Search Results

Search found 13437 results on 538 pages for 'trusted root certificates'.

Page 100/538 | < Previous Page | 96 97 98 99 100 101 102 103 104 105 106 107  | Next Page >

• Free space in tmpfs partition not adding up

  - by Dean Herbert

  I have had my /tmp/ partition filling up recently when it should not be anywhere near full. On further investigation, I found that the partition was listing free space a lot lower than it should be. I am guessing a remount will fix this, but am very curious as to why this has happened and where this space has gone. du output: root@odoroki:/tmp# du --summarize -h 3.3M . df output: root@odoroki:/tmp# df -h /tmp Filesystem Size Used Avail Use% Mounted on tmpfs 3.9G 3.3G 653M 84% /tmp Update: after deleting some files it has happened again. du output: root@odoroki:/tmp# du -h --summarize 11M . df output: root@odoroki:/tmp# df -h /tmp Filesystem Size Used Avail Use% Mounted on tmpfs 3.9G 3.9G 0 100% /tmp I have a feeling this has started since a recent apt-get upgrade, but it still seems like strange behaviour. I did do a quick scan over lsof output and couldn't see any open/stuck file handles. Unfortunately due to the seriousness of the issue I had to reboot the server, after which usage seems to match correctly.

  Read the article

• No Wireless In Ubuntu 13.10

  - by viktorhubinette

  When I upgraded to Ubuntu 13.10, I can't connect to wireless. The only thing I can connect to is ethernet, so please help me, What should I do? Here is the output of the lspci -nnk | grep -i net -A2 00:19.0 ethernet controller [0200]:intel corporation 82579V Gigabit network connection [8086:1503] (rev 04) subsystem: acer incorporated [ALI Device] [1025:8000] Kernel driver in use : e100e output of lsusb: Bus 002 Device 003: ID 046d:c31c Logitech, Inc. Keyboard K120 for Business Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 0bda:0152 Realtek Semiconductor Corp. Mass Storage Device Bus 001 Device 040: ID 04e8:6863 Samsung Electronics Co., Ltd Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 004: ID 0bda:8178 Realtek Semiconductor Corp. RTL8192CU 802.11n WLAN Adapter Bus 003 Device 003: ID 045e:070f Microsoft Corp. Bus 003 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

  Read the article

• USB Ports In Wrong Mode, How To Use usbmodeswitch?

  - by user86872

  I haven't had access to my USB ports as media devices for a couple days now. I've been reading and researching everything I can find but I can't find a good guide for usbmodeswtich or usbms that I can decipher. The USB's are fine for power, but won't support my android phone as a media device, which is killing me because I use adb everyday, and won't support my plug and play mouse any longer. Not sure what caused the switch, though I think it may be related to the suspend issue I've read about, but the solutions in those threads I read also didn't work. Below is my system information and details. System: Ubuntu 12.04, 64-bit, Dedicated Machine Machine: HP-Pavillion g6 notebook, AMD A6 Quad Core Processor USBs used for: Cooling dock, Android Debug Bridge, Wireless Mouse Attempted Mod Probe, udev restart, unable to attempt lsusb due to my own lack of knowledge. :) Last Attempt Readout: ncandiano@ncandiano-HP-Pavilion-g6-Notebook-PC:~$ sudo modprobe -r usbhid && sleep 5 && sudo modprobe usbhid ncandiano@ncandiano-HP-Pavilion-g6-Notebook-PC:~$ sudo modprobe -r usb-storage ncandiano@ncandiano-HP-Pavilion-g6-Notebook-PC:~$ sudo modprobe usb-storage ncandiano@ncandiano-HP-Pavilion-g6-Notebook-PC:~$ sudo restart udev udev start/running, process 2624 ncandiano@ncandiano-HP-Pavilion-g6-Notebook-PC:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 0461:4de7 Primax Electronics, Ltd webcam Any help would be greatly appreciated!

  Read the article

• Very large log files, what should I do?

  - by Masroor

  (This question deals with a similar issue, but it talks about a rotated log file.) Today I got a system message regarding very low /var space. As usual I executed the commands in the line of sudo apt-get clean which improved the scenario only slightly. Then I deleted the rotated log files which again provided very little improvement. Upon examination I find that some log files in the /var/log has grown up to be very huge ones. To be specific, ls -lSh /var/log gives, total 28G -rw-r----- 1 syslog adm 14G Aug 23 21:56 kern.log -rw-r----- 1 syslog adm 14G Aug 23 21:56 syslog -rw-rw-r-- 1 root utmp 390K Aug 23 21:47 wtmp -rw-r--r-- 1 root root 287K Aug 23 21:42 dpkg.log -rw-rw-r-- 1 root utmp 287K Aug 23 20:43 lastlog As we can see, the first two are the offending ones. I am mildly surprised why such large files have not been rotated. So, what should I do? Simply delete these files and then reboot? Or go for some more prudent steps? I am using Ubuntu 14.04.

  Read the article

• User "oracle" unable to start or stop listeners

  - by user12620111

  Recently ran into a problem where user "oracle" was unable to start or stop listeners: oracle$ srvctl stop listener PRCR-1065 : Failed to stop resource ora.LISTENER.lsnr CRS-0245:  User doesn't have enough privilege to perform the operation CRS-0245:  User doesn't have enough privilege to perform the operation PRCR-1065 : Failed to stop resource ora.LISTENER_IB.lsnr CRS-0245:  User doesn't have enough privilege to perform the operation CRS-0245:  User doesn't have enough privilege to perform the operation The system is currently "fixed":oracle$ srvctl start listeneroracle$ srvctl status listenerListener LISTENER is enabledListener LISTENER is running on node(s): etc9cn02,etc9cn01Listener LISTENER_IB is enabledListener LISTENER_IB is running on node(s): etc9cn02,etc9cn01oracle$ srvctl stop listeneroracle$ srvctl status listenerListener LISTENER is enabledListener LISTENER is not runningListener LISTENER_IB is enabledListener LISTENER_IB is not runningoracle$ srvctl start listenerHow it was "fixed":Before:# crsctl status resource ora.LISTENER.lsnr -p | grep ACL=ACL=owner:root:rwx,pgrp:root:r-x,other::r--# crsctl status resource ora.LISTENER_IB.lsnr -p | grep ACL=ACL=owner:root:rwx,pgrp:root:r-x,other::r--"Fix":# crsctl setperm resource ora.LISTENER.lsnr -o oracle# crsctl setperm resource ora.LISTENER.lsnr -g oinstall# crsctl setperm resource ora.LISTENER_IB.lsnr -g oinstall# crsctl setperm resource ora.LISTENER_IB.lsnr -o oracleAfter:# crsctl status resource ora.LISTENER.lsnr -p | grep ACL=ACL=owner:oracle:rwx,pgrp:oinstall:r-x,other::r--# crsctl status resource ora.LISTENER_IB.lsnr -p | grep ACL=ACL=owner:oracle:rwx,pgrp:oinstall:r-x,other::r--I may never know how the system got into this state.

  Read the article

• Ubuntu Server 11.10 boot, white terminal with garbled black text

  - by SpeedCrazy

  I just installed Ubuntu server 11.10 and the install went fine. This system is running on an Intel Pentium II board with onboard graphics. However when I try to boot into Ubuntu I get a white terminal with garbled black text. I have tried various grub 'fixes' as googling the issue seemed to suggest it was a res or grub related issue. I cannot ssh in so the issue does affect Linux as well. I have had no luck with anything thus far and am at my wits end. This was my first Ubuntu excursion as my friend told me it was better for servers than CentOS because it was easier... Not so much.... Does anyone have any ideas as to what the issue could be? When answering bear in mind I am an Ubuntu noob and Linux novice. As of 1/26/12 I have tried to add the console=ttyl line to the /etc/default/grub and run update-grub. This results in the line in the boot parameters that normally reads: linux /vmlunz-3.0.0-12-generic-pae root=/dev/mapper/dev-root rovt.handoff=7 now reads: linux /vmlunz-3.0.0-12-generic-pae root=/dev/mapper/dev-root ro console=ttyl vt.handoff=7 This does not work. Is there anyway to have console=ttyl inserted on a line by itself? I am at my wits ends, Thanks for all your help, Speed

  Read the article

• Slow USB 3.0 speeds

  - by Cygnus X

  Long time forum forager, first time poster. I bought a Toshiba 500 GB usb 3.0 hard drive last week and instantly ran home to see how fast I could push it. On my desktop (that I built) I was able to get 200 MB/sec. On my laptop (MSI FX something or other), which I dual boot Windows 7/Ubuntu 11.10, I was able to get about 120 MB/sec on Windows, but on Ubuntu, i get about 25 MB/sec. lsusb shows: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 0bda:0139 Realtek Semiconductor Corp. Bus 002 Device 003: ID 1532:0015 Razer USA, Ltd Bus 004 Device 002: ID 0480:a007 Toshiba America Info. Systems, Inc. lspci -vvv shows that the USB 3.0 host controller is using the kernel driver in use is xhci_hcd. dmesg |grep usb shows: [ 1815.455368] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd [ 1815.475459] scsi7 : usb-storage 4-1:1.0 The built in disk utility says its connected via usb at 705 MB/s, but that's not what it reports when I transfer files over to it. Not really sure what to do at this point. Any help would be very nice, thank you.

  Read the article

• Browser automatically refreshes and Home folder window opens

  - by Vikash

  I am facing a very strange problem. Out of the blue, my browser starts refreshing itself infinitely. My first guess was firefox is messing up. I installed chrome. But, it happens in chrome as well. Other than that, sometimes my home folder automatically opens and keep opening itself infinitely. My next guess was Mouse is faulty. Replace the mouse - but same things. This happens even if I remove my keyboard. What can be the reason? This started happening after I installed Ubuntu 10.10 few days back. Earlier on windows, everything was working fine. So, I am a bit skeptical to assume that this is a hardware fault. How to fix this problem? UPDATE: xev gives this kind of result: KeyPress event, serial 36, synthetic NO, window 0x4200001, root 0xb8, subw 0x0, time 29897358, (237,791), root:(1252,842), state 0x10, keycode 65 (keysym 0x20, space), same_screen YES, XLookupString gives 1 bytes: (20) " " XmbLookupString gives 1 bytes: (20) " " XFilterEvent returns: False KeyRelease event, serial 36, synthetic NO, window 0x4200001, root 0xb8, subw 0x0, time 29897603, (237,791), root:(1252,842), state 0x10, keycode 65 (keysym 0x20, space), same_screen YES, XLookupString gives 1 bytes: (20) " " XFilterEvent returns: False

  Read the article

• Cannot establish ssh connection to computer on local network

  - by ovangle

  I've just (re)installed ubuntu 11.10 on my main pc, and the connection times out every time I try to ssh connect to my laptop (over the local network) to retrieve the files I backed up there. The connection times out every time I try to connect. I can establish a connection in the other direction without issue. Here's the verbose output I get when I try to connect: ovangle@ruby-EP43-DS3:~$ ssh -v [email protected] OpenSSH_5.8p1 Debian-7ubuntu1, OpenSSL 1.0.0e 6 Sep 2011 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 10.1.1.4 [10.1.1.4] port 22. debug1: connect to address 10.1.1.4 port 22: Connection timed out ssh: connect to host 10.1.1.4 port 22: Connection timed out ssh is installed on both machines, and I've tried deleting '~/.ssh/known_hosts' on both machines, still nada. I've changed the sshd logging on the laptop to VERBOSE and restarted the daemon (because I wasn't getting any relevant syslog entries otherwise), and this is the log for the most recent connection attempt. EDIT: posted wrong logs last time. They just showed that there was a connection received, they weren't actually the sshd logs (which were in auth.log as I recently discovered). Unfortunately, that log is filling up with extremely weird error messages and it gives me no information about the connection. Nov 8 16:02:18 ovangle-A6Rp pkexec: pam_unix(polkit-1:session): session opened for user root by (uid=1000) Nov 8 16:02:18 ovangle-A6Rp pkexec: pam_ck_connector(polkit-1:session): cannot determine display-device Nov 8 16:02:18 ovangle-A6Rp pkexec[6270]: ovangle: Executing command [USER=root] [TTY=unknown] [CWD=/home/ovangle] [COMMAND=/usr/sbin/gnome-power-backlight-helper --set-brightness 2] Nov 8 16:02:19 ovangle-A6Rp pkexec: pam_unix(polkit-1:session): session opened for user root by (uid=1000) Nov 8 16:02:19 ovangle-A6Rp pkexec: pam_ck_connector(polkit-1:session): cannot determine display-device Nov 8 16:02:19 ovangle-A6Rp pkexec[6273]: ovangle: Executing command [USER=root] [TTY=unknown] [CWD=/home/ovangle] [COMMAND=/usr/sbin/gnome-power-backlight-helper --set-brightness 7]

  Read the article

• Exadata???DiskGroup

  - by Liu Maclean(???)

  Exadata???Asm Diskgroup ???????: 1.??dcli -g /home/oracle/cell_group -l root cellcli -e list griddisk ????active?griddisk [root@dm01db01 ~]# dcli -g /home/oracle/cell_group -l root cellcli -e list griddisk dm01cel01: DATA_DM01_CD_00_dm01cel01 active dm01cel01: DATA_DM01_CD_01_dm01cel01 active dm01cel01: DATA_DM01_CD_02_dm01cel01 active dm01cel01: DATA_DM01_CD_03_dm01cel01 active dm01cel01: DATA_DM01_CD_04_dm01cel01 active dm01cel01: DATA_DM01_CD_05_dm01cel01 active dm01cel01: DATA_DM01_CD_06_dm01cel01 active dm01cel01: DATA_DM01_CD_07_dm01cel01 active dm01cel01: DATA_DM01_CD_08_dm01cel01 active dm01cel01: DATA_DM01_CD_09_dm01cel01 active dm01cel01: DATA_DM01_CD_10_dm01cel01 active dm01cel01: DATA_DM01_CD_11_dm01cel01 active dm01cel01: DBFS_DG_CD_02_dm01cel01 active dm01cel01: DBFS_DG_CD_03_dm01cel01 active dm01cel01: DBFS_DG_CD_04_dm01cel01 active dm01cel01: DBFS_DG_CD_05_dm01cel01 active dm01cel01: DBFS_DG_CD_06_dm01cel01 active dm01cel01: DBFS_DG_CD_07_dm01cel01 active dm01cel01: DBFS_DG_CD_08_dm01cel01 active dm01cel01: DBFS_DG_CD_09_dm01cel01 active dm01cel01: DBFS_DG_CD_10_dm01cel01 active dm01cel01: DBFS_DG_CD_11_dm01cel01 active dm01cel01: RECO_DM01_CD_00_dm01cel01 active dm01cel01: RECO_DM01_CD_01_dm01cel01 active dm01cel01: RECO_DM01_CD_02_dm01cel01 active dm01cel01: RECO_DM01_CD_03_dm01cel01 active dm01cel01: RECO_DM01_CD_04_dm01cel01 active dm01cel01: RECO_DM01_CD_05_dm01cel01 active dm01cel01: RECO_DM01_CD_06_dm01cel01 active dm01cel01: RECO_DM01_CD_07_dm01cel01 active dm01cel01: RECO_DM01_CD_08_dm01cel01 active dm01cel01: RECO_DM01_CD_09_dm01cel01 active dm01cel01: RECO_DM01_CD_10_dm01cel01 active dm01cel01: RECO_DM01_CD_11_dm01cel01 active dm01cel02: DATA_DM01_CD_00_dm01cel02 active dm01cel02: DATA_DM01_CD_01_dm01cel02 active dm01cel02: DATA_DM01_CD_02_dm01cel02 active dm01cel02: DATA_DM01_CD_03_dm01cel02 active dm01cel02: DATA_DM01_CD_04_dm01cel02 active dm01cel02: DATA_DM01_CD_05_dm01cel02 active dm01cel02: DATA_DM01_CD_06_dm01cel02 active dm01cel02: DATA_DM01_CD_07_dm01cel02 active dm01cel02: DATA_DM01_CD_08_dm01cel02 active dm01cel02: DATA_DM01_CD_09_dm01cel02 active dm01cel02: DATA_DM01_CD_10_dm01cel02 active dm01cel02: DATA_DM01_CD_11_dm01cel02 active dm01cel02: DBFS_DG_CD_02_dm01cel02 active dm01cel02: DBFS_DG_CD_03_dm01cel02 active dm01cel02: DBFS_DG_CD_04_dm01cel02 active dm01cel02: DBFS_DG_CD_05_dm01cel02 active dm01cel02: DBFS_DG_CD_06_dm01cel02 active dm01cel02: DBFS_DG_CD_07_dm01cel02 active dm01cel02: DBFS_DG_CD_08_dm01cel02 active dm01cel02: DBFS_DG_CD_09_dm01cel02 active dm01cel02: DBFS_DG_CD_10_dm01cel02 active dm01cel02: DBFS_DG_CD_11_dm01cel02 active dm01cel02: RECO_DM01_CD_00_dm01cel02 active dm01cel02: RECO_DM01_CD_01_dm01cel02 active dm01cel02: RECO_DM01_CD_02_dm01cel02 active dm01cel02: RECO_DM01_CD_03_dm01cel02 active dm01cel02: RECO_DM01_CD_04_dm01cel02 active dm01cel02: RECO_DM01_CD_05_dm01cel02 active dm01cel02: RECO_DM01_CD_06_dm01cel02 active dm01cel02: RECO_DM01_CD_07_dm01cel02 active dm01cel02: RECO_DM01_CD_08_dm01cel02 active dm01cel02: RECO_DM01_CD_09_dm01cel02 active dm01cel02: RECO_DM01_CD_10_dm01cel02 active dm01cel02: RECO_DM01_CD_11_dm01cel02 active dm01cel03: DATA_DM01_CD_00_dm01cel03 active dm01cel03: DATA_DM01_CD_01_dm01cel03 active dm01cel03: DATA_DM01_CD_02_dm01cel03 active dm01cel03: DATA_DM01_CD_03_dm01cel03 active dm01cel03: DATA_DM01_CD_04_dm01cel03 active dm01cel03: DATA_DM01_CD_05_dm01cel03 active dm01cel03: DATA_DM01_CD_06_dm01cel03 active dm01cel03: DATA_DM01_CD_07_dm01cel03 active dm01cel03: DATA_DM01_CD_08_dm01cel03 active dm01cel03: DATA_DM01_CD_09_dm01cel03 active dm01cel03: DATA_DM01_CD_10_dm01cel03 active dm01cel03: DATA_DM01_CD_11_dm01cel03 active dm01cel03: DBFS_DG_CD_02_dm01cel03 active dm01cel03: DBFS_DG_CD_03_dm01cel03 active dm01cel03: DBFS_DG_CD_04_dm01cel03 active dm01cel03: DBFS_DG_CD_05_dm01cel03 active dm01cel03: DBFS_DG_CD_06_dm01cel03 active dm01cel03: DBFS_DG_CD_07_dm01cel03 active dm01cel03: DBFS_DG_CD_08_dm01cel03 active dm01cel03: DBFS_DG_CD_09_dm01cel03 active dm01cel03: DBFS_DG_CD_10_dm01cel03 active dm01cel03: DBFS_DG_CD_11_dm01cel03 active dm01cel03: RECO_DM01_CD_00_dm01cel03 active dm01cel03: RECO_DM01_CD_01_dm01cel03 active dm01cel03: RECO_DM01_CD_02_dm01cel03 active dm01cel03: RECO_DM01_CD_03_dm01cel03 active dm01cel03: RECO_DM01_CD_04_dm01cel03 active dm01cel03: RECO_DM01_CD_05_dm01cel03 active dm01cel03: RECO_DM01_CD_06_dm01cel03 active dm01cel03: RECO_DM01_CD_07_dm01cel03 active dm01cel03: RECO_DM01_CD_08_dm01cel03 active dm01cel03: RECO_DM01_CD_09_dm01cel03 active dm01cel03: RECO_DM01_CD_10_dm01cel03 active dm01cel03: RECO_DM01_CD_11_dm01cel03 active ??????????griddisk, ?????’cellcli -e drop griddisk’ ?’cellcli -e create griddisk’????griddisk ,??????drop DBFS_DG???griddisk 2.??ASM???create disk group ?????CELL?IP,????????????? [root@dm01db02 ~]# cat /etc/oracle/cell/network-config/cellip.ora cell="192.168.64.131" cell="192.168.64.132" cell="192.168.64.133" SQL> create diskgroup DATA_MAC normal redundancy 2 DISK 3 'o/192.168.64.131/RECO_DM01_CD_*_dm01cel01' 4 ,'o/192.168.64.132/RECO_DM01_CD_*_dm01cel02' 5 ,'o/192.168.64.133/RECO_DM01_CD_*_dm01cel03' 6 attribute 7 'AU_SIZE'='4M', 8 'CELL.SMART_SCAN_CAPABLE'='TRUE', 9 'compatible.rdbms'='11.2.0.2', 10 'compatible.asm'='11.2.0.2' 11 / 3. MOUNT ???DISKGROUP ALTER DISKGROUP DATA_MAC mount ; 4.???crsctl start/stop resource ora.DATA_MAC.dg ?????

  Read the article

• XNA- Transforming children

  - by user1806687

  So, I have a Model stored in MyModel, that is made from three meshes. If you loop thrue MyModel.Meshes the first two are children of the third one. And was just wondering, if anyone could tell me where is the problem with my code. This method is called whenever I want to programmaticly change the position of a whole model: public void ChangePosition(Vector3 newPos) { Position = newPos; MyModel.Root.Transform = Matrix.CreateScale(VectorMathHelper.VectorMath(CurrentSize, DefaultSize, '/')) * Matrix.CreateFromAxisAngle(MyModel.Root.Transform.Up, MathHelper.ToRadians(Rotation.Y)) * Matrix.CreateFromAxisAngle(MyModel.Root.Transform.Right, MathHelper.ToRadians(Rotation.X)) * Matrix.CreateFromAxisAngle(MyModel.Root.Transform.Forward, MathHelper.ToRadians(Rotation.Z)) * Matrix.CreateTranslation(Position); Matrix[] transforms = new Matrix[MyModel.Bones.Count]; MyModel.CopyAbsoluteBoneTransformsTo(transforms); int count = transforms.Length - 1; foreach (ModelMesh mesh in MyModel.Meshes) { mesh.ParentBone.Transform = transforms[count]; count--; } } This is the draw method: foreach (ModelMesh mesh in MyModel.Meshes) { foreach (BasicEffect effect in mesh.Effects) { effect.View = camera.view; effect.Projection = camera.projection; effect.World = mesh.ParentBone.Transform; effect.EnableDefaultLighting(); } mesh.Draw(); } The thing is when I call ChangePosition() the first time everything works perfectlly, but as soon as I call it again and again. The first two meshes(children meshes) start to move away from the parent mesh. Another thing I wanted to ask, if I change the scale/rotation/position of a children mesh, and then do CopyAbsoluteBoneTransforms() will children meshes be positioned properlly(at the proper distance) or would achieving that require more math/methods? Thanks in advance

  Read the article

• Grub not loading after Windows 8 Install

  - by RazorXsr

  My system was configured to dual boot Ubuntu 12.04.1 LTS and Windows 7. Today I got my hands on the MSDN release of Windows 8 and I installed it over my Windows 7. Now the computer just boots to Windows 8 directly without loading the GRUB screen. So I followed the steps as suggested in: https://help.ubuntu.com/community/RecoveringUbuntuAfterInstallingWindows. Running this command: ls -l /dev/disk/by-label/ gives the following output: total 0 lrwxrwxrwx 1 root root 10 Sep 11 07:51 Entertainment -> ../../sda2 lrwxrwxrwx 1 root root 10 Sep 11 02:45 PENDRIVE -> ../../sdb1 Also fdisk -l command gives this as the output: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x1246aa23 Device Boot Start End Blocks Id System /dev/sda1 * 2048 319582199 159790076 7 HPFS/NTFS/exFAT /dev/sda2 319582208 602906623 141662208 7 HPFS/NTFS/exFAT /dev/sda3 602908672 625135615 11113472 83 Linux Disk /dev/sdb: 1939 MB, 1939865600 bytes 64 heads, 63 sectors/track, 939 cylinders, total 3788800 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdb1 * 2248 3788799 1893276 c W95 FAT32 (LBA) So I assume that I have to run this: sudo grub-install /dev/sda3 to get GRUB up and running. But I am getting this error: /usr/sbin/grub-probe: error: cannot find a device for /boot/grub (is /dev mounted?). Can anyone please guide me in the right direction? The current Ubuntu installation is far too customized to my needs to lose it to a boot manager issue! Any help is much appreciated!

  Read the article

• Using Subdomains for Newly Regional Company

  - by Taylord22

  The company I work for is expanding their business to new territories. I've got a lot of stabilization to do in the region/state where we're one of the most well known companies of our kind. Currently, we have 3 distinct product lines which are currently distinguished by 3 separate URLS. This is affecting the user flow of our site, so we'd like to clean it up before launching our products into the various regions. The business has decided to grow into 5 new states (one state consisting of one county only) — none of which will feature all 3 products. Our homebase state is the only one that will have all 3 products this year. My initial thought was to use subdomains to separate out the regions, that way we could use a canonical tag to stabilize the root domain (which would feature home state content, and support content for all regions), and remove us from potential duplicate content penalization. Our product content will be nearly identical across the regions for the first year. I second guessed myself by thinking that it was perhaps better to use a "[product].root/region" URL instead. And I'm currently stuck by wondering if it was not better to build out subdomains for products and regions...using one modifier or the other as a funnel/branding page into the other. For instance, user lands on "region.root.com" and sees exactly what products we offer in that region. Basically, a tailored landing page. Meanwhile the bulk of the product content would actually live under "product.root.com/region/page". My head is spinning. And while searching for similar questions I also bumped into reference of another tag meant to be used in some similar cases to mine. I feel like there's a lot of risks involved in this subdomain strategy, but I also can't help but see the benefits in the user flow.

  Read the article

• Problem installing wine on Ubuntu 12.10

  - by akhumaini

  I am having problem when installing wine on ubuntu 12.10 I tried to following some tutorial but none of them work. **root@ubuntu:~# add-apt-repository ppa:ubuntu-wine/ppa** **root@ubuntu:~# apt-get update** **root@ubuntu:~# apt-get install wine1.5** Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: wine1.5 : Depends: wine1.5-i386 (= 1.5.16-0ubuntu1) but it is not installable Recommends: ttf-droid Recommends: ttf-mscorefonts-installer but it is not going to be installed Recommends: ttf-umefont but it is not going to be installed Recommends: ttf-unfonts-core but it is not going to be installed Recommends: winbind but it is not going to be installed Recommends: winetricks but it is not going to be installed E: Unable to correct problems, you have held broken packages. root@ubuntu:~# Anyone can help me how to solve th problem ?

  Read the article

• Clickonce intranet application trust

  - by Mark

  Hi, we have a VSTO outlook add-in we'd like to silently deploy to everyone via AD. I'm signing the App with a "Code signing" certificate (requested certmgr from AD). If I add this certificate to my Trusted Publishers, then I can silently install the signed app via the VSTOInstaller.exe (with the /S switch). We don't want to have to install my certificate as a trusted publisher on everyone's machine - we'd like to be able to say that any code signed by a certificate issued within our AD is trusted. Is there some way to do this?

  Read the article

• Spring-Security with X509?

  - by jschoen

  I am new to spring-security in general and am a bit confused. The project I am trying to integrate this with uses X509 certificates to identify users for signing in to the application. There are no usernames or passwords. We validate the certificates are good, and that they have been given access to our app. The question is how do I integrate spring in to this to get their roles using the X509 certificates? I have seen this: <http> ... <x509 subject-principal-regex="CN=(.*?)," user-service-ref="userService"/> ... </http> But I don't understand how this works. Will it still require something for a password? Or is the subject all it needs?

  Read the article

• JKS, CER, SignCode issue

  - by Serge

  Currently, I've got an intresting problem about signing an EXE file using the SignCode tool from Microsoft and a certificate (from GlobalSign)... So, we've bought a new certificate as the current one will expire in short time. The original format is JKS. I exported this certificate from .JKS to .CER so I can install on local machine in the Root Trusted Certificates section. I've installed it and if I open the certmgr.msc I can see it, but if I open the Control Panel - Internet Options - Content - Certificates - Root Trusted Certificates etc then I can't see it... I thought it should be here as well. When I run the signcode.exe tool I get the "unable to open a csp provider with the correct private key" error message. Note! The signcode.exe command is correct, because it works if I test with the old certificate. Please advise. Thank you in advance! Serge

  Read the article

• Gson Deserialize to Java Tree

  - by MountainX

  I need to deserialize some JSON to a Java tree structure that contains TreeNodes and NodeData. TreeNodes are thin wrappers around NodeData. I'll provide the JSON and the classes below. I have looked at the usual Gson help sources, including here, but I can't seem to come up with the solution. Serialization works fine with Gson. The JSON below was produced by Gson. But deserialization is the problem I need help with. Can someone show me how to write the deserializer (or suggest an alternative approach using Gson best practices)? Here is my JSON. The "data" element corresponds to class NodeData, and the "subList" JSON element corresponds to Java class TreeNode. { "data": { "version": "032", "name": "root", "path": "/", "id": "1", "parentId": "0", "toolTipText": "rootNode" }, "subList": [ { "data": { "version": "032", "name": "level1", "labelText": "Some Label Text at Level1", "path": "/root", "id": "2", "parentId": "1", "toolTipText": "a tool tip for level1" }, "subList": [ { "data": { "version": "032", "name": "level1_1", "labelText": "Label level1_1", "path": "/root/level1", "id": "3", "parentId": "2", "toolTipText": "ToolTipText for level1_1" } }, { "data": { "version": "032", "name": "level1_2", "labelText": "Label level1_2", "path": "/root/level1", "id": "4", "parentId": "2", "toolTipText": "ToolTipText for level1_2" } } ] }, { "data": { "version": "032", "name": "level2", "path": "/root", "id": "5", "parentId": "1", "toolTipText": "ToolTipText for level2" }, "subList": [ { "data": { "version": "032", "name": "level2_1", "labelText": "Label level2_1", "path": "/root/level2", "id": "6", "parentId": "5", "toolTipText": "ToolTipText for level2_1" }, "subList": [ { "data": { "version": "032", "name": "level2_1_1", "labelText": "Label level2_1_1", "path": "/root/level2/level2_1", "id": "7", "parentId": "6", "toolTipText": "ToolTipText for level2_1_1" } } ] } ] } ] } Here are the Java classes: public class Tree { private TreeNode rootElement; private HashMap<String, TreeNode> indexById; private HashMap<String, TreeNode> indexByKey; private long nextAvailableID = 0; public Tree() { indexById = new HashMap<String, TreeNode>(); indexByKey = new HashMap<String, TreeNode>(); } public long getNextAvailableID() { return this.nextAvailableID; } ... [snip] ... } public class TreeNode { private Tree tree; private NodeData data; public List<TreeNode> subList; private HashMap<String, TreeNode> indexById; private HashMap<String, TreeNode> indexByKey; //this default ctor is used only for Gson deserialization public TreeNode() { this.tree = new Tree(); indexById = tree.getIdIndex(); indexByKey = tree.getKeyIndex(); this.makeRoot(); tree.setRootElement(this); } //makes this node the root node. Calling this obviously has side effects. public NodeData makeRoot() { NodeData rootProp = new NodeData(TreeFactory.version, "example", "rootNode"); String nextAvailableID = getNextAvailableID(); if (!nextAvailableID.equals("1")) { throw new IllegalStateException(); } rootProp.setId(nextAvailableID); rootProp.setParentId("0"); rootProp.setKeyPathOnly("/"); rootProp.setSchema(tree); this.data = rootProp; rootProp.setNode(this); indexById.put(rootProp.getId(), this); indexByKey.put(rootProp.getKeyFullName(), this); return rootProp; } ... [snip] ... } public class NodeData { protected static Tree tree; private LinkedHashMap<String, String> keyValMap; protected String version; protected String name; protected String labelText; protected String path; protected String id; protected String parentId; protected TreeNode node; protected String toolTipText;//tool tip or help string protected String imagePath;//for things like images; not persisted to properties protected static final String delimiter = "/"; //this default ctor is used only for Gson deserialization public NodeData() { this("NOT_SET", "NOT_SET", "NOT_SET"); } ... [snip] ... } Side note: The tree data structure is a bit strange, as it includes indexes. Obviously, this isn't a typical search tree. In fact, the tree is used mainly to create a hierarchical path element (String) in each NodeData element. (Example: "path": "/root/level2/level2_1".) The indexes are actually used for NodeData retrieval.

  Read the article

• How to get predecessor and successors from an adjacency matrix

  - by NickTFried

  Hi I am am trying to complete an assignment, where it is ok to consult the online community. I have to create a graph class that ultimately can do Breadth First Search and Depth First Search. I have been able to implement those algorithms successfully however another requirement is to be able to get the successors and predecessors and detect if two vertices are either predecessors or successors for each other. I'm having trouble thinking of a way to do this. I will post my code below, if anyone has any suggestions it would be greatly appreciated. import java.util.ArrayList; import java.util.Iterator; import java.util.LinkedList; import java.util.Queue; import java.util.Stack; public class Graph<T> { public Vertex<T> root; public ArrayList<Vertex<T>> vertices=new ArrayList<Vertex<T>>(); public int[][] adjMatrix; int size; private ArrayList<Vertex<T>> dfsArrList; private ArrayList<Vertex<T>> bfsArrList; public void setRootVertex(Vertex<T> n) { this.root=n; } public Vertex<T> getRootVertex() { return this.root; } public void addVertex(Vertex<T> n) { vertices.add(n); } public void removeVertex(int loc){ vertices.remove(loc); } public void addEdge(Vertex<T> start,Vertex<T> end) { if(adjMatrix==null) { size=vertices.size(); adjMatrix=new int[size][size]; } int startIndex=vertices.indexOf(start); int endIndex=vertices.indexOf(end); adjMatrix[startIndex][endIndex]=1; adjMatrix[endIndex][startIndex]=1; } public void removeEdge(Vertex<T> v1, Vertex<T> v2){ int startIndex=vertices.indexOf(v1); int endIndex=vertices.indexOf(v2); adjMatrix[startIndex][endIndex]=1; adjMatrix[endIndex][startIndex]=1; } public int countVertices(){ int ver = vertices.size(); return ver; } /* public boolean isPredecessor( Vertex<T> a, Vertex<T> b){ for() return true; }*/ /* public boolean isSuccessor( Vertex<T> a, Vertex<T> b){ for() return true; }*/ public void getSuccessors(Vertex<T> v1){ } public void getPredessors(Vertex<T> v1){ } private Vertex<T> getUnvisitedChildNode(Vertex<T> n) { int index=vertices.indexOf(n); int j=0; while(j<size) { if(adjMatrix[index][j]==1 && vertices.get(j).visited==false) { return vertices.get(j); } j++; } return null; } public Iterator<Vertex<T>> bfs() { Queue<Vertex<T>> q=new LinkedList<Vertex<T>>(); q.add(this.root); printVertex(this.root); root.visited=true; while(!q.isEmpty()) { Vertex<T> n=q.remove(); Vertex<T> child=null; while((child=getUnvisitedChildNode(n))!=null) { child.visited=true; bfsArrList.add(child); q.add(child); } } clearVertices(); return bfsArrList.iterator(); } public Iterator<Vertex<T>> dfs() { Stack<Vertex<T>> s=new Stack<Vertex<T>>(); s.push(this.root); root.visited=true; printVertex(root); while(!s.isEmpty()) { Vertex<T> n=s.peek(); Vertex<T> child=getUnvisitedChildNode(n); if(child!=null) { child.visited=true; dfsArrList.add(child); s.push(child); } else { s.pop(); } } clearVertices(); return dfsArrList.iterator(); } private void clearVertices() { int i=0; while(i<size) { Vertex<T> n=vertices.get(i); n.visited=false; i++; } } private void printVertex(Vertex<T> n) { System.out.print(n.label+" "); } }

  Read the article

• How to prevent popups when loading a keystore

  - by Newtopian

  Hi as corollary to this question I wanted to ask if you know how to prevent the poping of dialogue either to ask for password or to ask to insert a certificate. We are currently building a system where we have to use the windows keystore to get certificates that are stored on USB token containing both reader and certificate. Unlike the original question we do not experience problems when loading the keystore but when we are accessing it. If there is only a single certificate in the keystore no problem, we get the appropriate password popup at the appropriate time and that's it. However if a second USB key gets inserted in the system and later removed the entry remains in the keystore and from then-on every time we try to access information in the keystore we get a popup to insert the key. This occurs for every certificates in the store for which the key is not currently connected to the computer. The system we are interfacing with that requires these certificates necessitates that we perform multiple cryptographic operations and to have these popups to come up every times is rather annoying to say the least.

  Read the article

• SSL_accept hangs... sometimes ( C, linux, openssl )

  - by zbigh

  I'm currently working on an embedded linux system. There are two crucial client applications on the system that connect to an external server ( on another embedded system, all written in C ). The two apps use different certificates. The ssl connection works... At least usually, but from time to time an error occures: the server hangs on SSL_accept() when accepting connection from one of the applications - the one using older certificates. Restarting the server application does not help, nor does restarting the client - the only way is to reboot the server system, unless I create a symbilic link to the new certificates used by the other app - only then will restarting the server app work. Never does the error occur when both applications use the same, new certificate. Could this happen due to some strange openssl cache or something like that?

  Read the article

• Question about SSL Certificate.

  - by smwikipedia

  Hi experts, I am trying to make a SSL connection to a web site. Each time I enter the https:// address and press enter, the IE8 prompts me to select the Certificate (Client Certificate) to send to the server. I got 2 certificates to choose from. And they are stored in the IE8 - Internet Options - Content - Certificates - Personal. Since my server and client are the same machine, I want to use a single certificate for both server and client. And this certificate is a IIS generated self signed certificate. I do the following steps: 1- Generate a self-signed-cert in IIS; 2- Bind my site to https and choose the above self-signed-cert 3- Import the self-signed-cert at the IE8 - Internet Options - Content - Certificates - Personal. Then I use the https link to access my page, it is still prompts me to choose a certificate. But I cannot see my newly imported self-signed-cert. Why?

  Read the article

• bluetooth not working on Ubuntu 13.10

  - by iacopo

  I upgrated ubuntu from 13.4 to 13.10 and my bluetooth stopped working. When I open bluetooth I'm able to put it ON but the visibility doesn't show anything and didn't detect any device. when I: dmesg | grep Blue [ 2.046249] usb 3-1: Product: Bluetooth V2.0 Dongle [ 2.046252] usb 3-1: Manufacturer: Bluetooth v2.0 [ 15.255710] Bluetooth: Core ver 2.16 [ 15.255748] Bluetooth: HCI device and connection manager initialized [ 15.255759] Bluetooth: HCI socket layer initialized [ 15.255765] Bluetooth: L2CAP socket layer initialized [ 15.255776] Bluetooth: SCO socket layer initialized [ 20.110379] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.110386] Bluetooth: BNEP filters: protocol multicast [ 20.110400] Bluetooth: BNEP socket layer initialized [ 20.120635] Bluetooth: RFCOMM TTY layer initialized [ 20.120656] Bluetooth: RFCOMM socket layer initialized [ 20.120660] Bluetooth: RFCOMM ver 1.11 when I digit: lsusb Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 0bc2:2300 Seagate RSS LLC Expansion Portable Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 002: ID 0e6a:6001 Megawin Technology Co., Ltd GEMBIRD Flexible keyboard KB-109F-B-DE Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 002: ID 13ee:0001 MosArt Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub when I: hciconfig -a hci0: Type: BR/EDR Bus: USB BD Address: 00:1B:10:00:2A:EC ACL MTU: 1017:8 SCO MTU: 64:0 DOWN RX bytes:457 acl:0 sco:0 events:16 errors:0 TX bytes:68 acl:0 sco:0 commands:16 errors:0 Features: 0xff 0xff 0x8d 0xfe 0x9b 0xf9 0x00 0x80 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: Link mode: SLAVE ACCEPT when I digit: rfkill list 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: no 1: hci0: Bluetooth Soft blocked: no Hard blocked: no when I digit: sudo gedit /etc/bluetooth/main.conf [General] # List of plugins that should not be loaded on bluetoothd startup #DisablePlugins = network,input # Default adaper name # %h - substituted for hostname # %d - substituted for adapter id Name = %h-%d # Default device class. Only the major and minor device class bits are # considered. Class = 0x000100 # How long to stay in discoverable mode before going back to non-discoverable # The value is in seconds. Default is 180, i.e. 3 minutes. # 0 = disable timer, i.e. stay discoverable forever DiscoverableTimeout = 0 # How long to stay in pairable mode before going back to non-discoverable # The value is in seconds. Default is 0. # 0 = disable timer, i.e. stay pairable forever PairableTimeout = 0 # Use some other page timeout than the controller default one # which is 16384 (10 seconds). PageTimeout = 8192 # Automatic connection for bonded devices driven by platform/user events. # If a platform plugin uses this mechanism, automatic connections will be # enabled during the interval defined below. Initially, this feature # intends to be used to establish connections to ATT channels. AutoConnectTimeout = 60 # What value should be assumed for the adapter Powered property when # SetProperty(Powered, ...) hasn't been called yet. Defaults to true InitiallyPowered = true # Remember the previously stored Powered state when initializing adapters RememberPowered = false # Use vendor id source (assigner), vendor, product and version information for # DID profile support. The values are separated by ":" and assigner, VID, PID # and version. # Possible vendor id source values: bluetooth, usb (defaults to usb) #DeviceID = bluetooth:1234:5678:abcd # Do reverse service discovery for previously unknown devices that connect to # us. This option is really only needed for qualification since the BITE tester # doesn't like us doing reverse SDP for some test cases (though there could in # theory be other useful purposes for this too). Defaults to true. ReverseServiceDiscovery = true # Enable name resolving after inquiry. Set it to 'false' if you don't need # remote devices name and want shorter discovery cycle. Defaults to 'true'. NameResolving = true # Enable runtime persistency of debug link keys. Default is false which # makes debug link keys valid only for the duration of the connection # that they were created for. DebugKeys = false # Enable the GATT functionality. Default is false EnableGatt = false when I digit: dmesg | grep Bluetooth [ 2.013041] usb 3-1: Product: Bluetooth V2.0 Dongle [ 2.013049] usb 3-1: Manufacturer: Bluetooth v2.0 [ 13.798293] Bluetooth: Core ver 2.16 [ 13.798338] Bluetooth: HCI device and connection manager initialized [ 13.798352] Bluetooth: HCI socket layer initialized [ 13.798357] Bluetooth: L2CAP socket layer initialized [ 13.798368] Bluetooth: SCO socket layer initialized [ 20.184162] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.184173] Bluetooth: BNEP filters: protocol multicast [ 20.184197] Bluetooth: BNEP socket layer initialized [ 20.238947] Bluetooth: RFCOMM TTY layer initialized [ 20.238983] Bluetooth: RFCOMM socket layer initialized [ 20.239018] Bluetooth: RFCOMM ver 1.11 When I digit: uname -a Linux casa-desktop 3.11.0-13-generic #20-Ubuntu SMP Wed Oct 23 07:38:26 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux When I digit: lsmod Module Size Used by parport_pc 32701 0 rfcomm 69070 4 bnep 19564 2 ppdev 17671 0 ip6t_REJECT 12910 1 xt_hl 12521 6 ip6t_rt 13507 3 nf_conntrack_ipv6 18938 9 nf_defrag_ipv6 34616 1 nf_conntrack_ipv6 ipt_REJECT 12541 1 xt_LOG 17718 8 xt_limit 12711 11 xt_tcpudp 12884 32 xt_addrtype 12635 4 nf_conntrack_ipv4 15012 9 nf_defrag_ipv4 12729 1 nf_conntrack_ipv4 xt_conntrack 12760 18 ip6table_filter 12815 1 ip6_tables 27025 1 ip6table_filter nf_conntrack_netbios_ns 12665 0 nf_conntrack_broadcast 12589 1 nf_conntrack_netbios_ns nf_nat_ftp 12741 0 nf_nat 26653 1 nf_nat_ftp kvm_amd 59958 0 nf_conntrack_ftp 18608 1 nf_nat_ftp kvm 431315 1 kvm_amd nf_conntrack 91736 8 nf_nat_ftp,nf_conntrack_netbios_ns,nf_nat,xt_conntrack,nf_conntrack_broadcast,nf_conntrack_ftp,nf_conntrack_ipv4,nf_conntrack_ipv6 iptable_filter 12810 1 crct10dif_pclmul 14289 0 crc32_pclmul 13113 0 ip_tables 27239 1 iptable_filter snd_hda_codec_realtek 55704 1 ghash_clmulni_intel 13259 0 aesni_intel 55624 0 aes_x86_64 17131 1 aesni_intel snd_hda_codec_hdmi 41117 1 x_tables 34059 13 ip6table_filter,xt_hl,ip_tables,xt_tcpudp,xt_limit,xt_conntrack,xt_LOG,iptable_filter,ip6t_rt,ipt_REJECT,ip6_tables,xt_addrtype,ip6t_REJECT lrw 13257 1 aesni_intel snd_hda_intel 48171 5 gf128mul 14951 1 lrw glue_helper 13990 1 aesni_intel ablk_helper 13597 1 aesni_intel joydev 17377 0 cryptd 20329 3 ghash_clmulni_intel,aesni_intel,ablk_helper snd_hda_codec 188738 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel arc4 12608 2 snd_hwdep 13602 1 snd_hda_codec rt2800pci 18690 0 snd_pcm 102033 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel radeon 1402449 3 rt2800lib 79963 1 rt2800pci btusb 28267 0 rt2x00pci 13287 1 rt2800pci rt2x00mmio 13603 1 rt2800pci snd_page_alloc 18710 2 snd_pcm,snd_hda_intel rt2x00lib 55238 4 rt2x00pci,rt2800lib,rt2800pci,rt2x00mmio snd_seq_midi 13324 0 mac80211 596969 3 rt2x00lib,rt2x00pci,rt2800lib snd_seq_midi_event 14899 1 snd_seq_midi ttm 83995 1 radeon snd_rawmidi 30095 1 snd_seq_midi cfg80211 479757 2 mac80211,rt2x00lib drm_kms_helper 52651 1 radeon snd_seq 61560 2 snd_seq_midi_event,snd_seq_midi bluetooth 371880 12 bnep,btusb,rfcomm microcode 23518 0 eeprom_93cx6 13344 1 rt2800pci snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi crc_ccitt 12707 1 rt2800lib snd_timer 29433 2 snd_pcm,snd_seq snd 69141 21 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi psmouse 97626 0 drm 296739 5 ttm,drm_kms_helper,radeon k10temp 13126 0 soundcore 12680 1 snd serio_raw 13413 0 i2c_algo_bit 13413 1 radeon i2c_piix4 22106 0 video 19318 0 mac_hid 13205 0 lp 17759 0 parport 42299 3 lp,ppdev,parport_pc hid_generic 12548 0 usbhid 53014 0 hid 105818 2 hid_generic,usbhid pata_acpi 13038 0 usb_storage 62062 1 r8169 67341 0 sdhci_pci 18985 0 sdhci 42630 1 sdhci_pci mii 13934 1 r8169 pata_atiixp 13242 0 ohci_pci 13561 0 ahci 25819 2 libahci 31898 1 ahci Someone can help me?

  Read the article

• External usb 3.0 hard drive is not recognised when plugged into usb 3 port (ubuntu natty 64 bit).

  - by kimangroo

  I have an Iomega Prestige Portable External Hard Drive 1TB USB 3.0. It works fine on windows 7 as a usb 3.0 drive. It isn't detected on ubuntu natty 64bit, 2.6.38-8-generic. fdisk -l cannot see it at all: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x1bed746b Device Boot Start End Blocks Id System /dev/sda1 1 1689 13560832 27 Unknown /dev/sda2 * 1689 1702 102400 7 HPFS/NTFS /dev/sda3 1702 19978 146805760 7 HPFS/NTFS /dev/sda4 19978 60802 327914497 5 Extended /dev/sda5 25555 60802 283120640 7 HPFS/NTFS /dev/sda6 19978 23909 31571968 83 Linux /dev/sda7 23909 25555 13218816 82 Linux swap / Solaris Partition table entries are not in disk order lsusb can see it: Bus 003 Device 003: ID 059b:0070 Iomega Corp. Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 004: ID 05fe:0011 Chic Technology Corp. Browser Mouse Bus 002 Device 003: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 005: ID 0489:e00f Foxconn / Hon Hai Bus 001 Device 004: ID 0c45:64b5 Microdia Bus 001 Device 003: ID 08ff:168f AuthenTec, Inc. Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub And dmesg | grep -i xhci (I may have unplugged the drive and plugged it back in again after booting): [ 1.659060] pci 0000:04:00.0: xHCI HW did not halt within 2000 usec status = 0x0 [ 11.484971] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 11.484997] xhci_hcd 0000:04:00.0: setting latency timer to 64 [ 11.485002] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 11.485064] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3 [ 11.636149] xhci_hcd 0000:04:00.0: irq 18, io mem 0xc5400000 [ 11.636241] xhci_hcd 0000:04:00.0: irq 43 for MSI/MSI-X [ 11.636246] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X [ 11.636251] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X [ 11.636256] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X [ 11.636261] xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X [ 11.639654] xHCI xhci_add_endpoint called for root hub [ 11.639655] xHCI xhci_check_bandwidth called for root hub [ 11.956366] usb 3-1: new SuperSpeed USB device using xhci_hcd and address 2 [ 12.001073] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 12.007059] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 12.012932] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 12.018922] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 12.049139] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 12.056754] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 12.131607] xhci_hcd 0000:04:00.0: WARN no SS endpoint bMaxBurst [ 12.179717] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 12.686876] xhci_hcd 0000:04:00.0: WARN: babble error on endpoint [ 12.687058] xhci_hcd 0000:04:00.0: WARN Set TR Deq Ptr cmd invalid because of stream ID configuration [ 12.687152] xhci_hcd 0000:04:00.0: ERROR Transfer event for disabled endpoint or incorrect stream ring [ 43.330737] usb 3-1: reset SuperSpeed USB device using xhci_hcd and address 2 [ 43.422579] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 43.422658] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88014669af00 [ 43.422665] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88014669af40 [ 43.422671] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88014669af80 [ 43.422677] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88014669afc0 [ 43.531159] xhci_hcd 0000:04:00.0: WARN no SS endpoint bMaxBurst [ 125.160248] xhci_hcd 0000:04:00.0: WARN no SS endpoint bMaxBurst [ 903.766466] usb 3-1: new SuperSpeed USB device using xhci_hcd and address 3 [ 903.807789] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 903.813530] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 903.819400] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 903.825104] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 903.855067] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 903.862314] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 903.862597] xhci_hcd 0000:04:00.0: WARN no SS endpoint bMaxBurst [ 903.913211] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 904.424416] xhci_hcd 0000:04:00.0: WARN: babble error on endpoint [ 904.424599] xhci_hcd 0000:04:00.0: WARN Set TR Deq Ptr cmd invalid because of stream ID configuration [ 904.424700] xhci_hcd 0000:04:00.0: ERROR Transfer event for disabled endpoint or incorrect stream ring [ 935.139021] usb 3-1: reset SuperSpeed USB device using xhci_hcd and address 3 [ 935.226075] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 935.226140] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880148186b00 [ 935.226148] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880148186b40 [ 935.226153] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880148186b80 [ 935.226159] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880148186bc0 [ 935.343339] xhci_hcd 0000:04:00.0: WARN no SS endpoint bMaxBurst I thought it might be that the firmware wasn't compatible with linux or something, but when booting a live image of partedmagic, (2.6.38.4-pmagic), the drive was detected fine, I could mount it and got usb 3.0 speeds (at least they double the speeds I got from plugging same drive in usb 2 ports). dmesg in partedmagic did say something about no SuperSpeed endpoint which was an error I saw in a previous dmesg of ubuntu: Jun 27 15:49:02 (none) user.info kernel: [ 2.978743] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 Jun 27 15:49:02 (none) user.debug kernel: [ 2.978771] xhci_hcd 0000:04:00.0: setting latency timer to 64 Jun 27 15:49:02 (none) user.info kernel: [ 2.978781] xhci_hcd 0000:04:00.0: xHCI Host Controller Jun 27 15:49:02 (none) user.info kernel: [ 2.978856] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3 Jun 27 15:49:02 (none) user.info kernel: [ 3.089458] xhci_hcd 0000:04:00.0: irq 18, io mem 0xc5400000 Jun 27 15:49:02 (none) user.debug kernel: [ 3.089541] xhci_hcd 0000:04:00.0: irq 42 for MSI/MSI-X Jun 27 15:49:02 (none) user.debug kernel: [ 3.089544] xhci_hcd 0000:04:00.0: irq 43 for MSI/MSI-X Jun 27 15:49:02 (none) user.debug kernel: [ 3.089546] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X Jun 27 15:49:02 (none) user.debug kernel: [ 3.089548] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X Jun 27 15:49:02 (none) user.debug kernel: [ 3.089550] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X Jun 27 15:49:02 (none) user.warn kernel: [ 3.092857] usb usb3: No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum values Jun 27 15:49:02 (none) user.info kernel: [ 3.092864] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 Jun 27 15:49:02 (none) user.info kernel: [ 3.092866] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 27 15:49:02 (none) user.info kernel: [ 3.092867] usb usb3: Product: xHCI Host Controller Jun 27 15:49:02 (none) user.info kernel: [ 3.092869] usb usb3: Manufacturer: Linux 2.6.38.4-pmagic xhci_hcd Jun 27 15:49:02 (none) user.info kernel: [ 3.092870] usb usb3: SerialNumber: 0000:04:00.0 Jun 27 15:49:02 (none) user.debug kernel: [ 3.092961] xHCI xhci_add_endpoint called for root hub Jun 27 15:49:02 (none) user.debug kernel: [ 3.092963] xHCI xhci_check_bandwidth called for root hub Well I have no idea what's going wrong, and I haven't had much luck from google and the forums so far. A number of unanswered threads with people with similar error messages and problems only. Hopefully someone here can help or point me in the right direction?!

  Read the article

• Newbie error with Windows Azure–403 not authorised

  - by simonsabin

  Azure uses certificates to manage secure access to the management side of things. I’ve started looking into azure for some SQLBits . So in doing so I needed to configure certificates to  connect. VS nicely will create a cert for you and copies a path for you to use to upload to azure. I went to the Azure portal ( https://windows.azure.com/Default.aspx ) found the certificate bit and added the certificate. However after doing this I couldn’t connect. After trying numerous fruitless things, including...(read more)

  Read the article

< Previous Page | 96 97 98 99 100 101 102 103 104 105 106 107  | Next Page >