Search Results

Search found 1777 results on 72 pages for 'magic'.

Page 10/72 | < Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >

  • Ubunti 12.10 wake on lan not working with Realtek 8139

    - by f.cipriani
    My pc doesn't wake up when receiving a magic packet from a pc connected to the same router. ethtool: fcipriani@ubuntu:~$ sudo ethtool eth0 Settings for eth0: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Link partner advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Link partner advertised pause frame use: No Link partner advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: MII PHYAD: 32 Transceiver: internal Auto-negotiation: on Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000007 (7) drv probe link Link detected: yes I have enabled all the wake up features in my bios, and I have verified the magic packet gets to the pc. I suspect the main problem is that the NIC light is completely turned off after the shutdown, but even after spending a lot of time researching I can't understand if this is a limit of my network card, my mobo, or something in the OS which needs to be configured correctly in order to leave the NIC in stand by mode with the light flashing. the NIC is Realtek 8139, the motherboard Asus P5L13L-X

    Read the article

  • Can't mount windows partition?

    - by C.J.
    When I try to open the Windows Partition from Ubuntu I receive the error: Unable to mount 55 GB Filesystem Error mounting: mount exited without exit code 13: ntfs_mst_post_read_fixup_warn: magic: 0x04010400 size: 1024 usa_ofs: 1026 usa_count: 1026: Invalid argument Record 6 has no FILE magic (0x4010400) Failed to open inode FILE_Bitmap: Input/output error Failed to mount '/dev/sda2': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more detail. Additionally, I can't open the Windows Partition. I've tried updating it many times but it won't show up on GRUB. Does anybody know what all this means? And how I might fix it? I thank you for any help in advance

    Read the article

  • How To Get a Better Wireless Signal and Reduce Wireless Network Interference

    - by Chris Hoffman
    Like all sufficiently advanced technologies, Wi-Fi can feel like magic. But Wi-Fi isn’t magic – it’s radio waves. A variety of things can interfere with these radio waves, making your wireless connection weaker and more unreliable. The main keys to improving your wireless network’s signal are positioning your router properly — taking obstructions into account — and reducing interference from other wireless networks and household appliances. Image Credit: John Taylor on Flickr How To Get a Better Wireless Signal and Reduce Wireless Network Interference How To Troubleshoot Internet Connection Problems 7 Ways To Free Up Hard Disk Space On Windows

    Read the article

  • Why does Facebook convert PHP code to C++?

    - by user72245
    I read that Facebook started out in PHP, and then to gain speed, they now compile PHP as C++ code. If that's the case why don't they: Just program in c++? Surely there must be SOME errors/bugs when hitting a magic compiler button that ports PHP to c++ code , right? If this impressive converter works so nicely, why stick to PHP at all? Why not use something like Ruby or Python? Note -- I picked these two at random, but mostly because nearly everyone says coding in those languages is a "joy". So why not develop in a super great language and then hit the magic c++ compile button?

    Read the article

  • Livre Blanc : Intégration SAP R/3 et Salesforce.com, comment optimiser les deux solutions et l'efficacité organisationelle ?

    Livre Blanc : Intégration SAP R/3 et Salesforce.com Comment exploiter pleinement les deux solutions et optimiser l'efficacité organisationelle Magic Software porpose un livre blanc sur l'intégration entre SAP R/3 et Salesforce.com. Magic Software a fait le constat que de nombreuses sociétés avaient fait le choix de l'ERP de SAP et du CRM en mode Cloud le plus connu mais que très peu d'entre elles avaient véritablement mis en place une intégration efficace des deux outils. « On constate que, dans la plupart des entreprises, ces solutions sont déployées indépendamment l'une de l'autre, [?] Pourtant, relier SAP R/3 et salesforce.com est indispensable », expliqu...

    Read the article

  • Apache Won't Restart After Compiling PHP with Postgres

    - by gonzofish
    I've compiled PHP (v5.3.1) with Postgres using the following configure: ./configure \ --build=x86_64-redhat-linux-gnu \ --host=x86_64-redhat-linux-gnu \ --target=x86_64-redhat-linux-gnu \ --program-prefix= \ --prefix=/usr/ \ --exec-prefix=/usr/ \ --bindir=/usr/bin/ \ --sbindir=/usr/sbin/ \ --sysconfdir=/etc \ --datadir=/usr/share \ --includedir=/usr/include/ \ --libdir=/usr/lib64 \ --libexecdir=/usr/libexec \ --localstatedir=/var \ --sharedstatedir=/usr/com \ --mandir=/usr/share/man \ --infodir=/usr/share/info \ --cache-file=../config.cache \ --with-libdir=lib64 \ --with-config-file-path=/etc \ --with-config-file-scan-dir=/etc/php.d \ --with-pic \ --disable-rpath \ --with-pear \ --with-pic \ --with-bz2 \ --with-exec-dir=/usr/bin \ --with-freetype-dir=/usr \ --with-png-dir=/usr \ --with-xpm-dir=/usr \ --enable-gd-native-ttf \ --with-t1lib=/usr \ --without-gdbm \ --with-gettext \ --without-gmp \ --with-iconv \ --with-jpeg-dir=/usr \ --with-openssl \ --with-zlib \ --with-layout=GNU \ --enable-exif \ --enable-ftp \ --enable-magic-quotes \ --enable-sockets \ --enable-sysvsem \ --enable-sysvshm \ --enable-sysvmsg \ --with-kerberos \ --enable-ucd-snmp-hack \ --enable-shmop \ --enable-calendar \ --with-libxml-dir=/usr \ --enable-xml \ --with-system-tzdata \ --with-mime-magic=/usr/share/file/magic \ --with-apxs2=/usr/sbin/apxs \ --with-mysql=/usr/include/mysql \ --without-gd \ --with-dom=/usr/include/libxml2/libxml \ --disable-dba \ --without-unixODBC \ --disable-pdo \ --enable-xmlreader \ --enable-xmlwriter \ --without-sqlite \ --without-sqlite3 \ --disable-phar \ --enable-fileinfo \ --enable-json \ --without-pspell \ --disable-wddx \ --with-curl=/usr/include/curl \ --enable-posix \ --with-mcrypt \ --enable-mbstring \ --with-pgsql=/mnt/mv/pgsql I'm using Postgres 8.4.0 and Apache 2.2.8; I have the following line in my Apache conf file: LoadModule php5_module /usr/lib64/httpd/modules/libphp5.so And when I attempt to restart Apache, I get the following error message: Starting httpd: httpd: Syntax error on line 205 of /etc/httpd/conf/httpd.conf: Cannot load /usr/lib64/httpd/modules/libphp5.so into server: /usr/lib64/httpd/modules/libphp5.so: undefined symbol: lo_import_with_oid Now, I know that this is a problem with Postgres with PHP because lo_import_with_oid is a function in the Postgres source which allows the importing of large objects; also, if I remove the --with-pgsql option, PHP and Apache get along great. I've scoured the Internet looking for answers all day, but to no avail. Does anyone have ANY insight into what is causing my problems.

    Read the article

  • I cannot format my PC

    - by Jesus Buelna
    I have a Toshiba Satellite(1) l505 6gb RAM, 6.00GB hard disk.Initially I have problem with another satellite(2) I had (mother board problem). I took my Laptop to a technician and cost a lot of money (almost as much as buying new one). So, since I have HDD problems with the first one(1) I decided to use the hard disk of the other one(2). I formatted the HDD and erased the partitions it had into 1 partition (or no partition). The problem is that when I try to format with the SO CD, in the screen, where I have to decide in which partition I want to install the SO, the only one option I have says "unallocated partition and I receive this message "Windows cannot install the SO in this partition, run files do not existed or maybe corrupted" When I erased the disk with Parted Magic, Did I erased any files needed for running the installing disk? I don't know. Is it possible to fixed or reinstate the disk to install the OS? By the way, I checked the disk physical health with Parted Magic, and it is OK. One more thing when I erased the disc to 0, I used the safety option offered by the Parted Magic.Need help please.

    Read the article

  • How to strip out a -D for just one file in a gnu makefile?

    - by WilliamKF
    I have '-Wredundant-decls' in my CXXFLAGS but for one file, I want it removed. In my GNU makefile, how can I structure a rule to remove just that part of the CXXFLAGS. I know how to add only for that file, I would do something like this: $O/just_one_file.o: CXXFLAGS += -Wredundant-decls So, ideally I'd do something like this (which doesn't work) to remove it: $O/just_one_file.o: CXXFLAGS -= -Wredundant-decls However, maybe with some $ magic, I can construct some kind of sed or perl script to strip out the -Wredundant-decls and set CXXFLAGS to the stripped value: $O/just_one_file.o: CXXFLAGS = $(shell strip magic here for $CXXFLAGS)

    Read the article

  • C# searching for new Tool for the tool box, how to template this code

    - by Nix
    All i have something i have been trying to do for a while and have yet to find a good strategy to do it, i am not sure C# can even support what i am trying to do. Example imagine a template like this, repeated in manager code overarching cocept function Returns a result consisting of a success flag and error list. public Result<Boolean> RemoveLocation(LocationKey key) { List<Error> errorList = new List<Error>(); Boolean result = null; try{ result = locationDAO.RemoveLocation(key); }catch(UpdateException ue){ //Error happened less pass this back to the user! errorList = ue.ErrorList; } return new Result<Boolean>(result, errorList); } Looking to turn it into a template like the below where Do Something is some call (preferably not static) that returns a Boolean. I know i could do this in a stack sense, but i am really looking for a way to do it via object reference. public Result<Boolean> RemoveLocation(LocationKey key) { var magic = locationDAO.RemoveLocation(key); return ProtectedDAOCall(magic); } public Result<Boolean> CreateLocation(LocationKey key) { var magic = locationDAO.CreateLocation(key); return ProtectedDAOCall(magic); } public Result<Boolean> ProtectedDAOCall(Func<..., bool> doSomething) { List<Error> errorList = new List<Error>(); Boolean result = null; try{ result = doSomething(); }catch(UpdateException ue){ //Error happened less pass this back to the user! errorList = ue.ErrorList; } return new Result<Boolean>(result, errorList); } If there is any more information you may need let me know. I am interested to see what someone else can come up with. Marc solution applied to the code above public Result<Boolean> CreateLocation(LocationKey key) { LocationDAO locationDAO = new LocationDAO(); return WrapMethod(() => locationDAO.CreateLocation(key)); } public Result<Boolean> RemoveLocation(LocationKey key) { LocationDAO locationDAO = new LocationDAO(); return WrapMethod(() => locationDAO.RemoveLocation(key)); } static Result<T> WrapMethod<T>(Func<Result<T>> func) { try { return func(); } catch (UpdateException ue) { return new Result<T>(default(T), ue.Errors); } }

    Read the article

  • Jquery and frames

    - by Shard
    I am currently working on a web application that has been created using a magnitude of frames that stretch down up to 5 times, The issue is that i need to preform some jquery magic throughout the website. What would be the best way to go about this (other than rewriting it which i have considered)? EDIT: The Frame Structure is something along the lines of this: Index.html menu.html banner.html list.html footer.html /lib/index.html header.html body.html footer.html The magic i am referencing is a few hot key shortcuts, find and replace that kind of stuff

    Read the article

  • Simplest way to match array of strings to search in perl?

    - by Ben Dauphinee
    What I want to do is check an array of strings against my search string and get the corresponding key so I can store it. Is there a magical way of doing this with Perl, or am I doomed to using a loop? If so, what is the most efficient way to do this? I'm relatively new to Perl (I've only written 2 other scripts), so I don't know a lot of the magic yet, just that Perl is magic =D Reference Array: (1 = 'Canon', 2 = 'HP', 3 = 'Sony') Search String: Sony's Cyber-shot DSC-S600 End Result: 3

    Read the article

  • Pros and cons of escaping strategies in symfony

    - by zergu
    I am still not sure in that matter. While turned on we're quite safe but some other problems appear (with passing template variables or counting characters). On the other hand we have magic turned off, everything is clear, but we have to manually escape every variable (that come from untrusted source) in templates. By the way, non-magic solution is used in Ruby-on-Rails. So the question is: when starting a new project in symfony do you disable escaping_strategy and why?

    Read the article

  • How to enable MALLOC_PROTECT_BEFORE in Xcode?

    - by Daniel S.
    After switching on some debug options in Xcode, it now tells me the following in the output: GuardMalloc[Roadcast-4010]: free: magic is 0x0000090b, not 0xdeadbeef. GuardMalloc[Roadcast-4010]: free: header magic value at 0x43f49bf0, for block 0x43f49c00-0x43f50000, has been trashed by a buffer underrun. GuardMalloc[Roadcast-4010]: Try running with MALLOC_PROTECT_BEFORE to catch this error immediately as it happens. How do I switch on MALLOC_PROTECT_BEFORE?

    Read the article

  • Can I reverse the order of a multicast delegate event?

    - by Neil Barnwell
    When you subscribe to an event in .NET, the subscription is added to a multicast delegate. When the event is fired, the delegates are called in the order they were subscribed. I'd like to override the subscription somehow, so that the subscriptions are actually fired in the reverse order. Can this be done, and how? I think something like this might be what I need?: public event MyReversedEvent { add { /* magic! */ } remove { /* magic! */ } }

    Read the article

  • Is the Google Annotations Gallery useful in production code?

    - by cafe
    I could actually see a use for the Google Annotations Gallery in real code: Stumble across code that somehow works beyond all reason? Life's short. Mark it with @Magic and move on: @Magic public static int negate(int n) { return new Byte((byte) 0xFF).hashCode() / (int) (short) '\uFFFF' * ~0 * Character.digit ('0', 0) * n * (Integer.MAX_VALUE * 2 + 1) / (Byte.MIN_VALUE >> 7) * (~1 | 1); } This is a serious question. Could this be used in an actual code review?

    Read the article

  • give preference to print array values in php

    - by Bharanikumar
    Hi , I have country table, i fetch all values and moved into array , these value i like to populate into combo/dropdown list , here i want to do some magic things, that is , for my site most of the users coming from uk,us,Australia,Romain and few, So i like to populate by my preference , is there any array will do this magic work, else is it possible mysql query , So final question is , Populate country name into combo based on my prefernce , Thanks

    Read the article

  • How to develop RPG Damage Formulas?

    - by user127817
    I'm developing a classical 2d RPG (in a similar vein to final fantasy) and I was wondering if anyone had some advice on how to do damage formulas/links to resources/examples? I'll explain my current setup. Hopefully I'm not overdoing it with this question, and I apologize if my questions is too large/broad My Characters stats are composed of the following: enum Stat { HP = 0, MP = 1, SP = 2, Strength = 3, Vitality = 4, Magic = 5, Spirit = 6, Skill = 7, Speed = 8, //Speed/Agility are the same thing Agility = 8, Evasion = 9, MgEvasion = 10, Accuracy = 11, Luck = 12, }; Vitality is basically defense to physical attacks and spirit is defense to magic attacks. All stats have fixed maximums (9999 for HP, 999 for MP/SP and 255 for the rest). With abilities, the maximums can be increased (99999 for HP, 9999 for HP/SP, 999 for the rest) with typical values (at level 100) before/after abilities+equipment+etc will be 8000/20,000 for HP, 800/2000 for SP/MP, 180/350 for other stats Late game Enemy HP will typically be in the lower millions (with a super boss having the maximum of ~12 million). I was wondering how do people actually develop proper damage formulas that scale correctly? For instance, based on this data, using the damage formulas for Final Fantasy X as a base looked very promising. A full reference here http://www.gamefaqs.com/ps2/197344-final-fantasy-x/faqs/31381 but as a quick example: Str = 127, 'Attack' command used, enemy Def = 34. 1. Physical Damage Calculation: Step 1 ------------------------------------- [{(Stat^3 ÷ 32) + 32} x DmCon ÷16] Step 2 ---------------------------------------- [{(127^3 ÷ 32) + 32} x 16 ÷ 16] Step 3 -------------------------------------- [{(2048383 ÷ 32) + 32} x 16 ÷ 16] Step 4 --------------------------------------------------- [{(64011) + 32} x 1] Step 5 -------------------------------------------------------- [{(64043 x 1)}] Step 6 ---------------------------------------------------- Base Damage = 64043 Step 7 ----------------------------------------- [{(Def - 280.4)^2} ÷ 110] + 16 Step 8 ------------------------------------------ [{(34 - 280.4)^2} ÷ 110] + 16 Step 9 ------------------------------------------------- [(-246)^2) ÷ 110] + 16 Step 10 ---------------------------------------------------- [60516 ÷ 110] + 16 Step 11 ------------------------------------------------------------ [550] + 16 Step 12 ---------------------------------------------------------- DefNum = 566 Step 13 ---------------------------------------------- [BaseDmg * DefNum ÷ 730] Step 14 --------------------------------------------------- [64043 * 566 ÷ 730] Step 15 ------------------------------------------------------ [36248338 ÷ 730] Step 16 ------------------------------------------------- Base Damage 2 = 49655 Step 17 ------------ Base Damage 2 * {730 - (Def * 51 - Def^2 ÷ 11) ÷ 10} ÷ 730 Step 18 ---------------------- 49655 * {730 - (34 * 51 - 34^2 ÷ 11) ÷ 10} ÷ 730 Step 19 ------------------------- 49655 * {730 - (1734 - 1156 ÷ 11) ÷ 10} ÷ 730 Step 20 ------------------------------- 49655 * {730 - (1734 - 105) ÷ 10} ÷ 730 Step 21 ------------------------------------- 49655 * {730 - (1629) ÷ 10} ÷ 730 Step 22 --------------------------------------------- 49655 * {730 - 162} ÷ 730 Step 23 ----------------------------------------------------- 49655 * 568 ÷ 730 Step 24 -------------------------------------------------- Final Damage = 38635 I simply modified the dividers to include the attack rating of weapons and the armor rating of armor. Magic Damage is calculated as follows: Mag = 255, Ultima is used, enemy MDef = 1 Step 1 ----------------------------------- [DmCon * ([Stat^2 ÷ 6] + DmCon) ÷ 4] Step 2 ------------------------------------------ [70 * ([255^2 ÷ 6] + 70) ÷ 4] Step 3 ------------------------------------------ [70 * ([65025 ÷ 6] + 70) ÷ 4] Step 4 ------------------------------------------------ [70 * (10837 + 70) ÷ 4] Step 5 ----------------------------------------------------- [70 * (10907) ÷ 4] Step 6 ------------------------------------ Base Damage = 190872 [cut to 99999] Step 7 ---------------------------------------- [{(MDef - 280.4)^2} ÷ 110] + 16 Step 8 ------------------------------------------- [{(1 - 280.4)^2} ÷ 110] + 16 Step 9 ---------------------------------------------- [{(-279.4)^2} ÷ 110] + 16 Step 10 -------------------------------------------------- [(78064) ÷ 110] + 16 Step 11 ------------------------------------------------------------ [709] + 16 Step 12 --------------------------------------------------------- MDefNum = 725 Step 13 --------------------------------------------- [BaseDmg * MDefNum ÷ 730] Step 14 --------------------------------------------------- [99999 * 725 ÷ 730] Step 15 ------------------------------------------------- Base Damage 2 = 99314 Step 16 ---------- Base Damage 2 * {730 - (MDef * 51 - MDef^2 ÷ 11) ÷ 10} ÷ 730 Step 17 ------------------------ 99314 * {730 - (1 * 51 - 1^2 ÷ 11) ÷ 10} ÷ 730 Step 18 ------------------------------ 99314 * {730 - (51 - 1 ÷ 11) ÷ 10} ÷ 730 Step 19 --------------------------------------- 99314 * {730 - (49) ÷ 10} ÷ 730 Step 20 ----------------------------------------------------- 99314 * 725 ÷ 730 Step 21 -------------------------------------------------- Final Damage = 98633 The problem is that the formulas completely fall apart once stats start going above 255. In particular Defense values over 300 or so start generating really strange behavior. High Strength + Defense stats lead to massive negative values for instance. While I might be able to modify the formulas to work correctly for my use case, it'd probably be easier just to use a completely new formula. How do people actually develop damage formulas? I was considering opening excel and trying to build the formula that way (mapping Attack Stats vs. Defense Stats for instance) but I was wondering if there's an easier way? While I can't convey the full game mechanics of my game here, might someone be able to suggest a good starting place for building a damage formula? Thanks

    Read the article

  • How to develop RPG Damage Formulas?

    - by user127817
    I'm developing a classical 2d RPG (in a similar vein to final fantasy) and I was wondering if anyone had some advice on how to do damage formulas/links to resources/examples? I'll explain my current setup. Hopefully I'm not overdoing it with this question, and I apologize if my questions is too large/broad My Characters stats are composed of the following: enum Stat { HP = 0, MP = 1, SP = 2, Strength = 3, Vitality = 4, Magic = 5, Spirit = 6, Skill = 7, Speed = 8, //Speed/Agility are the same thing Agility = 8, Evasion = 9, MgEvasion = 10, Accuracy = 11, Luck = 12, }; Vitality is basically defense to physical attacks and spirit is defense to magic attacks. All stats have fixed maximums (9999 for HP, 999 for MP/SP and 255 for the rest). With abilities, the maximums can be increased (99999 for HP, 9999 for HP/SP, 999 for the rest) with typical values (at level 100) before/after abilities+equipment+etc will be 8000/20,000 for HP, 800/2000 for SP/MP, 180/350 for other stats Late game Enemy HP will typically be in the lower millions (with a super boss having the maximum of ~12 million). I was wondering how do people actually develop proper damage formulas that scale correctly? For instance, based on this data, using the damage formulas for Final Fantasy X as a base looked very promising. A full reference here http://www.gamefaqs.com/ps2/197344-final-fantasy-x/faqs/31381 but as a quick example: Str = 127, 'Attack' command used, enemy Def = 34. 1. Physical Damage Calculation: Step 1 ------------------------------------- [{(Stat^3 ÷ 32) + 32} x DmCon ÷16] Step 2 ---------------------------------------- [{(127^3 ÷ 32) + 32} x 16 ÷ 16] Step 3 -------------------------------------- [{(2048383 ÷ 32) + 32} x 16 ÷ 16] Step 4 --------------------------------------------------- [{(64011) + 32} x 1] Step 5 -------------------------------------------------------- [{(64043 x 1)}] Step 6 ---------------------------------------------------- Base Damage = 64043 Step 7 ----------------------------------------- [{(Def - 280.4)^2} ÷ 110] + 16 Step 8 ------------------------------------------ [{(34 - 280.4)^2} ÷ 110] + 16 Step 9 ------------------------------------------------- [(-246)^2) ÷ 110] + 16 Step 10 ---------------------------------------------------- [60516 ÷ 110] + 16 Step 11 ------------------------------------------------------------ [550] + 16 Step 12 ---------------------------------------------------------- DefNum = 566 Step 13 ---------------------------------------------- [BaseDmg * DefNum ÷ 730] Step 14 --------------------------------------------------- [64043 * 566 ÷ 730] Step 15 ------------------------------------------------------ [36248338 ÷ 730] Step 16 ------------------------------------------------- Base Damage 2 = 49655 Step 17 ------------ Base Damage 2 * {730 - (Def * 51 - Def^2 ÷ 11) ÷ 10} ÷ 730 Step 18 ---------------------- 49655 * {730 - (34 * 51 - 34^2 ÷ 11) ÷ 10} ÷ 730 Step 19 ------------------------- 49655 * {730 - (1734 - 1156 ÷ 11) ÷ 10} ÷ 730 Step 20 ------------------------------- 49655 * {730 - (1734 - 105) ÷ 10} ÷ 730 Step 21 ------------------------------------- 49655 * {730 - (1629) ÷ 10} ÷ 730 Step 22 --------------------------------------------- 49655 * {730 - 162} ÷ 730 Step 23 ----------------------------------------------------- 49655 * 568 ÷ 730 Step 24 -------------------------------------------------- Final Damage = 38635 I simply modified the dividers to include the attack rating of weapons and the armor rating of armor. Magic Damage is calculated as follows: Mag = 255, Ultima is used, enemy MDef = 1 Step 1 ----------------------------------- [DmCon * ([Stat^2 ÷ 6] + DmCon) ÷ 4] Step 2 ------------------------------------------ [70 * ([255^2 ÷ 6] + 70) ÷ 4] Step 3 ------------------------------------------ [70 * ([65025 ÷ 6] + 70) ÷ 4] Step 4 ------------------------------------------------ [70 * (10837 + 70) ÷ 4] Step 5 ----------------------------------------------------- [70 * (10907) ÷ 4] Step 6 ------------------------------------ Base Damage = 190872 [cut to 99999] Step 7 ---------------------------------------- [{(MDef - 280.4)^2} ÷ 110] + 16 Step 8 ------------------------------------------- [{(1 - 280.4)^2} ÷ 110] + 16 Step 9 ---------------------------------------------- [{(-279.4)^2} ÷ 110] + 16 Step 10 -------------------------------------------------- [(78064) ÷ 110] + 16 Step 11 ------------------------------------------------------------ [709] + 16 Step 12 --------------------------------------------------------- MDefNum = 725 Step 13 --------------------------------------------- [BaseDmg * MDefNum ÷ 730] Step 14 --------------------------------------------------- [99999 * 725 ÷ 730] Step 15 ------------------------------------------------- Base Damage 2 = 99314 Step 16 ---------- Base Damage 2 * {730 - (MDef * 51 - MDef^2 ÷ 11) ÷ 10} ÷ 730 Step 17 ------------------------ 99314 * {730 - (1 * 51 - 1^2 ÷ 11) ÷ 10} ÷ 730 Step 18 ------------------------------ 99314 * {730 - (51 - 1 ÷ 11) ÷ 10} ÷ 730 Step 19 --------------------------------------- 99314 * {730 - (49) ÷ 10} ÷ 730 Step 20 ----------------------------------------------------- 99314 * 725 ÷ 730 Step 21 -------------------------------------------------- Final Damage = 98633 The problem is that the formulas completely fall apart once stats start going above 255. In particular Defense values over 300 or so start generating really strange behavior. High Strength + Defense stats lead to massive negative values for instance. While I might be able to modify the formulas to work correctly for my use case, it'd probably be easier just to use a completely new formula. How do people actually develop damage formulas? I was considering opening excel and trying to build the formula that way (mapping Attack Stats vs. Defense Stats for instance) but I was wondering if there's an easier way? While I can't convey the full game mechanics of my game here, might someone be able to suggest a good starting place for building a damage formula? Thanks

    Read the article

  • Dark Sun Dispatch 001

    - by Chris Williams
    If you aren't into tabletop (aka pen & paper) RPGs, you might as well click to the next post now... Still here? Awesome. I've recently started running a new D&D 4.0 Dark Sun campaign. If you don't know anything about Dark Sun, here's a quick intro: The campaign take place on the world of Athas, formerly a lush green world that is now a desert wasteland. Forests are rare in the extreme, as is water and metal. Coins are made of ceramic and weapons are often made of hardened wood, bone or obsidian. The green age of Athas was centuries ago and the current state was brought about through the reckless use of sorcerous magic. (In this world, you can augment spells by drawing on the life force of the world & people around you. This is called defiling. Preserving magic draws upon the casters life force and does not damage the surrounding world, but it isn't as powerful.) Humans are pretty much unchanged, but the traditional fantasy races have changed quite a bit. Elves don't live in the forest, they are shifty and untrustworthy desert traders known for their ability to run long distances through the wastes. Halflings are not short, fat, pleasant little riverside people. Instead they are bloodthirsty feral cannibals that roam the few remaining forests and ride reptilians beasts akin to raptors. Gnomes are extinct, as are orcs. Dwarves are mostly farmers and gladiators, and live out in the sun instead of staying under the mountains. Goliaths are half-giants, not known for their intellect. Muls are a Dwarf & Human crossbreed that displays the best traits of both races (human height and dwarven stoutness.) Thri-Kreen are sentient mantis people that are extremely fast. Most of the same character classes are available, with a few new twists. There are no divine characters (such as Priests, Paladins, etc) because the gods are gone. Nobody alive today can remember a time when they were still around. Instead, some folks worship the elemental forces (although they don't give out spells.) The cities are all ruled by Sorcerer King tyrants (except one city: Tyr) who are hundreds of years old and still practice defiling magic whenever they please. Serving the Sorcerer Kings are the Templars, who are also defilers and psionicists. Crossing them is as bad, in many cases, as crossing the Kings themselves. Between the cities you have small towns and trading outposts, and mostly barren desert with sometimes 4-5 days on foot between towns and the nearest oasis. Being caught out in the desert without adequate supplies and protection from the elements is pretty much a death sentence for even the toughest heroes. When you add in the natural (and unnatural) predators that roam the wastes, often in packs, most people don't last long alone. In this campaign, the adventure begins in the (small) trading fortress of Altaruk, a couple weeks walking distance from the newly freed city of Tyr. A caravan carrying trade goods from Altaruk has not made it to Tyr and the local merchant house has dispatched the heroes to find out what happened and to retrieve the goods (and drivers) if possible. The unlikely heroes consist of a human shaman, a thri-kreen monk, a human wizard, a kenku assassin and a (void aspect) genasi swordmage. Gathering up supplies and a little liquid courage, they set out into the desert and manage to find the northbound tracks of the wagon. Shortly after finding the tracks, they are ambushed by a pack of silt-runners (small lizard people with very large teeth and poisoned pointy spears.) The party makes short work of the creatures, taking a few minor wounds in the process. Proceeding onward without resting, they find the remains of the wagon and manage to sneak up on a pack of Kruthiks picking through the rubble and spilled goods. Unfortunately, they failed to take advantage of the opportunity and had a hard fight ahead of them. The party defeated the kruthiks, but took heavy damage (and almost lost a couple of their own) in the process. Once the kruthiks were dispatched, they followed a set of tracks further north to a ruined tower...

    Read the article

  • Converting .docx to pdf (or .doc to pdf, or .doc to odt, etc.) with libreoffice on a webserver on the fly using php

    - by robertphyatt
    Ok, so I needed to convert .docx files to .pdf files on the fly, but none of the free php libraries that were available let me do it on my server (a webservice was not good enough). Basically either I needed to pay for a library (and have it maybe suck) or just deal with the free ones that didn't convert the formatting well enough. Not good enough! I found that LibreOffice (OpenOffice's successor) allows command line conversion using the LibreOffice conversion engine (which DID preserve the formatting like I wanted and generally worked great). I loaded the latest version of Ubuntu (http://www.ubuntu.com/download/ubuntu/download) onto my Virtual Box (https://www.virtualbox.org/wiki/Downloads) on my computer and found that I was able to easily convert files using the commandline like this: libreoffice --headless -convert-to pdf fileToConvert.docx -outdir output/path/for/pdf I thought: sweet...but I don't have admin rights on my host's web server. I tried to use a "portable" version of LibreOffice that I obtained from http://portablelinuxapps.org/ but I was unable to get it to work on my host's webserver, because my host's webserver didn't have all the dependencies (Dependency Hell! http://en.wikipedia.org/wiki/Dependency_hell) I was at a loss of how to make it work, until I ran across a cool project made by a Ph.D. student (Philip J. Guo) at Stanford called CDE: http://www.stanford.edu/~pgbovine/cde.html I will let you look at his explanations of how it works (I followed what he did in http://www.youtube.com/watch?feature=player_embedded&v=6XdwHo1BWwY, starting at about 32:00 as well as the directions on his site), but in short, it allows one to avoid dependency hell by copying all the files used when you run certain commands, recreating the linux environment where the command worked. I was able to use this to run LibreOffice without having to resort to someone's portable version of it, and it worked just like it did when I did it on Ubuntu with the command above, with a tweak: I needed to run the wrapper of LibreOffice the CDE generated. So, below is my PHP code that calls it. In this code snippet, the filename to be copied is passed in as $_POST["filename"]. I copy the file to the same spot where I originally converted the file, convert it, copy it back and then delete all the files (so that it doesn't start growing exponentially). I did it this way because I wasn't able to make it work otherwise on the webserver. If there is a linux + webserver ninja out there that can figure out how to make it work without doing this, I would be interested to know what you did. Please post a comment or something if you did that. <?php //first copy the file to the magic place where we can convert it to a pdf on the fly copy($time.$_POST["filename"], "../LibreOffice/cde-package/cde-root/home/robert/Desktop/".$_POST["filename"]); //change to that directory chdir('../LibreOffice/cde-package/cde-root/home/robert'); //the magic command that does the conversion $myCommand = "./libreoffice.cde --headless -convert-to pdf Desktop/".$_POST["filename"]." -outdir Desktop/"; exec ($myCommand); //copy the file back copy("Desktop/".str_replace(".docx", ".pdf", $_POST["filename"]), "../../../../../documents/".str_replace(".docx", ".pdf", $_POST["filename"])); //delete all the files out of the magic place where we can convert it to a pdf on the fly $files1 = scandir('Desktop'); //my files that I generated all happened to start with a number. $pattern = '/^[0-9]/'; foreach ($files1 as $value) { preg_match($pattern, $value, $matches); if(count($matches) ?> 0) { unlink("Desktop/".$value); } } //changing the header to the location of the file makes it work well on androids header( 'Location: '.str_replace(".docx", ".pdf", $_POST["filename"]) ); ?> And here is the tar.gz file I generated I generated with CDE. To duplicate what I did exactly, put the tar.gz file in a folder somewhere. I will call that folder the "root". Make a new folder called "documents" in the "root" folder. Unpack the tar.gz and run the php script above from the "documents" folder. Success! I made a truly portable version of LibreOffice that can convert files on the fly on a webserver using 100% free, open source software!

    Read the article

  • Service php-fpm does not support chkconfig

    - by ychian
    Everything is working fine. Just that when i chkconfig –add php-fpm It throws me an error Service php-fpm does not support chkconfig php-5.2.13 php-5.2.13-fpm-0.5.13.diff.gz Below is the configuration i use ./configure --enable-fastcgi --enable-fpm --build=x86_64-redhat-linux-gnu --host=x86_64-redhat-linux-gnu --target=x86_64-redhat-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --cache-file=../config.cache --with-libdir=lib64 --with-config-file-path=/etc --with-config-file-scan-dir=/etc/php.d --disable-debug --with-pic --disable-rpath --with-pear --with-bz2 --with-curl --with-exec-dir=/usr/bin --with-freetype-dir=/usr --with-png-dir=/usr --enable-gd-native-ttf --without-gdbm --with-gettext --with-gmp --with-iconv --with-jpeg-dir=/usr --with-openssl --with-png --with-expat-dir=/usr --with-pcre-regex=/usr --with-zlib --with-layout=GNU --enable-exif --enable-ftp --enable-magic-quotes --enable-sockets --enable-sysvsem --enable-sysvshm --enable-sysvmsg --enable-track-vars --enable-trans-sid --enable-yp --enable-wddx --with-kerberos --enable-ucd-snmp-hack --with-unixODBC=shared,/usr --enable-memory-limit --enable-shmop --enable-calendar --enable-dbx --enable-dio --with-mime-magic=/usr/share/file/magic.mime --without-sqlite --with-libxml-dir=/usr --with-xml --with-system-tzdata --without-mysql --without-gd --without-odbc --disable-dom --disable-dba --without-unixODBC --disable-pdo --disable-xmlreader --disable-xmlwriter

    Read the article

  • Generic delegate instances

    - by Luc C
    I wonder if C# (or the underlying .NET framework) supports some kind of "generic delegate instances": that is a delegate instance that still has an unresolved type parameter, to be resolved at the time the delegate is invoked (not at the time the delegate is created). I suspect this isn't possible, but I'm asking it anyway... Here is an example of what I'd like to do, with some "???" inserted in places where the C# syntax seems to be unavailable for what I want. (Obviously this code doesn't compile) class Foo { public T Factory<T>(string name) { // implementation omitted } } class Test { public void TestMethod() { Foo foo = new Foo(); ??? magic = foo.Factory; // No type argument given here yet to Factory! // What would the '???' be here (other than 'var' :) )? string aString = magic<string>("name 1"); // type provided on call int anInt = magic<int>("name 2"); // another type provided on another call // Note the underlying calls work perfectly fine, these work, but i'd like to expose // the generic method as a delegate. string aString2 = foo.Factory<string>("name 1"); int anInt2 = foo.Factory<int>("name 2"); } } Is there a way to actually do something like this in C#? If not, is that a limitation in the language, or is it in the .NET framework?

    Read the article

< Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >