Search Results

Search found 404 results on 17 pages for 'tie'.

Page 10/17 | < Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >

• Big-name School for Undergrad Students

  - by itaiferber

  As a soon-to-be graduating high school senior in the U.S., I'm going to be facing a tough decision in a few months: which college should I go to? Will it be worth it to go to Cornell or Stanford or Carnegie Mellon (assuming I get in, of course) to get a big-name computer science degree, internships, and connections with professors, while taking on massive debt; or am I better off going to SUNY Binghamton (probably the best state school in New York) and still get a pretty decent education while saving myself from over a hundred-thousand dollars worth of debt? Yes, I know questions like this has been asked before (namely here and here), but please bear with me because I haven't found an answer that fits my particular situation. I've read the two linked questions above in depth, but they haven't answered what I want to know: Yes, I understand that going to a big-name college can potentially get me connected with some wonderful professors and leaders in the field, but on average, how does that translate financially? I mean, will good connections pay off so well that I'd be easily getting rid of over a hundred-thousand dollars of debt? And how does the fact that I can get a fifth-years master's degree at Carnegie Mellon play into the equation? Will the higher degree right off the bat help me get a better-paying job just out of college, or will the extra year only put me further into debt? Not having to go to graduate school to get a comparable degree will, of course, be a great financial relief, but will getting it so early give it any greater worth? And if I go to SUNY Binghamton, which is far lesser-known than what I've considered (although if there are any alumni out there who want to share their experience, I would greatly appreciate it), would I be closing off doors that would potentially offset my short-term economic gain with long-term benefits? Essentially, is the short-term benefit overweighed by a potential long-term loss? The answers to these questions all tie in to my final college decision (again, permitting I make it to these schools), so I hope that asking the skilled and knowledgeable people of the field will help me make the right choice (if there is such a thing). Also, please note: I'm in a rather peculiar situation where I can't pay for college without taking out a bunch of loans, but will be getting little to no financial aid (likely federal or otherwise). I don't want to elaborate on this too much (so take it at face value), but this is mainly the reason I'm asking the question. Thanks a lot! It means a lot to me.

  Read the article

• Do I need to go to a big-name university?

  - by itaiferber

  As a soon-to-be graduating high school senior in the U.S., I'm going to be facing a tough decision in a few months: which college should I go to? Will it be worth it to go to Cornell or Stanford or Carnegie Mellon (assuming I get in, of course) to get a big-name computer science degree, internships, and connections with professors, while taking on massive debt; or am I better off going to SUNY Binghamton (probably the best state school in New York) and still get a pretty decent education while saving myself from over a hundred-thousand dollars worth of debt? Yes, I know questions like this has been asked before (namely here and here), but please bear with me because I haven't found an answer that fits my particular situation. I've read the two linked questions above in depth, but they haven't answered what I want to know: Yes, I understand that going to a big-name college can potentially get me connected with some wonderful professors and leaders in the field, but on average, how does that translate financially? I mean, will good connections pay off so well that I'd be easily getting rid of over a hundred-thousand dollars of debt? And how does the fact that I can get a fifth-years master's degree at Carnegie Mellon play into the equation? Will the higher degree right off the bat help me get a better-paying job just out of college, or will the extra year only put me further into debt? Not having to go to graduate school to get a comparable degree will, of course, be a great financial relief, but will getting it so early give it any greater worth? And if I go to SUNY Binghamton, which is far lesser-known than what I've considered (although if there are any alumni out there who want to share their experience, I would greatly appreciate it), would I be closing off doors that would potentially offset my short-term economic gain with long-term benefits? Essentially, is the short-term benefit overweighed by a potential long-term loss? The answers to these questions all tie in to my final college decision (again, permitting I make it to these schools), so I hope that asking the skilled and knowledgeable people of the field will help me make the right choice (if there is such a thing). Also, please note: I'm in a rather peculiar situation where I can't pay for college without taking out a bunch of loans, but will be getting little to no financial aid (likely federal or otherwise). I don't want to elaborate on this too much (so take it at face value), but this is mainly the reason I'm asking the question. Thanks a lot! It means a lot to me.

  Read the article

• How to explain bad software to non-technical people?

  - by mtutty

  In discussing software development with non-technical people (customers, business owners, project sponsors, etc.), I often resort to analogies and metaphors. It's relatively easy and effective to use a "house" or other metaphor for describing the size and complexity of new development. However, we often inherit someone else's code or data, and this approach doesn't seem to hold up as well when trying to explain why we're gutting something that already seems to work. Of course we can point to cycle time and cost to be saved in the future but this generally means nothing to business folks. I know doctors can say "just take this pill," but I'm not sure that software devs have the same authority. Ideas? EDIT: Let me add a bit to the discussion. The specific project I'm talking about has customers that don't realize (or care) about specific aspects of the system we're retiring (i.e., they think it was just fine): The system would save a NEW RECORD every time someone updated a field The system contained tables for reference data. These tables had new records added every day, even though they were duplicates of previous records. And there was no way to tie the reference data used for a particular case at the time it was closed. This is like 99% of the data in the old system. The field NAMES also have spaces, apostrophes and other inappropriate characters in them, making everything harder to work with. In addition to the incredible amount of duplicate data, they have around 1000 XLS files with data they want added to the system. Previously, they would do a spreadsheet for each case in the database, IN ADDITION TO what they typed into the database. Getting rid of this old, unneeded information and piping in the XLS data comprises about 80% of the total project effort, and was not something we could accurately predict. I'm trying to find a concrete way to describe how bad this thing was, mostly so that the customer will understand why the migration process has been so time-consuming. The actual coding was done pretty quickly and the new system works fine, but without the old data they won't be happy. Sorry to get into the weeds, but most of the answers I've seen so far are pretty basic scope/schedule/cost things. I've been doing this for 15 years, so this really is more of a reflective, philosophical question - but without some of the details it can be difficult to really appreciate the awful beauty of this problem.

  Read the article

• Fast Data Executive Round Table FY14 event kit

  - by JuergenKress

  We are very interested to run joint marketing events jointly with you as our partners! At our SOA Community Workspace (SOA Community membership required) you can find a new Fast Data Executive Round Table FY14 event kit. This event is designed at senior IT and executives level for the purposes of education, awareness, and thought leadership around the subject of big data; and a specific flavor of big data - Fast Data - that has begun to spark the imagination of many Oracle customers. Fast Data is not new. It’s a term that was invented initially by Ovum’s Tony Baer as a way to represent the collection of ‘high velocity’ solutions with respect to the big data. For Oracle, the Fast Data campaign in FY13 began as a way to tie a broader set of solutions together (SOA/Business Process Management, Data Integration and Business Analytics) under a set of use cases focused on real-time, high velocity data. It has helped to give Oracle a leap-frog advantage over many of the niche integration vendors (i.e. Informatica, Pega, Tibco, Software AG, Terracotta) who haven’t been able to address these types of end-to-end use cases which rely on the combination of filtering, in-memory data processing, correlation, real-time data movement and transformation, end-to-end analytics, and business process management. Only Oracle can address all the dimensions of fast data, and only Oracle can provide a set of engineered solutions to address this space. This event is designed to continue that thought leadership momentum and raise the awareness about what Oracle Fast Data solutions are designed to solve. It’s designed to highlight real customer solutions and articulate the business benefits that fast data can address. This is not an event that gets into the esoteric technical standards of Hadoop, NoSQL, and in-memory data grids. This is an event that instead gets into the heart of business problems that big data has left un-addressed and charts the path for next steps in fast data. Get the Fast Data Executive Round Table FY14 event kit here. Support marketing campaigns We can support such events by: Oracle speakers - contact your partner manager Marketing budget - contact your A&C marketing manager Event location - free use of Oracle Customer Visitor Centers conference rooms Promote your event at events.oracle.com: http://tinyurl.com/eventspecialized E-Blast: invite customers to your event – contact your A&C marketing manager For additional marketing kits e.g for Business Process Managementplease visit our SOA Community Workspace. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Mix Forum Technorati Tags:

  Read the article

• Designing Snake AI

  - by Ronald

  I'm new to this gamedev stackechange but have used the math and cs sites before. So, I'm in a competition to create AI for a snake that will compete with 3 other snakes in 5 minute rounds where the rules are much like the traditional Nokia snake game except that there are 4 snakes, the board is 50x50 and there are a number of small obstacles on the field. Like the Nokia game, your snake grows when you get to the fruit and if you crash into yourself, another snake or the wall you die. The game runs with a 50ms delay between moves and the server sends the new game state every 50ms which the code must analyze and what not and output the next move. The winner is the snake who had the longest length at any point in the game. Tie breakers are decided by kills. So far what I have done is implemented an A* graph search from each snake to determine if my snake is the closest to the apple and if it is, it goes for the apple. Otherwise, I made a neat little algorithm to determine the emptiest area of the board, which my snake goes for, to anticipate the next apple. Other than this I have some small survivability checks to ensure my snake isn't walking into a trap that it can't get out and if it does get stuck, I have something to give it a better chance of getting out. ... Anyway, I've tested my snake on a test server and it does quite well. Generally, my strategy of only going for the apple when its a sure thing and finding space when its not makes it grow faster than any other snakes (some snakes do a similar thing but often just go to the middle or a corner) sometimes it wins these trial games but is more often than not beaten by the same snake who seems to have the edge on survivability(my snake grows quicker but then dies somehow and this other snake just plods slowly along and wins on consistency. So I was wondering about any ideas anyone has to try and improve my snake. Or maybe ideas at a new approach to take. My functions and classes are good so changes that might seem drastic shouldn't be too bad. I encourage all ideas. Any thoughts ??

  Read the article

• How can I cleanly and elegantly handle data and dependancies between classes

  - by Neophyte

  I'm working on 2d topdown game in SFML 2, and need to find an elegant way in which everything will work and fit together. Allow me to explain. I have a number of classes that inherit from an abstract base that provides a draw method and an update method to all the classes. In the game loop, I call update and then draw on each class, I imagine this is a pretty common approach. I have classes for tiles, collisions, the player and a resource manager that contains all the tiles/images/textures. Due to the way input works in SFML I decided to have each class handle input (if required) in its update call. Up until now I have been passing in dependencies as needed, for example, in the player class when a movement key is pressed, I call a method on the collision class to check if the position the player wants to move to will be a collision, and only move the player if there is no collision. This works fine for the most part, but I believe it can be done better, I'm just not sure how. I now have more complex things I need to implement, eg: a player is able to walk up to an object on the ground, press a key to pick it up/loot it and it will then show up in inventory. This means that a few things need to happen: Check if the player is in range of a lootable item on keypress, else do not proceed. Find the item. Update the sprite texture on the item from its default texture to a "looted" texture. Update the collision for the item: it might have changed shape or been removed completely. Inventory needs to be updated with the added item. How do I make everything communicate? With my current system I will end up with my classes going out of scope, and method calls to each other all over the place. I could tie up all the classes in one big manager and give each one a reference to the parent manager class, but this seems only slightly better. Any help/advice would be greatly appreciated! If anything is unclear, I'm happy to expand on things.

  Read the article

• Building a Store Locator ASP.NET Application Using Google Maps API

  The past couple of projects I've been working on have included the use of the Google Maps API and geocoding service in websites for various reasons. I decided to tie together some of the lessons learned, build an ASP.NETstore locator demo, and write about it on 4Guys. Last week I published the first article in what I think will be a three-part series: Building a Store Locator ASP.NET Application Using Google Maps (Part 1). Part 1 walks through creating a demo where a user can type in an address and any stores within a (roughly) 15 mile area will be displayed in a grid.The article begins with a look at the database used to power the store locator (namely, a single table that contains one row for every location, with each location storing its store number, address, and, most important, latitude and longitude coordinates) and then turns to usingGoogle's geocoding service to translatea user-entered address into latitude and longitude coordinates. The latitude and longitude coordinates are used to find nearby stores, which are then displayed in a grid. Part 2 looks at enhancing the search results to include a map with markers indicating the position of each nearby store location. The Google Maps API, along with a bit of client-side script and server-side logic, make this actually pretty straightforward and easy to implement. Here's a screen shot of the improved store locator results. Part 3, which I plan on publishing next week, looks at how to enhance the map by using information windows to display address information when clicking a marker. Additionally, I'll show how to use custom icons for the markers so that instead of having the same marker for each nearby location the markers will be images numbered 1, 2, 3, and so on, which will correspond to a number assigned to each search result in the grid. The idea here is that by numbering the search results in the grid and the markers on the map visitors will quickly be able to see what marker corresponds to what search result. This article and demo has been a lot of fun to write and create, and I hope you enjoy reading it, too. Building a Store Locator ASP.NET Application Using Google Maps API (Part 1) Building a Store Locator ASP.NET Application Using Google Maps API (Part 2) Happy Programming!Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• How do I keep user input and rendering independent of the implementation environment?

  - by alex

  I'm writing a Tetris clone in JavaScript. I have a fair amount of experience in programming in general, but am rather new to game development. I want to separate the core game code from the code that would tie it to one environment, such as the browser. My quick thoughts led me to having the rendering and input functions external to my main game object. I could pass the current game state to the rendering method, which could render using canvas, elements, text, etc. I could also map input to certain game input events, such as move piece left, rotate piece clockwise, etc. I am having trouble designing how this should be implemented in my object. Should I pass references to functions that the main object will use to render and process user input? For example... var TetrisClone = function(renderer, inputUpdate) { this.renderer = renderer || function() {}; this.inputUpdate = input || function() {}; this.state = {}; }; TetrisClone.prototype = { update: function() { // Get user input via function passed to constructor. var inputEvents = this.inputUpdate(); // Update game state. // Render the current game state via function passed to constructor. this.renderer(this.state); } }; var renderer = function(state) { // Render blocks to browser page. } var inputEvents = {}; var charCodesToEvents = { 37: "move-piece-left" /* ... */ }; document.addEventListener("keypress", function(event) { inputEvents[event.which] = true; }); var inputUpdate = function() { var translatedEvents = [], event, translatedEvent; for (event in inputEvents) { if (inputEvents.hasOwnProperty(event)) { translatedEvent = charCodesToEvents[event]; translatedEvents.push(translatedEvent); } } inputEvents = {}; return translatedEvents; } var game = new TetrisClone(renderer, inputUpdate); Is this a good game design? How would you modify this to suit best practice in regard to making a game as platform/input independent as possible?

  Read the article

• What's a good way to get an IT internship? [closed]

  - by user1419715

  I'm a second year CS student who's worked really hard to build and expand my skills. I've spent the past week now trying to find a place to volunteer (i.e. work for FREE) so I can get a little bit of in-the-door experience with web development. I have a portfolio with several decent projects, a handful of languages and other hard/soft skills that employers constantly say they're clamoring for. I can't even get people to take my calls. This is me offering to work for them for FREE, remember. I'm in a reputable program at a respected school, get decent grades and...yeah, I've worked really hard to be presentable. On the rare occassions I actually get to speak to somebody at a design firm they hedge and do everything they can to get me off the phone. Nobody's ever expressed even the slightest interest in taking me on. The answer to the experience problem is supposed to be "you need to spend a year or two building up a big portfolio of projects on your own" so that employers will be impressed. I've done that. Websites, standalone apps, etc.. Nobody will even look at my resume, though. Question: Why does there seem to be so little interest in taking on upaid interns in the world of IT? Update: Sorry you all think I'm too aggressive or angry. It wasn't my intent to be a jerk to people while asking them for their opinions. That said, how would you feel if employer after employer turned you down cold when you offered yourself to them without asking for remuneration? One can't even get an unpaid job in this economy now, it seems. How am I going about my search? I find web firms in my area and contact them via email with a brief sales pitch of myself and a resume attached. Then a couple of days later I follow up with a phone contact. Nobody--anywhere--is advertising for interns of any kind. If there were I'm sure there'd be about 500 resumes per position, even unpaid. I've had good experiences in the past with cold-calling firms for actual paid jobs in other industries (hiring is a pain in the ass process and a call like this can show initiative while reducing a busy employer's need to do all the hiring overhead work), so I thought volunteering would work at least as well. My skills are pretty good for a CS student and include the usual suspects: HTML/CSS/Javascript, Python, Java, C, C#/.Net etc etc. I made a point on my resume to tie each ability claim to a project as well. Oh, and regarding the "working for free still costs the employer money" argument: that's an excellent point I hadn't though of. But it means...what? I have to pay the employer for the privilege of working there now?

  Read the article

• "Modern" Ethernet over coax

  - by Electrons_Ahoy

  So, I've just bought a house. It's reasonably new - built in the early '00s. One of the features that got built in was a cable TV drop in every room. The cabling is gorgeous - there's even a wiring cabinet of sorts in a closet where the cables all tie together to the splitter to the outside line. Of course, my problem is that I only own the one TV. I do, however, own a few computers. What I would love to be able to do is drop a switch in the wiring closet and run 100/1000BASE-T ethernet over the coax in the walls I wouldn't otherwise be using. My fantasy would be if you could get some kind of adapter-plug-thing that would take a coax plug on one side and a cat5/RJ45 plug on the other. Had anyone else done this? Any suggestions? (There are a few other options that suggest themselves - first, I could just use the existing cabling channels and re-run cat5 or 6 through the walls. While tempting, that sounds like more work than I really want to put in, so I'm calling that Plan B. Also, I could just scare up a mess of old 10BASE2 cards and run the house on thinnet, all mid-90s style. While I think I'd get major style points for that, I don't think I can get a 10BASE2 adapter for the new laptop. Also, I have all these super-snazzy gigabit adaptors I'd like to be using. And so forth.)

  Read the article

• How quickly toggle smart quotes in Word 2010?

  - by KnowItAllWannabe

  I'm working on a long technical document that contains numerous displays of computer code. In running text, I want my quotation marks to be curly, which means that Word's "smart quotes" autoformatting-as-I-type feature is one I want on. But in code displays, curly quotes are incorrect, so in these cases, I want smart-quotes-as-I-type disabled. Is there a fast way to toggle this setting? Or is there a way I can tie it to the paragraph style I'm in? (I use a distinct style for code displays.) Currently, to toggle the setting, I have to click FileOptionsProofingAutoCorrect Options..."Straight quotes" with "smart quotes"OKOK, which is seven mouse clicks. Toggling it back is another seven mouse clicks. Isn't there a faster way? A keyhboard shortcut to do the toggling or a toolbar button that would toggle it with a single click would be great. Having the setting depend on the paragraph style I was in would be even better.

  Read the article

• Issue with SSL using HAProxy and Nginx

  - by Ben Chiappetta

  I'm building a highly available site using a multiple HAProxy load balancers, Nginx web serves, and MySQL servers. The site needs to be able to survive load balancer or web servers nodes going offline without any interruption of service to visitors. Currently, I have two boxes running HAProxy sharing a virtual IP using keepalived, which forward to two web servers running Nginx, which then tie into two MySQL boxes using MySQL replication and sharing a virtual IP using heartbeat. Everything is working correctly except for SSL traffic over HAProxy. I'm running version 1.5 dev12 with openssl support compiled in. When I try to navigate to the virtual IP for haproxy over https, I get the message: The plain HTTP request was sent to HTTPS port. Here's my haproxy.cfg so far, which was mainly assembled from other posts: global log 127.0.0.1 local0 log 127.0.0.1 local1 notice # log 127.0.0.1 local0 user haproxy group haproxy daemon maxconn 20000 defaults log global option dontlognull balance leastconn clitimeout 60000 srvtimeout 60000 contimeout 5000 retries 3 option redispatch listen front bind :80 bind :443 ssl crt /etc/pki/tls/certs/cert.pem mode http option http-server-close option forwardfor reqadd X-Forwarded-Proto:\ https if { is_ssl } reqadd X-Proto:\ SSL if { is_ssl } server web01 192.168.25.34 check inter 1s server web02 192.168.25.32 check inter 1s stats enable stats uri /stats stats realm HAProxy\ Statistics stats auth admin:********* Any idea why SSL traffic isn't being passed correctly? Also, any other changes you would recommend? I still need to configure logging, so don't worry about that section. Thanks in advance your help.

  Read the article

• Cable management techniques

  - by cornjuliox

  How do you manage the giant jungle of cables behind your PC? When you have 2 or more PCs next to each other, you wind up with this giant mess cables that's a pain in the neck to clean especially when both computers are running 24/7 and any fidgeting with the cables is likely to cause data loss and/or angry users. So far I've tried masking tape, cable ties and plain old string but none have been very effective. The masking tape kept the cables in place, but over time they ended up leaving this awful sticky residue on the sides of the cables that just won't come off gets all over your fingers and is horrible horrible horrible. I have nightmares about that stuff. We used cable ties and 'folded' up some of the longer cables so that they weren't any longer than they needed to be, but this meant that the position of some of our devices like the keyboard and the mouse were essentially 'fixed' until we removed the ties. The string didn't work much differently and required that we tie them properly or risk it coming loose. I would switch to a wireless keyboard and mouse, but I don't want to have to deal with the added expense of batteries, even the rechargable ones. Plus I don't want them to die on me at a crucial moment (happened to me once while playing Firearms _<). How do large offices and data centers manage their masses of cable?

  Read the article

• Cable management techniques

  - by cornjuliox

  How do you manage the giant jungle of cables behind your PC? When you have 2 or more PCs next to each other, you wind up with this giant mess cables that's a pain in the neck to clean especially when both computers are running 24/7 and any fidgeting with the cables is likely to cause data loss and/or angry users. So far I've tried masking tape, cable ties and plain old string but none have been very effective. The masking tape kept the cables in place, but over time they ended up leaving this awful sticky residue on the sides of the cables that just won't come off gets all over your fingers and is horrible horrible horrible. I have nightmares about that stuff. We used cable ties and 'folded' up some of the longer cables so that they weren't any longer than they needed to be, but this meant that the position of some of our devices like the keyboard and the mouse were essentially 'fixed' until we removed the ties. The string didn't work much differently and required that we tie them properly or risk it coming loose. I would switch to a wireless keyboard and mouse, but I don't want to have to deal with the added expense of batteries, even the rechargable ones. Plus I don't want them to die on me at a crucial moment (happened to me once while playing Firearms _<). I know that there are people out there with home/office networks a thousand times more convoluted than mine, so

  Read the article

• What is the IPv6 equivalent to IPv4 RFC1918 addresses?

  - by Kumba

  Having a hard time wrapping my head around IPv6 here. A lot of the lingo seems targeted at enterprise-level IPv6 deployments, discussing link-local, site-local, global unicast, scopes, etc. Not a lot of solid information on really small networks, like home networks. I want to check my thinking and make sure I am getting the correct translations from IPv4-speak to IPv6-speak. The first question is, what's the equivalent of RFC1918 for IPv6? Initial searches suggested there was no equivalent. Then I stumbled upon Unique Local Addresses (RFC4193), and that states that all ULA's should be assigned the prefix fc00, followed by a 40-bit random number in the routing prefix. This random number is to "prevent collisions when two IPv6 networks are interconnected" -- again, another reference to an enterprise-level function. If I have a small local LAN at home, numbered using 192.168.4.0/24, what's my equivalent in IPv6's ULA scope? Assuming I will never, ever, tie that IPv6 address into the real internet (a router will NAT & firewall it), can I ignore the RFC to an extent and go with fc00::4:0/120? It also seems that any address in fc00::/7 are to be globally routable. Does this mean I'll need extra protections so my router would not automatically start advertising these private IPv6 addresses to the world? Second question, what's this link-local thing? Reading suggests a default-assigned address in the fe80::/10 range that has the last 64bits of the address comprised of the interface's MAC address. Seems to be required, too, but I'm annoyed by the constant discussion of it in relation to enterprise networks. Third question, what is scope id for? Seems to be yet another term tossed around in relation to enterprise networks, especially when interconnecting them, but almost no explanation on the smaller home network level. Can I see a scope ID AND CIDR notation used together? I.e., fc00::4:0/120%6, or are scope IDs only supposed to be applied to a single /128 IPv6 address?

  Read the article

• Method to integrate Powershell scripts with non-Windows workflow?

  - by Matt Simmons

  I love the smell of new machines in the morning. I'm automating a machine creation workflow that involves several separate systems across my infrastructure, some of which involve 15 year old perl scripts on Solaris hosts, PXE Booting Linux systems, and Powershell on Windows Server 2008. I can script each of the individual parts, and integrating the Linux and Unix automation is fairly straightforward, but I'm at a loss as to how to reliably tie together the Powershell scripts to the rest of the processes. I would prefer if the process began on a Linux host, since I imagine that it will end up as a web application living on an Apache server, but if it needs to begin on Windows, I am hesitantly okay with that. I would ideally like something along the lines of psexec for Linux to run against Windows, but the answer in that direction appears to by Cygwin, and as much as I appreciate all of the hard work that they put in, it has never felt right, if you know what I mean. It's great for a desktop and gives a lot of functionality, but I feel like Windows servers should be treated like Windows servers and not bastardized Unix machines (which, incidentally, is my argument against OSX servers, too, and they're actually Unix). Anyway, I don't want to go with Cygwin unless that's the last and only option. So I guess what I'm asking is if there is a way to execute jobs on Windows machines from Linux. Without Cygwin. I'm open to ideas and suggestions, including "Look idiot, everyone uses Cygwin, so suck it up and deal with it". Thanks in advance!

  Read the article

• RouterLess, house-wired network using multiple powerline adapters

  - by Cliff Arnell

  related to the 'old days' of one ethernet cable tapped with Ts for each monitor.... my question might be very simple... or not. I have an over-the-air internet provider with a wire dish with a powered transceiver and cat5 cable out of the providers supplied modem. I'm presently connecting the output of the modem into my wireless router which sends the internet signal all over the house. Standard stuff, I believe. My Question. Can I just connect the output of the modem into 1 powerline adapter and tie all my equipment such as computer, printer, laptop, Tivo recorder, etc. into 1-each local powerline adapters located near each devices resulting in a 'house-wired' network and no router? I'm bothered by the idea that my over-the-air provider might be using something in my router to establish and keep my IP connection alive. I did have to configure the router for my IP, a router which, in my proposed scenario, would no longer exist. Thank you for your help.

  Read the article

• What to do with old laptop screens?

  - by Lord Torgamus

  This question is inspired by another SU question I came across earlier today: What to do with old hard drives? It made me think about two long-dead laptops I have with perfectly good screens still inside. One is a Dell Inspiron 5100 and the other is an Averatec E1200, but responses need not be geared towards those particular models' screens. Rules, based heavily on the original question's: Objectives and suggestions to keep in mind when you post an answer : Should showcase your geekiness, be plain ol' fun, serve a social purpose or benefit the community. Your answer need not be limited to only one screen. For a really good answer, I'll go out and buy additional leftover screens. Your answer need not be limited to one project per screen. If additional accessories need be purchased, make sure they are common. Don't tell me to get a moon rock or something. The projects you suggested should serve a useful purpose; art is nice, but functional art is way better. Thanks in advance, folks. EDIT: Found another related question. Fun projects to do with an old 17" LCD monitor EDIT 2: I, for one, am enjoying the new outpouring of creativity here. Best fifty bucks... I mean, rep points... I ever spent. EDIT 3: That does it. At the end of the week, there was a tie for most votes between the accepted answer and the game platform answer. The game platform answer was cooler, but less reasonable as a project to actually do; in other words, it was more moon rocky. Unfortunately, I think fencepost had the best comment on the topic, which is that displays on their own have no good interface. Thanks for playing, everyone!

  Read the article

• Recommendations for good Unix MTA / groupware solutions? [closed]

  - by Jez

  Possible Duplicate: Exchange server replacement that runs on Linux I'm setting up a Debian server, and one of the things I need on it is an MTA. I don't want to use something like Exim or Postfix because I want something that ties in SMTP, POP3, and IMAP all in one (a la Microsoft Exchange). Most MTAs also seem to be hellishly difficult to configure. Try and read the Exim documentation; you could do a university degree on it (I'm not kidding). When you can get an HTTP server like Cherokee which is easy to configure and has a nice web interface, do MTAs or groupware solutions need to be that hard? I'm aware that some people think "the Unix way" is to have lots of different interacting pieces of software (like maybe an SMTP MTA, POP3 service, webmail service, and overarching manager to tie them all together), but I think this is a situation where that just makes things a lot harder to deal with and one large software suite fits in much more nicely. So, I'm looking for good open source software suites that will run on Debian that: Combine (at least) SMTP, POP3, and IMAP Are easy(ish) to configure Have a nice configuration web interface or GUI Are not defunct projects I don't mind if it's groupware and offers calendaring too, but I would only be using the e-mail functionality for now. Another nice-to-have would be built-in webmail (if we're combining a bunch of functionality, why not?) Note however that I do NOT need Outlook support. I am not really looking for an "Exchange replacement drop-in". The suites I've found so far that seem to match the above criteria (and have appropriate licenses) are Citadel, Kolab, and Zimbra. I'd appreciate anyone who has experience with any of these giving me the pros and cons of them, such as how easy they are to configure and what their performance is like. I'd also appreciate any other suggestions for solutions that fulfil my criteria that I may have missed out.

  Read the article

• Best way to patch (8) RJ45 ports from one room to another.

  - by zimmer62

  I have a 48 port patch panel in my basement, which I've wired almost all of them to various rooms around the house. Many are not actually being used at the moment, but pretty much all of them are wired to somewhere. As of recent, I've put in an HTPC in my media closet (different room), and I'm finding I need a lot more RJ45 plugs to this area. I have 4 drops here, and adding a switch will not solve my problems. I'm using the cabling for other things such as IR and Serial devices, not just Ethernet. What I'm hoping to do is add an 8 port panel in that media closet, and tie those into an 8 port panel on my rack next to the 48 port... What I don't want to do is pull 8 separate cables one by one from one area to the other unless someone has a technique that will allow me to do that quickly, and painlessly. Do they make cables with more conductors specifically for this purpose? Or patch panels that are designed for a special cable essentially just extending ports from one room to another?

  Read the article

• Using NServiceBus behind a custom web service

  - by Michael Stephenson

  In this post I'd like to talk about an architecture scenario we had recently and how we were able to utilise NServiceBus to help us address this problem. Scenario Cognos is a reporting system used by one of my clients. A while back we developed a web service façade to allow line of business applications to be able to access reports from Cognos to support their various functions. The service was intended to provide access to reports which were quick running reports or pre-generated reports which could be accessed real-time on demand. One of the key aims of the web service was to provide a simple generic interface to allow applications to get any report without needing to worry about the complex .net SDK for Cognos. The web service also supported multi-hop kerberos delegation so that report data could be accesses under the context of the end user. This service was working well for a period of time. The Problem The problem we encountered was that reports were now also required to be available to batch processes. The original design was optimised for low latency so users would enjoy a positive experience, however when the batch processes started to request 250+ concurrent reports over an extended period of time you can begin to imagine the sorts of problems that come into play. The key problems this new scenario caused are: Users may be affected and the latency of on demand reports was significantly slower The Cognos infrastructure was not scaled sufficiently to be able to cope with these long peaks of load From a cost perspective it just isn't feasible to scale the Cognos infrastructure to be able to handle the load when it is only for a couple of hour window each night. We really needed to introduce a second pattern for accessing this service which would support high through-put scenarios. We also had little control over the batch process in terms of being able to throttle its load. We could however make some changes to the way it accessed the reports. The Approach My idea was to introduce a throttling mechanism between the Web Service Façade and Cognos. This would allow the batch processes to push reports requests hard at the web service which we were confident the web service can handle. The web service would then queue these requests and process them behind the scenes and make a call back to the batch application to provide the report once it had been accessed. In terms of technology we had some limitations because we were not able to use WCF or IIS7 where the MSMQ-Activated WCF services could have helped, but we did have MSMQ as an option and I thought NServiceBus could do just the job to help us here. The flow of how this would work was as follows: The batch applications would send a request for a report to the web service The web service uses NServiceBus to send the message to a Queue The NServiceBus Generic Host is running as a windows service with a message handler which subscribes to these messages The message handler gets the message, accesses the report from Cognos The message handler calls back to the original batch application, this is decoupled because the calling application provides a call back url The report gets into the batch application and is processed as normal This approach looks something like the below diagram: The key points are an application wanting to take advantage of the batch driven reports needs to do the following: Implement our call back contract Make a call to the service providing a call back url Provide a correlation ID so it knows how to tie each response back to its request What does NServiceBus offer in this solution So this scenario is not the typical messaging service bus type of solution people implement with NServiceBus, but it did offer the following: Simplified interaction with MSMQ Offered the ability to configure the number of processes working through the queue so we could find a balance between load on Cognos versus the applications end to end processing time NServiceBus offers retries and a way to manage failed messages NServiceBus offers a high availability setup The simple thing is that NServiceBus gave us the platform to build the solution on. We just implemented a message handler which functionally processed a message and we could rely on NServiceBus to do all of the hard work around managing the queues and all of the lower level things that would have took ages to write to any kind of robust level. Conclusion With this approach we were able to deal with a fairly significant performance issue with out too much rework. Hopefully this write up gives people some insight into ideas on how to leverage the excellent NServiceBus framework to help solve integration and high through-put scenarios.

  Read the article

• Drupal Modules for SEO & Content

  - by Aditi

  When we talk about Drupal SEO, there are two things to consider one is about the relevant SEO practices and about appropriate Drupal Modules available. Optimizing your website for search engines is one of the most important aspect of launching & promoting your website especially if ranking matters to you. Understanding SEO For starters, you have begin with Keyword research and then optimize your content according to your findings by tagging, meta tags etc, Drupal modules once installed help you manage a lot of such parameters. Identifying the target keywords Using the Page Title and Token modules PathAuto configuration <H1> heading tags Optimizing Drupal’s default robots.txt file Etc. While Drupal gives you a lot of ability to make your website content worthy & search engine friendly it is important for you to make sure you are not crossing the line or you could get penalized. Modules Overview Drupal Power is at its best when you have these modules & great brain working together. The basic SEO improvements can be achieved easily with the modules enlisted below, but you can win magical rankings if you use them logically & wisely. Understanding your keyword competition & enhancing your content is the basic key to success and ofcourse the modules: Pathauto Automatically create search enging friendly readable URLS from tokens. A token is a piece of data from content, say the author’s username, or the content’s title. For example mysite.com/an-article, rather than mysite.com/node/114 for every node you make. NodeWords Amazingly useful drupal module that allows you to create custom meta tags and descriptions for your nodes, which gives you the ability to target specific keywords and phrases. Page Title Enables you to set an alternative title for the <title></title> tags and for the <h1></h1> tags on a node. Global Redirect Manage content duplication, 301 redirects, and URL validation with this small, but powerful module. Taxonomy manager Make large additions, or changes to taxonomy very easy. This module provides a powerful interface for managing taxonomies. A vocabulary gets displayed in a dynamic tree view, where parent terms can be expanded to list their nested child terms or can be collapsed. robotstxt A robots.txt file is vital for ensuring that search engine spiders don’t index the unwanted areas of your site. This Drupal module gives you the ability to manage your robots.txt file through the CMS admin. xmlsitemap An XML Sitemap lets the search engines index your website content. This module helps in generating and maintaining a complete sitemap for your website and gives you control over exactly which parts of the site you want to be included in the index. It even gives you the ability to automatically submit your sitemap to Google, Yahoo!, Ask.com and Windows Live every time you update a node or at specific interval. Node Import This module allows you to import a set of nodes from a Comma Seperated Values (CSV) or Tab Seperated Values (TSV) text file. Makes it easy to import hundreds-thousands of csv rows and you get to tie up these rows to CCK fields (or locations), and it can file it under the right taxonomy hierarchy. This is Super life saver module.

  Read the article

• F# WPF Form &ndash; the basics

  - by MarkPearl

  I was listening to Dot Net Rocks show #560 about F# and during the podcast Richard Campbell brought up a good point with regards to F# and a GUI. In essence what I understood his point to be was that until one could write an end to end application in F#, it would be a hard sell to developers to take it on. In part I agree with him, while I am beginning to really enjoy learning F#, I can’t but help feel that I would be a lot further into the language if I could do my Windows Forms like I do in C# or VB.NET for the simple reason that in “playing” applications I spend the majority of the time in the UI layer… So I have been keeping my eye out for some examples of creating a WPF form in a F# project and came across Tim’s F# Twitter Stream Sample, which had exactly this…. of course he actually had a bit more than a basic form… but it was enough for me to scrap the insides and glean what I needed. So today I am going to make just the very basic WPF form with all the goodness of a XAML window. Getting Started First thing we need to do is create a new solution with a blank F# application project – I have made mine called FSharpWPF. Once you have the project created you will need to change the project type from a Console Application to a Windows Application. You do this by right clicking on the project file and going to its properties… Once that is done you will need to add the appropriate references. You do this by right clicking on the References in the Solution Explorer and clicking “Add Reference'”. You should add the appropriate .Net references below for WPF & XAMl to work. Once these references are added you then need to add your XAML file to the project. You can do this by adding a new item to the project of type xml and simply changing the file extension from xml to xaml. Once the xaml file has been added to the project you will need to add valid window XAML. Example of a very basic xaml file is shown below… <Window xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="F# WPF WPF Form" Height="350" Width="525"> <Grid> </Grid> </Window> Once your xaml file is done… you need to set the build action of the xaml file from “None” to “Resource” as depicted in the picture below. If you do not set this you will get an IOException error when running the completed project with a message along the lines of “Cannot locate resource ‘window.xaml’ You then need to tie everything up by putting the correct F# code in the Program.fs to load the xaml window. In the Program.fs put the following code… module Program open System open System.Collections.ObjectModel open System.IO open System.Windows open System.Windows.Controls open System.Windows.Markup [<STAThread>] [<EntryPoint>] let main(_) = let w = Application.LoadComponent(new System.Uri("/FSharpWPF;component/Window.xaml", System.UriKind.Relative)) :?> Window (new Application()).Run(w) Once all this is done you should be able to build and run your project. What you have done is created a WPF based window inside a FSharp project. It should look something like below…   Nothing to exciting, but sufficient to illustrate the very basic WPF form in F#. Hopefully in future posts I will build on this to expose button events etc.

  Read the article

• The Hunger Games for Aspiring IT Professionals

  - by Dain C. Hansen

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} It seems that no one can escape the buzz around Hunger Games. And who could? Stephen King said it best in his review when he referred to the Collins’ novel as “a violent, jarring speed-rap of a novel that generates nearly constant suspense and may also generate a fair amount of controversy”. So what’s the tie in for IT? Let’s leave the dystopia of District 12 and come back to today’s reality. This is the world of radical IT paradigm shifts that haven’t been seen since Java was introduced in 1995. Everything you learned in school is probably outdated as of Friday. And everything you learned on Friday will probably change when you get to work on Monday. Nevertheless, we’re eager, we’re aspiring, we’re hungry to learn. While the challenges upon us may not rival the venomous bees (or ‘tracker jackers’) seen in this blockbuster, there are certainly obstacles to be found. In preparation, I leave you two pieces of advice - aside from avoiding werewolves… Learn the Cloud If you had asked me what to learn in 1995, I would have said, “Go learn Java”. But now my advice is “Go learn Java and then learn Cloud”. Cloud computing and Java go hand in hand. This is especially true for Oracle’s own Public Cloud which uses Java (via WebLogic 12c) as well as Oracle Database at its core foundation. Understanding the connotations of elasticity, scale, virtualization, and multi-tenancy, (to name just a few) requires a strong foundation in computer science and especially Java to get it right. Without Java, the Cloud is nothing more than a brittle application meagerly deployed on the internet. Get Social and Actively Participate And at all levels. Socializing your ideas internally is dreadfully important. And this means socializing and communicating your good ideas to lines of business, to architects, business analysts, developers, DBAs and Operations. But don’t forget to go external. Stay current by being on the lookout for blogs, tweets, webcasts, papers, podcasts and videos for your technology area. Be not just a subscriber but a participant in these channels as well. Attend industry and vendor sponsored events to learn from the experts – and seek out opportunities to stay connected with those that are smarter than you. You’ll gain more understanding if you participate actively. At the same time you’ll make friends (and allies) and you’ll be glad you did. Tell help you get social and actively participate [while learning the Cloud] here are a couple of pointers for you: See our website on Cloud and Fusion Middleware Subscribe to our regular Fusion Middleware Newsletter Follow us on Twitter and Facebook Find us at one of our key events Meanwhile, happy IT hunger games!

  Read the article

• Oracle at The Forrester Customer Intelligence and Marketing Leadership Forums

  - by Christie Flanagan

  The Forrester Customer Intelligence Forum and the Forrester Marketing Leadership Forums will soon be here.  This year’s events will be co-located on April 18-19 at the J.W. Marriott at the L.A. Live entertainment complex in downtown Los Angeles.  Last year’s Marketing Forum was quite memorable for me.  You see, while Forrester analysts and business marketers were busy mingling over at the Marriott, another marketing powerhouse was taking up residence a few feet away at The Staples Center.  That’s right folks. Lada Gaga was coming to town.  And, as I came to learn, it made perfect sense for Lady Gaga and her legions of fans to be sharing a small patch of downtown L.A. with marketing leaders from all over the world.  After all, whether you like Lady Gaga or not, what pop star in recent memory has done more to build herself into a brand and to create an engaging, social and interactive customer experience for her Little Monsters?  While Lady Gaga won’t be back in town for this year’s Forrester events, there are still plenty of compelling reasons to make the trip out to Los Angeles.   The theme for The Forrester Customer Intelligence and Marketing Leadership Forums this year is “From Cool To Critical: Creating Engagement In The Age Of The Customer” and will tackle the important questions about how marketers can survive and thrive in the age of the empowered customer: •    How can you assess consumer uptake of new innovations?•    How do you build deep customer knowledge to drive competitive advantage?•    How do you drive deep, personalized customer engagement?•    What is more valuable — eyeballs or engagement?•    How do business customers engage in new media types?•    How can you tie social data to corporate data?•    Who should lead the movement to customer obsession?•    How should you shift your planning and measurement approaches to accommodate more data and a higher signal-to-noise ratio?•    What role does technology play in customizing and synchronizing marketing efforts across channels?As a platinum sponsor of the event, there will be a numbers of ways to interact with Oracle while you’re attending the Forums.  Here are some of the highlights:Oracle Speaking SessionThursday, April 19, 9:15am – 9:55amMaximize Customer Engagement and Retention with Integrated Marketing & LoyaltyMelissa Boxer, Vice President, Oracle CRM Marketing & LoyaltyCustomers expect to interact with your company, brand and products in more ways than ever before.   New devices and channels, such as mobile, social and web, are creating radical shifts in the customer buying process and the ways your company can reach and communicate with existing and potential customers. While Marketing's objectives (attract, convert, retain) remain fundamentally the same, your approach and tools must adapt quickly to succeed in this more complex, cross-channel world. Hear how leading brands are using Oracle's integrated marketing and loyalty solutions to maximize customer engagement and retention through better planning, execution, and measurement of synchronized cross-channel marketing initiatives.Solution ShowcaseWednesday, April 1810:20am – 11:50am 12:30pm – 1:30pm2:55pm – 3:40pmThursday, April 199:55am – 10:40am12:00pm – 1:00pmSolution Showcase & Networking ReceptionWednesday, April 185:10pm – 6:20pmBe sure to follow the #webcenter hashtag for updates on these events.  And for a more considered perspective on what Lady Gaga can teach businesses about branding and customer experience, check out Denise Lee Yohn’s post, Lessons from Lady Gaga from the Brand as Business Bites blog.

  Read the article

< Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >