01:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ Flags: bus master, medium devsel, latency 32, IRQ 17 I/O ports at dc00 [size=256] Memory at fdefe000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 01:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ Flags: bus master, medium devsel, latency 32, IRQ 19 I/O ports at da00 [size=256] Memory at fdefd000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 hdparm ouput: [root@server ~]# hdparm /dev/hdc /dev/hdc: multcount = 0 (off) IO_support = 0 (default 16-bit) unmaskirq = 0 (off) using_dma = 0 (off) keepsettings = 0 (off) readonly = 0 (off) readahead = 256 (on) geometry = 8146/16/63, sectors = 8211168, start = 0 [root@server ~]# hdparm -I /dev/hdc /dev/hdc: ATA device, with non-removable media Model Number: InnoDisk Corp. - iCF4000 4GB Serial Number: 20091023AACA70000753 Firmware Revision: 081107 Standards: Supported: 5 Likely used: 6 Configuration: Logical max current cylinders 8146 8146 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 8211168 LBA user addressable sectors: 8211168 device size with M = 1024*1024: 4009 MBytes device size with M = 1000*1000: 4204 MBytes (4 GB) Capabilities: LBA, IORDY(can be disabled) Standby timer values: spec'd by Vendor R/W multiple sector transfer: Max = 2 Current = 2 DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * Power Management feature set * WRITE_BUFFER command * READ_BUFFER command * NOP cmd * CFA feature set * Mandatory FLUSH_CACHE HW reset results: CBLID- above Vih Device num = 0 CFA power mode 1: enabled and required by some commands Maximum current = 100ma Checksum: correct

Read the article

ssh login successful, but scp password gives me "Permission denied"

- by YANewb

I'm trying to get some blogging software up on an organizational remote server. I tried to set up a SSH Key but was having problems and decided that getting the blog up and running was more important than dealing with the SSH Key issue, so I ssh-keygen -R remoteserver.com. Now I can successfully login with ssh -v [email protected] and the correct password. Once logged in I can move around and read any file and directory that I should be able to read. But when I try to edit an existing -rw-r--r-- file with VIM, it shows up as read-only, if I try to edit permissions I get chmod: file.ext: Operation not permitted, and if I try to scp a new file from my local machine I'm prompted for the remote user's password, and then get scp: /home/path/to/file.ext: Permission denied. Since I didn't have any of these problems before I tried to set up the ssh key, I suspect these anomalies are a side effect of that, but I don't know how to troubleshoot this. So what does a foolish server-newb, such as myself, need to do to get edit capability back as a remote user? Addendum 1: My userids are different between my local machine and the remote server. For ssh I ssh -v [email protected]. if I whoami I get remoteuser For scp I scp file.ext [email protected]:/path/to/file.ext from the local directory with file.ext while logged in as the local user. if I whoami I get localuser The ls -l for two different files I've tried scp: -rw-r--r--@ 1 localuser localgroup 20 Feb 11 21:03 phpinfo.php -rw-r--r-- 1 root localgroup 4 Feb 11 22:32 test.txt The ls -l for the file I've tried to VIM: -rw-r--r-- 1 remoteuser remotegroup 76 Jul 27 2009 info.txt Addendum 2: In the past I've set up ssh-keys for git repositories. I don't want to completely destroy them, so in an attempt to follow a deer's train of thinking I renamed my ~/.ssh/ to ~/.ssh-bak/, then tested the different types of access. The abridged version of the terminal commands and results is below; I think everything is working until the 8th line from the end. localcomputer:~ localuser$ ssh -v [email protected] OpenSSH_5.2p1, OpenSSL 0.9.8l 5 Nov 2009 debug1: Reading configuration data /etc/ssh_config debug1: Connecting to remoteserver.com [###.###.###.###] port 22. debug1: Connection established. debug1: identity file /Users/localuser/.ssh/identity type -1 debug1: identity file /Users/localuser/.ssh/id_rsa type -1 debug1: identity file /Users/localuser/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.8p2 FreeBSD-20110503 debug1: match: OpenSSH_5.8p2 FreeBSD-20110503 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.2 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY The authenticity of host 'remoteserver.com (###.###.###.###)' can't be established. RSA key fingerprint is ##:##:##:##:##:##:##:##:##:##:##:##:##:##:##:##. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added 'remoteserver.com,###.###.###.###' (RSA) to the list of known hosts. debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Trying private key: /Users/localuser/.ssh/identity debug1: Trying private key: /Users/localuser/.ssh/id_rsa debug1: Trying private key: /Users/localuser/.ssh/id_dsa debug1: Next authentication method: password [email protected]'s password: debug1: Authentication succeeded (password). debug1: channel 0: new [client-session] debug1: Requesting [email protected] debug1: Entering interactive session. Last login: Sun Feb 12 18:00:54 2012 from 68.69.164.123 FreeBSD 6.4-RELEASE-p8 (VKERN) #1 r101746: Mon Aug 30 10:34:40 MDT 2010 [remoteuser@remoteserver /home]$ ls -l total ### -rw-r--r-- 1 remoteuser remotegroup 76 Aug 12 2009 info.txt [remoteuser@remoteserver /home]$ vim info.txt ~ {at the bottom of the VIM screen it tells me it's [read only]} [remoteuser@remoteserver /home]$ whoami remoteuser [remoteuser@remoteserver /home]$ logout debug1: client_input_channel_req: channel 0 rtype exit-status reply 0 debug1: client_input_channel_req: channel 0 rtype [email protected] reply 0 debug1: channel 0: free: client-session, nchannels 1 Connection to remoteserver.com closed. Transferred: sent 3872, received 12496 bytes, in 107.4 seconds Bytes per second: sent 36.1, received 116.4 debug1: Exit status 0 localcomputer:localdirectory name$ scp -v phpinfo.php [email protected]:/home/www/remotedirectory/phpinfo.php Executing: program /usr/bin/ssh host remoteserver.com, user remoteuser, command scp -v -t /home/www/remotedirectory/phpinfo.php OpenSSH_5.2p1, OpenSSL 0.9.8l 5 Nov 2009 debug1: Reading configuration data /etc/ssh_config debug1: Connecting to remoteserver.com [###.###.###.###] port 22. debug1: Connection established. debug1: identity file /Users/localuser/.ssh/identity type -1 debug1: identity file /Users/localuser/.ssh/id_rsa type -1 debug1: identity file /Users/localuser/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.8p2 FreeBSD-20110503 debug1: match: OpenSSH_5.8p2 FreeBSD-20110503 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.2 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'remoteserver.com' is known and matches the RSA host key. debug1: Found key in /Users/localuser/.ssh/known_hosts:1 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Trying private key: /Users/localuser/.ssh/identity debug1: Trying private key: /Users/localuser/.ssh/id_rsa debug1: Trying private key: /Users/localuser/.ssh/id_dsa debug1: Next authentication method: password [email protected]'s password: debug1: Authentication succeeded (password). debug1: channel 0: new [client-session] debug1: Requesting [email protected] debug1: Entering interactive session. debug1: Sending command: scp -v -t /home/www/remotedirectory/phpinfo.php Sending file modes: C0644 20 phpinfo.php Sink: C0644 20 phpinfo.php scp: /home/www/remotedirectory/phpinfo.php: Permission denied debug1: client_input_channel_req: channel 0 rtype exit-status reply 0 debug1: channel 0: free: client-session, nchannels 1 debug1: fd 0 clearing O_NONBLOCK debug1: fd 1 clearing O_NONBLOCK Transferred: sent 1456, received 2160 bytes, in 0.6 seconds Bytes per second: sent 2322.3, received 3445.1 debug1: Exit status 1

Read the article

Can't access shared drive when connecting over VPN

- by evolvd

I can ping all network devices but it doesn't seem that DNS is resolving their hostnames. ipconfig/ all is showing that I am pointing to the correct dns server. I can "ping "dnsname"" and it will resolve but it wont resolve any other names. Split tunnel is set up so outside DNS is resolving fine So one issue might be DNS but I have the IP address of the server share so I figure I could just get to it that way. example: \10.0.0.1\ well I can't get to it that way either and I get "the specified network name is no longer available" I can ping it but I can't open the share. Below is the ASA config : ASA Version 8.2(1) ! hostname KG-ASA domain-name example.com names ! interface Vlan1 nameif inside security-level 100 ip address 10.0.0.253 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address dhcp setroute ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive clock timezone EST -5 clock summer-time EDT recurring dns domain-lookup outside dns server-group DefaultDNS name-server 10.0.0.101 domain-name blah.com access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 10000 access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 8333 access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 902 access-list SPLIT-TUNNEL-VPN standard permit 10.0.0.0 255.0.0.0 access-list NONAT extended permit ip 10.0.0.0 255.255.255.0 10.0.1.0 255.255.255.0 pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool IPSECVPN-POOL 10.0.1.2-10.0.1.50 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-621.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list NONAT nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface 10000 10.0.0.101 10000 netmask 255.255.255.255 static (inside,outside) tcp interface 8333 10.0.0.101 8333 netmask 255.255.255.255 static (inside,outside) tcp interface 902 10.0.0.101 902 netmask 255.255.255.255 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa authentication enable console LOCAL aaa authentication http console LOCAL aaa authentication serial console LOCAL aaa authentication ssh console LOCAL aaa authentication telnet console LOCAL http server enable http 10.0.0.0 255.255.0.0 inside http 0.0.0.0 0.0.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set myset esp-aes esp-sha-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map dynmap 1 set transform-set myset crypto dynamic-map dynmap 1 set reverse-route crypto map IPSEC-MAP 65535 ipsec-isakmp dynamic dynmap crypto map IPSEC-MAP interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 65535 authentication pre-share encryption aes hash sha group 2 lifetime 86400 telnet 0.0.0.0 0.0.0.0 inside telnet timeout 5 ssh 0.0.0.0 0.0.0.0 inside ssh 70.60.228.0 255.255.255.0 outside ssh 74.102.150.0 255.255.254.0 outside ssh 74.122.164.0 255.255.252.0 outside ssh timeout 5 console timeout 0 dhcpd dns 10.0.0.101 dhcpd lease 7200 dhcpd domain blah.com ! dhcpd address 10.0.0.110-10.0.0.170 inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept ntp server 63.111.165.21 webvpn enable outside svc image disk0:/anyconnect-win-2.4.1012-k9.pkg 1 svc enable group-policy EASYVPN internal group-policy EASYVPN attributes dns-server value 10.0.0.101 vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn split-tunnel-policy tunnelspecified split-tunnel-network-list value SPLIT-TUNNEL-VPN ! tunnel-group client type remote-access tunnel-group client general-attributes address-pool (inside) IPSECVPN-POOL address-pool IPSECVPN-POOL default-group-policy EASYVPN dhcp-server 10.0.0.253 tunnel-group client ipsec-attributes pre-shared-key * tunnel-group CLIENTVPN type ipsec-l2l tunnel-group CLIENTVPN ipsec-attributes pre-shared-key * ! class-map inspection_default match default-inspection-traffic ! ! policy-map global_policy class inspection_default inspect icmp ! service-policy global_policy global prompt hostname context I'm not sure where I should go next with troubleshooting nslookup result: Default Server: blahname.blah.lan Address: 10.0.0.101

Read the article

Curl, twitter oauth problem

- by Darxval

Does anyone see a problem with the following Curl call / how the Oauth request is built? (i am trying to get a correctly setup request so i can finish my app) So i am calling the following CURL call: C:\>curl -v -k --data-urlencode "status=Testing2" -H "Authorization: OAuth realm='', oauth_nonce=1276107867blah, oauth_timestamp=1276107867, oauth_consumer_key=yJDLH7BDdVi1OKIINSV7Q, oauth_signature_method=HMAC-SHA1, oauth_version=1.0, oauth_signature=NWU4MDdlNjk0OGIxYWQ1YTkyNmU5YjU1NGYyOTczMmU5ZDg5 YWNkNA==, staus=Testing2 " http://twitter.com/statuses/update.xml?status=Testing2 and i recieve this: * About to connect() to twitter.com port 80 (#0) * Trying 168.143.162.68... connected * Connected to twitter.com (168.143.162.68) port 80 (#0) > POST /statuses/update.xml?status=Testing2 HTTP/1.1 > User-Agent: curl/7.20.1 (i386-pc-win32) libcurl/7.20.1 OpenSSL/0.9.8n zlib/1.2.5 libidn/1.18 libssh2/1.2.5 > Host: twitter.com > Accept: */* > Authorization: OAuth realm='', oauth_nonce=1276106370blah, oauth_timestamp=1276106370, oauth_consumer_key=yJDLH7BDdVi1OKIINSV7Q, oauth_signature_method=HMAC-SHA1, oauth_version=1.0, oauth_signature=MjQzNDA1MGU4NGRmMWVjMzUwZmQ4YzE5NzMzY2I1ZDJlOTRkNmQ2Zg==, staus=Testing2 > Content-Length: 15 > Content-Type: application/x-www-form-urlencoded > < HTTP/1.1 401 Unauthorized < Date: Wed, 09 Jun 2010 18:00:22 GMT < Server: hi < Status: 401 Unauthorized < WWW-Authenticate: Basic realm="Twitter API" < X-Runtime: 0.00548 < Content-Type: application/xml; charset=utf-8 < Content-Length: 164 < Cache-Control: no-cache, max-age=1800 < Set-Cookie: k=209.234.229.21.1276106420885412; path=/; expires=Wed, 16-Jun-10 18:00:20 GMT; domain=.twitter.com < Set-Cookie: guest_id=127610642214871948; path=/; expires=Fri, 09 Jul 2010 18:00:22 GMT < Set-Cookie: _twitter_sess=BAh7CDoPY3JlYXRlZF9hdGwrCIm33h0pAToHaWQiJTkyMjllODE0NTdiYWE1%250AMWU1MzBmNjgwMTFiMDhkYjdlIgpmbGFzaElDOidBY3Rpb25Db250cm9sbGVy%250AOjpGbGFzaDo6Rmxhc2hIYXNoewAGOgpAdXNlZHsA--8ebb3c62d461d28f8fda7b8adab642af66969f7e; domain=.twitter.com; path=/ < Expires: Wed, 09 Jun 2010 18:30:20 GMT < Vary: Accept-Encoding < Connection: close < <?xml version="1.0" encoding="UTF-8"?> <hash> <request>/statuses/update.xml?status=Testing2</request> <error>Could not authenticate with OAuth.</error> </hash> * Closing connection #0 my Parameters are setup like so: var parameters = [encodeURIComponent("status="+status),encodeURIComponent("oauth_token="+ac_token),encodeURIComponent("oauth_consumer_key="+"yJDLH7BDdVi1OKIINSV7Q"),encodeURIComponent("oauth_nonce="+nonce,"oauth_signature_method=HMAC-SHA1"),encodeURIComponent("oauth_timestamp="+timestamp),encodeURIComponent("oauth_version=1.0")] var join = parameters.join("&"); var eparamjoin =encodeURIComponent(join); The key is like so: var key=con_secret+"&"+ac_secret; Signature base string is: var signaturebs = "POST&"+encodeURIComponent(url)+"&"+eparamjoin; giving this: POST&http%3A%2F%2Ftwitter.com%2Fstatuses%2Fupdate.xml&status%253DTesting2%26oauth_token%253D142715285-yi2ch324S3zfyKyJby6WDUZOhCsiQuKNUtc3nAGe%26oauth_consumer_key%253DyJDLH7BDdVi1OKIINSV7Q%26oauth_nonce%253D1276107867blah%26oauth_timestamp%253D1276107867%26oauth_version%253D1.0 and signature built like so: var hmac = Crypto.HMAC(Crypto.SHA1, signaturebs,key ); var signature=Base64.encode(hmac); making the signature: NWU4MDdlNjk0OGIxYWQ1YTkyNmU5YjU1NGYyOTczMmU5ZDg5YWNkNA== Any help would be appreciated thank you!

Read the article

How can i add a checkbox for optional files during install? (innosetup)

- by Globulorozzo

i'm trying to make a custom checkbox in my custom page (because is a one page installer), is needed only a checkbox without dialogs or anything, the installer that i'm trying to compile is very linear and simple. i want to bind "FILE3.EXE" on a checkbox in this way: if checkbox is checked copy the file (FILE3.EXE) in DestDir, otherwise if checkbox is unchecked skip the file (FILE3.EXE) during installation. This is the code that i use, obviously the checkbox code is missing because i'm not able to do that [Files] Source: FILE1.EXE; DestDir: {app}; Source: FILE2.EXE; DestDir: {app}; Source: FILE3.EXE; DestDir: {app}; //OPTIONAL [Code] procedure ExitProcess(uExitCode: UINT); external '[email protected] stdcall'; var MainPage : TWizardPage; FolderToInstall : TEdit; InstallLocation : String; procedure CancelClick(Sender: TObject); begin if ExitSetupMsgBox then begin ExitProcess(0); end; end; procedure BrowseClick(Sender : TObject); var Dir : String; begin Dir := FolderToInstall.Text; if BrowseForFolder('Browse',Dir,false) then FolderToInstall.Text := Dir; WizardForm.DirEdit.Text := Dir; end; procedure InitializeWizard(); var LabelFolder : TLabel; begin WizardForm.ClientWidth:=ScaleX(550); WizardForm.ClientHeight:=ScaleY(250); WizardForm.Center; WizardForm.OuterNotebook.Hide; WizardForm.InnerNotebook.Hide; WizardForm.Bevel.hide; Wizardform.NextButton.top := 180; Wizardform.NextButton.Left := 470; WizardForm.NextButton.Height := 25; WizardForm.StatusLabel.Parent := WizardForm; WizardForm.StatusLabel.Left := 6; WizardForm.StatusLabel.Top := 206; WizardForm.FilenameLabel.Parent := WizardForm; WizardForm.FilenameLabel.Left := 87; WizardForm.FilenameLabel.Top := 206; WizardForm.FilenameLabel.Width := ScaleX(383); WizardForm.ProgressGauge.Parent := WizardForm; WizardForm.ProgressGauge.Left :=5; WizardForm.ProgressGauge.Top := 222; WizardForm.ProgressGauge.Width := ScaleX(460); MainPage := CreateCustomPage(wpWelcome,'',''); LabelFolder := TLabel.Create(MainPage); LabelFolder.Parent := WizardForm; LabelFolder.Top := 164; LabelFolder.Left := 6; LabelFolder.Caption := 'Directory:' FolderToInstall := TEdit.Create(MainPage); FolderToInstall.Parent := WizardForm; FolderToInstall.Top := 182; FolderToInstall.Left := 85; FolderToInstall.Width := 380; FolderToInstall.Text := WizardDirValue; FolderToInstall.ReadOnly := True; end;

Read the article

rails gem permissions problem (tabs on rails)

- by aguynamedloren

I'm having trouble running a gem, tabs on rails -v=1.3.2, in my rails 2.3.8 app. The gem is installed locally (Ubuntu 10.10) and I have config.gem "tabs_on_rails", :version="1.3.2" in environment.rb. This is the output I get when I run script/server: loren@ubuntu:~/apps/medmentum$ script/server => Booting WEBrick => Rails 2.3.8 application starting on http://0.0.0.0:3000 no such file to load -- tabs_on_rails /usr/lib/ruby/1.8/rubygems/custom_require.rb:36:in `gem_original_require' /usr/lib/ruby/1.8/rubygems/custom_require.rb:36:in `require' /var/lib/gems/1.8/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:156:in `require' /var/lib/gems/1.8/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:521:in `new_constants_in' /var/lib/gems/1.8/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:156:in `require' /var/lib/gems/1.8/gems/rails-2.3.8/lib/rails/gem_dependency.rb:215:in `load' /var/lib/gems/1.8/gems/rails-2.3.8/lib/initializer.rb:307:in `load_gems' /var/lib/gems/1.8/gems/rails-2.3.8/lib/initializer.rb:307:in `each' /var/lib/gems/1.8/gems/rails-2.3.8/lib/initializer.rb:307:in `load_gems' /var/lib/gems/1.8/gems/rails-2.3.8/lib/initializer.rb:164:in `process' /var/lib/gems/1.8/gems/rails-2.3.8/lib/initializer.rb:113:in `send' /var/lib/gems/1.8/gems/rails-2.3.8/lib/initializer.rb:113:in `run' /home/loren/apps/medmentum/config/environment.rb:11 /usr/lib/ruby/1.8/rubygems/custom_require.rb:31:in `gem_original_require' /usr/lib/ruby/1.8/rubygems/custom_require.rb:31:in `require' /var/lib/gems/1.8/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:156:in `require' /var/lib/gems/1.8/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:521:in `new_constants_in' /var/lib/gems/1.8/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:156:in `require' /var/lib/gems/1.8/gems/rails-2.3.8/lib/commands/server.rb:84 /usr/lib/ruby/1.8/rubygems/custom_require.rb:31:in `gem_original_require' /usr/lib/ruby/1.8/rubygems/custom_require.rb:31:in `require' script/server:3 /var/lib/gems/1.8/gems/rails-2.3.8/lib/rails/plugin.rb:158:in `read': Permission denied - /var/lib/gems/1.8/gems/tabs_on_rails-1.3.2/rails/init.rb (Errno::EACCES) from /var/lib/gems/1.8/gems/rails-2.3.8/lib/rails/plugin.rb:158:in `evaluate_init_rb' from /var/lib/gems/1.8/gems/activesupport-2.3.8/lib/active_support/core_ext/kernel/reporting.rb:11:in `silence_warnings' from /var/lib/gems/1.8/gems/rails-2.3.8/lib/rails/plugin.rb:154:in `evaluate_init_rb' from /var/lib/gems/1.8/gems/rails-2.3.8/lib/rails/plugin.rb:48:in `load' from /var/lib/gems/1.8/gems/rails-2.3.8/lib/rails/plugin/loader.rb:38:in `load_plugins' from /var/lib/gems/1.8/gems/rails-2.3.8/lib/rails/plugin/loader.rb:37:in `each' from /var/lib/gems/1.8/gems/rails-2.3.8/lib/rails/plugin/loader.rb:37:in `load_plugins' from /var/lib/gems/1.8/gems/rails-2.3.8/lib/initializer.rb:369:in `load_plugins' from /var/lib/gems/1.8/gems/rails-2.3.8/lib/initializer.rb:165:in `process' from /var/lib/gems/1.8/gems/rails-2.3.8/lib/initializer.rb:113:in `send' from /var/lib/gems/1.8/gems/rails-2.3.8/lib/initializer.rb:113:in `run' from /home/loren/apps/medmentum/config/environment.rb:11 from /usr/lib/ruby/1.8/rubygems/custom_require.rb:31:in `gem_original_require' from /usr/lib/ruby/1.8/rubygems/custom_require.rb:31:in `require' from /var/lib/gems/1.8/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:156:in `require' from /var/lib/gems/1.8/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:521:in `new_constants_in' from /var/lib/gems/1.8/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:156:in `require' from /var/lib/gems/1.8/gems/rails-2.3.8/lib/commands/server.rb:84 from /usr/lib/ruby/1.8/rubygems/custom_require.rb:31:in `gem_original_require' from /usr/lib/ruby/1.8/rubygems/custom_require.rb:31:in `require' from script/server:3 When I run rake gems:install, I get this: Permission denied - /var/lib/gems/1.8/gems/tabs_on_rails-1.3.2/rails/init.rb I navigated to the tabs_on_rails gem folder in the filesystem and all of the files are locked. According to the files' properties, I am not the owner and cannot change the permissions. All of my other local gems are accessible without permissions problems, so this is odd. Any help is very much appreciated!

Read the article

Problems occurred when invoking code from plug-in: "org.eclipse.jface"

- by user1775376

I've got a new java project at Eclipse from SVN and just tried to open the project in the Eclipce's Project Explorer window and received this error: Problems occurred when invoking code from plug-in: "org.eclipse.jface". I've no idea what's this, can you guys help me? Exception Stack Trace: java.lang.NullPointerException at org.jboss.ide.eclipse.as.classpath.core.ejb3.EJB3ClasspathContainer.getClasspathEntries(EJB3ClasspathContainer.java:115) at org.eclipse.jdt.internal.core.JavaProject.resolveClasspath(JavaProject.java:2695) at org.eclipse.jdt.internal.core.JavaProject.resolveClasspath(JavaProject.java:2853) at org.eclipse.jdt.internal.core.JavaProject.getResolvedClasspath(JavaProject.java:1958) at org.eclipse.jdt.internal.core.PackageFragmentRoot.getRawClasspathEntry(PackageFragmentRoot.java:547) at org.eclipse.jdt.internal.corext.buildpath.ClasspathModifier.isExcluded(ClasspathModifier.java:485) at org.eclipse.jdt.internal.ui.wizards.buildpaths.newsourcepage.IncludeToBuildpathAction.canHandle(IncludeToBuildpathAction.java:170) at org.eclipse.jdt.internal.ui.wizards.buildpaths.newsourcepage.BuildpathModifierAction.selectionChanged(BuildpathModifierAction.java:101) at org.eclipse.jface.viewers.Viewer$2.run(Viewer.java:164) at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42) at org.eclipse.ui.internal.JFaceUtil$1.run(JFaceUtil.java:49) at org.eclipse.jface.util.SafeRunnable.run(SafeRunnable.java:175) at org.eclipse.jface.viewers.Viewer.fireSelectionChanged(Viewer.java:162) at org.eclipse.jface.viewers.StructuredViewer.updateSelection(StructuredViewer.java:2188) at org.eclipse.jface.viewers.StructuredViewer.handleSelect(StructuredViewer.java:1211) at org.eclipse.ui.navigator.CommonViewer.handleSelect(CommonViewer.java:478) at org.eclipse.jface.viewers.StructuredViewer$4.widgetSelected(StructuredViewer.java:1241) at org.eclipse.jface.util.OpenStrategy.fireSelectionEvent(OpenStrategy.java:239) at org.eclipse.jface.util.OpenStrategy.access$4(OpenStrategy.java:233) at org.eclipse.jface.util.OpenStrategy$1.handleEvent(OpenStrategy.java:403) at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84) at org.eclipse.swt.widgets.Display.sendEvent(Display.java:4128) at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1457) at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1480) at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1465) at org.eclipse.swt.widgets.Widget.notifyListeners(Widget.java:1270) at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3974) at org.eclipse.swt.widgets.Display.applicationNextEventMatchingMask(Display.java:4875) at org.eclipse.swt.widgets.Display.applicationProc(Display.java:5226) at org.eclipse.swt.internal.cocoa.OS.objc_msgSendSuper(Native Method) at org.eclipse.swt.widgets.Widget.callSuper(Widget.java:220) at org.eclipse.swt.widgets.Widget.mouseDownSuper(Widget.java:1092) at org.eclipse.swt.widgets.Tree.mouseDownSuper(Tree.java:2052) at org.eclipse.swt.widgets.Widget.mouseDown(Widget.java:1084) at org.eclipse.swt.widgets.Control.mouseDown(Control.java:2528) at org.eclipse.swt.widgets.Tree.mouseDown(Tree.java:2007) at org.eclipse.swt.widgets.Display.windowProc(Display.java:5471) at org.eclipse.swt.internal.cocoa.OS.objc_msgSendSuper(Native Method) at org.eclipse.swt.widgets.Widget.callSuper(Widget.java:220) at org.eclipse.swt.widgets.Widget.windowSendEvent(Widget.java:2095) at org.eclipse.swt.widgets.Shell.windowSendEvent(Shell.java:2253) at org.eclipse.swt.widgets.Display.windowProc(Display.java:5535) at org.eclipse.swt.internal.cocoa.OS.objc_msgSendSuper(Native Method) at org.eclipse.swt.widgets.Display.applicationSendEvent(Display.java:4989) at org.eclipse.swt.widgets.Display.applicationProc(Display.java:5138) at org.eclipse.swt.internal.cocoa.OS.objc_msgSend(Native Method) at org.eclipse.swt.internal.cocoa.NSApplication.sendEvent(NSApplication.java:128) at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3610) at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2701) at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2665) at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2499) at org.eclipse.ui.internal.Workbench$7.run(Workbench.java:679) at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332) at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:668) at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149) at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:123) at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:344) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:622) at org.eclipse.equinox.launcher.Main.basicRun(Main.java:577) at org.eclipse.equinox.launcher.Main.run(Main.java:1410) Session Data: eclipse.buildId=M20120208-0800 java.version=1.6.0_37 java.vendor=Apple Inc. BootLoader constants: OS=macosx, ARCH=x86_64, WS=cocoa, NL=en_US Framework arguments: -product org.eclipse.epp.package.jee.product -keyring /Users/saraiva/.eclipse_keyring -showlocation Command-line arguments: -os macosx -ws cocoa -arch x86_64 -product org.eclipse.epp.package.jee.product -keyring /Users/saraiva/.eclipse_keyring -showlocation

Read the article

Error in running script [closed]

- by SWEngineer

I'm trying to run heathusf_v1.1.0.tar.gz found here I installed tcsh to make build_heathusf work. But, when I run ./build_heathusf, I get the following (I'm running that on a Fedora Linux system from Terminal): $ ./build_heathusf Compiling programs to build a library of image processing functions. convexpolyscan.c: In function ‘cdelete’: convexpolyscan.c:346:5: warning: incompatible implicit declaration of built-in function ‘bcopy’ [enabled by default] myalloc.c: In function ‘mycalloc’: myalloc.c:68:16: error: invalid storage class for function ‘store_link’ myalloc.c: In function ‘mymalloc’: myalloc.c:101:16: error: invalid storage class for function ‘store_link’ myalloc.c: In function ‘myfree’: myalloc.c:129:27: error: invalid storage class for function ‘find_link’ myalloc.c:131:12: warning: assignment makes pointer from integer without a cast [enabled by default] myalloc.c: At top level: myalloc.c:150:13: warning: conflicting types for ‘store_link’ [enabled by default] myalloc.c:150:13: error: static declaration of ‘store_link’ follows non-static declaration myalloc.c:91:4: note: previous implicit declaration of ‘store_link’ was here myalloc.c:164:24: error: conflicting types for ‘find_link’ myalloc.c:131:14: note: previous implicit declaration of ‘find_link’ was here Building the mammogram resizing program. gcc -O2 -I. -I../common mkimage.o -o mkimage -L../common -lmammo -lm ../common/libmammo.a(aggregate.o): In function `aggregate': aggregate.c:(.text+0x7fa): undefined reference to `mycalloc' aggregate.c:(.text+0x81c): undefined reference to `mycalloc' aggregate.c:(.text+0x868): undefined reference to `mycalloc' ../common/libmammo.a(aggregate.o): In function `aggregate_median': aggregate.c:(.text+0xbc5): undefined reference to `mymalloc' aggregate.c:(.text+0xbfb): undefined reference to `mycalloc' aggregate.c:(.text+0xc3c): undefined reference to `mycalloc' ../common/libmammo.a(aggregate.o): In function `aggregate': aggregate.c:(.text+0x9b5): undefined reference to `myfree' ../common/libmammo.a(aggregate.o): In function `aggregate_median': aggregate.c:(.text+0xd85): undefined reference to `myfree' ../common/libmammo.a(optical_density.o): In function `linear_optical_density': optical_density.c:(.text+0x29e): undefined reference to `mymalloc' optical_density.c:(.text+0x342): undefined reference to `mycalloc' optical_density.c:(.text+0x383): undefined reference to `mycalloc' ../common/libmammo.a(optical_density.o): In function `log10_optical_density': optical_density.c:(.text+0x693): undefined reference to `mymalloc' optical_density.c:(.text+0x74f): undefined reference to `mycalloc' optical_density.c:(.text+0x790): undefined reference to `mycalloc' ../common/libmammo.a(optical_density.o): In function `map_with_ushort_lut': optical_density.c:(.text+0xb2e): undefined reference to `mymalloc' optical_density.c:(.text+0xb87): undefined reference to `mycalloc' optical_density.c:(.text+0xbc6): undefined reference to `mycalloc' ../common/libmammo.a(optical_density.o): In function `linear_optical_density': optical_density.c:(.text+0x4d9): undefined reference to `myfree' ../common/libmammo.a(optical_density.o): In function `log10_optical_density': optical_density.c:(.text+0x8f1): undefined reference to `myfree' ../common/libmammo.a(optical_density.o): In function `map_with_ushort_lut': optical_density.c:(.text+0xd0d): undefined reference to `myfree' ../common/libmammo.a(virtual_image.o): In function `deallocate_cached_image': virtual_image.c:(.text+0x3dc6): undefined reference to `myfree' virtual_image.c:(.text+0x3dd7): undefined reference to `myfree' ../common/libmammo.a(virtual_image.o):virtual_image.c:(.text+0x3de5): more undefined references to `myfree' follow ../common/libmammo.a(virtual_image.o): In function `allocate_cached_image': virtual_image.c:(.text+0x4233): undefined reference to `mycalloc' virtual_image.c:(.text+0x4253): undefined reference to `mymalloc' virtual_image.c:(.text+0x4275): undefined reference to `mycalloc' virtual_image.c:(.text+0x42e7): undefined reference to `mycalloc' virtual_image.c:(.text+0x44f9): undefined reference to `mycalloc' virtual_image.c:(.text+0x47a9): undefined reference to `mycalloc' virtual_image.c:(.text+0x4a45): undefined reference to `mycalloc' virtual_image.c:(.text+0x4af4): undefined reference to `myfree' collect2: error: ld returned 1 exit status make: *** [mkimage] Error 1 Building the breast segmentation program. gcc -O2 -I. -I../common breastsegment.o segment.o -o breastsegment -L../common -lmammo -lm breastsegment.o: In function `render_segmentation_sketch': breastsegment.c:(.text+0x43): undefined reference to `mycalloc' breastsegment.c:(.text+0x58): undefined reference to `mycalloc' breastsegment.c:(.text+0x12f): undefined reference to `mycalloc' breastsegment.c:(.text+0x1b9): undefined reference to `myfree' breastsegment.c:(.text+0x1c6): undefined reference to `myfree' breastsegment.c:(.text+0x1e1): undefined reference to `myfree' segment.o: In function `find_center': segment.c:(.text+0x53): undefined reference to `mycalloc' segment.c:(.text+0x71): undefined reference to `mycalloc' segment.c:(.text+0x387): undefined reference to `myfree' segment.o: In function `bordercode': segment.c:(.text+0x4ac): undefined reference to `mycalloc' segment.c:(.text+0x546): undefined reference to `mycalloc' segment.c:(.text+0x651): undefined reference to `mycalloc' segment.c:(.text+0x691): undefined reference to `myfree' segment.o: In function `estimate_tissue_image': segment.c:(.text+0x10d4): undefined reference to `mycalloc' segment.c:(.text+0x14da): undefined reference to `mycalloc' segment.c:(.text+0x1698): undefined reference to `mycalloc' segment.c:(.text+0x1834): undefined reference to `mycalloc' segment.c:(.text+0x1850): undefined reference to `mycalloc' segment.o:segment.c:(.text+0x186a): more undefined references to `mycalloc' follow segment.o: In function `estimate_tissue_image': segment.c:(.text+0x1bbc): undefined reference to `myfree' segment.c:(.text+0x1c4a): undefined reference to `mycalloc' segment.c:(.text+0x1c7c): undefined reference to `mycalloc' segment.c:(.text+0x1d8e): undefined reference to `myfree' segment.c:(.text+0x1d9b): undefined reference to `myfree' segment.c:(.text+0x1da8): undefined reference to `myfree' segment.c:(.text+0x1dba): undefined reference to `myfree' segment.c:(.text+0x1dc9): undefined reference to `myfree' segment.o:segment.c:(.text+0x1dd8): more undefined references to `myfree' follow segment.o: In function `estimate_tissue_image': segment.c:(.text+0x20bf): undefined reference to `mycalloc' segment.o: In function `segment_breast': segment.c:(.text+0x24cd): undefined reference to `mycalloc' segment.o: In function `find_center': segment.c:(.text+0x3a4): undefined reference to `myfree' segment.o: In function `bordercode': segment.c:(.text+0x6ac): undefined reference to `myfree' ../common/libmammo.a(aggregate.o): In function `aggregate': aggregate.c:(.text+0x7fa): undefined reference to `mycalloc' aggregate.c:(.text+0x81c): undefined reference to `mycalloc' aggregate.c:(.text+0x868): undefined reference to `mycalloc' ../common/libmammo.a(aggregate.o): In function `aggregate_median': aggregate.c:(.text+0xbc5): undefined reference to `mymalloc' aggregate.c:(.text+0xbfb): undefined reference to `mycalloc' aggregate.c:(.text+0xc3c): undefined reference to `mycalloc' ../common/libmammo.a(aggregate.o): In function `aggregate': aggregate.c:(.text+0x9b5): undefined reference to `myfree' ../common/libmammo.a(aggregate.o): In function `aggregate_median': aggregate.c:(.text+0xd85): undefined reference to `myfree' ../common/libmammo.a(cc_label.o): In function `cc_label': cc_label.c:(.text+0x20c): undefined reference to `mycalloc' cc_label.c:(.text+0x6c2): undefined reference to `mycalloc' cc_label.c:(.text+0xbaa): undefined reference to `myfree' ../common/libmammo.a(cc_label.o): In function `cc_label_0bkgd': cc_label.c:(.text+0xe17): undefined reference to `mycalloc' cc_label.c:(.text+0x12d7): undefined reference to `mycalloc' cc_label.c:(.text+0x17e7): undefined reference to `myfree' ../common/libmammo.a(cc_label.o): In function `cc_relabel_by_intensity': cc_label.c:(.text+0x18c5): undefined reference to `mycalloc' ../common/libmammo.a(cc_label.o): In function `cc_label_4connect': cc_label.c:(.text+0x1cf0): undefined reference to `mycalloc' cc_label.c:(.text+0x2195): undefined reference to `mycalloc' cc_label.c:(.text+0x26a4): undefined reference to `myfree' ../common/libmammo.a(cc_label.o): In function `cc_relabel_by_intensity': cc_label.c:(.text+0x1b06): undefined reference to `myfree' ../common/libmammo.a(convexpolyscan.o): In function `polyscan_coords': convexpolyscan.c:(.text+0x6f0): undefined reference to `mycalloc' convexpolyscan.c:(.text+0x75f): undefined reference to `mycalloc' convexpolyscan.c:(.text+0x7ab): undefined reference to `myfree' convexpolyscan.c:(.text+0x7b8): undefined reference to `myfree' ../common/libmammo.a(convexpolyscan.o): In function `polyscan_poly_cacheim': convexpolyscan.c:(.text+0x805): undefined reference to `mycalloc' convexpolyscan.c:(.text+0x894): undefined reference to `myfree' ../common/libmammo.a(mikesfileio.o): In function `read_segmentation_file': mikesfileio.c:(.text+0x1e9): undefined reference to `mycalloc' mikesfileio.c:(.text+0x205): undefined reference to `mycalloc' ../common/libmammo.a(optical_density.o): In function `linear_optical_density': optical_density.c:(.text+0x29e): undefined reference to `mymalloc' optical_density.c:(.text+0x342): undefined reference to `mycalloc' optical_density.c:(.text+0x383): undefined reference to `mycalloc' ../common/libmammo.a(optical_density.o): In function `log10_optical_density': optical_density.c:(.text+0x693): undefined reference to `mymalloc' optical_density.c:(.text+0x74f): undefined reference to `mycalloc' optical_density.c:(.text+0x790): undefined reference to `mycalloc' ../common/libmammo.a(optical_density.o): In function `map_with_ushort_lut': optical_density.c:(.text+0xb2e): undefined reference to `mymalloc' optical_density.c:(.text+0xb87): undefined reference to `mycalloc' optical_density.c:(.text+0xbc6): undefined reference to `mycalloc' ../common/libmammo.a(optical_density.o): In function `linear_optical_density': optical_density.c:(.text+0x4d9): undefined reference to `myfree' ../common/libmammo.a(optical_density.o): In function `log10_optical_density': optical_density.c:(.text+0x8f1): undefined reference to `myfree' ../common/libmammo.a(optical_density.o): In function `map_with_ushort_lut': optical_density.c:(.text+0xd0d): undefined reference to `myfree' ../common/libmammo.a(virtual_image.o): In function `deallocate_cached_image': virtual_image.c:(.text+0x3dc6): undefined reference to `myfree' virtual_image.c:(.text+0x3dd7): undefined reference to `myfree' ../common/libmammo.a(virtual_image.o):virtual_image.c:(.text+0x3de5): more undefined references to `myfree' follow ../common/libmammo.a(virtual_image.o): In function `allocate_cached_image': virtual_image.c:(.text+0x4233): undefined reference to `mycalloc' virtual_image.c:(.text+0x4253): undefined reference to `mymalloc' virtual_image.c:(.text+0x4275): undefined reference to `mycalloc' virtual_image.c:(.text+0x42e7): undefined reference to `mycalloc' virtual_image.c:(.text+0x44f9): undefined reference to `mycalloc' virtual_image.c:(.text+0x47a9): undefined reference to `mycalloc' virtual_image.c:(.text+0x4a45): undefined reference to `mycalloc' virtual_image.c:(.text+0x4af4): undefined reference to `myfree' collect2: error: ld returned 1 exit status make: *** [breastsegment] Error 1 Building the mass feature generation program. gcc -O2 -I. -I../common afumfeature.o -o afumfeature -L../common -lmammo -lm afumfeature.o: In function `afum_process': afumfeature.c:(.text+0xd80): undefined reference to `mycalloc' afumfeature.c:(.text+0xd9c): undefined reference to `mycalloc' afumfeature.c:(.text+0xe80): undefined reference to `mycalloc' afumfeature.c:(.text+0x11f8): undefined reference to `myfree' afumfeature.c:(.text+0x1207): undefined reference to `myfree' afumfeature.c:(.text+0x1214): undefined reference to `myfree' ../common/libmammo.a(aggregate.o): In function `aggregate': aggregate.c:(.text+0x7fa): undefined reference to `mycalloc' aggregate.c:(.text+0x81c): undefined reference to `mycalloc' aggregate.c:(.text+0x868): undefined reference to `mycalloc' ../common/libmammo.a(aggregate.o): In function `aggregate_median': aggregate.c:(.text+0xbc5): undefined reference to `mymalloc' aggregate.c:(.text+0xbfb): undefined reference to `mycalloc' aggregate.c:(.text+0xc3c): undefined reference to `mycalloc' ../common/libmammo.a(aggregate.o): In function `aggregate': aggregate.c:(.text+0x9b5): undefined reference to `myfree' ../common/libmammo.a(aggregate.o): In function `aggregate_median': aggregate.c:(.text+0xd85): undefined reference to `myfree' ../common/libmammo.a(convexpolyscan.o): In function `polyscan_coords': convexpolyscan.c:(.text+0x6f0): undefined reference to `mycalloc' convexpolyscan.c:(.text+0x75f): undefined reference to `mycalloc' convexpolyscan.c:(.text+0x7ab): undefined reference to `myfree' convexpolyscan.c:(.text+0x7b8): undefined reference to `myfree' ../common/libmammo.a(convexpolyscan.o): In function `polyscan_poly_cacheim': convexpolyscan.c:(.text+0x805): undefined reference to `mycalloc' convexpolyscan.c:(.text+0x894): undefined reference to `myfree' ../common/libmammo.a(mikesfileio.o): In function `read_segmentation_file': mikesfileio.c:(.text+0x1e9): undefined reference to `mycalloc' mikesfileio.c:(.text+0x205): undefined reference to `mycalloc' ../common/libmammo.a(optical_density.o): In function `linear_optical_density': optical_density.c:(.text+0x29e): undefined reference to `mymalloc' optical_density.c:(.text+0x342): undefined reference to `mycalloc' optical_density.c:(.text+0x383): undefined reference to `mycalloc' ../common/libmammo.a(optical_density.o): In function `log10_optical_density': optical_density.c:(.text+0x693): undefined reference to `mymalloc' optical_density.c:(.text+0x74f): undefined reference to `mycalloc' optical_density.c:(.text+0x790): undefined reference to `mycalloc' ../common/libmammo.a(optical_density.o): In function `map_with_ushort_lut': optical_density.c:(.text+0xb2e): undefined reference to `mymalloc' optical_density.c:(.text+0xb87): undefined reference to `mycalloc' optical_density.c:(.text+0xbc6): undefined reference to `mycalloc' ../common/libmammo.a(optical_density.o): In function `linear_optical_density': optical_density.c:(.text+0x4d9): undefined reference to `myfree' ../common/libmammo.a(optical_density.o): In function `log10_optical_density': optical_density.c:(.text+0x8f1): undefined reference to `myfree' ../common/libmammo.a(optical_density.o): In function `map_with_ushort_lut': optical_density.c:(.text+0xd0d): undefined reference to `myfree' ../common/libmammo.a(virtual_image.o): In function `deallocate_cached_image': virtual_image.c:(.text+0x3dc6): undefined reference to `myfree' virtual_image.c:(.text+0x3dd7): undefined reference to `myfree' ../common/libmammo.a(virtual_image.o):virtual_image.c:(.text+0x3de5): more undefined references to `myfree' follow ../common/libmammo.a(virtual_image.o): In function `allocate_cached_image': virtual_image.c:(.text+0x4233): undefined reference to `mycalloc' virtual_image.c:(.text+0x4253): undefined reference to `mymalloc' virtual_image.c:(.text+0x4275): undefined reference to `mycalloc' virtual_image.c:(.text+0x42e7): undefined reference to `mycalloc' virtual_image.c:(.text+0x44f9): undefined reference to `mycalloc' virtual_image.c:(.text+0x47a9): undefined reference to `mycalloc' virtual_image.c:(.text+0x4a45): undefined reference to `mycalloc' virtual_image.c:(.text+0x4af4): undefined reference to `myfree' collect2: error: ld returned 1 exit status make: *** [afumfeature] Error 1 Building the mass detection program. make: Nothing to be done for `all'. Building the performance evaluation program. gcc -O2 -I. -I../common DDSMeval.o polyscan.o -o DDSMeval -L../common -lmammo -lm ../common/libmammo.a(mikesfileio.o): In function `read_segmentation_file': mikesfileio.c:(.text+0x1e9): undefined reference to `mycalloc' mikesfileio.c:(.text+0x205): undefined reference to `mycalloc' collect2: error: ld returned 1 exit status make: *** [DDSMeval] Error 1 Building the template creation program. gcc -O2 -I. -I../common mktemplate.o polyscan.o -o mktemplate -L../common -lmammo -lm Building the drawimage program. gcc -O2 -I. -I../common drawimage.o -o drawimage -L../common -lmammo -lm ../common/libmammo.a(mikesfileio.o): In function `read_segmentation_file': mikesfileio.c:(.text+0x1e9): undefined reference to `mycalloc' mikesfileio.c:(.text+0x205): undefined reference to `mycalloc' collect2: error: ld returned 1 exit status make: *** [drawimage] Error 1 Building the compression/decompression program jpeg. gcc -O2 -DSYSV -DNOTRUNCATE -c lexer.c lexer.c:41:1: error: initializer element is not constant lexer.c:41:1: error: (near initialization for ‘yyin’) lexer.c:41:1: error: initializer element is not constant lexer.c:41:1: error: (near initialization for ‘yyout’) lexer.c: In function ‘initparser’: lexer.c:387:21: warning: incompatible implicit declaration of built-in function ‘strlen’ [enabled by default] lexer.c: In function ‘MakeLink’: lexer.c:443:16: warning: incompatible implicit declaration of built-in function ‘malloc’ [enabled by default] lexer.c:447:7: warning: incompatible implicit declaration of built-in function ‘exit’ [enabled by default] lexer.c:452:7: warning: incompatible implicit declaration of built-in function ‘exit’ [enabled by default] lexer.c:455:34: warning: incompatible implicit declaration of built-in function ‘calloc’ [enabled by default] lexer.c:458:7: warning: incompatible implicit declaration of built-in function ‘exit’ [enabled by default] lexer.c:460:3: warning: incompatible implicit declaration of built-in function ‘strcpy’ [enabled by default] lexer.c: In function ‘getstr’: lexer.c:548:26: warning: incompatible implicit declaration of built-in function ‘malloc’ [enabled by default] lexer.c:552:4: warning: incompatible implicit declaration of built-in function ‘exit’ [enabled by default] lexer.c:557:21: warning: incompatible implicit declaration of built-in function ‘calloc’ [enabled by default] lexer.c:557:28: warning: incompatible implicit declaration of built-in function ‘strlen’ [enabled by default] lexer.c:561:7: warning: incompatible implicit declaration of built-in function ‘exit’ [enabled by default] lexer.c: In function ‘parser’: lexer.c:794:21: warning: incompatible implicit declaration of built-in function ‘calloc’ [enabled by default] lexer.c:798:8: warning: incompatible implicit declaration of built-in function ‘exit’ [enabled by default] lexer.c:1074:21: warning: incompatible implicit declaration of built-in function ‘calloc’ [enabled by default] lexer.c:1078:8: warning: incompatible implicit declaration of built-in function ‘exit’ [enabled by default] lexer.c:1116:21: warning: incompatible implicit declaration of built-in function ‘calloc’ [enabled by default] lexer.c:1120:8: warning: incompatible implicit declaration of built-in function ‘exit’ [enabled by default] lexer.c:1154:25: warning: incompatible implicit declaration of built-in function ‘calloc’ [enabled by default] lexer.c:1158:5: warning: incompatible implicit declaration of built-in function ‘exit’ [enabled by default] lexer.c:1190:5: warning: incompatible implicit declaration of built-in function ‘exit’ [enabled by default] lexer.c:1247:25: warning: incompatible implicit declaration of built-in function ‘calloc’ [enabled by default] lexer.c:1251:5: warning: incompatible implicit declaration of built-in function ‘exit’ [enabled by default] lexer.c:1283:5: warning: incompatible implicit declaration of built-in function ‘exit’ [enabled by default] lexer.c: In function ‘yylook’: lexer.c:1867:9: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] lexer.c:1867:20: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] lexer.c:1877:12: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] lexer.c:1877:23: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] make: *** [lexer.o] Error 1

Read the article

Having trouble getting cucumber 6.3 to run on rails 2.3.4

- by Yak

Hi, I am trying to to get cucumber to run with no luck. Here is the error I am seeing: cucumber features Using the default profile... no such file to load -- test/ (MissingSourceFile) /Library/Ruby/Site/1.8/rubygems/custom_require.rb:31:in gem_original_require' /Library/Ruby/Site/1.8/rubygems/custom_require.rb:31:in polyglot_original_require' /Library/Ruby/Gems/1.8/gems/polyglot-0.3.0/lib/polyglot.rb:65:in require' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.4/lib/active_support/dependencies.rb:158:in require' /Users/yakovrabinovich/Starstreet/starstreet/vendor/gems/cucumber-0.6.3/bin/../lib/cucumber/rails/world.rb:11 /Library/Ruby/Site/1.8/rubygems/custom_require.rb:31:in gem_original_require' /Library/Ruby/Site/1.8/rubygems/custom_require.rb:31:in polyglot_original_require' /Library/Ruby/Gems/1.8/gems/polyglot-0.3.0/lib/polyglot.rb:65:in require' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.4/lib/active_support/dependencies.rb:158:in require' /Library/Ruby/Gems/1.8/gems/cucumber-rails-0.3.0/lib/cucumber/rails/rspec.rb:1 /Library/Ruby/Site/1.8/rubygems/custom_require.rb:31:in gem_original_require' /Library/Ruby/Site/1.8/rubygems/custom_require.rb:31:in polyglot_original_require' /Library/Ruby/Gems/1.8/gems/polyglot-0.3.0/lib/polyglot.rb:65:in require' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.4/lib/active_support/dependencies.rb:158:in require' /Users/yakovrabinovich/Starstreet/starstreet/features/support/env.rb:11 /Library/Ruby/Site/1.8/rubygems/custom_require.rb:31:in gem_original_require' /Library/Ruby/Site/1.8/rubygems/custom_require.rb:31:in polyglot_original_require' /Library/Ruby/Gems/1.8/gems/polyglot-0.3.0/lib/polyglot.rb:65:in require' /Library/Ruby/Gems/1.8/gems/cucumber-0.6.3/bin/../lib/cucumber/rb_support/rb_language.rb:124:in load_code_file' /Library/Ruby/Gems/1.8/gems/cucumber-0.6.3/bin/../lib/cucumber/step_mother.rb:85:in load_code_file' /Library/Ruby/Gems/1.8/gems/cucumber-0.6.3/bin/../lib/cucumber/step_mother.rb:77:in load_code_files' /Library/Ruby/Gems/1.8/gems/cucumber-0.6.3/bin/../lib/cucumber/step_mother.rb:76:in each' /Library/Ruby/Gems/1.8/gems/cucumber-0.6.3/bin/../lib/cucumber/step_mother.rb:76:in load_code_files' /Library/Ruby/Gems/1.8/gems/cucumber-0.6.3/bin/../lib/cucumber/cli/main.rb:48:in execute!' /Library/Ruby/Gems/1.8/gems/cucumber-0.6.3/bin/../lib/cucumber/cli/main.rb:20:in execute' /Library/Ruby/Gems/1.8/gems/cucumber-0.6.3/bin/cucumber:8 /usr/bin/cucumber:19:in `load' /usr/bin/cucumber:19 Here are my gems: Yakov-Rabinovichs-MacBook:1.8 yakovrabinovich$ gem list * LOCAL GEMS * aasm (2.1.3) acl9 (0.11.0) actionmailer (2.3.4, 2.2.2, 1.3.6) actionpack (2.3.4, 2.2.2, 1.13.6) actionwebservice (1.2.6) activerecord (2.3.4, 2.2.2, 1.15.6) activeresource (2.3.4, 2.2.2) activesupport (2.3.4, 2.2.2, 1.4.4) acts_as_ferret (0.4.3) authlogic (2.1.3) bgetting-hominid (1.2.0) builder (2.1.2) capistrano (2.5.2) capistrano-ext (1.2.1) cgi_multipart_eof_fix (2.5.0) chronic (0.2.3) columnize (0.3.1) configatron (2.5.1) cucumber (0.6.3) cucumber-rails (0.3.0) daemons (1.0.10) database_cleaner (0.5.0) diff-lcs (1.1.2) dnssd (0.6.0) factory_girl (1.2.3) fastthread (1.0.1) fcgi (0.8.7) ferret (0.11.6) gem_plugin (0.2.3) gemcutter (0.4.1) highline (1.5.0) hoe (2.5.0) hominid (2.1.0) hpricot (0.6.164) json (1.2.0) json_pure (1.2.0) libxml-ruby (1.1.2) linecache (0.43) mocha (0.9.8) mongrel (1.1.5) needle (1.3.0) net-scp (1.0.1) net-sftp (2.0.1, 1.1.1) net-ssh (2.0.16, 2.0.4, 1.1.4) net-ssh-gateway (1.0.0) nokogiri (1.4.1) oauth (0.3.6) pg (0.8.0) polyglot (0.3.0) rack (1.0.1) rack-test (0.5.3) rails (2.3.4, 2.2.2, 1.2.6) rake (0.8.7, 0.8.3) RedCloth (4.1.1) rspec (1.3.0) rspec-rails (1.3.2) ruby-debug (0.10.3) ruby-debug-base (0.10.3) ruby-hmac (0.4.0) ruby-openid (2.1.2) ruby-yadis (0.3.4) rubyforge (2.0.3) rubygems-update (1.3.5) rubynode (0.1.5) sqlite3-ruby (1.2.4) term-ansicolor (1.0.4) termios (0.9.4) test-unit (1.2.3) thoughtbot-factory_girl (1.2.2) thoughtbot-shoulda (2.10.2) treetop (1.4.4) whenever (0.4.1) will_paginate (2.3.11) xmpp4r (0.4) yamler (0.1.0) Any help would be greatly appreciated!

Read the article

JPA thinks I'm deleting a detached object

- by Steve

So, I've got a DAO that I used to load and save my domain objects using JPA. I finally managed to get the transaction stuff working (with a bunch of help from the folks here...), now I've got another issue. In my test case, I call my DAO to load a domain object with a given id, check that it got loaded and then call the same DAO to delete the object I just loaded. When I do that I get the following: java.lang.IllegalArgumentException: Removing a detached instance mil.navy.ndms.conops.common.model.impl.jpa.Group#10 at org.hibernate.ejb.event.EJB3DeleteEventListener.performDetachedEntityDeletionCheck(EJB3DeleteEventListener.java:45) at org.hibernate.event.def.DefaultDeleteEventListener.onDelete(DefaultDeleteEventListener.java:108) at org.hibernate.event.def.DefaultDeleteEventListener.onDelete(DefaultDeleteEventListener.java:74) at org.hibernate.impl.SessionImpl.fireDelete(SessionImpl.java:794) at org.hibernate.impl.SessionImpl.delete(SessionImpl.java:772) at org.hibernate.ejb.AbstractEntityManagerImpl.remove(AbstractEntityManagerImpl.java:253) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:48) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37) at java.lang.reflect.Method.invoke(Method.java:600) at org.springframework.orm.jpa.SharedEntityManagerCreator$SharedEntityManagerInvocationHandler.invoke(SharedEntityManagerCreator.java:180) at $Proxy27.remove(Unknown Source) at mil.navy.ndms.conops.common.dao.impl.jpa.GroupDao.delete(GroupDao.java:499) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:48) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37) at java.lang.reflect.Method.invoke(Method.java:600) at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:304) at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182) at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149) at org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:106) at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171) at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204) at $Proxy28.delete(Unknown Source) at mil.navy.ndms.conops.common.dao.impl.jpa.GroupDaoTest.testGroupDaoSave(GroupDaoTest.java:89) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:48) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37) at java.lang.reflect.Method.invoke(Method.java:600) at junit.framework.TestCase.runTest(TestCase.java:164) at junit.framework.TestCase.runBare(TestCase.java:130) at junit.framework.TestResult$1.protect(TestResult.java:106) at junit.framework.TestResult.runProtected(TestResult.java:124) at junit.framework.TestResult.run(TestResult.java:109) at junit.framework.TestCase.run(TestCase.java:120) at junit.framework.TestSuite.runTest(TestSuite.java:230) at junit.framework.TestSuite.run(TestSuite.java:225) at org.eclipse.jdt.internal.junit.runner.junit3.JUnit3TestReference.run(JUnit3TestReference.java:130) at org.eclipse.jdt.internal.junit.runner.TestExecution.run(TestExecution.java:38) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:460) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:673) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.java:386) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner.java:196) Now given that I'm using the same DAO instance, and I've not changed EntityManagers (unless Spring does so without letting me know), how can this be a detached object? My DAO code looks like this: public class GenericJPADao implements IWebDao, IDao, IDaoUtil { private static Logger logger = Logger.getLogger (GenericJPADao.class); protected Class voClass; @PersistenceContext(unitName = "CONOPS_PU") protected EntityManagerFactory emf; @PersistenceContext(unitName = "CONOPS_PU") protected EntityManager em; public GenericJPADao() { super ( ); ParameterizedType genericSuperclass = (ParameterizedType) getClass ( ).getGenericSuperclass ( ); this.voClass = (Class) genericSuperclass.getActualTypeArguments ( )[1]; } ... public void delete (INTFC modelObj, EntityManager em) { em.remove (modelObj); } @SuppressWarnings("unchecked") public INTFC findById (Long id) { return ((INTFC) em.find (voClass, id)); } } The test case code looks like: IGroup loadedGroup = dao.findById (group.getId ( )); assertNotNull (loadedGroup); assertEquals (group.getId ( ), loadedGroup.getId ( )); dao.delete (loadedGroup); // - This generates the above exception loadedGroup = dao.findById (group.getId ( )); assertNull(loadedGroup); Can anyone tell me what I'm doing wrong here? Thanks

Read the article

Getting java.lang.ClassNotFoundException: com.mysql.jdbc.Driver Exception

- by Yashwant Chavan

Hi , I am getting Following Exception while configuring the Connection Pool in Tomcat This is Context.xml <Context path="/DBTest" docBase="DBTest" debug="5" reloadable="true" crossContext="true">       <Resource name="jdbc/TestDB" auth="Container" type="javax.sql.DataSource" maxActive="100" maxIdle="30" maxWait="10000" username="root" password="password" driverClassName="com.mysql.jdbc.Driver" url="jdbc:mysql:///BUSINESS"/> </Context> This is Bean Entry <bean id="dataSource" class="org.springframework.jndi.JndiObjectFactoryBean"> <property name="jndiName" value="jdbc/TestDB"></property> <property name="resourceRef" value="true"></property> </bean> org.springframework.jdbc.CannotGetJdbcConnectionException: Could not get JDBC Co nnection; nested exception is org.apache.tomcat.dbcp.dbcp.SQLNestedException: Ca nnot load JDBC driver class 'com.mysql.jdbc.Driver' at org.springframework.jdbc.datasource.DataSourceUtils.getConnection(Dat aSourceUtils.java:82) at org.springframework.jdbc.core.JdbcTemplate.execute(JdbcTemplate.java: 382) at org.springframework.jdbc.core.JdbcTemplate.query(JdbcTemplate.java:45 8) at org.springframework.jdbc.core.JdbcTemplate.query(JdbcTemplate.java:46 6) at com.businesscaliber.dao.Dao.getQueryForListMap(Dao.java:66) at com.businesscaliber.dao.MiscellaneousDao.getDefaultSucessStory(Miscel laneousDao.java:109) at com.businesscaliber.listeners.BusinessContextLoader.contextInitialize d(BusinessContextLoader.java:40) at org.apache.catalina.core.StandardContext.listenerStart(StandardContex t.java:3795) at org.apache.catalina.core.StandardContext.start(StandardContext.java:4 252) at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase .java:760) at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:74 0) at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:544) at org.apache.catalina.startup.HostConfig.deployWAR(HostConfig.java:831) at org.apache.catalina.startup.HostConfig.deployWARs(HostConfig.java:720 ) at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:490 ) at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1150) at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java :311) at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(Lifecycl eSupport.java:120) at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1022) at org.apache.catalina.core.StandardHost.start(StandardHost.java:736) at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014) at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443 ) at org.apache.catalina.core.StandardService.start(StandardService.java:4 48) at org.apache.catalina.core.StandardServer.start(StandardServer.java:700 ) at org.apache.catalina.startup.Catalina.start(Catalina.java:552) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl. java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces sorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:295) at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:433) Caused by: org.apache.tomcat.dbcp.dbcp.SQLNestedException: Cannot load JDBC driv er class 'com.mysql.jdbc.Driver' at org.apache.tomcat.dbcp.dbcp.BasicDataSource.createDataSource(BasicDat aSource.java:1136) at org.apache.tomcat.dbcp.dbcp.BasicDataSource.getConnection(BasicDataSo urce.java:880) at org.springframework.jdbc.datasource.DataSourceUtils.doGetConnection(D ataSourceUtils.java:113) at org.springframework.jdbc.datasource.DataSourceUtils.getConnection(Dat aSourceUtils.java:79) ... 30 more Caused by: java.lang.ClassNotFoundException: com.mysql.jdbc.Driver at java.net.URLClassLoader$1.run(URLClassLoader.java:200) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:188) at java.lang.ClassLoader.loadClass(ClassLoader.java:306) at java.lang.ClassLoader.loadClass(ClassLoader.java:251) at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319) at java.lang.Class.forName0(Native Method) at java.lang.Class.forName(Class.java:164) at org.apache.tomcat.dbcp.dbcp.BasicDataSource.createDataSource(BasicDat aSource.java:1130)

Read the article

Rails 3.0.3 and Polyglot Gem problem

- by user557417

Hello all. I hope you can help me. I had a rails app running locally, and also uploaded and running on Heroku. All was well. Last week, I started work again and ran into a snag. At the beginning of my day, I opened up Terminal and ran 'rails s' to start the local server. I received this error: doug-naegeles-macbook-pro-17:elig_check dougnaegele$ rails s /Library/Ruby/Gems/1.8/gems/bundler-1.0.7/lib/bundler/resolver.rb:129:in resolve': Could not find gem 'polyglot', required by 'rails (= 3.0.3)', in any of the sources (Bundler::VersionConflict) from /Library/Ruby/Gems/1.8/gems/bundler-1.0.7/lib/bundler/resolver.rb:127:incatch' from /Library/Ruby/Gems/1.8/gems/bundler-1.0.7/lib/bundler/resolver.rb:127:in resolve' from /Library/Ruby/Gems/1.8/gems/bundler-1.0.7/lib/bundler/definition.rb:151:inresolve' from /Library/Ruby/Gems/1.8/gems/bundler-1.0.7/lib/bundler/definition.rb:90:in specs' from /Library/Ruby/Gems/1.8/gems/bundler-1.0.7/lib/bundler/definition.rb:135:inspecs_for' from /Library/Ruby/Gems/1.8/gems/bundler-1.0.7/lib/bundler/definition.rb:124:in requested_specs' from /Library/Ruby/Gems/1.8/gems/bundler-1.0.7/lib/bundler/environment.rb:23:inrequested_specs' from /Library/Ruby/Gems/1.8/gems/bundler-1.0.7/lib/bundler/runtime.rb:11:in setup' from /Library/Ruby/Gems/1.8/gems/bundler-1.0.7/lib/bundler.rb:100:insetup' from /Users/dougnaegele/Sites/elig_check/config/boot.rb:8 from script/rails:5:in `require' from script/rails:5 When I run 'gem list'..i can see Polyglot listed: doug-naegeles-macbook-pro-17:elig_check dougnaegele$ gem list * LOCAL GEMS * abstract (1.0.0) actionmailer (3.0.3, 2.3.5, 2.2.2, 1.3.6) actionpack (3.0.3, 2.3.5, 2.2.2, 1.13.6) actionwebservice (1.2.6) activemodel (3.0.3) activerecord (3.0.3, 2.3.5, 2.2.2, 1.15.6) activeresource (3.0.3, 2.3.5, 2.2.2) activesupport (3.0.3, 2.3.5, 2.2.2, 1.4.4) acts_as_ferret (0.5.2, 0.4.3) arel (2.0.6, 2.0.4) authlogic (2.1.6) blythedunham-sms_on_rails (0.1.0) builder (3.0.0, 2.1.2) bundler (1.0.7) capistrano (2.5.19, 2.5.2) cgi_multipart_eof_fix (2.5.0) color (1.4.1) configuration (1.2.0) crack (0.1.8) daemons (1.1.0, 1.0.10) derailed-ziya (2.1.5) dnssd (1.4, 0.6.0) erubis (2.6.6) fastthread (1.0.7, 1.0.1) fcgi (0.8.8, 0.8.7) ferret (0.11.6) gem_plugin (0.2.3) googlecharts (1.6.0) heroku (1.14.10, 1.14.3) highline (1.6.1, 1.5.0) hpricot (0.8.3, 0.6.164) httparty (0.6.1) i18n (0.5.0, 0.4.2) jk-ferret (0.11.8.2) json_pure (1.4.6) launchy (0.3.7) libxml-ruby (1.1.4, 1.1.2) little-plugger (1.1.2) logging (1.4.3) mail (2.2.12, 2.2.10) mattetti-googlecharts (1.4.0) mime-types (1.16) mongrel (1.1.5) mysql (2.8.1) needle (1.3.0) net-scp (1.0.4, 1.0.1) net-sftp (2.0.5, 2.0.1, 1.1.1) net-ssh (2.0.23, 2.0.4, 1.1.4) net-ssh-gateway (1.0.1, 1.0.0) nifty-generators (0.4.2) polyglot (0.3.1) rack (1.2.1, 1.0.1) rack-mount (0.6.13) rack-test (0.5.6) rails (3.0.3, 2.3.5, 2.2.2, 1.2.6) railties (3.0.3) rake (0.8.7, 0.8.3) RedCloth (4.2.3, 4.1.1) rest-client (1.6.1) ruby-openid (2.1.8, 2.1.2) ruby-yadis (0.3.4) rubygems-update (1.3.7, 1.3.6) rubynode (0.1.5) sequel (3.18.0, 3.17.0) sinatra (1.1.0, 1.0) sqlite3-ruby (1.3.2, 1.2.5, 1.2.4) static_record_cache (0.2.0) taps (0.3.14) termios (0.9.4) thor (0.14.6) tilt (1.1) treetop (1.4.9) twilio (2.9.0) twiliolib (2.0.7) tzinfo (0.3.23) xmpp4r (0.5, 0.4) When I run 'gem sources' I get this: doug-naegeles-macbook-pro-17:elig_check dougnaegele$ gem sources * CURRENT SOURCES * rubygems.org/ gems.github.com gems.github.com gems.github.com/ gems.github.com gems.rubyforge.org Which looks right -- that's where Polyglot lives. When I run 'bundle install' I get this: doug-naegeles-macbook-pro-17:elig_check dougnaegele$ bundle install Fetching source index for http://rubygems.org/ Could not find gem 'polyglot', required by 'rails (= 3.0.3)', in any of the sources Any idea? I've tried to reinstall the gem, run 'bundle install' etc. No luck. (I have a suspicion that this - rails (3.0.3, 2.3.5, 2.2.2, 1.2.6) may be the problem, but I don't want to go down that road just yet. I have apps running on 2.3.5 that have not been refactored for rails 3.0) Thanks in advance! Doug

Read the article

Maven/Spring/Java: ClassNotFoundException - but I know class is there...

- by wuntee

I have 2 maven projects set up like this: -com.wuntee.rsaAuthenticationManager (jar) -com.wuntee.taac (pom) --taac-backend-gui (jar) --taac-web (war) And 'com.wuntee.rsaAuthenticationManager' is a dep in 'taac-backend-gui'. When running a test case in taac-backend-gui, everything executes fine, but when trying to start the taac-web, I get the following ClassNotFoundException - the library that contains the class 'weblogic.security.SSL.TrustManager' is also in my local maven repository, and set as a dependency of com.wuntee.rsaAuthenticationManager. Does anyone know why I would be getting this error? I have also attempted to directly add the library containing TrustManager to the taac-web project, and still get the same Exception. Any ideas? ERROR[com.wuntee.taac.business.TaacWorkshop][main] - couldnt create rsa dao: com.rsa.common.SystemException: Command target (CommandAPIConnection) initialization failure java.lang.NoClassDefFoundError: weblogic/security/SSL/TrustManager at com.rsa.command.ConnectionFactory.getSpringBeanTarget(ConnectionFactory.java:212) at com.rsa.command.ConnectionFactory.getTarget(ConnectionFactory.java:170) at com.rsa.command.ConnectionFactory.getConnection(ConnectionFactory.java:246) at com.wuntee.rsaAuthenticationManager.RsaAuthenticationManagerDao.init(RsaAuthenticationManagerDao.java:60) at com.wuntee.taac.business.TaacWorkshop.<init>(TaacWorkshop.java:68) at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39) at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27) at java.lang.reflect.Constructor.newInstance(Constructor.java:501) at org.springframework.beans.BeanUtils.instantiateClass(BeanUtils.java:126) at org.springframework.beans.factory.support.SimpleInstantiationStrategy.instantiate(SimpleInstantiationStrategy.java:72) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.instantiateBean(AbstractAutowireCapableBeanFactory.java:939) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBeanInstance(AbstractAutowireCapableBeanFactory.java:892) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:479) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:450) at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:290) at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222) at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:287) at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:189) at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:562) at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:871) at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:423) at org.springframework.web.context.ContextLoader.createWebApplicationContext(ContextLoader.java:272) at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:196) at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:47) at org.apache.catalina.core.StandardContext.listenerStart(StandardContext.java:3972) at org.apache.catalina.core.StandardContext.start(StandardContext.java:4467) at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1045) at org.apache.catalina.core.StandardHost.start(StandardHost.java:722) at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1045) at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443) at org.apache.catalina.core.StandardService.start(StandardService.java:516) at org.apache.catalina.core.StandardServer.start(StandardServer.java:710) at org.apache.catalina.startup.Catalina.start(Catalina.java:593) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:592) at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:289) at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:414) Caused by: com.rsa.ims.components.NoSuchComponentException: Unable to locate bean CommandAPIConnection at com.rsa.ims.components.spring.SpringComponentManagerImpl.getBean(SpringComponentManagerImpl.java:71) at com.rsa.command.ConnectionFactory.getSpringBeanTarget(ConnectionFactory.java:209) ... 39 more Caused by: org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'CacheableCommandTargetBasicAuth': FactoryBean threw exception on object creation; nested exception is java.lang.reflect.InvocationTargetException at org.springframework.beans.factory.support.FactoryBeanRegistrySupport.doGetObjectFromFactoryBean(FactoryBeanRegistrySupport.java:150) at org.springframework.beans.factory.support.FactoryBeanRegistrySupport.getObjectFromFactoryBean(FactoryBeanRegistrySupport.java:102) at org.springframework.beans.factory.support.AbstractBeanFactory.getObjectForBeanInstance(AbstractBeanFactory.java:1387) at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:301) at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:189) at org.springframework.context.support.AbstractApplicationContext.getBean(AbstractApplicationContext.java:1044) at com.rsa.ims.components.spring.SpringComponentManagerImpl.getBean(SpringComponentManagerImpl.java:69) ... 40 more Caused by: java.lang.reflect.InvocationTargetException at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39) at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27) at java.lang.reflect.Constructor.newInstance(Constructor.java:501) at com.rsa.command.RemoteCommandTargetFactoryBean.getObject(RemoteCommandTargetFactoryBean.java:273) at org.springframework.beans.factory.support.FactoryBeanRegistrySupport.doGetObjectFromFactoryBean(FactoryBeanRegistrySupport.java:143) ... 46 more Caused by: java.lang.NoClassDefFoundError: weblogic/security/SSL/TrustManager at java.lang.Class.forName0(Native Method) at java.lang.Class.forName(Class.java:164) at com.rsa.command.InitialContextFactoryLocator.getInitialContextFactory(InitialContextFactoryLocator.java:72) at com.rsa.command.EJBRemoteTarget.<init>(EJBRemoteTarget.java:189) ... 52 more

Search Results

Search found 317 results on 13 pages for 'e 164'.

Page 10/13 | < Previous Page | 6 7 8 9 10 11 12 13 | Next Page >

- by Red Rover

- by damnsweet

- by borncamp

- by Jess Telford

- by M132

- by cj

- by Brenna Johnson-Oracle

- by Brian T. Jackett

- by deadlydog

- by Tom Burman

- by user10821858

- by Dev G

- by jamieb

- by YANewb

- by evolvd

- by Darxval

- by Globulorozzo

- by aguynamedloren

- by user1775376

- by SWEngineer

- by Yak

- by Steve

- by Yashwant Chavan

- by user557417

- by wuntee

< Previous Page | 6 7 8 9 10 11 12 13 | Next Page >