Search Results

Search found 789 results on 32 pages for 'william wind'.

Page 10/32 | < Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >

• Built-in GZip/Deflate Compression on IIS 7.x

  - by Rick Strahl

  IIS 7 improves internal compression functionality dramatically making it much easier than previous versions to take advantage of compression that’s built-in to the Web server. IIS 7 also supports dynamic compression which allows automatic compression of content created in your own applications (ASP.NET or otherwise!). The scheme is based on content-type sniffing and so it works with any kind of Web application framework. While static compression on IIS 7 is super easy to set up and turned on by default for most text content (text/*, which includes HTML and CSS, as well as for JavaScript, Atom, XAML, XML), setting up dynamic compression is a bit more involved, mostly because the various default compression settings are set in multiple places down the IIS –> ASP.NET hierarchy. Let’s take a look at each of the two approaches available: Static Compression Compresses static content from the hard disk. IIS can cache this content by compressing the file once and storing the compressed file on disk and serving the compressed alias whenever static content is requested and it hasn’t changed. The overhead for this is minimal and should be aggressively enabled. Dynamic Compression Works against application generated output from applications like your ASP.NET apps. Unlike static content, dynamic content must be compressed every time a page that requests it regenerates its content. As such dynamic compression has a much bigger impact than static caching. How Compression is configured Compression in IIS 7.x  is configured with two .config file elements in the <system.WebServer> space. The elements can be set anywhere in the IIS/ASP.NET configuration pipeline all the way from ApplicationHost.config down to the local web.config file. The following is from the the default setting in ApplicationHost.config (in the %windir%\System32\inetsrv\config forlder) on IIS 7.5 with a couple of small adjustments (added json output and enabled dynamic compression): <?xml version="1.0" encoding="UTF-8"?> <configuration> <system.webServer> <httpCompression directory="%SystemDrive%\inetpub\temp\IIS Temporary Compressed Files"> <scheme name="gzip" dll="%Windir%\system32\inetsrv\gzip.dll" staticCompressionLevel="9" /> <dynamicTypes> <add mimeType="text/*" enabled="true" /> <add mimeType="message/*" enabled="true" /> <add mimeType="application/x-javascript" enabled="true" /> <add mimeType="application/json" enabled="true" /> <add mimeType="*/*" enabled="false" /> </dynamicTypes> <staticTypes> <add mimeType="text/*" enabled="true" /> <add mimeType="message/*" enabled="true" /> <add mimeType="application/x-javascript" enabled="true" /> <add mimeType="application/atom+xml" enabled="true" /> <add mimeType="application/xaml+xml" enabled="true" /> <add mimeType="*/*" enabled="false" /> </staticTypes> </httpCompression> <urlCompression doStaticCompression="true" doDynamicCompression="true" /> </system.webServer> </configuration> You can find documentation on the httpCompression and urlCompression keys here respectively: http://msdn.microsoft.com/en-us/library/ms690689%28v=vs.90%29.aspx http://msdn.microsoft.com/en-us/library/aa347437%28v=vs.90%29.aspx The httpCompression Element – What and How to compress Basically httpCompression configures what types to compress and how to compress them. It specifies the DLL that handles gzip encoding and the types of documents that are to be compressed. Types are set up based on mime-types which looks at returned Content-Type headers in HTTP responses. For example, I added the application/json to mime type to my dynamic compression types above to allow that content to be compressed as well since I have quite a bit of AJAX content that gets sent to the client. The UrlCompression Element – Enables and Disables Compression The urlCompression element is a quick way to turn compression on and off. By default static compression is enabled server wide, and dynamic compression is disabled server wide. This might be a bit confusing because the httpCompression element also has a doDynamicCompression attribute which is set to true by default, but the urlCompression attribute by the same name actually overrides it. The urlCompression element only has three attributes: doStaticCompression, doDynamicCompression and dynamicCompressionBeforeCache. The doCompression attributes are the final determining factor whether compression is enabled, so it’s a good idea to be explcit! The default for doDynamicCompression='false”, but doStaticCompression="true"! Static Compression is enabled by Default, Dynamic Compression is not Because static compression is very efficient in IIS 7 it’s enabled by default server wide and there probably is no reason to ever change that setting. Dynamic compression however, since it’s more resource intensive, is turned off by default. If you want to enable dynamic compression there are a few quirks you have to deal with, namely that enabling it in ApplicationHost.config doesn’t work. Setting: <urlCompression doDynamicCompression="true" /> in applicationhost.config appears to have no effect and I had to move this element into my local web.config to make dynamic compression work. This is actually a smart choice because you’re not likely to want dynamic compression in every application on a server. Rather dynamic compression should be applied selectively where it makes sense. However, nowhere is it documented that the setting in applicationhost.config doesn’t work (or more likely is overridden somewhere and disabled lower in the configuration hierarchy). So: remember to set doDynamicCompression=”true” in web.config!!! How Static Compression works Static compression works against static content loaded from files on disk. Because this content is static and not bound to change frequently – such as .js, .css and static HTML content – it’s fairly easy for IIS to compress and then cache the compressed content. The way this works is that IIS compresses the files into a special folder on the server’s hard disk and then reads the content from this location if already compressed content is requested and the underlying file resource has not changed. The semantics of serving an already compressed file are very efficient – IIS still checks for file changes, but otherwise just serves the already compressed file from the compression folder. The compression folder is located at: %windir%\inetpub\temp\IIS Temporary Compressed Files\ApplicationPool\ If you look into the subfolders you’ll find compressed files: These files are pre-compressed and IIS serves them directly to the client until the underlying files are changed. As I mentioned before – static compression is on by default and there’s very little reason to turn that functionality off as it is efficient and just works out of the box. The one tweak you might want to do is to set the compression level to maximum. Since IIS only compresses content very infrequently it would make sense to apply maximum compression. You can do this with the staticCompressionLevel setting on the scheme element: <scheme name="gzip" dll="%Windir%\system32\inetsrv\gzip.dll" staticCompressionLevel="9" /> Other than that the default settings are probably just fine. Dynamic Compression – not so fast! By default dynamic compression is disabled and that’s actually quite sensible – you should use dynamic compression very carefully and think about what content you want to compress. In most applications it wouldn’t make sense to compress *all* generated content as it would generate a significant amount of overhead. Scott Fortsyth has a great post that details some of the performance numbers and how much impact dynamic compression has. Depending on how busy your server is you can play around with compression and see what impact it has on your server’s performance. There are also a few settings you can tweak to minimize the overhead of dynamic compression. Specifically the httpCompression key has a couple of CPU related keys that can help minimize the impact of Dynamic Compression on a busy server: dynamicCompressionDisableCpuUsage dynamicCompressionEnableCpuUsage By default these are set to 90 and 50 which means that when the CPU hits 90% compression will be disabled until CPU utilization drops back down to 50%. Again this is actually quite sensible as it utilizes CPU power from compression when available and falling off when the threshold has been hit. It’s a good way some of that extra CPU power on your big servers to use when utilization is low. Again these settings are something you likely have to play with. I would probably set the upper limit a little lower than 90% maybe around 70% to make this a feature that kicks in only if there’s lots of power to spare. I’m not really sure how accurate these CPU readings that IIS uses are as Cpu usage on Web Servers can spike drastically even during low loads. Don’t trust settings – do some load testing or monitor your server in a live environment to see what values make sense for your environment. Finally for dynamic compression I tend to add one Mime type for JSON data, since a lot of my applications send large chunks of JSON data over the wire. You can do that with the application/json content type: <add mimeType="application/json" enabled="true" /> What about Deflate Compression? The default compression is GZip. The documentation hints that you can use a different compression scheme and mentions Deflate compression. And sure enough you can change the compression settings to: <scheme name="deflate" dll="%Windir%\system32\inetsrv\gzip.dll" staticCompressionLevel="9" /> to get deflate style compression. The deflate algorithm produces slightly more compact output so I tend to prefer it over GZip but more HTTP clients (other than browsers) support GZip than Deflate so be careful with this option if you build Web APIs. I also had some issues with the above value actually being applied right away. Changing the scheme in applicationhost.config didn’t show up on the site  right away. It required me to do a full IISReset to get that change to show up before I saw the change over to deflate compressed content. Content was slightly more compressed with deflate – not sure if it’s worth the slightly less common compression type, but the option at least is available. IIS 7 finally makes GZip Easy In summary IIS 7 makes GZip easy finally, even if the configuration settings are a bit obtuse and the documentation is seriously lacking. But once you know the basic settings I’ve described here and the fact that you can override all of this in your local web.config it’s pretty straight forward to configure GZip support and tweak it exactly to your needs. Static compression is a total no brainer as it adds very little overhead compared to direct static file serving and provides solid compression. Dynamic Compression is a little more tricky as it does add some overhead to servers, so it probably will require some tweaking to get the right balance of CPU load vs. compression ratios. Looking at large sites like Amazon, Yahoo, NewEgg etc. – they all use Related Content Code based ASP.NET GZip Caveats HttpWebRequest and GZip Responses © Rick Strahl, West Wind Technologies, 2005-2011Posted in IIS7   ASP.NET  

  Read the article

• Passing multiple POST parameters to Web API Controller Methods

  - by Rick Strahl

  ASP.NET Web API introduces a new API for creating REST APIs and making AJAX callbacks to the server. This new API provides a host of new great functionality that unifies many of the features of many of the various AJAX/REST APIs that Microsoft created before it - ASP.NET AJAX, WCF REST specifically - and combines them into a whole more consistent API. Web API addresses many of the concerns that developers had with these older APIs, namely that it was very difficult to build consistent REST style resource APIs easily. While Web API provides many new features and makes many scenarios much easier, a lot of the focus has been on making it easier to build REST compliant APIs that are focused on resource based solutions and HTTP verbs. But  RPC style calls that are common with AJAX callbacks in Web applications, have gotten a lot less focus and there are a few scenarios that are not that obvious, especially if you're expecting Web API to provide functionality similar to ASP.NET AJAX style AJAX callbacks. RPC vs. 'Proper' REST RPC style HTTP calls mimic calling a method with parameters and returning a result. Rather than mapping explicit server side resources or 'nouns' RPC calls tend simply map a server side operation, passing in parameters and receiving a typed result where parameters and result values are marshaled over HTTP. Typically RPC calls - like SOAP calls - tend to always be POST operations rather than following HTTP conventions and using the GET/POST/PUT/DELETE etc. verbs to implicitly determine what operation needs to be fired. RPC might not be considered 'cool' anymore, but for typical private AJAX backend operations of a Web site I'd wager that a large percentage of use cases of Web API will fall towards RPC style calls rather than 'proper' REST style APIs. Web applications that have needs for things like live validation against data, filling data based on user inputs, handling small UI updates often don't lend themselves very well to limited HTTP verb usage. It might not be what the cool kids do, but I don't see RPC calls getting replaced by proper REST APIs any time soon.  Proper REST has its place - for 'real' API scenarios that manage and publish/share resources, but for more transactional operations RPC seems a better choice and much easier to implement than trying to shoehorn a boatload of endpoint methods into a few HTTP verbs. In any case Web API does a good job of providing both RPC abstraction as well as the HTTP Verb/REST abstraction. RPC works well out of the box, but there are some differences especially if you're coming from ASP.NET AJAX service or WCF Rest when it comes to multiple parameters. Action Routing for RPC Style Calls If you've looked at Web API demos you've probably seen a bunch of examples of how to create HTTP Verb based routing endpoints. Verb based routing essentially maps a controller and then uses HTTP verbs to map the methods that are called in response to HTTP requests. This works great for resource APIs but doesn't work so well when you have many operational methods in a single controller. HTTP Verb routing is limited to the few HTTP verbs available (plus separate method signatures) and - worse than that - you can't easily extend the controller with custom routes or action routing beyond that. Thankfully Web API also supports Action based routing which allows you create RPC style endpoints fairly easily:RouteTable.Routes.MapHttpRoute( name: "AlbumRpcApiAction", routeTemplate: "albums/{action}/{title}", defaults: new { title = RouteParameter.Optional, controller = "AlbumApi", action = "GetAblums" } ); This uses traditional MVC style {action} method routing which is different from the HTTP verb based routing you might have read a bunch about in conjunction with Web API. Action based routing like above lets you specify an end point method in a Web API controller either via the {action} parameter in the route string or via a default value for custom routes. Using routing you can pass multiple parameters either on the route itself or pass parameters on the query string, via ModelBinding or content value binding. For most common scenarios this actually works very well. As long as you are passing either a single complex type via a POST operation, or multiple simple types via query string or POST buffer, there's no issue. But if you need to pass multiple parameters as was easily done with WCF REST or ASP.NET AJAX things are not so obvious. Web API has no issue allowing for single parameter like this:[HttpPost] public string PostAlbum(Album album) { return String.Format("{0} {1:d}", album.AlbumName, album.Entered); } There are actually two ways to call this endpoint: albums/PostAlbum Using the Model Binder with plain POST values In this mechanism you're sending plain urlencoded POST values to the server which the ModelBinder then maps the parameter. Each property value is matched to each matching POST value. This works similar to the way that MVC's  ModelBinder works. Here's how you can POST using the ModelBinder and jQuery:$.ajax( { url: "albums/PostAlbum", type: "POST", data: { AlbumName: "Dirty Deeds", Entered: "5/1/2012" }, success: function (result) { alert(result); }, error: function (xhr, status, p3, p4) { var err = "Error " + " " + status + " " + p3; if (xhr.responseText && xhr.responseText[0] == "{") err = JSON.parse(xhr.responseText).message; alert(err); } }); Here's what the POST data looks like for this request: The model binder and it's straight form based POST mechanism is great for posting data directly from HTML pages to model objects. It avoids having to do manual conversions for many operations and is a great boon for AJAX callback requests. Using Web API JSON Formatter The other option is to post data using a JSON string. The process for this is similar except that you create a JavaScript object and serialize it to JSON first.album = { AlbumName: "PowerAge", Entered: new Date(1977,0,1) } $.ajax( { url: "albums/PostAlbum", type: "POST", contentType: "application/json", data: JSON.stringify(album), success: function (result) { alert(result); } }); Here the data is sent using a JSON object rather than form data and the data is JSON encoded over the wire. The trace reveals that the data is sent using plain JSON (Source above), which is a little more efficient since there's no UrlEncoding that occurs. BTW, notice that WebAPI automatically deals with the date. I provided the date as a plain string, rather than a JavaScript date value and the Formatter and ModelBinder both automatically map the date propertly to the Entered DateTime property of the Album object. Passing multiple Parameters to a Web API Controller Single parameters work fine in either of these RPC scenarios and that's to be expected. ModelBinding always works against a single object because it maps a model. But what happens when you want to pass multiple parameters? Consider an API Controller method that has a signature like the following:[HttpPost] public string PostAlbum(Album album, string userToken) Here I'm asking to pass two objects to an RPC method. Is that possible? This used to be fairly straight forward either with WCF REST and ASP.NET AJAX ASMX services, but as far as I can tell this is not directly possible using a POST operation with WebAPI. There a few workarounds that you can use to make this work: Use both POST *and* QueryString Parameters in Conjunction If you have both complex and simple parameters, you can pass simple parameters on the query string. The above would actually work with: /album/PostAlbum?userToken=sekkritt but that's not always possible. In this example it might not be a good idea to pass a user token on the query string though. It also won't work if you need to pass multiple complex objects, since query string values do not support complex type mapping. They only work with simple types. Use a single Object that wraps the two Parameters If you go by service based architecture guidelines every service method should always pass and return a single value only. The input should wrap potentially multiple input parameters and the output should convey status as well as provide the result value. You typically have a xxxRequest and a xxxResponse class that wraps the inputs and outputs. Here's what this method might look like:public PostAlbumResponse PostAlbum(PostAlbumRequest request) { var album = request.Album; var userToken = request.UserToken; return new PostAlbumResponse() { IsSuccess = true, Result = String.Format("{0} {1:d} {2}", album.AlbumName, album.Entered,userToken) }; } with these support types:public class PostAlbumRequest { public Album Album { get; set; } public User User { get; set; } public string UserToken { get; set; } } public class PostAlbumResponse { public string Result { get; set; } public bool IsSuccess { get; set; } public string ErrorMessage { get; set; } }   To call this method you now have to assemble these objects on the client and send it up as JSON:var album = { AlbumName: "PowerAge", Entered: "1/1/1977" } var user = { Name: "Rick" } var userToken = "sekkritt"; $.ajax( { url: "samples/PostAlbum", type: "POST", contentType: "application/json", data: JSON.stringify({ Album: album, User: user, UserToken: userToken }), success: function (result) { alert(result.Result); } }); I assemble the individual types first and then combine them in the data: property of the $.ajax() call into the actual object passed to the server, that mimics the structure of PostAlbumRequest server class that has Album, User and UserToken properties. This works well enough but it gets tedious if you have to create Request and Response types for each method signature. If you have common parameters that are always passed (like you always pass an album or usertoken) you might be able to abstract this to use a single object that gets reused for all methods, but this gets confusing too: Overload a single 'parameter' too much and it becomes a nightmare to decipher what your method actual can use. Use JObject to parse multiple Property Values out of an Object If you recall, ASP.NET AJAX and WCF REST used a 'wrapper' object to make default AJAX calls. Rather than directly calling a service you always passed an object which contained properties for each parameter: { parm1: Value, parm2: Value2 } WCF REST/ASP.NET AJAX would then parse this top level property values and map them to the parameters of the endpoint method. This automatic type wrapping functionality is no longer available directly in Web API, but since Web API now uses JSON.NET for it's JSON serializer you can actually simulate that behavior with a little extra code. You can use the JObject class to receive a dynamic JSON result and then using the dynamic cast of JObject to walk through the child objects and even parse them into strongly typed objects. Here's how to do this on the API Controller end:[HttpPost] public string PostAlbum(JObject jsonData) { dynamic json = jsonData; JObject jalbum = json.Album; JObject juser = json.User; string token = json.UserToken; var album = jalbum.ToObject<Album>(); var user = juser.ToObject<User>(); return String.Format("{0} {1} {2}", album.AlbumName, user.Name, token); } This is clearly not as nice as having the parameters passed directly, but it works to allow you to pass multiple parameters and access them using Web API. JObject is JSON.NET's generic object container which sports a nice dynamic interface that allows you to walk through the object's properties using standard 'dot' object syntax. All you have to do is cast the object to dynamic to get access to the property interface of the JSON type. Additionally JObject also allows you to parse JObject instances into strongly typed objects, which enables us here to retrieve the two objects passed as parameters from this jquery code:var album = { AlbumName: "PowerAge", Entered: "1/1/1977" } var user = { Name: "Rick" } var userToken = "sekkritt"; $.ajax( { url: "samples/PostAlbum", type: "POST", contentType: "application/json", data: JSON.stringify({ Album: album, User: user, UserToken: userToken }), success: function (result) { alert(result); } }); Summary ASP.NET Web API brings many new features and many advantages over the older Microsoft AJAX and REST APIs, but realize that some things like passing multiple strongly typed object parameters will work a bit differently. It's not insurmountable, but just knowing what options are available to simulate this behavior is good to know. Now let me say here that it's probably not a good practice to pass a bunch of parameters to an API call. Ideally APIs should be closely factored to accept single parameters or a single content parameter at least along with some identifier parameters that can be passed on the querystring. But saying that doesn't mean that occasionally you don't run into a situation where you have the need to pass several objects to the server and all three of the options I mentioned might have merit in different situations. For now I'm sure the question of how to pass multiple parameters will come up quite a bit from people migrating WCF REST or ASP.NET AJAX code to Web API. At least there are options available to make it work.© Rick Strahl, West Wind Technologies, 2005-2012Posted in Web Api   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• AngularJs ng-cloak Problems on large Pages

  - by Rick Strahl

  I’ve been working on a rather complex and large Angular page. Unlike a typical AngularJs SPA style ‘application’ this particular page is just that: a single page with a large amount of data on it that has to be visible all at once. The problem is that when this large page loads it flickers and displays template markup briefly before kicking into its actual content rendering. This is is what the Angular ng-cloak is supposed to address, but in this case I had no luck getting it to work properly. This application is a shop floor app where workers need to see all related information in one big screen view, so some of the benefits of Angular’s routing and view swapping features couldn’t be applied. Instead, we decided to have one very big view but lots of ng-controllers and directives to break out the logic for code separation. For code separation this works great – there are a number of small controllers that deal with their own individual and isolated application concerns. For HTML separation we used partial ASP.NET MVC Razor Views which made breaking out the HTML into manageable pieces super easy and made migration of this page from a previous server side Razor page much easier. We were also able to leverage most of our server side localization without a lot of  changes as a bonus. But as a result of this choice the initial HTML document that loads is rather large – even without any data loaded into it, resulting in a fairly large DOM tree that Angular must manage. Large Page and Angular Startup The problem on this particular page is that there’s quite a bit of markup – 35k’s worth of markup without any data loaded, in fact. It’s a large HTML page with a complex DOM tree. There are quite a lot of Angular {{ }} markup expressions in the document. Angular provides the ng-cloak directive to try and hide the element it cloaks so that you don’t see the flash of these markup expressions when the page initially loads before Angular has a chance to render the data into the markup expressions.<div id="mainContainer" class="mainContainer boxshadow" ng-app="app" ng-cloak> Note the ng-cloak attribute on this element, which here is an outer wrapper element of the most of this large page’s content. ng-cloak is supposed to prevent displaying the content below it, until Angular has taken control and is ready to render the data into the templates. Alas, with this large page the end result unfortunately is a brief flicker of un-rendered markup which looks like this: It’s brief, but plenty ugly – right?  And depending on the speed of the machine this flash gets more noticeable with slow machines that take longer to process the initial HTML DOM. ng-cloak Styles ng-cloak works by temporarily hiding the marked up element and it does this by essentially applying a style that does this:[ng\:cloak], [ng-cloak], [data-ng-cloak], [x-ng-cloak], .ng-cloak, .x-ng-cloak { display: none !important; } This style is inlined as part of AngularJs itself. If you looking at the angular.js source file you’ll find this at the very end of the file:!angular.$$csp() && angular.element(document) .find('head') .prepend('<style type="text/css">@charset "UTF-8";[ng\\:cloak],[ng-cloak],' + '[data-ng-cloak],[x-ng-cloak],.ng-cloak,.x-ng-cloak,' + '.ng-hide{display:none !important;}ng\\:form{display:block;}' '.ng-animate-block-transitions{transition:0s all!important;-webkit-transition:0s all!important;}' + '</style>'); This is is meant to initially hide any elements that contain the ng-cloak attribute or one of the other Angular directive permutation markup. Unfortunately on this particular web page ng-cloak had no effect – I still see the flicker. Why doesn’t ng-cloak work? The problem is of course – timing. The problem is that Angular actually needs to get control of the page before it ever starts doing anything like process even the ng-cloak attribute (or style etc). Because this page is rather large (about 35k of non-data HTML) it takes a while for the DOM to actually plow through the HTML. With the Angular <script> tag defined at the bottom of the page after the HTML DOM content there’s a slight delay which causes the flicker. For smaller pages the initial DOM load/parse cycle is so fast that the markup never shows, but with larger content pages it may show and become an annoying problem. Workarounds There a number of simple ways around this issue and some of them are hinted on in the Angular documentation. Load Angular Sooner One obvious thing that would help with this is to load Angular at the top of the page  BEFORE the DOM loads and that would give it much earlier control. The old ng-cloak documentation actually recommended putting the Angular.js script into the header of the page (apparently this was recently removed), but generally it’s not a good practice to load scripts in the header for page load performance. This is especially true if you load other libraries like jQuery which should be loaded prior to loading Angular so it can use jQuery rather than its own jqLite subset. This is not something I normally would like to do and also something that I’d likely forget in the future and end up right back here :-). Use ng-include for Child Content Angular supports nesting of child templates via the ng-include directive which essentially delay loads HTML content. This helps by removing a lot of the template content out of the main page and so getting control to Angular a lot sooner in order to hide the markup template content. In the application in question, I realize that in hindsight it might have been smarter to break this page out with client side ng-include directives instead of MVC Razor partial views we used to break up the page sections. Razor partial views give that nice separation as well, but in the end Razor puts humpty dumpty (ie. the HTML) back together into a whole single and rather large HTML document. Razor provides the logical separation, but still results in a large physical result document. But Razor also ended up being helpful to have a few security related blocks handled via server side template logic that simply excludes certain parts of the UI the user is not allowed to see – something that you can’t really do with client side exclusion like ng-hide/ng-show – client side content is always there whereas on the server side you can simply not send it to the client. Another reason I’m not a huge fan of ng-include is that it adds another HTTP hit to a request as templates are loaded from the server dynamically as needed. Given that this page was already heavy with resources adding another 10 separate ng-include directives wouldn’t be beneficial :-) ng-include is a valid option if you start from scratch and partition your logic. Of course if you don’t have complex pages, having completely separate views that are swapped in as they are accessed are even better, but we didn’t have this option due to the information having to be on screen all at once. Avoid using {{ }}  Expressions The biggest issue that ng-cloak attempts to address isn’t so much displaying the original content – it’s displaying empty {{ }} markup expression tags that get embedded into content. It gives you the dreaded “now you see it, now you don’t” effect where you sometimes see three separate rendering states: Markup junk, empty views, then views filled with data. If we can remove {{ }} expressions from the page you remove most of the perceived double draw effect as you would effectively start with a blank form and go straight to a filled form. To do this you can forego {{ }}  expressions and replace them with ng-bind directives on DOM elements. For example you can turn:<div class="list-item-name listViewOrderNo"> <a href='#'>{{lineItem.MpsOrderNo}}</a> </div>into:<div class="list-item-name listViewOrderNo"> <a href="#" ng-bind="lineItem.MpsOrderNo"></a> </div> to get identical results but because the {{ }}  expression has been removed there’s no double draw effect for this element. Again, not a great solution. The {{ }} syntax sure reads cleaner and is more fluent to type IMHO. In some cases you may also not have an outer element to attach ng-bind to which then requires you to artificially inject DOM elements into the page. This is especially painful if you have several consecutive values like {{Firstname}} {{Lastname}} for example. It’s an option though especially if you think of this issue up front and you don’t have a ton of expressions to deal with. Add the ng-cloak Styles manually You can also explicitly define the .css styles that Angular injects via code manually in your application’s style sheet. By doing so the styles become immediately available and so are applied right when the page loads – no flicker. I use the minimal:[ng-cloak] { display: none !important; } which works for:<div id="mainContainer" class="mainContainer dialog boxshadow" ng-app="app" ng-cloak> If you use one of the other combinations add the other CSS selectors as well or use the full style shown earlier. Angular will still load its version of the ng-cloak styling but it overrides those settings later, but this will do the trick of hiding the content before that CSS is injected into the page. Adding the CSS in your own style sheet works well, and is IMHO by far the best option. The nuclear option: Hiding the Content manually Using the explicit CSS is the best choice, so the following shouldn’t ever be necessary. But I’ll mention it here as it gives some insight how you can hide/show content manually on load for other frameworks or in your own markup based templates. Before I figured out that I could explicitly embed the CSS style into the page, I had tried to figure out why ng-cloak wasn’t doing its job. After wasting an hour getting nowhere I finally decided to just manually hide and show the container. The idea is simple – initially hide the container, then show it once Angular has done its initial processing and removal of the template markup from the page. You can manually hide the content and make it visible after Angular has gotten control. To do this I used:<div id="mainContainer" class="mainContainer boxshadow" ng-app="app" style="display:none"> Notice the display: none style that explicitly hides the element initially on the page. Then once Angular has run its initialization and effectively processed the template markup on the page you can show the content. For Angular this ‘ready’ event is the app.run() function:app.run( function ($rootScope, $location, cellService) { $("#mainContainer").show(); … }); This effectively removes the display:none style and the content displays. By the time app.run() fires the DOM is ready to displayed with filled data or at least empty data – Angular has gotten control. Edge Case Clearly this is an edge case. In general the initial HTML pages tend to be reasonably sized and the load time for the HTML and Angular are fast enough that there’s no flicker between the rendering times. This only becomes an issue as the initial pages get rather large. Regardless – if you have an Angular application it’s probably a good idea to add the CSS style into your application’s CSS (or a common shared one) just to make sure that content is always hidden. You never know how slow of a browser somebody might be running and while your super fast dev machine might not show any flicker, grandma’s old XP box very well might…© Rick Strahl, West Wind Technologies, 2005-2014Posted in Angular  JavaScript  CSS  HTML   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• DevConnections Session Slides, Samples and Links

  - by Rick Strahl

  Finally coming up for air this week, after catching up with being on the road for the better part of three weeks. Here are my slides, samples and links for my four DevConnections Session two weeks ago in Vegas. I ended up doing one extra un-prepared for session on WebAPI and AJAX, as some of the speakers were either delayed or unable to make it at all to Vegas due to Sandy's mayhem. It was pretty hectic in the speaker room as Erik (our event coordinator extrodinaire) was scrambling to fill session slots with speakers :-). Surprisingly it didn't feel like the storm affected attendance drastically though, but I guess it's hard to tell without actual numbers. The conference was a lot of fun - it's been a while since I've been speaking at one of these larger conferences. I'd been taking a hiatus, and I forgot how much I enjoy actually giving talks. Preparing - well not  quite so much, especially since I ended up essentially preparing or completely rewriting for all three of these talks and I was stressing out a bit as I was sick the week before the conference and didn't get as much time to prepare as I wanted to. But - as always seems to be the case - it all worked out, but I guess those that attended have to be the judge of that… It was great to catch up with my speaker friends as well - man I feel out of touch. I got to spend a bunch of time with Dan Wahlin, Ward Bell, Julie Lerman and for about 10 minutes even got to catch up with the ever so busy Michele Bustamante. Lots of great technical discussions including a fun and heated REST controversy with Ward and Howard Dierking. There were also a number of great discussions with attendees, describing how they're using the technologies touched in my talks in live applications. I got some great ideas from some of these and I wish there would have been more opportunities for these kinds of discussions. One thing I miss at these Vegas events though is some sort of coherent event where attendees and speakers get to mingle. These Vegas conferences are just like "go to sessions, then go out and PARTY on the town" - it's Vegas after all! But I think that it's always nice to have at least one evening event where everybody gets to hang out together and trade stories and geek talk. Overall there didn't seem to be much opportunity for that beyond lunch or the small and short exhibit hall events which it seemed not many people actually went to. Anyways, a good time was had. I hope those of you that came to my sessions learned something useful. There were lots of great questions and discussions after the sessions - always appreciate hearing the real life scenarios that people deal with in relation to the abstracted scenarios in sessions. Here are the Session abstracts, a few comments and the links for downloading slides and  samples. It's not quite like being there, but I hope this stuff turns out to be useful to some of you. I'll be following up a couple of these sessions with white papers in the following weeks. Enjoy. ASP.NET Architecture: How ASP.NET Works at the Low Level Abstract:Interested in how ASP.NET works at a low level? ASP.NET is extremely powerful and flexible technology, but it's easy to forget about the core framework that underlies the higher level technologies like ASP.NET MVC, WebForms, WebPages, Web Services that we deal with on a day to day basis. The ASP.NET core drives all the higher level handlers and frameworks layered on top of it and with the core power comes some complexity in the form of a very rich object model that controls the flow of a request through the ASP.NET pipeline from Windows HTTP services down to the application level. To take full advantage of it, it helps to understand the underlying architecture and model. This session discusses the architecture of ASP.NET along with a number of useful tidbits that you can use for building and debugging your ASP.NET applications more efficiently. We look at overall architecture, how requests flow from the IIS (7 and later) Web Server to the ASP.NET runtime into HTTP handlers, modules and filters and finally into high-level handlers like MVC, Web Forms or Web API. Focus of this session is on the low-level aspects on the ASP.NET runtime, with examples that demonstrate the bootstrapping of ASP.NET, threading models, how Application Domains are used, startup bootstrapping, how configuration files are applied and how all of this relates to the applications you write either using low-level tools like HTTP handlers and modules or high-level pages or services sitting at the top of the ASP.NET runtime processing chain. Comments:I was surprised to see so many people show up for this session - especially since it was the last session on the last day and a short 1 hour session to boot. The room was packed and it was to see so many people interested the abstracts of architecture of ASP.NET beyond the immediate high level application needs. Lots of great questions in this talk as well - I only wish this session would have been the full hour 15 minutes as we just a little short of getting through the main material (didn't make it to Filters and Error handling). I haven't done this session in a long time and I had to pretty much re-figure all the system internals having to do with the ASP.NET bootstrapping in light for the changes that came with IIS 7 and later. The last time I did this talk was with IIS6, I guess it's been a while. I love doing this session, mainly because in my mind the core of ASP.NET overall is so cleanly designed to provide maximum flexibility without compromising performance that has clearly stood the test of time in the 10 years or so that .NET has been around. While there are a lot of moving parts, the technology is easy to manage once you understand the core components and the core model hasn't changed much even while the underlying architecture that drives has been almost completely revamped especially with the introduction of IIS 7 and later. Download Samples and Slides   Introduction to using jQuery with ASP.NET Abstract:In this session you'll learn how to take advantage of jQuery in your ASP.NET applications. Starting with an overview of jQuery client features via many short and fun examples, you'll find out about core features like the power of selectors for document element selection, manipulating these elements with jQuery's wrapped set methods in a browser independent way, how to hook up and handle events easily and generally apply concepts of unobtrusive JavaScript principles to client scripting. The second half of the session then delves into jQuery's AJAX features and several different ways how you can interact with ASP.NET on the server. You'll see examples of using ASP.NET MVC for serving HTML and JSON AJAX content, as well as using the new ASP.NET Web API to serve JSON and hypermedia content. You'll also see examples of client side templating/databinding with Handlebars and Knockout. Comments:This session was in a monster of a room and to my surprise it was nearly packed, given that this was a 100 level session. I can see that it's a good idea to continue to do intro sessions to jQuery as there appeared to be quite a number of folks who had not worked much with jQuery yet and who most likely could greatly benefit from using it. Seemed seemed to me the session got more than a few people excited to going if they hadn't yet :-).  Anyway I just love doing this session because it's mostly live coding and highly interactive - not many sessions that I can build things up from scratch and iterate on in an hour. jQuery makes that easy though. Resources: Slides and Code Samples Introduction to jQuery White Paper Introduction to ASP.NET Web API   Hosting the Razor Scripting Engine in Your Own Applications Abstract:The Razor Engine used in ASP.NET MVC and ASP.NET Web Pages is a free-standing scripting engine that can be disassociated from these Web-specific implementations and can be used in your own applications. Razor allows for a powerful mix of code and text rendering that makes it a wonderful tool for any sort of text generation, from creating HTML output in non-Web applications, to rendering mail merge-like functionality, to code generation for developer tools and even as a plug-in scripting engine. In this session, we'll look at the components that make up the Razor engine and how you can bootstrap it in your own applications to hook up templating. You'll find out how to create custom templates and manage Razor requests that can be pre-compiled, detecting page changes and act in ways similar to a full runtime. We look at ways that you can pass data into the engine and retrieve both the rendered output as well as result values in a package that makes it easy to plug Razor into your own applications. Comments:That this session was picked was a bit of a surprise to me, since it's a bit of a niche topic. Even more of a surprise was that during the session quite a few people who attended had actually used Razor externally and were there to find out more about how the process works and how to extend it. In the session I talk a bit about a custom Razor hosting implementation (Westwind.RazorHosting) and drilled into the various components required to build a custom Razor Hosting engine and a runtime around it. This sessions was a bit of a chore to prepare for as there are lots of technical implementation details that needed to be dealt with and squeezing that into an hour 15 is a bit tight (and that aren't addressed even by some of the wrapper libraries that exist). Found out though that there's quite a bit of interest in using a templating engine outside of web applications, or often side by side with the HTML output generated by frameworks like MVC or WebForms. An extra fun part of this session was that this was my first session and when I went to set up I realized I forgot my mini-DVI to VGA adapter cable to plug into the projector in my room - 6 minutes before the session was about to start. So I ended up sprinting the half a mile + back to my room - and back at a full sprint. I managed to be back only a couple of minutes late, but when I started I was out of breath for the first 10 minutes or so, while trying to talk. Musta sounded a bit funny as I was trying to not gasp too much :-) Resources: Slides and Code Samples Westwind.RazorHosting GitHub Project Original RazorHosting Blog Post   Introduction to ASP.NET Web API for AJAX Applications Abstract:WebAPI provides a new framework for creating REST based APIs, but it can also act as a backend to typical AJAX operations. This session covers the core features of Web API as it relates to typical AJAX application development. We’ll cover content-negotiation, routing and a variety of output generation options as well as managing data updates from the client in the context of a small Single Page Application style Web app. Finally we’ll look at some of the extensibility features in WebAPI to customize and extend Web API in a number and useful useful ways. Comments:This session was a fill in for session slots not filled due MIA speakers stranded by Sandy. I had samples from my previous Web API article so decided to go ahead and put together a session from it. Given that I spent only a couple of hours preparing and putting slides together I was glad it turned out as it did - kind of just ran itself by way of the examples I guess as well as nice audience interactions and questions. Lots of interest - and also some confusion about when Web API makes sense. Both this session and the jQuery session ended up getting a ton of questions about when to use Web API vs. MVC, whether it would make sense to switch to Web API for all AJAX backend work etc. In my opinion there's no need to jump to Web API for existing applications that already have a good AJAX foundation. Web API is awesome for real externally consumed APIs and clearly defined application AJAX APIs. For typical application level AJAX calls, it's still a good idea, but ASP.NET MVC can serve most if not all of that functionality just as well. There's no need to abandon MVC (or even ASP.NET AJAX or third party AJAX backends) just to move to Web API. For new projects Web API probably makes good sense for isolation of AJAX calls, but it really depends on how the application is set up. In some cases sharing business logic between the HTML and AJAX interfaces with a single MVC API can be cleaner than creating two completely separate code paths to serve essentially the same business logic. Resources: Slides and Code Samples Sample Code on GitHub Introduction to ASP.NET Web API White Paper© Rick Strahl, West Wind Technologies, 2005-2012Posted in Conferences  ASP.NET   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Creating ASP.NET MVC Negotiated Content Results

  - by Rick Strahl

  In a recent ASP.NET MVC application I’m involved with, we had a late in the process request to handle Content Negotiation: Returning output based on the HTTP Accept header of the incoming HTTP request. This is standard behavior in ASP.NET Web API but ASP.NET MVC doesn’t support this functionality directly out of the box. Another reason this came up in discussion is last week’s announcements of ASP.NET vNext, which seems to indicate that ASP.NET Web API is not going to be ported to the cloud version of vNext, but rather be replaced by a combined version of MVC and Web API. While it’s not clear what new API features will show up in this new framework, it’s pretty clear that the ASP.NET MVC style syntax will be the new standard for all the new combined HTTP processing framework. Why negotiated Content? Content negotiation is one of the key features of Web API even though it’s such a relatively simple thing. But it’s also something that’s missing in MVC and once you get used to automatically having your content returned based on Accept headers it’s hard to go back to manually having to create separate methods for different output types as you’ve had to with Microsoft server technologies all along (yes, yes I know other frameworks – including my own – have done this for years but for in the box features this is relatively new from Web API). As a quick review,  Accept Header content negotiation works off the request’s HTTP Accept header:POST http://localhost/mydailydosha/Editable/NegotiateContent HTTP/1.1 Content-Type: application/json Accept: application/json Host: localhost Content-Length: 76 Pragma: no-cache { ElementId: "header", PageName: "TestPage", Text: "This is a nice header" } If I make this request I would expect to get back a JSON result based on my application/json Accept header. To request XML  I‘d just change the accept header:Accept: text/xml and now I’d expect the response to come back as XML. Now this only works with media types that the server can process. In my case here I need to handle JSON, XML, HTML (using Views) and Plain Text. HTML results might need more than just a data return – you also probably need to specify a View to render the data into either by specifying the view explicitly or by using some sort of convention that can automatically locate a view to match. Today ASP.NET MVC doesn’t support this sort of automatic content switching out of the box. Unfortunately, in my application scenario we have an application that started out primarily with an AJAX backend that was implemented with JSON only. So there are lots of JSON results like this:[Route("Customers")] public ActionResult GetCustomers() { return Json(repo.GetCustomers(),JsonRequestBehavior.AllowGet); } These work fine, but they are of course JSON specific. Then a couple of weeks ago, a requirement came in that an old desktop application needs to also consume this API and it has to use XML to do it because there’s no JSON parser available for it. Ooops – stuck with JSON in this case. While it would have been easy to add XML specific methods I figured it’s easier to add basic content negotiation. And that’s what I show in this post. Missteps – IResultFilter, IActionFilter My first attempt at this was to use IResultFilter or IActionFilter which look like they would be ideal to modify result content after it’s been generated using OnResultExecuted() or OnActionExecuted(). Filters are great because they can look globally at all controller methods or individual methods that are marked up with the Filter’s attribute. But it turns out these filters don’t work for raw POCO result values from Action methods. What we wanted to do for API calls is get back to using plain .NET types as results rather than result actions. That is  you write a method that doesn’t return an ActionResult, but a standard .NET type like this:public Customer UpdateCustomer(Customer cust) { … do stuff to customer :-) return cust; } Unfortunately both OnResultExecuted and OnActionExecuted receive an MVC ContentResult instance from the POCO object. MVC basically takes any non-ActionResult return value and turns it into a ContentResult by converting the value using .ToString(). Ugh. The ContentResult itself doesn’t contain the original value, which is lost AFAIK with no way to retrieve it. So there’s no way to access the raw customer object in the example above. Bummer. Creating a NegotiatedResult This leaves mucking around with custom ActionResults. ActionResults are MVC’s standard way to return action method results – you basically specify that you would like to render your result in a specific format. Common ActionResults are ViewResults (ie. View(vn,model)), JsonResult, RedirectResult etc. They work and are fairly effective and work fairly well for testing as well as it’s the ‘standard’ interface to return results from actions. The problem with the this is mainly that you’re explicitly saying that you want a specific result output type. This works well for many things, but sometimes you do want your result to be negotiated. My first crack at this solution here is to create a simple ActionResult subclass that looks at the Accept header and based on that writes the output. I need to support JSON and XML content and HTML as well as text – so effectively 4 media types: application/json, text/xml, text/html and text/plain. Everything else is passed through as ContentResult – which effecively returns whatever .ToString() returns. Here’s what the NegotiatedResult usage looks like:public ActionResult GetCustomers() { return new NegotiatedResult(repo.GetCustomers()); } public ActionResult GetCustomer(int id) { return new NegotiatedResult("Show", repo.GetCustomer(id)); } There are two overloads of this method – one that returns just the raw result value and a second version that accepts an optional view name. The second version returns the Razor view specified only if text/html is requested – otherwise the raw data is returned. This is useful in applications where you have an HTML front end that can also double as an API interface endpoint that’s using the same model data you send to the View. For the application I mentioned above this was another actual use-case we needed to address so this was a welcome side effect of creating a custom ActionResult. There’s also an extension method that directly attaches a Negotiated() method to the controller using the same syntax:public ActionResult GetCustomers() { return this.Negotiated(repo.GetCustomers()); } public ActionResult GetCustomer(int id) { return this.Negotiated("Show",repo.GetCustomer(id)); } Using either of these mechanisms now allows you to return JSON, XML, HTML or plain text results depending on the Accept header sent. Send application/json you get just the Customer JSON data. Ditto for text/xml and XML data. Pass text/html for the Accept header and the "Show.cshtml" Razor view is rendered passing the result model data producing final HTML output. While this isn’t as clean as passing just POCO objects back as I had intended originally, this approach fits better with how MVC action methods are intended to be used and we get the bonus of being able to specify a View to render (optionally) for HTML. How does it work An ActionResult implementation is pretty straightforward. You inherit from ActionResult and implement the ExecuteResult method to send your output to the ASP.NET output stream. ActionFilters are an easy way to effectively do post processing on ASP.NET MVC controller actions just before the content is sent to the output stream, assuming your specific action result was used. Here’s the full code to the NegotiatedResult class (you can also check it out on GitHub):/// <summary> /// Returns a content negotiated result based on the Accept header. /// Minimal implementation that works with JSON and XML content, /// can also optionally return a view with HTML. /// </summary> /// <example> /// // model data only /// public ActionResult GetCustomers() /// { /// return new NegotiatedResult(repo.Customers.OrderBy( c=> c.Company) ) /// } /// // optional view for HTML /// public ActionResult GetCustomers() /// { /// return new NegotiatedResult("List", repo.Customers.OrderBy( c=> c.Company) ) /// } /// </example> public class NegotiatedResult : ActionResult { /// <summary> /// Data stored to be 'serialized'. Public /// so it's potentially accessible in filters. /// </summary> public object Data { get; set; } /// <summary> /// Optional name of the HTML view to be rendered /// for HTML responses /// </summary> public string ViewName { get; set; } public static bool FormatOutput { get; set; } static NegotiatedResult() { FormatOutput = HttpContext.Current.IsDebuggingEnabled; } /// <summary> /// Pass in data to serialize /// </summary> /// <param name="data">Data to serialize</param> public NegotiatedResult(object data) { Data = data; } /// <summary> /// Pass in data and an optional view for HTML views /// </summary> /// <param name="data"></param> /// <param name="viewName"></param> public NegotiatedResult(string viewName, object data) { Data = data; ViewName = viewName; } public override void ExecuteResult(ControllerContext context) { if (context == null) throw new ArgumentNullException("context"); HttpResponseBase response = context.HttpContext.Response; HttpRequestBase request = context.HttpContext.Request; // Look for specific content types if (request.AcceptTypes.Contains("text/html")) { response.ContentType = "text/html"; if (!string.IsNullOrEmpty(ViewName)) { var viewData = context.Controller.ViewData; viewData.Model = Data; var viewResult = new ViewResult { ViewName = ViewName, MasterName = null, ViewData = viewData, TempData = context.Controller.TempData, ViewEngineCollection = ((Controller)context.Controller).ViewEngineCollection }; viewResult.ExecuteResult(context.Controller.ControllerContext); } else response.Write(Data); } else if (request.AcceptTypes.Contains("text/plain")) { response.ContentType = "text/plain"; response.Write(Data); } else if (request.AcceptTypes.Contains("application/json")) { using (JsonTextWriter writer = new JsonTextWriter(response.Output)) { var settings = new JsonSerializerSettings(); if (FormatOutput) settings.Formatting = Newtonsoft.Json.Formatting.Indented; JsonSerializer serializer = JsonSerializer.Create(settings); serializer.Serialize(writer, Data); writer.Flush(); } } else if (request.AcceptTypes.Contains("text/xml")) { response.ContentType = "text/xml"; if (Data != null) { using (var writer = new XmlTextWriter(response.OutputStream, new UTF8Encoding())) { if (FormatOutput) writer.Formatting = System.Xml.Formatting.Indented; XmlSerializer serializer = new XmlSerializer(Data.GetType()); serializer.Serialize(writer, Data); writer.Flush(); } } } else { // just write data as a plain string response.Write(Data); } } } /// <summary> /// Extends Controller with Negotiated() ActionResult that does /// basic content negotiation based on the Accept header. /// </summary> public static class NegotiatedResultExtensions { /// <summary> /// Return content-negotiated content of the data based on Accept header. /// Supports: /// application/json - using JSON.NET /// text/xml - Xml as XmlSerializer XML /// text/html - as text, or an optional View /// text/plain - as text /// </summary> /// <param name="controller"></param> /// <param name="data">Data to return</param> /// <returns>serialized data</returns> /// <example> /// public ActionResult GetCustomers() /// { /// return this.Negotiated( repo.Customers.OrderBy( c=> c.Company) ) /// } /// </example> public static NegotiatedResult Negotiated(this Controller controller, object data) { return new NegotiatedResult(data); } /// <summary> /// Return content-negotiated content of the data based on Accept header. /// Supports: /// application/json - using JSON.NET /// text/xml - Xml as XmlSerializer XML /// text/html - as text, or an optional View /// text/plain - as text /// </summary> /// <param name="controller"></param> /// <param name="viewName">Name of the View to when Accept is text/html</param> /// /// <param name="data">Data to return</param> /// <returns>serialized data</returns> /// <example> /// public ActionResult GetCustomers() /// { /// return this.Negotiated("List", repo.Customers.OrderBy( c=> c.Company) ) /// } /// </example> public static NegotiatedResult Negotiated(this Controller controller, string viewName, object data) { return new NegotiatedResult(viewName, data); } } Output Generation – JSON and XML Generating output for XML and JSON is simple – you use the desired serializer and off you go. Using XmlSerializer and JSON.NET it’s just a handful of lines each to generate serialized output directly into the HTTP output stream. Please note this implementation uses JSON.NET for its JSON generation rather than the default JavaScriptSerializer that MVC uses which I feel is an additional bonus to implementing this custom action. I’d already been using a custom JsonNetResult class previously, but now this is just rolled into this custom ActionResult. Just keep in mind that JSON.NET outputs slightly different JSON for certain things like collections for example, so behavior may change. One addition to this implementation might be a flag to allow switching the JSON serializer. Html View Generation Html View generation actually turned out to be easier than anticipated. Initially I used my generic ASP.NET ViewRenderer Class that can render MVC views from any ASP.NET application. However it turns out since we are executing inside of an active MVC request there’s an easier way: We can simply create a custom ViewResult and populate its members and then execute it. The code in text/html handling code that renders the view is simply this:response.ContentType = "text/html"; if (!string.IsNullOrEmpty(ViewName)) { var viewData = context.Controller.ViewData; viewData.Model = Data; var viewResult = new ViewResult { ViewName = ViewName, MasterName = null, ViewData = viewData, TempData = context.Controller.TempData, ViewEngineCollection = ((Controller)context.Controller).ViewEngineCollection }; viewResult.ExecuteResult(context.Controller.ControllerContext); } else response.Write(Data); which is a neat and easy way to render a Razor view assuming you have an active controller that’s ready for rendering. Sweet – dependency removed which makes this class self-contained without any external dependencies other than JSON.NET. Summary While this isn’t exactly a new topic, it’s the first time I’ve actually delved into this with MVC. I’ve been doing content negotiation with Web API and prior to that with my REST library. This is the first time it’s come up as an issue in MVC. But as I have worked through this I find that having a way to specify both HTML Views *and* JSON and XML results from a single controller certainly is appealing to me in many situations as we are in this particular application returning identical data models for each of these operations. Rendering content negotiated views is something that I hope ASP.NET vNext will provide natively in the combined MVC and WebAPI model, but we’ll see how this actually will be implemented. In the meantime having a custom ActionResult that provides this functionality is a workable and easily adaptable way of handling this going forward. Whatever ends up happening in ASP.NET vNext the abstraction can probably be changed to support the native features of the future. Anyway I hope some of you found this useful if not for direct integration then as insight into some of the rendering logic that MVC uses to get output into the HTTP stream… Related Resources Latest Version of NegotiatedResult.cs on GitHub Understanding Action Controllers Rendering ASP.NET Views To String© Rick Strahl, West Wind Technologies, 2005-2014Posted in MVC  ASP.NET  HTTP   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• HP Network Utility Error

  - by William Ricci

  Using the HP Network Utility to team 2 ports on Windows 2008 R2 Standard results in this error:----- An error occurred when making a call into the operating system. Happens on either of two cards that are installed. This happened before and after upgrading to PSP 9.10. Uninstalled the HP Network Configuration Utility and re-installed version 10.65.0.6. Updated NIC drivers. NC382i DP - HP Broadcom 1Gb Multifunction Driver 7.4.23.0 (from 6.2.9.0) NC365T - Intel E1R 11.14.80.0 (from 11.14.49.0)

  Read the article

• Windows 8 asks DotNet 3.5 to install DotNet 3.5

  - by William.Ebe

  While trying to install some tools in Windows 8, it showed me a nice message saying it requires DotNet framework. Well, it's fine. But the bad part is I have offline installers for v2.0 and v3.5. While I'm trying to install those installers it shows me the same message as it shows above. I can't consider the web installer, because I don't want to download around 100MB. The file I have works fine for other versions like Windows 7 or XP. Any fixes?

  Read the article

• How do you handle authentication across domains?

  - by William Ratcliff

  I'm trying to save users of our services from having to have multiple accounts/passwords. I'm in a large organization and there's one group that handles part of user authentication for users who are from outside the facility (primarily for administrative functions). They store a secure cookie to establish a session and communicate only via HTTPS via the browser. Sessions expire either through: 1) explicit logout of the user 2) Inactivity 3) Browser closes My team is trying to write a web application to help users analyze data that they've taken (or are currently taking) while at our facility. We need to determine if a user is 1) authenticated 2) Some identifier for that user so we can store state for them (what analysis they are working on, etc.) So, the problem is how do you authenticate across domains (the authentication server for the other application lives in a border region between public and private--we will live in the public region). We have come up with some scenarios and I'd like advice about what is best practice, or if there is one we haven't considered. Let's start with the case where the user is authenticated with the authentication server. 1) The authentication server leaves a public cookie in the browser with their primary key for a user. If this is deemed sensitive, they encrypt it on their server and we have the key to decrypt it on our server. When the user visits our site, we check for this public cookie. We extract the user_id and use a public api for the authentication server to request if the user is logged in. If they are, they send us a response with: response={ userid :we can then map this to our own user ids. If necessary, we can request additional information such as email-address/display name once (to notify them if long running jobs are done, or to share results with other people, like with google_docs). account_is_active:Make sure that the account is still valid session_is_active: Is their session still active? If we query this for a valid user, this will have a side effect that we will reset the last_time_session_activated value and thus prolong their session with the authentication server last_time_session_activated: let us know how much time they have left ip_address_session_started_from:make sure the person at our site is coming from the same ip as they started the session at } Given this response, we either accept them as authenticated and move on with our app, or redirect them to the login page for the authentication server (question: if we give an encrypted portion of the response (signed by us) with the page to redirect them to, do we open any gaping security holes in the authentication server)? The flaw that we've found with this is that if the user visits evilsite.com and they look at the session cookie and send a query to the public api of the authentication server, they can keep the session alive and if our original user leaves the machine without logging out, then the next user will be able to access their session (this was possible before, but having the session alive eternally makes this worse). 2) The authentication server redirects all requests made to our domain to us and we send responses back through them to the user. Essentially, they act as a proxy. The advantage of this is that we can handshake with the authentication server, so it's safe to be trusted with the email address/name of the user and they don't have to reenter it So, if the user tries to go to: authentication_site/mysite_page1 they are redirected to mysite. Which would you choose, or is there a better way? The goal is to minimize the "Yet Another Password/Yet another username" problem... Thanks!!!!

  Read the article

• Call 'script' command and exit it from within a bash script

  - by William Jamieson

  I'm using the linux 'script' command http://www.linuxcommand.org/man_pages/script1.html to log all input and output in an interactive bash script. At the moment I have to call the script command, then run my bash script, then exit. I want to run the script and exit commands from within the actual bash script itself. How can I do this? I've tried script -a but that doesn't work for interactive scripts. Any assistance would be greatly appreciated.

  Read the article

• Shutdown in background - PHP

  - by William

  I'm trying to shutdown an Ubuntu machine from PHP and am running into an issue if I want to delay the shutdown. The PHP line I'm using is: exec("sudo shutdown -h +5 &", $output); Where 5 is however many minutes in the future I want to shutdown. My problem is that this won't background and Apache hangs until either the machine is shutdown or someone else cancels the shutdown. shell_exec() has the same result. Is there another way to do this that will return immediately?

  Read the article

• Windows Server 2008R2 Virtual Lab Activation strategies?

  - by William Hilsum

  I have a ESXi server that I use for testing, however, I am often needing to create additional Windows Server virtual machines. Typically, if I do not need a VM for more than 30 days, I simply do not activate. However, I have been doing a lot of HA/DRS testing recently and I have had a few servers up for more than this time. I have a MSDN account with Microsoft and have already received extra keys for Windows Server 2008 R2. I am doing nothing illegal and I am sure if I asked, they would issue more - but, I do not want to tempt fate! I have got 3 different "activated" windows snapshots I can get to at any time. If I try to clone these machines, I get the usual "did you copy or move them VM" message. If I choose copy, as far as I can see, it changes the BIOS ID and NIC MACs which is enough to disable activation. If I choose move, it keeps the activation fine (obviously, I know to change the NIC MAC - I believe I can leave the BIOS ID without problems). However, either of these options keeps the same SID code for the computer and user accounts. After the activation period has expired, as far as I can see, all that happens is optional updates do not work - it seems that the normal updates work fine. Based on this, as you can easily get in to Windows when not activated without any sort of workaround, I was wondering if it is ok just to leave a machine un activated? (However, I obviously would prefer if it was activated!) Alternatively, how dangerous is it run multiple machines on a non domain environment with the same SID? I am just interested to know if anyone can recommend a strategy for me? I have only found one solution that deals with bypassing activation - I am not interested in doing anything remotely dodgy... at a stretch, I am happy to rearm (I have never needed to keep a server past 100 days), but, I would rather have a proper strategy in place.

  Read the article

• Apache restart on Ubuntu - error “could not bind to address 0.0.0.0:80”

  - by william

  I'm a n00b - trying to get apache2 set up on Ubuntu 9.10 (Karmic Koala) on Rackspace Cloud. I have set up/configured OpenSSL and installed Apache, but Apache won't start. I assume its a misconfiguration in my /etc/apache2/sites-available/ssl or /etc/apache2/sites-available/default files) When I try to restart apache using the command: sudo /etc/init.d/apache2 restart I get the following error message: [error] (EAI 2)Name or service not known: Could not resolve host name *.80 -- ignoring! [error] (EAI 2)Name or service not known: Could not resolve host name *.80 -- ignoring! (98)Address already in use: make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down Unable to open logs ...fail! For my /etc/apache2/sites-available/ssl I have used a virtual host of *:443. For my /etc/apache2/sites-available/default i have used a virtual host of *:80

  Read the article

• Everything Windows Explorer does hangs up t some time or another

  - by William Barnes

  Yes this is a duplicate of something I have tried to ask in the past. I think I am posting wrong since my first question was deleted OK I ran SCANNOW nd it came back with no problems. I booted in Safe mode and windows evplorer worked OK. I am not sure what that proves. I also ran AUTRUNS and disabled everything that you said, but it still dies. I read someplace that it could be a service program, but I can't find that link anymore. Something about shutting off all non-windows SP's and then start adding back SP's until it quits. The problem is that sometimes it will work, but most of the time it does not. Makes saving or retrieving anything impossible. SAVEAS hangs up, my Garmin Map updater hangs up etc.. I was having this problem before installing Garmin so I am reasonably sure it is not the problem HELP PLEASE, I don't have many brain cells left and can't afford to lose more.

  Read the article

• Linking JIRA and Confluence

  - by William

  I am trying to create a trust relationship between JIRA and Confluence so that I can insert JIRA issues into Confluence documents. However, in JIRA, when I try to initiate the relationship, I receive the error: "Unable to auto-configure a Consumer as the remote Consumer-Info count not be found.". When I attempt to create the relationship from Confluence, I receive this error: "Unable to auto-configure a Consumer as the remote Consumer-Info could not be found." What am I doing wrong here?

  Read the article

• Kickstarting VMWare ESX 4.1 (Error: No NIC with name bootif)

  - by William

  I'm having an issue kickstarting an installation of VMWaare ESX Classic 4.1. I've stripped down my kickstart a bit to just: accepteula keyboard us auth clearpart --firstdisk --overwritevmfs url --url=10.16.0.1/cblr/ks_mirror/esx-classic-4.1.0-260247 rootpw --iscrypted $1$zZJa3g7g$mD8d.6QgbPku1QovQTAps/ timezone 'US/Pacific' network --addvmportgroup=true --device=vmnic0 --bootproto=dhcp part '/boot' --fstype=ext3 --size=1100 --onfirstdisk part 'none' --fstype=vmkcore --size=110 --onfirstdisk part 'datastore1' --fstype=vmfs3 --size=8920 --grow --onfirstdisk virtualdisk 'esxconsole' --size=7920 --onvmfs='datastore1' part 'swap' --fstype=swap --size=916 --onvirtualdisk='esxconsole' part '/var/log' --fstype=ext3 --size=2000 --onvirtualdisk='esxconsole' part '/' --fstype=ext3 --size=5000 --grow --onvirtualdisk='esxconsole' %post --interpreter=bash However, when I attempt to use this kickstart during a PXE install with no additional kernel options, I get the following error: There was a problem with the Network Device specified on the command line. Error: No NIC found with name bootif If I comment out the network line in the kickstart, the error changes to: There was a problem with the Network Device specified on the command line. Error: No NIC found with name eth0 How can I fix this? Thanks.

  Read the article

• With Apache, is it possible to generate a directory listing for a non-folder URL?

  - by William Denniss

  Apache allows you to create a directory list (when configured) if you visit a folder with no index.html. What I want to know is, is it possible to get that same list but at a different URL? I'm already using index.html and want to keep it that way. i.e., this is what I'm looking for: http://example.com/blar/ - loads my index.html page (don't want this to change) http://example.com/blar/directory_list (I want this url to render the apache directory list instead)

  Read the article

• How do I install a newer version of GTK in Ubuntu without replacing the current one?

  - by William Friesen

  I am trying to compile file-roller from git, but running autogen.sh gives me this error configure: error: Package requirements (gtk+-3.0 >= 2.91.1) were not met: No package 'gtk+-3.0' found Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables GTK_CFLAGS and GTK_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. I am running Ubuntu Maverick and don't wish to completely replace my current version of gtk, glib, etc. I have tried to compile GTK using the --prefix argument of autogen.sh, but this gives me a similar error about my version of glib. How can I successfully compile file-roller using these new libraries without borking my install?

  Read the article

• Remote desktop use two out of four monitors

  - by William Gant

  I've recently upgraded my home workstation and now have four monitors on it. I work remotely most of the time and need some way to get remote desktop onto only two of those four monitors. The top two monitors (monitors 4 & 3, going from left to right) each have a maximum resolution of 1680x1050. The bottom two monitors (1 & 2) each have a maximum resolution of 1920x1080. In my .rpd file for this remote desktop connection, I have the following keys (I've clipped it for brevity) screen mode id:i:2 use multimon:i:1 desktopwidth:i:1920 desktopheight:i:2130 session bpp:i:32 winposstr:s:0,1,3,75,1655,675 Previously I was able to get away with just doing "mstsc /span" when I had only two monitors, but that isn't working now (and isn't desirable). I'd like for the new setup to only use two of my monitors. I don't really care which two. How do I alter the .rdp file to accomplish this?

  Read the article

• Managing DHCP with Cobbler and multiple NICs

  - by William

  Hi, I'm trying to setup Cobbler for PXE booting and I want it to also manage DHCP. The issue is I only want one of the two available NICs to manage DHCP. Is there a way to specify which NIC Cobbler will use for DHCP? Thank you.

  Read the article

• Postfix dynamic smtp_helo_name

  - by William

  I have a mail server that relays e-mails for two different domains. I want the smtp_helo_name to be different based on the domain. I'm assuming there is no way to do this via checking the mail headers, so I was wondering if there was a way to do it by sending mail for one domain to one IP, and mail for the other to another. I tried modified master.cf to do this: localhost:smtp inet n - n - - smtpd ip1:smtp inet n - n - - smtpd ip2:smtp inet n - n - - smtpd -o myhostnamee=example2.com And setting smtp_helo_name to $myhostname in main.cf I also tried doing -o smtp_helo_name instead, neither work. Any suggestions would be great. Thanks

  Read the article

• Does the mysql Client API Library version have to match the installed MySQL/Percona server version?

  - by William Jamieson

  I'm running Scientific Linux 6.3 (binary compaible with Redhat/CentOS/etc..) as a LAMP stack. I've installed Percona server and client v5.5 from the Percona yum repository. However when I run phpinfo() I notice that under the MySQL and mysqli sections, it lists the Client API Library version as 5.1.66, and not 5.5x. I'm guessing these need to match, at least to major versions, and I have no idea what the possible consequences of such a mismatch could be. Do I need to revert to Percona server and client v5.1? This is for a production environment so it needs to be right. I'd appreciate any input or experience people could offer. I'm running Scientific Linux 6.3 (binary compaible with Redhat/CentOS/etc..) as a LAMP stack. I've installed Percona server and client v5.5 from the Percona yum repository. However when I run phpinfo() I notice that under the MySQL and mysqli sections, it lists the Client API Library version as 5.1.66, and not 5.5x. I'm guessing these need to match, at least to major versions, and I have no idea what the possible consequences of such a mismatch could be. Do I need to revert to Percona server and client v5.1? This is for a production environment so it needs to be right. I'd appreciate any input or experience people could offer. (Note I will also be cross posting this on the Percona forums)

  Read the article

• Eclipse Helios on OS X Snow Leopard crashes frequently when editing certain PHP files

  - by William

  I use Eclipse Helios (Eclipse Platform: 3.6.0.I20100608-0911, Eclipse IDE for PHP Developers: 1.3.0.20100617-0520) all the time on OS X (Snow Leopard), and it seems I only run into trouble whenever I'm editing a PHP file that's part of the WordPress blogging framework. When I move my cursor to a variable or function name, that often triggers the beach ball of death. I suspect Eclipse is trying to look up that variable/function and for some reason that causes an endless loop. Sometimes it's not just variables or functions. Just today I was trying to replace all occurrences of a quoted string. Every time I clicked "Replace All", the program would freeze immediately after the string was replaced and the text cursor was moved to the replaced position. I think the moving of the text cursor is important, because I got the same result when I searched for the string (thus moving the cursor), but NOT when I searched for a nonexistent string. I tried disabling everything in my preferences related to marked occurrences, hovering, code assistance, etc. Nothing helps. I use Eclipse for all my projects, and I find that it's only WordPress projects where this happens. Here's my eclipse.ini file: -startup ../../../plugins/org.eclipse.equinox.launcher_1.1.0.v20100507.jar --launcher.library ../../../plugins/org.eclipse.equinox.launcher.cocoa.macosx_1.1.0.v20100503 -product org.eclipse.epp.package.php.product --launcher.defaultAction openFile -showsplash org.eclipse.platform --launcher.XXMaxPermSize 512m --launcher.defaultAction openFile -vmargs -Dosgi.requiredJavaVersion=1.5 -XstartOnFirstThread -Dorg.eclipse.swt.internal.carbon.smallFonts -XX:PermSize=128m -XX:MaxPermSize=128m -XX:MaxGCPauseMillis=10 -XX:MaxHeapFreeRatio=70 -XX:+UseConcMarkSweepGC -XX:+CMSIncrementalMode -XX:+CMSIncrementalPacing -XX:CompileThreshold=5 -Xms128m -Xmx512m -Xss2m -Xdock:icon=../Resources/Eclipse.icns -XstartOnFirstThread -Dorg.eclipse.swt.internal.carbon.smallFonts -framework ../../../plugins/org.eclipse.osgi.services_3.2.100.v20100503.jar I have 4GB of RAM, so I don't know if the problem is I'm underutilizing my resources. Here's what I see over and over in the error log: !ENTRY org.eclipse.jface 2 0 2011-01-16 16:26:21.533 !MESSAGE Keybinding conflicts occurred. They may interfere with normal accelerator operation. !SUBENTRY 1 org.eclipse.jface 2 0 2011-01-16 16:26:21.533 !MESSAGE A conflict occurred for ALT+COMMAND+Q P: Binding(ALT+COMMAND+Q P, ParameterizedCommand(Command(org.eclipse.ui.views.showView,Show View, Shows a particular view, Category(org.eclipse.ui.category.views,Views,Commands for opening views,true), org.eclipse.ui.handlers.ShowViewHandler@2a46d1, [Lorg.eclipse.ui.internal.commands.Parameter;@18f50c2,,true), [Lorg.eclipse.core.commands.Parameterization;@1ff1855), org.eclipse.ui.defaultAcceleratorConfiguration, org.eclipse.ui.contexts.window,,cocoa,system) Binding(ALT+COMMAND+Q P, ParameterizedCommand(Command(org.eclipse.ui.views.showView,Show View, Shows a particular view, Category(org.eclipse.ui.category.views,Views,Commands for opening views,true), org.eclipse.ui.handlers.ShowViewHandler@2a46d1, [Lorg.eclipse.ui.internal.commands.Parameter;@18f50c2,,true), [Lorg.eclipse.core.commands.Parameterization;@96b40c), org.eclipse.ui.defaultAcceleratorConfiguration, org.eclipse.ui.contexts.window,,cocoa,system) !ENTRY org.eclipse.core.net 1 0 2011-01-16 16:26:22.217 !MESSAGE System property http.proxyHost has been set to 127.0.0.1 by an external source. This value will be overwritten using the values from the preferences !ENTRY org.eclipse.core.net 1 0 2011-01-16 16:26:22.217 !MESSAGE System property http.proxyPort has been set to 8888 by an external source. This value will be overwritten using the values from the preferences !ENTRY org.eclipse.core.net 1 0 2011-01-16 16:26:22.218 !MESSAGE System property https.proxyHost has been set to 127.0.0.1 by an external source. This value will be overwritten using the values from the preferences !ENTRY org.eclipse.core.net 1 0 2011-01-16 16:26:22.219 !MESSAGE System property https.proxyPort has been set to 8888 by an external source. This value will be overwritten using the values from the preferences I did some experimenting with the particular script that's giving me trouble. It's a hybrid of HTML and PHP, so Eclipse has to do both HTML and PHP validation. I wondered if the HTML validation had something to do with it, so I created a new file, copied the contents over, and messed with the doctype element. I found that if I replaced the well-formed XHTML 1.0 Strict doctype element with a generic doctype (as such: <!DOCTYPE html>), then I did not crash the program just by moving the cursor around. I set all HTML validation rules to "Ignore", but it still didn't solve my problems. For now, I'm just going to echo the doctype using PHP instead of entering it literally. That seems to prevent crashes. I notice that when I move the cursor around the document, Eclipse displays the "xpath" to my current location at the bottom of the screen. Sometimes there's a delay while it figures out my current path. Perhaps when it's validating against the Strict doctype, it has problems quickly calculating the xpath as I move the cursor around? Maybe it has a stack overflow that causes it to crash.

  Read the article

• How to use iSCSI inside HyperV VM?

  - by William

  I have 2 Dell R710 servers (intended to set up HyperV cluster) and a MD3000i SAN set up: Server1/Server2: NIC 1: connected to company LAN NIC 2: crossover to the other server's NIC 2 NIC 3: crossover to iSCSI port of SAN controller 1 NIC 4: crossover to iSCSI port of SAN controller 2 I have both servers setup as diskless servers with iSCSI boot from SAN without problem. But how can I access iSCSI from within the VM such that I can set up clustering inbetween the VMs? I can ping from the host to the SAN but found that NIC3/4 cannot be used for virtual network in HyperV? What am I doing wrong?

  Read the article

• How do you setup FTP with IIS Manager Users in an NLB environment with shared IIS configs?

  - by William Jens

  I've setup a 2 node NLB cluster and used the following to share IIS configs between them. http://blogs.technet.com/b/meamcs/archive/2012/05/30/configuring-iis-7-5-shared-configuration.aspx The IIS configs and content is located on a network share via a UNC path. This works - updating IIS settings on one node, is visible in another node and my website works on the individual nodes and the cluster as whole. I'm able to setup an FTP site and successfully connect with my Windows login. However, I want to use IIS Manager Authentication as defined in: http://www.iis.net/learn/publish/using-the-ftp-service/configure-ftp-with-iis-manager-authentication-in-iis-7 I've tried using "Network Service" with the FTP COM object as well as a dedicated user account that exists on all three hosts, but every time I try to login with an IIS user I get something like the following: IISWMSVC_AUTHENTICATION_UNABLE_TO_READ_CONFIG An unexpected error occurred while retrieving the authentication information. Exception:System.Runtime.InteropServices.COMException (0x8007052E): Filename: Error: at Microsoft.Web.Administration.Interop.AppHostWritableAdminManager.GetAdminSection(String bstrSectionName, String bstrSectionPath) at Microsoft.Web.Administration.Configuration.GetSectionInternal(ConfigurationSection section, String sectionPath, String locationPath) at Microsoft.Web.Management.Server.ConfigurationAuthenticationProvider.GetSection(ServerManager serverManager) Process:dllhost User=NT AUTHORITY\NETWORK SERVICE Can anyone point me in the right direction here?

  Read the article

• Amazon mount EBS

  - by William

  I'm trying to mount /vol to a EBS volume on an Amazon EC2 instance. I'm formatting the device to xfs, adding "/dev/sdh /vol xfs noatime 0 0" to my /etc/fstab file, making the /vol dir and mounting it and whenever I try to do anything with that volume (create a file in /vol, cd, ls, anything) or I try to run df the server just freezes. Anyone have any idea what this might be? It's driving me crazy. Edit: It seems to freeze after I mount, has nothing to do with doing any commands to the volume it's self.

  Read the article

< Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >