Search Results

Search found 8828 results on 354 pages for 'the pc samurai'.

Page 10/354 | < Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >

• Move Files from a Failing PC with an Ubuntu Live CD

  - by Trevor Bekolay

  You’ve loaded the Ubuntu Live CD to salvage files from a failing system, but where do you store the recovered files? We’ll show you how to store them on external drives, drives on the same PC, a Windows home network, and other locations. We’ve shown you how to recover data like a forensics expert, but you can’t store recovered files back on your failed hard drive! There are lots of ways to transfer the files you access from an Ubuntu Live CD to a place that a stable Windows machine can access them. We’ll go through several methods, starting each section from the Ubuntu desktop – if you don’t yet have an Ubuntu Live CD, follow our guide to creating a bootable USB flash drive, and then our instructions for booting into Ubuntu. If your BIOS doesn’t let you boot using a USB flash drive, don’t worry, we’ve got you covered! Use a Healthy Hard Drive If your computer has more than one hard drive, or your hard drive is healthy and you’re in Ubuntu for non-recovery reasons, then accessing your hard drive is easy as pie, even if the hard drive is formatted for Windows. To access a hard drive, it must first be mounted. To mount a healthy hard drive, you just have to select it from the Places menu at the top-left of the screen. You will have to identify your hard drive by its size. Clicking on the appropriate hard drive mounts it, and opens it in a file browser. You can now move files to this hard drive by drag-and-drop or copy-and-paste, both of which are done the same way they’re done in Windows. Once a hard drive, or other external storage device, is mounted, it will show up in the /media directory. To see a list of currently mounted storage devices, navigate to /media by clicking on File System in a File Browser window, and then double-clicking on the media folder. Right now, our media folder contains links to the hard drive, which Ubuntu has assigned a terribly uninformative label, and the PLoP Boot Manager CD that is currently in the CD-ROM drive. Connect a USB Hard Drive or Flash Drive An external USB hard drive gives you the advantage of portability, and is still large enough to store an entire hard disk dump, if need be. Flash drives are also very quick and easy to connect, though they are limited in how much they can store. When you plug a USB hard drive or flash drive in, Ubuntu should automatically detect it and mount it. It may even open it in a File Browser automatically. Since it’s been mounted, you will also see it show up on the desktop, and in the /media folder. Once it’s been mounted, you can access it and store files on it like you would any other folder in Ubuntu. If, for whatever reason, it doesn’t mount automatically, click on Places in the top-left of your screen and select your USB device. If it does not show up in the Places list, then you may need to format your USB drive. To properly remove the USB drive when you’re done moving files, right click on the desktop icon or the folder in /media and select Safely Remove Drive. If you’re not given that option, then Eject or Unmount will effectively do the same thing. Connect to a Windows PC on your Local Network If you have another PC or a laptop connected through the same router (wired or wireless) then you can transfer files over the network relatively quickly. To do this, we will share one or more folders from the machine booted up with the Ubuntu Live CD over the network, letting our Windows PC grab the files contained in that folder. As an example, we’re going to share a folder on the desktop called ToShare. Right-click on the folder you want to share, and click Sharing Options. A Folder Sharing window will pop up. Check the box labeled Share this folder. A window will pop up about the sharing service. Click the Install service button. Some files will be downloaded, and then installed. When they’re done installing, you’ll be appropriately notified. You will be prompted to restart your session. Don’t worry, this won’t actually log you out, so go ahead and press the Restart session button. The Folder Sharing window returns, with Share this folder now checked. Edit the Share name if you’d like, and add checkmarks in the two checkboxes below the text fields. Click Create Share. Nautilus will ask your permission to add some permissions to the folder you want to share. Allow it to Add the permissions automatically. The folder is now shared, as evidenced by the new arrows above the folder’s icon. At this point, you are done with the Ubuntu machine. Head to your Windows PC, and open up Windows Explorer. Click on Network in the list on the left, and you should see a machine called UBUNTU in the right pane. Note: This example is shown in Windows 7; the same steps should work for Windows XP and Vista, but we have not tested them. Double-click on UBUNTU, and you will see the folder you shared earlier! As well as any other folders you’ve shared from Ubuntu. Double click on the folder you want to access, and from there, you can move the files from the machine booted with Ubuntu to your Windows PC. Upload to an Online Service There are many services online that will allow you to upload files, either temporarily or permanently. As long as you aren’t transferring an entire hard drive, these services should allow you to transfer your important files from the Ubuntu environment to any other machine with Internet access. We recommend compressing the files that you want to move, both to save a little bit of bandwidth, and to save time clicking on files, as uploading a single file will be much less work than a ton of little files. To compress one or more files or folders, select them, and then right-click on one of the members of the group. Click Compress…. Give the compressed file a suitable name, and then select a compression format. We’re using .zip because we can open it anywhere, and the compression rate is acceptable. Click Create and the compressed file will show up in the location selected in the Compress window. Dropbox If you have a Dropbox account, then you can easily upload files from the Ubuntu environment to Dropbox. There is no explicit limit on the size of file that can be uploaded to Dropbox, though a free account begins with a total limit of 2 GB of files in total. Access your account through Firefox, which can be opened by clicking on the Firefox logo to the right of the System menu at the top of the screen. Once into your account, press the Upload button on top of the main file list. Because Flash is not installed in the Live CD environment, you will have to switch to the basic uploader. Click Browse…find your compressed file, and then click Upload file. Depending on the size of the file, this could take some time. However, once the file has been uploaded, it should show up on any computer connected through Dropbox in a matter of minutes. Google Docs Google Docs allows the upload of any type of file – making it an ideal place to upload files that we want to access from another computer. While your total allocation of space varies (mine is around 7.5 GB), there is a per-file maximum of 1 GB. Log into Google Docs, and click on the Upload button at the top left of the page. Click Select files to upload and select your compressed file. For safety’s sake, uncheck the checkbox concerning converting files to Google Docs format, and then click Start upload. Go Online – Through FTP If you have access to an FTP server – perhaps through your web hosting company, or you’ve set up an FTP server on a different machine – you can easily access the FTP server in Ubuntu and transfer files. Just make sure you don’t go over your quota if you have one. You will need to know the address of the FTP server, as well as the login information. Click on Places > Connect to Server… Choose the FTP (with login) Service type, and fill in your information. Adding a bookmark is optional, but recommended. You will be asked for your password. You can choose to remember it until you logout, or indefinitely. You can now browse your FTP server just like any other folder. Drop files into the FTP server and you can retrieve them from any computer with an Internet connection and an FTP client. Conclusion While at first the Ubuntu Live CD environment may seem claustrophobic, it has a wealth of options for connecting to peripheral devices, local computers, and machines on the Internet – and this article has only scratched the surface. Whatever the storage medium, Ubuntu’s got an interface for it! Similar Articles Productive Geek Tips Backup Your Windows Live Writer SettingsMove a Window Without Clicking the Titlebar in UbuntuRecover Deleted Files on an NTFS Hard Drive from a Ubuntu Live CDCreate a Bootable Ubuntu USB Flash Drive the Easy WayReset Your Ubuntu Password Easily from the Live CD TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Tech Fanboys Field Guide Check these Awesome Chrome Add-ons iFixit Offers Gadget Repair Manuals Online Vista style sidebar for Windows 7 Create Nice Charts With These Web Based Tools Track Daily Goals With 42Goals

  Read the article

• Getting the PC speaker to beep

  - by broiyan

  There has been much written on getting the beep sound from Ubuntu releases over the years. Example: fixing the beep My needs are slightly different in that I do not want to ensure sound card beeps are functioning. Instead, I want PC speaker beeps, the kind produced by the original built-in speaker because I believe they will produce less CPU load. I have confirmed that my computer has the PC speaker by unplugging the external speakers and shutting down Ubuntu. At some point in the shutdown and restart process a beep is heard even though the external speakers have no power. I have tried the following: In /etc/modprobe.d/blacklist.conf, turn these lines into comments: #blacklist snd_pcsp #blacklist pcspkr In .bashrc /usr/bin/xset b on /usr/bin/xset b 100 Enable in the gnome terminal: Edit Profile Prefs General Terminal Bell Ensure no "mute" selections in: System Prefs Sound various tabs (uncheck them all). Select "Enable window and button sounds" in: System Prefs Sound Sound Effects In gconf-editor desktop gnome sound, select the three sound check boxes. In gconf-editor apps metacity general select the audible bell check box. Still I get no PC speaker beeps when I send code 7 to the console via my Java program or use echo -e '\a' on the bash command line. What else should I try? Update Since my goal is to minimize load on the CPU, here is a comparison of elapsed times. Each test is for 100,000 iterations. Each variant was performed three times so three results are presented for each. printwriter.format("%c", 7); // 1.3 seconds, 1.5 seconds, 1.5 seconds Toolkit.getDefaultToolkit().beep(); // 0.8 seconds, 0.3 seconds, 0.5 seconds try { Runtime.getRuntime().exec("beep"); } catch (IOException e) { } // 10.3 seconds, 16.3 seconds, 11.4 seconds These runs were done inside Eclipse so multiply by some value less than 1 for standalone execution. Unfortunately, Toolkit's beep is silent on my computer and so is code 7. The beep utility works but has the most cost.

  Read the article

• How could Google Latitude find my exact PC location with no GPS or public wifi?

  - by Mike

  I found a similar question here but I still don't get it. You see, I live in a small town and every time I check my IP location via online services or speed test websites, my location appears to be my ISP server location (which in my case is 250 miles away). But when I tried Google latitude, it pinpointed my exact location within less than 100 meters! I use Windows Vista, Google Chrome, and when I got the message that "Google is trying to locate you", I agreed just to check what the result will be. It was scary, very scary! What I've come up after reading the above link is that Google have a kind of extensive WiFi database locations. That could be understandable with the case of public and open WiFis that are used with a lot of people. Some of them might be using applications that could gather location data and somehow this information ends up in giant Google databases. From those, Google could pinpoint a WiFi location based on its MAC address along with these bits of info that have been gathered via various sources. The issue here is that my WiFi is private, I don't even broadcast my WiFi name. So how on earth did Google find my exact PC location? Please break down the answer in layman's terms as possible.

  Read the article

• Use Autoruns to Manually Clean an Infected PC

  - by Mark Virtue

  There are many anti-malware programs out there that will clean your system of nasties, but what happens if you’re not able to use such a program?  Autoruns, from SysInternals (recently acquired by Microsoft), is indispensable when removing malware manually. There are a few reasons why you may need to remove viruses and spyware manually: Perhaps you can’t abide running resource-hungry and invasive anti-malware programs on your PC You might need to clean your mom’s computer (or someone else who doesn’t understand that a big flashing sign on a website that says “Your computer is infected with a virus – click HERE to remove it” is not a message that can necessarily be trusted) The malware is so aggressive that it resists all attempts to automatically remove it, or won’t even allow you to install anti-malware software Part of your geek credo is the belief that anti-spyware utilities are for wimps Autoruns is an invaluable addition to any geek’s software toolkit.  It allows you to track and control all programs (and program components) that start automatically with Windows (or with Internet Explorer).  Virtually all malware is designed to start automatically, so there’s a very strong chance that it can be detected and removed with the help of Autoruns. We have covered how to use Autoruns in an earlier article, which you should read if you need to first familiarize yourself with the program. Autoruns is a standalone utility that does not need to be installed on your computer.  It can be simply downloaded, unzipped and run (link below).  This makes is ideally suited for adding to your portable utility collection on your flash drive. When you start Autoruns for the first time on a computer, you are presented with the license agreement: After agreeing to the terms, the main Autoruns window opens, showing you the complete list of all software that will run when your computer starts, when you log in, or when you open Internet Explorer: To temporarily disable a program from launching, uncheck the box next to it’s entry.  Note:  This does not terminate the program if it is running at the time – it merely prevents it from starting next time.  To permanently prevent a program from launching, delete the entry altogether (use the Delete key, or right-click and choose Delete from the context-menu)).  Note:  This does not remove the program from your computer – to remove it completely you need to uninstall the program (or otherwise delete it from your hard disk). Suspicious Software It can take a fair bit of experience (read “trial and error”) to become adept at identifying what is malware and what is not.  Most of the entries presented in Autoruns are legitimate programs, even if their names are unfamiliar to you.  Here are some tips to help you differentiate the malware from the legitimate software: If an entry is digitally signed by a software publisher (i.e. there’s an entry in the Publisher column) or has a “Description”, then there’s a good chance that it’s legitimate If you recognize the software’s name, then it’s usually okay.  Note that occasionally malware will “impersonate” legitimate software, but adopting a name that’s identical or similar to software you’re familiar with (e.g. “AcrobatLauncher” or “PhotoshopBrowser”).  Also, be aware that many malware programs adopt generic or innocuous-sounding names, such as “Diskfix” or “SearchHelper” (both mentioned below). Malware entries usually appear on the Logon tab of Autoruns (but not always!) If you open up the folder that contains the EXE or DLL file (more on this below), an examine the “last modified” date, the dates are often from the last few days (assuming that your infection is fairly recent) Malware is often located in the C:\Windows folder or the C:\Windows\System32 folder Malware often only has a generic icon (to the left of the name of the entry) If in doubt, right-click the entry and select Search Online… The list below shows two suspicious looking entries:  Diskfix and SearchHelper These entries, highlighted above, are fairly typical of malware infections: They have neither descriptions nor publishers They have generic names The files are located in C:\Windows\System32 They have generic icons The filenames are random strings of characters If you look in the C:\Windows\System32 folder and locate the files, you’ll see that they are some of the most recently modified files in the folder (see below) Double-clicking on the items will take you to their corresponding registry keys: Removing the Malware Once you’ve identified the entries you believe to be suspicious, you now need to decide what you want to do with them.  Your choices include: Temporarily disable the Autorun entry Permanently delete the Autorun entry Locate the running process (using Task Manager or similar) and terminating it Delete the EXE or DLL file from your disk (or at least move it to a folder where it won’t be automatically started) or all of the above, depending upon how certain you are that the program is malware. To see if your changes succeeded, you will need to reboot your machine, and check any or all of the following: Autoruns – to see if the entry has returned Task Manager (or similar) – to see if the program was started again after the reboot Check the behavior that led you to believe that your PC was infected in the first place.  If it’s no longer happening, chances are that your PC is now clean Conclusion This solution isn’t for everyone and is most likely geared to advanced users. Usually using a quality Antivirus application does the trick, but if not Autoruns is a valuable tool in your Anti-Malware kit. Keep in mind that some malware is harder to remove than others.  Sometimes you need several iterations of the steps above, with each iteration requiring you to look more carefully at each Autorun entry.  Sometimes the instant that you remove the Autorun entry, the malware that is running replaces the entry.  When this happens, we need to become more aggressive in our assassination of the malware, including terminating programs (even legitimate programs like Explorer.exe) that are infected with malware DLLs. Shortly we will be publishing an article on how to identify, locate and terminate processes that represent legitimate programs but are running infected DLLs, in order that those DLLs can be deleted from the system. Download Autoruns from SysInternals Similar Articles Productive Geek Tips Using Autoruns Tool to Track Startup Applications and Add-onsHow To Get Detailed Information About Your PCSUPERAntiSpyware Portable is the Must-Have Spyware Removal Tool You NeedQuick Tip: Windows Vista Temp Files DirectoryClear Recent Commands From the Run Dialog in Windows XP TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox) OldTvShows.org – Find episodes of Hitchcock, Soaps, Game Shows and more Download Microsoft Office Help tab

  Read the article

• PC: Quick Freeze, then BSOD, then forced reboot, then freezes again

  - by cr0z3r

  Lately I have been experiencing a weird issue. My PC will hang for a second and then BSOD - it stays there, so I have to reboot. Once Windows starts again and I'm logged in, after 1-10min it freezes again, this time without BSOD. RECAP: 1 second freeze BSOD, hangs there I have to force-reboot Once PC rebooted, I log back into Windows second freeze between a 1-10min range, no BSOD (alternatively, I get a freeze with a constant sound/noise, no BSOD) I contacted my PC provider, who told me my graphics-card might be flawed (Quadro 4000), so I used a Quadro 2000 that they lend me. The issue still occurred. The issue now seemed to belong to a flawed RAM module. Following my provider's steps, I removed all but the first from the left column and kept using my PC for a week or so without any issues. I then added the bottom-right module, and so on, until all modules were back inside - I had no problems. Now it seemed that a simple take-out-put-back-in of the RAM modules had fixed the issue. However, after a few months, the issue was back. I redid all the RAM-swapping I had done before, and concluded that the lower-right module was flawed. My provider changed it for another, and everything was great until now. My PC froze again for barely a second, hanged on a BSOD, I rebooted it, logged-in to Windows to get a freeze (without BSOD or reboot) 40 seconds later. Something worth noting, is that every time I reboot after the BSOD, it is something within Chrome that freezes my PC (e.g. this time I clicked the "restore" button as Chrome mentioned it had exited unexpectedly - from the previous freeze obviously - and it instantly froze). Finally, the Event Viewer lists 2 critical events in the past hour as "ID: 41, Type: Kernel-Power". PC-Specs: http://i.imgur.com/VZpbr.jpg Previous Dump-files: https://dl.dropbox.com/u/716600/DumpFiles_08_2012.zip I would like to thank anybody in advance for your help. You're great. UPDATE 1: I realized that I did not mention an awkward fact about this issue. After I have gotten the 1-sec freeze followed by a BSOD, after I rebooted because the BSOD hanged, and after I logged back in to get another (this time, eternal) freeze and rebooted once again, the PC does not boot back up. The power-light is on, but my monitor says "no signal", as if the PC wouldn't really be turned on. This truly seems a like a power-related issue, doesn't it? UPDATE 2: I just got a freeze, but without BSOD. My screen froze (while on Chrome, which is starting to seem suspicious to me) with an ongoing sound/noise. I had to force-reboot my PC. I would say this is a graphics-card issue, but this issue also happened when I was using the Quadro 2000 from my provider. UPDATE 3: I just got a BSOD while trying to render something (quite heavy, actually) in 3ds Max 2012. I left the BSOD "running", as it said it was writing dump files to disk. However, the percentage number stayed at 0, so after 15 minutes I force-rebooted. I then used the software WhoCrashed (thank you Dave) which reported the following from the C:\Windows\Memory.dmp file: On Thu 22.11.2012 22:13:45 GMT your computer crashed crash dump file: C:\Windows\memory.dmp uptime: 01:05:27 This was probably caused by the following module: Unknown () Bugcheck code: 0x124 (0x0, 0xFFFFFA80275AC028, 0xF200001F, 0x100B2) Error: WHEA_UNCORRECTABLE_ERROR Bug check description: This bug check indicates that a fatal hardware error has occurred. This bug check uses the error data that is provided by the Windows Hardware Error Architecture (WHEA). This is likely to be caused by a hardware problem problem. This problem might be caused by a thermal issue. A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: Unknown . Google query: Unknown WHEA_UNCORRECTABLE_ERROR

  Read the article

• I can't connect new Windows 7 PC to Mac iBook with OS 10.3.9

  - by Jeff Humm

  Help ! I have an old iBook wired to a router and a new PC linking wirelessly to same router. On the Mac I have 'seen' the PC but not been able to connect to it. On the PC, the Network and Sharing Centre lists 'IBOOK'. When I click on this, 'Windows Security' asks me to 'Enter Network Password', asking for User name and password. I have tried: 1) The user name and password of my admin account on the iBook. This returns a 'logon failure' message but lists the user name as [NAME_OF_PC\User Name], suggesting it was looking for the user name of the PC, not the Mac. 2) The user name and password of my account on the PC. This also returns a 'logon failure' message. 3) The user name of my account on the PC and the 'homegroup password' given to me by Windows when setting up the PC. This also returns a 'logon failure' message. Today I've tried connecting the two machines via a patch cable - still no joy. Can anyone help? It is 20 years since I wrestled with any OS other than Mac, and 10 years since I've done mich wrangling with the Macs, so please assume no knowledge! Thanks in advance,

  Read the article

• Need to have access to my office PC from my laptop hopping through two VPN servers

  - by Andriy Yurchuk

  Here's the illustration of what I have ( http://clip2net.com/s/2fvar ): My office PC with it's IP of 123.45.e.f. Office VPN, which I will connect to from my VPS to get to my office PC. My own VPS, which I use as a: client to connect to office VPN (through vpnc, which creates a tun0 with 123.45.c.d IP address); VPN server my laptop can connect to (OpenVPN, tun1, 10.8.0.1) My own laptop I will use as a VPN client to connect to VPS OpenVPN server (will create a tun0 with 10.8.0.2 IP address) Now what I have to do is to allow my laptop to connect to at least my office PC, but preferably to all the 123.45.x.x subnet. Please advice on how to best configure OpenVPN, routing, iptables or whatever else is needed on my VPS so that my laptop could gain access to my office PC. P.S. The reason I'm hopping through my VPS is that being connected to the office WiFi I cannot access my office PC and I cannot connect to office VPN (which is another way to access my office PC). The only way to access my PC from office WiFi I have is hopping though an outside network.

  Read the article

• Restore Your PC from Windows Home Server

  - by Mysticgeek

  If your computer crashes or you get a virus infection that makes it unrecoverable, doing a clean install can be a hassle, let alone getting your data back. If you’re backing up your computers to Windows Home Server, you can completely restore them to the last successful backup. Note: For this process to work you need to verify the PC you want to restore is connected to your network via Ethernet. If you have it connected wirelessly it won’t work. Restore a PC from Windows Home Server On the computer you want to restore, pop in the Windows Home Server Home Computer Restore disc and boot from it. If you don’t have one already made, you can easily make one following these instructions. We have also included the link to the restore disc below. Boot from the CD then select if your machine has 512MB or RAM or more. The disc will initialize… Then choose your language and keyboard settings. Hopefully if everything goes correctly, your network card will be detected and you can continue. However, if it doesn’t like in our example, click on the Show Details button. In the Detect Hardware screen click on the Install Drivers button. Now you will need to have a USB flash drive with the correct drivers on it. It has to be a flash drive or a floppy (if you happen to still have one of those) because you can’t take out the Restore CD. If you want to make sure you have the correct drivers on the USB flash drive, open the Windows Home Server Console on another computer on your network. In the Computers and Backup section right-click on the computer you want to restore and select View Backups. Select the backup you want to restore from and click the Open button in the Restore or view Files section. Now drag the entire contents of the folder named Windows Home Server Drivers for Restore to the USB flash drive. Back to the machine you’re trying to restore, insert the USB flash drive with the correct drivers and click the Scan button. Wait a few moments while the drivers are found then click Ok then Continue.   The Restore Computer Wizard starts up… Enter in your home server password and click Next. Select the computer you want to restore. If it isn’t selected by default you can pull it up from the dropdown list under Another Computer. Make certain you’re selecting the correct machine. Now select the backup you want to restore. In this example we only have one but chances are you’ll have several. If you have several backups to choose from, you might want to check out the details for them. Now you can select the disk from backup and and restore it to the destination volume. You might need to initialize a disk, change a drive letter, or other disk management tasks, if so, then click on Run Disk Manger. For example we want to change the destination drive letter to (C:).   After you’ve made all the changes to the destination disk you can continue with the restore process. If everything looks correct, confirm the restore configuration. If you need to make any changes at this point, you can still go back and make them. Now Windows Home Server will restore your drive. The amount of time it takes will vary depend on the amount of data you have to restore, network connection speed, and hardware. You are notified when the restore successfully completes. Click Finish and the PC will reboot and be restored and should be working correctly. All the updates, programs, and files will be back that were saved to the last successful backup. Anything you might have installed after that backup will be gone. If you have your computers set to backup every night, then hopefully it won’t be a big issue.   Conclusion Backing up the computers on your network to Windows Home Server is a valuable tool in your backup strategy. Sometimes you may only need to restore a couple files and we’ve covered how to restore them from backups on WHS and that works really well. If the unthinkable happens and you need to restore the entire computer, WHS makes that easy too.  Download Windows Home Server Home Computer Restore CD Similar Articles Productive Geek Tips Restore Files from Backups on Windows Home ServerCreate A Windows Home Server Home Computer Restore DiscGMedia Blog: Setting Up a Windows Home ServerShare Ubuntu Home Directories using SambaInstalling Windows Home Server TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Make your Joomla & Drupal Sites Mobile with OSMOBI Integrate Twitter and Delicious and Make Life Easier Design Your Web Pages Using the Golden Ratio Worldwide Growth of the Internet How to Find Your Mac Address Use My TextTools to Edit and Organize Text

  Read the article

• Deploying an EAR to JBOSS times out (org.rhq.core.pc.inventory.TimeoutException:)

  - by rangalo

  Hi, I am trying to deploy an ear file to JBOSS AS (defalut server). The application is the mavenised version of examples of SeamInAction book. When I copy the file to $JBOSS_HOME/server/default/deploy, I don't get any exception but the application doesn't respond, after some time trying to access the application from the browser gives following in the log... While deploying with admin-console (http://localhost:8080/admin-console) I get following error messgae: PS: After this Jboss gets into unusable state. I cannot even access admin-console. I just have to kill it. ErrorMessage in admin-console: Failed to create Resource Open18.ear - cause: org.rhq.core.pc.inventory.TimeoutException: Call to [org.rhq.plugins.jbossas5.ApplicationServerComponent.createResource()] with args [[CreateResourceReport: ResourceType=[ResourceType[id=0, category=Service, name=Enterprise Application (EAR), plugin=JBossAS5]], ResourceKey=[null]]] timed out. Invocation thread will be interrupted at org.rhq.core.pc.inventory.ResourceContainer$ResourceComponentInvocationHandler.invokeInNewThreadWithLock(ResourceContainer.java:437) at org.rhq.core.pc.inventory.ResourceContainer$ResourceComponentInvocationHandler.invoke(ResourceContainer.java:406) at $Proxy266.createResource(Unknown Source) at org.rhq.core.pc.inventory.CreateResourceRunner.call(CreateResourceRunner.java:113) at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303) at java.util.concurrent.FutureTask.run(FutureTask.java:138) at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908) at java.lang.Thread.run(Thread.java:619) Error Logs: 4:08:58,555 INFO [TableMetadata] foreign keys: [fkaf42e01ba13c3380, fk_course_ref_facility] 14:08:58,555 INFO [TableMetadata] indexes: [course_pkey] 14:08:58,645 INFO [TableMetadata] table found: public.facility 14:08:58,645 INFO [TableMetadata] columns: [zip, phone, state, type, uri, city, country, id, price_range, address, county, description, nam e] 14:08:58,645 INFO [TableMetadata] foreign keys: [] 14:08:58,645 INFO [TableMetadata] indexes: [facility_pkey] 14:08:58,705 INFO [TableMetadata] table found: public.hole 14:08:58,705 INFO [TableMetadata] columns: [id, m_par, l_handicap, name, l_par, number, course_id, m_handicap] 14:08:58,705 INFO [TableMetadata] foreign keys: [fk_hole_ref_course, fk30f4c09c3f1200] 14:08:58,705 INFO [TableMetadata] indexes: [hole_pkey, uniq_hole_number] 14:08:58,764 INFO [TableMetadata] table found: public.tee 14:08:58,764 INFO [TableMetadata] columns: [hole_id, distance, tee_set_id] 14:08:58,764 INFO [TableMetadata] foreign keys: [fk1c014f8de7677, fk_tee_ref_hole, fk1c014c69de560, fk_tee_ref_tee_set] 14:08:58,764 INFO [TableMetadata] indexes: [tee_pkey] 14:08:58,826 INFO [TableMetadata] table found: public.tee_set 14:08:58,826 INFO [TableMetadata] columns: [id, color, m_slope_rating, l_slope_rating, name, course_id, m_course_rating, l_course_rating, p os] 14:08:58,826 INFO [TableMetadata] foreign keys: [fk_tee_set_ref_course, fkaa6881b79c3f1200] 14:08:58,826 INFO [TableMetadata] indexes: [tee_set_pkey, uniq_tee_set_pos, uniq_tee_set_color] 14:08:58,827 INFO [SchemaUpdate] schema update complete 14:08:58,829 INFO [NamingHelper] JNDI InitialContext properties:{java.naming.factory.initial=org.jnp.interfaces.NamingContextFactory, java. naming.factory.url.pkgs=org.jboss.naming:org.jnp.interfaces} 14:08:58,850 INFO [TomcatDeployment] deploy, ctxPath=/Open18 14:15:53,969 WARN [DiscoveryComponentProxyFactory] The discovery component for resource type [ResourceType[id=0, category=Service, name=Connector, plugin=JBossAS5]] has been blacklisted 14:15:53,970 WARN [InventoryManager] Failure during discovery for [Connector] Resources - failed after 300002 ms. org.rhq.core.pc.inventory.TimeoutException: Call to [org.rhq.plugins.jbossas5.ConnectorDiscoveryComponent.discoverResources()] with args [[org.rhq.core.pluginapi.inventory.ResourceDiscoveryContext@96db1]] timed out. Invocation thread will be interrupted at org.rhq.core.pc.util.DiscoveryComponentProxyFactory$ResourceDiscoveryComponentInvocationHandler.invokeInNewThread(DiscoveryComponentProxyFactory.java:208) at org.rhq.core.pc.util.DiscoveryComponentProxyFactory$ResourceDiscoveryComponentInvocationHandler.invoke(DiscoveryComponentProxyFactory.java:181) at $Proxy249.discoverResources(Unknown Source) at org.rhq.core.pc.inventory.InventoryManager.invokeDiscoveryComponent(InventoryManager.java:272) at org.rhq.core.pc.inventory.InventoryManager.executeComponentDiscovery(InventoryManager.java:1697) at org.rhq.core.pc.inventory.RuntimeDiscoveryExecutor.discoverForResource(RuntimeDiscoveryExecutor.java:218) at org.rhq.core.pc.inventory.RuntimeDiscoveryExecutor.discoverForResource(RuntimeDiscoveryExecutor.java:234) at org.rhq.core.pc.inventory.RuntimeDiscoveryExecutor.runtimeDiscover(RuntimeDiscoveryExecutor.java:134) at org.rhq.core.pc.inventory.RuntimeDiscoveryExecutor.call(RuntimeDiscoveryExecutor.java:94) at org.rhq.core.pc.inventory.RuntimeDiscoveryExecutor.call(RuntimeDiscoveryExecutor.java:51) at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303) at java.util.concurrent.FutureTask.run(FutureTask.java:138) at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$301(ScheduledThreadPoolExecutor.java:98) at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:207) at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908) at java.lang.Thread.run(Thread.java:619) 14:15:53,981 WARN [NavigationContent] Unable to find node for deleted resource [Resource[id=-5, type=Connector, key=ajp://127.0.0.1:8009, name=ajp://127.0.0.1:8009, parent=JBoss Web]].

  Read the article

• MonoGame: PC + Mobile?

  - by ashes999

  I'm researching Monogame. Their goal is to allow "easy" porting of an existing XNA/Windows game to mobile. Does this mean you can have one solution (theoretically) with shared code, and it works on all three platforms (PC, Android, iPhone)? Or do you need to port your game from PC to Android, and then again to iPhone? I'm sure "write once, run anywhere" works 80% of the time, I'm not worried about that other 20% like support for GPS, acceleratometer, etc. which doesn't exist on all platforms.

  Read the article

• Keep Malware Off Your PC With Sandboxie

  Malware can infect your PC from anywhere on the Web. Sandboxie, a free application, blocks it.

  Read the article

• Ubuntu 10.10 Netbook Remix on Asus Eee PC 701 4G - boot process hangs up

  - by Andrew

  I've got an old Eee PC 701 4G with the following specifications: 512 MB RAM 4GB SSD drive SM223AC 8GB SD card extension Screen resolution: 800 x 480 BIOS Revision 1101 (05/16/2008) EC Firmware version: EPC-079 Windows XP SP3 works fine on it, but I decided to switch my OS to Ubuntu. I have downloaded an Ubuntu 10.10 Netbook Remix ISO and wrote it to my FAT32 SD card using Universal-USB-Installer-1.8.3.3, as described on ubuntu.com During standard load from the SD card the boot process hangs up with black screen. If I'll press F6 while preloading Ubuntu, it sucessfully displays the boot menu, selecting language and showing 2 main commands: "Run ubuntu from USB drive" and "Insall Ubuntu". Selecting either of these commands leading to the same result - after some background work the main loading indicator is displayed ("Ubuntu" text with dotted progress bar under it), and it's progressing forever without any effect. Is Ubuntu 10.10 compatible with my Eee PC at all? How to boot it correctly?

  Read the article

• Eee PC brighness contol with 12.04 release

  - by Terry

  is there a solution to the low screen brightness issue with the Eee PC and release 12.04? When I use the brightness control, the screen goes through three adjustment cycles of dark to semi bright, but never gets to bright. As you index the control up, brightness increases, then suddenly cuts back to dark. use the brightness button to further increase the brightness and the same cycle happens. As though there are three distinct brightness events, each one setting back to low level. Under no circumstances other than initial boot up can you get to a bright screen. I just finished installing 12.04 on two Acer (Gateway netbooks) with no brightness issue. Just on the Eee PC

  Read the article

• RIP PC

  <b>Computerworld:</b> "Apple is on top, and the time of the PC is ended"

  Read the article

• Automatically Install Multiple CAB Files to a Windows Mobile/Pocket PC Device

  A solution that uses threading and ActiveSync to automate the process of installing multiple CAB files to a Windows Mobile or Pocket PC device

  Read the article

• Standby Problem, PC can not enter Standby mode

  - by Leon95

  I have a problem with the Standby function: My Computer does not enter the Standby mode with Ubuntu 14.04LTS. If I remeber me right it, works with Ubuntu 13.10 but this Version was not long installed on this PC. Now when i press Standby in the menu or on my Keyboard the Display turns black for a few seconds, then some messages appear for a very short moment on the screen. After that, the the log-in screen appear. Two times I was able to enter Standby but the other times it fails. Tecnical Data about my PC: Ubuntu 14.04 with all Updates main storage: 3,8GiBprocessor: Intel® Core™ i3-2330M CPU @ 2.20GHz × 4 graphic: Intel® Sandybridge Mobile graphic board: NVIDA GEFORCE GT 555M CUDA 1GB Dual Boot System with win7 x64Bit Medion P6812 Laptop Here is the message output: Usally I got only a half of the screen filled with messages like that. When I filmed it it was much more. I dont know, maybe this is a Bug.

  Read the article

• How to Play Classic Arcade Games On Your PC

  - by Jason Fitzpatrick

  New games with their fancy textures, 3D modeling, and immersive environments have their charm, sure, but what if you crave some old-school arcade gaming? Read on to see how you can turn your computer into an virtual arcade cabinet. Vintage games ran on hardware significantly less powerful than that found in modern desktop computers. With the right software, a joystick or two (if you want to make experience feel more authentic), and a little digging online to find your favorite games, it’s easy to play the arcade hits of your childhood. How to Play Classic Arcade Games On Your PC How to Use an Xbox 360 Controller On Your Windows PC Download the Official How-To Geek Trivia App for Windows 8

  Read the article

• Creating a Strong Bridge to the Post PC World

  - by Webgui

  Moving from location to location requires strong roads.  When crossing a barrier though, like a body of water or valley, we are required to build a strong bridge to get us from point A to point B in a way that is fast, safe, and easy.Yet we are not talking here about driving a car or riding a bus.  As we in the computing world are evidencing the move to the post-PC era, modernizing and migrating legacy applications to harness the power of HTML5 web, cloud and mobile is one of the most difficult challenges enterprises have faced.  Constant technological changes have weakened the business value of legacy systems, which have been developed over the years through huge investments.  There are several risks of course in this move.  Do you choose to simply rewrite code of legacy apps and transform them to HTML5 one by one?  This is quite expensive (according to research firm Gartner, the cost is $6 - $26 per line of code).  Of course, the pace of the rewriting process is very slow – around 170 lines per day for each developer – which slows down business productivity in a world in which no organization can afford to fall behind.  Other questions include whether the new cloud-based apps will have the same functionality as the trusted applications that worked for you for years.  How will the user experience be affected?  And of course, what about data security?  So we are faced with the challenge of building a sturdy bridge to stabilize our move in order to allow us to confidently and easily move our legacy applications into the post-PC era.   We at Gizmox are excited to release the first downloadable Community Technology Preview (CTP) of our Instant CloudMove Transposition Studio.Developers: To download the tool, and try it out for yourself, please visit http://www.visualwebgui.com/download.aspx.The CTP is the first and only tool-based solution allowing any Microsoft Visual Studio developer to extend VB6 and .NET enterprise client/server applications into HTML5 web, cloud and mobile applications, including the ability to upgrade their code and UI while doing so.   It is the only solution to fully replicate enterprise desktop applications behavior in the post-PC era.  With Instant CloudMove, the transposed application is available on any mobile or tablet device, browser and across any client operating system. Moreover, the extended application logic and data remains on the server behind the fire-wall and therefore the application’s front end is secured-by-design.   We would love for you to try out the tool for yourselves and let us know what you think.  How are you finding the move?

  Read the article

• Asus Eee PC 701 4G hangs on boot

  - by Andrew

  I've got an old Eee PC 701 4G with the following specifications: 512 MB RAM 4GB SSD drive SM223AC 8GB SD card extension Screen resolution: 800 x 480 BIOS Revision 1101 (05/16/2008) EC Firmware version: EPC-079 Windows XP SP3 works fine on it, but I decided to switch my OS to Ubuntu. I have downloaded an Ubuntu 10.10 Netbook Remix ISO and wrote it to my FAT32 SD card using Universal-USB-Installer-1.8.3.3, as described on ubuntu.com During standard load from the SD card the boot process hangs up with black screen. If I'll press F6 while preloading Ubuntu, it sucessfully displays the boot menu, selecting language and showing 2 main commands: "Run ubuntu from USB drive" and "Install Ubuntu". Selecting either of these commands leading to the same result - after some background work the main loading indicator is displayed ("Ubuntu" text with dotted progress bar under it), and it's progressing forever without any effect. Is Ubuntu 10.10 compatible with my Eee PC at all? How to boot it correctly?

  Read the article

• XBMC freezes pc after viewing movies

  - by Eric

  Tough to replicate, but basically after watching any movie in my library on XBMC, it'll randomly start freezing my pc. All I can do is either force shutdown by holding down the power button or wait for it to shut itself down. It's not any particular movie, it's not any particular amount of time watching one. It only happens while using XBMC. PC is older, I know the hardware is outdated, but it's not overheating nor is a simple movie too much for it to play, at least I don't think it is. Specs: Intel Core 2 6400. nVidia Quardro FX 560 4GB RAM So any suggestions? I don't have any bug/error reports because it doesn't print out any. I'm trying to find a program like XBMC, as I like having my movies organized and not have to hunt through folders to find them, so any suggestions there?

  Read the article

• In dual boot PC, the boot/GRUB menu suddenly disappeared (Ubuntu option is not appearing anymore)

  - by iammilind

  I have been using Ubuntu 13.04 as my primary OS for quite sometime on Sony VAIO laptop with other OS being windows 8 (never use it). Till today, everything was fine. In the evening I had shut down my PC and closed the lid; Typically I do this when the shutting down screen is still on. But probably this time it was fatal. When I again restarted my PC, now no menu is appearing for selecting OS and it directly goes for Windows 8. My question is similar to this thread, but I don't have Ubuntu CD as I had installed using pen drive sometime back. Is there any (genuine or workaround) easier way to get back the GRUB menu back in the place? Note that keyboard shortcuts in Sony VAIO is different, here I have an "Assist" menu as well to get those internal options.

  Read the article

• Chrome : Roi, juste pour un jour, sur PC et un dimanche d'après StatCounter

  Chrome : Roi, juste pour un jour Sur PC et un dimanche d'après StatCounter Le chiffre est symbolique et l'on ne sait pas trop s'il ne restera pas plus comme un coup de publicité pour StatCounter que comme autre chose. Mais il n'en reste pas moins que pendant une journée, sur le segment des PC de bureau, Chrome a été le navigateur numéro 1 dans le monde. [IMG]http://ftp-developpez.com/gordon-fowler/StatCounter%2018%20Mars/Globalsmall.png[/IMG] Le 18 mars donc, le navigateur de Google a été plus utilisé qu'Internet Explorer. On remarquera que le 18 était un dimanche et que l'utili...

  Read the article

• How to create a use case diagram for board game played on PC

  - by user970696

  I'm struggling with a task as I was given to practice UML and use cases. The problem is that I should model computer version of a board game so I am unsure about a few things. obviously it does not matter if you play against the PC or another player, the actions are the same. The game is simply like tic tac toe. E.g. Actor Player ---(Place a diamond)-----include----(Check for a row)---include--(Swap players) But the game is played on the PC, so is Check for row really a use case? And the same with Swap players? Because the system would do that. On the other hand, if it was not, how could I continue?

  Read the article

• PC noisy due to high load - why?

  - by Jinx

  I just installed an ubuntu on my pc(Dell Inspiration I560SR-358, with CPU E5700 3GHz, 4G memory, and NVIDIA GeForce G310). The pc becomes noisy before that it's quiet with a windows 7 on it. How come? How to set it to be quiet again in unbuntu 10.04. One of the two cpu usage is always 100%. I think that is the reason. //re-edit Everything gets ok after I restart the computer.But the fan is still running which makes it noisy, if i switch to windows 7, it becomes quiet again.

  Read the article

• How to Install Linux on my PC

  - by Holic

  Hi i need some help to install the drivers from my pc, on Ubuntu 10.10 i just installed it, and i a newbie on Ubuntu, but i understand a bit of Windows...but i want to try ubuntu and then Maybe change to UBUNTU!!! My hardware: QuadCore Intel Core i7-870, 3266 MHz (24 x 136) Asus P7P55D-E (2 PCI, 3 PCI-E x1, 2 PCI-E x16, 4 DDR3 DIMM, Audio, Gigabit LAN, IEEE-1394) NVIDIA GeForce GTX 480 (1536 MB) nVIDIA HDMI @ nVIDIA GF100 - High Definition Audio Controller VIA VT1828S @ Intel Ibex Peak PCH - High Definition Audio Controller [B-3] DIMM1: G Skill F3-12800CL9-2GBRL 2 GB DDR3-1333 DDR3 SDRAM (8-8-8-22 @ 609 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz) DIMM3: G Skill F3-12800CL9-2GBRL 2 GB DDR3-1333 DDR3 SDRAM (8-8-8-22 @ 609 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz) my pc is not connected to the internet with a wire(RJ45) but with a wireless LAn Asus WL-167G-V3(wich i also whant to install if possible) Anything would've help me :) Cheers & Thank you!

  Read the article

< Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >