Search Results

Search found 25196 results on 1008 pages for 'hard drive cache'.

Page 10/1008 | < Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >

• External USB 3 drive not recognized

  - by ilan123

  Ubuntu 12.10 64 bit seems not to recognize my external hard disk. It is a Vantec NST-310S3 external disk enclosure with a WD 3TB drive. The disk has two NTFS partitions. My PC is a dual boot system. Under Windows 7 the hard disk works fine but I can't make it work with Ubuntu. When the drive is connected to the PC then the command sudo fdisk -l seems to hang forever. Below are the output of lsusb and cat /proc/partitions without the external drive and then with it connected. I added also the last lines of the dmesg command at the end. First without the drive: ilan@linux:~$ lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 13ba:0017 Unknown PS/2 Keyboard+Mouse Adapter Bus 001 Device 004: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver Bus 001 Device 005: ID 0ac8:3420 Z-Star Microelectronics Corp. Venus USB2.0 Camera ilan@linux:~$ cat /proc/partitions major minor #blocks name 8 0 1953514584 sda 8 1 102400 sda1 8 2 629043200 sda2 8 3 367001600 sda3 8 4 1 sda4 8 5 471859200 sda5 8 6 157286400 sda6 8 7 324115456 sda7 8 8 4101120 sda8 11 0 1048575 sr0 Second with the USB 3 drive: ilan@linux:~$ lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 004 Device 002: ID 174c:55aa ASMedia Technology Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 13ba:0017 Unknown PS/2 Keyboard+Mouse Adapter Bus 001 Device 004: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver Bus 001 Device 005: ID 0ac8:3420 Z-Star Microelectronics Corp. Venus USB2.0 Camera ilan@linux:~$ cat /proc/partitions major minor #blocks name 8 0 1953514584 sda 8 1 102400 sda1 8 2 629043200 sda2 8 3 367001600 sda3 8 4 1 sda4 8 5 471859200 sda5 8 6 157286400 sda6 8 7 324115456 sda7 8 8 4101120 sda8 11 0 1048575 sr0 8 16 2930266584 sdb ilan@linux:~$ lsusb -v -s 004:002 Bus 004 Device 002: ID 174c:55aa ASMedia Technology Inc. Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 9 idVendor 0x174c ASMedia Technology Inc. idProduct 0x55aa bcdDevice 1.00 iManufacturer 2 iProduct 3 iSerial 1 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 44 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk-Only iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 ilan@linux:~$ sudo fdisk -l [sudo] password for ilan: Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xf1b4f1ee Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 1258293247 629043200 7 HPFS/NTFS/exFAT /dev/sda3 1258293248 1992296447 367001600 7 HPFS/NTFS/exFAT /dev/sda4 1992298494 3907028991 957365249 f W95 Ext'd (LBA) /dev/sda5 1992298496 2936016895 471859200 7 HPFS/NTFS/exFAT /dev/sda6 2936018944 3250591743 157286400 7 HPFS/NTFS/exFAT /dev/sda7 3250593792 3898824703 324115456 83 Linux /dev/sda8 3898826752 3907028991 4101120 82 Linux swap / Solaris dmesg output after connecting the external drive: [ 23.740567] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 23.740786] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 49.144673] usb 4-1: >new SuperSpeed USB device number 2 using xhci_hcd [ 49.163039] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 49.166789] usb 4-1: >New USB device found, idVendor=174c, idProduct=55aa [ 49.166793] usb 4-1: >New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 49.166796] usb 4-1: >Product: AS2105 [ 49.166799] usb 4-1: >Manufacturer: ASMedia [ 49.166801] usb 4-1: >SerialNumber: 0123456789ABCDEF [ 49.206372] usbcore: registered new interface driver uas [ 49.228891] Initializing USB Mass Storage driver... [ 49.229042] scsi6 : usb-storage 4-1:1.0 [ 49.229115] usbcore: registered new interface driver usb-storage [ 49.229116] USB Mass Storage support registered. [ 64.045528] scsi 6:0:0:0: >Direct-Access WDC WD30 EZRX-00MMMB0 80.0 PQ: 0 ANSI: 0 [ 64.046224] sd 6:0:0:0: >Attached scsi generic sg2 type 0 [ 64.046881] sd 6:0:0:0: >[sdb] Very big device. Trying to use READ CAPACITY(16). [ 64.047610] sd 6:0:0:0: >[sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 64.048368] sd 6:0:0:0: >[sdb] Write Protect is off [ 64.048373] sd 6:0:0:0: >[sdb] Mode Sense: 23 00 00 00 [ 64.048984] sd 6:0:0:0: >[sdb] No Caching mode page present [ 64.048987] sd 6:0:0:0: >[sdb] Assuming drive cache: write through [ 64.049297] sd 6:0:0:0: >[sdb] Very big device. Trying to use READ CAPACITY(16). [ 64.050942] sd 6:0:0:0: >[sdb] No Caching mode page present [ 64.050944] sd 6:0:0:0: >[sdb] Assuming drive cache: write through [ 94.245006] usb 4-1: >reset SuperSpeed USB device number 2 using xhci_hcd [ 94.262553] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 94.263805] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c00 [ 94.263808] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c40 [ 125.262722] usb 4-1: >reset SuperSpeed USB device number 2 using xhci_hcd [ 125.280304] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 125.281511] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c00 [ 125.281516] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c40

  Read the article

• I cant see my windows drive in ubuntu

  - by Shardul Dhande

  I'm n00ber than any n00b you ever seen, so bear with me... I just downloaded wubi and installed ubuntu 12.10 along with Windows 7 on the same HDD. Linux works fine, but doesnt show files from drive C (on which it is installed). I really need C as it contains all my files. I did df -h in the terminal. It does show the drive. /dev/sda2 577G 220G 358G 38% /host Now I tried to mount the drive sudo mount /dev/sda2 and got the response mount: /dev/sda2 already mounted or /host busy mount: according to mtab, /dev/sda2 is already mounted on /host I dont know what that means. The drive doesnt show up in HOME FOLDER. What am i supposed to do now?

  Read the article

• Cannot read from 2nd SATA data drive connected via SATA docking station

  - by Robbo

  Installed 10.10 this week on dual boot system. Everything else works fine but cannot read from 2nd SATA drive with all my data. Same drive works normally when booted to Windows XP. Interesting part is that I can see the drive in Ubuntu Disk Manager, can read all its attributes, can test it, shows up in Disk Manager, Storage Device Manager and Mount Manager, and can mount it, even change attributes; it appears healthy but does not show up in "Computer" or anywhere else that it can be accessed. The drive is connected via an external e-SATA docking station which is connected to a SATA port on the motherboard.

  Read the article

• Pen drive is recognizing as a USB Internet Dongle which connects to the PC. How do the Pen drive configure well in Ubuntu 12.04?

  - by Eranga Fernando

  Every time I connect my Pen drive it recognizes as more like a Dongle. The reason that I'm telling that if I connect it to the PC when I'm on the INTERNET, it will automatically copy all the files which are in the Dongle. So, I can't recognize which one is the Pen drive when I want to safely remove the device. I'm not sure whether it is the Pen drive or the Dongle..? Can anyone give me a good advice how to solve this problem?

  Read the article

• Using a degrading corrupted hard disk with a brand new one. Is this ok?

  - by EApubs

  My old 500 GB hard drive started to give bad sectors. Its slowly going down. So, I bought a new 1TB Seagate drive. I first attached the 500GB drive as the first primary drive and installed Windows. I want Windows boot loader to be placed in the old drive so it won't conflict with the Linux system. But the actual Windows system (Including the C drive) is placed on my new hard drive. After this, I attached the new drive as the primary and installed Linux. Now if I want to re install windows, I can do it without any issues by simply setting the old drive as the primary. So the Linux system will be untouched. But is it a good idea to set things like this? Will the old degrading drive have an impact on the new one? The old drive is slower than the new one. Won't I be able to get the maximum speed out of the new drive even when its used to install everything (including the OS)? PS : When I ran the Windows Experience Index, I was using the old drive as the primary. Did it got the hard drive ratings from the old drive? What if I run it now with the new drive as the primary?

  Read the article

• Changing Flash player of Firefox cache

  - by Prasenjit Chatterjee

  I want to relocate the Flash player plugin of Firefox cache so that it saves my C: drive space when I watch youtube videos. I successfully changed the firefox cache by opening about:config and then created a new string key "browser.cache.disk.parent_directory" where I put the value of the new cache location. But it doesn't work with online streaming contents such as youtube videos. Please guide me where does it get stored and how to change its cache into another drive.

  Read the article

• Force a USB device to use a certain drive letter

  - by asksuperuser

  Wnen I connected a friend's USB to my computer, it took a letter that used to be for my USB device. Now my USB doesn't use the same letter as before, even after a reboot. Is it possible to force it to go back to the same letter as before?

  Read the article

• Looking for Hard Drive Health Monitoring software

  - by RandyMorris

  I am aware that the current standard method of drive redundancy and backups would be a better solution, but I would be interested if there was a software that could be installed on workstation computers that could monitor hard drive health and give a warning if the drive looks like a failure is imminent. I have tried hdd health but it does not give me very useful information. I am not interested in drive space, just want a heads up before a drive failure. Anyone know anything like this?

  Read the article

• How to invalidate cache when benchmarking?

  - by Michael Buen

  I have this code, that when swapping the order of UsingAs and UsingCast, their performance also swaps. using System; using System.Diagnostics; using System.Linq; using System.IO; class Test { const int Size = 30000000; static void Main() { object[] values = new MemoryStream[Size]; UsingAs(values); UsingCast(values); Console.ReadLine(); } static void UsingCast(object[] values) { Stopwatch sw = Stopwatch.StartNew(); int sum = 0; foreach (object o in values) { if (o is MemoryStream) { var m = (MemoryStream)o; sum += (int)m.Length; } } sw.Stop(); Console.WriteLine("Cast: {0} : {1}", sum, (long)sw.ElapsedMilliseconds); } static void UsingAs(object[] values) { Stopwatch sw = Stopwatch.StartNew(); int sum = 0; foreach (object o in values) { if (o is MemoryStream) { var m = o as MemoryStream; sum += (int)m.Length; } } sw.Stop(); Console.WriteLine("As: {0} : {1}", sum, (long)sw.ElapsedMilliseconds); } } Outputs: As: 0 : 322 Cast: 0 : 281 When doing this... UsingCast(values); UsingAs(values); ...Results to this: Cast: 0 : 322 As: 0 : 281 When doing just this... UsingAs(values); ...Results to this: As: 0 : 322 When doing just this: UsingCast(values); ...Results to this: Cast: 0 : 322 Aside from running them independently, how to invalidate the cache so the second code being benchmarked won't receive the cached memory of first code? Benchmarking aside, just loved the fact that modern processors do this caching magic :-)

  Read the article

• Is "Turn Off Windows write-cache buffer flushing" safe on a laptop?

  - by Earlz

  my laptop's internal harddrive is a bit slow. I looked at the drive properties and there are two options: [X] Enable write caching on the device [ ] Turn off windows write-cache buffer flushing on the device As you can see, the first option is checked already, but the second option isn't. I've heard the second option can really speed things up, but it also sounds very risky. Is it safe to do on a laptop that rarely is off of AC power? (but still has battery as well)

  Read the article

• usb ntfs pen drive and hard drive not working after connection to ubuntu

  - by lemon619

  as said in the title first of all i connected a usb key (ntfs formatted) with data in it, on ubuntu 12.04, after i disconnected it i was no more able to access the usb key neither from windows nor from ubuntu 12.04. The system asks me to format my usb key Just now i connected a hard drive ntfs formatted with data in it to ubuntu 12.04. I ejected correctly the hard drive and connected it to windows, and the system asks me to format my hard drive? same as the usb key Can someone help me please ? Would really appreciate!

  Read the article

• Hard Drive benchmark values show write very very slow

  - by John

  I recently started to have issues with my laptop being very slow. I ran a hard drive benchmarking tool (by ATTO) that showed that the write speed was very very slow on my boot drive. I ran the same benchmark on my usb drive and it was 650 times faster than my boot drive when it came to writing. Reading is very fast/normal on both. I swapped out an identical drive and ran the same benchmark. This time the drive showed proper write speed. Thinking that I had a hard drive going bad I cloned the old one onto the new one. I managed to clone the problem too. Anyone have any ideas on what in WinXP SP3 might be causing the write issues? I am on a corporate network and we have commercial anti-virus software installed. (AVG I think) I regularly run defraggler and have about 40 gig free on a 100 gig drive. The machine has 4 gigs of memory. Any ideas? TIA J

  Read the article

• Seagate 3TB ST3000DM001 hard drive not recognized by Linux, causes fdisk to hang

  - by MountainX

  I'm running Kubuntu 12.04. I have a brand new, never used Seagate 3TB ST3000DM001 hard drive. It's an internal drive. I installed it in a USB enclosure. When I connect it to my PC, nothing happens automatically. When I run sudo fdisk -l, fdisk hangs (without reporting this drive) until I disconnect this drive from the USB port. blkid won't report it either. I tried connecting it to both USB 2.0 and USB 3.0 ports on my PC. I got the same result either way. I tried two different USB enclosures with the same result. If I take the same drive, same enclosure and connect it to a Windows 7 laptop, it is recognized automatically as a USB mass storage device. I want to format the drive (probably ext4) and copy files to it. I have another drive, also in a USB enclosure, that is connected via USB 3.0 to this PC and it works fine. It's a 2.0 TB Samsung HDD. I plan to copy files from the 2TB to the 3TB drive, once I get this issue resolved. My motherboard is an Asus Asus P8B WS LGA1155/ Intel C206/ Quad CrossFireX/ SATA3&USB3.0/ A&2GbE/ ATX. What is the resolution?

  Read the article

• ownership of hard drive recoveery of files Windows 7

  - by Jeff

  Here is the issue. I have an old laptop that died that was running xp. I now have a win 7 laptop. I need to get the files off the old drive. Win 7 will not let me take ownership of the drive. I can runn the comand prompt in regular mode and do a dir on the drive that shows up as Q: drive in regular mode. I gives me the volume as c and the serial number. I can not take ownership in regular mode with the comand prompt or other means. Microsoft site says use safe mode with networking. So I go to safe mode the drive shows up as G: in safe mode. I use the comand prompt Takeown /f G: and get the device is not ready error. I am at a loss. All I want is to retrieve my files from this drive. Any ideas or sugestions. I don't see how you can dir and get some info in one mode and not acces it in another. I have to get ownership and permissions fixed to get in the drive to get my files. Thanks in advance. I might add that I am using a usb3.0 to ide/sata cable adapter. Software came with the device but I can't make heads or tails out of the manual to know if any of the software can help me. The soft ware is PCClone Ex lite, and Clone Drive Soft ware

  Read the article

• Hard drive causing BSOD

  - by JoshIrving

  I've come across a problem after building my new PC and installing a clean Windows 7. I originally planed on a RAID 1 or 0 but after further research I decided against it. So I was left with two 1TB Western Digital Black SATA 6Gb/s hard drives. My plan now was to use my second hard drive as a backup (using Windows Backup or 3rd party software). I set both hard drives to AHCI in the BIOS and installed Windows 7. I went through the lengthy process of downloading and installing each driver manually (latest versions), using the motherboard disk for a list of what I need. After a few restarts and before installing any software, I took an image backup onto DVD and the second hard drive. First witnessed the problem during the first scheduled Windows backup. The progress bar froze at about 70% (doc backup done, image backup in progress). It stayed still for 2 hours until it blue screened. Next time the backup froze, I tried shutting down. It logged me out and got stuck at the last step ("Shutting down" and blue spinner) for an hour, until I hard shutdown. I later realised this hasn't got anything to do with the backup. I ended up blue screening on almost every shut down (same place). Turns out, it's because of the second hard drive spinning down or turning off. The computer will now shutdown properly, as long as I remember to read or write to the second drive before executing shutdown. I've now set "Turn off hard disk after: Never" - No problems, so far. Do I have dodgy hard drive(s) or should I investigate the POWER_STATE_DRIVER_FAILURE BSOD - can it be a driver issue? AHCI?

  Read the article

• Hard drive causing BSOD

  - by JoshIrving

  I've come across a problem after building my new PC and installing a clean Windows 7. I originally planed on a RAID 1 or 0 but after further research I decided against it. So I was left with two 1TB Western Digital Black SATA 6Gb/s hard drives. My plan now was to use my second hard drive as a backup (using Windows Backup or 3rd party software). I set both hard drives to AHCI in the BIOS and installed Windows 7. I went through the lengthy process of downloading and installing each driver manually (latest versions), using the motherboard disk for a list of what I need. After a few restarts and before installing any software, I took an image backup onto DVD and the second hard drive. First witnessed the problem during the first scheduled Windows backup. The progress bar froze at about 70% (doc backup done, image backup in progress). It stayed still for 2 hours until it blue screened. Next time the backup froze, I tried shutting down. It logged me out and got stuck at the last step ("Shutting down" and blue spinner) for an hour, until I hard shutdown. I later realised this hasn't got anything to do with the backup. I ended up blue screening on almost every shut down (same place). Turns out, it's because of the second hard drive spinning down or turning off. The computer will now shutdown properly, as long as I remember to read or write to the second drive before executing shutdown. I've now set "Turn off hard disk after: Never" - No problems, so far. Do I have dodgy hard drive(s) or should I investigate the POWER_STATE_DRIVER_FAILURE BSOD - can it be a driver issue? AHCI?

  Read the article

• My Hard Drive isn't Working

  - by MeCB

  I never use Safely Remove Hardware with Windows XP. It has been working for me for years with my SD card, mouse, hard drive and memory stick. My hard drive has a USB cable and power cord so I can hook it up to any desktop hard drive. Now my hard drives don't like this and I did not know this till now. I am always careful and to wait till it is all finish accessing the USB before I unplug it. Now three of my hard drives can't be seen by Windows, though the others still work. when I hook it up to another computer it works fine. I use the same USB cable to hook up all of my hard drives one at a time. So my USB cable is good. I think that when I unplugged the hard drive this one time, it had a file it still wanted to see and now only this drive does not work only this computer. Then the same thing happens to my other two hard drive after I used it for a week with the same cables. How can I fix this?

  Read the article

• Moving an external hard drive while running

  - by user1108939

  I mean physically moving the drive around. I've never dealt with external hard drives before. Just plugged this wd mypassport to test the transfer rate. At one point I 'safely ejected' the drive. A minute later I decide to check the underside of the drive, not realizing the disk is still spinning. I lift the drive, rotating my writs about 70 degrees to the left... I hear a sequence of three high pitched sounds. I couldn't determine whether that was an indication beep by an internal security feature or the head scratching the plate (oh god...). Drive stops and usb power is disconnected. I reconnect it - it shows up fine - reads/writes. The drive was not reading/writing when i moved it. Did I damage my drive? Are these things that fragile? I thought them to be at least as durable as a standard 2.5" internal drive. Am I mistaken?

  Read the article

• Throttling Cache Events

  - by dxfelcey

  The real-time eventing feature in Coherence is great for relaying state changes to other systems or to users. However, sometimes not all changes need to or can be sent to consumers. For instance; If rapid changes cannot be consumed or interpreted as fast as they are being sent. A user looking at changing Stock prices may only be able to interpret and react to 1 change per second. A client may be using low bandwidth connection, so rapidly sending events will only result in them being queued and delayed A large number of clients may need to be notified of state changes and sending 100 events p/s to 1000 clients cannot be supported with the available hardware, but 10 events p/s to 1000 clients can. Note this example assumes that many of the state changes are to the same value. One simple approach to throttling Coherence cache events is to use a cache store to capture changes to one cache (data cache) and insert those changes periodically in another cache (events cache). Consumers interested in state changes to entires in the first cache register an interest (event listener) against the second event cache. By using the cache store write-behind feature rapid updates to the same cache entry are coalesced so that updates are merged and written at the interval configured to the event cache. The time interval at which changes are written to the events cache can easily be configured using the write-behind delay time in the cache configuration, as shown below.   <caching-schemes>     <distributed-scheme>       <scheme-name>CustomDistributedCacheScheme</scheme-name>       <service-name>CustomDistributedCacheService</service-name>       <thread-count>1</thread-count>       <backing-map-scheme>         <read-write-backing-map-scheme>           <scheme-name>CustomRWBackingMapScheme</scheme-name>           <internal-cache-scheme>             <local-scheme />           </internal-cache-scheme>           <cachestore-scheme>             <class-scheme>               <scheme-name>CustomCacheStoreScheme</scheme-name>               <class-name>com.oracle.coherence.test.CustomCacheStore</class-name>               <init-params>                 <init-param>                   <param-type>java.lang.String</param-type>                   <param-value>{cache-name}</param-value>                 </init-param>                 <init-param>                   <param-type>java.lang.String</param-type>                   <!-- The name of the cache to write events to -->                   <param-value>cqc-test</param-value>                 </init-param>               </init-params>             </class-scheme>           </cachestore-scheme>           <write-delay>1s</write-delay>           <write-batch-factor>0</write-batch-factor>         </read-write-backing-map-scheme>       </backing-map-scheme>       <autostart>true</autostart>     </distributed-scheme>   </caching-schemes> The cache store implementation to perform this throttling is trivial and only involves overriding the basic cache store functions. public class CustomCacheStore implements CacheStore { private String publishingCacheName; private String sourceCacheName; public CustomCacheStore(String sourceCacheStore, String publishingCacheName) { this.publishingCacheName = publishingCacheName; this.sourceCacheName = sourceCacheName; } @Override public Object load(Object key) { return null; } @Override public Map loadAll(Collection keyCollection) { return null; } @Override public void erase(Object key) { if (sourceCacheName != publishingCacheName) { CacheFactory.getCache(publishingCacheName).remove(key); CacheFactory.log("Erasing entry: " + key, CacheFactory.LOG_DEBUG); } } @Override public void eraseAll(Collection keyCollection) { if (sourceCacheName != publishingCacheName) { for (Object key : keyCollection) { CacheFactory.getCache(publishingCacheName).remove(key); CacheFactory.log("Erasing collection entry: " + key, CacheFactory.LOG_DEBUG); } } } @Override public void store(Object key, Object value) { if (sourceCacheName != publishingCacheName) { CacheFactory.getCache(publishingCacheName).put(key, value); CacheFactory.log("Storing entry (key=value): " + key + "=" + value, CacheFactory.LOG_DEBUG); } } @Override public void storeAll(Map entryMap) { if (sourceCacheName != publishingCacheName) { CacheFactory.getCache(publishingCacheName).putAll(entryMap); CacheFactory.log("Storing entries: " + entryMap, CacheFactory.LOG_DEBUG); } } }  As you can see each cache store operation on the data cache results in a similar operation on event cache. This is a very simple pattern which has a lot of additional possibilities, but it also has a few drawbacks you should be aware of: This event throttling implementation will use additional memory as a duplicate copy of entries held in the data cache need to be held in the events cache too - 2 if the event cache has backups A data cache may already use a cache store, so a "multiplexing cache store pattern" must also be used to send changes to the existing and throttling cache store.  If you would like to try out this throttling example you can download it here. I hope its useful and let me know if you spot any further optimizations.

  Read the article

• HP DL380 G5 Predictive Drive Failure on a new drive

  - by CharlieJ

  Consolidated Error Report: Controller: Smart Array P400 in slot 3 Device: Physical Drive 1I:1:1 Message: Predictive failure. We have an HP DL380 G5 server with two 72GB 15k SAS drives configured in RAID1. A couple weeks ago, the server reported a drive failure on Drive 1. We replaced the drive with a brand new HDD -- same spares number. A few days ago, the server started reporting a predictive drive failure on the new drive, in the same bay. Is it likely the new drive is bad... or more likely we have a bay failure problem? This is a production server, so any advice would be appreciated. I have another spare drive, so I can hot swap it if this is a fluke and new drive is just bad. THANKS! CharlieJ

  Read the article

• How can I get data off of a damaged thumb drive?

  - by Lord Torgamus

  A guy I work with just came by to ask me about a damaged thumb drive/USB flash drive. Apparently his son dropped it on a hard surface and it won't power up anymore. They've tried plugging it into multiple machines without success, even though each port they tried was able to power other USB devices. He knows it's not a lost cause because a local tech store is offering to recover the data for $500, but he says they're not worth that much. I figured someone on SU would have an idea about this; he doesn't care about using the drive in the future, just wants to salvage a few files that would be a pain to recreate. Is this possible without advanced equipment, and if so, how? He said he already tried the advice on the Internet about typing in different drive letters and such, but that failed because there was no power going to the drive. He also said that he opened the case up at one point, but I'm not sure what, if anything, he did inside.

  Read the article

• How do I handle 3rd party search result data (via cache)

  - by reikyoushin

  I have a search function on my site and it is taking data from 6 different 3rd party resources. The problem is, it takes too long requesting the data over and over again on the results page. I've read for questions like this on SO about session not being a good choice but for me 'memcache' is not an option, because the server doesn't have memcached installed and I have no way to install it now. Is there any other approach to do this? Storing in the database seem inappropriate because the data depends on the search terms requested. What I've been thinking is writing a file on the server that would act as a cache for this file but I don't know how I would know when to delete it after.

  Read the article

• add packages to squid-deb-proxy cache

  - by zpletan

  To save bandwidth and data on my Internet plan, I have installed squid-deb-proxy on a desktop, and the client on it and a few other machines I've got. However, based on the post that put me onto this , it sounds like if I take my laptop to a different network and update it there, the downloaded updates will NOT be automatically copied back to the squid-deb-proxy server when I get back on my network. Assuming that this is correct (I will be testing later), is there a way I can stick these packages into the cache so I don't have to download them one more time for other machines in the network?

  Read the article

• joomla sometimes messes up urls, probably cache involved

  - by Bakaburg

  Is a bit i'm having this problem and i really cannot get the hang of it... Every once in while my joomla site messes up links url and for example from something like this: http://www.sism.org/index.php?option=com_comprofiler&task=userslist&listid=4&Itemid=123 it becomes like this: http://www.sism.org/index.php/component/k2/administrator/components/com_dump/assets/css/images/stories/inrilievo/sism/htm/index.php?option=com_comprofiler&task=userslist&listid=4&Itemid=123 the new page has the right content but there are no css and other linked resources. Usually i solve the problem by deleting all the cache and turning it off and on again. Of course this is pretty annoying especially for my association. Does any one have any clue on this? Watching the URLs the components involved seems to be K2 and Jdump. Thanks

  Read the article

• Tell the kernel to strongly cache a particular directory

  - by silviot

  This question is a rephrasing of Optimizing EXT4 performance. I have a directory that contains build files, most very small, but totaling 5.6G. I usually access the same subset of files (some thousands, for some tens of megabytes) over and over again. The subset changes daily (different projects, different versions of libraries). What takes longer when I use it seem to be disk seeks. For example if I do a du twice the second time it takes as much time as the first, and disk activity is similar. Ideally I'd like to tell the kernel to allocate X Mb to the metadata and Y to data in the folder, like the options for nfs cache. Is it possible in some way, other than mounting nfs from localhost and caching it to a ramdisk?

  Read the article

< Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >