Search Results

Search found 3674 results on 147 pages for 'floppy drives'.

Page 100/147 | < Previous Page | 96 97 98 99 100 101 102 103 104 105 106 107  | Next Page >

• Sorting out mSSD acceleration on a Acer M3-581TG

  - by PhonicUK

  I recently purchased a Acer Timeline M3 Ultra, it ships with a 500GB HDD and a 20GB mSSD to use as a cache. First thing I did when I got it was format the drives and install a clean OS (on the HDD, the mSSD has nothing on it) - but now I can't figure out how everything needs to be configured in order to use the mSSD as a cache, it just looks like a standard storage drive. I've poked around in the BIOS and there is a SATA mode setting, but it only has one option (AHCI), most of the documentation I've seen on the subject says that the SATA controller needs to be in RAID mode otherwise 'Acceleration' isn't visible in the Intel SRT menu (which for me, it isn't) I've seen a few things that suggest I just need the correct partition layout, I tried this using fdisk from a Linux LiveCD but got nowhere. Any ideas? The laptop shipped with no recovery media so I'm marginally stumped. I don't have any issue with reformatting again if required.

  Read the article

• Notification if SyncToy fails

  - by Joel Coehoorn

  I support a number of laptop users. In the past (before there were many laptops), each user's computer was set up so that their My Documents folder was mapped to a shared folder on the server. This worked very well for desktops, but has several obvious downsides for laptops (no files when you're off-site, etc). I'm exploring several alternatives for laptops to better map the shared drives, and SyncToy seems the best so far. I have a couple trial users set up so that it syncs automatically whenever they log in, along with a desktop icon they can click if they know they'll need something saved before the next login. My problem is that I'm concerned how I, as the maintainer of this system, can spot failures. I don't want my first indication of a problem to come after a user drops their laptop in a lake and it turns out nothing was synced for the last year. Any ideas?

  Read the article

• I have static noise in my speakers and headset

  - by Kazarion

  I have been having a problem with my computer where I am constantly getting static from the point I turn on my PC. I have changed Towers, Hard Drives, added and removed a Sound Blaster Xtreme Sound Card, used 3 different Headsets, and 2 sets of speakers. Lately I have noticed random dips in my frame rates when playing games. Is there any possibility that the graphics card could be causing the static with the possibility of it needing to go in for repairs? Specs: i5-3570K 3.40 GHZ Gigabyte GTX 570 8GB of Corsair Ram MB ASUS|P8Z77-V Z77 3TB Seagate Barracude HDD Rosewill 850W PSU Corsair A70 Heatsink

  Read the article

• Accessing network resources via vpn connection failes

  - by LikeHoo

  I already found some information on this problem here, but I still can't get it to work. Im trying to access some network resources on my server via vpn over the net. Im using a win7 home pc here and a win server 2008 rc2 with installed ras&routing role on the server. For vpn authentication I use a local user on the server with vpn-access. This user also has the rights to access to the network resources, but it neither finds the server under network nor is it able to connect the network drives... In similar topics here I found out that using the same credentials for vpn-authentication and network resources access does not work, but using different user for access didn't work either. All of these examples I found were in an active directory structure, but I don't have an active directory here. Does anyone know how to solve this problem without having to use an active directory? Thanks

  Read the article

• How to access Windows Registry from DOS

  - by SEARAS

  How to access Windows Registry from DOS? I need to access registry from DOS, while I boot from DOS bootable disk. I've searched all the internet, and found only Offline NT Password and Registry Editor, which can not be used in DOS, as I understand. Also I've found RegView (from many mirrors), which isn't working too (I've tried many instructions). Is there any easy-in-usage tool, like reg.exe, which is able to load registry hives, so that I can change registry values?? Or any working instructions ?? Note: I already have a bootable drive, which can read/write to NTFS drives. Thanks in advance!

  Read the article

• How do I establish the network sharing to my WinXP server network drive from my Mac notebook?

  - by mobibob

  I have been able to connect to my WinXP server's shared drives by using Finder's Command-K to browse the network. Unfortunately, when the server gets rebooted, the connection drops and sometimes I cannot get reconnected. I have specified different protocols (afp / cifs / smb) and different login names (connect as...) with limited success. Once I find the right combination, I am good for a few weeks. Once, it seems as though I had to unshared and shared the drive to get it to work. Unfortunately, it is very frustrating, so I try multiple things at one time, so when I finally get to the success point -- I honestly don't know what worked. I followed Mac help, surfed for instructions, issues, etc., but nothing appears to be consistent. I would love for this thread to be the ultimate answer for all time! Can anyone help me? If my description or question need more detail, please ask away!

  Read the article

• SSD install - what do I need to watch out for when reconfiguring SATA ports?

  - by tim11g

  I installed a Samsung 840 SSD in a Windows 7 machine. It seems to be working fine, but I'm not seeing the expected performance. The AS SSD benchmark gives 76 for read and 138 for write. At the upper left of the benchmark it says "pciide - BAD" and "31K - BAD". I'm assuming the "pciide BAD" means the motherboard (Gigabyte GA-P35-DS4) is configured as IDE emulation and needs to change to native SATA. I don't know what the "31K" refers to. The bios settings look like this: I saw this article that indicates that changing the SATA mode of the boot drive can cause problems (Blue Screen): Error message occurs after you change the SATA mode of the boot drive What is the correct procedure to change the SATA Mode without causing a system failure? Apply the registry change from the MSFT article above first, then reboot and change the SATA mode? Will the SATA mode change in the BIOS affect other drives?

  Read the article

• Is there any Mac Pro hardware parts that can ONLY be purchased thru Apple?

  - by bigp

  I'd like to know if I need to be concerned about any hardware parts that I should include in a brand new Mac Pro purchase, instead of trying to hunt it down on 3rd party vendors (or whitelist vendors / hardware suppliers). The main components I'm interested for "upgradeability" are: Processors (If starting with Two 2.4GHz Quad-Core "Westmere"); RAM (If starting with the least possible, which seems to be 6 x 1GB); Video Cards (If starting with one ATI Radeon HD 5770, can a 2nd one be purchased elsewhere?) Hard-Drives (Since these are mounted in specialized trays [if I'm not mistaking], are they also sold elsewhere? And can they be bought as SSDs?) Power Supply (Do I need to be concerned about this at all, or does it auto-adjust depending on the new component upgrades?) I just want to be sure by choosing a Mac Pro with lower component specifications that I can in fact purchase upgrade parts cheaper elsewhere. Thanks!

  Read the article

• TV network capabilities.

  - by Narcolapser

  Question: Can the major TV producer's internet TV systems access network resource? Info: I'm looking for large TV's right now for my company to set up in conference rooms. We want the ability to load presentations with out having to have a computer to do so. Our hope is to put things on to network drives and access and display them from there. I've heard that LG's can do this if you convert the power point file in to a show format. that's fine. I just need to get this information to the TV with out the computer attached. Can anyone tell me if companies like LG, Vizio, Sony, Samsung, etc. have TV's that are capable of doing this? Thanks ~n

  Read the article

• How can I restrict a group to reading only two particular folders with Windows Server?

  - by Lord Torgamus

  I have a group of users on Windows Server 2003 who need to be able to read the contents of two directories but not be able to access anything else on the server (including read-only access). One of the directories is K:\projectFour\config — and the other is similarly formatted — so it would be okay for group members to be able to list the contents of K:\ and K:\projectFour\ but not actually read anything in those directories. I've found several resources via SF/Google, including how to restrict individual folders/drives and how to allow users to only run specific executables, but that information ultimately didn't solve my issue. Sorry if this is a really simple thing to do, I'm usually a developer and don't know the first thing about servers or group policies. Finally, I should mention that this isn't a fully concrete question, as it will be implemented eventually but I don't personally have a copy of Windows Server 2003 to test with right now.

  Read the article

• How can I accurately determine the age of a hard drive?

  - by Todd Stout

  Yes, if it's large, heavy, and only 65 Meg in capacity, you can assume it's ancient. An RLL controller would positively indicate the drive is from antiquity. What about drives that are only 3 or 4 years old? If I know the serial number, make and model is there a public database that indicates a manufacturing date? Update: As trite as this question might seem to some, the hard drive I was looking at that precipitated this question had no obvious manufacturing date stamped on it. I realize that most do. I think the answers given are very useful to myself and others.

  Read the article

• Installing software at large organisation

  - by CJ7

  I have to give an MSI to a large organisation for it to install (presumably via GPO) on to some of their workstations that are running XP. I already know that my application is not allowed to write to the application folder. I realise it should be writing to the AppData folder. The organisation has allocated a folder on a server for the database files and other configuration files. This folder is referenced by UNC naming and not by mapped drives. My question is: based on normal practices, is my app likely to have the rights to create a sub-folder on this server? Is my app likely to have the rights to create files on this server?

  Read the article

• Can KVM roll back changes to Virtual Disks automatically?

  - by Cygon

  I'm currently using VirtualBox on my Linux server to run a small Windows guest OS. I've configured its main virtual hard drive as what VBox calls "Immutable" - meaning that any changes to it are written into a differencing image that is discarded when the system reboots. Can KVM do something similar? I've read about snapshots via "savevm", "loadvm" but I believe that's saved states, not differencing images. What I ultimately want is a VM with two drives: one reverts on each reboot, one keeps its changes. Ideally, the unchangeable drive image should be stored with only read access granted to the user running KVM.

  Read the article

• How to best config my PC. 2 small SDDs and a 1TB conventional drive

  - by Chadworthington

  I just got a new PC. It has 3 drives C Drive: 80GB SDD Drive P Drive: 120GB SDD (for core programs) D Drive: 1TB SDD (for data and other) I have an MSDN subscription and I am the type of person that loves to install tons of software to check it out. I am very worried that installation programs are forcing me to place a large amount of files on the small C drive. I fear that I will quickly run out of space on my C drive while having ample space on my TB drive. What would you do in my shoes? I didn't select this PC or set the config up. I am wishing that the 120 SSD was my C, to give me a little more room to grow. I guess there are no magic solutions here but I am just looking for your general thoughts

  Read the article

• Need to Extend Volume

  - by Roger Galindo

  Ok Here is where I am... I have an HP Proliant with 8 Drives configured as RAID5, and C:\Drive Disk 0 and D:\ drive Disk 1. I need to add more space to Disk 0 (C:) and have 150GB available on Disk 1 (D:). I tested the Disk Mgmt on D:\ and freed up 4GB which now shows to be Unallocated. How do I add the 4GB of Unallocated to the c:\? When I click on C:\ the Menu shows "Extend Volume" as Grayed Out not Black but the D:\ Drive shows Extend Volume as selectable/black.

  Read the article

• Dual HDD dual boot Win7/Win7 hibernate corrupts partitions?

  - by Ivan Zlatev

  I have two SSDs in my laptop. Both have 2 partitions each one with Windows 7 64bit and another one with OEM stuff on it (SYSTEM_DRV). I use the BIOS boot menu to boot between the drives. I have removed the drive letters so that no partitions of drive 1 are mapped in windows 2 on drive 2 and wise-versa. What I have observered however is that when I hibernate windows 1, boot windows 2 do some work and shutdown then resume windows 1 - the windows 2 partition will get corrupt quite often. Just happened actually - it is shown as "RAW" in the Disk manager instead of NTFS and windows will blue screen at boot. Alternatively I've seen cases where chkdsk will run and will wipe out all security descriptors making the partition completly unbootable. Why am I seeing these corruptions and what can I do to prevent them?

  Read the article

• Network Drive Via Ethernet Port for Speed?

  - by Yar

  I have a Macbook with Firewire 400 and USB 2.0, so the only way I can get fast external storage is through the Ethernet port. A really fast firewire 800 drive on ANOTHER computer is actually much faster than the built-in drive (according to XBench). So I thought I would try to go one better and buy an ethernet-ready drive. I bought a Seagate GoFlex™ Home Network Storage System, and it seems like the only way to get it to work is to plug it into a router. Can this drive be used without a router (i.e., direct to computer)? Are there any drives that can be plugged directly into the ethernet port for fast access? I don't want the drive on my router: I want it on my computer. Ideally I'd need 7200rpm or faster, too... Update: Just chatted with Seagate and they said that this particular drive will not work that way. Will any others?

  Read the article

• Areca 1880ix RAID hangs

  - by Dave

  Areca RAID controller ARC-1880ix-12 (firmware 1.50) hangs when on high load. My setup is: Chenbro 3U chassis Intel S5500BC mainboard Xeon 5603 CPU 16GB of RAM 12 Seagate SAS drives ST32000645SS (2 of them as hot spare, 10 as RAID10) Mellanox Infiniband HBA card This server is working as external infiniband storage for Xen VMs. When load is quite big Areca's firmware hangs - it becomes unreachable even from Areca's ethernet adapter. After resetting the server power it returns to normal operation. While Areca is hanged I can confirm that it is powered (ethernet link is active) and Infiniband HBA works Ok. Thanks in advance for any idea or suggestion where the problem might be!

  Read the article

• is there a way to prespecify to overwrite files with same name?

  - by Celeritas

  Connections to network drives are ridiculously slow (e.g. 15kb/sec on really good days) and when I'm copying files I leave my desk. My problem is when there is a file with the same name to be overwritten, is there a way to specify in advanced to overwrite files? I know it has the option "do same for next x conflicts" but that doesn't popup until (in some cases) a long time after the files start copying. See my dilemma? Example: copying 500 files, estimated time 2 hours, I leave, after 10 minutes message comes up about file with same name and asks if it should overwrite (in this time copying stalls), I come back 30 minutes latter to find only the files in the 10 minutes copied. Out of curiosity how could the network speed be so bad? I asked the boss and he said because it gets routed around a lot and is just bad :(

  Read the article

• XP can't read data from transferred HD

  - by Alexander Miller

  Computer A, running XP, died. XP was installed on a fresh HD in computer B. Slaved data-backup HD from A was installed as slave on B. B will not read it; shows only 2 folders, Recycler and System Volume Info. All of these are older machines with IDE drives. What's going on & how can I read/transfer the data from the transferred drive? This was only a trial run. Actually I will need to transfer the master HD from A - which has XP on it - and read from its data partition because (blush) the backup drive was not up to date.

  Read the article

• Big noise from Power Supply Unity Fa? Should I replace it immediately?

  - by EApubs

  Recently, I started to get a large noise from my PC when switched on. After some time, it disappears. I discovered that the issue is with the Power Supply Unit. Does this mean I have a failing PSU? Will it harm the PC if I didn't replace it immediately? Several years ago I bought a new computer casing which is very weird. Its small and compact. Normally, we have the PSU in the top. But in here, the PSU is on the bottom and right below the hard drive. Recently, two of my hard drives started to show problems. Read errors and bad sectors. Can it be the PSU and the design of the casing? Here's an image of the PSU and the hard drive :

  Read the article

• Is SATA bandwith per Port or per Controller?

  - by instanceofTom

  I always assumed that it was per Controller channel, and that If I have 4xSATA 3.0Gb/s ports on my Motherboard then I should have a potential 12.0Gb/s of bandwith. However, after doing some searching I found conflicting information suggesting that if I had 4xSATA drives connected to my MB and were using them simultaneously each drive would get only 3.0Gb/s /4 = 768 Mb/s max bandwith. So I wanted to clear up my understanding. Side question: Are there other hdd/ssd bandwith bottlenecks to be aware of? (Links to already answered questions are more than welcome)

  Read the article

• Automatically distinguish difference between multiple HDDs in linux?

  - by Jakobud

  I'm running Ubuntu Server 9.10. I have two external USB HDDs. I use them each for different backup reasons. So certain data gets stored on one HDD, and different information gets stored on the other HDD. I want to make a script that can look at the external HDD can determine which HDD it is, so that it can copy the proper information to it. Is there a way for Linux to determine this? Like if I see one HDD as /dev/sdc1, then unplug it and plug in the other HDD, should Linux see it as /dev/sdd1 or will it be /dev/sdc1? I'm a bit of a Linux newb and I don't quite understand how it determines the /dev/sdxx values that it assigns to drives.

  Read the article

• What useful things can one add to one's .bashrc?

  - by gyaresu

  Is there anything that you can't live without and will make my life SO much easier? Here are some that I use ('diskspace' & 'folders' are particularly handy). # some more ls aliases alias ll='ls -alh' alias la='ls -A' alias l='ls -CFlh' alias woo='fortune' alias lsd="ls -alF | grep /$" # This is GOLD for finding out what is taking so much space on your drives! alias diskspace="du -S | sort -n -r |more" # Command line mplayer movie watching for the win. alias mp="mplayer -fs" # Show me the size (sorted) of only the folders in this directory alias folders="find . -maxdepth 1 -type d -print | xargs du -sk | sort -rn" # This will keep you sane when you're about to smash the keyboard again. alias frak="fortune" # This is where you put your hand rolled scripts (remember to chmod them) PATH="$HOME/bin:$PATH"

  Read the article

• Disadvantages of enabling AHCI after Win7 install

  - by Mario De Schaepmeester

  I've formatted my notebook that has a 5400RPM HDD with ~500GB capacity. After installing Windows 7 and about half the drivers (including chipset) I began to doubt whether to go for IDE or AHCI mode for my hard drive. There used to be a lot of discussion on the internet which is better and so far I understood it was particularly helpful on SSDs. Now the general consensus seems to be that AHCI mode is best for most hard drives. I have thus enabled AHCI in the middle of configuring my notebook (rest of the drivers, necessary software etc...) Two questions: considering my HDD's spec above, should I leave it on? Is there any disadvantage of enabling it after Windows 7 and chipset drivers installation? Windows 7 version is 64 bit Home Premium.

  Read the article

< Previous Page | 96 97 98 99 100 101 102 103 104 105 106 107  | Next Page >