Search Results

Search found 4896 results on 196 pages for 'vendor selection'.

Page 101/196 | < Previous Page | 97 98 99 100 101 102 103 104 105 106 107 108  | Next Page >

• Windows Cannot Boot - 0xc0000225

  - by B__

  I've had Windows 7 installed for months on my Thinkpad T60 laptop and today out of the blue when I tried to boot, it started the Windows loading screen and immediately I got this error: Status: 0xc0000225 Info: The boot selection failed because a required device is inaccessible. Through some research, I see people get this problem when a repartitioning goes wrong or there's a problem with their dual boot. I'm not dual booting my machine and I haven't messed with my partitions since I installed the OS. This error is truly out of the blue. I've run memory diagnostics from a Windows boot disc and hard drive diagnostics from my BIOS and neither found a problem. I don't have any backups to restore from so I'm hoping to find a fix for this. Anyone seen this kind of thing before? Thanks

  Read the article

• how to fix "BusyBox v1.17.1 (Ubuntu 1:1.17.1-10ubuntu1) built-in shell (ash) Enter 'help' for a list of built-in commands?"

  - by Joseph

  So I was using Ubuntu when suddenly the whole thing froze up and I had to reboot. And from that moment on, the system when it is starting up, prompts this little selection menu: GNU GRUB version 1.99~rc1-13ubuntu3 Ubuntu, with Linux 2.6.38-10-generic ubuntu, with Linux 2.6.38-10-generic (recovery mode) Previous Linux versions Memory test (memtest86+) Memory test (memtest86+, serial console 115200) I have chosen all of the available choices but all I get is another command line system that reads: BusyBox v1.17.1 (Ubuntu 1:1.17.1-10ubuntu1) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs): And honestly I can't do anything with it. Does anyone have any idea of what is going on and how I can get Ubuntu to work again?

  Read the article

• Proliant ML350 Won't Load Windows

  - by Mike

  I have a HP Proliant ML350 G4 running Windows 2003 Server Std Edition that will not load Windows on boot. It gave me a BSOD while running a recent Windows update and has not been able to boot since. The BSOD was a generic error, "Hardware Fault. Contact vendor." I am not getting any errors when the machine boots--it just hangs with a black screen when Windows starts to load. The machine will not boot into safe mode either--it gets stuck after beginning to load drivers. When trying to load the Windows recovery console I get the message that Windows cannot find any hard disks on the machine. This, despite having to load the driver for my storage controller. The HP Smart Start diagnostics finds no problems with my hard disks nor anything else. What should I try next? Mainly, I just want to be able to pull the data off my hard disks.

  Read the article

• Getting a list of patches in an HPSA patch policy

  - by asm

  I'm trying to get a list of patches contained in a Patch Policy in HPSA -- I can get what I need via the Twister web interface (under PatchPolicy.getPatches(), give it an ID, and it happily returns a list of patches contained.) -- I'm having a hard time getting this to work via the Pytwist interface, though... I haven't used the Pytwist interface for much besides some very basic Device manipulation, and Python is.. not my forte. I create the TwistServer object, then a PatchPolicy object from that (which I think is working..), but can't figure out how/where to call the getPatches() method from in Python-land. If there's a way to dig this out of the database itself, that would work, too, but I can't seem to find much in there along these lines besides the vendor-recommended patching stuff, and we use custom policies.

  Read the article

• Booting From VIA VT6421A Based PCI SATA Card

  - by Priyan R

  I bought a VIA VT6421A based SATA card for an 845 chipset based motherboard. The card is working i can access sata hdd from windows/linux. The problem is i can't directly boot from the sata card. My motherboard is award bios 6 based. I tried first boot as SCSI, its not worked. There is no Raid Bios screen appeared from the card. On searching i found , Add VT6421A bios to system bios as pci addon bios. I did it using cbrom6 , successfully added VT6421A bios to the existing bios. But now on booting instead of raid bios system bios showed Warning : something like cannot load add on rom for vendor id xxxx device id xxx . Whats wrong ? As the card is VT6421A based and i added VT6421A bios got from VIA website.

  Read the article

• What proportion of DBA skills are platform-independent?

  - by Arkaaito

  Problem: we've grown to the point where we need a real DBA. Real DBAs are hard to find. Possible solution: I know someone with extensive experience (currently working on MSSQL) who is looking for a new DBA job. He might be willing to consider working for a MySQL shop (I haven't asked). Snag: I don't know to what extent MSSQL DBA skills map to MySQL DBA skills. I'm a developer, so I know enough about MySQL to develop apps which use it (including the basic performance-tuning, index selection, etc.), do schema design, and perform simple utility tasks (backup with mysqldump, scripting, etc.). I don't know anything about MSSQL. Nor do I actually know much about the boundaries of the DBA role. Can anyone with more experience - perhaps as a DBA - weigh in on this? Are there enough similarities between MSSQL and MySQL that it's worth asking a MSSQL DBA if he'd be interested in applying for a MySQL position?

  Read the article

• Biztalk Server 2006 64bit problem

  - by WtFudgE

  Hi, I am trying to install a 64-bit biztalk server 2006. However when I start my installation it asks if I want to get my .cab file from the internet or install it manually etc. Because of internet security issues here at our work we can't get it from the internet directly. So I downloaded it manually: BtsRedistW2k3EN64.cab, to be exact. However when I try to install this it complains about: This installation package is not supported by this processor type. Contact your product vendor. I opened the cab file and found out that the file: SQLServer2005_ADOMD.msi was apparently the problem. So I thought I'd install the 64bit version of this msi then: SQLServer2005_ADOMD_x64.msi, however I get the same error. So atm I'm pretty stuck. Anyone have any ideas? Thanks a lot

  Read the article

• What is your best travel (portable) WiFi router?

  - by Sorin Sbarnea

  I'm looking for a small WiFi router that I could use to create my own wireless network when I travel. I'm also interested in a router that has very good signal/antenna and that is easy to take with you. Please do not recommend products just because you can find them on the net, I'm interested about personal experience. Also it's good to know if you can install open-source firmware on it. Selection criteria: size signal quality price Required: to support both 110V/220V power supply, best if embedded or retractable cord.

  Read the article

• I get Get-WmiObject : Generic Failure error on an XP Machine. What needs to be done to get rid of this?

  - by steeluser

  I am trying make an uninstall app which removes an application X on a regular basis. The starting point to access applications installed in a Windows machine is through retrieving them from a WMI Class called Win32_Product. But when I run the basic command like this, I get the below error. I have searched technet and SO, but either their workarounds did not work for me or were too technical in detail which did not make sense to me. Please help. SO Link ps$ Get-WmiObject -class win32_product IdentifyingNumber : {09959E11-AD5D-408E-96AF-E3346954D6B8} Name : Shared Add-in Extensibility Update for Microsoft .NET Framework 2.0 (KB908002) Vendor : Microsoft Version : 1.0.0 Caption : Shared Add-in Extensibility Update for Microsoft .NET Framework 2.0 (KB908002) Get-WmiObject : Generic failure At line:1 char:14 + Get-WmiObject <<<< -class win32_product + CategoryInfo : InvalidOperation: (:) [Get-WmiObject], ManagementException + FullyQualifiedErrorId : GetWMIManagementException,Microsoft.PowerShell.Commands.GetWmiObjectCommand

  Read the article

• HAproxy - Redirect issue - Uri Variables ?

  - by Justin

  I'm using haproxy 1.5dev3 and I was wondering if there is any possible way to grab uri variables from a request to reappend the query on the end of a redirect url? What I'm trying to do is redirect from: http://www.domain.com/page/example.htm?id=1234567 to: http://www.domain.com/frame/newpage.cfm?id=1234567 redirect prefix doesn't work properly as it tries to append /page/example.htm to the end of the redirect url. Can I do some sort of rewrite to accomplish this? It would be awesome if you could use uri and queries as variables for redirection/pool selection like on F5. Please help...Thanks!

  Read the article

• Synchronize pasteboard between remote tmux session and local Mac OS pasteboard

  - by bhargav

  Setup: I use iTerm2 on MacOS to connect to a remote server. The remote server runs tmux, in which I open files and edit in vim sessions. Problem: I can't copy/paste between the remote tmux session and the local iTerm client. I can use iTerm 2's alt/option + mouse selection to select text, but this copies over multiple vim panes/tmux panes - bad. Is there any elegant solution to make selections in tmux panes synchronize between the remote pasteboard and the local (MacOS pasteboard)? I've seen reattach-to-user-namespace, but I'm pretty certain it doesn't do what I want.

  Read the article

• Setting up dovecot on OpenBSD

  - by Jonas Byström

  I'm a *nix n00b that just installed dovecot (the selection with no ldap, mysql or pgsql) on OpenBSD 4.0 and I want to set it up for imap use, but I'm having a hard time finding documentation that I can understand. It currently running on port 143 (checked with telnet) but from there I need to do the following: I need some accounts, the once already on the system are fine if I can get those running (seemed to be some dovecot option somehow?), or just adding a few manually is ok too. Was there some setting for this in the default /etc/dovecot.conf? passdb bsdauth {} is uncommented by default... I need to create imap folders, or subfolders. How can I do that? Hopefully not, but anything else I need to do? I want to run without certification validation and no SSL/TLS, would this work by default (client-side settings)?

  Read the article

• Are there no downsides to NetApp SAN solutions other than price?

  - by flashkube

  We have pretty much decided on a NetApp solution for our first SAN. Given that, I've been tasked with finding as much reason not to go with NetApp as I can. We like to do this A) so we know what we're getting into and B) so we aren't clouded by the inevitable post vendor demo euphoria. I have scoured the internet for cons and can only find one: price. Have you had a nightmare experience with NetApp that you just want to get off your chest? Please, only people with NetApp experience. Thank you!

  Read the article

• BackupExec 12 to Bacula questions

  - by LVDave

  We have a 128 node compute cluster for environmental modeling, with a master/head node which we currently backup with a Windows2003 system running BackupExec 12 and a single HP LTO3 tape drive. We have recently ordered an Overland NEO200s 12 slot library, and are considering migrating off Windows to CentOS 5 for the backup server. The master/head node is RHEL5, with the compute nodes currently being migrated from a mix of RHEL3/4/5 to CentOS5. I'm fairly familiar with RH/Centos, but have no experience with Bacula. We've tentatively settled on Bacula as our cluster vendor recommended it. My questions are: 1) Does Bacula support an Overland NEO200s/LTO3 library? 2) Can Bacula catalog/restore tapes written by BE? and 3) I've head of Amanda, but am even more unfamiliar with it than Bacula. Any assistance would be appreciated Dave Frandin

  Read the article

• Second partition with Windows 7 unmountable

  - by Florian Pilz

  I'm using GRUB2 to dualboot Ubuntu and Windows 7. I installed Windows 7 some days ago and rewrote GRUB2 to cope with the dualboot. Everything went fine till yesterday - I could boot into both OS. Since this morning my laptop restarts every time I choose Windows 7 from the menu. Ubuntu is still working. As I tried to mount the partition with Windows 7 on Ubuntu it gave me return code 2, so this isn't working as well. I tried to reinstall GRUB2 to the MBR but it didn't help. I also tried to repair Windows 7 boot with it's install DVD, while trying so it showed me the following error: "Status: 0xc000000f Info: Boot selection failed because a required device is inaccessible." Tanks in advance

  Read the article

• Change Management Software

  - by Andrew

  I manage an 80,000 user CIS application written in Uniface. Every form in the application, and many of its processes, are represented by .frm files. We have hundreds of these files and 5 instances of the application. Instances include multiple production installations which must be kept sync'd. We do not get MD5 from our vendor for files that are released to us as patches. We have been using a spreadsheet to track changes, but this is far from ideal. Is there a commercial application that can be purchased that will allow us to track changes to the instances? Thank you all! EDIT: Patches are released as zip files with either FRM files in them or SQL files or a mix of both. SQL files will contain statements that need to be run in Oracle. Patches are also assigned unique patch numbers.

  Read the article

• scanning only works under "sudo" (Ubuntu)

  - by JoelFan

  When I try to scan, using simple-scan, the UI says Failed to scan -- Unable to connect to scanner. When I run it from the command line I get: joel@home:/usr/bin$ simple-scan -d ** (simple-scan:6554): DEBUG: Starting Simple Scan 2.32.0.1, PID=6554 ** (simple-scan:6554): DEBUG: Restoring window to 600x400 pixels ** (simple-scan:6554): DEBUG: sane_init () -> SANE_STATUS_GOOD ** (simple-scan:6554): DEBUG: SANE version 1.0.22 ** (simple-scan:6554): DEBUG: Requesting redetection of scan devices ** (simple-scan:6554): DEBUG: Processing request ** (simple-scan:6554): DEBUG: Requesting scan at 300 dpi from device '(null)' ** (simple-scan:6554): DEBUG: scanner_scan ("(null)", 300, SCAN_SINGLE) ** (simple-scan:6554): DEBUG: sane_get_devices () -> SANE_STATUS_GOOD ** (simple-scan:6554): DEBUG: Device: name="brother2:bus4;dev1" vendor="Brother" model="MFC-210C" type="USB scanner" ** (simple-scan:6554): DEBUG: Processing request ** (simple-scan:6554): DEBUG: sane_open ("brother2:bus4;dev1") -> SANE_STATUS_IO_ERROR ** (simple-scan:6554): WARNING **: Unable to get open device: Error during device I/O FYI, I have already done: joel@home:~$ sudo chmod a+rwx /dev/bus/usb joel@home:~$ sudo chmod a+rwx /dev/bus/usb/* If I run under sudo: joel@home:~$ sudo simple-scan it works. How can I get simple-scan to work without sudo?

  Read the article

• How can I change the amount of video memory with a Mobile Intel 4 Series Express Chipset?

  - by user45924

  I have the chipset in the title. The Intel control panel says the following: Intel® Graphics Media Accelerator Driver for Mobile Report Report Date: 8/11/2010 Report Time[hr:mm:ss]: 20:2:54 Driver Version: 8.15.10.2182 Operating System: Windows 7 (6.1.7600) Default Language: English (Canada) DirectX* Version: 10.0 Physical Memory: 3963 MB Minimum Graphics Memory: 128 MB Maximum Graphics Memory: 1759 MB Graphics Memory in Use: 17 MB Processor: Intel64 Family 6 Model 23 Stepping 10 Processor Speed: 1995 MHz Vendor ID: 8086 Device ID: 2A42 Device Revision: 07 Even while playing games, the Graphics Memory in Use only ever goes up to 26 MB. I've looked in the BIOS; there's nothing there. Is there any way I can force it to go higher? Thanks :)

  Read the article

• Does HP 8530w support Wifi 802.11n?

  - by FoxyBOA

  According to vendor site HP 8530w supports 802.11n draft mode. My Windows 7 tell me that network card is 5100 ABG and know nothing about N mode (guys from Intel forum mentioned, that 802.11N versions must ended with N letter, e.g. 5100 ABN). Not sure if it matter, but my laptop model id is #FU462EA. How could I check that my Wifi card compliant with 802.11n (I suspect that "draft N" could have two "special" meaning: doesn't work with 802.11n at all or requires special activation of the mode). Any hints are welcome.

  Read the article

• Are there any vendors making a Gigabit Fiber solution for laptops?

  - by romandas

  I'm trying to build a laptop system that can connect to just about any network you might come across in a large enterprise. I realize I can use a media converter to go from twisted pair to fiber but prefer to have a NIC instead of a converter. Is there a vendor out there that actually makes a gigabit ethernet fiber adapter for laptops? Edit: A year after I asked this question, apparently Allied Telesis came out with the AT-2872SX ExpressCard which has an SC connector for Gigabit Ethernet. See syneticon-dj's answer below.

  Read the article

• Windows 7 Explorer keyboard shortcut: set focus to files/folders/content area?

  - by Pup

  Is there a Windows 7 Explorer keyboard shortcut to set focus to files/folders/content area (depicted below)? This has bothered me for so long... I want to set my explorer window's focus to the files pane (shown below). What's the most efficient way to do that with a keyboard? Here's what I've been doing: - Tab / Shift+Tab to move focus through interactive window elements until it looks like a selection rectangle appears over one of the files in my window. - Alt+V, Alt+D to change appearance setting of a folder contents' icons. Doesn't always work, depending on what's selected at the time.

  Read the article

• Ideas for scaling out database architecture

  - by andrew

  We're looking to scale out our existing database architecture and need some advice on which way to go. We currently have 2 web servers behind a load balancer that both read & write to a single master database which replicates to a slave. Ideally, I'd like each of the webservers to point to their own master DB and have the data between the 2 synchronised but from what I've read, using any kind of master-master or ring-replication is discouraged. I'm looking for a general "what do other people do" kind of answer - database vendor isn't a concern at the moment but we'd like to stay with MySQL or convert to MSSQL. Any ideas would be gratefully received. Many thanks, Andrew

  Read the article

• Issues after upgrading the servers PHP version

  - by Harish Kurup

  I have created my project in Symfony 1.4.8 with Propel ORM. previously server had PHP version 5.2.* and i have upgraded it to 5.3.4, then the problem started giving some error in Propel. the errors were, PHP Deprecated: Directive 'magic_quotes_gpc' is deprecated in PHP 5.3 and greater in Unknown on line 0 PHP Fatal error: Class 'PDO' not found in /usr/local/lib/php/symfony/plugins/sfPropelPlugin/lib/vendor/propel/util/PropelPDO.php on line 42 PHP Warning: Module 'PDO' already loaded in Unknown on line 0 PHP Warning: Module 'pdo_sqlite' already loaded in Unknown on line 0 PHP Warning: Module 'SQLite' already loaded in Unknown on line 0 Is there any config error that has to be taken care of?? please help!

  Read the article

• Added and removed a custom service, but the keybinding is still stuck?

  - by Mathletics

  I created a custom service in Automator to open a new finder window from whatever app I'm in, and assigned it to CMD+E (I was trying to get the WIN+E effect from Windows.) I tried it for a few days, restarted the computer daily, but found it didn't work that well. So I removed the keybinding, then removed the service, deleted the Automator file, etc. So, now the custom service is gone, but CMD+E still goes to the finder from whatever app I'm in! I added a custom shortcut to BBEdit in an attempt to restore its CMD+E action (find with selection), but it STILL goes to the finder! I just want CMD+E to do what it normally does in each app. Any ideas?

  Read the article

• Windows 8 won't boot after Boot Repair

  - by Rudolph Gottesheim

  I've got a Sony Vaio laptop. Until yesterday I had Windows 7 and Ubuntu 12.04 installed. Today I upgraded to Windows 8, which killed my OS selection screen. So I booted to Ubuntu 12.10 from a USB stick and ran Boot Repair. This recovered the GRUB screen and let me boot into my Ubuntu 12.04 installation, but now I can' boot Windows 8. When I select the option that booted Windows 7 before, it looks like it wants to start Windows 7 (sic) again (black screen, with the text "Windows is loading" or something), but then reboots the machine after a few seconds. I'm sure Boot Repair can fix this, but I know far too little about the whole booting thing to know the right settings for it. Here's my boot repair report thing.

  Read the article

< Previous Page | 97 98 99 100 101 102 103 104 105 106 107 108  | Next Page >