Search Results

Search found 3147 results on 126 pages for 'rss feed'.

Page 100/126 | < Previous Page | 96 97 98 99 100 101 102 103 104 105 106 107  | Next Page >

• No digital audio output with Asus Xonar DG

  - by Lunatik

  I've purchased an Asus Xonar DG as replacement for faulty onboard audio in a Medion 8822 as it has an optical output which is all I really need to feed my HTPC. I uninstalled the previous drivers/devices, switched the PC off, inserted the Asus card, powered up, disabled the onboard audio in the BIOS, then installed the driver that came on the CD (same version as on Asus' website as of today) and everything went perfectly - no errors. I set the audio devices up in Windows and in the Asus utility (SPDIF enabled, 6-ch audio) as I would expect to see them work, but the only thing is I have no digital audio from test tones within Windows/the Asus utility, PCM audio or Dolby Digital from DVD. Analogue audio is fine. I've uninstalled things and reinstalled a couple of times now, as well as trying almost all combinations of analogue/digital outputs but can't get it sorted. Does anyone have any tips on how to get this working? This card has just been released so there isn't much out there to go on. Notes: The light on the toslink port is lit. OS is Vista 32-bit SP2 and all up to date, pretty much a fresh install with almost no 3rd party applications installed This page seems to suggest that a digital output device in Windows is not needed with Xonar cards as it was with the previous Realtek so I have it set to Analog. The only other output device is S/PDIF pass-thru

  Read the article

• #altnetseattle &ndash; REST Services

  - by GeekAgilistMercenary

  Below are the notes I made in the REST Architecture Session I helped kick off with Andrew. RSS, ATOM, and such needed for better discovery.  i.e. there still is a need for some type of discovery. Difficult is modeling behaviors in a RESTful way.  ??  Invoking some type of state against an object.  For instance in the case of a POST vs. a GET.  The GET is easy, comes back as is, but what about a POST, which often changes some state or something. Challenge is doing multiple workflows with stateful workflows.  How does batch work.  Maybe model the batch as a resource. Frameworks aren’t particularly part of REST, REST is REST.  But point argued that REST is modeled, or part of modeling a state machine of some sort… ? Nothing is 100% reliable w/ REST – comparisons drawn with TCP/IP.  Sufficient probability is made however for the communications, but the idea of a possible failure has to be built into the usage model of REST. Ruby on Rails / RESTfully, and others used.  What were their issues, what do they do.  ATOM feeds, object serialized, using LINQ to XML w/ this.  No state machine libraries. Idempotent areas around REST and single change POST changes are inherent in the architecture. REST – one of the constrained languages is for the interaction w/ the system.  Limiting what can be done on the resources.  - disagreement, there is no agreed upon REST verbs. Sam Ruby – RESTful services.  Expanded the verbs within REST/HTTP pushes you off the web.  Of the existing verbs POST leaves the most up for debate. Robert Reem used Factory to deal with the POST to handle the new state.  The POST identifying what it just did by the return. Different states are put into POST, so that new prospective verbs, without creating verbs for REST/HTTP can be used to advantage without breaking universal clients. Biggest issue with REST services is their lack of state, yet it is also one of their biggest strengths.  What happens is that the client takes up the often onerous task of handling all state, state machines, and other extraneous resource management.  All the GETs, POSTs, DELETEs, INSERTs get all pushed into abstraction.  My 2 cents is that this in a way ends up pushing a huge proprietary burden onto the REST services often removing the point of REST to be simple and to the point. WADL does provide discovery and some state control (sort of?) Statement made, "WADL" isn't needed.  The JSON, XML, or other client side returned data handles this. I then applied the law of 2 feet rule for myself and headed to finish up these notes, post to the Wiki, and figure out what I was going to do next.  For the original Wiki entry check it out here. I will be adding more to this post with a subsequent post.  Please do feel free to post your thoughts and ideas about this, as I am sure everyone in the session will have more for elaboration.

  Read the article

• Top 5 Mobile Apps To Keep Track Of Cricket Scores [ICC World Cup]

  - by Gopinath

  The ICC World Cup 2011 has started with a bang today and the first match between India vs Bangladesh was a cracker. India trashed Bangladesh with a huge margin, thanks to Sehwag for scoring an entertaining 175 runs in 140 runs. At the moment it’s very clear that whole India is gripped with cricket fever and so the rest of fans across the globe. Couple of days ago we blogged about how to watch live streaming of ICC cricket world cup online for free as well as top 10 websites to keep track live scores on your computers. What about tracking live cricket scores on mobiles phones? Here is our guide to top mobile apps available for Symbian(Nokia), Android, iOS and Windows mobiles. By the way, we are covering free apps alone in this post. Why to waste money when free apps are available? SnapTu – Symbian Mobile App SnapTu is a multi feature application that lets you to track live cricket scores, read latest news and check stats published on cric info. SnapTu has tie up with Cric Info and accessing all of CricInfo website on your mobile is very easy. Along with live scores, SnapTu also lets you access your Facebook, Twitter and Picassa on your mobile. This is my favourite application to track cricket on Symbian mobiles. Download SnapTu for your mobiles here Yahoo! Cricket – Symbian & iOS App Yahoo! Cricket Scores is another dedicated application to catch up with live scores and news on your Nokia mobiles and iPhones. This application is developed by Yahoo!, the web giant as well as the official partner of ICC. Features of the app at a glance Cricket: Get a summary page with latest scores, upcoming matches and details of the recent matches News: View sections devoted to the latest news, interviews and photos Statistics: Find the latest team and player stats Download Yahoo! Cricket For Symbian Phones   Download Yahoo! Cricket For iOS ESPN CricInfo – Android and iOS App Is there any site that is better than CricInfo to catch up with latest cricket news and live scores? I say No. ESPN CricInfo is the best website available on the web to get up to the minute  cricket information with in-depth analysis from cricket experts. The live commentary provided by CricInfo site is equally enjoyable as watching live cricket on TV. CricInfo guys have their official applications for Android mobiles and iOS devices and you accessing ball by ball updates on these application is joy. Download ESPN Crick Info App: Android Version, iPhone Version NDTV Cricket – Android, iOS and Blackberry App NDTV Cricket App is developed by NDTV, the most popular English TV news channel in India. This application provides live coverage of international and domestic cricket (Test, ODI & T20) along with latest News, Photos, Videos and Stats. This application is available for iOS devices(iPhones, iPads, iPod Touch), Android mobiles and Blackberry devices. Download NDTV Cricket for iOS here & here    Download NDTV Apps For Rest of OSs ECB Cricket – Symbian, iOS & Android App If you are an UK citizen then  this may be the right application to download for getting live cricket score updates as well as latest news about England Cricket Board. ECB Cricket is an official application of England Cricket Board Download ECB Cricket : Android Version, iPhone Version, Symbian Version Are there any better apps that we missed to feature in this list? This article titled,Top 5 Mobile Apps To Keep Track Of Cricket Scores [ICC World Cup], was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

• gpg symmetric encryption using pipes

  - by Thomas

  I'm trying to generate keys to lock my drive (using DM-Crypt with LUKS) by pulling data from /dev/random and then encrypting that using GPG. In the guide I'm using, it suggests using the following command: dd if=/dev/random count=1 | gpg --symmetric -a >./[drive]_key.gpg If you do it without a pipe, and feed it a file, it will pop up an (n?)curses prompt for you to type in a password. However when I pipe in the data, it repeats the following message four times and sits there frozen: pinentry-curses: no LC_CTYPE known assuming UTF-8 It also says can't connect to '/root/.gnupg/S.gpg-agent': File or directory doesn't exist, however I am assuming that this doesn't have anything to do with it, since it shows up even when the input is from a file. So I guess my question boils down to this: is there a way to force gpg to accept the passphrase from the command line, or in some other way get this to work, or will I have to write the data from /dev/random to a temporary file, and then encrypt that file? (Which as far as I know should be alright due to the fact that I'm doing this on the LiveCD and haven't yet created the swap, so there should be no way for it to be written to disk.)

  Read the article

• 5.1 surround sound on Acer Aspire 5738ZG with Ubuntu 11.10

  - by kbargais_LV

  I got a problem with sound. I tried everything but no results. :( I got 3 sound ports. my daemon: # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify # it under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 # USA. ## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for ## more information. Default values are commented out. Use either ; or # for ## commenting. ; daemonize = no ; fail = yes ; allow-module-loading = yes ; allow-exit = yes ; use-pid-file = yes ; system-instance = no ; local-server-type = user ; enable-shm = yes ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB ; lock-memory = no ; cpu-limit = no ; high-priority = yes ; nice-level = -11 ; realtime-scheduling = yes ; realtime-priority = 5 ; exit-idle-time = 20 ; scache-idle-time = 20 ; dl-search-path = (depends on architecture) ; load-default-script-file = yes ; default-script-file = /etc/pulse/default.pa ; log-target = auto ; log-level = notice ; log-meta = no ; log-time = no ; log-backtrace = 0 resample-method = speex-float-1 ; enable-remixing = yes ; enable-lfe-remixing = no flat-volumes = no ; rlimit-fsize = -1 ; rlimit-data = -1 ; rlimit-stack = -1 ; rlimit-core = -1 ; rlimit-as = -1 ; rlimit-rss = -1 ; rlimit-nproc = -1 ; rlimit-nofile = 256 ; rlimit-memlock = -1 ; rlimit-locks = -1 ; rlimit-sigpending = -1 ; rlimit-msgqueue = -1 ; rlimit-nice = 31 ; rlimit-rtprio = 9 ; rlimit-rttime = 1000000 ; default-sample-format = s16le ; default-sample-rate = 44100 ; default-sample-channels = 6 ; default-channel-map = front-left,front-right default-fragments = 8 default-fragment-size-msec = 10 ; enable-deferred-volume = yes ; deferred-volume-safety-margin-usec = 8000 ; deferred-volume-extra-delay-usec = 0

  Read the article

• Launch 7:Windows Phone 7 Style Live Tiles On Android Mobiles

  - by Gopinath

  Android is a great mobile OS but one thought that lingers in the mind of few Android owners is: Am I using a cheap iPhone? This is valid thought for many low end Android users as their phones runs sluggish and the user interface of Android looks like an imitation of iOS. When it comes to Windows Phone 7 users, even though their operating system features are not as great as iPhone/Android but it has its unique user interface; Windows Phone 7 user interface is a very intuitive and fresh, it’s constantly updating Live Tiles show all the required information on the home screen. Android has best mobile operating system features except UI and Windows Phone 7 has excellent user interface. How about porting Windows Phone 7 Tiles interface on an Android? That should be great. Launch 7 app brings the best of Windows Phone 7 look and feel to Android OS. Once the Launcher 7 app is installed and activated, it brings Live Tiles or constantly updating controls that show information on Android home screen. Apart from simple and smooth tiles, there are handful of customization options provided. Users can change colour of the tiles, add new tiles, enable/disable transitions. The reviews on Android Market are on the positive side with 4.4 stars by 10,000 + reviewers. Here are few user reviews 1. Does what it says. only issue for me is that the app drawer doesn’t rotate. And I would like the UI to rotate when my KB is opened. HTC desire z – Jonathan 2. Works great on atrix.Kudos to developers. Awesome. Though needs: Better notification bar More stock images of tiles Better fitting of widgets on tiles – Manny 3. Looks really good like it much more than I thought I would runs real smooth running royal ginger 2.1 – Jay 4. Omg amazing i am definetly keeping it as my default best of android and windows – Devon 5. Man! An update every week! Very very responsive developer! – Andrew You can read more reviews on Android Market here.  There is no doubt that this application is receiving rave reviews. After scanning a while through the reviews, few complaints throw light on the negative side: Battery drains a bit faster & Low end mobile run a bit sluggish. The application is available in two versions – an ad supported free version and $1.41 ad free version. Download Launcher 7 from Android Market This article titled,Launch 7:Windows Phone 7 Style Live Tiles On Android Mobiles, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

• How can I best manage making open source code releases from my company's confidential research code?

  - by DeveloperDon

  My company (let's call them Acme Technology) has a library of approximately one thousand source files that originally came from its Acme Labs research group, incubated in a development group for a couple years, and has more recently been provided to a handful of customers under non-disclosure. Acme is getting ready to release perhaps 75% of the code to the open source community. The other 25% would be released later, but for now, is either not ready for customer use or contains code related to future innovations they need to keep out of the hands of competitors. The code is presently formatted with #ifdefs that permit the same code base to work with the pre-production platforms that will be available to university researchers and a much wider range of commercial customers once it goes to open source, while at the same time being available for experimentation and prototyping and forward compatibility testing with the future platform. Keeping a single code base is considered essential for the economics (and sanity) of my group who would have a tough time maintaining two copies in parallel. Files in our current base look something like this: > // Copyright 2012 (C) Acme Technology, All Rights Reserved. > // Very large, often varied and restrictive copyright license in English and French, > // sometimes also embedded in make files and shell scripts with varied > // comment styles. > > > ... Usual header stuff... > > void initTechnologyLibrary() { > nuiInterface(on); > #ifdef UNDER_RESEARCH > holographicVisualization(on); > #endif > } And we would like to convert them to something like: > // GPL Copyright (C) Acme Technology Labs 2012, Some rights reserved. > // Acme appreciates your interest in its technology, please contact [email protected] > // for technical support, and www.acme.com/emergingTech for updates and RSS feed. > > ... Usual header stuff... > > void initTechnologyLibrary() { > nuiInterface(on); > } Is there a tool, parse library, or popular script that can replace the copyright and strip out not just #ifdefs, but variations like #if defined(UNDER_RESEARCH), etc.? The code is presently in Git and would likely be hosted somewhere that uses Git. Would there be a way to safely link repositories together so we can efficiently reintegrate our improvements with the open source versions? Advice about other pitfalls is welcome.

  Read the article

• How to download Vim script on the command-line?

  - by HaiYuan Zhang

  Whenever I want to install a new Vim script on the Linux server I'm working on, my typical workflow is as the following: surf the plugin's homepage in Vim online using FireXXXX download a right version of the plugin to my laptop by click some highlighted link upload the downloaded plugin from my laptop to Linux server using WinSCP which is really inconvenient. I don't know what is the magic behind this: I mean for the same hyperlink I click it in web browser. I can let you download it but use Wget plus the hyperlink in Linux command-line will end up with nothing but an error indication. Hyperlink in the web browser. Otherwise I can get the link in web browser and then use Wget or some similar tool to actually do the downloding. I try new cool Vim scripts quite ofte , so you can imagine my dismay when I have to repeat the tedious action all the time. What are some tips which can let me download the Vim scripts in a more "professional" way? Post edit: My problem is not find a tool like Wget or cURL. The problem I met is quite specific; to use these tools to download a Vim script. Let's take http://www.vim.org/scripts/script.php?script_id=30 as an example. It's the normal place where one can get the script, at least for me. But I can't find an working URL from this page that can feed to Wget.

  Read the article

• Serving and caching content from Amazon S3 with Tomcat

  - by Rob

  Hi all, We're looking to serve a range of content using Amazon S3 as a store for the content and Tomcat to host the web application. The content is divided into free and paid for content. We intend to authenticate the users when they access the web application running in Tomcat. Based around their authentication we are able to tell if the user has access to paid for content or simply free stuff. So I envision the flow of a request being something like this: Authenticated request to Tomcat If user is "paid" user, display links to premium content Direct requests for paid content back through Tomcat to prevent direct access to it by non-paying users. Tomcat makes request to S3 through a web cache to keep our costs down Content is returned to user. As we have to pay for each request to S3, I'd ideally like to cache content locally to the Tomcat instance after it has been requested for the first time to keep costs to a minimum and to speed things up. I would also like to be able to invalidate this cache if we publish fresh content to S3. So to confirm my proposal: Client Request - Tomcat - Web Cache - S3 To invalidate the cache, I was thinking of using something like PubSubHubbub with the cache waiting for updates to the feed for content that it should invalidate. I'd appreciate some general feedback on this approach as I've no real experience of caching and I'm sure I've made some invalid assumptions. I'd also appreciate any recommendations for caching technologies. Thanks.

  Read the article

• httpd 2.2.15 + suPHP + suExec + php5 = permission and information ?

  - by Prix

  Hi, i am currently playing around with suexec, suphp, php5 on my apache on slackware 13.1. Everything is installed and working properly but now i did like to got further into the directory permissions and at suphp settings and options available. initially i was planning to leave suphp disabled unless a virtualhost has it specified to be enabled but it does not seem to work, see sample: mod_php.conf which is included in my httpd.conf # # mod_php & mod_suPHP - PHP Hypertext Preprocessor module # # Load the PHP module: LoadModule php5_module lib/httpd/modules/libphp5.so # Load the suPHP module: LoadModule suphp_module lib/httpd/modules/mod_suphp.so <IfModule mod_php5.c> # Tell Apache to feed all *.php files through PHP. If you'd like to # parse PHP embedded in files with different extensions, comment out # these lines and see the example below. <FilesMatch \.php$> SetHandler application/x-httpd-php </FilesMatch> </IfModule> <IfModule mod_suphp.c> # This option tells mod_suphp if a PHP-script requested on this server (or # VirtualHost) should be run with the PHP-interpreter or returned to the # browser "as it is". suPHP_Engine off </IfModule> With the above first sample it makes suPHP and PHP not work if i comment out the php5 stuff but the module it will run just fine ... So my first question is, how could i possible make this setup work ? Leave suPHP disabled using php5 by default and if a virtualhost has suPHP enabled it will disable php5 and use suPHP. if any information is lacked here please let me know and i will update with any additional information you may need. Thanks in advance.

  Read the article

• Split MPEG video from command line?

  - by Tim

  I have a homemade DVD that I'm effectively trying to insert chapters into and rearrange - the original author burned it as one long chapter, and I'd like to rip it into smaller pieces and re-encode it into a new DVD. I ripped the DVD with the following command: mplayer dvd:// -dvd-device /dev/sr2 -dumpstream -dumpfile raw.vob I'm running Gentoo Linux with mplayer version 1.0-rc2_p20090731 (the latest available in Portage). I have a list of times that the chapters are supposed to span (for example 30:11-33:25), so my first thought was to rip the entire DVD and use mpgtx to cut out certain pieces of the file. My issue is that running mpgtx -i on the file reports quite a few timestamp jumps: Time stamps jumped from 59.753789 to 0.001622 at position 1d29800 Time stamps jumped from 204963823030450.343750 to 31.165900 at position 2d4f800 Time stamps jumped from 60.077878 to 0.001622 at position 43cc000 Time stamps jumped from 60.024233 to 0.001622 at position 65c5000 Time stamps jumped from 204963823068631.718750 to 52.549244 at position 7fd1000 I've tried to fix the indexes using: mencoder raw.vob -oac copy -ovc copy -forceidx -o fixed.vob -of mpeg But mpgtx will still report timestamp issues. My immediate question: is there a way to take the ripped movie I have and correct its timestamps so I can cut it with mpgtx? If I can get that one issue out of the way, building the rest of the DVD will be smooth sailing. If it's not possible to fix the timestamps on this file: is there a better way to rip small chunks of the DVD into separate files for recompilation later? I'd very much like this to be done on Linux, and it'd be even better if I could script it somehow (feed in a list of start and end positions, or start times and durations, and get out a series of ripped files). If need be, I also have a Mac OS X machine available, but no Windows. Edit: I wound up finding another solution involving HandBrake and ffmpeg (with help from this question), but the question stands. Edit again: Turns out my other solution didn't quite work - the audio desynchronized by about five seconds, in about half of my cut mpgs - so I'm back to square one. Anyone?

  Read the article

• Cache-control for permanent 301 redirects nginx

  - by gansbrest

  I was wondering if there is a way to control lifetime of the redirects in Nginx? We would liek to cache 301 redirects in CDN for specific amount of time, let say 20 minutes and the CDN is controlled by the standard caching headers. By default there is no Cache-control or Expires directives with the Nginx redirect. That could cause the redirect to be cached for a really long time. By having specific redirect lifetime the system could have a chance to correct itself, knowing that even "permanent" redirect change from time to time.. The other thing is that those redirects are included from the Server block, which according the nginx specification should be evaluated before locations. I tried to add add_header Cache-Control "max-age=1200, public"; to the bottom of the redirects file, but the problem is that Cache-control gets added twice - first comes let say from the backend script and the other one added by the add_header directive.. In Apache there is the environment variable trick to control headers for rewrites: RewriteRule /taxonomy/term/(\d+)/feed /taxonomy/term/$1 [R=301,E=expire:1] Header always set Cache-Control "store, max-age=1200" env=expire But I'm not sure how to accomplish this in Nginx.

  Read the article

• how to download vim script in command line

  - by HaiYuan Zhang

  whenever I want to install a new vim script to the linux server I'm working in , my typical workflow is as the following: surf the plugin's homepage in vim online using fireXXXX download a right version of the plugin to my laptop by click some highlighted link upload the downloaded plugin from my laptop to linux server using winscp which is really inconvenient. I don't know what is the magic behind this : I mean for the same hyperlinki click it in web browser I can let you download it but use wget plus the hyperlink in linux commandline will end up with nothing but error indication. hyperlink in web browser . otherwise I can get the link in web browser and then use wget or some similar tool to actually do the downloding. I try new cool vim scripts quite often , so you can imagin my dismay when have to repeat the tedious action all the time. So if anyone of you knows some tips which can let me downloading the vim scripts in a more "professional" way, I'll appreciate it a lot. post edit : My problem is not find a tool like wget or curl . The problem I met is quite specific to use these tools to download vim script. let's take http://www.vim.org/scripts/script.php?script_id=30 as an example, it's the normal place where one can get the script, at least for me. but I can't find an working url from this page that can feed to wget .

  Read the article

• More Free Apps Bound for the Marketplace

  - by Scott Kuhl

  Microsoft has announced they are raising the limit of free applications a developer can submit from 5 to 100.  But what does that really mean? First, lets look at the reason for the limitation.  The iTunes Store and the Android Market both have a lot more applications available than the Windows Phone Marketplace.  But that says nothing about the quality of those applications.  I attended a couple of pre-launch events and Microsoft representatives were clearly told to send a message. We don’t want a bunch of junky applications that do nothing but spam the marketplace.  That was the reason for the 5 free application limit. Okay, so now what has the result been?  Well, there are still fart apps, but there is no sign of a developer flooding the marking with 1500 wallpaper applications or 1000 of the same application all pointed at different RSS feeds.   On the other hand there are developers who want to release real free apps but are constrained by the 5 app limit. So why did Microsoft change it’s mind?  Is it to get the count of applications up, or is to make developers happy?  Windows Phone Marketplace is growing fast but it’s a long way behind the other guys.   I don’t think Microsoft wants to have 100,000 apps show up in the next 3 months if they are loaded with copy cat apps.  Those numbers will get picked apart quickly and the press will start complaining about  the same problems the Android Market has.  I do think the bump was at developer request.  Microsoft is usually good about listening to developer feedback, but has been pretty slow about it at times.  And from a financial perspective, there will me more apps that Microsoft has to review that they will see no profit on.  At least not until they bake in a advertising model connected to Bing. Ultimately, what does this mean for the future? Well, there are developers out there looking to release more than 5 simple free apps, so I think we will see more hobby apps.  And there are developers out there trying to make money from advertising instead of sales, so I think we will see more of those also.  But the category that I think will grow the fastest is free versions of paid applications that are the same as the trial version of the application.  While technically that makes no sense, its purely a marketing move.  Free apps get downloaded a lot more than paid apps, even with a trial mode.  It always surprises me how little consumers are willing to spend on mobile apps.  How many reviews of applications have you seen that says something like “a bit pricey at $1.99”.  Really?  Have you looked at how much you spend on your phone and plan?  I always thought the trial mode baked into Windows Marketplace was a good idea.  So I’m not sure how the more open free market will play out. In the long run though, I won’t be surprised to see a Bing ad mobile ad model show up so Microsoft can capitalize on the more open and free Windows Marketplace. Bonus: The Oatmeal on How I Feel About Buying Apps

  Read the article

• Disconnect from PHP after output generated

  - by Oli

  I have a LEMP stack. Nginx sitting in front of PHP-FPM. Because some of the sites are heavy and there's OPCode caching, PHP is set up so that there are only 5 child processes running. The aim being that each child can deal with any request in less than half-a-second and then move onto the next request. One problem I've found is that if it's a big chunk of HTML that's getting sent out, and the user has a slow connection, that PHP thread stays occupied until they've finished downloading. Because of my current setup, I have a pretty unforgiving timeout inside PHP where the script is killed after 20 seconds. This is to make sure everybody gets a turn but on a slow connection, this can mean the user gets cut off with a 504 Gateway timeout. I was wondering if there was some sort of buffer solution that I could implement within or just behind Nginx that sent the request through and then... well... buffered the content into its own cache and feed that onto the client as and when they could download it. The aim being that the underlying PHP thread can be freed up. What I'm asking for doesn't have to be PHP-specific. Anything that deals with FastCGI, or even any Nginx-upstream might have a similar issue to this.

  Read the article

• Best shortcut in Total Commander

  - by life-warrior

  So, what's your favourite TC shortcut or shortcut combination ? Which one do you use and for what purpose ? Among my most often used: Ctrl-Left ( or Ctrl-Right ) - open archive or folder under cursor in opposite tab. Ctrl-Shift-Enter, Alt-F8, Ctrl-X - copy full file path to clipboard. Shift-F6, Shift-End(if needed), Ctrl-C - copy only file name w/o path. Select files, Ctrl-M - multi-rename, for example remove "DVDrip" from file names. Ctrl-\ - go to root directory. Ctrl-D, - go to directory with highlighted letter specified. For example, name a downloads directory "&Downloads" in favourites, and the letter after ampersand will be highlighted. Alt-F7, feed to listbox, Ctrl-A, Mark(menu)-Save selection to file - creates a file with all files and directories inside current, with full path. Ctrl-[3-6] - sort files by name(3), extension(4), date(5), size(6). For example, Sort by name, when you need movies and soundracks with the same name and different extension to group them together. Sort by extension, when you need to find EXEs in Windows directory. Sort by Date, when you need to find the latest file downloaded in your dir. Sort by size, when you need to delete the largest files for free space.

  Read the article

• Using a named pipe to simulate a serial port on a VMware virtual machine (linux host and client)

  - by Dave M

  Trying to write a python program to create a simulated data stream and feed it, through a named pipe, to a VMware virtual machine. The host is running Ubuntu 11.10 and VMware player 5.0.0. The Vm is running Ubuntu netbook 10.04. I am able to get the pipe working on the local machine but I am not able to get the pipe to pass data through the virtual serial port to the programs running on the virtual machine. #!/usr/bin/python import os # # Create a named pipe that will be used as the serial port on a VMware virtual machine SerialPipe = '/tmp/gpsd2NMEA' try: os.unlink(SerialPipe) except: pass os.mkfifo(SerialPipe) # # Open the named pipe NMEApipe = os.open(SerialPipe, os.O_RDWR|os.O_NONBLOCK) # # Write a string to the named pipe NMEAtime = "235959" os.write(NMEApipe, str( '%s\n' % NMEAtime )) Test to see if the python program is working on the host machine (displays 235959 if data is passing through the pipe) $ cat /tmp/gpsd2NMEA 235959 Serial port as defined in the VMware .vmx file: serial0.present = "TRUE" serial0.startConnected = "TRUE" serial0.fileType = "pipe" serial0.fileName = "/tmp/gpsd2NMEA" serial0.pipe.endPoint = "client" serial0.autodetect = "FALSE" serial0.tryNoRxLoss = "TRUE" serial0.yieldOnMsrRead = "TRUE" Test to see if the serial port in the VM is receiving data $ cat /dev/ttyS0 or $ minicom -D /dev/ttyS0 or $ stty -F /dev/ttyS0 cs8 -parenb -cstopb 115200 $ echo < /dev/ttyS0 None of these display any data from the python program.

  Read the article

• What is the sysadmin's dream network printer? 6-8k pg/mo. Xerox, OkiData, Lexmark and HP are all fail

  - by Jacob

  How do I find out what printer brand and/or type doesn't suck? This information is hard to find and manufacturer's websites won't reveal any issues with certain printers. After 10 years of dealing with network shared printers, I can't say that I have been impressed with any of the printer brands I've seen. Brother's little laser MFPs have been close to ideal for low volume, but that is it, period. OkiData, Lexmark, HP, Xerox solid ink printers, they all sucked in one way or another. Currently I'm looking to replace a Xerox ColorQube 8570 because it fails to print on a regular basis. Sometimes it doesn't even boot VxWorks fully - it just hangs at 2% or whatever. I've used Xerox 8860MFPs and they sucked just as bad. I won't talk about ink jets here, that's most likely not what I'm looking for. We currently spend about $4k on paper and ink per year for this printer at up to 6-8k pages per month, letter, mostly black and white, low color usage. I want the printer to feed paper correctly, not crash and burn when a PDF isn't according to its taste (my favorite Xerox problem here) and with decent drivers for Windows and OS X. Print quality is not of the utmost importance but paper does get sent to customers.

  Read the article

• How can I proxy multiple LDAP servers, and still have grouping of users on the proxy?

  - by Chris

  I have 2 problems that I'm hoping to find a common solution to. First, I need to find a way to have multiple LDAP servers (Windows AD's across multiple domains) feed into a single source for authentication. This is also needed to get applications that can't natively talk to more than one LDAP server to work. I've read this can be done with Open LDAP. Are there other solutions? Second, I need to be able to add those users to groups without being able to make any changes to the LDAP servers I'm proxying. Lastly, this all needs to work on Windows Server 2003/2008. I work for a very large organization, and to create multiple groups and have large numbers of users added to, moved between, and removed from them is no small task. This normally requires tons of paperwork and a lot of time. Time is the one thing we don't normally have; dodging the paperwork is just a plus. I have very limited experience in all this, so I'm not even sure what I'm asking will make sense. Atlassian Crowd comes close to what we need, but falls short of having it's own LDAP front end. Can anyone provide any advice or product names? Thanks for any help you can provide.

  Read the article

• Weirdly high ping on direct ethernet connection?

  - by Antriel

  I bought new Lenovo IdeaCentre H430 pc and I'm having problem with high pings. Windows 7 with on-board realtek NIC. Fresh install, fully updated, drivers installed from included CD. When I start pinging router (direct 1Gb ethernet connection, 1 hop), pings start at <1ms (which is fine) and after a while they jump to 300-1000ms. I loaded up live ubuntu to test if the problem might be in HW. It's not, in ubuntu pings were always <1ms. I also noticed that when I start using connection somehow, pings go down to 1ms, but go back up when I stop using it (tested by accessing live camera feed on LAN). Power Options set to max performance. I disabled Interrupt Moderation on the NIC, didn't help. I tested it in the safe mode with networking, same problem there. It slows down our client-server based programs and I have no idea what's causing it. All I could google up was that disabling Interrupt Moderation would help, it didn't though. Anyone had similar problems? tl;nr: Computer is giving high pings to router when idle and normal pings when network is under load, it slows down our software significantly.

  Read the article

• How can I connect my Xbox to my Mac on my network

  - by codecowboy

  I have a wireless router/modem (Router 1) in my living room. This is connected to the internet (cable). Wireless is disabled as the router has a terrible wireless range. My Xbox is connected via ethernet to Router 1. Another LAN output from Router 1 connects to a powerline adapter. Router 1 acts as a DHCP server on 192.168.0.x and has the IP 192.168.0.1 In a second room I have Router 2. This has the powerline feed from Router 1 going into the WAN socket. This router runs the Tomato Firmware and acts as a wireless router for the rest of the house using the IP range 192.168.1.x. Router 2 IP is 192.168.1.1. My Mac is connected to Router 2 using a LAN cable and has the IP 192.168.0.133. Several mobile devices need wireless access. I want an ethernet connection to my Mac, not wireless. I should be able to use software like Connect360 to share media from my Mac to the XBox but the XBox does not see my Mac. I can ping 192.168.0.1 from the Mac. Is this possible using my current setup? If so, how?

  Read the article

• How to download Vim script on the command-line?

  - by HaiYuan Zhang

  Whenever I want to install a new Vim script on the Linux server I'm working on, my typical workflow is as the following: surf the plugin's homepage in Vim online using FireXXXX download a right version of the plugin to my laptop by click some highlighted link upload the downloaded plugin from my laptop to Linux server using WinSCP which is really inconvenient. I don't know what is the magic behind this: I mean for the same hyperlink I click it in web browser. I can let you download it but use Wget plus the hyperlink in Linux command-line will end up with nothing but an error indication. Hyperlink in the web browser. Otherwise I can get the link in web browser and then use Wget or some similar tool to actually do the downloding. I try new cool Vim scripts quite ofte , so you can imagine my dismay when I have to repeat the tedious action all the time. What are some tips which can let me download the Vim scripts in a more "professional" way? Post edit: My problem is not find a tool like Wget or cURL. The problem I met is quite specific; to use these tools to download a Vim script. Let's take http://www.vim.org/scripts/script.php?script_id=30 as an example. It's the normal place where one can get the script, at least for me. But I can't find an working URL from this page that can feed to Wget.

  Read the article

• Wordpress Forbidden page

  - by ffffff

  HTML without a body part is null If I read preview mode in (there is no authority) without logging in The response html is this.. <html xmlns="http://www.w3.org/1999/xhtml" lang="ja" xml:lang="ja"> <head profile="http://purl.org/net/ns/metaprof"> <meta http-equiv="Content-Type" content="text/html; charset=UTF-8" /> <meta http-equiv="Content-Script-Type" content="text/javascript" /> <meta name="generator" content="WordPress 2.9.2" /> <meta name="author" content="blog" /> <link rel="alternate" type="application/atom+xml" href="http://blog.example.com/feed/atom/" title="Atom cite contents" /> <link rel="start" href="http://blog.example.com" title="blog Home" /> <link rel="stylesheet" type="text/css" href="http://blog.example.com/wp-content/themes/blog/style.css" /> <meta name="description" content="blog" /> <title>blog - </title> </head> <body class="individual single"> </div> </body> </html> Do you have any solutions?

  Read the article

• Converting Audio To Video Output and Attaching Text?

  - by ZeeMan

  I am currently working on a project and before i get started i thought it'd be nice to check with stackOverflow community, and see maybe they can help me with this. The Idea: I have about a thousand MP3 files that i need to convert into Video files to be upload on Youtube for my work. Here is where it gets tricky i need to also attach the Text associated with the Audio to the Video as an Image. I was thinking .ppt. The Problem: I can do this one audio file at a time but it would take me a zillion years. lol!! The Question: Can I Create Some Kind Of Program Using Let's Say XML or JavaScript Or XHTML or some other programming language to do a MASS content creation and all i have to do is feed it the Information?? possibly a script?? or is it possible to create an example .ppt file and then hack it so that i can have it reproduce itself with different information?? The Note: Thanks U In Advance For Helping Out!!! Regards, ZeeMan!!!

  Read the article

• How do I get 5.1 surround sound working on an Acer Aspire 5738ZG?

  - by kbargais_LV

  I got a problem with sound. I tried everything but no results. :( I got 3 sound ports. my daemon: # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify # it under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 # USA. ## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for ## more information. Default values are commented out. Use either ; or # for ## commenting. ; daemonize = no ; fail = yes ; allow-module-loading = yes ; allow-exit = yes ; use-pid-file = yes ; system-instance = no ; local-server-type = user ; enable-shm = yes ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB ; lock-memory = no ; cpu-limit = no ; high-priority = yes ; nice-level = -11 ; realtime-scheduling = yes ; realtime-priority = 5 ; exit-idle-time = 20 ; scache-idle-time = 20 ; dl-search-path = (depends on architecture) ; load-default-script-file = yes ; default-script-file = /etc/pulse/default.pa ; log-target = auto ; log-level = notice ; log-meta = no ; log-time = no ; log-backtrace = 0 resample-method = speex-float-1 ; enable-remixing = yes ; enable-lfe-remixing = no flat-volumes = no ; rlimit-fsize = -1 ; rlimit-data = -1 ; rlimit-stack = -1 ; rlimit-core = -1 ; rlimit-as = -1 ; rlimit-rss = -1 ; rlimit-nproc = -1 ; rlimit-nofile = 256 ; rlimit-memlock = -1 ; rlimit-locks = -1 ; rlimit-sigpending = -1 ; rlimit-msgqueue = -1 ; rlimit-nice = 31 ; rlimit-rtprio = 9 ; rlimit-rttime = 1000000 ; default-sample-format = s16le ; default-sample-rate = 44100 ; default-sample-channels = 6 ; default-channel-map = front-left,front-right default-fragments = 8 default-fragment-size-msec = 10 ; enable-deferred-volume = yes ; deferred-volume-safety-margin-usec = 8000 ; deferred-volume-extra-delay-usec = 0

  Read the article

< Previous Page | 96 97 98 99 100 101 102 103 104 105 106 107  | Next Page >