Search Results

Search found 2630 results on 106 pages for 't mount'.

Page 100/106 | < Previous Page | 96 97 98 99 100 101 102 103 104 105 106  | Next Page >

• AIX: iscsi volumes disappear after reboot

  - by Dan

  We have an IBM P505 AIX box, with two internal disks and a defined iSCSI volume. The iSCSI volume is defined in it's own volume group, and is connected to an IBM iSCSI DS3300 disk array via the secondary onboard ethernet port (ie, we're not using a dedicated HBA, we're using the second onboard ethernet port for iSCSI exclusively.) When we reboot the AIX box, the iSCSI volume doesn't get mounted (which is fine; I've figured out that it fails to mount because AIX tries mounting it's volumes before starting the networking stack.) The problem is, after the server has booted it fails to redetect the iSCSI target as a physical disk. This means the volume group (iscsivg) can't go online. if I run cfgmgr -v to redetect the iscsi volume it successfully detects the iscsi target volume and creates a physical volume reference, but allocates it a different volume ID to what was defined before. eg - rootvg contains hdisk 0 and 1 iscsivg was originally defined with hdisk2 as the physical iSCSI volume. after reboot and running cfgmgr -v, AIX detects physical volumes hdisk0, hdisk11 and hdisk3. As there's no hdisk2, I can't varyon the iscsivg volume group. I can't seem any existing hdisk2 definition in the ODM. I can't easily add or change the definition of the physcial disk in the iscsivg volume group as it won't "varyon". Exporting the volume group deletes it completely, recreating the volume group by "importing" it from the reallocated disk makes it available again, but surely there's a better way? Can I force a specific hdisk drive designation for an iscsi target? How do you bring online iSCSI volumes after a reboot? I assume this "just works" with a dedicated HBA instead of a generic ethernet adapter? By the way, the iSCSI volume works fine once it's mounted; we only have problems getting it working - and only with AIX. The iSCSI array works fine with our Linux and Windows servers; ie the volumes get detected and remounted after boot time without any problems, using generic ethernet adapters. Here's some of the config from the AIX box: defined disks / devices: # lsdev hdisk0 Available 06-08-01-5,0 16 Bit LVD SCSI Disk Drive hdisk1 Available 06-08-01-8,0 16 Bit LVD SCSI Disk Drive hdisk3 Available Other iSCSI Disk Drive iscsi0 Available iSCSI Protocol Device scsi0 Available 06-08-00 PCI-X Dual Channel Ultra320 SCSI Adapter bus scsi1 Available 06-08-01 PCI-X Dual Channel Ultra320 SCSI Adapter bus ses0 Available 06-08-01-15,0 SCSI Enclosure Services Device sisscsia0 Available 06-08 PCI-X Dual Channel Ultra320 SCSI Adapter iscsi target definition in /etc/iscsi/targets: # IBM DS3300 disk array # port 1 on second controller 10.10.xx.xxx 3260 iqn.1992-01.com.lsi:1535.600a0b80005b0a7fxxxxxxxxxxxx physical volumes (after reimporting the volume group) # lspv hdisk0 0003b08a0d4936b6 rootvg active hdisk1 0003b08aaa5cb366 rootvg active hdisk3 0003b08a032d04bb iscsivg active

  Read the article

• OS X: Finder error -36 when using SMB shares on a Samba server bound to AD

  - by Frenchie

  We're looking at deploying SMB homes on Debian (5.0.3) for our mac clients rather than purchasing four new Xserves. We've got our test servers built and functioning properly. Windows clients behave perfectly, but we've run into an issue with OS X (10.6.x and 10.5.x). We're going this route instead of Windows file servers due to a whole bunch of other issues that arise when going that way. Specifically, when mounting a SMB share with unix extensions switched on and the remote server bound to AD, the finder cannot save files on the share, instead touching the file and then bombing out with a -36 IO error, folder creation is fine. Copying files in the terminal behaves fine and the problem seems to be limited to the finder. The issue arises (I think) as the remote UID/GID is passed across when using unix extensions. OS X uses its own winbind idmap (odsam) to work out the effective UID/GID from AD users and groups whilst we're using a rid map on the server. Consequently, there is a mismatch in ownership which the finder chooses to honour. How OS X appears to handle this is to use the remote uid and gid at the file permission level (see below) and then set an OS X acl granting the local uid/gid to have the appropriate permissions on the file. I think the finder touches the file (which the kernel allows because of the ACL) and then checks the filesystem perms and drops out with the IO error. On a Client fc-003353-d:homes2 root# ls -led test/ drwx------+ 2 135978 100513 16384 Feb 3 15:14 test/ 0: user:jfrench allow list,add_file,search,delete,add_subdirectory,delete_child,readattr,writeattr,readextattr,writeextattr,readsecurity,writesecurity,chown,file_inherit,directory_inherit 1: group:ARTS\domain users allow 2: group:everyone allow 3: group:owner allow list,add_file,search,delete,add_subdirectory,delete_child,readattr,writeattr,readextattr,writeextattr,readsecurity,writesecurity,chown,file_inherit,directory_inherit,only_inherit 4: group:group allow list,add_file,search,delete,add_subdirectory,delete_child,readattr,writeattr,readextattr,writeextattr,readsecurity,writesecurity,chown,file_inherit,directory_inherit,only_inherit 5: group:everyone allow list,add_file,search,delete,add_subdirectory,delete_child,readattr,writeattr,readextattr,writeextattr,readsecurity,writesecurity,chown,file_inherit,directory_inherit,only_inherit We've tried the following without any luck: Setting the Linux side file owner to match the OS X GID/UID Adding ACLs on the linux filesystem which grant the OS X GID/UID perms Disabling extended attributes Setting steams=no in /etc/nsmb.conf on the client We're currently running a workaround which is to just turn off unix extensions which forces the macs to just mount the share as the local user with u=rwx perms. This works for most things but is causing a few apps that expect certain perms to break in subtle ways. Worst case scenario is that we'll continue running in this way but we would like to have the unix extensions on. Regards. Relevant SMB config below: [global] workgroup = ARTS realm = *snip* security = ADS password server = *snip* unix extensions = yes panic action = /usr/share/panic-action %d idmap backend = rid:ARTS=100000-10000000 idmap uid = 100000-10000000 idmap gid = 100000-10000000 winbind enum users = Yes winbind enum groups = Yes veto files = /lost+found/aquota.*/ hide files = /desktop.ini/$RECYCLE.BIN/.*/AppData/Library/ ea support = yes store dos attributes = yes map system = no map archive = no map readonly = no

  Read the article

• Using Diskpart in a PowerShell script won't allow script to reuse drive letter

  - by Kyle

  I built a script that mounts (attach) a VHD using Diskpart, cleans out some system files and then unmounts (detach) it. It uses a foreach loop and is suppose to clean multiple VHD using the same drive letter. However, after the 1st VHD it fails. I also noticed that when I try to manually attach a VHD with diskpart, diskpart succeeds, the Disk Manager shows the disk with the correct drive letter, but within the same PoSH instance I can not connect (set-location) to that drive. If I do a manual diskpart when I 1st open PoSH I can attach and detach all I want and I get the drive letter every time. Is there something I need to do to reset diskpart in the script? Here's a snippet of the script I'm using. function Mount-VHD { [CmdletBinding()] param ( [Parameter(Position=0,Mandatory=$true,ValueFromPipeline=$false)] [string]$Path, [Parameter(Position=1,Mandatory=$false,ValueFromPipeline=$false)] [string]$DL, [string]$DiskpartScript = "$env:SystemDrive\DiskpartScript.txt", [switch]$Rescan ) begin { function InvokeDiskpart { Diskpart.exe /s $DiskpartScript } ## Validate Operating System Version ## if (Get-WmiObject win32_OperatingSystem -Filter "Version < '6.1'") {throw "The script operation requires at least Windows 7 or Windows Server 2008 R2."} } process{ ## Diskpart Script Content ## Here-String statement purposefully not indented ## @" $(if ($Rescan) {'Rescan'}) Select VDisk File="$Path" `nAttach VDisk Exit "@ | Out-File -FilePath $DiskpartScript -Encoding ASCII -Force InvokeDiskpart Start-Sleep -Seconds 3 @" Select VDisk File="$Path"`nSelect partition 1 `nAssign Letter="$DL" Exit "@ | Out-File -FilePath $DiskpartScript -Encoding ASCII -Force InvokeDiskpart } end { Remove-Item -Path $DiskpartScript -Force ; "" Write-Host "The VHD ""$Path"" has been successfully mounted." ; "" } } function Dismount-VHD { [CmdletBinding()] param ( [Parameter(Position=0,Mandatory=$true,ValueFromPipeline=$false)] [string]$Path, [switch]$Remove, [switch]$NoConfirm, [string]$DiskpartScript = "$env:SystemDrive\DiskpartScript.txt", [switch]$Rescan ) begin { function InvokeDiskpart { Diskpart.exe /s $DiskpartScript } function RemoveVHD { switch ($NoConfirm) { $false { ## Prompt for confirmation to delete the VHD file ## "" ; Write-Warning "Are you sure you want to delete the file ""$Path""?" $Prompt = Read-Host "Type ""YES"" to continue or anything else to break" if ($Prompt -ceq 'YES') { Remove-Item -Path $Path -Force "" ; Write-Host "VHD ""$Path"" deleted!" ; "" } else { "" ; Write-Host "Script terminated without deleting the VHD file." ; "" } } $true { ## Confirmation prompt suppressed ## Remove-Item -Path $Path -Force "" ; Write-Host "VHD ""$Path"" deleted!" ; "" } } } ## Validate Operating System Version ## if (Get-WmiObject win32_OperatingSystem -Filter "Version < '6.1'") {throw "The script operation requires at least Windows 7 or Windows Server 2008 R2."} } process{ ## DiskPart Script Content ## Here-String statement purposefully not indented ## @" $(if ($Rescan) {'Rescan'}) Select VDisk File="$Path"`nDetach VDisk Exit "@ | Out-File -FilePath $DiskpartScript -Encoding ASCII -Force InvokeDiskpart Start-Sleep -Seconds 10 } end { if ($Remove) {RemoveVHD} Remove-Item -Path $DiskpartScript -Force ; "" } }

  Read the article

• Ububtu server 12.04 auto installation freezes at kickseeding running if ks.cfg has post scripts

  - by john206

  I'm trying to make a custom Ubuntu Server iso file. Kickstart file (ks.cfg) runs smooth when there is no %post in the file and Ubuntu installs correctly with ks configuration. Installation finishes installing base, apt, grub and It echos: Kickseed Running... and it freezes @ 0% I thought may be apt-get update doesnt work in ks file, I tried to install other apps like apache2 but no luck I have created dozen iso images and installed them in Virtual Box.I have been googling for 3 days and checked out ubuntu forums but haven't figured out the issue. I appreciate your help. This is how I made the iso image. My ks.file and txt.cfg files located in isolinux directory: root@ubuntu:/home/work mount -o loop ubuntu-12.04-amd64.iso original-iso/ rsync -a original-iso/ custom-iso/ cp ks.cfg custom-iso/isolinux/ cp txt.cfg custom-iso/isolinux/ chmod -R 777 custom-iso/ #Creating Iso image mkisofs -D -r -V “$IMAGE_NAME” -cache-inodes -J -l -b isolinux/isolinux.bin -c isolinux/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table -o ~/ubuntu-12.04-alternate-custom-amd64.iso custom-iso/ ks.cfg #Generated by Kickstart Configurator #platform=AMD64 or Intel EM64T #System language lang en_US #Language modules to install langsupport en_US #System keyboard keyboard us #System mouse mouse #System timezone timezone America/Los_Angeles #Root password rootpw --iscrypted somethingsomething #Initial user user ubuntu --fullname "ubuntu" --iscrypted --password somethingsomething. #Reboot after installation reboot #Use text mode install text #Install OS instead of upgrade install #Use CDROM installation media cdrom #System bootloader configuration bootloader --location=mbr #Clear the Master Boot Record zerombr yes #Partition clearing information clearpart --all --initlabel #Disk partitioning information part /boot --size 128 --fstype=ext3 --asprimary part / --size 512 --fstype=ext3 --asprimary part swap --size 512 part /tmp --size 512 --fstype=ext3 part /var --size 512 --fstype=ext3 part /usr --size 4096 --fstype=ext3 part /home --size 2048 --fstype=ext3 #System authorization infomation auth --useshadow --enablemd5 #Network information network --bootproto=dhcp --device=eth0 #Firewall configuration firewall --disabled --http --ftp --ssh #X Window System configuration information xconfig --depth=32 --resolution=1024x768 --defaultdesktop=GNOME %post apt-get update mkdir /home/user txt.cfg default autoinstall label autoinstall menu label ^Install Custom Ubuntu Server kernel /install/vmlinuz append file=/cdrom/preseed/ubuntu-server.seed initrd=/install/initrd.gz quiet ks=cdrom:/isolinux/ks.cfg -- label install menu label ^Install Ubuntu Server kernel /install/vmlinuz append file=/cdrom/preseed/ubuntu-server.seed vga=788 initrd=/install/initrd.gz quiet -- label cloud menu label ^Multiple server install with MAAS kernel /install/vmlinuz append modules=maas-enlist-udeb vga=788 initrd=/install/initrd.gz quiet -- label check menu label ^Check disc for defects kernel /install/vmlinuz append MENU=/bin/cdrom-checker-menu vga=788 initrd=/install/initrd.gz quiet -- label memtest menu label Test ^memory kernel /install/mt86plus label hd menu label ^Boot from first hard disk localboot 0x80

  Read the article

• Error Installing ruby with RVM Single User mode on Arch Linux

  - by ChrisBurnor

  I've just installed RVM on ArchLinux x64 in single user mode via the recommended install script curl -L https://get.rvm.io | bash -s stable I've also installed all the requirements listed in rvm requirements However, I'm having trouble actually installing any version of ruby. And getting the following error: arch:~ % rvm install 1.9.3 No binary rubies available for: ///ruby-1.9.3-p194. Continuing with compilation. Please read 'rvm mount' to get more information on binary rubies. Fetching yaml-0.1.4.tar.gz to /home/christopher/.rvm/archives % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 460k 100 460k 0 0 702k 0 --:--:-- --:--:-- --:--:-- 767k Extracting yaml-0.1.4.tar.gz to /home/christopher/.rvm/src Prepare yaml in /home/christopher/.rvm/src/yaml-0.1.4. Configuring yaml in /home/christopher/.rvm/src/yaml-0.1.4. Error running ' ./configure --prefix=/home/christopher/.rvm/usr ', please read /home/christopher/.rvm/log/ruby-1.9.3-p194/yaml/configure.log Compiling yaml in /home/christopher/.rvm/src/yaml-0.1.4. Error running 'make', please read /home/christopher/.rvm/log/ruby-1.9.3-p194/yaml/make.log Please note that it's required to reinstall all rubies: rvm reinstall all --force Installing Ruby from source to: /home/christopher/.rvm/rubies/ruby-1.9.3-p194, this may take a while depending on your cpu(s)... ruby-1.9.3-p194 - #downloading ruby-1.9.3-p194, this may take a while depending on your connection... ruby-1.9.3-p194 - #extracting ruby-1.9.3-p194 to /home/christopher/.rvm/src/ruby-1.9.3-p194 ruby-1.9.3-p194 - #extracted to /home/christopher/.rvm/src/ruby-1.9.3-p194 Skipping configure step, 'configure' does not exist, did autoreconf not run successfully? ruby-1.9.3-p194 - #compiling Error running 'make', please read /home/christopher/.rvm/log/ruby-1.9.3-p194/make.log There has been an error while running make. Halting the installation. The log files are as follows: arch:~ % cat ~/.rvm/log/ruby-1.9.3-p194/yaml/configure.log __rvm_log_command:32: permission denied: arch:~ % cat ~/.rvm/log/ruby-1.9.3-p194/yaml/make.log make: *** No targets specified and no makefile found. Stop. arch:~ % cat ~/.rvm/log/ruby-1.9.3-p194/make.log make: *** No targets specified and no makefile found. Stop.

  Read the article

• Can't manage iPod from linux anymore

  - by kemp

  I used to be able to see and manage my iPod with different softwares: Amarok, Rhythmbox, GTKPod. The device is a nano 1st generation 4gb. Currently it mounts regularly and can be accessed from the file system, but I get this in dmesg: [ 1547.617891] scsi 11:0:0:0: Direct-Access Apple iPod 1.62 PQ: 0 ANSI: 0 [ 1547.619103] sd 11:0:0:0: Attached scsi generic sg2 type 0 [ 1547.620478] sd 11:0:0:0: [sdb] Adjusting the sector count from its reported value: 7999488 [ 1547.620494] sd 11:0:0:0: [sdb] 7999487 512-byte hardware sectors: (4.09 GB/3.81 GiB) [ 1547.621718] sd 11:0:0:0: [sdb] Write Protect is off [ 1547.621726] sd 11:0:0:0: [sdb] Mode Sense: 68 00 00 08 [ 1547.621732] sd 11:0:0:0: [sdb] Assuming drive cache: write through [ 1547.623591] sd 11:0:0:0: [sdb] Adjusting the sector count from its reported value: 7999488 [ 1547.624993] sd 11:0:0:0: [sdb] Assuming drive cache: write through [ 1547.625003] sdb: sdb1 sdb2 [ 1547.629686] sd 11:0:0:0: [sdb] Attached SCSI removable disk [ 1548.084026] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 1548.369502] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 1548.504358] FAT: invalid media value (0x2f) [ 1548.504363] VFS: Can't find a valid FAT filesystem on dev sdb1. [ 1548.945173] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 1548.945179] FAT: invalid media value (0x2f) [ 1548.945182] VFS: Can't find a valid FAT filesystem on dev sdb1. [ 1610.092886] usb 2-6: USB disconnect, address 9 The only application that can access it (partially) is Rhythmbox. I say partially because I can transfer files to the iPod but can't remove or modify them. Also one transfer didn't finish and only 9 out of 16 songs were delivered to the device. All other softwares I tried (GTKPod, Amarok, Songbird) don't even detect it. What can I do to troubleshoot this? EDIT: # fdisk -l /dev/sdb Disk /dev/sdb: 4095 MB, 4095737344 bytes 241 heads, 62 sectors/track, 535 cylinders Units = cylinders of 14942 * 512 = 7650304 bytes Disk identifier: 0x20202020 Device Boot Start End Blocks Id System /dev/sdb1 1 11 80293+ 0 Empty Partition 1 has different physical/logical beginnings (non-Linux?): phys=(0, 1, 1) logical=(0, 1, 2) Partition 1 has different physical/logical endings: phys=(9, 254, 63) logical=(10, 181, 8) Partition 1 does not end on cylinder boundary. /dev/sdb2 11 536 3919415+ b W95 FAT32 Partition 2 has different physical/logical beginnings (non-Linux?): phys=(10, 0, 7) logical=(10, 181, 15) Partition 2 has different physical/logical endings: phys=(497, 240, 62) logical=(535, 88, 61) EDIT2: The "before" state is hard to tell, it was a lot of updates ago. Haven't been using my iPod for a while so I can't say when exactly it stopped working. I'm sure Amarok was still at version 1.X but can't remember when it was. My current system is debian testing fully updated. NOTE: just noticed that if I mount the device manually instead of letting nautilus automount it, I can see it again on GTKPod but still not on Banshee AND it's vanished from Rhythmbox...

  Read the article

• EC2 Filesystem / Files stored on the wrong partiton after launching new instance from AMI

  - by Philip Isaacs

  Today I set up a new EC2 Instance from and AMI I created from an older EC2 instance. When I launched the new instance I took the AMI that was on a small instance and launched with a medium instance. From what I can tell this is pretty standard stuff. But here's the stang part. According to AWS these are the differences Small Instance (Default) 1.7 GB of memory, 1 EC2 Compute Unit (1 virtual core with 1 EC2 Compute Unit), 160 GB of local instance storage, 32-bit or 64-bit platform Medium Instance 3.75 GB of memory, 2 EC2 Compute Units (1 virtual core with 2 EC2 Compute Units each), 410 GB of local instance storage, 32-bit or 64-bit platform Okay now here's where I'm having an issue. I when I log into the new bigger instance it still reports only having 1.7 GB of ram. The other strange part is that all my old partitions are still their in the same configurations. I see a new larger partition /mnt which is essential empty. Filesystem Size Used Avail Use% Mounted on /dev/sda1 7.9G 5.9G 1.6G 79% / none 846M 120K 846M 1% /dev none 879M 0 879M 0% /dev/shm none 879M 76K 878M 1% /var/run none 879M 0 879M 0% /var/lock none 879M 0 879M 0% /lib/init/rw /dev/sda2 335G 195M 318G 1% /mnt /dev/sdf 16G 9.9G 5.1G 67% /var2 This EC2 is a web server and I was serving files off the /var2 directory but for some reason the instance is storing everything on / Okay here's what I'd like to do. Move all my website files to /mnt and have the web server point to that. Any suggestions? If it helps here is what my fstab looks like as well. root@myserver:/var# mount -l /dev/sda1 on / type ext3 (rw) [cloudimg-rootfs] proc on /proc type proc (rw,noexec,nosuid,nodev) none on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /dev type devtmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) none on /dev/shm type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) /dev/sda2 on /mnt type ext3 (rw) /dev/sdf on /var2 type ext4 (rw,noatime) I hope this question makes sense. Basically i want my old files on this new partition. Thanks in advance

  Read the article

• OCZ Vertex 2 not recognized by Ubuntu installer

  - by Zsub

  As I boot into the Ubuntu 10.10 (or 11.04, doesn't matter) live environment or installer, it just refuses to recognise my Vertex 2. It reports the disk as ATA and not supporting smart, shows no serial number, and doesn't list the size correctly. All fdisk tells me is Unable to read /dev/sda (it's the only storage in the PC). I'm now running a temporary install of Windows 7 off of it, which worked like a charm, so where am I going wrong with Ubuntu... Specs: Asus M4N68T-M LE V2 (BIOS 0702, most recent) OCZ Vertex 2 SSD 60 GB Amd Athlon II X4 640 Patriot PSD34G13332 4GB DDR3 ram (two banks) EDIT I installed a second drive, installed Ubuntu on that and booted, it recognised the SSD just fine. I'm now trying to apt-get upgrade the live-environment. I wonder if there is any way to sort of install Ubuntu from Ubuntu (I boot into the working install on the other drive, install it on the SSD and then boot from the SSD). EDIT2 Ok, so that doesn't work. The install detects the SSD, however, it cannot format it. EDIT3 After a fresh boot I can read out SMART-data and even perform a read-benchmark, but if I try to format it, or do a write-bench, it'll crap out and after that it says SMART is not supported. So basically it seems I can't write to the disk, as it will stop working when I do, I will try to run repeated read-benchmarks to see if that has any effect. EDIT4 I'm running several read benchmarks on the drive right now, they give results that are to be expected from an SSD. If the read-benches don't fail, I can use fdisk on the disk, but it is now stuck trying to re-read the partition table after issueing the 'w' command. EDIT5 Parted Magic did recognize the drive and with hdparm -I even could tell me the drive was in a frozen state. I powercycled it (just pull out the plug from the SSD and plug it back in) and it wasn't frozen anymore. After that I could upgrade the firmware on the drive (still using Parted Magic) and format it to Ext4. After I rebooted into the Ubuntu installer, it wouldn't get recognized and hdparm didn't want to talk to it saying HDIO_DRIVE_CMD(identify) failed: Invalid exchange. EDIT6 For some reason if I enable one of the RAID controllers (the one the SSD is connected to, obviously) Ubuntu will let me format it, mount it and write to it. The installer also recognizes it. However if the raid controller is enabled but no array is defined the motherboard can't boot from it :(

  Read the article

• Moving windows-2003 hdd into virtual machine - with HDD shrink

  - by jm666

  Before you vote to close as exact duplicate, please read the full question. I was already read: Can I make a virtual machine out of a Windows XP physical machine? Disk2vhd,convert my PC to Hyper-V Virtual Machine Creating a Windows Virtual PC image from a Physical machine physical machine to virtual machine and place into VirtualBox BSOD trying to migrate Windows XP from a physical to a virtual machine http://en.wikipedia.org/wiki/Physical-to-Virtual and all other similiar questions here and several external sites too Unfortunately, don't find answer for my problem. I have an physical machine with 500GB HDD, on what is installed old Windows-2003 server with one server application. The application is like the windows itself, too old, no support for it today, haven't installation media and so on.. ;( On the HDD it is used only approx. 100MB (maybe less when will delete all unnecessary files). Want convert the the machine into the VirtualBox, and the VirtualBox should run on the same machine. Is possible to do this with the next steps? I can attach another HDD (via USB or internally) Boot an live Linux from CD, mount HDDs Run "something" on the Linux (the above wikipedia article have many pointer for the SW) for the conversion and store the image on the USB HDD - unfortunately, many of tools uses some specialty what exists in Windows-XP and above. No informations about Windows-2003 server, so what is an working solution for Windows-2003? try boot the virtual image with VirtualBox when it will run ok, remove the old installation, install Linux on the old 500GB hdd, copy the image and run.. The above should works (i hope), but the problems: i currently have only 320GB external USB hdd. (ofc, i can remove it from a box and enter it as internal HDD too) so, for the conversion I looking for the on the fly HDD shrink, so while moving the physical 500GB HDD need shrink it into smaller HDD - as i told above, only 100MB is used Exists something for this? (free) - or the only way is buying and larger 1TB hdd and using it for the conversion? Another question are: is anybody have real experience with windows-2003 conversion into VirtualBox? Looking for an answer from someone who really doing it and can figure out real pitfalls. (googling can do myself). exists here better approach for the solution?

  Read the article

• Is dual-booting an OS more or less secure than running a virtual machine?

  - by Mark

  I run two operating systems on two separate disk partitions on the same physical machine (a modern MacBook Pro). In order to isolate them from each other, I've taken the following steps: Configured /etc/fstab with ro,noauto (read-only, no auto-mount) Fully encrypted each partition with a separate encryption key (committed to memory) Let's assume that a virus infects my first partition unbeknownst to me. I log out of the first partition (which encrypts the volume), and then turn off the machine to clear the RAM. I then un-encrypt and boot into the second partition. Can I be reasonably confident that the virus has not / cannot infect both partitions, or am I playing with fire here? I realize that MBPs don't ship with a TPM, so a boot-loader infection going unnoticed is still a theoretical possibility. However, this risk seems about equal to the risk of the VMWare/VirtualBox Hypervisor being exploited when running a guest OS, especially since the MBP line uses UEFI instead of BIOS. This leads to my question: is the dual-partitioning approach outlined above more or less secure than using a Virtual Machine for isolation of services? Would that change if my computer had a TPM installed? Background: Note that I am of course taking all the usual additional precautions, such as checking for OS software updates daily, not logging in as an Admin user unless absolutely necessary, running real-time antivirus programs on both partitions, running a host-based firewall, monitoring outgoing network connections, etc. My question is really a public check to see if I'm overlooking anything here and try to figure out if my dual-boot scheme actually is more secure than the Virtual Machine route. Most importantly, I'm just looking to learn more about security issues. EDIT #1: As pointed out in the comments, the scenario is a bit on the paranoid side for my particular use-case. But think about people who may be in corporate or government settings and are considering using a Virtual Machine to run services or applications that are considered "high risk". Are they better off using a VM or a dual-boot scenario as I outlined? An answer that effectively weighs any pros/cons to that trade-off is what I'm really looking for in an answer to this post. EDIT #2: This question was partially fueled by debate about whether a Virtual Machine actually protects a host OS at all. Personally, I think it does, but consider this quote from Theo de Raadt on the OpenBSD mailing list: x86 virtualization is about basically placing another nearly full kernel, full of new bugs, on top of a nasty x86 architecture which barely has correct page protection. Then running your operating system on the other side of this brand new pile of shit. You are absolutely deluded, if not stupid, if you think that a worldwide collection of software engineers who can't write operating systems or applications without security holes, can then turn around and suddenly write virtualization layers without security holes. -http://kerneltrap.org/OpenBSD/Virtualization_Security By quoting Theo's argument, I'm not endorsing it. I'm simply pointing out that there are multiple perspectives here, so I'm trying to find out more about the issue.

  Read the article

• Ubuntu hard disk problem

  - by Henadzy

  Hello! I have got the error with a hard disk on Ubuntu 9.10. It slows down my system, applications have not been responding for a long time. But when I mount and use filesystem which placed on this hard disk at other computer it works properly. disk: SAMSUNG HD161HJ (SATA) syslog: Apr 25 00:28:25 vare6gin kernel: [ 885.773839] ata3.00: exception Emask 0x1 SAct 0x1e SErr 0x0 action 0x6 frozen Apr 25 00:28:25 vare6gin kernel: [ 885.773845] ata3.00: Ata error. fis:0x21 Apr 25 00:28:25 vare6gin kernel: [ 885.773861] ata3.00: cmd 60/08:08:3f:00:ad/00:00:10:00:00/40 tag 1 ncq 4096 in Apr 25 00:28:25 vare6gin kernel: [ 885.773864] res 51/40:24:67:c8:91/40:00:05:00:00/40 Emask 0x9 (media error) Apr 25 00:28:25 vare6gin kernel: [ 885.773871] ata3.00: status: { DRDY ERR } Apr 25 00:28:25 vare6gin kernel: [ 885.773877] ata3.00: error: { UNC } Apr 25 00:28:25 vare6gin kernel: [ 885.773890] ata3.00: cmd 60/18:10:9f:6b:ed/00:00:0e:00:00/40 tag 2 ncq 12288 in Apr 25 00:28:25 vare6gin kernel: [ 885.773893] res 51/40:24:67:c8:91/40:00:05:00:00/40 Emask 0x9 (media error) Apr 25 00:28:25 vare6gin kernel: [ 885.773900] ata3.00: status: { DRDY ERR } Apr 25 00:28:25 vare6gin kernel: [ 885.773904] ata3.00: error: { UNC } Apr 25 00:28:25 vare6gin kernel: [ 885.773918] ata3.00: cmd 60/08:18:3f:5f:ed/00:00:0e:00:00/40 tag 3 ncq 4096 in Apr 25 00:28:25 vare6gin kernel: [ 885.773921] res 51/40:24:67:c8:91/40:00:05:00:00/40 Emask 0x9 (media error) Apr 25 00:28:25 vare6gin kernel: [ 885.773927] ata3.00: status: { DRDY ERR } Apr 25 00:28:25 vare6gin kernel: [ 885.773932] ata3.00: error: { UNC } Apr 25 00:28:25 vare6gin kernel: [ 885.773946] ata3.00: cmd 60/08:20:67:c8:91/00:00:05:00:00/40 tag 4 ncq 4096 in Apr 25 00:28:25 vare6gin kernel: [ 885.773948] res 51/40:24:67:c8:91/40:00:05:00:00/40 Emask 0x9 (media error) Apr 25 00:28:25 vare6gin kernel: [ 885.773955] ata3.00: status: { DRDY ERR } Apr 25 00:28:25 vare6gin kernel: [ 885.773960] ata3.00: error: { UNC } Apr 25 00:28:25 vare6gin kernel: [ 885.773970] ata3: hard resetting link Apr 25 00:28:25 vare6gin kernel: [ 885.773974] ata3: nv: skipping hardreset on occupied port Apr 25 00:28:25 vare6gin kernel: [ 886.240073] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 25 00:28:25 vare6gin kernel: [ 886.256277] ata3.00: configured for UDMA/133 Apr 25 00:28:25 vare6gin kernel: [ 886.256305] ata3: EH complete Apr 25 00:28:27 vare6gin kernel: [ 888.176088] ata3: EH in SWNCQ mode,QC:qc_active 0xF sactive 0xF Apr 25 00:28:27 vare6gin kernel: [ 888.176099] ata3: SWNCQ:qc_active 0xF defer_bits 0x0 last_issue_tag 0x3 Apr 25 00:28:27 vare6gin kernel: [ 888.176102] dhfis 0xF dmafis 0x1 sdbfis 0x0 Apr 25 00:28:27 vare6gin kernel: [ 888.176109] ata3: ATA_REG 0x51 ERR_REG 0x40 Apr 25 00:28:27 vare6gin kernel: [ 888.176113] ata3: tag : dhfis dmafis sdbfis sacitve Apr 25 00:28:27 vare6gin kernel: [ 888.176120] ata3: tag 0x0: 1 1 0 1 Apr 25 00:28:27 vare6gin kernel: [ 888.176126] ata3: tag 0x1: 1 0 0 1 Apr 25 00:28:27 vare6gin kernel: [ 888.176131] ata3: tag 0x2: 1 0 0 1 Apr 25 00:28:27 vare6gin kernel: [ 888.176136] ata3: tag 0x3: 1 0 0 1

  Read the article

• Ubuntu hard disk problem

  - by Henadzy

  Hello! I have got the error with a hard disk on Ubuntu 9.10. It slows down my system, applications have not been responding for a long time. But when I mount and use filesystem which placed on this hard disk at other computer it works properly. disk: SAMSUNG HD161HJ (SATA) syslog: Apr 25 00:28:25 vare6gin kernel: [ 885.773839] ata3.00: exception Emask 0x1 SAct 0x1e SErr 0x0 action 0x6 frozen Apr 25 00:28:25 vare6gin kernel: [ 885.773845] ata3.00: Ata error. fis:0x21 Apr 25 00:28:25 vare6gin kernel: [ 885.773861] ata3.00: cmd 60/08:08:3f:00:ad/00:00:10:00:00/40 tag 1 ncq 4096 in Apr 25 00:28:25 vare6gin kernel: [ 885.773864] res 51/40:24:67:c8:91/40:00:05:00:00/40 Emask 0x9 (media error) Apr 25 00:28:25 vare6gin kernel: [ 885.773871] ata3.00: status: { DRDY ERR } Apr 25 00:28:25 vare6gin kernel: [ 885.773877] ata3.00: error: { UNC } Apr 25 00:28:25 vare6gin kernel: [ 885.773890] ata3.00: cmd 60/18:10:9f:6b:ed/00:00:0e:00:00/40 tag 2 ncq 12288 in Apr 25 00:28:25 vare6gin kernel: [ 885.773893] res 51/40:24:67:c8:91/40:00:05:00:00/40 Emask 0x9 (media error) Apr 25 00:28:25 vare6gin kernel: [ 885.773900] ata3.00: status: { DRDY ERR } Apr 25 00:28:25 vare6gin kernel: [ 885.773904] ata3.00: error: { UNC } Apr 25 00:28:25 vare6gin kernel: [ 885.773918] ata3.00: cmd 60/08:18:3f:5f:ed/00:00:0e:00:00/40 tag 3 ncq 4096 in Apr 25 00:28:25 vare6gin kernel: [ 885.773921] res 51/40:24:67:c8:91/40:00:05:00:00/40 Emask 0x9 (media error) Apr 25 00:28:25 vare6gin kernel: [ 885.773927] ata3.00: status: { DRDY ERR } Apr 25 00:28:25 vare6gin kernel: [ 885.773932] ata3.00: error: { UNC } Apr 25 00:28:25 vare6gin kernel: [ 885.773946] ata3.00: cmd 60/08:20:67:c8:91/00:00:05:00:00/40 tag 4 ncq 4096 in Apr 25 00:28:25 vare6gin kernel: [ 885.773948] res 51/40:24:67:c8:91/40:00:05:00:00/40 Emask 0x9 (media error) Apr 25 00:28:25 vare6gin kernel: [ 885.773955] ata3.00: status: { DRDY ERR } Apr 25 00:28:25 vare6gin kernel: [ 885.773960] ata3.00: error: { UNC } Apr 25 00:28:25 vare6gin kernel: [ 885.773970] ata3: hard resetting link Apr 25 00:28:25 vare6gin kernel: [ 885.773974] ata3: nv: skipping hardreset on occupied port Apr 25 00:28:25 vare6gin kernel: [ 886.240073] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 25 00:28:25 vare6gin kernel: [ 886.256277] ata3.00: configured for UDMA/133 Apr 25 00:28:25 vare6gin kernel: [ 886.256305] ata3: EH complete Apr 25 00:28:27 vare6gin kernel: [ 888.176088] ata3: EH in SWNCQ mode,QC:qc_active 0xF sactive 0xF Apr 25 00:28:27 vare6gin kernel: [ 888.176099] ata3: SWNCQ:qc_active 0xF defer_bits 0x0 last_issue_tag 0x3 Apr 25 00:28:27 vare6gin kernel: [ 888.176102] dhfis 0xF dmafis 0x1 sdbfis 0x0 Apr 25 00:28:27 vare6gin kernel: [ 888.176109] ata3: ATA_REG 0x51 ERR_REG 0x40 Apr 25 00:28:27 vare6gin kernel: [ 888.176113] ata3: tag : dhfis dmafis sdbfis sacitve Apr 25 00:28:27 vare6gin kernel: [ 888.176120] ata3: tag 0x0: 1 1 0 1 Apr 25 00:28:27 vare6gin kernel: [ 888.176126] ata3: tag 0x1: 1 0 0 1 Apr 25 00:28:27 vare6gin kernel: [ 888.176131] ata3: tag 0x2: 1 0 0 1 Apr 25 00:28:27 vare6gin kernel: [ 888.176136] ata3: tag 0x3: 1 0 0 1

  Read the article

• Ubuntu server 10.04 doesn't boot into installed Gnome desktop automatically

  - by Tong Wang

  I've installed Ubuntu server 10.04 and then installed Gnome desktop on top of it, because I am new to Linux and its command line, I need the GUI desktop to help me get around. However, the problem I got is that the server doesn't boot into the GUI desktop when powered on. It's booting into a shell like this: Gave up waiting for root device. Common problems: - Boot args (cat /proc/cmdline) - Check rootdelay= (did the system wait long enought?) - check root= (did the system wait for the right device?) - Missing modules (cat /proc/modules; ls /dev) ALERT! /dev/mapper/cecdata-root does not exist. Dropping to a shell! BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) result of (cat /proc/cmdline) BOOT_IMAGE=/vmlinuz-2.6.32-28-server root=/dev/mapper/cecdata-root ro quiet Then I have type "exit" to exit the shell and then it boots into Gnome. Any idea what's wrong? Edit: add output for the following commands wt@cecdata:~$ ls /dev/mapper/ cecdata-root cecdata-swap_1 control wt@cecdata:~$ fdisk -l wt@cecdata:~$ wt@cecdata:~$ cat /etc/fstab # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 /dev/mapper/cecdata-root / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda1 during installation UUID=1635be41-d025-405e-b4a3-6f0abedb7aab /boot ext2 defaults 0 2 /dev/mapper/cecdata-swap_1 none swap sw 0 0 wt@cecdata:~$ Adding output for lsmod wt@cecdata:~$ lsmod Module Size Used by fbcon 39270 71 tileblit 2487 1 fbcon font 8053 1 fbcon bitblit 5811 1 fbcon softcursor 1565 1 bitblit dell_wmi 2177 0 dcdbas 6918 0 vga16fb 12757 1 vgastate 9857 1 vga16fb psmouse 64576 0 serio_raw 4950 0 power_meter 9473 0 bnx2 72874 0 lp 9336 0 parport 37160 1 lp mptsas 50592 2 usbhid 41116 0 mptscsih 37167 1 mptsas hid 83568 1 usbhid mptbase 91674 2 mptsas,mptscsih scsi_transport_sas 33021 1 mptsas

  Read the article

• How to remove iso 9660 from USB?

  - by a_m0d

  I have somehow managed to write an iso 9660 image onto my USB drive, which makes all my computer think that the device is actually a CD. I have tried various methods of removing this partition, but nothing seems to work. I have tried fdisk, which says $ fdisk -l /dev/sdb Cannot open /dev/sdb parted crashes when I try to use it on this device. I have even tried $ dd if=/dev/zero of=/dev/sdb but it just hangs with no output (either on screen or on disk). However, when I plug the USB in, it does mount, and I can view (but not edit) the files on it. edit: now the result is $ dd if=/dev/zero of=/dev/sdb dd: opening `/dev/sdb': Read-only file system I have also tried re-formatting it on Windows, but it gets to the end of the format process and then says "Couldn't format the drive". How can I remove this partition and get my whole USB drive back to normal again? EDIT 1: Trying a simple mkfs doesn't work: $ sudo mkfs -t vfat /dev/sdb mkfs.vfat 3.0.0 (28 Sep 2008) mkfs.vfat: Will not try to make filesystem on full-disk device '/dev/sdb' (use -I if wanted) I can't do mkfs on /dev/sdb1 because there is no such partition, as shown:$ ls /dev | grep sdb sdb EDIT 2: This is the information posted by dmesg when I plug the device in:$ dmesg . . (snip) . usb 2-1: New USB device found, idVendor=058f, idProduct=6387 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-1: Product: Mass Storage usb 2-1: Manufacturer: Generic usb 2-1: SerialNumber: G0905000000000010885 usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning usb-storage: device scan complete scsi 6:0:0:0: Direct-Access FLASH Drive AU_USB20 8.07 PQ: 0 ANSI: 2 sd 6:0:0:0: [sdb] 4069376 512-byte hardware sectors (2084 MB) sd 6:0:0:0: [sdb] Write Protect is off sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00 sd 6:0:0:0: [sdb] Assuming drive cache: write through sd 6:0:0:0: [sdb] 4069376 512-byte hardware sectors (2084 MB) sd 6:0:0:0: [sdb] Write Protect is off sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00 sd 6:0:0:0: [sdb] Assuming drive cache: write through sdb: unknown partition table sd 6:0:0:0: [sdb] Attached SCSI removable disk sd 6:0:0:0: Attached scsi generic sg2 type 0 ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A SELinux: initialized (dev sdb, type iso9660), uses genfs_contexts CE: hpet increasing min_delta_ns to 15000 nsec This shows that the device is formatted as ISO 9660 and that it is /dev/sdb. EDIT 3: This is the message that I find at the bottom of dmesg after running cfdisk and writing a new partition table to the disk:SELinux: initialized (dev sdb, type iso9660), uses genfs_contexts sd 17:0:0:0: [sdb] Device not ready: Sense Key : Not Ready [current] sd 17:0:0:0: [sdb] Device not ready: < ASC=0xff ASCQ=0xffASC=0xff < ASCQ=0xff end_request: I/O error, dev sdb, sector 0 Buffer I/O error on device sdb, logical block 0 lost page write due to I/O error on sdb

  Read the article

• Apache/Jboss Issue - is this connection timeout?

  - by user115391

  We have an application. The architecture is as below 1 load balancer (apache), which redirects to 2 app servers (jboss). The site is working fine and I am able to access it fine. But sometimes, randomly the homepage takes a while (like 30-40 secs) to load. I tried checking the logs but could not figure out why. I used the httptraffic analyzer, fiddler to see the traffic, but it just says the request/response took 30 secs or so. I checked the apache access logs, mod_jk.log. My configurations are below mod-jk.conf LoadModule jk_module modules/mod_jk.so JkWorkersFile conf/workers.properties JkLogFile logs/mod_jk.log #JkLogLevel info #JkLogLevel debug JkLogLevel error # Select the log format JkLogStampFormat "[%a %b %d %H:%M:%S %Y]" JkOptions +ForwardKeySize +ForwardURICompatUnparsed -ForwardDirectories JkRequestLogFormat "%w %V %T %P %{tid}P %D" JkMount /__application__/* loadbalancer JkUnMount /__application__/images/* loadbalancer <VirtualHost *:8080 > JkMountFile conf/uriworkermap.properties </VirtualHost> JkShmFile run/jk.shm <Location /jkstatus> JkMount status Order deny,allow Deny from all Allow from 127.0.0.1 </Location> ----------------------------- uriworkermap.properties Simple worker configuration file # Mount the Servlet context to the ajp13 worker /=loadbalancer /*=loadbalancer ----------------------------- workers.properties worker.list=loadbalancer,status worker.template.port=8009 worker.template.type=ajp13 worker.template.lbfactor=1 worker.template.prepost_timeout=10000 worker.template.connect_timeout=10000 worker.template.ping_mode=A worker.worker1.reference=worker.template worker.worker1.host=hostname1 worker.worker2.reference=worker.template worker.worker2.host=hostname2 worker.loadbalancer.type=lb worker.loadbalancer.balance_workers=worker1,worker2 worker.status.type=status ----------------------------- my jboss server.xml - $JBOSS_HOME/server/default/deploy/jbossweb.sar/server.xml --------------------------------- The logs from access log is below The issue where it took time - look at the seconds column [23/Mar/2012:12:10:38 -0400] "GET / HTTP/1.1" 200 138 x.x.x.x - - [23/Mar/2012:12:10:49 -0400] "GET /index.jsp HTTP/1.1" 302 - x.x.x.x - - [23/Mar/2012:12:11:10 -0400] "GET /home.jsp HTTP/1.1" 200 936 x.x.x.x - - [23/Mar/2012:12:11:31 -0400] "POST /login/ HTTP/1.1" 200 8895 x.x.x.x - - [23/Mar/2012:12:11:52 -0400] "GET /login/includes/login-style.css HTTP/1.1" 304 - The one after the issue x.x.x.x - - [23/Mar/2012:12:12:18 -0400] "GET / HTTP/1.1" 200 138 x.x.x.x - - [23/Mar/2012:12:12:18 -0400] "GET /index.jsp HTTP/1.1" 302 - x.x.x.x - - [23/Mar/2012:12:12:18 -0400] "GET /home.jsp HTTP/1.1" 200 936 x.x.x.x - - [23/Mar/2012:12:12:18 -0400] "POST /login/ HTTP/1.1" 200 8895 x.x.x.x - - [23/Mar/2012:12:12:18 -0400] "GET /login/includes/login-style.css HTTP/1.1" 304 - Would it be a cache or timeout issue? Any help is appreciated. Thanks.

  Read the article

• AD GIT SELinux RHEL 6 : Can not get SELinux to allow connetion to git

  - by Johan Sörell

  I have a problem with SELinux! I have installed git on Red Hat Enterprise 6 with AD group control and SSL Cert . Everything works fine if I do setenforce 0 ( set SELinux in detection only mode ) or if I do semanage permissive -a httpd_t (Set httpd_t in detection only mode) I do not want to use this on my git production server. Is there anyone out there who can help we with SELinux? Below is some info that you might need to be able to help me: All help I can get would be apriciated: This is the output of ls -lZa /preproduction/git/repositories/ ls -lZa /preproduction/git/repositories/ drwxr-xr-x. apache apache unconfined_u:object_r:httpd_sys_rw_content_t:s0 . drwxr-xr-x. apache apache unconfined_u:object_r:file_t:s0 .. drwxr-xr-x. apache apache unconfined_u:object_r:httpd_sys_rw_content_t:s0 playground drwxr-xr-x. apache apache unconfined_u:object_r:httpd_sys_rw_content_t:s0 shamrock.git drwxr-xr-x. apache apache unconfined_u:object_r:httpd_sys_rw_content_t:s0 test Here is the out put of getsebool -a |grep -i httpd getsebool -a |grep -i httpd allow_httpd_anon_write --> off allow_httpd_mod_auth_ntlm_winbind --> off allow_httpd_mod_auth_pam --> off allow_httpd_sys_script_anon_write --> off httpd_builtin_scripting --> on httpd_can_check_spam --> off httpd_can_network_connect --> off httpd_can_network_connect_cobbler --> off httpd_can_network_connect_db --> off httpd_can_network_memcache --> off httpd_can_network_relay --> off httpd_can_sendmail --> off httpd_dbus_avahi --> on httpd_enable_cgi --> on httpd_enable_ftp_server --> off httpd_enable_homedirs --> off httpd_execmem --> off httpd_read_user_content --> off httpd_setrlimit --> off httpd_ssi_exec --> off httpd_tmp_exec --> off httpd_tty_comm --> on httpd_unified --> on httpd_use_cifs --> off httpd_use_gpg --> off httpd_use_nfs --> off Tis is the status of : sestatus sestatus SELinux status: enabled SELinuxfs mount: /selinux Current mode: enforcing Mode from config file: enforcing Policy version: 24 Policy from config file: targeted

  Read the article

• Mounting a drive in Ubuntu 9.10 (Karmic Koala)

  - by morpheous

  I have just installed Ubuntu on a machine that previously had XP installed on it. The machine has 2 HDD (hard disk drives). I opted to install Ubuntu completely over XP. I am new to Linux, and I am still learning how to navigate teh file structure. However, AFAICT), there is only one drive. I want to be able to store programs etc on the first drive, and store data (program output etc) on the second drive. It appears Ubuntu is not aware that I have 2 drives (on XP, these were drives C and D). How can I mount the second drive (ideally, I want to do this automatically on login, so that the drive is available to me whenever I login - withou manual intervention from me) In XP, I could refer to files on a specific drive by prefixing with the drive letter (e.g. c:\foobar.cpp and d:\foobar.dat). I suspect the notation on ubuntu is different. How may I specify specific files on different drives? Last but notbthe least (a bit unrelated to previous questions). This relates to direcory structure again. I am a developer (C++ for desktops and PHP for websites), I want to install the following apps/ libraries. i). Apache 2.2 ii). PHP 5.2.11 iii). MySQL (5.1) iv). SVN v). Netbeans vi). C++ development tools (gcc, gdb, emacs etc) vii). QT toolkit viii). Some miscellaeous scientific software (e.g. www.r-project.org, www.gnu.org/software/octave/) I would be grateful if a someone can recommend a directory layout for these applications. Regarding development, I would also be grateful if someone could point out where to store my project and source files i.e: (i) *.cpp, *.hpp, *.mak files for cpp projects (ii) individual websites On my XP machine the layout for C++ dev was like this: c:\dev\devtools (common libs and headers etc) c:\dev\workarea (root folder for projects) c:\dev\workarea\c++ (c++ projects) c:\dev\workarea\websites (web projects) I would like to create a similar folder structure on the linux machine, but its not clear whether to place these folders under /, /usr, /home or swomewhere else (there seems to be abffling number of choices, so I want to get it "right" first time - i.e having a directory structure that most developer use, so it is easier when communicating with other ubuntu/linux developers)

  Read the article

• How to use Hardware RAID in Ubuntu Server

  - by user2071938

  I have an Adaptec RAID-Controller and created an RAID-1(Mirroring) succesfully. Now I have installed Ubuntu Server 12.04.3. When I type fdisk -l I get this output: bf@fileserver:~$ sudo fdisk -l Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Disk /dev/sda doesn't contain a valid partition table Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Disk /dev/sdb doesn't contain a valid partition table Disk /dev/sdc: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0004c454 Device Boot Start End Blocks Id System /dev/sdc1 * 2048 499711 248832 83 Linux /dev/sdc2 501758 156301311 77899777 5 Extended /dev/sdc5 501760 156301311 77899776 8e Linux LVM Disk /dev/mapper/fileserver--vg-root: 75.6 GB, 75606523904 bytes 255 heads, 63 sectors/track, 9191 cylinders, total 147668992 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/fileserver--vg-root doesn't contain a valid partition table Disk /dev/mapper/ddf1_Data: 1000.1 GB, 1000065728512 bytes 255 heads, 63 sectors/track, 121584 cylinders, total 1953253376 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Disk /dev/mapper/ddf1_Data doesn't contain a valid partition table Disk /dev/mapper/fileserver--vg-swap_1: 4160 MB, 4160749568 bytes 255 heads, 63 sectors/track, 505 cylinders, total 8126464 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/fileserver--vg-swap_1 doesn't contain a valid partition table The 80 GB HDD is for the System The 1000.2 GB HDD should be for my data. But I'm a bit confused becauser there are listed two 1000.2 GB HDDs, due the Hardware RAID shoudln't there be only one HDD vissible to the OS? (I have two 1000.2 GB HDDs in an Raid-1 Array) dmraid gives me bf@fileserver:~$ sudo dmraid -r /dev/sdb: ddf1, ".ddf1_disks", GROUP, ok, 1953253376 sectors, data@ 0 /dev/sda: ddf1, ".ddf1_disks", GROUP, ok, 1953253376 sectors, data@ 0 so It seems to be ok? But how do I partitionate this disks and which one should I mount(sdb or sda?) Hope you can help me thx Florian

  Read the article

• Very poor read performance compared to write performance on md(raid1) / crypt(luks) / lvm

  - by Android5360

  I'm experiencing very poor read performance over raid1/crypt/lvm. In the same time, write speeds are about 2x+ faster on the same setup. On another raid1 setup on the same machine I get normal read speeds (maybe because I'm not using cryptsetup). OS related disks: sda + sdb. I have raid1 configuration with two disks, both are in place. I'm using LVM over the RAID. No encryption. Both disks are WD Green, 5400 rpm. IO test results on this raid1: dd if=/dev/zero of=/tmp/output.img3 bs=8k count=256k conv=fsync - 2147483648 bytes (2.1 GB) copied, 22.3392 s, 96.1 MB/s sync echo 3 > /proc/sys/vm/drop_caches dd if=/tmp/output.img3 of=/dev/null bs=8k - 2147483648 bytes (2.1 GB) copied, 15.9 s, 135 MB/s And here is the problematic setup (on the same machine). Currently I have only one sdc (WD Green, 5400rpm) configured in software raid1 + crypt (luks, serpent-xts-plain) + lvm. Tomorrow I will attach another disk (sdd) to complete this two-disk raid1 setup. IO tests results on this raid1: dd if=/dev/zero of=output.img3 bs=8k count=256k conv=fsync 2147483648 bytes (2.1 GB) copied, 17.7235 s, 121 MB/s sync echo 3 > /proc/sys/vm/drop_caches dd if=output.img3 of=/dev/null bs=8k 2147483648 bytes (2.1 GB) copied, 36.2454 s, 59.2 MB/s We can see that the read performance is very very bad (59MB/s compared to 135MB/s when using no encryption). Nothing is using the disks during benchmark. I can confirm this because I checked with iostat and dstat. Details on the hardware: disks: all are WD green, 5400rpm, 64mb cache. cpu: FX-8350 at stock speed ram: 4x4GB at 1066Mhz. Details on the software: OS: Debian Wheezy 7, amd64 mdadm: v3.2.5 - 18th May 2012 LVM version: 2.02.95(2) (2012-03-06) LVM Library version: 1.02.74 (2012-03-06) LVM Driver version: 4.22.0 cryptsetup: 1.4.3 Here is how I configured the slow raid1+crypt+lvm setup: parted /dev/sdc mklabel gpt type: ext4 start: 2048s end: -1 Now the raid, crypt and the lvm configuration: mdadm --create /dev/md1 --level=1 --raid-disks=2 missing /dev/sdc cryptsetup --cipher serpent-xts-plain luksFormat /dev/md1 cryptsetup luksOpen /dev/md1 md1_crypt vgcreate vg_sql /dev/mapper/md1_crypt lvcreate -l 100%VG vg_sql -n lv_sql mkfs.ext4 /dev/mapper/vg_sql-lv-sql mount /dev/mapper/vg_sql-lv_sql /sql So guys, can you help me identify the reason and fix it? It has to be something with the cryptsetup as there is no such read slowdown on the other setup (sda+sdb) where no encryption is present. But I have no idea what to do. Thanks!

  Read the article

• Safer RAID5 rebuilds using partially failed disks?

  - by arcticmac

  There have been lots of articles posted recently about how RAID5 is dangerous because of long resilver times, and in particular because of increasing chances of encountering a URE during the resilver. Obviously this is a significant concern. However, it seems that in many cases of interest (as long as you're keeping some kind of eye on your disks), when it comes time to rebuild the array, the disk that I'm replacing is still mostly readable. If you try to explain this predicament to the average layperson, they are typically very confused as to why you have two almost completely functional disks but can't produce one working array. It seems to me that there ought to be some way to take advantage of this to make rebuilds safer, as long as I'm willing to have the RAID5 be read-only for a couple of days while it rebuilds. Conceptually, what I have in mind looks something like this: When a disk fails, immediately take the RAID5 offline or mount it read-only Attach a new disk (either in a spare bay, or externally via eSATA) and begin rebuilding it to replace the failed one. If known, perhaps start with the stripes in which the failure occurred, to minimize the chances of losing those if another disk fails. In the event that a second disk experiences a URE or other failure during the rebuild, try to source that data from the disk that is being replaced. Presumably if this happens, more rebuilding would be necessary. When complete, shut down the server, swap the replacement drive into the original bay if desired, and bring the array back up. Obviously such a process would not be appropriate for applications where uptime is critical or data loss cannot be tolerated, but it seems to me that this could help considerably to improve the reliability of RAID5. I assume that there's not a good way to implement a recovery like this at present, given that I haven't seen any indication of tools that are designed to do this, and that it seems like it would be rather obtuse to work out manually. Are there also technical issues with it that I haven't thought of (I'm still fairly new to RAID stuff)? Any thoughts on how hard something like this would be to implement (e.g. in linux md raid)?

  Read the article

• prevent filesystem from entering read-only mode

  - by user788171

  I have found that my server's filesystem is continuously entering read-only mode. There have been some issues with the raid1 array, but I have removed the bad disk from the array. However, it is still physically plugged into the system because I haven't had a chance to go over to the datacentre, I suspect udev and the system kernel is still picking up the bad disk and throwing errors. In /var/log/messages, there are errors like this: Mar 2 06:53:14 nocloud kernel: ata1: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0xe frozen Mar 2 06:53:14 nocloud kernel: ata1: irq_stat 0x00400040, connection status changed Mar 2 06:53:14 nocloud kernel: ata1: SError: { PHYRdyChg DevExch } Mar 2 06:53:14 nocloud kernel: ata1: hard resetting link Mar 2 06:53:20 nocloud kernel: ata1: link is slow to respond, please be patient (ready=0) Mar 2 06:53:21 nocloud kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 2 06:53:21 nocloud kernel: ata1.00: configured for UDMA/133 Mar 2 06:53:21 nocloud kernel: ata1: EH complete This happens fairly randomly throughout the day until eventually the filesystem becomes read-only. When this happens, my system becomes non-operational which kind of defeats the purpose of having a raid1. Note, ata1 is the bad disk (I think ata1 corresponds to /dev/sda because they are both first in line). Under mdadm, /dev/sda1,2 is no longer being used, but I can't prevent the system kernel from continuing to query that disk when I am no longer using it and throwing these errors. Is there a way to prevent my filesystem from automatically going into read-only mode? Furthermore, is it safe to do so? Thanks in advance. EDIT: Additional information: output from cat /proc/mdstat md1 : active raid1 sdb2[1] 976554876 blocks super 1.1 [2/1] [_U] bitmap: 5/8 pages [20KB], 65536KB chunk md0 : active raid1 sdb1[1] 204788 blocks super 1.0 [2/1] [_U] Output from mount: /dev/mapper/VolGroup-LogVol00 on / type ext4 (rw,noatime) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) tmpfs on /dev/shm type tmpfs (rw,rootcontext="system_u:object_r:tmpfs_t:s0") /dev/md0 on /boot type ext4 (rw) none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw) EDIT2: pvdisplay output: --- Physical volume --- PV Name /dev/md1 VG Name VolGroup PV Size 931.32 GiB / not usable 2.87 MiB Allocatable yes (but full) PE Size 16.00 MiB Total PE 59604 Free PE 0 Allocated PE 59604

  Read the article

• Perl missing while installing nginx on centos

  - by Ahoura Ghotbi

  I am trying to install nginx on my server, however it keeps returning "./configure: error: perl 5.6.1 or higher is required" eventhough I have perl v5.8.8!!!! I have already downloaded perl and trying to configure it using the following command : ./configure --with-http_stub_status_module --with-http_perl_module --with-http_flv_module --add-module=nginx_mod_h264_streaming here is the output : [root@fst nginx-0.8.55]# ./configure --with-http_stub_status_module --with-http_perl_module --with-http_flv_module --add-module=nginx_mod_h264_streaming checking for OS + Linux 2.6.18-308.el5 x86_64 checking for C compiler ... found + using GNU C compiler + gcc version: 4.1.2 20080704 (Red Hat 4.1.2-52) checking for gcc -pipe switch ... found checking for gcc builtin atomic operations ... found checking for C99 variadic macros ... found checking for gcc variadic macros ... found checking for unistd.h ... found checking for inttypes.h ... found checking for limits.h ... found checking for sys/filio.h ... not found checking for sys/param.h ... found checking for sys/mount.h ... found checking for sys/statvfs.h ... found checking for crypt.h ... found checking for Linux specific features checking for epoll ... found checking for sendfile() ... found checking for sendfile64() ... found checking for sys/prctl.h ... found checking for prctl(PR_SET_DUMPABLE) ... found checking for sched_setaffinity() ... found checking for crypt_r() ... found checking for sys/vfs.h ... found checking for nobody group ... found checking for poll() ... found checking for /dev/poll ... not found checking for kqueue ... not found checking for crypt() ... not found checking for crypt() in libcrypt ... found checking for F_READAHEAD ... not found checking for posix_fadvise() ... found checking for O_DIRECT ... found checking for F_NOCACHE ... not found checking for directio() ... not found checking for statfs() ... found checking for statvfs() ... found checking for dlopen() ... not found checking for dlopen() in libdl ... found checking for sched_yield() ... found checking for SO_SETFIB ... not found configuring additional modules adding module in nginx_mod_h264_streaming + ngx_http_h264_streaming_module was configured checking for PCRE library ... found checking for system md library ... not found checking for system md5 library ... not found checking for OpenSSL md5 crypto library ... found checking for zlib library ... found checking for perl + perl version: v5.8.8 built for x86_64-linux-thread-multi ./configure: error: perl 5.6.1 or higher is required

  Read the article

• xen-create-image does not create inird or initramfs image and domU does not starts with system image

  - by user219372

  I have Fedora 19 as Dom0. To create image I run # xen-create-image --hostname=debian-wheezy --memory=512Mb --dhcp --size=20Gb --swap=512Mb --dir=/xen --arch=amd64 --dist=wheezy After generation finished I start vm and see: # xl create /etc/xen/debian-wheezy.cfg Parsing config from /etc/xen/debian-wheezy.cfg libxl: error: libxl_dom.c:409:libxl__build_pv: xc_dom_ramdisk_file failed: No such file or directory libxl: error: libxl_create.c:919:domcreate_rebuild_done: cannot (re-)build domain: -3 In the /etc/xen/debian-wheezy.cfg i have # # Kernel + memory size # kernel = '/boot/vmlinuz-3.11.2-201.fc19.x86_64' ramdisk = '/boot/initrd.img-3.11.2-201.fc19.x86_64' and ls -1 /boot/*201* shows /boot/config-3.11.2-201.fc19.x86_64 /boot/initramfs-3.11.2-201.fc19.x86_64.img /boot/System.map-3.11.2-201.fc19.x86_64 /boot/vmlinuz-3.11.2-201.fc19.x86_64 Then if I fix ramdisk directive in .cfg file to /boot/initramfs-3.11.2-201.fc19.x86_64.img vm will start but os inside will not boot. In a tail of xl console I get [ OK ] Reached target Basic System. dracut-initqueue[130]: Warning: Could not boot. dracut-initqueue[130]: Warning: /dev/disk/by-uuid/085883ad-73ca-45cc-8bc5-e6249f869b26 does not exist dracut-initqueue[130]: Warning: /dev/fedora/root does not exist dracut-initqueue[130]: Warning: /dev/fedora/swap does not exist dracut-initqueue[130]: Warning: /dev/mapper/fedora-root does not exist dracut-initqueue[130]: Warning: /dev/mapper/fedora-swap does not exist dracut-initqueue[130]: Warning: /dev/xvda2 does not exist Starting Dracut Emergency Shell... Warning: /dev/disk/by-uuid/085883ad-73ca-45cc-8bc5-e6249f869b26 does not exist Warning: /dev/fedora/root does not exist Warning: /dev/fedora/swap does not exist Warning: /dev/mapper/fedora-root does not exist Warning: /dev/mapper/fedora-swap does not exist Warning: /dev/xvda2 does not exist Generating "/run/initramfs/sosreport.txt" Entering emergency mode. Exit the shell to continue. Type "journalctl" to view system logs. You might want to save "/run/initramfs/sosreport.txt" to a USB stick or /boot after mounting them and attach it to a bug report. dracut:/# .img files in /xen/domains/debian-wheezy exists and listed in disk section of debian-wheezy.cfg So what should i do? Update: I've found that xl does not mount images. In debian-wheezy.cfg I have that: root = '/dev/xvda2 ro' disk = [ 'file:/xen/domains/debian-wheezy/disk.img,xvda2,w', 'file:/xen/domains/debian-wheeze/swap.img,xvda1,w', ] And there is no /dev/xvda* or /dev/sda* or /dev/hda* files in VM.

  Read the article

• Restore single users Exchange 2003 mailbox from backup

  - by Campo

  I take weekly backups of exchange in full. I also take complete weekly backups of the entire server. It is a Server 2003 R2 with AD and Exchange 2003 all on one box. One users inbox has disappeared. She has 19000+ junk items now. It is possible the inbox got mixed into the junk. Regardless it is such a huge mess she is not going to go through all of that.... I want to restore he mailbox from the backup. I followed this MS KB http://support.microsoft.com/kb/823176 I had to use Method 3. I have a VM of Server 2003 R2 with exchange but I am having failures on the restore from NT backup. The backup log just states to check the application log.... Application log points to backup log... Only info Is failed to restore Only thing different is the computer name... The only error I can find is in the Application log. Information Store Database not found All others just say that the backup failed. Any assistance is greatly appreciated. UPDATE I have successfully proven I can restore the DB into a recovery storage group in my VM Unfortunately due to the actual account being on a different store I am unable to do the recovery... Error is The attempt to log on to the Microsoft Exchange Server computer has failed. The MAPI provider failed. Microsoft Exchange Server Information Store ID no: 8004011d-0512-00000000 Two questions QUESTION 1 Should I repeat my steps on the production exchange server in the recover storage group? then merge into her original account? I am just concerned with doing recovery like that on the live server.... QUESTION 2 Is there any way I can extract her .PST from my recovery VM and then import into her outlook? On the Recovery VM: I restored the raw DB from my full backup repaired it with ESEUTIL then mounted in the recovery store. Was thinking I could just repeat and mount in the main store on the VM? Thanks for the suggestions.

  Read the article

• recommendations for efficient offsite remote backup solution of vm's

  - by senorsmile

  I am looking for recommendations for backing up my current 6 vm's(and soon to grow to up to 20). Currently I am running a two node proxmox cluster(which is a debian base using kvm for virtualization with a custom web front end to administer). I have two nearly identical boxes with amd phenom II x4's and asus motherboards. Each has 4 500 GB sata2 hdd's, 1 for the os and other data for the proxmox install, and 3 using mdadm+drbd+lvm to share the 1.5 TB's of storage between the two machines. I mount lvm images to kvm for all of the virtual machines. I currently have the ability to do live transfer from one machine to the other, typically within seconds(it takes about 2 minutes on the largest vm running win2008 with m$ sql server). I am using proxmox's built-in vzdump utility to take snapshots of the vm's and store those on an external harddrive on the network. I then have jungledisk service (using rackspace) to sync the vzdump folder for remote offsite backup. This is all fine and dandy, but it's not very scalable. For one, the backups themselves can take up to a few hours every night. With jungledisk's block level incremental transfers, the sync only transfers a small portion of the data offsite, but that still takes at least a half an hour. The much better solution would of course be something that allows me to instantly take the difference of two time points (say what was written from 6am to 7am), zip it, then send that difference file to the backup server which would instantly transfer to the remote storage on rackspace. I have looked a little into zfs and it's ability to do send/receive. That coupled with a pipe of the data in bzip or something would seem perfect. However, it seems that implementing a nexenta server with zfs would essentially require at least one or two more dedicated storage servers to serve iSCSI block volumes (via zvol's???) to the proxmox servers. I would prefer to keep the setup as minimal as possible (i.e. NOT having separate storage servers) if at all possible. I have also briefly read about zumastor. It looks like it could also do what I want, but it appears to have halted development in 2008. So, zfs, zumastor or other?

  Read the article

< Previous Page | 96 97 98 99 100 101 102 103 104 105 106  | Next Page >