Search Results

Search found 366 results on 15 pages for 'solidq journal'.

Page 10/15 | < Previous Page | 6 7 8 9 10 11 12 13 14 15  | Next Page >

• How do you re-mount an ext3 fs readwrite after it gets mounted readonly from a disk error?

  - by cagenut

  Its a relatively common problem when something goes wrong in a SAN for ext3 to detect the disk write errors and remount the filesystem read-only. Thats all well and good, only when the SAN is fixed I can't figure out how to re-re-mount the filesystem read-write without rebooting. Behold: [root@localhost ~]# multipath -ll mpath0 (36001f93000a310000299000200000000) dm-2 XIOTECH,ISE1400 [size=1.1T][features=1 queue_if_no_path][hwhandler=0][rw] \_ round-robin 0 [prio=2][active] \_ 1:0:0:1 sdb 8:16 [active][ready] \_ 2:0:0:1 sdc 8:32 [active][ready] [root@localhost ~]# mount /dev/mapper/mpath0 /mnt/foo [root@localhost ~]# touch /mnt/foo/blah All good, now I yank the LUN out from under it. [root@localhost ~]# touch /mnt/foo/blah [root@localhost ~]# touch /mnt/foo/blah touch: cannot touch `/mnt/foo/blah': Read-only file system [root@localhost ~]# tail /var/log/messages Mar 18 13:17:33 localhost multipathd: sdb: tur checker reports path is down Mar 18 13:17:34 localhost multipathd: sdc: tur checker reports path is down Mar 18 13:17:35 localhost kernel: Aborting journal on device dm-2. Mar 18 13:17:35 localhost kernel: Buffer I/O error on device dm-2, logical block 1545 Mar 18 13:17:35 localhost kernel: lost page write due to I/O error on dm-2 Mar 18 13:17:36 localhost kernel: ext3_abort called. Mar 18 13:17:36 localhost kernel: EXT3-fs error (device dm-2): ext3_journal_start_sb: Detected aborted journal Mar 18 13:17:36 localhost kernel: Remounting filesystem read-only It only thinks its read-only, in reality its not even there. [root@localhost ~]# multipath -ll sdb: checker msg is "tur checker reports path is down" sdc: checker msg is "tur checker reports path is down" mpath0 (36001f93000a310000299000200000000) dm-2 XIOTECH,ISE1400 [size=1.1T][features=0][hwhandler=0][rw] \_ round-robin 0 [prio=0][enabled] \_ 1:0:0:1 sdb 8:16 [failed][faulty] \_ 2:0:0:1 sdc 8:32 [failed][faulty] [root@localhost ~]# ll /mnt/foo/ ls: reading directory /mnt/foo/: Input/output error total 20 -rw-r--r-- 1 root root 0 Mar 18 13:11 bar How it still remembers that 'bar' file being there... mystery, but not important right now. Now I re-present the LUN: [root@localhost ~]# tail /var/log/messages Mar 18 13:23:58 localhost multipathd: sdb: tur checker reports path is up Mar 18 13:23:58 localhost multipathd: 8:16: reinstated Mar 18 13:23:58 localhost multipathd: mpath0: queue_if_no_path enabled Mar 18 13:23:58 localhost multipathd: mpath0: Recovered to normal mode Mar 18 13:23:58 localhost multipathd: mpath0: remaining active paths: 1 Mar 18 13:23:58 localhost multipathd: dm-2: add map (uevent) Mar 18 13:23:58 localhost multipathd: dm-2: devmap already registered Mar 18 13:23:59 localhost multipathd: sdc: tur checker reports path is up Mar 18 13:23:59 localhost multipathd: 8:32: reinstated Mar 18 13:23:59 localhost multipathd: mpath0: remaining active paths: 2 Mar 18 13:23:59 localhost multipathd: dm-2: add map (uevent) Mar 18 13:23:59 localhost multipathd: dm-2: devmap already registered [root@localhost ~]# multipath -ll mpath0 (36001f93000a310000299000200000000) dm-2 XIOTECH,ISE1400 [size=1.1T][features=1 queue_if_no_path][hwhandler=0][rw] \_ round-robin 0 [prio=2][enabled] \_ 1:0:0:1 sdb 8:16 [active][ready] \_ 2:0:0:1 sdc 8:32 [active][ready] Great right? It says [rw] right there. Not so fast: [root@localhost ~]# touch /mnt/foo/blah touch: cannot touch `/mnt/foo/blah': Read-only file system OK, doesn't do it automatically, I'll just give it a little push: [root@localhost ~]# mount -o remount /mnt/foo mount: block device /dev/mapper/mpath0 is write-protected, mounting read-only The hell you are: [root@localhost ~]# mount -o remount,rw /mnt/foo mount: block device /dev/mapper/mpath0 is write-protected, mounting read-only Noooooooooo. I have tried all sorts of different mount/tune2fs/dmsetup commands and I cannot figure out how to get it to un-flag the block device as write-protected. Rebooting will fix it, but I'd much rather do it on-line. An hour of googling has gotten me nowhere either. Save me ServerFault.

  Read the article

• Java EE 6 and NoSQL/MongoDB on GlassFish using JPA and EclipseLink 2.4 (TOTD #175)

  - by arungupta

  TOTD #166 explained how to use MongoDB in your Java EE 6 applications. The code in that tip used the APIs exposed by the MongoDB Java driver and so requires you to learn a new API. However if you are building Java EE 6 applications then you are already familiar with Java Persistence API (JPA). Eclipse Link 2.4, scheduled to release as part of Eclipse Juno, provides support for NoSQL databases by mapping a JPA entity to a document. Their wiki provides complete explanation of how the mapping is done. This Tip Of The Day (TOTD) will show how you can leverage that support in your Java EE 6 applications deployed on GlassFish 3.1.2. Before we dig into the code, here are the key concepts ... A POJO is mapped to a NoSQL data source using @NoSQL or <no-sql> element in "persistence.xml". A subset of JPQL and Criteria query are supported, based upon the underlying data store Connection properties are defined in "persistence.xml" Now, lets lets take a look at the code ... Download the latest EclipseLink 2.4 Nightly Bundle. There is a Installer, Source, and Bundle - make sure to download the Bundle link (20120410) and unzip. Download GlassFish 3.1.2 zip and unzip. Install the Eclipse Link 2.4 JARs in GlassFish Remove the following JARs from "glassfish/modules": org.eclipse.persistence.antlr.jar org.eclipse.persistence.asm.jar org.eclipse.persistence.core.jar org.eclipse.persistence.jpa.jar org.eclipse.persistence.jpa.modelgen.jar org.eclipse.persistence.moxy.jar org.eclipse.persistence.oracle.jar Add the following JARs from Eclipse Link 2.4 nightly build to "glassfish/modules": org.eclipse.persistence.antlr_3.2.0.v201107111232.jar org.eclipse.persistence.asm_3.3.1.v201107111215.jar org.eclipse.persistence.core.jpql_2.4.0.v20120407-r11132.jar org.eclipse.persistence.core_2.4.0.v20120407-r11132.jar org.eclipse.persistence.jpa.jpql_2.0.0.v20120407-r11132.jar org.eclipse.persistence.jpa.modelgen_2.4.0.v20120407-r11132.jar org.eclipse.persistence.jpa_2.4.0.v20120407-r11132.jar org.eclipse.persistence.moxy_2.4.0.v20120407-r11132.jar org.eclipse.persistence.nosql_2.4.0.v20120407-r11132.jar org.eclipse.persistence.oracle_2.4.0.v20120407-r11132.jar Start MongoDB Download latest MongoDB from here (2.0.4 as of this writing). Create the default data directory for MongoDB as: sudo mkdir -p /data/db/sudo chown `id -u` /data/db Refer to Quickstart for more details. Start MongoDB as: arungup-mac:mongodb-osx-x86_64-2.0.4 <arungup> ->./bin/mongod./bin/mongod --help for help and startup optionsMon Apr  9 12:56:02 [initandlisten] MongoDB starting : pid=3124 port=27017 dbpath=/data/db/ 64-bit host=arungup-mac.localMon Apr  9 12:56:02 [initandlisten] db version v2.0.4, pdfile version 4.5Mon Apr  9 12:56:02 [initandlisten] git version: 329f3c47fe8136c03392c8f0e548506cb21f8ebfMon Apr  9 12:56:02 [initandlisten] build info: Darwin erh2.10gen.cc 9.8.0 Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386 i386 BOOST_LIB_VERSION=1_40Mon Apr  9 12:56:02 [initandlisten] options: {}Mon Apr  9 12:56:02 [initandlisten] journal dir=/data/db/journalMon Apr  9 12:56:02 [initandlisten] recover : no journal files present, no recovery neededMon Apr  9 12:56:02 [websvr] admin web console waiting for connections on port 28017Mon Apr  9 12:56:02 [initandlisten] waiting for connections on port 27017 Check out the JPA/NoSQL sample from SVN repository. The complete source code built in this TOTD can be downloaded here. Create Java EE 6 web app Create a Java EE 6 Maven web app as: mvn archetype:generate -DarchetypeGroupId=org.codehaus.mojo.archetypes -DarchetypeArtifactId=webapp-javaee6 -DgroupId=model -DartifactId=javaee-nosql -DarchetypeVersion=1.5 -DinteractiveMode=false Copy the model files from the checked out workspace to the generated project as: cd javaee-nosqlcp -r ~/code/workspaces/org.eclipse.persistence.example.jpa.nosql.mongo/src/model src/main/java Copy "persistence.xml" mkdir src/main/resources cp -r ~/code/workspaces/org.eclipse.persistence.example.jpa.nosql.mongo/src/META-INF ./src/main/resources Add the following dependencies: <dependency> <groupId>org.eclipse.persistence</groupId> <artifactId>org.eclipse.persistence.jpa</artifactId> <version>2.4.0-SNAPSHOT</version> <scope>provided</scope></dependency><dependency> <groupId>org.eclipse.persistence</groupId> <artifactId>org.eclipse.persistence.nosql</artifactId> <version>2.4.0-SNAPSHOT</version></dependency><dependency> <groupId>org.mongodb</groupId> <artifactId>mongo-java-driver</artifactId> <version>2.7.3</version></dependency> The first one is for the EclipseLink latest APIs, the second one is for EclipseLink/NoSQL support, and the last one is the MongoDB Java driver. And the following repository: <repositories> <repository> <id>EclipseLink Repo</id> <url>http://www.eclipse.org/downloads/download.php?r=1&amp;nf=1&amp;file=/rt/eclipselink/maven.repo</url> <snapshots> <enabled>true</enabled> </snapshots> </repository>  </repositories> Copy the "Test.java" to the generated project: mkdir src/main/java/examplecp -r ~/code/workspaces/org.eclipse.persistence.example.jpa.nosql.mongo/src/example/Test.java ./src/main/java/example/ This file contains the source code to CRUD the JPA entity to MongoDB. This sample is explained in detail on EclipseLink wiki. Create a new Servlet in "example" directory as: package example;import java.io.IOException;import java.io.PrintWriter;import javax.servlet.ServletException;import javax.servlet.annotation.WebServlet;import javax.servlet.http.HttpServlet;import javax.servlet.http.HttpServletRequest;import javax.servlet.http.HttpServletResponse;/** * @author Arun Gupta */@WebServlet(name = "TestServlet", urlPatterns = {"/TestServlet"})public class TestServlet extends HttpServlet { protected void processRequest(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { response.setContentType("text/html;charset=UTF-8"); PrintWriter out = response.getWriter(); try { out.println("<html>"); out.println("<head>"); out.println("<title>Servlet TestServlet</title>"); out.println("</head>"); out.println("<body>"); out.println("<h1>Servlet TestServlet at " + request.getContextPath() + "</h1>"); try { Test.main(null); } catch (Exception ex) { ex.printStackTrace(); } out.println("</body>"); out.println("</html>"); } finally { out.close(); } } @Override protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { processRequest(request, response); } @Override protected void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { processRequest(request, response); }} Build the project and deploy it as: mvn clean packageglassfish3/bin/asadmin deploy --force=true target/javaee-nosql-1.0-SNAPSHOT.war Accessing http://localhost:8080/javaee-nosql/TestServlet shows the following messages in the server.log: connecting(EISLogin( platform=> MongoPlatform user name=> "" MongoConnectionSpec())) . . .Connected: User: Database: 2.7  Version: 2.7 . . .Executing MappedInteraction() spec => null properties => {mongo.collection=CUSTOMER, mongo.operation=INSERT} input => [DatabaseRecord( CUSTOMER._id => 4F848E2BDA0670307E2A8FA4 CUSTOMER.NAME => AMCE)]. . .Data access result: [{TOTALCOST=757.0, ORDERLINES=[{DESCRIPTION=table, LINENUMBER=1, COST=300.0}, {DESCRIPTION=balls, LINENUMBER=2, COST=5.0}, {DESCRIPTION=rackets, LINENUMBER=3, COST=15.0}, {DESCRIPTION=net, LINENUMBER=4, COST=2.0}, {DESCRIPTION=shipping, LINENUMBER=5, COST=80.0}, {DESCRIPTION=handling, LINENUMBER=6, COST=55.0},{DESCRIPTION=tax, LINENUMBER=7, COST=300.0}], SHIPPINGADDRESS=[{POSTALCODE=L5J1H7, PROVINCE=ON, COUNTRY=Canada, CITY=Ottawa,STREET=17 Jane St.}], VERSION=2, _id=4F848E2BDA0670307E2A8FA8,DESCRIPTION=Pingpong table, CUSTOMER__id=4F848E2BDA0670307E2A8FA7, BILLINGADDRESS=[{POSTALCODE=L5J1H8, PROVINCE=ON, COUNTRY=Canada, CITY=Ottawa, STREET=7 Bank St.}]}] You'll not see any output in the browser, just the output in the console. But the code can be easily modified to do so. Once again, the complete Maven project can be downloaded here. Do you want to try accessing relational and non-relational (aka NoSQL) databases in the same PU ?

  Read the article

• Opensuse 11.1 KDE4 Dropbox autostart issue

  - by OpensuseNewbie

  I am using KDE4 with the lastest version of opensuse, and I want to autostart everytime I turn on my computer. I followed this website: http://antrix.net/journal/techtalk/dropbox%5Fkde.html I got dropbox to work and everything is fine. I created a symlink to the dropboxd file to my ~/.kde4/AUtostart, but does not work. The command line I used to create the symlink is: ln -s ~/.dropbox-dist/dropdoxd ~/.kde4/Autostart/ I've check the symlink itself to see where it "pointed to" in it's properties, and it was the right file. The drobox-dist folder is in my /home/"username", and the dropboxd does work. I've tried using "sudo ln -s ~/.dropbox-dist/dropdoxd ~/.kde4/Autostart/" but no symlink was created. I've checked other blogs and they all say the same things to make dropbox to autostart up, yet it is not working. Does anyone know what's wrong?

  Read the article

• httpd not starting with systemd on F17

  - by malfy

  Title says it all. This is a fresh Fedora 17 system running on a Xen hypervisor. No idea why it won't start [root@box~]  uname -a Linux box.localhost 3.5.4-2.fc17.i686.PAE #1 SMP Wed Sep 26 22:10:23 UTC 2012 i686 i686 i386 GNU/Linux [root@box~]  cat /etc/redhat-release Fedora release 17 (Beefy Miracle) [root@box~]  systemctl enable httpd.service ln -s '/usr/lib/systemd/system/httpd.service' '/etc/systemd/system/multi-user.target.wants/httpd.service' [root@box~]  systemctl start httpd.service Job failed. See system journal and 'systemctl status' for details. [root@box~]  systemctl status httpd.service httpd.service - The Apache HTTP Server (prefork MPM) Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled) Active: failed (Result: exit-code) since Fri, 19 Oct 2012 22:43:37 -0500; 3s ago Process: 18225 ExecStart=/usr/sbin/httpd $OPTIONS -k start (code=exited, status=226/NAMESPACE) CGroup: name=systemd:/system/httpd.service Oct 19 22:43:37 box.localhost systemd[18225]: Failed at step NAMESPACE spawning /usr/sbin/httpd: No such file or directory [root@box~]  ls -al /usr/sbin/httpd -rwxr-xr-x 1 root root 343496 Apr 30 04:56 /usr/sbin/httpd

  Read the article

• Deleted items on Deleted Items folder are not shown

  - by Ken

  When I run this cmdlet, I get the following result: [PS] C:\Windows\system32Get-MailboxFolderStatistics user | ft FolderPath, FolderSize -autosize FolderPath FolderSize ---------- ---------- /Top of Information Store 156 B (156 bytes) /Calendar 244.2 KB (250,025 bytes) /Contacts 1.223 MB (1,282,252 bytes) /Contacts/SenderPhotoContacts 30.41 KB (31,139 bytes) /Conversation Action Settings 0 B (0 bytes) /Conversation History 206.2 KB (211,147 bytes) /Deleted Items 1.449 MB (1,519,602 bytes) /Drafts 472 B (472 bytes) /Inbox 618 MB (648,025,798 bytes) /Journal 144 B (144 bytes) /Junk E-Mail 131.9 KB (135,089 bytes) /News Feed 0 B (0 bytes) /Notes 1.847 KB (1,891 bytes) /Outbox 0 B (0 bytes) /Quick Step Settings 0 B (0 bytes) /RSS Feeds 0 B (0 bytes) /Sent Items 6.754 KB (6,916 bytes) /Suggested Contacts 9.316 KB (9,540 bytes) /Sync Issues 0 B (0 bytes) /Sync Issues/Conflicts 0 B (0 bytes) /Sync Issues/Local Failures 0 B (0 bytes) /Sync Issues/Server Failures 0 B (0 bytes) /Tasks 7.994 KB (8,186 bytes) /Recoverable Items 12.16 MB (12,748,519 bytes) /Deletions 0 B (0 bytes) /Purges 0 B (0 bytes) /Versions 0 B (0 bytes) But when I open the mailbox using both Outlook and OWA, the deleted items folder is empty. I'm guessing it's corrupted or something like that. Is it possible to recover it somehow? Thanks.

  Read the article

• Secondary drive corrupted/not reading

  - by Sebastian

  When I connect my Seagate Barracuda to the computer, it shows up on the list of drives in Windows Explorer, but right clicking on it crashes Windows Explorer, opening it won't do anything, and I cannot start disk manager when it is connected. Trying to search the drive also freezes Windows Explorer. I have tried to run CHKDSK on it, and it was "unable to read $J data stream" for the Usn Journal. Also, it was an internal drive, but I pulled it out and hooked it up externally so I could test if it was that drive causing the problems. Is there any way for me to copy the files off of the drive?

  Read the article

• Apache won't start after creating symbolic link

  - by Carlin

  I'm installing apache for the first time and trying to display some webpages on localhost. Apache's default path for serving web pages is /var/www/html/ but I don't have permissions to write there. Rather than change ownership of the entire directory, I decided to get rid of the /html/ folder in /var/www/ and created it in my home directory. Then I made a symbolic link ln -s /home/me/html/ /var/www/ hoping Apache would serve web pages from my home directory while keeping the default path and following the symbolic link to my home directory. When I go to start the apache service with service httpd start I get Job failed. See system journal and 'systemctl status' for details.

  Read the article

• Deleted items on Deleted Items folder are not shown

  - by Ken

  When I run this cmdlet, I get the following result: Get-MailboxFolderStatistics user | ft FolderPath, FolderSize -autosize FolderPath FolderSize ---------- ---------- /Top of Information Store 156 B (156 bytes) /Calendar 244.2 KB (250,025 bytes) /Contacts 1.223 MB (1,282,252 bytes) /Contacts/SenderPhotoContacts 30.41 KB (31,139 bytes) /Conversation Action Settings 0 B (0 bytes) /Conversation History 206.2 KB (211,147 bytes) /Deleted Items 1.449 MB (1,519,602 bytes) /Drafts 472 B (472 bytes) /Inbox 618 MB (648,025,798 bytes) /Journal 144 B (144 bytes) /Junk E-Mail 131.9 KB (135,089 bytes) /News Feed 0 B (0 bytes) /Notes 1.847 KB (1,891 bytes) /Outbox 0 B (0 bytes) /Quick Step Settings 0 B (0 bytes) /RSS Feeds 0 B (0 bytes) /Sent Items 6.754 KB (6,916 bytes) /Suggested Contacts 9.316 KB (9,540 bytes) /Sync Issues 0 B (0 bytes) /Sync Issues/Conflicts 0 B (0 bytes) /Sync Issues/Local Failures 0 B (0 bytes) /Sync Issues/Server Failures 0 B (0 bytes) /Tasks 7.994 KB (8,186 bytes) /Recoverable Items 12.16 MB (12,748,519 bytes) /Deletions 0 B (0 bytes) /Purges 0 B (0 bytes) /Versions 0 B (0 bytes) But when I open the mailbox using both Outlook and OWA, the deleted items folder is empty. I'm guessing it's corrupted or something like that. Is it possible to recover it somehow? Thanks.

  Read the article

• reiserfsck --rebuild-tree failed: Not enough allocable blocks

  - by mojo

  I have a reiserfs volume that required a --rebuild-tree, but is currently failing to complete when I pass it --rebuild-tree. Here is the output that I receive when running it: reiserfsck 3.6.19 (2003 www.namesys.com) # reiserfsck --rebuild-tree started at Mon Oct 26 13:22:16 2009 # Pass 0: # Pass 0 The whole partition (7864320 blocks) is to be scanned Skipping 8450 blocks (super block, journal, bitmaps) 7855870 blocks will be read 0%....20%....40%....60%....80%....100% left 0, 9408 /sec 287884 directory entries were hashed with "r5" hash. "r5" hash is selected Flushing..finished Read blocks (but not data blocks) 7855870 Leaves among those 6105606 Objectids found 287892 Pass 1 (will try to insert 6105606 leaves): # Pass 1 Looking for allocable blocks .. finished 0%....20%....40%....60%....80%....Not enough allocable blocks, checking bitmap...there are 1 allocable blocks, btw out of disk space Aborted I can't mount it, and I can't fsck it. I've tried extending the volume, but that hasn't helped either.

  Read the article

• How can I connect a SAS drive to USB? [closed]

  - by dave

  I have a Dell T710 with Seagate Cheetah 15k.7 SAS disks. If the T710 motherboard dies, I'll need to resort to one of my nightly off-site backups and salvage the journal/logfile from the SAS disk to bring the backup bang up-to-date. I need a way of reading the healthy-but-inaccessible SAS disc that does not depend on the only SAS-capable machine I have to hand. So I bought: SAS to SATA Adapter and: USB 2.0 to SATA Adapter with Power ...so that I could read the SAS drive via USB. I can plug it all together just fine. The chain looks like: USB - SATA - SAS. But the drive does not spin up and the computer doesn't even acknowledge anything being attached by USB. Is there a cheap external enclosure I can buy for SAS drives? I can't believe these USB to SATA adapters are everywhere but the USB to SAS adapters are almost non-existent...

  Read the article

• Suppress EXT3-fs warning on mount

  - by STM

  I am familiar with output suppress on Unix machines, ie: cat /file/that/doesnt/exist > /dev/null 2>& However I can't seem to suppress the output of mount when an ext3 filesystem is mounted for the nth time, and it recommends an fsck. As it happens, fscks are run regularly by another machine, so these warning messages are needlessly interrupting the flow of output to my pretty bash script. These are the errors: # mount -t ext3 /dev/sda1 /mnt > /dev/null 2>& kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. Can anyone shed some light on this? I'm clearly blocking both fd's, but somehow output is still getting through. This is GNU Bash v2.05a

  Read the article

• reiserfsck --rebuild-tree failed: Not enough allocable blocks

  - by mojo

  I have a reiserfs volume that required a --rebuild-tree, but is currently failing to complete when I pass it --rebuild-tree. Here is the output that I receive when running it: reiserfsck 3.6.19 (2003 www.namesys.com) # reiserfsck --rebuild-tree started at Mon Oct 26 13:22:16 2009 # Pass 0: # Pass 0 The whole partition (7864320 blocks) is to be scanned Skipping 8450 blocks (super block, journal, bitmaps) 7855870 blocks will be read 0%....20%....40%....60%....80%....100% left 0, 9408 /sec 287884 directory entries were hashed with "r5" hash. "r5" hash is selected Flushing..finished Read blocks (but not data blocks) 7855870 Leaves among those 6105606 Objectids found 287892 Pass 1 (will try to insert 6105606 leaves): # Pass 1 Looking for allocable blocks .. finished 0%....20%....40%....60%....80%....Not enough allocable blocks, checking bitmap...there are 1 allocable blocks, btw out of disk space Aborted I can't mount it, and I can't fsck it. I've tried extending the volume, but that hasn't helped either.

  Read the article

• Trying to make changes to the size of the events buffer in prelude-ids auditd plugin

  - by tharris

  I am running systems using the prelude-ids plugin for auditd. When the manager is up every thing works fine however I have a requirement that when the clients can't talk to the manager they should store no more than 250MB of messages, and when they hit that point they should start deleting the oldest events. All I can find is that audispd can be set to an overflow action of ignore,syslog,suspend,single, and halt none of which meet my requirement, and several of which I really cannot use. Does anyone know a way to do this? I know the events get stored in /var/spool/prelude/auditd/global, but I can't find anything about configuring how things are stored here. There are usually several files in the global directory but only 2 of them ever go above 0 in size, data0 and data0.journal.

  Read the article

• Has anyone evaluated NuttX RTOS?

  - by DoxaLogos

  While reading Linux User's Journal today, I stumbled across a little blurb about NuttX RTOS. I checked out their website and was fairly impressed with its feature set and its ability to put it in an 8052! I find it interesting that it supports POSIX which is something I have helped worked on for one of my clients in-house RTOS. This one seems a little more feature rich than the in-house RTOS. Has anyone else heard of NuttX and has given it a try? If so, how does it compare to other RTOS's such as FreeRTOS?

  Read the article

• Repair Lacie 2Big Network 2

  - by Donier

  hi i buy from you Lacie 2big network 2 I was have problem with drive 2 "missed" then i try format HDD to mac os journal end RAW Now i can't connect to the device from network asistant please hep me I can't connect to Doshboard and i can't connect from USB on Lacie 2 big network 2device. I can connect to HDD from Lacie 2big network 2. how create lacie doshbaoard boot on HDD device. i format disks because one of HDD is work not correctly... in the Dashboard RAID menu disk 2 missed.... Thank you i wiil wait your answer....

  Read the article

• Filesystem to quickly get recent modifications

  - by liori

  Hello, I've got relatively big filesystem (ext4) with lots of small files and I'd like to backup it. Making full backups often is not feasible to me so I want to have a way to make differential/incremental backups (differential preferred). But... this is laptop, and scanning for changed files takes lots of time. My questions: 1) Is it possible to get list of files changed since some date from ext4's journal? I know it wasn't designed with this idea in mind, and it might be too small for bigger timespans, but maybe it is somehow possible? 2) Is it possible to monitor filesystem modifications and maintain a list of changed files reliably? I think I could use inotify, but this might be too slow to monitor full filesystem and might be unreliable. (by reliable I mean either I get all modifications since last backup (and this list is not missing anything) or an error message). Laptop runs Debian unstable.

  Read the article

• Exceptions from automongobackup, yet script completes

  - by chakram88

  I am using automongobackup to, well, automate the backups of mongodb. output from the script (to STDERR) has the following exceptions (but the backup completes, and the dump files are created) ###### WARNING ###### STDERR written to during mongodump execution. The backup probably succeeded, as mongodump sometimes writes to STDERR, but you may wish to scan the error log below: exception: connect failed exception: connect failed exception: connect failed exception: connect failed exception: HostAndPort: bad port # exception: connect failed exception: connect failed exception: connect failed exception: connect failed exception: connect failed exception: connect failed I know that the Host & Port are correct. If I run mongodump --host=127.0.0.1:27017 --journal (which is the effective command from automongobackup based on the options set and my reading of the src code) everything runs clean without any error reporting and the dump files are created as expected. Why would automongobackup report connection errors, even tho it does create the dump files, yet a straight call to mongodump does not? Debian 6.0 Lenny (from Linode image: Latest 3.2 (3.2.1-x86_64-linode23)) AutoMongoBackup VER 0.9 mongodb v 2.0.2

  Read the article

• E2K7: Can't add jounaling mailbox to storage group

  - by Agent

  We just added a new SG to a standalone E2K7 server but Exchange pops an error when we try to enable journaling on it. The journal recipient mailbox was created a while back and as far as we can tell there are no issues with it. It's viewable in the GAL and accessible through OWA. The error is: Set-Mailboxdatabase Error:Obkect "domain.company.com/Journaling/Journal5" could not be found. Please make sure that it was spelled correctly or specify a different object. This Journal5 account is in a child domain (like all the other journaling mailboxes we have attached to other mailbox server SGs). We also tried attaching one of the working journaling mailboxes to this SG but they also popped back the same error. Event log is now showing any errors at all. We are running SP1 on this server. I've tried dismounting/remounting the store and bouncing the IS and SA services but that didn't help any. Any suggestions?

  Read the article

• Programming concepts taken from the arts and humanities

  - by Joey Adams

  After reading Paul Graham's essay Hackers and Painters and Joel Spolsky's Advice for Computer Science College Students, I think I've finally gotten it through my thick skull that I should not be loath to work hard in academic courses that aren't "programming" or "computer science" courses. To quote the former: I've found that the best sources of ideas are not the other fields that have the word "computer" in their names, but the other fields inhabited by makers. Painting has been a much richer source of ideas than the theory of computation. — Paul Graham, "Hackers and Painters" There are certainly other, much stronger reasons to work hard in the "boring" classes. However, it'd also be neat to know that these classes may someday inspire me in programming. My question is: what are some specific examples where ideas from literature, art, humanities, philosophy, and other fields made their way into programming? In particular, ideas that weren't obviously applied the way they were meant to (like most math and domain-specific knowledge), but instead gave utterance or inspiration to a program's design and choice of names. Good examples: The term endian comes from Gulliver's Travels by Tom Swift (see here), where it refers to the trivial matter of which side people crack open their eggs. The terms journal and transaction refer to nearly identical concepts in both filesystem design and double-entry bookkeeping (financial accounting). mkfs.ext2 even says: Writing superblocks and filesystem accounting information: done Off-topic: Learning to write English well is important, as it enables a programmer to document and evangelize his/her software, as well as appear competent to other programmers online. Trigonometry is used in 2D and 3D games to implement rotation and direction aspects. Knowing finance will come in handy if you want to write an accounting package. Knowing XYZ will come in handy if you want to write an XYZ package. Arguably on-topic: The Monad class in Haskell is based on a concept by the same name from category theory. Actually, Monads in Haskell are monads in the category of Haskell types and functions. Whatever that means...

  Read the article

• SQL SERVER- Differences Between Left Join and Left Outer Join

  - by pinaldave

  There are a few questions that I had decided not to discuss on this blog because I think they are very simple and many of us know it. Many times, I even receive not-so positive notes from several readers when I am writing something simple. However, assuming that we know all and beginners should know everything is not the right attitude. Since day 1, I have been keeping a small journal regarding questions that I receive in this blog. There are around 200+ questions I receive every day through emails, comments and occasional phone calls. Yesterday, I received a comment with the following question: What are the differences between Left Join and Left Outer Join? Click here to read original comment. This question has triggered the threshold of receiving the same question repeatedly. Here is the answer: There is absolutely no difference between LEFT JOIN and LEFT OUTER JOIN. The same is true for RIGHT JOIN and RIGHT OUTER JOIN. When you use LEFT JOIN keyword in SQL Server, it means LEFT OUTER JOIN only. I have already written in-depth visual diagram discussing the JOINs. I encourage all of you to read the article for further understanding of the JOINs: Read Introduction to JOINs – Basic of JOINs Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Joins, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Fix corrupt NTFS partition without Windows

  - by Capt.Nemo

  MY NTFS Partition has gotten corrupt somehow (it's a relic from the days when I had Windows installed). I'm putting the debug output of fdisk and blkid here. At the same time, any OS is unable to mount my root partition, which is located next to my NTFS partition. I'm not sure if this has anything to do with it, though. I get the following error while trying to mount my root partition (sda5) mount: wrong fs type, bad option, bad superblock on /dev/sda5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so ubuntu@ubuntu:~$ dmesg | tail [ 1019.726530] Descriptor sense data with sense descriptors (in hex): [ 1019.726533] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 1019.726551] 1a 3e ed 92 [ 1019.726558] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 1019.726568] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 1a 3e ed 40 00 01 00 00 [ 1019.726584] end_request: I/O error, dev sda, sector 440331666 [ 1019.726602] JBD: Failed to read block at offset 462 [ 1019.726609] ata1: EH complete [ 1019.726612] JBD: recovery failed [ 1019.726617] EXT4-fs (sda5): error loading journal When I open gparted (using live CD), I get an exclamation next to my NTFS drive which states Is there a way to run chkdsk without using windows ? My attempt to run fsck results in the following : ubuntu@ubuntu:~$ sudo fsck /dev/sda fsck from util-linux-ng 2.17.2 e2fsck 1.41.14 (22-Dec-2010) fsck.ext2: Superblock invalid, trying backup blocks... fsck.ext2: Bad magic number in super-block while trying to open /dev/sda The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> Update : I was able to fix the NTFS partition running chkdsk off HBCD, but it seems that the superblock problem still remains. *Update 2: * Fixed superblock issue using e2fsck -c /dev/sda5

  Read the article

• London Hotel Gives iPad For Guest During Their Stay

  - by Gopinath

  The Brits are still waiting for the launch of iPad but a luxurious hotel, The Berkeley, located in London is offering its guest an iPad during their stay in the luxurious suites. The iPads are pre-loaded with a range of customized apps designed by the hotel for enriching the London experience of their guests.  The hotel explains From Le Monde to the Wall Street Journal, your local newspaper will be available at breakfast and quickly checking the opening times of Christian Louboutin on Motcomb Street has never been more convenient. A wide range of games, videos and comic books is available for children and our experienced Concierge team has created their personal Top 5 of must-visit places – shops, exhibitions, local attractions and some hidden gems – which are clearly mapped so that you can plan your itinerary. The Berkeley hotel is enjoying the free publicity it’s getting across the globe as they are the first one to introduce iPads in London hotels. And the Apple too, for being a symbol of luxurious gadgets. By the did I tell you that each night stay at the luxurious suites of the hotel costs around $2804? This money seems to be far more than the required  to travel to US, grab an iPad and return back home. Join us on Facebook to read all our stories right inside your Facebook news feed.

  Read the article

• eXML-PARSER output contains unwanted hash references

  - by seaworthy

  So I wrote a parser routine to take one xml file and reparse into another one. This code I later modified to split a large xml file into many small xml files. I am having a problem with an output. Parsing works fine the only thing output also includes unwanted strings like HASH(0x19f9b58), I am not sure why and need set of friendly eyes. use Encode; use XML::Parser; my $parser = XML::Parser->new( Handlers => {Start => \&handle_elem_start, End => \&handle_elem_end,Char => \&handle_char_data,}); my $record; my $file = shift @ARGV; if( $file ) {$parser->parsefile( $file );} exit; sub handle_elem_start { my( $expat, $name, %atts ) = @_; if ($name eq 'articles'){$file="_data.xml";unlink($file);} $record .= "<"; $record .= "$name"; foreach my $key (keys %atts){$record .= " $key=\"$atts{$key}\"";} $record .= ">"; } sub handle_char_data { my( $expat, $text ) = @_; $text = decode_utf8( $text ); $record .= "$text"; } sub handle_elem_end { my( $expat, $name ) = @_; $record .= "</$name>"; if( $name eq 'article' ) { open (MYFILE, '>>'.$file); print MYFILE $record; close (MYFILE); print $record; $record = {}; } return unless( $name eq 'article' ); } Sample output: ... </article>HASH(0x19f9b40) <article doi="10.1103/PhysRevSeriesI.9.304"> <journal short="Phys. Rev. (Series I)" jcode="PRI">Physical Review (Series I)</journal> <volume>9</volume> <issue printdate="1899-11-00">5</issue> <fpage>304</fpage> <lpage>309</lpage> <seqno>1</seqno> <price></price><tocsec>Articles</tocsec> <arttype type="article"></arttype><doi>10.1103/PhysRevSeriesI.9.304</doi> <title>An Investigation of the Magnetic Qualities of Building Brick</title> <authgrp> <author><givenname>O.</givenname><middlename>A.</middlename><surname>Gage</surname></author> <author><givenname>H.</givenname><middlename>E.</middlename><surname>Lawrence</surname></author> </authgrp> <cpyrt> <cpyrtdate date="1899"></cpyrtdate><cpyrtholder>The American Physical Society</cpyrtholder> </cpyrt> </article>HASH(0x19f9b58) ... HASH strings are not wanted, please advise.

  Read the article

• pdflatex reads .eps files saved in OS/X, but not in Ubuntu

  - by David B Borenstein

  Sorry if this is a stupid question; I'm a newbie. I am preparing a manuscript in LaTeX. The journal (Physical Biology, an IOP publication) requires that figures be saved in .eps format, so I am trying to do that. However, I cannot get my LaTeX file to build when I have generated the .eps files on my Ubuntu computer. If I save the images on my Mac, the file build just fine. So far, I have tried saving images in ImageJ, FIJI and Inkscape. The same problem occurs in all three. When using kile, I get the following error: /usr/share/texmf-texlive/tex/latex/oberdiek/epstopdf-base.sty:0: Shell escape feature is not enabled. In TexWorks, the error is different, but still there: Package pdftex.def Error: File `./figures4/figure4a-eps-converted-to.pdf' not found. Now, if I fire up Inkscape, FIJI or ImageJ on OS/X, everything works fine. The Mac also can't build with the Ubuntu-saved images. The images generated on the Ubuntu machine open fine using Document Viewer. I am building the same LaTeX file on both computers, with the exact same results. The header of my LaTeX file is: \documentclass[12pt]{iopart} \usepackage{graphicx} \usepackage{epstopdf} \usepackage{parskip} \usepackage{color} \usepackage{iopams} And then the code for the figure is: \begin{figure} \center{\includegraphics[width=4in] {./figures4/figure4a.eps}} \footnotesize{\caption{ \label{fig:4a} (4a) lorem ipsum dolor sic amet.}} \end{figure} I'd be happy to send an example of both .eps files. Again, sorry if this is a dumb question. I tried everything I could think of before posting here. Thanks, David

  Read the article

• Continual Professional Development - proving new skills to non-technical employers

  - by Tom

  Background I work in a non-IT based company, as a professional software developer, building a large scale internal database system. I am fortunate to have a fairly senior position within the company, and have been working here for around 4 years. Often I get asked by management "how do you learn new things?". To be honest, I don't know how to answer this. Over the last 6 months, I've really gotten my teeth into some new techniques and technologies to make my level of coding far better and hopefully improve the quality of the software. Even if it's just refreshing my skills on things I've learnt already. Like last week I dived into some complex XLinq and TPL code (.net). Nothing revolutionary, but I feel like I am a bit better than before. Question The question is, how do I prove this to my employer? It'd be nice to be able to put this on paper. Possibilities I could: Keep a journal of what I've learnt - keeping the technical bits in (nobody would understand or care, but it's better than them being omitted) ???? (I've run out of ideas already) Any ideas? Thanks, Tom

  Read the article

< Previous Page | 6 7 8 9 10 11 12 13 14 15  | Next Page >