Search Results

Search found 11180 results on 448 pages for 'serial port'.

Page 100/448 | < Previous Page | 96 97 98 99 100 101 102 103 104 105 106 107  | Next Page >

• Remotely viewing IP camera on Belkin N450 DB router

  - by Mike Miller

  I need to setup a wireless IP camera (Trendnet TV-IP501W) on my network so that it is remotely visible from anywhere. Right now I successfully connected it to my home network but nothing else. My router is a Belkin N450 DB. Any help would be much appreciated, including what this would be referred to as so I could more easily ask another forum. I believe it is something like "port forwarding" but I'm not sure. Ok, I believe I found this in the "virtual servers" section. It asks for enabling with a check box, description, inbound port, type, private IP, & private port. In that order I have checked enabling, "camera", 150, TCP, 81, and 81? I'm assuming inbound ports are the numbers I use for the home network - xxx.xxx.x.150 and the 81 was for private. I used my WAN IP and added :81 and .81 but didn't get it. What am I doing wrong? Ok, I believe I found this in the "virtual servers" section. It asks for enabling with a check box, description, inbound port, type, private IP, & private port. In that order I have checked enabling, "camera", 150, TCP, 81, and 81? I'm assuming inbound ports are the numbers I use for the home network - xxx.xxx.x.150 and the 81 was for private. I used my WAN IP and added :81 and .81 but didn't get it. What am I doing wrong?

  Read the article

• No Internet for Created VLan on Cisco CE500

  - by Jennifer

  I'm new here and also with networking but i can't set internet conection for some vlan created. I have a Cisco CE500 switch and created 4 vlans define by the roles in the switch. Vlan 2: Servers (role) (port 3-4) Vlan 3: Desktop (role) (port 5-8) Vlan 4: Guest (role) (port 9-12) Vlan 1 is default, Connect to the ADSL Modem/Router Port 2 assign to the Router Role (vlan 1) The switch is connected on port2 the ADSL Modem (DHCP) 192.168.2.254 The goal is: All Vlan should have internet connection. Vlan 2 and 3 should see each other but not Vlan 4 I can enter the switch CLI but dont know which command to enter. Thanks 4 ur time and replies Jennifer

  Read the article

• Upgrading from php 5.3 to php 5.4 with Macport

  - by dr.stonyhills

  PHP5.4 has been available for sometime now and Macport recently caught up with the release of port php54 but the process of upgrading is not as clear as possible. Even worst for those who are new to maintaining multiple versions of PHP on the same machine. I am keen on trying out some of the new features in PHP5.4 like traits, new array form etc but falling back on to php5.3 for other compatibility stuff. So i sudo port install php5+ (all the variants, apache2 etc) Then i tell it what PHP port to use as default sudo port select --set php php54 Check what version of PHP is active in the terminal using php -v outputs php 5.4.3. But i seem to be having issues with choosing the right non cli version as in the version of the module run by apache etc is still php5.3.12. Do i have to change the reference to the libphp5 in apache httpd.conf? Any advice on the right workflow for switching between php version on macport greatly appreciated!

  Read the article

• trouble running multiple domains on tomcat behind apache via mod_jk

  - by mkoryak

  I am having trouble setting up tomcat6 with 2 virtual hosts, behind apache2. if i have just one host defined in tomcat, and one jk worker, everything works fine. as soon as i define another jk worker and a corresponding tomcat host i get this error in jk.log: 9:3075328656] [info] ajp_connect_to_endpoint::jk_ajp_common.c (922): Failed opening socket to (69.164.218.75:8009) (errno=111) [Tue Feb 08 03:08:13 2011] [17159:3075328656] [error] ajp_send_request::jk_ajp_common.c (1507): (dogself) connecting to backend failed. Tomcat is probably not started or is listening on the wrong port (errno=111) [Tue Feb 08 03:08:13 2011] [17159:3075328656] [info] ajp_service::jk_ajp_common.c (2447): (dogself) sending request to tomcat failed (recoverable), because of error during request sending (attempt=2) [Tue Feb 08 03:08:13 2011] [17159:3075328656] [error] ajp_service::jk_ajp_common.c (2466): (dogself) connecting to tomcat failed. [Tue Feb 08 03:08:13 2011] [17159:3075328656] [info] jk_handler::mod_jk.c (2615): Service error=-3 for worker=dogself my tomcat server.xml looks like this: <Service name="Catalina"> <Connector port="8080" protocol="HTTP/1.1" connectionTimeout="20000" URIEncoding="UTF-8" redirectPort="8443" /> <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" /> <Engine name="Catalina" defaultHost="dogself.com"> <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/> <Host name="dogself.com" appBase="webapps-dogself" unpackWARs="true" autoDeploy="true" xmlValidation="false" xmlNamespaceAware="false"> </Host> <Host name="nousophia.com" appBase="webapps-test" unpackWARs="true" autoDeploy="true" xmlValidation="false" xmlNamespaceAware="false"> </Host> </Engine> </Service> my workers.properties looks like this: # workers.properties - ajp13 # # List workers worker.list=dogself,nousophia # Define dogself worker.dogself.port=8009 worker.dogself.host=dogself.com worker.dogself.type=ajp13 worker.nousophia.port=8009 worker.nousophia.host=nousophia.com worker.nousophia.type=ajp13 tomcat is started/restarted i followed these directions for setting it up: http://stackoverflow.com/questions/1765399/linking-apache-to-tomcat-with-multiple-domains can someone confirm that it would work as above?

  Read the article

• How can I redirect/forward all the UDP/TCP traffic on one interface to another interface in OpenWrt

  - by Sina Sou

  I am new to networking and I have a measurement device (D) that periodically sends all its readings over few UDP multicast sockets (with different multicast IP addresses and different port numbers). That device even listens to a TCP socket simultaneously to modify its configuration on port 7234. Since the device has just a Ethernet interface for communication and I want to make it work wireless, I decided to use a very small wireless open-wrt based router that attaches to the device (D) and redirect/forward all the network traffic(Both UDP/TCP) to the router wireless interface. In order to simplify the problem assume that the Device (D) establishes following sockets (at the same time) UM_SOCK1: UDP mcast socket on 239.1.2.3 port# 50620 UM_SOCK2: UDP mcast socket on 239.1.2.4 port# 50640 TC_SOCK3: TCP DHCP/STATIC ip address 192.168.1.200 port 7234 And (D) is connected to Open-Wrt router (R) via interface en01 (Ethernet) the router has it own wireless interface on (wlan0) I want all the traffic from interface pass through wlan01 and vice versa (bi-directional) en01 <---- wlan01 What would be the minimum iptables or ... commands that I need to make this possible? Even I am wondering if traffic directing can be made easier like if the direction is not going to be based on IP addresses(not desired if the device is connected via DHCP) I would rather redirection to be Interface(en0) based or on MAC address (The best solution since my device has unique MAC address)? Thanks

  Read the article

• Painless deployment of a Django app (port from Drupal). Do I have to switch to a VPS?

  - by Monden

  I'm about to complete porting my Drupal based community site to Django. My Drupal site is hosted at a shared hosting (Dreamhost) for last 4 years, and stability & performance has been satisfactory. The site gets around 5k unique visitors with 70-80k page views a day. This will be my first deployment of a Django application and I'm not comfortable with managing my own VPS. I use Ubuntu as a dev. server, but I don't have experience with it at the production env. I have an unrelated internal CRM app (Django) that I host with Webfaction. However security and performance isn't an issue as it's only accessed by 5 people. Unfortunately, I don't have much time to learn and maintain a VPS at this moment. I would like to know if I can host a site with this much traffic at Webfaction's shared environment? How would performance differ in comparison to Linode or Slicehost? Google AppEngine isn't an option at the moment as I'll be using my current Postgresql database.

  Read the article

• How do I examine my Windows firewall outbound rules?

  - by David

  I need a program to listen to port 9000 on localhost with my Windows firewall. I've created an outgoing and an incoming rule for my program but I can only see my incomming rule in the Windows firewall general menu? I've also noticed that I've many more outgoing rules in my outgoing rule menu but I can only see 4 outgoing rules in my general firewall menu but I see many many more incomming rules? The program doesn't listen to port 9000 or it doesn't working. I've also tried netstat -a -p to no avail. I didn't see 0.0.0.0:9000 in the output? How can I check if my program listen to port 9000 or connect to port 9000 when it's open?

  Read the article

• Apache + Tomcat: Which one should handle SSL? IP-based proxy forwarding?

  - by delirial

  We currently have a Tomcat application running with SSL on port 443. Right now we have an apache server that accepts http requests on port 80 and redirects to the Tomcat instance: <VirtualHost *:80> ServerName domain.com ServerAlias domain.com <LocationMatch "/"> Redirect permanent / https://domain.com/ </LocationMatch> </VirtualHost> Tomcat is handling SSL, because there's no proxy, just a simple redirect to the SSL port: <Connector port="443" maxThreads="200" scheme="https" secure="true" SSLEnabled="true" keystoreFile="/app/ssl/domain_com.jks" keystorePass="ourpassword" clientAuth="false" sslProtocol="TLS"/> We want to begin using the apache web server as a proxy and additionally, do per-IP redirects to certain apps that should only be used by hosts on a pre-determined IP range. We would also like to redirect IPs that don't match the pre-determined list to a static html page hosted on the apache server. My first question is: Should I continue to handle SSL on Tomcat's end, or should I use apache with SSL while forwarding to an "unprotected" tomcat port? Is there any way to redirect to different apps (and potentially hosts) depending on the incoming IP? thanks, del

  Read the article

• Tunnel requests from remote server with ssh

  - by abronte

  I'm looking to forward requests from port 8003 on the remote machine to my localhost at port 8080

  Read the article

• What type of security problems are mitigated by this .NET architecture?

  - by Jonno

  Given the following physical layout for a .NET web application: DB (sql server, windows) - No public route (no table access, only stored procs) Web Service DAL (iis, windows) - No public route (can be accessed by web server via port 80 and 443) Web Server (iis, windows) - Public route (only via port 80 and 443) What type(s) / examples of attack could be used to compromise the public web server but would be blocked by the Web Service DAL? i.e. can you think of concrete attack types that the DAL stops? Please note, I am interested only in the security aspect, not scaling / fault tolerance / performance / etc. In my mind if the web server has been compromised using an attack over port 80/443, then the same attack would work over port 80/443 to the Web Service DAL box.

  Read the article

• Multiple SSL on same IP [closed]

  - by kadourah

  Possible Duplicate: Multiple SSL domains on the same IP address and same port? I have the following situation: first domain: test.domain.com IP: 1.2.3.4 Port: 443 SSL: Purchased from godaddy and specific to that domain Works fine no issues. I would like to add another site: test2.domain.com IP: the same Port: can be different SSL: different since I can't use the SSL above because it's specific to the site above. Now, when I add the HTTPS binding to the second site with IP:Port combination it appears to always load the first SSL ignoring the second certificate. How can I add second SSL binding to the same IP using a "different" certificate? Can this be done?

  Read the article

• What could be wrong with my VLAN?

  - by Matt

  I've got a VLAN 10 setup as a management VLAN. The management VLAN comes off port 48 and links to another set of switches that do not support VLAN's so it was I believe set up as an untagged access port. In the past this was a different brand of switch and this worked fine. However, since changing to the HP V1910-48G series I can't seem to get this working. I must point out that as far as I'm aware it is wired up properly (I can't check this physically as I'm working remote and have asked the tech who's got access to double check for me). Now I don't have a huge amount of experience with VLAN environments but AFAIK this is right. I've set the port 48 (linked to the management switches) as an untagged port with PVID 10 and access link type. Is this all I'd need to do from a configuration perspective to ensure all devices connected to port 48 would end up being on VLAN 10 and not needing to tag their frames. i.e. the tag would be added by the switch before being forwarded.

  Read the article

• Two routers on the same network

  - by qroberts

  My ISP has supplied me with a modem/router all in one and it isn't very good. It loses its settings and dies frequently. So I have another router in my apartment (Linksys wrt310n) that is connected to the modem via LAN-LAN port connections. I want to give my Linksys router the DHCP role and also have the ISP modem DMZ everything to the Linksys router. I want to be able to have all computers connected to both routers on the same network as well. I have been able to make it so that the Linksys has a DMZ to it from the ISP modem, but ISP modem LAN port - Linksys WAN port, so they were on different networks. Is there a way to have it so that both of them are on the same network but the Linksys router handles DHCP and port forwarding?

  Read the article

• Static file download from browser breaking in varnish but works fine in Apache

  - by Ron

  I would at first like to thank everyone at serverfault for this great website and I also come to this site while searching in google for various server related issues and setups. I also have an issue today and so I am posting here and hope that the seniors would help me out. I had setup a website on a dedicated server a few days ago and I used Varnish 3 as the frontend to Apache2 on a Debian Lenny server as the traffic was a bit high. There are several static file downloads of around 10-20 MB in size in the website. The website looked fine in the last few days after I setup. I was checking from a 5mbps + broadband connection and the file downloads were also completed in seconds and working fine. But today I realized that on a slow internet connection the file downloads were breaking off. When I tried to download the files from the website using a browser then it broke off after a minute or so. It kept on happening again and again and so it had nothing to do with the internet connection. The internet connection was around 512 kbps and so it was not dial up level speed too but decent speed where files should easily download though not that fast. Then I thought of trying out with the apache backend port and used the port number to check out if the problem occurs. But then on adding the apache port in the static file download url, the files got downloaded easily and did not break even once. I tried it several times to make sure that it was not a coincidence but every time I was using the apache port in the file download url then it was downloading fine while it was breaking each time with the normal link which was routed through Varnish I suppose. So, it seems Varnish has somehow resulted in the broken file downloads. Could anyone give any idea as to why it is happening and how to fix the problem. For more clarification, take this example: Apache backend set on port 8008, Varnish frontend set on port 80 Now when I download say http://mywebsite.com/directory/filename.extension Then the download breaks off after a minute or so. I cannot be sure it is due to the time or size though and I am just assuming. May be some other reason too. But when I download using: http://mywebsite.com:8008/directory/filename.extension Then the file download does not break at all and it gets download fine. So, it seems that varnish is somehow creating the file download breaking and not apache. Does anybody have any idea as to why it is happening and how can it be fixed. Any help would be highly appreciated. And my varnish default.vcl is backend apache { set backend.host = "127.0.0.1"; set backend.port = "8008"; } sub vcl_deliver { remove resp.http.X-Varnish; remove resp.http.Via; remove resp.http.Age; remove resp.http.Server; remove resp.http.X-Powered-By; }

  Read the article

• Strange IP address showing up with OS X ssh

  - by user50799

  I was futzing around with DTrace on Mac OS X and found the following script that prints out information about connections being established: $ cat script.d syscall::connect:entry { printf("execname: %s\n", execname); printf("pid: %d\n", pid); printf("sockfd: %d\n",arg0); socks = (struct sockaddr*)copyin(arg1, arg2); hport = (uint_t)socks->sa_data[0]; lport = (uint_t)socks->sa_data[1]; hport <<= 8; port = hport + lport; printf("Port number: %d\n", port); printf("IP address: %d.%d.%d.%d\n", socks->sa_data[2], socks->sa_data[3], socks->sa_data[4], socks->sa_data[5]); printf("======\n"); } I run it in one window: $ sudo dtrace -s ./script.d Then I ssh to another machine from another window. I get this output from my dtrace window: CPU ID FUNCTION:NAME 0 18696 connect:entry execname: ssh pid: 5446 sockfd: 3 Port number: 22 IP address: 192.168.0.207 ====== 0 18696 connect:entry execname: ssh pid: 5446 sockfd: 5 Port number: 12148 IP address: 109.112.47.108 ====== ^C The first IP address I can explain (192.168.0.207), that's the machine I'm connecting to. But what's with the 109.112.47.108 machine? It doesn't show up in tcpdump nor netstat -an Is there something with my dtrace code or my understanding of how the connect system call works?

  Read the article

• Two domains hosted on the same server with different root folder shows up the same homepage

  - by emaillenin

  I have hosted two domains from GoDaddy at Linode VPS. They are mobiletoast.com and lesseltechnologies.com Thought the latter site has a separate index folder, whenever I navigate to it, I get the homepage of mobiletoast.com The strange thing is, I see the expected page (It works), when I open the site from my mobile phone. But when I open the site from my PC (any browser, without any cache, hard refresh), I get the homepage of mobiletoast.com The Linode support team says, they see the correct "It works" page. But I am not able to see that page. This is the output of the command apache2ctl -S root@li339-83:~# apache2ctl -S VirtualHost configuration: wildcard NameVirtualHosts and _default_ servers: *:80 is a NameVirtualHost default server mobiletoast.com (/etc/apache2/sites-enabled/000-default:1) port 80 namevhost mobiletoast.com (/etc/apache2/sites-enabled/000-default:1) port 80 namevhost blog.mobiletoast.com (/etc/apache2/sites-enabled/blog.mobiletoast.com:1) port 80 namevhost lesseltechnologies.com (/etc/apache2/sites-enabled/lesseltechnologies.com:1) port 80 namevhost mobiletoast.com (/etc/apache2/sites-enabled/mobiletoast.com:1) Syntax OK

  Read the article

• Cascading KVM switches

  - by einpoklum

  I have a not-so-small number of computers (say, 5) which I want to access with a single keyboard, USB and monitor. I can get an 8-port KVM switch, which is a pretty expensive piece of hardware; however, in theory, I should be able to cascade KVM switches: Have one 4-port KVM switch between 2 other KVMs (a 2-port and a 4-port). Is this doable (with typical off-the-shelf switches and cables)? Has anyone had experience doing this? Note: I'm interested in USB-only for the keyboard and mouse, and either VGA or DVI for the display. Audio and PS/2 connections are irrelevant for me..

  Read the article

• No sigal showing on LCD TV when Conects Leptop via VGA Cable [migrated]

  - by Amit Prajapati

  I am trying to connect my laptop to Samsung LCD TV by VGA TO HDMI cable My Laptop find Samsung tv on display setting. But When I press fn+F7 key my TV display No Signal My laptop specifications are: "Lenovo R61 ThinkPad, Model: 8935AE7 Window7 Ultimate 32 bits 2GB RAM VGA Port available No HDMI Port My TV specification are: Samsung LCD 26 HDMI Port available VGA Port Available I want to know what is problem? When I connect Another Dell Laptop (Window7 32 bit) with HDMI to HDMI cable it work properly. Thanks in Advance!

  Read the article

• Connecting to SVN server from a computer outside of my LAN

  - by Tom Auger

  I've got a Fedora server running Subversion and svnserve on port 3690. My repo is at /var/svn/project_name. I have my router forwarding port 3690 to the local server (as well as port 80, 21, 22 and a few others). When I connect locally to svn://192.168.0.2/project_name it works great. When I connect from an external server to svn://my.static.ip/project_name I get a time out connecting to the host. However, if I http://my.static.ip there is no problem, so port forwarding is working (at least for port 80). I don't want to run WebDAV or svn via HTTP/s. I'd like it to work using svnserve, as documented in the svn book. What have I misconfigured? EDIT Here is the last part of my iptables dump. I'm not an expert, but it looks OK to me: ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:svn ACCEPT udp -- anywhere anywhere state NEW udp dpt:svn ACCEPT tcp -- anywhere anywhere state NEW tcp dpts:6680:6699 ACCEPT udp -- anywhere anywhere state NEW udp dpts:6680:6699 REJECT all -- anywhere anywhere reject-with icmp-host-prohibited EDIT 2 Results from sudo netstat -tulpn tcp 0 0 0.0.0.0:3690 0.0.0.0:* LISTEN 1455/svnserve

  Read the article

• postgresql 9.1 Multiple Cluster on same host

  - by user1272305

  I have 2 cluster databases, running on the same host, Ubuntu. My fist database port is set to default but my second database port is set to 5433 in the postgresql.conf file. While everything is ok with local connections, I cannot connect using any of my tools to the second database with port 5433, including pgAdmin. Please help. Any parameter that I need to modify for the new database with port 5433? netstat -an | grep 5433 shows, tcp 0 0 0.0.0.0:5433 0.0.0.0:* LISTEN tcp6 0 0 :::5433 :::* LISTEN unix 2 [ ACC ] STREAM LISTENING 72842 /var/run/postgresql/.s.PGSQL.5433 iptables -L shows, Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination

  Read the article

• Configuring an EH-WIC Card on Cisco 1941 Router

  - by Olanrewaju T

  I have a Cisco 1941 Router that has just two ports for Gigabit connection but wanted more so I got a four port Cisco EH-WIC Card and connected it to it. I have been trying to assign IP address to the port GigabitEtnernet 0/0/0 because I have a cable already connected to it whose device I want it facing the router directly because I dont want to NAT its address. I want to assign the physical address on the port. Kinldy help if you understand what I am saying. Regards

  Read the article

• Enabling "USB Printing Support" in Windows 7

  - by Kevin Dente

  I'm trying to use an old parallel-port based printer with a USB-to-parallel port adapter on Windows 7. When I plug it into the USB port on the computer it's listed as an unrecognized device. I know that these cables typically use the "USB Printing Support" driver with makes USB ports show up as printer ports in the printer dialog. Is there a way to manually add USB Printing Support to Windows 7, since it isn't being added automatically?

  Read the article

• Nginx server 301 Moved permanently

  - by user145714

  When I did a curl -v http://site-wordpress.com:81 I received this result: About to connect() to site-wordpress.com port 81 (#0) Trying ip... connected Connected to site-wordpress.com (ip) port 81 (#0) GET / HTTP/1.1 User-Agent: curl/7.19.7 (x86_64-unknown-linux-gnu) libcurl/7.19.7 NSS/3.12.6.2 zlib/1.2.3 libidn/1.18 libssh2/1.2.2 Host: site-wordpress.com:81 Accept: / < HTTP/1.1 301 Moved Permanently < Server: nginx/1.2.4 < Date: Fri, 16 Nov 2012 16:28:19 GMT < Content-Type: text/html; charset=UTF-8 < Transfer-Encoding: chunked < Connection: keep-alive < X-Pingback: The URL above/xmlrpc.php < Location: The URL above Seems like this line in my fastcgi_params is causing grief. fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; If I remove this line , I get HTTP/1.1 200 OK but I get a blank page. This is my config: server { listen 81; server_name site-wordpress.com; root /var/www/html/site; access_log /var/log/nginx/access.log; error_log /var/log/nginx/error.log; index index.php; if (!-e $request_filename){ rewrite ^(.*)$ /index.php break; } location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; # port where FastCGI processes were spawned fastcgi_index index.php; include /etc/nginx/fastcgi_params; include /etc/nginx/mime.types; } location ~ \.css { add_header Content-Type text/css; } location ~ \.js { add_header Content-Type application/x-javascript; } } This config works with ip and port 80. But now I need to use a domain name and port 81, which doesn't work. Could someone please help. Thanks.

  Read the article

• My Portable Hard Drive with USB3 didn't work when connected to My Laptop, but it working with USB2 properly

  - by Mohammad Hasan Esfahanian

  I have Western Digital My Passport Essential Portable Hard Drive with USB3 and Model:WDBACY5000ABK-EESN. Until about two or three months ago when I connected that to My Laptop USB3 port, that worked very well. But now when I'm connecting that to My device, The system does not detect any Hard Drives. When plug in the USB2 port is working properly. I connected that to another Laptop whit USB3 port but I had the same problem. I tested My Laptop port with a Flash Memory by USB3 and ports were healthy and I'm sure they are working. For this issue, I changed the windows, but it still did not work. What can I do? Thanks in advance.

  Read the article

• Can there be multiple monitors with these video cards and setup

  - by z_Zelman

  I have a Acer Aspire TimelineX 4830TG-6808 laptop running windows 7 Ultimate with one VGA port and one HDMI port. It has one Intel HD Graphics family card and one NVIDIA GeForce GT 540M. Right now I have one monitor running via the VGA port, and also the basic laptop monitor. When I look at the monitor setup, I see one unused video card available. Can I have another monitor via the HDMI port? If I cannot run three monitors, is there some way I could make a large "single" desktop that extends over two monitors? For the sake of celerity, maybe something like having a virtual machine window that extends over two monitors. Could this maybe come from third party software?

  Read the article

< Previous Page | 96 97 98 99 100 101 102 103 104 105 106 107  | Next Page >