Search Results

Search found 14837 results on 594 pages for 'duplicate ip'.

Page 100/594 | < Previous Page | 96 97 98 99 100 101 102 103 104 105 106 107  | Next Page >

  • Very long (>300s) request processing time on Apache Server serving static content from particular IP

    - by Ron Bieber
    We are running an Apache 2.2 server for a very large web site. Over the past few months we have been having some users reporting slow response times, while others (including our resources, both on the internal network and our home networks) do not see any degradation in performance. After a ton of investigation, we finally found a "Deny from none" statement in our configuration that was causing reverse DNS lookups (which were timing out) that solved the bulk of our issues, but we still have some customers that we are seeing in the Apache logs (using %D in the log format) with request processing times of 300s for images, css, javascript and other static content. We've checked all Deny / Allow statements for reoccurrence of "none", as well as all other things we know of that would cause reverse DNS lookups (such as using "REMOTE_HOST" in rewrite rules, using %a instead of %h in our log format configuration) as well as verified that HostnameLookups is set to "Off". As an aside, we've also validated that reverse DNS lookups for folks having this problem do not time out - so I'm fairly certain DNS is not an issue in this case. I've run out of ideas. Are there any Apache configuration scenarios that someone can point me to that I might be missing that would cause request times for static content to take so long only for certain users? Thank you in advance.

    Read the article

  • nginx 2 symfony2 web application, one ip no domain

    - by Krzysztof Koch
    I have irritating with nginx. I set up in /usr/share/nginx/www/firstapp one application and in /usr/share/nginx/www/secondapp. in my default conf i setup that in / root localization i want first app: when write 9.9.9.9 in browser show me first app, and when i write 9.9.9.9/makeup, there not show me seccond app. Why first app displays me good, and seccondapp cannot? Please help me. Sorry for quality here pasterbin code: enter link description here server { listen 80; server_name localhost; root /usr/share/nginx/www/firstapp/web; access_log /var/log/nginx/$host.access.log; error_log /var/log/nginx/error.log error; # strip app.php/ prefix if it is present rewrite ^/app\.php/?(.*)$ /$1 permanent; location / { root /usr/share/nginx/www/firstapp/web/; index app.php; try_files $uri @rewriteapp; } location /makeup/ { alias /usr/share/nginx/www/seccondapp/web/; index app.php; try_files $uri @rewriteapp; } location @rewriteapp { rewrite ^(.*)$ /app.php/$1 last; } # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 location ~ ^/(app|app_dev)\.php(/|$) { #fastcgi_pass 127.0.0.1:9000; fastcgi_pass unix:/var/lib/php5-fpm/www.sock; fastcgi_split_path_info ^(.+\.php)(/.*)$; include fastcgi_params; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param HTTPS off; #fastcgi_param SERVER_PORT 80; }

    Read the article

  • Debian 6 Internet connection sharing aka IP masquerade not working

    - by Rautamiekka
    The problem: the computers [Xbox 360 and a Kubuntu 12.04.1 laptop] can't access Internet through a recently-installed desktopless Debian 6 laptop (which is wirelessly connected to a WLAN station) but addresses are successfully given by dnsmasq. The attempts: 1.1) /etc/dnsmaq.conf conffed according to http://wiki.debian.org/HowTo/dnsmasq: add lines interface=eth0 dhcp-range=192.168.0.50,192.168.0.150,255.255.255.0,12h 1.2) Follow http://www.cyberciti.biz/faq/rhel-fedora-linux-internet-connection-sharing-howto/ and use their script to setup iptables. 2) Follow the Ubuntu Internet Gateway Method (iptables) at https://help.ubuntu.com/community/Internet/ConnectionSharing recommended and which worked at Share internet in Linux. The Debian laptop was rebooted many times and between each attempt, with and without the script auto-executing via /etc/rc.local. While adding the iptables-restore command to that file I disabled the script.

    Read the article

  • Unable to start sql service when TCP/IP is enabled under SSCM - SS Network Configuration

    - by ebel
    I get error 10048. and this in event history: The SQL server service terminated with server-specific error. Only one usage of each socket (protcol/network address/port) is normall permitted. Any idea howto fix this ? Port set is the default 1433... If this is turned off, which is default of course, SQL service starts like a champ. I have done this config many times on other servers with no problem.

    Read the article

  • Multiple interfaces to one IP address?

    - by Delan Azabani
    At present, I have: a Netgear router with DHCP off at 192.168.0.1 my computer eth0 at 192.168.0.2 wlan0 at 192.168.0.2 The wlan0 interface always connects to the router, while the eth0 interface connects to other computers with crossover and acts as a dnsmasq DHCP server for network boot and installation. If I use the Gnome NetworkManager to enable both connections, that is, with wlan0 connected to the router/internet and eth0 to another computer, both as 192.168.0.2, I cannot access the internet while eth0 is connected. Why is this? How can I configure my computer to follow wlan0 for Internet usage, but use eth0 for itself (the latter is working but blocking wlan0).

    Read the article

  • InstantSSL's certificate no different than a self signed certificate under Nginx with an IP accessed address

    - by Absolute0
    I ordered an ssl certificate from InstantSSL and got the following pair of files: my_ip.ca-bundle, my_ip.crt I also previously generated my own key and crt files using openssl. I concatenated all the crt files: cat my_previously_generted.crt my_ip.ca_bundle my_ip.crt chained.crt And configured nginx as follows: server { ... listen 443; ssl on; ssl_certificate /home/dmsf/csr/chained.crt; ssl_certificate_key /home/dmsf/csr/csr.nopass.key; ... } I don't have a domain name as per the clients request. When I open the browser with https://my_ip chrome gives me this error: The site's security certificate is not trusted! You attempted to reach my_ip, but the server presented a certificate issued by an entity that is not trusted by your computer's operating system. This may mean that the server has generated its own security credentials, which Google Chrome cannot rely on for identity information, or an attacker may be trying to intercept your communications. You should not proceed, especially if you have never seen this warning before for this site.

    Read the article

  • vmware windows7 professional changing ip addresses

    - by chris hough
    is there a way to fix your windows 7 professional guest host os ipaddress so it does not change every time you startup? I am currently using NAT for networking and would like to remain using this networking method if possible. In older versions of windows this never used to be a problem in vmware so I am wondering if I am missing a setting in windows 7 professional or in vmware. thank you for your help, chris

    Read the article

  • SPF include: too many IP addresses

    - by sprezzatura
    I've hit a snag with SPF. The SPF record for my domain will contain four or five entries, plus it will contain: include:sgizmo.com The SPF record for sgizmo.com contains eleven entries! This, plus mine, is way over the maximum ten allowed by the RFC (and probably by most servers). I realize that there has to be a limit in order to prevent DoS attacks. However, in the real world, it is probably not unreasonable for large companies to have many server addresses. Furthermore, must I know monitor my 'include:' counterparts for changes and additions? Must I check weekly, daily, to insure that some combination of changes doesn't suddenly put me over the top? It doesn't seem to me that SPF is suitable for prime time. Is there another way to do this?

    Read the article

  • How can I read pcap files in a friendly format?

    - by Tony
    a simple cat on the pcap file looks terrible: $cat tcp_dump.pcap ?ò????YVJ? JJ ?@@.?E<??@@ ?CA??qe?U?????h? .Ceh?YVJ?? JJ ?@@.?E<??@@ CA??qe?U?????z? .ChV?YVJ$?JJ ?@@.?E<-/@@A?CA??9????F???A&? .Ck??YVJgeJJ@@.??#3E<@3{n??9CA??P???F???<K? ??`.Ck??YVJgeBB ?@@.?E4-0@@AFCA??9????F?P????? .Ck???`?YVJ?""@@.??#3E?L@3?I??9CA??P???F????? ???.Ck?220-rly-da03.mx etc. I tried to make it prettier with: sudo tcpdump -ttttnnr tcp_dump.pcap reading from file tcp_dump.pcap, link-type EN10MB (Ethernet) 2009-07-09 20:57:40.819734 IP 67.23.28.65.49237 > 216.239.113.101.25: S 2535121895:2535121895(0) win 5840 <mss 1460,sackOK,timestamp 776168808 0,nop,wscale 5> 2009-07-09 20:57:43.819905 IP 67.23.28.65.49237 > 216.239.113.101.25: S 2535121895:2535121895(0) win 5840 <mss 1460,sackOK,timestamp 776169558 0,nop,wscale 5> 2009-07-09 20:57:47.248100 IP 67.23.28.65.42385 > 205.188.159.57.25: S 2644526720:2644526720(0) win 5840 <mss 1460,sackOK,timestamp 776170415 0,nop,wscale 5> 2009-07-09 20:57:47.288103 IP 205.188.159.57.25 > 67.23.28.65.42385: S 1358829769:1358829769(0) ack 2644526721 win 5792 <mss 1460,sackOK,timestamp 4292123488 776170415,nop,wscale 2> 2009-07-09 20:57:47.288103 IP 67.23.28.65.42385 > 205.188.159.57.25: . ack 1 win 183 <nop,nop,timestamp 776170425 4292123488> 2009-07-09 20:57:47.368107 IP 205.188.159.57.25 > 67.23.28.65.42385: P 1:481(480) ack 1 win 1448 <nop,nop,timestamp 4292123568 776170425> 2009-07-09 20:57:47.368107 IP 67.23.28.65.42385 > 205.188.159.57.25: . ack 481 win 216 <nop,nop,timestamp 776170445 4292123568> 2009-07-09 20:57:47.368107 IP 67.23.28.65.42385 > 205.188.159.57.25: P 1:18(17) ack 481 win 216 <nop,nop,timestamp 776170445 4292123568> 2009-07-09 20:57:47.404109 IP 205.188.159.57.25 > 67.23.28.65.42385: . ack 18 win 1448 <nop,nop,timestamp 4292123606 776170445> 2009-07-09 20:57:47.404109 IP 205.188.159.57.25 > 67.23.28.65.42385: P 481:536(55) ack 18 win 1448 <nop,nop,timestamp 4292123606 776170445> 2009-07-09 20:57:47.404109 IP 67.23.28.65.42385 > 205.188.159.57.25: P 18:44(26) ack 536 win 216 <nop,nop,timestamp 776170454 4292123606> 2009-07-09 20:57:47.444112 IP 205.188.159.57.25 > 67.23.28.65.42385: P 536:581(45) ack 44 win 1448 <nop,nop,timestamp 4292123644 776170454> 2009-07-09 20:57:47.484114 IP 67.23.28.65.42385 > 205.188.159.57.25: . ack 581 win 216 <nop,nop,timestamp 776170474 4292123644> 2009-07-09 20:57:47.616121 IP 67.23.28.65.42385 > 205.188.159.57.25: P 44:50(6) ack 581 win 216 <nop,nop,timestamp 776170507 4292123644> 2009-07-09 20:57:47.652123 IP 205.188.159.57.25 > 67.23.28.65.42385: P 581:589(8) ack 50 win 1448 <nop,nop,timestamp 4292123855 776170507> 2009-07-09 20:57:47.652123 IP 67.23.28.65.42385 > 205.188.159.57.25: . ack 589 win 216 <nop,nop,timestamp 776170516 4292123855> 2009-07-09 20:57:47.652123 IP 67.23.28.65.42385 > 205.188.159.57.25: P 50:56(6) ack 589 win 216 <nop,nop,timestamp 776170516 4292123855> 2009-07-09 20:57:47.652123 IP 67.23.28.65.42385 > 205.188.159.57.25: F 56:56(0) ack 589 win 216 <nop,nop,timestamp 776170516 4292123855> 2009-07-09 20:57:47.668124 IP 67.23.28.65.49239 > 216.239.113.101.25: S 2642380481:2642380481(0) win 5840 <mss 1460,sackOK,timestamp 776170520 0,nop,wscale 5> 2009-07-09 20:57:47.692126 IP 205.188.159.57.25 > 67.23.28.65.42385: P 589:618(29) ack 57 win 1448 <nop,nop,timestamp 4292123893 776170516> 2009-07-09 20:57:47.692126 IP 67.23.28.65.42385 > 205.188.159.57.25: R 2644526777:2644526777(0) win 0 2009-07-09 20:57:47.692126 IP 205.188.159.57.25 > 67.23.28.65.42385: F 618:618(0) ack 57 win 1448 <nop,nop,timestamp 4292123893 776170516> 2009-07-09 20:57:47.692126 IP 67.23.28.65.42385 > 205.188.159.57.25: R 2644526777:2644526777(0) win 0 Well...that is much prettier but it doesn't show the actual messages. I can actually extract more information just viewing the RAW file. What is the best ( and preferably easiest) way to just view all the contents of the pcap file? UPDATE Thanks to the responses below, I made some progress. Here is what it looks like now: tcpdump -qns 0 -A -r blah.pcap 20:57:47.368107 IP 205.188.159.57.25 > 67.23.28.65.42385: tcp 480 0x0000: 4500 0214 834c 4000 3306 f649 cdbc 9f39 [email protected] 0x0010: 4317 1c41 0019 a591 50fe 18ca 9da0 4681 C..A....P.....F. 0x0020: 8018 05a8 848f 0000 0101 080a ffd4 9bb0 ................ 0x0030: 2e43 6bb9 3232 302d 726c 792d 6461 3033 .Ck.220-rly-da03 0x0040: 2e6d 782e 616f 6c2e 636f 6d20 4553 4d54 .mx.aol.com.ESMT 0x0050: 5020 6d61 696c 5f72 656c 6179 5f69 6e2d P.mail_relay_in- 0x0060: 6461 3033 2e34 3b20 5468 752c 2030 3920 da03.4;.Thu,.09. 0x0070: 4a75 6c20 3230 3039 2031 363a 3537 3a34 Jul.2009.16:57:4 0x0080: 3720 2d30 3430 300d 0a32 3230 2d41 6d65 7.-0400..220-Ame 0x0090: 7269 6361 204f 6e6c 696e 6520 2841 4f4c rica.Online.(AOL 0x00a0: 2920 616e 6420 6974 7320 6166 6669 6c69 ).and.its.affili 0x00b0: 6174 6564 2063 6f6d 7061 6e69 6573 2064 ated.companies.d etc. This looks good, but it still makes the actual message on the right difficult to read. Is there a way to view those messages in a more friendly way? UPDATE This made it pretty: tcpick -C -yP -r tcp_dump.pcap Thanks!

    Read the article

  • Problem about IP and computer name in Ubuntu

    - by bugbug
    I can't connect to mysql database becase it alway change 192.168.1.101 to ubuntu.local. $ mysql -uroot -padmin1234 -h192.168.1.101 ERROR 1045 (28000) : Access denined for user 'root'@'ubuntu.local' (using password: YES) How do I solve this problem. File: /etc/hosts in this machine 127.0.0.1 localhost 127.0.1.1 ubuntu.ubuntu-domain ubuntu # The following lines are desirable for IPv6 capable hosts ::1 localhost ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts I have no idea about "root'@'ubuntu.local", where is it come from.

    Read the article

  • DRBD not syncing between my nodes when IP is reset

    - by ramdaz
    I am trying to setup DRBD by following the article at http://www.howtoforge.com/setting-up-network-raid1-with-drbd-on-ubuntu-11.10-p2 I am using Ubuntu 10.04 DRBD - 8.3.11 In the first run I had everything working perfectly and when shifting the systems to a production environment I decided to restart the Meta Data creation part and start from scratch. The IPs had changed entirely in the production environment. Issuing drdbadm create-md r0 in both the servers runs successfully. But when I do "drbdadm -- --overwrite-data-of-peer primary all" on the primary it fails to start the re sync. My config file is as given below resource r0 { protocol C; syncer { rate 50M; } startup { wfc-timeout 15; degr-wfc-timeout 60; } net { cram-hmac-alg sha1; shared-secret "aklsadkjlhdbskjndsf8738734jkfkjfkjf"; } on primaryds { device /dev/drbd0; disk /dev/md2; address 172.16.7.1:7788; meta-disk internal; } on secondaryds { device /dev/drbd0; disk /dev/md2; address 172.16.7.3:7788; meta-disk internal; } } Status on primary root at primaryds:~# cat /proc/drbd version: 8.3.7 (api:88/proto:86-91) GIT-hash: ea9e28dbff98e331a62bcbcc63a6135808fe2917 build by root at primaryds, 2012-05-12 15:08:01 0: cs:WFBitMapS ro:Primary/Secondary ds:UpToDate/Inconsistent C r---- ns:0 nr:0 dw:0 dr:200 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:b oos:5690352828 Status on secondary root at secondaryds:/etc/drbd.d# cat /proc/drbd version: 8.3.7 (api:88/proto:86-91) GIT-hash: ea9e28dbff98e331a62bcbcc63a6135808fe2917 build by root at secondaryds, 2012-05-12 15:25:25 0: cs:WFBitMapT ro:Secondary/Primary ds:Inconsistent/UpToDate C r---- ns:0 nr:0 dw:0 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:b oos:5690352828 Log of Primary May 30 13:42:23 primaryds kernel: [ 1584.057076] block drbd0: role( Secondary -> Primary ) disk( Inconsistent -> UpToDate ) May 30 13:42:23 primaryds kernel: [ 1584.086264] block drbd0: Forced to consider local data as UpToDate! May 30 13:42:23 primaryds kernel: [ 1584.086303] block drbd0: Creating new current UUID May 30 13:42:26 primaryds kernel: [ 1586.405551] block drbd0: drbd_sync_handshake: May 30 13:42:26 primaryds kernel: [ 1586.405564] block drbd0: self E8A075F378173D4B:0000000000000004:0000000000000000:0000000000000000 bits:1422588207 flags:0 May 30 13:42:26 primaryds kernel: [ 1586.405574] block drbd0: peer 0000000000000004:0000000000000000:0000000000000000:0000000000000000 bits:1422588207 flags:0 May 30 13:42:26 primaryds kernel: [ 1586.405582] block drbd0: uuid_compare()=2 by rule 30 May 30 13:42:26 primaryds kernel: [ 1586.405587] block drbd0: Becoming sync source due to disk states. May 30 13:42:26 primaryds kernel: [ 1586.405592] block drbd0: Writing the whole bitmap, full sync required after drbd_sync_handshake. May 30 13:42:27 primaryds kernel: [ 1588.171638] block drbd0: 5427 GB (1422588207 bits) marked out-of-sync by on disk bit-map. May 30 13:42:27 primaryds kernel: [ 1588.172769] block drbd0: conn( Connected -> WFBitMapS ) Log in Secondary May 30 13:42:24 secondaryds kernel: [ 1563.304894] block drbd0: peer( Secondary - Primary ) pdsk( Inconsistent - UpToDate ) May 30 13:42:24 secondaryds kernel: [ 1563.339674] block drbd0: drbd_sync_handshake: May 30 13:42:24 secondaryds kernel: [ 1563.339685] block drbd0: self 0000000000000004:0000000000000000:0000000000000000:0000000000000000 bits:1422588207 flags:0 May 30 13:42:24 secondaryds kernel: [ 1563.339695] block drbd0: peer E8A075F378173D4B:0000000000000004:0000000000000000:0000000000000000 bits:1422588207 flags:0 May 30 13:42:24 secondaryds kernel: [ 1563.339703] block drbd0: uuid_compare()=-2 by rule 20 May 30 13:42:24 secondaryds kernel: [ 1563.339709] block drbd0: Becoming sync target due to disk states. May 30 13:42:24 secondaryds kernel: [ 1563.339714] block drbd0: Writing the whole bitmap, full sync required after drbd_sync_handshake. May 30 13:42:26 secondaryds kernel: [ 1565.652342] block drbd0: 5427 GB (1422588207 bits) marked out-of-sync by on disk bit-map. May 30 13:42:26 secondaryds kernel: [ 1565.652965] block drbd0: conn( Connected - WFBitMapT ) The serves are not responding once it reaches this stage. Tried redoing it couple of time but noting happens. Why could the resync not be taking place? I would like some advice? Directions?

    Read the article

  • Active Directory with nodes in multiple IP Addresses

    - by Stormshadow
    I have written some code to fetch user information from an Active Directory Server. Suppose the Active Directory Server has nodes, each of which is another Active Directory Installation in a different geographic location. Eg: one AD server in US and another in Australia with a root AD Server in US with the former two as nodes. Would the filter queries I write for searching users across geographic locations work if I run them on the root AD server ?. The query I use is (|(objectClass=user)(objectClass=person)(objectClass=inetOrgPerson)) I cannot actually test this scenario but need to know the what will happen here.

    Read the article

  • Active Directory with nodes in multiple IP Addresses

    - by Stormshadow
    I have written some code to fetch user information from an Active Directory Server. Suppose the Active Directory Server has nodes, each of which is another Active Directory Installation in a different geographic location. Eg: one AD server in US and another in Australia with a root AD Server in US with the former two as nodes. Would the filter queries I write for searching users across geographic locations work if I run them on the root AD server ?. The query I use is (|(objectClass=user)(objectClass=person)(objectClass=inetOrgPerson)) I cannot actually test this scenario but need to know the what will happen here.

    Read the article

  • Set maximum requests per IP in IIS7

    - by Maxim V. Pavlov
    I have a web site deployed to IIS 7. One page it is has 15+ .js files linked to it. Last two files referenced in <head> tag (loaded last) get 403 forbidden response from server. I have enabled FailedRequestTracing and have been able to see a detailed error code which is 403.502. I suppose over a very short period of time I am just pulling to much and the IIS blocks me. Is there a way I can configure the limit to enable larger number of requests and get rid of 403.502 error?

    Read the article

  • Blocking an IP in Webmin

    - by Dan J
    I've been checking my /var/log/secure log recently and have seen the same bot trying to brute force onto my Centos server running webmin. I created a chain + rule in Networking - Linux Firewall: Drop If source is 113.106.88.146 But I'm still seeing the attempted logins in the log: Jun 6 10:52:18 CentOS5 sshd[9711]: pam_unix(sshd:auth): check pass; user unknown Jun 6 10:52:18 CentOS5 sshd[9711]: pam_succeed_if(sshd:auth): error retrieving information about user larry Jun 6 10:52:19 CentOS5 sshd[9711]: Failed password for invalid user larry from 113.106.88.146 port 49328 ssh2 Here is the contents of /etc/sysconfig/iptables: # Generated by webmin *filter :banned-ips - [0:0] -A INPUT -p udp -m udp --dport ftp-data -j ACCEPT -A INPUT -p udp -m udp --dport ftp -j ACCEPT -A INPUT -p udp -m udp --dport domain -j ACCEPT -A INPUT -p tcp -m tcp --dport 20000 -j ACCEPT -A INPUT -p tcp -m tcp --dport 10000 -j ACCEPT -A INPUT -p tcp -m tcp --dport https -j ACCEPT -A INPUT -p tcp -m tcp --dport http -j ACCEPT -A INPUT -p tcp -m tcp --dport imaps -j ACCEPT -A INPUT -p tcp -m tcp --dport imap -j ACCEPT -A INPUT -p tcp -m tcp --dport pop3s -j ACCEPT -A INPUT -p tcp -m tcp --dport pop3 -j ACCEPT -A INPUT -p tcp -m tcp --dport ftp-data -j ACCEPT -A INPUT -p tcp -m tcp --dport ftp -j ACCEPT -A INPUT -p tcp -m tcp --dport domain -j ACCEPT -A INPUT -p tcp -m tcp --dport smtp -j ACCEPT -A INPUT -p tcp -m tcp --dport ssh -j ACCEPT -A banned-ips -s 113.106.88.146 -j DROP COMMIT # Completed # Generated by webmin *mangle :FORWARD ACCEPT [0:0] :INPUT ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :PREROUTING ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] COMMIT # Completed # Generated by webmin *nat :OUTPUT ACCEPT [0:0] :PREROUTING ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] COMMIT # Completed

    Read the article

  • Linksys router with multiple external IP's

    - by Adrian Mester
    In an office I've got a network connection with 5 external IPs and a Linksys router (I'm not 100% percent sure of the model). I need 4 of those 5 IPs to be routed to a server, and the fifth to be shared between the other computers at the office. This can probably be done using a switch in front of the router. Connect the server and the router to the switch, and let the router handle the rest of the network. Is there a way to configure the router to route the 4 IPs to the server, and create an internal network the the other computers at the same time?

    Read the article

  • Dnsmasq offering IP via DHCP, but nobody is accepting

    - by Matt
    As clients connect the logs light up with DHCPDISCOVER(wlan0) and DHCPOFFER(wlan0) but the IPs being offered are not being accepted. Currently dnsmasq offers IPs on eth1 which works flawlessly. It seems to be just wlan0 that poses this problem for me today. ifconfig of wlan0: wlan0 Link encap:Ethernet HWaddr aa:aa:aa:aa:aa:aa inet addr:10.0.0.2 Bcast:10.255.255.255 Mask:255.0.0.0 inet6 addr: fe80::baa3:86ff:fe70:796a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1609 errors:0 dropped:0 overruns:0 frame:0 TX packets:1268 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:308739 (301.5 KiB) TX bytes:319185 (311.7 KiB)

    Read the article

  • Finding a private (NAT) host's IP using historic destination data

    - by l0c0b0x
    The issue: An unknown private (NAT) client is infected with malware and it's trying to access a Bot server at random times/dates. How we know about this: We receive bot traffic notices/alerts from REN-ISAC. Unfortunately, we don't receive those until the next day after it has happened. What they provide to us is: The source address (of the firewall) The destination addresses (it varies, but they're going to network subnet allocated to a German ISP) The source port (which varies--dynamic ports). Question: What would be the best approach to finding this internal host (historically) with a Cisco ASA as firewall? I'm guessing blocking anything to the destination address(es), and logging that type of traffic/access might allow me to find the source host, but I'm not sure which tool/command would be the most useful. I've seen Netflow thrown into a few responses when it comes to logging, but I'm confused with it's association of Logging, NAL, and nBAR, and how they relate to Netflow.

    Read the article

  • Varnish VCL not allowing two separate IP addresses as backends

    - by Peter Griffin
    Every time I attempt to add an extra back end into our VCL file, it's fails. Here is the DAEMON_OPTS we are running off: DAEMON_OPTS="-a :80 \ -T localhost:6082 \ -f /etc/varnish/custom.vcl \ -u varnish -g varnish \ -S /etc/varnish/secret \ -s malloc,10G" And here is the offending backend(s) backend default { .host = "114.123.456.789"; .port = "8080"; } backend alt { .host = "203.123.456.789"; .port = "80"; } Any Ideas ? Gut feeling is it might need the backends to be set somewhere, but I'm not sure where.

    Read the article

  • Configure sendmail to accept connection from one other IP address

    - by Kumala
    I have a RubyOnRails application running on the same server that runs sendmail. The application sends out (no need to receive) emails via the local sendmail. Now I intend to move sendmail to a dedicated server. How do I make sendmail on that server accept connections from my application on the other server? I modified sendmail.mc from DAEMON_OPTIONS(`Family=inet, Name=MTA-v4, Port=smtp, Addr=127.0.0.1')dnl to DAEMON_OPTIONS(`Family=inet, Name=MTA-v4, Port=smtp')dnl I have also added to /etc/mail/access: Connect:198.211.117.41 RELAY then ran m4 sendmail.mc > sendmail.cf and restarted sendmail. Trying to connect from my app server with telnet on port 25 to the mail server gives me: telnet: Unable to connect to remote host: Connection refused Am I missing something?

    Read the article

  • Tomato VPN connect but cannot ping LAN IP

    - by David Hamilton
    I've setup TomatoVPN using these settings on the server: TAP UDP 1194 Client address pool 10.10.9.1 -10.10.9.254 LAN clients are configured with 10.10.10.x I can connect from a remote client, but pinging anything in the 10.10.10.x results in a "Destination Host Unreachable" error. Here's my client configuration script: remote x.x.x.x 1194 client dev tap0 proto udp resolv-retry infinite nobind persist-key persist-tun float ca ca.crt cert client1.crt key client1.key ns-cert-type server Any suggestions as how I can make this properly bridge the two networks?

    Read the article

  • Solaris TCP/IP performance tuning

    - by Andy Faibishenko
    I am trying to tune a high message traffic system running on Solaris. The architecture is a large number (600) of clients which connect via TCP to a big Solaris server and then send/receive relatively small messages (.5 to 1K payload) at high rates. The goal is to minimize the latency of each message processed. I suspect that the TCP stack of the server is getting overwhelmed by all the traffic. What are some commands/metrics that I can use to confirm this, and in case this is true, what is the best way to alleviate this bottleneck? PS I posted this on StackOverflow originally. One person suggested snoop and dtrace. dtrace seems pretty general - are there any additional pointers on how to use it to diagnose TCP issues?

    Read the article

< Previous Page | 96 97 98 99 100 101 102 103 104 105 106 107  | Next Page >