relative positioning - Page 100

F# WPF Form – the basics

- by MarkPearl

I was listening to Dot Net Rocks show #560 about F# and during the podcast Richard Campbell brought up a good point with regards to F# and a GUI. In essence what I understood his point to be was that until one could write an end to end application in F#, it would be a hard sell to developers to take it on. In part I agree with him, while I am beginning to really enjoy learning F#, I can’t but help feel that I would be a lot further into the language if I could do my Windows Forms like I do in C# or VB.NET for the simple reason that in “playing” applications I spend the majority of the time in the UI layer… So I have been keeping my eye out for some examples of creating a WPF form in a F# project and came across Tim’s F# Twitter Stream Sample, which had exactly this…. of course he actually had a bit more than a basic form… but it was enough for me to scrap the insides and glean what I needed. So today I am going to make just the very basic WPF form with all the goodness of a XAML window. Getting Started First thing we need to do is create a new solution with a blank F# application project – I have made mine called FSharpWPF. Once you have the project created you will need to change the project type from a Console Application to a Windows Application. You do this by right clicking on the project file and going to its properties… Once that is done you will need to add the appropriate references. You do this by right clicking on the References in the Solution Explorer and clicking “Add Reference'”. You should add the appropriate .Net references below for WPF & XAMl to work. Once these references are added you then need to add your XAML file to the project. You can do this by adding a new item to the project of type xml and simply changing the file extension from xml to xaml. Once the xaml file has been added to the project you will need to add valid window XAML. Example of a very basic xaml file is shown below… <Window xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="F# WPF WPF Form" Height="350" Width="525"> <Grid> </Grid> </Window> Once your xaml file is done… you need to set the build action of the xaml file from “None” to “Resource” as depicted in the picture below. If you do not set this you will get an IOException error when running the completed project with a message along the lines of “Cannot locate resource ‘window.xaml’ You then need to tie everything up by putting the correct F# code in the Program.fs to load the xaml window. In the Program.fs put the following code… module Program open System open System.Collections.ObjectModel open System.IO open System.Windows open System.Windows.Controls open System.Windows.Markup [<STAThread>] [<EntryPoint>] let main(_) = let w = Application.LoadComponent(new System.Uri("/FSharpWPF;component/Window.xaml", System.UriKind.Relative)) :?> Window (new Application()).Run(w) Once all this is done you should be able to build and run your project. What you have done is created a WPF based window inside a FSharp project. It should look something like below… Nothing to exciting, but sufficient to illustrate the very basic WPF form in F#. Hopefully in future posts I will build on this to expose button events etc.

Read the article

ASP.NET MVC 3 Client-Side Validation Summary with jQuery Validation (Unobtrusive JavaScript)

- by Soe Tun

When we were working with ASP.NET MVC 2, we needed to write our own JavaScript to get Client-Side Validation Summary with jQuery Validation plugin. I am one of those unfortunate people still stuck with .NET Framework Runtime 2.0 and .NET Framework 3.5; meaning I am still on ASP.NET MVC 2. So I will still keep on supporting by answering any question you may have with my original code. Long awaited ASP.NET MVC 3 has been released, and it supports Client Side Validation Summary with jQuery out-of-the-box with new features like Unobtrusive JavaScript. 1. _Layout.cshtml Template Notice that I am using Protocol Relative URLs ( i.e., '//'. Not 'http://' or 'https://' ) to reference script files and css files and you should use it too like that! However, please note that IE7 and IE8 will download the CSS files twice so use it with judgement. <!DOCTYPE html> <html> <head> <title>@ViewBag.Title</title> <link href="@Url.Content("~/Assets/Site.css")" rel="stylesheet" type="text/css" /> <link href="//ajax.googleapis.com/ajax/libs/jqueryui/1.8.9/themes/redmond/jquery-ui.css" rel="stylesheet" type="text/css" media="screen" /> </head> <body> @RenderBody() <script src="//ajax.googleapis.com/ajax/libs/jquery/1.4.4/jquery.min.js" type="text/javascript"></script> <script src="//ajax.googleapis.com/ajax/libs/jqueryui/1.8.9/jquery-ui.min.js" type="text/javascript"></script> <script src="//ajax.microsoft.com/ajax/jQuery.Validate/1.7/jQuery.Validate.min.js" type="text/javascript"></script> <script src="//ajax.aspnetcdn.com/ajax/mvc/3.0/jquery.validate.unobtrusive.min.js" type="text/javascript"></script> </body> </html> 2. MVC View Template There are 3 things you *must* do exactly to get Client Side Validation Summary working. (1) You must declare your Validation Summary **inside** the `Html.BeginForm()` block like below. (2) You must pass `excludePropertyErrors: false` to the Html.ValidationSummary() method. @using (Html.BeginForm()) { @Html.ValidationSummary(false, "Please fix these errors.");  } (3) You have to put the following two elements in the `<appSettings />` block of your Web.config file. <add key="ClientValidationEnabled" value="true"/> <add key="UnobtrusiveJavaScriptEnabled" value="true"/> That is all you need to do. Simple, right? I will upload a sample project for download soon. Please let me know if you run into some issues. P.S: Without getting into too much technical details, I just wanted to let you know what I went through to get this to work. I had to look into the ASP.NET MVC 3 RTM Source Code and the jquery.validate.unobtrusive.js source. Initially, I thought I have to hack the jquery.validate.unobtrusive.js or something to get this to work. But after digging into MVC3 RTM source, I found out how to do it.

Read the article

Common business drivers that lead to creating and sustaining a project

Common business drivers that lead to creating and sustaining a project include and are not limited to: cost reduction, increased return on investment (ROI), reduced time to market, increased speed and efficiency, increased security, and increased interoperability. These drivers primarily focus on streamlining and reducing cost to make a company more profitable with less overhead. According to Answers.com cost reduction is defined as reducing costs to improve profitability, and may be implemented when a company is having financial problems or prevent problems. ROI is defined as the amount of value received relative to the amount of money invested according to PayperclickList.com. With the ever increasing demands on businesses to compete in today’s market, companies are constantly striving to reduce the time it takes for a concept to become a product and be sold within the global marketplace. In business, some people say time is money, so if a project can reduce the time a business process takes it in fact saves the company which is always good for the bottom line. The Social Security Administration states that data security is the protection of data from accidental or intentional but unauthorized modification, destruction. Interoperability is the capability of a system or subsystem to interact with other systems or subsystems. In my personal opinion, these drivers would not really differ for a profit-based organization, compared to a non-profit organization. Both corporate entities strive to reduce cost, and strive to keep operation budgets low. However, the reasoning behind why they want to achieve this does contrast. Typically profit based organizations strive to increase revenue and market share so that the business can grow. Alternatively, not-for-profit businesses are more interested in increasing their reach within communities whether it is to increase annual donations or invest in the lives of others. Success or failure of a project can be determined by one or more of these drivers based on the scope of a project and the company’s priorities associated with each of the drivers. In addition, if a project attempts to incorporate multiple drivers and is only partially successful, then the project might still be considered to be a success due to how close the project was to meeting each of the priorities. Continuous evaluation of the project could lead to a decision to abort a project, because it is expected to fail before completion. Evaluations should be executed after the completion of every software development process stage. Pfleeger notes that software development process stages include: Requirements Analysis and Definition System Design Program Design Program Implementation Unit Testing Integration Testing System Delivery Maintenance Each evaluation at every state should consider all the business drivers included in the scope of a project for how close they are expected to meet expectations. In addition, minimum requirements of acceptance should also be included with the scope of the project and should be reevaluated as the project progresses to ensure that the project makes good economic sense to continue. If the project falls below these benchmarks then the project should be put on hold until it does make more sense or the project should be aborted because it does not meet the business driver requirements. References Cost Reduction Program. (n.d.). Dictionary of Accounting Terms. Retrieved July 19, 2009, from Answers.com Web site: http://www.answers.com/topic/cost-reduction-program Government Information Exchange. (n.d.). Government Information Exchange Glossary. Retrieved July 19, 2009, from SSA.gov Web site: http://www.ssa.gov/gix/definitions.html PayPerClickList.com. (n.d.). Glossary Term R - Pay Per Click List. Retrieved July 19, 2009, from PayPerClickList.com Web site: http://www.payperclicklist.com/glossary/termr.html Pfleeger, S & Atlee, J.(2009). Software Engineering: Theory and Practice. Boston:Prentice Hall Veluchamy, Thiyagarajan. (n.d.). Glossary « Thiyagarajan Veluchamy’s Blog. Retrieved July 19, 2009, from Thiyagarajan.WordPress.com Web site: http://thiyagarajan.wordpress.com/glossary/

Read the article

Inspiring a co-worker to adopt better coding practices?

- by Aaronaught

In the Handling my antiquated coworker question, various people discussed strategies for dealing with coworkers who are unwilling to integrate their workflow with the team's. I'd like, if possible, to learn some strategies for "teaching" a coworker who is merely ignorant of modern techniques and tools, and possibly a little apathetic. I've started working with a programmer who until recently has been working in relative isolation, in a different part of the company. He has extensive domain knowledge and most importantly he has demonstrated good problem-solving skills, something which many candidates seem to lack. However, the actual (C#) code I've seen is a throwback to the VB6 days. Procedural structure, Hungarian notation, global variables (abuse of static), no interfaces, no tests, non-use of Generics, throwing System.Exception... you get the idea. This programmer is a fair bit older than I am and, by first impressions at least, doesn't actively seek positive change. I'm not going to say resistant to change, because I think that is largely an issue of how the topic gets broached, and I want to be prepared. Programmers tend to be stubborn people, and going in with guns blazing and instituting rip-it-to-shreds code reviews and strictly-enforced policies is very likely not going to produce the end result that I want. If this were a new hire, a junior programmer, I wouldn't think twice about taking a "mentor" stance, but I'm extremely wary of treating an experienced employee as a clueless newbie (which he's not - he just hasn't kept pace with certain advancements in the field). How might I go about raising this developer's code quality standard the Dale Carnegie way, through gentle persuasion and non-material incentives? What would be the best strategy for effecting subtle, gradual changes, without creating an adversarial situation? Have other people - especially lead developers - been in this type of situation before? Which strategies were successful at stimulating interest and creating a positive group dynamic? Which strategies weren't successful and would be better to avoid? Clarifications: I really feel that several people are answering based on personal feelings without actually reading all of the details of the question. Please note the following, which should have been implied but I am now making explicit: This coworker is only my "senior" by virtue of age. I never said that his title, sphere of influence, or years at the organization exceed mine, and in fact, none of those things are true. He's a LOB programmer who's been absorbed into the main development shop. That's it. I am not a new hire, junior programmer, or other naïve idiot with grand plans to transform the company overnight. I am basically in charge of the software process, but as many who've worked as "leads" will know, responsibilities don't always correlate precisely with the org chart. I'm not asking people how to get my way, come hell or high water. I could do that if I wanted to, with the net result being that this person would become resentful and/or quit. Please try to understand that I am looking for a social, cooperative method of driving change. The mention of "...global variables... no tests... throwing System.Exception" was intended to demonstrate that the problems are not just superficial or aesthetic. Practices that may work for relatively small CRUD apps do not necessarily work for large enterprise apps, and in fact, none of the code so far has actually passed the integration tests. Please, try to take the question at face value, accept that I actually know what I'm talking about, and either answer the question that I actually asked or move on. P.S. My sincerest gratitude to those who -did- offer constructive advice rather than arguing with the premise. I'm going to leave this open for a while longer as I'm hoping to hear more in the way of real-world experiences.

Read the article

SQL Sentry Truth-Telling and Disk Configuration

- by AjarnMark

Recently, SQL Sentry told me something about my SQL Server disk configurations that I just didn’t want to believe, but alas, it was true. Several days ago I posted my First Impressions of the SQL Sentry Power Suite. Today’s post could fall into the category of, “Hey, as long as you have that fancy tool…” Unfortunately, it also falls into the category of an overloaded worker taking someone else’s word for the truth, not verifying it with independent fact-checking, and then making decisions based on that. Here’s my story… I’m not exactly an Accidental DBA (or Involuntary DBA as Paul Randal calls it). I came to this company five years ago as a lead application developer with extensive experience in database design and development. I worked my way into management, and along the way, took over the DBA responsibilities. Fortunately, our systems run pretty smoothly most of the time, but I’m always looking for ways to make them better and to fit into my understanding of best practices. When I took over as DBA, I inherited a SQL 2000 server with about 30 databases on it supporting our main systems, and a SQL 2005 server with multiple instances. Both of these servers were configured with the Operating System and Application files on the C drive, data files on a different drive letter, and log files on a third drive letter. Even before I took over as DBA, I verified that this was true with a previous server administrator, and that these represented actual separate disks. He stated that they did, and I thought that all was well. Then one day, I’m poking around inside the SQL Sentry Performance Advisor, checking out features as I am evaluating whether to purchase the product, and I come across a Disk Configuration section. The first thing I notice is that the drives do not have the proper partition offset, which was not at all surprising to me given the age of the installation and the relative newness of that topic. But what threw me for a loop was that the graphic display appeared to be telling me that I did not in fact have three separate drives (or arrays) but rather had two, and that the log files were merely on a separate volume on the same physical array as the OS. I figured that I must be reading it wrong so I scanned the Help file, but that just seemed to confirm my interpretation. Then I thought, “there must be something wrong with the demo version of the software! This can’t be right!” But just to double-check, I went to our current server admin to talk it over with him, and sure enough, SQL Sentry was telling the truth! I was stunned! I quickly went through the grieving process…denial…anger…reconciliation. Here was something that I thought was such a basic truth that was turned upside down. OK, granted, this wasn’t disastrous. Our databases didn’t suddenly grind to a halt. I didn’t get calls late at night inquiring about the sudden downturn in performance. But it was a bit of a shock to the system, in a good way, to jolt me out of taking what I had believed as the truth for granted, and instead to Trust, but Verify! Yes, before someone else points it out, I know that there are”free” disk management tools built-in to Windows that would have told me the same thing if I had only looked at them; I did not have to buy a fancy tool to tell me that, but the fact is, until I was evaluating the tool, I had just gone with what I was told, and never bothered to check what was actually there. So, what things do you believe to be true but you actually never verified?

Read the article

C#: A "Dumbed-Down" C++?

- by James Michael Hare

I was spending a lovely day this last weekend watching my sons play outside in one of the better weekends we've had here in Saint Louis for quite some time, and whilst watching them and making sure no limbs were broken or eyes poked out with sticks and other various potential injuries, I was perusing (in the correct sense of the word) this month's MSDN magazine to get a sense of the latest VS2010 features in both IDE and in languages. When I got to the back pages, I saw a wonderful article by David S. Platt entitled, "In Praise of Dumbing Down" (msdn.microsoft.com/en-us/magazine/ee336129.aspx). The title captivated me and I read it and found myself agreeing with it completely especially as it related to my first post on divorcing C++ as my favorite language. Unfortunately, as Mr. Platt mentions, the term dumbing-down has negative connotations, but is really and truly a good thing. You are, in essence, taking something that is extremely complex and reducing it to something that is much easier to use and far less error prone. Adding safeties to power tools and anti-kick mechanisms to chainsaws are in some sense "dumbing them down" to the common user -- but that also makes them safer and more accessible for the common user. This was exactly my point with C++ and C#. I did not mean to infer that C++ was not a useful or good language, but that in a very high percentage of cases, is too complex and error prone for the job at hand. Choosing the correct programming language for a job is a lot like choosing any other tool for a task. For example: if I want to dig a French drain in my lawn, I can attempt to use a huge tractor-like backhoe and the job would be done far quicker than if I would dig it by hand. I can't deny that the backhoe has the raw power and speed to perform. But you also cannot deny that my chances of injury or chances of severing utility lines or other resources climb at an exponential rate inverse to the amount of training I may have on that machinery. Is C++ a powerful tool? Oh yes, and it's great for those tasks where speed and performance are paramount. But for most of us, it's the wrong tool. And keep in mind, I say this even though I have 17 years of experience in using it and feel myself highly adept in utilizing its features both in the standard libraries, the STL, and in supplemental libraries such as BOOST. Which, although greatly help with adding powerful features quickly, do very little to curb the relative dangers of the language. So, you may say, the fault is in the developer, that if the developer had some higher skills or if we only hired C++ experts this would not be an issue. Now, I will concede there is some truth to this. Obviously, the higher skilled C++ developers you hire the better the chance they will produce highly performant and error-free code. However, what good is that to the average developer who cannot afford a full stable of C++ experts? That's my point with C#: It's like a kinder, gentler C++. It gives you nearly the same speed, and in many ways even more power than C++, and it gives you a much softer cushion for novices to fall against if they code less-than-optimally. A bug is a bug, of course, in any language, but C# does a good job of hiding and taking on the task of handling almost all of the resource issues that make C++ so tricky. For my money, C# is much more maintainable, more feature-rich, second only slightly in performance, faster to market, and -- last but not least -- safer and easier to use. That's why, where I work, I much prefer to see the developers moving to C#. The quantity of bugs is much lower, and we don't need to hire "experts" to achieve the same results since the language itself handles those resource pitfalls so prevalent in poorly written C++ code. C++ will still have its place in the world, and I'm sure I'll still use it now and again where it is truly the correct tool for the job, but for nearly every other project C# is a wonderfully "dumbed-down" version of C++ -- in the very best sense -- and to me, that's the smart choice.

Read the article

Computing a normal matrix in conjunction with gluLookAt

- by Chris Smith

I have a hand-rolled camera class that converts yaw, pitch, and roll angles into a forward, side, and up vector suitable for calling gluLookAt. Using this camera class I can modify the model-view matrix to move about the 3D world just fine. However, I am having trouble when using this camera class (and associated model-view matrix) when trying to perform directional lighting in my vertex shader. The problem is that the light direction, (0, 1, 0) for example, is relative to where the 'camera is looking' and not the actual world coordinates. (Or is this eye coordinates vs. model coordinates?) I would like the light direction to be unaffected by the camera's viewing direction. For example, when the camera is looking down the Z axis the ground is lit correctly. However, if I point the camera straight at the ground, then it goes dark. This is (I think) because the light direction is parallel with the camera's 'up' vector which is perpendicular with the ground's normal vector. I tried computing the normal matrix without taking the camera's model view into account, but then none of my objects were rotated correctly. Sorry if this sounds vague. I suspect there is a straight forward answer, but I'm not 100% clear on how the normal matrix should be used for transforming vertex normals in my vertex shader. For reference, here is pseudo code for my rendering loop: pMatrix = new Matrix(); pMatrix = makePerspective(...) mvMatrix = new Matrix() camera.apply(mvMatrix); // Calls gluLookAt // Move the object into position. mvMatrix.translatev(position); mvMatrix.rotatef(rotation.x, 1, 0, 0); mvMatrix.rotatef(rotation.y, 0, 1, 0); mvMatrix.rotatef(rotation.z, 0, 0, 1); var nMatrix = new Matrix(); nMatrix.set(mvMatrix.get().getInverse().getTranspose()); // Set vertex shader uniforms. gl.uniformMatrix4fv(shaderProgram.pMatrixUniform, false, new Float32Array(pMatrix.getFlattened())); gl.uniformMatrix4fv(shaderProgram.mvMatrixUniform, false, new Float32Array(mvMatrix.getFlattened())); gl.uniformMatrix4fv(shaderProgram.nMatrixUniform, false, new Float32Array(nMatrix.getFlattened())); // ... gl.drawElements(gl.TRIANGLES, this.vertexIndexBuffer.numItems, gl.UNSIGNED_SHORT, 0); And the corresponding vertex shader: // Attributes attribute vec3 aVertexPosition; attribute vec4 aVertexColor; attribute vec3 aVertexNormal; // Uniforms uniform mat4 uMVMatrix; uniform mat4 uNMatrix; uniform mat4 uPMatrix; // Varyings varying vec4 vColor; // Constants const vec3 LIGHT_DIRECTION = vec3(0, 1, 0); // Opposite direction of photons. const vec4 AMBIENT_COLOR = vec4 (0.2, 0.2, 0.2, 1.0); float ComputeLighting() { vec4 transformedNormal = vec4(aVertexNormal.xyz, 1.0); transformedNormal = uNMatrix * transformedNormal; float base = dot(normalize(transformedNormal.xyz), normalize(LIGHT_DIRECTION)); return max(base, 0.0); } void main(void) { gl_Position = uPMatrix * uMVMatrix * vec4(aVertexPosition, 1.0); float lightWeight = ComputeLighting(); vColor = vec4(aVertexColor.xyz * lightWeight, 1.0) + AMBIENT_COLOR; } Note that I am using WebGL, so if the anser is use glFixThisProblem(...) any pointers on how to re-implement that on WebGL if missing would be appreciated.

Read the article

Tyrus 1.8

- by Pavel Bucek

Another version of Tyrus, the reference implementation of JSR 356 – Java API for WebSocket is out! Complete list of fixes and features is below, but let me describe some of the new features in more detail. All information presented here is also available in Tyrusdocumentation. What’s new? First to mention is that JSR 356 Maintenance review Ballot is over and the change proposed for 1.1 release was accepted. More details about changes in the API can be found in this article. Important part is that Tyrus 1.8 implements this API, meaning you can use Lambda expressions and some features of Nashorn without the need for any workarounds. Almost all other features are related to client side support, which was significantly improved in this release. Firstly – I have to admit, that Tyrus client contained security issue – SSL Hostname verification was not performed when connecting to “wss” endpoints. This was fixed as part of TYRUS-339 and resulted in some changes in the client configuration API. Now you can control whether HostnameVerification should be performed (SslEngineConfigurator#setHostnameVerificationEnabled(boolean)) or even set your own HostnameVerifier (please use carefully): #setHostnameVerifier(…). Detailed description can be found in Host verification chapter. Another related enhancement is support for Http Basic and Digest authentication schemes. Tyrus client now enables users to provide credentials and underlying implementation will take care of everything else. Our implementation is strictly non pre-emptive, so the login information is sent always as a response to 401 Http Status Code. If the Basic and Digest are not good enough and there is a need to use some custom scheme or something which is not yet supported in Tyrus, custom Authenticator can be registered and the authentication part of the handshake process will be handled by it. Please seeClient HTTP Authentication chapter in the user guide for more details. There are other features, like fine-grain threadpool configuration for JDK client container, build-in Http redirect support and some reshuffling related to unifying the location of client configuration classes and properties definition – every property should be now part of ClientProperties class. All new features are described in the user guide – in chapterTyrus proprietary configuration. Update – Tyrus 1.8.1 There was another slightly late reported issue related to running in environments with SecurityManager enabled, so this version fixes that. Another noteworthy fixes are TYRUS-355 and TYRUS-361; the first one is about incorrect thread factory used for shared container timeout, which resulted in JVM waiting for that thread and not exiting as it should. The other issue enables relative URIs in Location header when using redirect feature. Links Tyrus homepage mailing list JIRA Complete list of changes: Bug [TYRUS-333] – Multiple endpoints on one client [TYRUS-334] – When connection is closed by a peer, periodic heartbeat pong is not stopped [TYRUS-336] – ReaderBuffer.getNextChars() keeps blocking a server thread after client has closed the session [TYRUS-338] – JDK client SSL filter needs better synchronization during handshake phase [TYRUS-339] – SSL hostname verification is missing [TYRUS-340] – Test PathParamTest are not stable with JDK client [TYRUS-341] – A control frame inside a stream of continuation frames is treated as the part of the stream [TYRUS-343] – ControlFrameInDataStreamTest does not pass on GF [TYRUS-345] – NPE is thrown, when shared container timeout property in JDK client is not set [TYRUS-346] – IllegalStateException is thrown, when using proxy in JDK client [TYRUS-347] – Introduce better synchronization in JDK client thread pool [TYRUS-348] – When a client and server close connection simultaneously, JDK client throws NPE [TYRUS-356] – Tyrus cannot determine the connection port for a wss URL [TYRUS-357] – Exception thrown in MessageHandler#OnMessage is not caught in @OnError method [TYRUS-359] – Client based on Java 7 Asynchronous IO makes application unexitable Improvement [TYRUS-328] – JDK 1.7 AIO Client container – threads – (setting threadpool, limits, …) [TYRUS-332] – Consolidate shared client properties into one file. [TYRUS-337] – Create an SSL version of Basic Servlet test New Feature [TYRUS-228] – Add client support for HTTP Basic/Digest Task [TYRUS-330] – create/run tests/servlet/basic via wss [TYRUS-335] – [clustering] – introduce RemoteSession and expose them via separate method (not include remote sessions in the getOpenSessions()) [TYRUS-344] – Introduce Client support for HTTP Redirect

Read the article

DISA Cross Domain Enterprise Solutions on the NetBeans Platform

- by Geertjan

Bray 2.0 is a tool based on the NetBeans Platform that assists in creating valid Data Flow Configuration (DFC) files. The DFC Specification was developed to provide a standardized way for defining, validating, and approving data flows for use on cross-domain guarding solutions. A DFC document specifies key entities such as security domains, guards that facilitate data between security domains, data flows that describe how data travels between security domains, filters that transform and validate the data and more. Related info: http://www.disa.mil/Services/Information-Assurance/Cross-Domain-Solutions The Bray product is in development at Fulcrum IT (http://www.fulcrumco.com). The DFC Specification and Bray were developed in support of the US Department of Defense. Bray 2.0 marks the first release of Bray on the NetBeans Platform and utilizes a number of features that are core to the NetBeans Platform: Modular plugability. Bray consumers can integrate their own tools, file types, and more into the product with relative ease. Robust UI. The NetBeans Platform intuitive UI makes it easy to access and manipulate multiple aspects of a DFC. Explorer. The Explorer is a key component that makes the DFC XML easy to traverse, edit, and find errors. Context-sensitive help. JavaHelp can be readily integrated for the product as well as all the UI within. Editors. Any external file can be added to a DFC. Users can register their own editors or use the provided NetBeans editors to edit files. Printing. The NetBeans Platform Print API makes it easy to determine what should be printed and how. A screenshot: Bray 2.0 provides a lot of key features in developing valid, robust DFC files: XML validation. A DFC can be validated against the DFC schema specification. DFC Check List. An interactive, minimal guide for creating a complete DFC. Summary Window. The Summary Window functions like the Navigator in NetBeans IDE. The current "item of interest" is checked against various business rules and provides the ability to quickly find and fix errors. Change Log. Bray audits every change to a DFC and places them in a change log for users to peruse. Comments. Users can optionally add comments for other users to see. Digital signatures. DFC files can be digitally signed. A signature history and signature validation is provided in Bray. Pluggable security schemes. Bray ships with plain text and IC-ISM security schemes. If needed, users can integrate additional ones. ...and more to come! New features for Bray are constantly in development including use of the NetBeans Visual Library, language support, and more. More screenshots:

Read the article

Orchestrating the Virtual Enterprise, Part I

- by Kathryn Perry

A guest post by Jon Chorley, Oracle's Chief Sustainability Officer & Vice President, SCM Product Strategy During the American Industrial Revolution, the Ford Motor Company did it all. It turned raw materials into a showroom full of Model Ts. It owned a steel mill, a glass factory, and an automobile assembly line. The company was both self-sufficient and innovative and went on to become one of the largest and most profitable companies in the world. Nowadays, it's unusual for any business to follow this vertical integration model because its much harder to be best in class across such a wide a range of capabilities and services. Instead, businesses focus on their core competencies and outsource other business functions to specialized suppliers. They exchange vertical integration for collaboration. When done well, all parties benefit from this arrangement and the collaboration leads to the creation of an agile, lean and successful "virtual enterprise." Case in point: For Sun hardware, Oracle outsources most of its manufacturing and all of its logistics to third parties. These are vital activities, but ones where Oracle doesn't have a core competency, so we shift them to business partners who do. Within our enterprise, we always retain the core functions of product development, support, and most of the sales function, because that's what constitutes our core value to our customers. This is a perfect example of a virtual enterprise. What are the implications of this? It means that we must exchange direct internal control for indirect external collaboration. This fundamentally changes the relative importance of different business processes, the boundaries of security and information sharing, and the relationship of the supply chain systems to the ERP. The challenge is that the systems required to support this virtual paradigm are still mired in "island enterprise" thinking. But help is at hand. Developments such as the Web, social networks, collaboration, and rules-based orchestration offer great potential to fundamentally re-architect supply chain systems to better support the virtual enterprise. Supply Chain Management Systems in a Virtual Enterprise Historically enterprise software was constructed to automate the ERP - and then the supply chain systems extended the ERP. They were joined at the hip. In virtual enterprises, the supply chain system needs to be ERP agnostic, sitting above each of the ERPs that are distributed across the virtual enterprise - most of which are operating in other businesses. This is vital so that the supply chain system can manage the flow of material and the related information through the multiple enterprises. It has to have strong collaboration tools. It needs to be highly flexible. Users need to be able to see information that's coming from multiple sources and be able to react and respond to events across those sources. Oracle Fusion Distributed Order Orchestration (DOO) is a perfect example of a supply chain system designed to operate in this virtual way. DOO embraces the idea that a company's fulfillment challenge is a distributed, multi-enterprise problem. It enables users to manage the process and the trading partners in a uniform way and deliver a consistent user experience while operating over a heterogeneous, virtual enterprise. This is a fundamental shift at the core of managing supply chains. It forces virtual enterprises to think architecturally about how best to construct their supply chain systems. In my next post, I will share examples of companies that have made that shift and talk more about the distributed orchestration process.

Read the article

Columnstore Case Study #1: MSIT SONAR Aggregations

- by aspiringgeek

Preamble This is the first in a series of posts documenting big wins encountered using columnstore indexes in SQL Server 2012 & 2014. Many of these can be found in this deck along with details such as internals, best practices, caveats, etc. The purpose of sharing the case studies in this context is to provide an easy-to-consume quick-reference alternative. Why Columnstore? If we’re looking for a subset of columns from one or a few rows, given the right indexes, SQL Server can do a superlative job of providing an answer. If we’re asking a question which by design needs to hit lots of rows—DW, reporting, aggregations, grouping, scans, etc., SQL Server has never had a good mechanism—until columnstore. Columnstore indexes were introduced in SQL Server 2012. However, they're still largely unknown. Some adoption blockers existed; yet columnstore was nonetheless a game changer for many apps. In SQL Server 2014, potential blockers have been largely removed & they're going to profoundly change the way we interact with our data. The purpose of this series is to share the performance benefits of columnstore & documenting columnstore is a compelling reason to upgrade to SQL Server 2014. App: MSIT SONAR Aggregations At MSIT, performance & configuration data is captured by SCOM. We archive much of the data in a partitioned data warehouse table in SQL Server 2012 for reporting via an application called SONAR. By definition, this is a primary use case for columnstore—report queries requiring aggregation over large numbers of rows. New data is refreshed each night by an automated table partitioning mechanism—a best practices scenario for columnstore. The Win Compared to performance using classic indexing which resulted in the expected query plan selection including partition elimination vs. SQL Server 2012 nonclustered columnstore, query performance increased significantly. Logical reads were reduced by over a factor of 50; both CPU & duration improved by factors of 20 or more. Other than creating the columnstore index, no special modifications or tweaks to the app or databases schema were necessary to achieve the performance improvements. Existing nonclustered indexes were rendered superfluous & were deleted, thus mitigating maintenance challenges such as defragging as well as conserving disk capacity. Details The table provides the raw data & summarizes the performance deltas. Logical Reads (8K pages) CPU (ms) Durn (ms) Columnstore 160,323 20,360 9,786 Conventional Table & Indexes 9,053,423 549,608 193,903 ? x56 x27 x20 The charts provide additional perspective of this data. "Conventional vs. Columnstore Metrics" document the raw data. Note on this linear display the magnitude of the conventional index performance vs. columnstore. The “Metrics (?)” chart expresses these values as a ratio. Summary For DW, reports, & other BI workloads, columnstore often provides significant performance enhancements relative to conventional indexing. I have documented here, the first in a series of reports on columnstore implementations, results from an initial implementation at MSIT in which logical reads were reduced by over a factor of 50; both CPU & duration improved by factors of 20 or more. Subsequent features in this series document performance enhancements that are even more significant.

Read the article

Internet Explorer and margins

- by Hailwood

Hi there. I have some pretty simple html which is meant to make a layout as below. To push the tabs down from the userbar I am using margin-top: 35px; However in internet explorer the tabs are completly misaligned(the top of the tabs is where the bottom should be). So I need to use margin-top: -50px; for internet explorer. Why is this and how can I fix it without using a ie specific stylesheet <div id="pageHead"> <div id="userBar"> <span class="bold">Hi Matthew Hailwood | <a href="#">Logout</a> </div> <a href="http://localhost/buzz/" id="pageLogo"></a> <div id="pageTabs" class="clearfix"> <ul> <li><a href="http://localhost/buzzil/templates">Templates</a></li> <li><a href="http://localhost/buzzil/messaging">Messaging</a></li> <li><a href="http://localhost/buzzil/contacts">Contacts</a></li> </ul> </div> </div> With the css being #pageHead { height: 100px; } #pageLogo { float: left; width: 149px; height: 77px; margin-top: 11px; background: transparent url('../images/logo.png') no-repeat; } #userBar { text-align: right; color: #fff; margin-top: 10px; } #userBar a:link, #userBar a:visited, #userBar a:active { font-weight: normal; color: #E0B343; text-decoration: none; } .clearfix:after { content: "."; display: block; clear: both; visibility: hidden; line-height: 0; height: 0; } .clearfix { display: inline-block; } html[xmlns] .clearfix { display: block; } * html .clearfix { height: 1%; } #pageTabs { float: right; margin-top: 35px; } #pageTabs ul { position: relative; width: 100%; list-style: none; margin: 0; padding: 0; border-left: 1px solid #000; } #pageTabs ul li { float: right; background: url(../images/tabsBg.png) no-repeat 0% 0%; border-left: 1px solid #000; margin-left: -1px; } #pageTabs ul li a:link, #pageTabs ul li a:visited, #pageTabs ul li a:active { color: #fff; background: url(../images/tabsBg.png) no-repeat 100% 0%; display: block; font-size: 14px; font-weight: bold; line-height: 42px; text-transform: uppercase; padding: 4px 32px; text-decoration: none; } #pageTabs ul li a:hover, #pageTabs ul li a:focus { text-decoration: underline; }

Read the article

Collision detection via adjacent tiles - sprite too big

- by BlackMamba

I have managed to create a collision detection system for my tile-based jump'n'run game (written in C++/SFML), where I check on each update what values the surrounding tiles of the player contain and then I let the player move accordingly (i. e. move left when there is an obstacle on the right side). This works fine when the player sprite is not too big: Given a tile size of 5x5 pixels, my solution worked quite fine with a spritesize of 3x4 and 5x5 pixels. My problem is that I actually need the player to be quite gigantic (34x70 pixels given the same tilesize). When I try this, there seems to be an invisible, notably smaller boundingbox where the player collides with obstacles, the player also seems to shake strongly. Here some images to explain what I mean: Works: http://tinypic.com/r/207lvfr/8 Doesn't work: http://tinypic.com/r/2yuk02q/8 Another example of non-functioning: http://tinypic.com/r/kexbwl/8 (the player isn't falling, he stays there in the corner) My code for getting the surrounding tiles looks like this (I removed some parts to make it better readable): std::vector<std::map<std::string, int> > Game::getSurroundingTiles(sf::Vector2f position) { // converting the pixel coordinates to tilemap coordinates sf::Vector2u pPos(static_cast<int>(position.x/tileSize.x), static_cast<int>(position.y/tileSize.y)); std::vector<std::map<std::string, int> > surroundingTiles; for(int i = 0; i < 9; ++i) { // calculating the relative position of the surrounding tile(s) int c = i % 3; int r = static_cast<int>(i/3); // we subtract 1 to place the player in the middle of the 3x3 grid sf::Vector2u tilePos(pPos.x + (c - 1), pPos.y + (r - 1)); // this tells us what kind of block this tile is int tGid = levelMap[tilePos.y][tilePos.x]; // converts the coords from tile to world coords sf::Vector2u tileRect(tilePos.x*5, tilePos.y*5); // storing all the information std::map<std::string, int> tileDict; tileDict.insert(std::make_pair("gid", tGid)); tileDict.insert(std::make_pair("x", tileRect.x)); tileDict.insert(std::make_pair("y", tileRect.y)); // adding the stored information to our vector surroundingTiles.push_back(tileDict); } // I organise the map so that it is arranged like the following: /* * 4 | 1 | 5 * -- -- -- * 2 | / | 3 * -- -- -- * 6 | 0 | 7 * */ return surroundingTiles; } I then check in a loop through the surrounding tiles, if there is a 1 as gid (indicates obstacle) and then check for intersections with that adjacent tile. The problem I just can't overcome is that I think that I need to store the values of all the adjacent tiles and then check for them. How? And may there be a better solution? Any help is appreciated. P.S.: My implementation derives from this blog entry, I mostly just translated it from Objective-C/Cocos2d.

Read the article

SQL Server Optimizer Malfunction?

- by Tony Davis

There was a sharp intake of breath from the audience when Adam Machanic declared the SQL Server optimizer to be essentially "stuck in 1997". It was during his fascinating "Query Tuning Mastery: Manhandling Parallelism" session at the recent PASS SQL Summit. Paraphrasing somewhat, Adam (blog | @AdamMachanic) offered a convincing argument that the optimizer often delivers flawed plans based on assumptions that are no longer valid with today’s hardware. In 1997, when Microsoft engineers re-designed the database engine for SQL Server 7.0, SQL Server got its initial implementation of a cost-based optimizer. Up to SQL Server 2000, the developer often had to deploy a steady stream of hints in SQL statements to combat the occasionally wilful plan choices made by the optimizer. However, with each successive release, the optimizer has evolved and improved in its decision-making. It is still prone to the occasional stumble when we tackle difficult problems, join large numbers of tables, perform complex aggregations, and so on, but for most of us, most of the time, the optimizer purrs along efficiently in the background. Adam, however, challenged further any assumption that the current optimizer is competent at providing the most efficient plans for our more complex analytical queries, and in particular of offering up correctly parallelized plans. He painted a picture of a present where complex analytical queries have become ever more prevalent; where disk IO is ever faster so that reads from disk come into buffer cache faster than ever; where the improving RAM-to-data ratio means that we have a better chance of finding our data in cache. Most importantly, we have more CPUs at our disposal than ever before. To get these queries to perform, we not only need to have the right indexes, but also to be able to split the data up into subsets and spread its processing evenly across all these available CPUs. Improvements such as support for ColumnStore indexes are taking things in the right direction, but, unfortunately, deficiencies in the current Optimizer mean that SQL Server is yet to be able to exploit properly all those extra CPUs. Adam’s contention was that the current optimizer uses essentially the same costing model for many of its core operations as it did back in the days of SQL Server 7, based on assumptions that are no longer valid. One example he gave was a "slow disk" bias that may have been valid back in 1997 but certainly is not on modern disk systems. Essentially, the optimizer assesses the relative cost of serial versus parallel plans based on the assumption that there is no IO cost benefit from parallelization, only CPU. It assumes that a single request will saturate the IO channel, and so a query would not run any faster if we parallelized IO because the disk system simply wouldn’t be able to handle the extra pressure. As such, the optimizer often decides that a serial plan is lower cost, often in cases where a parallel plan would improve performance dramatically. It was challenging and thought provoking stuff, as were his techniques for driving parallelism through query logic based on subsets of rows that define the "grain" of the query. I highly recommend you catch the session if you missed it. I’m interested to hear though, when and how often people feel the force of the optimizer’s shortcomings. Barring mistakes, such as stale statistics, how often do you feel the Optimizer fails to find the plan you think it should, and what are the most common causes? Is it fighting to induce it toward parallelism? Combating unexpected plans, arising from table partitioning? Something altogether more prosaic? Cheers, Tony.

Read the article

Personal Financial Management – The need for resuscitation

- by Salil Ravindran

Until a year or so ago, PFM (Personal Financial Management) was the blue eyed boy of every channel banking head. In an age when bank account portability is still fiction, PFM was expected to incentivise customers to switch banks. It still is, in some emerging economies, but if the state of PFM in matured markets is anything to go by, it is in a state of coma and badly requires resuscitation. Studies conducted around the year show an alarming decline and stagnation in PFM usage in mature markets. A Sept 2012 report by Aite Group – Strategies for PFM Success shows that 72% of users hadn’t used PFM and worse, 58% of them were not kicked about using it. Of the rest who had used it, only half did on a bank site. While there are multiple reasons for this lack of adoption, some are glaringly obvious. While pretty graphs and pie charts are important to provide a visual representation of my income and expense, it is simply not enough to encourage me to return. Static representation of data without any insightful analysis does not help me. Budgeting and Cash Flow is important but when I have an operative account, a couple of savings accounts, a mortgage loan and a couple of credit cards help me with what my affordability is in specific contexts rather than telling me I just busted my budget. Help me with relative importance of each budget category so that I know it is fine to go over budget on books for my daughter as against going over budget on eating out. Budget over runs and spend analysis are post facto and I am informed of my sins only when I return to online banking. That too, only if I decide to come to the PFM area. Fundamentally, PFM should be a part of my banking engagement rather than an analysis tool. It should be contextual so that I can make insight based decisions. So what can be done to resuscitate PFM? Amalgamation with banking activities – In most cases, PFM tools are integrated into online banking pages and they are like chapter 37 of a long story. PFM needs to be a way of banking rather than a tool. Available balances should shift to Spendable Balances. Budget and goal related insights should be integrated with transaction sessions to drive pre-event financial decisions. Personal Financial Guidance - Banks need to think ground level and see if their PFM offering is really helping customers achieve self actualisation. Banks need to recognise that most customers out there are non-proficient about making the best value of their money. Customers return when they know that they are being guided rather than being just informed on their finance. Integrating contextual financial offers and financial planning into PFM is one way ahead. Yet another way is to help customers tag unwanted spending thereby encouraging sound savings habits. Mobile PFM – Most banks have left all those numbers on online banking. With access mostly having moved to devices and the success of apps, moving PFM on to devices will give it a much needed shot in the arm. This is not only about presenting the same wine in a new bottle but also about leveraging the power of the device in pushing real time notifications to make pre-purchase decisions. The pursuit should be to analyse spend, budgets and financial goals real time and push them pre-event on to the device. So next time, I should know that I have over run my eating out budget before walking into that burger joint and not after. Increase participation and collaboration – Peer group experiences and comments are valued above those offered by the bank. Integrating social media into PFM engagement will let customers share and solicit their financial management experiences with their peer group. Peer comparisons help benchmark one’s savings and spending habits with those of the peer group and increases stickiness. While mature markets have gone through this learning in some way over the last one year, banks in maturing digital banking economies increasingly seem to be falling into this trap. Best practices lie in profiling and segmenting customers, being where they are and contextually guiding them to identify and achieve their financial goals. Banks could look at the likes of Simple and Movenbank to draw inpiration from.

Read the article

Columnstore Case Study #1: MSIT SONAR Aggregations

- by aspiringgeek

Preamble This is the first in a series of posts documenting big wins encountered using columnstore indexes in SQL Server 2012 & 2014. Many of these can be found in this deck along with details such as internals, best practices, caveats, etc. The purpose of sharing the case studies in this context is to provide an easy-to-consume quick-reference alternative. Why Columnstore? If we’re looking for a subset of columns from one or a few rows, given the right indexes, SQL Server can do a superlative job of providing an answer. If we’re asking a question which by design needs to hit lots of rows—DW, reporting, aggregations, grouping, scans, etc., SQL Server has never had a good mechanism—until columnstore. Columnstore indexes were introduced in SQL Server 2012. However, they're still largely unknown. Some adoption blockers existed; yet columnstore was nonetheless a game changer for many apps. In SQL Server 2014, potential blockers have been largely removed & they're going to profoundly change the way we interact with our data. The purpose of this series is to share the performance benefits of columnstore & documenting columnstore is a compelling reason to upgrade to SQL Server 2014. App: MSIT SONAR Aggregations At MSIT, performance & configuration data is captured by SCOM. We archive much of the data in a partitioned data warehouse table in SQL Server 2012 for reporting via an application called SONAR. By definition, this is a primary use case for columnstore—report queries requiring aggregation over large numbers of rows. New data is refreshed each night by an automated table partitioning mechanism—a best practices scenario for columnstore. The Win Compared to performance using classic indexing which resulted in the expected query plan selection including partition elimination vs. SQL Server 2012 nonclustered columnstore, query performance increased significantly. Logical reads were reduced by over a factor of 50; both CPU & duration improved by factors of 20 or more. Other than creating the columnstore index, no special modifications or tweaks to the app or databases schema were necessary to achieve the performance improvements. Existing nonclustered indexes were rendered superfluous & were deleted, thus mitigating maintenance challenges such as defragging as well as conserving disk capacity. Details The table provides the raw data & summarizes the performance deltas. Logical Reads (8K pages) CPU (ms) Durn (ms) Columnstore 160,323 20,360 9,786 Conventional Table & Indexes 9,053,423 549,608 193,903 ? x56 x27 x20 The charts provide additional perspective of this data. "Conventional vs. Columnstore Metrics" document the raw data. Note on this linear display the magnitude of the conventional index performance vs. columnstore. The “Metrics (?)” chart expresses these values as a ratio. Summary For DW, reports, & other BI workloads, columnstore often provides significant performance enhancements relative to conventional indexing. I have documented here, the first in a series of reports on columnstore implementations, results from an initial implementation at MSIT in which logical reads were reduced by over a factor of 50; both CPU & duration improved by factors of 20 or more. Subsequent features in this series document performance enhancements that are even more significant.

Read the article

DBA Best Practices - A Blog Series: Episode 2 - Password Lists

- by Argenis

Digital World, Digital Locks One of the biggest digital assets that any company has is its secrets. These include passwords, key rings, certificates, and any other digital asset used to protect another asset from tampering or unauthorized access. As a DBA, you are very likely to manage some of these assets for your company - and your employer trusts you with keeping them safe. Probably one of the most important of these assets are passwords. As you well know, the can be used anywhere: for service accounts, credentials, proxies, linked servers, DTS/SSIS packages, symmetrical keys, private keys, etc., etc. Have you given some thought to what you're doing to keep these passwords safe? Are you backing them up somewhere? Who else besides you can access them? Good-Ol’ Post-It Notes Under Your Keyboard If you have a password-protected Excel sheet for your passwords, I have bad news for you: Excel's level of encryption is good for your grandma's budget spreadsheet, not for a list of enterprise passwords. I will try to summarize the main point of this best practice in one sentence: You should keep your passwords on an encrypted, access and version-controlled, backed-up, well-known shared location that every DBA on your team is aware of, and maintain copies of this password "database" on your DBA's workstations. Now I have to break down that statement to you: - Encrypted: what’s the point of saving your passwords on a file that any Windows admin with enough privileges can read? - Access controlled: This one is pretty much self-explanatory. - Version controlled: Passwords change (and I’m really hoping you do change them) and version control would allow you to track what a previous password was if the utility you’ve chosen doesn’t handle that for you. - Backed-up: You want a safe copy of the password list to be kept offline, preferably in long term storage, with relative ease of restoring. - Well-known shared location: This is critical for teams: what good is a password list if only one person in the team knows where it is? I have seen multiple examples of this that work well. They all start with an encrypted database. Certainly you could leverage SQL Server's native encryption solutions like cell encryption for this. I have found such implementations to be impractical, for the most part. Enter The World Of Utilities There are a myriad of open source/free software solutions to help you here. One of my favorites is KeePass, which creates encrypted files that can be saved to a network share, Sharepoint, etc. KeePass has UIs for most operating systems, including Windows, MacOS, iOS, Android and Windows Phone. Other solutions I've used before worth mentioning include PasswordSafe and 1Password, with the latter one being a paid solution – but wildly popular in mobile devices. There are, of course, even more "enterprise-level" solutions available from 3rd party vendors. The truth is that most of the customers that I work with don't need that level of protection of their digital assets, and something like a KeePass database on Sharepoint suits them very well. What are you doing to safeguard your passwords? Leave a comment below, and join the discussion! Cheers, -Argenis

Read the article

Bios Memory settings and Virtualization + Ubuntu (Unofficial Answers Welcome) [closed]

- by TardisGuy

Attempting to optimize my (Main Windowless) Ubuntu system for my uses I will detail questions below, I understand this might be the wrong place to ask these questions. If so, my apologies and I thank you so much for your patience. Thanks to all the volenteers that have helped me learn ubuntu over the years (Since 5.10) This is a "short" list of questions I have been trying to figure out for some time. If you feel you can answer one but not another, that's already more than I could ask for. I have wrote this up in a format for easy navigation to important points Hopefully to less annoy your eyes. You're welcome :) or i'm sorry i annoy you. :( If you would be so kind, Please format answers as follows: question 1: _ _ _ _ _ or question 1-a: _ _ _ _ _ If you want to simply link me to relevant information, rather than type up something really detailed; that would be more than awesome! Memory Specific Questions Goal: Maximizing memory bandwith to better perform in Virtualization, and Large file compression. (Possible conflict?) Ganged vs Unganged "which is better?"** is relative, i know. But what about ganged vs unganged - With or without Bank/channel interleaving? a: Speculation - If i understand correctly, "channel interleaving has something to do with using both channels to read or write in a kind of "striping" pattern, as opposed to a standard half duplex operation.(probably wrong) but wouldn't ganged channels make this irrelevant? Memory Interleaving(bank). Does it have a down side? Does it require a ratio of clocks? (If I run 4x4gig ddr3) a. If im reading correctly(trying to learn), this is designed to spread operations between latency cycles to work around the higher latency of "normal" operation. b. However it seems to me that it has to be: divisible by fractions of a master clock? So if i run memory at 1333mhz, then the mean between 2 (physical) banks would operate every (roughly) 600Mhz? Warning! Possibly utter nonsense: (1333/2 interleaving to act like 1 memory module per 2 sticks of a total of 4 sticks, meaning 2x channels@4) c. which makes me wonder if there would be left over clock cycles the system would have to... "truncate/balance" or something? But I'm certain theres a feature somewhere i don't understand. Virtualization Questions AMD-V - Option of IOMMU Turned it on, why do i have extra option of "64MB"? If IOMMU is on, but "64MB" is "disabled", Is it on? (have scoured google, I still dont know) a. I think i understand that its supposed to (kind of) "set aside" a part of ram to act as a faster interactive zone for "stuff" (usb, Graphics, and... what?) b. I am using Nvidia graphics on AMD (Used kernel option "iommu=pt iommu=1, pt "passthrough"? No idea what they do, found it on google to solve boot up issue) c. Will this option help me use low latency sound hardware, like my midi keyboard? Can you recommend any additional tweaks? a. sysctl settings? b. swap settings? Grats, youve reached the end. Thanks for Reading.

Read the article

What's new in Servlet 3.1 ? - Java EE 7 moving forward

- by arungupta

Servlet 3.0 was released as part of Java EE 6 and made huge changes focused at ease-of-use. The idea was to leverage the latest language features such as annotations and generics and modernize how Servlets can be written. The web.xml was made as optional as possible. Servet 3.1 (JSR 340), scheduled to be part of Java EE 7, is an incremental release focusing on couple of key features and some clarifications in the specification. The main features of Servlet 3.1 are explained below: Non-blocking I/O - Servlet 3.0 allowed asynchronous request processing but only traditional I/O was permitted. This can restrict scalability of your applications. Non-blocking I/O allow to build scalable applications. TOTD #188 provide more details about how non-blocking I/O can be done using Servlet 3.1. HTTP protocol upgrade mechanism - Section 14.42 in the HTTP 1.1 specification (RFC 2616) defines an upgrade mechanism that allows to transition from HTTP 1.1 to some other, incompatible protocol. The capabilities and nature of the application-layer communication after the protocol change is entirely dependent upon the new protocol chosen. After an upgrade is negotiated between the client and the server, the subsequent requests use the new chosen protocol for message exchanges. A typical example is how WebSocket protocol is upgraded from HTTP as described in Opening Handshake section of RFC 6455. The decision to upgrade is made in Servlet.service method. This is achieved by adding a new method: HttpServletRequest.upgrade and two new interfaces: javax.servlet.http.HttpUpgradeHandler and javax.servlet.http.WebConnection. TyrusHttpUpgradeHandler shows how WebSocket protocol upgrade is done in Tyrus (Reference Implementation for Java API for WebSocket). Security enhancements Applying run-as security roles to #init and #destroy methods Session fixation attack by adding HttpServletRequest.changeSessionId and a new interface HttpSessionIdListener. You can listen for any session id changes using these methods. Default security semantic for non-specified HTTP method in <security-constraint> Clarifying the semantics if a parameter is specified in the URI and payload Miscellaneous ServletResponse.reset clears any data that exists in the buffer as well as the status code, headers. In addition, Servlet 3.1 will also clears the state of calling getServletOutputStream or getWriter. ServletResponse.setCharacterEncoding: Sets the character encoding (MIME charset) of the response being sent to the client, for example, to UTF-8. Relative protocol URL can be specified in HttpServletResponse.sendRedirect. This will allow a URL to be specified without a scheme. That means instead of specifying "http://anotherhost.com/foo/bar.jsp" as a redirect address, "//anotherhost.com/foo/bar.jsp" can be specified. In this case the scheme of the corresponding request will be used. Clarification in HttpServletRequest.getPart and .getParts without multipart configuration. Clarification that ServletContainerInitializer is independent of metadata-complete and is instantiated per web application. A complete replay of What's New in Servlet 3.1: An Overview from JavaOne 2012 can be seen here (click on CON6793_mp4_6793_001 in Media). Each feature will be added to the JSR subject to EG approval. You can share your feedback to [email protected]. Here are some more references for you: Servlet 3.1 Public Review Candidate Downloads Servlet 3.1 PR Candidate Spec Servlet 3.1 PR Candidate Javadocs Servlet Specification Project JSR Expert Group Discussion Archive Java EE 7 Specification Status Several features have already been integrated in GlassFish 4 Promoted Builds. Have you tried any of them ? Here are some other Java EE 7 primers published so far: Concurrency Utilities for Java EE (JSR 236) Collaborative Whiteboard using WebSocket in GlassFish 4 (TOTD #189) Non-blocking I/O using Servlet 3.1 (TOTD #188) What's New in EJB 3.2 ? JPA 2.1 Schema Generation (TOTD #187) WebSocket Applications using Java (JSR 356) Jersey 2 in GlassFish 4 (TOTD #182) WebSocket and Java EE 7 (TOTD #181) Java API for JSON Processing (JSR 353) JMS 2.0 Early Draft (JSR 343) And of course, more on their way! Do you want to see any particular one first ?

Read the article

I.T. Chargeback : Core to Cloud Computing

- by Anand Akela

Contributed by Mark McGill Consolidation and Virtualization have been widely adopted over the years to help deliver benefits such as increased server utilization, greater agility and lower cost to the I.T. organization. These are key enablers of cloud, but in themselves they do not provide a complete cloud solution. Building a true enterprise private cloud involves moving from an admin driven world, where the I.T. department is ultimately responsible for the provisioning of servers, databases, middleware and applications, to a world where the consumers of I.T. resources can provision their infrastructure, platforms and even complete application stacks on demand. Switching from an admin-driven provisioning model to a user-driven model creates some challenges. How do you ensure that users provisioning resources will not provision more than they need? How do you encourage users to return resources when they have finished with them so that others can use them? While chargeback has existed as a concept for many years (especially in mainframe environments), it is the move to this self-service model that has created a need for a new breed of chargeback applications for cloud. Enabling self-service without some form of chargeback is like opening a shop where all of the goods are free. A successful chargeback solution will be able to allocate the costs of shared I.T. infrastructure based on the relative consumption by the users. Doing this creates transparency between the I.T. department and the consumers of I.T. When users are able to understand how their consumption translates to cost they are much more likely to be prudent when it comes to their use of I.T. resources. This also gives them control of their I.T. costs, as moderate usage will translate to a lower charge at the end of the month. Implementing Chargeback successfully create a win-win situation for I.T. and the consumers. Chargeback can help to ensure that I.T. resources are used for activities that deliver business value. It also improves the overall utilization of I.T. infrastructure as I.T. resources that are not needed are not left running idle. Enterprise Manager 12c provides an integrated metering and chargeback solution for Enterprise Manager Targets. This solution is built on top of the rich configuration and utilization information already available in Enterprise Manager. It provides metering not just for virtual machines, but also for physical hosts, databases and middleware. Enterprise Manager 12c provides metering based on the utilization and configuration of the following types of Enterprise Manager Target: Oracle VM Host Oracle Database Oracle WebLogic Server Using Enterprise Manager Chargeback, administrators are able to create a set of Charge Plans that are used to attach prices to the various metered resources. These plans can contain fixed costs (eg. $10/month/database), configuration based costs (eg. $10/month if OS is Windows) and utilization based costs (eg. $0.05/GB of Memory/hour) The self-service user provisioning these resources is then able to view a report that details their usage and helps them understand how this usage translates into cost. Armed with this information, the user is able to determine if the resources are delivering adequate business value based on what is being charged. Figure 1: Chargeback in Self-Service Portal Enterprise Manager 12c provides a variety of additional interfaces into this data. The administrator can access summary and trending reports. Summary reports allow the administrator to drill-down through the cost center hierarchy to identify, for example, the top resource consumers across the organization. Figure 2: Charge Summary Report Trending reports can be used for I.T. planning and budgeting as they show utilization and charge trends over a period of time. Figure 3: CPU Trend Report We also provide chargeback reports through BI Publisher. This provides a way for users who do not have an Enterprise Manager login (such as Line of Business managers) to view charge and usage information. For situations where a bill needs to be produced, chargeback can be integrated with billing applications such as Oracle Billing and Revenue Management (BRM). Further information on Enterprise Manager 12c’s integrated metering and chargeback: White Paper Screenwatch Cloud Management on OTN

Read the article

ADF page security - the untold password rule

- by ankuchak

I'm kinda new to Oracle ADF. So, in this blog post I'm going to share something with you that I faced (and recovered from) recently. Initially I thought if I should at all put a blog post on this, because it's totally simple. Still, simplicity is a relative term. So without wasting further time, let's kick off. I was exploring the ADF security aspect to secure a page through html basic authentication. The idea is very simple and the credential store etc. come into picture. But I was not able to run a successful test of this phenomenally simple thing even after trying for over 30 minutes. This is what I did. I created a simple jsf page and put a panel in it. And I put a simple el to show the current user name. Next I created a user that I should test with. I named the password as myuser, just to keep it simple. Then I created an enterprise role and mapped the user that I just created. Then I created an application role and mapped the enterprise role to it. Then I mapped the resource, the simple jsf page in this case, to this application role. This way, only users with the given application role can only access this page (as if you didn't know this duh!). Of course, I had to create the page definition for the page before I could map it to an application role. What else! done! Then I hit the run menu item and it all went well... Until... I got this message. I put the correct credentials repeatedly 2-3 times. Still I got the same error. Why? I didn't get any error message during the deployment. nope. Then, as I said before, I spent over 30 minutes trying different things out, things like mapping only the user(not the role) to the page, changing the context root etc. Nothing worked! Then of course, I bothered to look at the logs and found this. See the first red line. That says it all. So the problem was with that password. The password must have at least one special character and one digit in it. I think I was misled by the missing password hint/rule and the fact that the deployment didn't fail even if the user was not created properly. Well, yes, I agree that I was fool enough not to look at the logs. Later I changed the password to something like myuser123# . And it worked. I hope it helped.

Read the article

Concurrent Affairs

- by Tony Davis

I once wrote an editorial, multi-core mania, on the conundrum of ever-increasing numbers of processor cores, but without the concurrent programming techniques to get anywhere near exploiting their performance potential. I came to the.controversial.conclusion that, while the problem loomed for all procedural languages, it was not a big issue for the vast majority of programmers. Two years later, I still think most programmers don't concern themselves overly with this issue, but I do think that's a bigger problem than I originally implied. Firstly, is the performance boost from writing code that can fully exploit all available cores worth the cost of the additional programming complexity? Right now, with quad-core processors that, at best, can make our programs four times faster, the answer is still no for many applications. But what happens in a few years, as the number of cores grows to 100 or even 1000? At this point, it becomes very hard to ignore the potential gains from exploiting concurrency. Possibly, I was optimistic to assume that, by the time we have 100-core processors, and most applications really needed to exploit them, some technology would be around to allow us to do so with relative ease. The ideal solution would be one that allows programmers to forget about the problem, in much the same way that garbage collection removed the need to worry too much about memory allocation. From all I can find on the topic, though, there is only a remote likelihood that we'll ever have a compiler that takes a program written in a single-threaded style and "auto-magically" converts it into an efficient, correct, multi-threaded program. At the same time, it seems clear that what is currently the most common solution, multi-threaded programming with shared memory, is unsustainable. As soon as a piece of state can be changed by a different thread of execution, the potential number of execution paths through your program grows exponentially with the number of threads. If you have two threads, each executing n instructions, then there are 2^n possible "interleavings" of those instructions. Of course, many of those interleavings will have identical behavior, but several won't. Not only does this make understanding how a program works an order of magnitude harder, but it will also result in irreproducible, non-deterministic, bugs. And of course, the problem will be many times worse when you have a hundred or a thousand threads. So what is the answer? All of the possible alternatives require a change in the way we write programs and, currently, seem to be plagued by performance issues. Software transactional memory (STM) applies the ideas of database transactions, and optimistic concurrency control, to memory. However, working out how to break down your program into sufficiently small transactions, so as to avoid contention issues, isn't easy. Another approach is concurrency with actors, where instead of having threads share memory, each thread runs in complete isolation, and communicates with others by passing messages. It simplifies concurrent programs but still has performance issues, if the threads need to operate on the same large piece of data. There are doubtless other possible solutions that I haven't mentioned, and I would love to know to what extent you, as a developer, are considering the problem of multi-core concurrency, what solution you currently favor, and why. Cheers, Tony.

Read the article

Binding Image.Source to String in WPF ?

- by Mohammad

I have below XAML code : <Window x:Class="WpfApplication1.Window1" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" DataContext="{Binding RelativeSource={RelativeSource Self}}" WindowStartupLocation="CenterScreen" Title="Window1" Height="300" Width="300"> <Grid> <Image x:Name="TestImage" Source="{Binding Path=ImageSource}" /> </Grid> </Window> Also, there is a method that makes an Image from a Base64 string : Image Base64StringToImage(string base64ImageString) { try { byte[] b; b = Convert.FromBase64String(base64ImageString); MemoryStream ms = new System.IO.MemoryStream(b); System.Drawing.Image img = System.Drawing.Image.FromStream(ms); ////////////////////////////////////////////// //convert System.Drawing.Image to WPF image System.Drawing.Bitmap bmp = new System.Drawing.Bitmap(img); IntPtr hBitmap = bmp.GetHbitmap(); System.Windows.Media.ImageSource imageSource = System.Windows.Interop.Imaging.CreateBitmapSourceFromHBitmap(hBitmap, IntPtr.Zero, Int32Rect.Empty, BitmapSizeOptions.FromEmptyOptions()); Image wpfImage = new Image(); wpfImage.Source = imageSource; wpfImage.Width = wpfImage.Height = 16; ////////////////////////////////////////////// return wpfImage; } catch { Image img1 = new Image(); img1.Source = new BitmapImage(new Uri(@"/passwordManager;component/images/TreeView/empty-bookmark.png", UriKind.Relative)); img1.Width = img1.Height = 16; return img1; } } Now, I'm gonna bind TestImage to the output of Base64StringToImage method. I've used the following way : public string ImageSource { get; set; } ImageSource = Base64StringToImage("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").Source.ToString(); but nothing happen. How can I fix it ? BTW, I'm dead sure that the base64 string is correct

Read the article

HintPath vs ReferencePath in Visual Studio

- by toasteroven

What exactly is the difference between the HintPath in a .csproj file and the ReferencePath in a .csproj.user file? We're trying to commit to a convention where dependency DLLs are in a "releases" svn repo and all projects point to a particular release. Since different developers have different folder structures, relative references won't work, so we came up with a scheme to use an environment variable pointing to the particular developer's releases folder to create an absolute reference. So after a reference is added, we manually edit the project file to change the reference to an absolute path using the environment variable. I've noticed that this can be done with both the HintPath and the ReferencePath, but the only difference I could find between them is that HintPath is resolved at build-time and ReferencePath when the project is loaded into the IDE. I'm not really sure what the ramifications of that are though. I have noticed that VS sometimes rewrites the .csproj.user and I have to rewrite the ReferencePath, but I'm not sure what triggers that. I've heard that it's best not to check in the .csproj.user file since it's user-specific, so I'd like to aim for that, but I've also heard that the HintPath-specified DLL isn't "guaranteed" to be loaded if the same DLL is e.g. located in the project's output directory. Any thoughts on this?

Read the article

How to programmatically create customcontrol and change its values in Silverlight 4

- by user361317

Hi! I want to create a custom tabcontrol class which has an icon before the text, and I want to be able to change the icon in the constructor of the new tabcontrol. I use implicit styles in Silverlight 4, and the custom tabcontrol should not have any xaml of its own, just the class and the implicit xaml style in my App.xaml. I cannot, however, get this to work. This is my code:  20,0,0,0 <Style TargetType="controls:TabItem"> <Setter Property="IsTabStop" Value="False"/> <Setter Property="Background" Value="#FFDBEDFB"/> <Setter Property="BorderBrush" Value="#FFA3AEB9"/> <Setter Property="BorderThickness" Value="1"/> <Setter Property="Padding" Value="6,2,6,2"/> <Setter Property="HorizontalContentAlignment" Value="Stretch"/> <Setter Property="VerticalContentAlignment" Value="Stretch"/> <Setter Property="MinWidth" Value="5"/> <Setter Property="MinHeight" Value="5"/> <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="controls:TabItem"> <Grid x:Name="Root" Cursor="Hand" Height="25"> <VisualStateManager.VisualStateGroups> <VisualStateGroup x:Name="CommonStates"> <VisualStateGroup.Transitions> <VisualTransition GeneratedDuration="0"/> <VisualTransition GeneratedDuration="0:0:0.1" To="MouseOver"/> </VisualStateGroup.Transitions> <VisualState x:Name="Normal"/> <VisualState x:Name="MouseOver"> <Storyboard> <DoubleAnimationUsingKeyFrames BeginTime="0" Duration="00:00:00.001" Storyboard.TargetName="FocusVisualTop" Storyboard.TargetProperty="(UIElement.Opacity)"> <SplineDoubleKeyFrame KeyTime="0" Value="0"/> </DoubleAnimationUsingKeyFrames> </Storyboard> </VisualState> <VisualState x:Name="Disabled"> <Storyboard> <DoubleAnimationUsingKeyFrames Storyboard.TargetName="DisabledVisualTopSelected" Storyboard.TargetProperty="(UIElement.Opacity)"> <SplineDoubleKeyFrame KeyTime="0" Value="1"/> </DoubleAnimationUsingKeyFrames> <DoubleAnimationUsingKeyFrames Storyboard.TargetName="DisabledVisualTopUnSelected" Storyboard.TargetProperty="(UIElement.Opacity)"> <SplineDoubleKeyFrame KeyTime="0" Value="1"/> </DoubleAnimationUsingKeyFrames> </Storyboard> </VisualState> </VisualStateGroup> <VisualStateGroup x:Name="SelectionStates"> <VisualState x:Name="Unselected"/> <VisualState x:Name="Selected"/> </VisualStateGroup> <VisualStateGroup x:Name="FocusStates"> <VisualState x:Name="Focused"> <Storyboard> <ObjectAnimationUsingKeyFrames Duration="0" Storyboard.TargetName="FocusVisualTop" Storyboard.TargetProperty="Visibility"> <DiscreteObjectKeyFrame KeyTime="0" Value="Visible"/> </ObjectAnimationUsingKeyFrames> </Storyboard> </VisualState> <VisualState x:Name="Unfocused"> <Storyboard> <ObjectAnimationUsingKeyFrames Duration="0" Storyboard.TargetName="FocusVisualElement" Storyboard.TargetProperty="Visibility"> <DiscreteObjectKeyFrame KeyTime="0" Value="Collapsed"/> </ObjectAnimationUsingKeyFrames> </Storyboard> </VisualState> </VisualStateGroup> </VisualStateManager.VisualStateGroups> <Grid x:Name="TemplateTopUnselected" Margin="1"> <Border x:Name="BorderTop" BorderThickness="1,1,1,0"> <Border x:Name="GradientTop" BorderThickness="1,1,1,0" CornerRadius="5,5,0,0"> <Border.BorderBrush> <LinearGradientBrush EndPoint="0.5,1" StartPoint="0.5,0"> <GradientStop Color="#FFB1CCEE" Offset="0"/> <GradientStop Color="#CCB1CCEE" Offset="1"/> </LinearGradientBrush> </Border.BorderBrush> <Border.Background> <LinearGradientBrush EndPoint="0.5,1" StartPoint="0.5,0"> <GradientStop Color="#FFCEE0F7" Offset="0.091"/> <GradientStop Color="#FFDEECFD" Offset="0.996"/> <GradientStop Color="White"/> </LinearGradientBrush> </Border.Background> <Grid Margin="3,3,3,2"> <Grid.RowDefinitions> <RowDefinition Height="16"/> </Grid.RowDefinitions> <Grid.ColumnDefinitions> <ColumnDefinition Width="16"/> <ColumnDefinition/> <ColumnDefinition Width="15"/> </Grid.ColumnDefinitions> <Image x:Name="TabInactiveIcon" Source="group.png" Margin="0" HorizontalAlignment="Center" VerticalAlignment="Center" Opacity="0.395"/> <ContentControl x:Name="HeaderTopUnselected" Cursor="{TemplateBinding Cursor}" Margin="3,0" FontSize="{TemplateBinding FontSize}" Foreground="#FF416AA3" IsTabStop="False" FontFamily="Tahoma" Grid.Column="1" HorizontalAlignment="Center" VerticalAlignment="Center"/> <Button x:Name="TabInactiveCloseButton" Template="{StaticResource TabItemCloseButton}" Cursor="Hand" Height="10" HorizontalAlignment="Right" Margin="0" VerticalAlignment="Top" Width="10" Content="Button" Grid.Column="2" d:LayoutOverrides="GridBox"/> </Grid> </Border> </Border> <Border x:Name="DisabledVisualTopUnSelected" IsHitTestVisible="false" Opacity="0" Background="#8CFFFFFF" CornerRadius="3,3,0,0"/> </Grid> <Border x:Name="FocusVisualElement" Margin="-1" IsHitTestVisible="false" Visibility="Collapsed" BorderBrush="#FF6DBDD1" BorderThickness="1" CornerRadius="3,3,0,0"/> <Grid x:Name="TemplateTopSelected" Margin="0,0,0,-3" Visibility="Collapsed"> <Border x:Name="BorderTop1" BorderThickness="1,1,1,0"> <Border x:Name="GradientTop1" BorderThickness="1,1,1,0" CornerRadius="5,5,0,0"> <Border.BorderBrush> <LinearGradientBrush EndPoint="0.5,1" StartPoint="0.5,0"> <GradientStop Color="#FFB1CCEE" Offset="0"/> <GradientStop Color="#CAB1CCEE" Offset="1"/> </LinearGradientBrush> </Border.BorderBrush> <Border.Background> <LinearGradientBrush EndPoint="0.5,1" StartPoint="0.5,0"> <GradientStop Color="#FFCEE0F7" Offset="0.091"/> <GradientStop Color="White" Offset="0.974"/> <GradientStop Color="White"/> </LinearGradientBrush> </Border.Background> <Grid Margin="3,3,3,2"> <Grid.RowDefinitions> <RowDefinition Height="16"/> </Grid.RowDefinitions> <Grid.ColumnDefinitions> <ColumnDefinition Width="16"/> <ColumnDefinition/> <ColumnDefinition Width="15"/> </Grid.ColumnDefinitions> <Image x:Name="TabActiveIcon" Source="user.png" Margin="0" HorizontalAlignment="Center" VerticalAlignment="Center"/> <ContentControl x:Name="HeaderTopSelected" Cursor="{TemplateBinding Cursor}" Margin="3,0" FontSize="{TemplateBinding FontSize}" Foreground="#FF416AA3" IsTabStop="False" FontFamily="Tahoma" FontWeight="Bold" Grid.Column="1" HorizontalAlignment="Center" VerticalAlignment="Center"/> <Button x:Name="TabActiveCloseButton" Template="{StaticResource TabActiveCloseButton}" Cursor="Hand" Height="10" HorizontalAlignment="Right" Margin="0" VerticalAlignment="Top" Width="10" Content="Button" Grid.Column="2" d:LayoutOverrides="GridBox"/> </Grid> </Border> </Border> <Border x:Name="FocusVisualTop" Margin="-2,-2,-2,0" IsHitTestVisible="false" Visibility="Collapsed" BorderThickness="1,1,1,0" CornerRadius="3,3,0,0"/> <Border x:Name="DisabledVisualTopSelected" Margin="-2,-2,-2,0" IsHitTestVisible="false" Opacity="0" Background="#8CFFFFFF" CornerRadius="3,3,0,0"/> </Grid> </Grid> </ControlTemplate> </Setter.Value> </Setter> </Style> and my class public class ClosableTabItem : TabItem { public static readonly DependencyProperty TabIconProperty = DependencyProperty.RegisterAttached("TabInactiveIcon", typeof(Image), typeof(ClosableTabItem), null); public Image TabIcon { get { return (Image)GetValue(ClosableTabItem.TabIconProperty); } set { SetValue(ClosableTabItem.TabIconProperty, value); } } public ClosableTabItem(string header, ContentControl content, TabItemIcons icon) { // I need to be able to set the header, content and icon here } private Image GetTabIcon(TabItemIcons icon) { Image img = new Image(); switch (icon) { case TabItemIcons.User: img.Source = new BitmapImage(new Uri("/icons/user.png", UriKind.Relative)); break; case TabItemIcons.Group: img.Source = new BitmapImage(new Uri("/icons/group.png", UriKind.Relative)); break; default: break; } return img; } } This is driving me nuts, and I can't find any examples where anyone has done this without having a xaml page for the custom tab. Is this even possible? Can someone point me in the right direction? Cheers! - jonah

Search Results

Search found 3309 results on 133 pages for 'relative positioning'.

Page 100/133 | < Previous Page | 96 97 98 99 100 101 102 103 104 105 106 107 | Next Page >

- by MarkPearl

- by Soe Tun

- by Aaronaught

- by AjarnMark

- by James Michael Hare

- by Chris Smith

- by Pavel Bucek

- by Geertjan

- by Kathryn Perry

- by aspiringgeek

- by Hailwood

- by BlackMamba

- by Tony Davis

- by Salil Ravindran

- by aspiringgeek

- by Argenis

- by TardisGuy

- by arungupta

- by Anand Akela

- by ankuchak

- by Tony Davis

- by Mohammad

- by toasteroven

- by user361317

< Previous Page | 96 97 98 99 100 101 102 103 104 105 106 107 | Next Page >