assembly attributes - Page 102

Moving hidden files/folders with the command-line or batch-file

- by Synetech

Question Does anyone know of a way to move files and folders that have the hidden, system, or read-only attribute set from the command-line or a batch file? (No, stripping the attributes first is not an option since there is no practical way to know which attributes were set in order to re-set them after the move.) (Failed) Attempts Using the basic move command does not work with items with the hidden or system attribute set and for some reason, it does not have switches to specify attributes like the dir and del commands do. I tried using a utility I wrote that uses the shell’s file operation function, but that requires using start /w to prevent the batch file from running on ahead, and it complains about long-filename support for some reason. I tried using robocopy, but it first copies the files and then deletes the originals instead of simply moving the source (which results in a frustrating delay, even with the excessive output redirected to nul). (Surprisingly it seems that few people have ever needed to move hidden files from the command-line. All I could find was this one person who abandoned the attempt.)

Read the article

ASA 5505 VPN setup. VPN works but still unable to reach devices in the inside network.

- by chickenloop

I've setup a Remote Access VPN on my Cisco ASA 5505. I'm able to connect to my ASA via my phone or the Cisco client, but I'm unable to reach devices in my inside LAN when connected via VPN. The setup is the following: Inside Network : 10.0.0.0/24 VPN_POOL: 172.16.0.0/24 Outside Network: 192.168.1.0/24 ASA is not the perimeter router, there is another device on the 192.168.1.0/24 network which is connected to my cable provider. Obviously UDP port 500 and 4500 are forwarded to the ASA's outside interface. Everything works perfectly, besides the VPN stuff. Config: interface Vlan1 nameif inside security-level 100 ip address 10.0.0.254 255.255.255.0 interface Vlan2 description Outside Interface nameif outside security-level 0 address 192.168.1.254 255.255.255.0 object network VPNPOOL subnet 172.16.0.0 255.255.255.0 object network INSIDE_LAN subnet 10.0.0.0 255.255.255.0 Then the exempt NAT rule. nat (inside,outside) source static INSIDE_LAN INSIDE_LAN destination static VPNPOOL VPNPOOL I don't think that the problem is with the VPN config, as I can successfully establish the VPN connection, but just in case I post it here: group-policy ZSOCA_ASA internal group-policy ZSOCA_ASA attributes vpn-tunnel-protocol ikev1 split-tunnel-policy tunnelspecified split-tunnel-network-list value Split-Tunnel default-domain value default.domain.invalid tunnel-group ZSOCA_ASA type remote-access tunnel-group ZSOCA_ASA general-attributes address-pool VPNPOOL default-group-policy ZSOCA_ASA tunnel-group ZSOCA_ASA ipsec-attributes ikev1 pre-shared-key ***** Any ideas are welcome. Regards.

Read the article

CodeIgniter: Passing variables via URL - alternatives to using GET

- by John Durrant

I'm new to CodeIgniter and have just discovered the difficulties using the GET method of passing variables via the URL (e.g. domain.com/page.php?var1=1&var2=2). I gather that one approach is to pass the variables in the URI segments but haven't quite figured out how to do that yet as it seems to create the expectation of having a function in the controller named as the specific URI segment???? Anyway Instead of using GET I've decided to use POST by adapting a submit button (disguised as a link) with the variables in hidden input fields. I've created the following solution which seems to work fine, but am wondering whether I'm on the right track here or whether there is an easier way of passing variables via a link within CodeIgniter? I've created the following class in application/libraries/ <?php if ( ! defined('BASEPATH')) exit('No direct script access allowed'); class C_variables { function variables_via_link($action, $link_text, $style, $link_data) { $attributes = array('style' => 'margin:0; padding:0; display: inline;'); echo form_open($action, $attributes); $attributes = array('class' => $style, 'name' => 'link'); echo form_submit($attributes, $link_text); foreach ($link_data as $key => $value){ echo form_hidden($key, $value); } echo form_close(); } } ?> With the following CSS: /* SUBMIT BUTTON AS LINK adapted from thread: http://forums.digitalpoint.com/showthread.php?t=403667 Cross browser support (apparently). */ .submit_as_link { background: transparent; border-top: 0; border-right: 0; border-bottom: 1px solid #00F; border-left: 0; color: #00F; display: inline; margin: 0; padding: 0; cursor: hand /* Added to show hand when hovering */ } *:first-child+html .submit_as_link { /* hack needed for IE 7 */ border-bottom: 0; text-decoration: underline; } * html .submit_as_link { /* hack needed for IE 5/6 */ border-bottom: 0; text-decoration: underline; } Link then created using the following code in the VIEW: <?php $link = new C_variables; $link_data=array('var1' => 1, 'var2' => 2); $link ->variables_via_link('destination_page', 'here is a link!', 'submit_as_link', $link_data); ?> Thanks for your help...

Read the article

Nhibernate, mapping as (n)varchar max ?

- by Quandary

Question: In nHiberne, I map a string like this: [NHibernate.Mapping.Attributes.Property(Name = "MLST_Description", Type = "String", Length = 400)] which maps string to nvarchar(400) This one [NHibernate.Mapping.Attributes.Property(Name = "MLST_Description", Type = "String")] maps to nvarchar(255) But how can I map to nvarchar(max) ?

Read the article

How to use Android GradientDrawable

- by Janusz

I try to use the GradientDrawable to set a gradient to some backgrounds and buttons. Sadly the documentation is not very detailed. What are the main attributes to configure the gradient? I understand start and endcolor but some of the other attributes could need some explanation. At the moment I used images as the background for the buttons but a drawable defined in XML would be much nicer. I try to get a look like this (It is a very light gradient):

Read the article

Html.EditorFor not updating model on post

- by Dave

I have a complex type composed of two nullable DateTimes: public class Period { public DateTime? Start { get; set; } public DateTime? End { get; set; } public static implicit operator string(Period period) { /* converts from Period to string */ } public static implicit operator Period(string value) { /* and back again */ } } I want to display them together in a single textbox as a date range so I can provide a nice jQuery UI date range selector. To make that happen have the following custom editor template: <%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl<Period>" %> <% string name = ViewData.TemplateInfo.HtmlFieldPrefix; %> <%= Html.PeriodTextBox(name, Model.EarliestDate, Model.LatestDate) %> Where Html.PeriodTextBox is an extension method I've written that just concatenates the two dates sensibly, turns off autocomplete and generates a textbox, like so: public static MvcHelperString PeriodTextBox(this HtmlHelper helper, string name, DateTime? startDate, DateTime? endDate) { TagBuilder builder = new TagBuilder("input"); builder.GenerateId(name); builder.Attributes.Add("name", name); builder.Attributes.Add("type", "text"); builder.Attributes.Add("autocomplete", "off"); builder.Attributes.Add("value", ConcatDates(startDate, endDate)); return MvcHtmlString.Create(builder.ToString()); } That's working fine in that I can call <%= Html.EditorFor(m => m.ReportPeriod) %> and I get my textbox, then when the form is submitted the FormCollection passed to the post action will contain an entry named ReportPeriod with the correct value. [HttpPost] public ActionResult ReportByRange(FormCollection formValues) { Period reportPeriod = formValues["ReportPeriod"]; // creates a Period, with the expected values } The problem is if I replace the FormCollection with the model type I'm passing to the view then the ReportPeriod property never gets set. [HttpPost] public ActionResult ReportByRange(ReportViewModel viewModel) { Period reportPeriod = viewModel.ReportPeriod; // this is null } I expected MVC would try to set the string from the textbox to that property and it would automatically generate a Period (as in my FormCollection example), but it's not. How do I tell the textbox I've generated in the custom editor to poplate that property on the model?

Read the article

[GWT2] UiBinder work with ToggleButton

- by EnToutCas

I'm liking the new GWT2 UiBinder, however, it's not clear whether certain things are achievable using the declarative UI style. For instance, ToggleButton only takes the image instances at construction time (no setters for up/down images). As I understand, UiBinder works in a JavaBean-like reflective way, where the assignable attributes are mapped to corresponding setters. Is this style possible with widgets like ToggleButton, where certain attributes have to be specified at construction time? <g:ToggleButton ui:field="myBtn"></g:ToggleButton>

Read the article

Can Spring.Net function as PostSharp?

- by Alex K

A few months back I've discovered PostSharp, and for a time, it was good. But then legal came back with an answer saying that they don't like the licence of the old versions. Then the department told me that 2.0's price was unacceptably high (for the number of seats we need)... I was extremely disapponted, but not disheartened. Can't be the only such framework, I thought. I kept looking for a replacement, but most of it was either dead, ill maintained (especially in documentation department), for academic use, or all of the above (I'm looking at you Aspect.Net) Then I've discovered Spring.Net, and for a time, it was good. I've been reading the documentation and it went on to paint what seemed to be a supperior picture of an AOP nirvana. No longer was I locked to attributes to mark where I wanted code interception to take place, but it could be configured in XML and changes to it didn't require re-compile. Great. Then I looked at the samples and saw the following, in every single usage scenario: // Create AOP proxy using Spring.NET IoC container. IApplicationContext ctx = ContextRegistry.GetContext(); ICommand command = (ICommand)ctx["myServiceCommand"]; command.Execute(); if (command.IsUndoCapable) { command.UnExecute(); } Why must the first two lines of code exist? It ruins everything. This means I cannot simply provide a user with a set of aspects and attributes or XML configs that they can use by sticking appropriate attributes on the appropriate methods/classes/etc or editing the match pattern in XML. They have to modify their program logic to make this work! Is there a way to make Spring.Net behave as PostSharp in this case? (i.e. user only needs to add attributes/XML config, not edit content of any methods. Alternatively, is there a worthy and functioning alternative to PostSharp? I've seen a few question titled like this on SO, but none of them were actually looking to replace PostSharp, they only wanted to supplement its functionality. I need full replacement.

Read the article

how to prevent jsp tags from being reused after being classloaded

- by mkoryak

I have a problem where certain attributes in tag files stick around for the next time the tag is used. I think this is because the Tag class is being classloaded, and then that same instance is reused for every invocation. So attributes that i do not set in later invocations are not null like i would expect them to be, and contain stale values! I want this to not happen any more. Does anyone know what setting controls that in tomcat 6?

Read the article

Installing Monodevelop from the SVN on Ubuntu 10.04

- by celil

I wrote the following script to install the svn version of MonoDevelop #!/usr/bin/env bash PREFIX=/opt/local check_errs() { if [[ $? -ne 0 ]]; then echo "${1}" exit 1 fi } download() { if [ ! -d ${1} ] then svn co http://anonsvn.mono-project.com/source/trunk/${1} else (cd ${1}; svn update) fi } download mono download mcs download libgdiplus ( cd mono ./autogen.sh --prefix=$PREFIX make make install check_errs ) ( cd libgdiplus ./autogen.sh --prefix=$PREFIX make make install check_errs ) download monodevelop export PKG_CONFIG_PATH=${PREFIX}/lib/pkgconfig ( cd monodevelop ./configure --prefix=$PREFIX --select check_errs make check_errs ) Everything works fine until the last make step for the monodevelop pacakge, where the script exits with the error: ./MonoDevelop.WebReferences/MoonlightChannelBaseExtension.cs(320,82): error CS1061: Type `System.ServiceModel.Description.OperationContractGenerationContext' does not contain a definition for `SyncMethod' and no extension method `SyncMethod' of type `System.ServiceModel.Description.OperationContractGenerationContext' could be found (are you missing a using directive or an assembly reference?) ./MonoDevelop.WebReferences/MoonlightChannelBaseExtension.cs(325,49): error CS1061: Type `System.ServiceModel.Description.OperationContractGenerationContext' does not contain a definition for `SyncMethod' and no extension method `SyncMethod' of type `System.ServiceModel.Description.OperationContractGenerationContext' could be found (are you missing a using directive or an assembly reference?) ./MonoDevelop.WebReferences/MoonlightChannelBaseExtension.cs(345,115): error CS1061: Type `System.ServiceModel.Description.OperationContractGenerationContext' does not contain a definition for `SyncMethod' and no extension method `SyncMethod' of type `System.ServiceModel.Description.OperationContractGenerationContext' could be found (are you missing a using directive or an assembly reference?) ./MonoDevelop.WebReferences/MoonlightChannelBaseExtension.cs(365,82): error CS1061: Type `System.ServiceModel.Description.OperationContractGenerationContext' does not contain a definition for `BeginMethod' and no extension method `BeginMethod' of type `System.ServiceModel.Description.OperationContractGenerationContext' could be found (are you missing a using directive or an assembly reference?) Compilation failed: 4 error(s), 1 warnings make[4]: *** [../../../build/AddIns/MonoDevelop.WebReferences/MonoDevelop.WebReferences.dll] Error 1 make[4]: Leaving directory `/home/drufat/Desktop/Checkout/mono/monodevelop/main/src/addins/MonoDevelop.WebReferences' make[3]: *** [all-recursive] Error 1 make[3]: Leaving directory `/home/drufat/Desktop/Checkout/mono/monodevelop/main/src/addins' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/home/drufat/Desktop/Checkout/mono/monodevelop/main/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/drufat/Desktop/Checkout/mono/monodevelop/main' make: *** [all-recursive] Error 1 Any ideas on how to fix this? I suppose the build gets mixed up with the default installation of mono in Ubuntu, and is looking for a symbol that is not present there. My build configuration looks as follows: 1. [X] main 2. [ ] extras/JavaBinding 3. [ ] extras/BooBinding 4. [X] extras/ValaBinding 5. [ ] extras/AspNetEdit 6. [ ] extras/GeckoWebBrowser 7. [ ] extras/WebKitWebBrowser 8. [ ] extras/MonoDevelop.Database 9. [ ] extras/MonoDevelop.Profiling 10. [ ] extras/MonoDevelop.AddinAuthoring 11. [ ] extras/MonoDevelop.CodeAnalysis 12. [ ] extras/MonoDevelop.Debugger.Mdb 13. [ ] extras/MonoDevelop.Debugger.Gdb 14. [ ] extras/PyBinding 15. [ ] extras/MonoDevelop.IPhone 16. [ ] extras/MonoDevelop.MeeGo

Read the article

iPhone: Save boolean into Core Data

- by Nic Hubbard

I have set up one of my core data attributes as a Boolean. Now, I need to set it, but XCode keeps telling me that it may not respond to setUseGPS. [ride setUseGPS: useGPS.on]; What is the method for setting a boolean in core data? All my other attributes are set this way, and they work great. So, not sure why a boolean does not work to be set this way?

Read the article

How do I specify an output file name for a compiled ASP.NET application?

- by CSharp Noob

I have read under: Compiling Web Application Projects (http://msdn.microsoft.com/en-us/library/aa983464.aspx) ... this compilation model creates a single assembly, you can specify attributes, such as assembly name and version. You can supply a PATH (directory name only) in the Visual Studio "Build Options". But where can a file name be specified?

Read the article

How can I use django.core.files.File

- by Jake

The docs for django.core.files.File imply I can do this: print File(open(path)).url but the File object has no attribute 'url' However, django.db.models.fields.files.FieldFile extends File and does have all the attributes described in the docs for File, but I can't create one without giving it a model field. All I want it something that does what the docs for django.core.files.File (link above) say it does, take a python file and give it attributes like 'url' and 'path' and 'name', can anyone help? Cheers, Jake

Read the article

ConfigurationManager.AppSettings is empty?

- by Mattousai

Hello All, I have a VS2008 ASP.NET Web Service Application running on the local IIS of my XP machine. A separate project in the same solution uses test methods to invoke the WS calls, and run their processes. When I added a web reference to the WS App, VS2008 created a Settings.settings file in the Properties folder to store the address of the web reference. This process also created a new section in the Web.config file called applicationSettings to store the values from Settings.settings When my application attempts to retrieve configuration values from the appSettings section of the Web.config file, via ConfigurationManager.AppSettings[key], all values are null and AppSettings.AllKeys.Length is always zero. I even reverted the Web.config file to before the web reference was added, and made sure it was exactly the same as a system-generated web.config file for a new project that works fine. After comparing the reverted Web.config and a new Web.config, I addded one simple value in the appSettings section, and still no luck with ConfigurationManager.AppSettings[key]. Here is the reverted Web.config that cannot be read from <?xml version="1.0"?> <configuration> <configSections> <sectionGroup name="system.web.extensions" type="System.Web.Configuration.SystemWebExtensionsSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <sectionGroup name="scripting" type="System.Web.Configuration.ScriptingSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <section name="scriptResourceHandler" type="System.Web.Configuration.ScriptingScriptResourceHandlerSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/> <sectionGroup name="webServices" type="System.Web.Configuration.ScriptingWebServicesSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <section name="jsonSerialization" type="System.Web.Configuration.ScriptingJsonSerializationSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="Everywhere" /> <section name="profileService" type="System.Web.Configuration.ScriptingProfileServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> <section name="authenticationService" type="System.Web.Configuration.ScriptingAuthenticationServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> <section name="roleService" type="System.Web.Configuration.ScriptingRoleServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> </sectionGroup> </sectionGroup> </sectionGroup> </configSections> <appSettings> <add key="testkey" value="testvalue"/> </appSettings> <connectionStrings/> <system.web>  <compilation debug="false"> <assemblies> <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Data.DataSetExtensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add assembly="System.Xml.Linq, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> </assemblies> </compilation>  <authentication mode="Windows" />  <pages> <controls> <add tagPrefix="asp" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add tagPrefix="asp" namespace="System.Web.UI.WebControls" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </controls> </pages> <httpHandlers> <remove verb="*" path="*.asmx"/> <add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add verb="*" path="*_AppService.axd" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" validate="false"/> </httpHandlers> <httpModules> <add name="ScriptModule" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </httpModules> </system.web> <system.codedom> <compilers> <compiler language="c#;cs;csharp" extension=".cs" warningLevel="4" type="Microsoft.CSharp.CSharpCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"> <providerOption name="CompilerVersion" value="v3.5"/> <providerOption name="WarnAsError" value="false"/> </compiler> </compilers> </system.codedom>  <system.webServer> <validation validateIntegratedModeConfiguration="false"/> <modules> <remove name="ScriptModule" /> <add name="ScriptModule" preCondition="managedHandler" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </modules> <handlers> <remove name="WebServiceHandlerFactory-Integrated"/> <remove name="ScriptHandlerFactory" /> <remove name="ScriptHandlerFactoryAppServices" /> <remove name="ScriptResource" /> <add name="ScriptHandlerFactory" verb="*" path="*.asmx" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add name="ScriptHandlerFactoryAppServices" verb="*" path="*_AppService.axd" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add name="ScriptResource" preCondition="integratedMode" verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </handlers> </system.webServer> <runtime> <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1"> <dependentAssembly> <assemblyIdentity name="System.Web.Extensions" publicKeyToken="31bf3856ad364e35"/> <bindingRedirect oldVersion="1.0.0.0-1.1.0.0" newVersion="3.5.0.0"/> </dependentAssembly> <dependentAssembly> <assemblyIdentity name="System.Web.Extensions.Design" publicKeyToken="31bf3856ad364e35"/> <bindingRedirect oldVersion="1.0.0.0-1.1.0.0" newVersion="3.5.0.0"/> </dependentAssembly> </assemblyBinding> </runtime> </configuration> Has anyone experienced this, or know how to solve the problem? TIA -Matt

Read the article

How to inherit from DataAnnotations.ValidationAttribute (it appears SecureCritical under Visual Stud

- by codetuner

Hi, I have an [AllowPartiallyTrustedCallers] class library containing subtypes of the System.DataAnnotations.ValidationAttribute. The library is used on contract types of WCF services. In .NET 2/3.5, this worked fine. Since .NET 4.0 however, running a client of the service in the Visual Studio debugger results in the exception "Inheritance security rules violated by type: '(my subtype of ValidationAttribute)'. Derived types must either match the security accessibility of the base type or be less accessible." (System.TypeLoadException) The error appears to occure only when all of the following conditions are met: a subclass of ValidationAttribute is in an AllowPartiallyTrustedCallers assembly reflection is used to check for the attribute the Visual Studio hosting process is enabled (checkbox on Project properties, Debug tab) So basically, in Visual Studio.NET 2010: create a new Console project, add a reference to "System.ComponentModel.DataAnnotations" 4.0.0.0, write the following code: . using System; [assembly: System.Security.AllowPartiallyTrustedCallers()] namespace TestingVaidationAttributeSecurity { public class MyValidationAttribute : System.ComponentModel.DataAnnotations.ValidationAttribute { } [MyValidation] public class FooBar { } class Program { static void Main(string[] args) { Console.WriteLine("ValidationAttribute IsCritical: {0}", typeof(System.ComponentModel.DataAnnotations.ValidationAttribute).IsSecurityCritical); FooBar fb = new FooBar(); fb.GetType().GetCustomAttributes(true); Console.WriteLine("Press enter to end."); Console.ReadLine(); } } } Press F5 and you get the exception ! Press Ctrl-F5 (start without debugging), and it all works fine without exception... The strange thing is that the ValidationAttribute will or will not be securitycritical depending on the way you run the program (F5 or Ctrl+F5). As illustrated by the Console.WriteLine in the above code. But then again, this appear to happen with other attributes (and types?) too. Now the questions... Why do I have this behaviour when inheriting from ValidationAttribute, but not when inheriting from System.Attribute ? (Using Reflector I don't find special settings on the ValidationAttribute class or it's assembly) And what can I do to solve this ? How can I keep MyValidationAttribute inheriting from ValidationAttribute in an AllowPartiallyTrustedCallers assembly without marking it SecurityCritical, still using the new .NET 4 level 2 security model and still have it work using the VS.NET debug host (or other hosts) ?? Thanks a lot! Rudi

Read the article

How to find strong name signature without calling LoadAssembly

- by Todd Kobus

When reading a Windows PE file directly, I can't seem to find the strong name signature of a delay signed assembly. I can get to the CLR Header and read all those entries. Is the information in the MetaData directory specified within the CLR header? If so does anyone have an example of how to read this table? I am not interested in calling SN.exe or loading the assembly.

Read the article

Get an error when trying to set the build version with the AssemblyInfo Task

- by Glenn Slaven

I've added the AssemblyInfo Task reference to my C# project file (VS2008 .NET 3.5), but when I build I get the following error The "AssemblyInfo" task failed unexpectedly. System.ArgumentException: version Parameter name: The specified string is not a valid version number at Microsoft.Build.Extras.Version.ParseVersion(String version) at Microsoft.Build.Extras.AssemblyInfo.Execute() at Microsoft.Build.BuildEngine.TaskEngine.ExecuteInstantiatedTask(EngineProxy engineProxy, ItemBucket bucket, TaskExecutionMode howToExecuteTask, ITask task, Boolean& taskResult) My assemblyinfo file has these two attributes: [assembly: AssemblyVersion("1.0.0.0")] [assembly: AssemblyFileVersion("1.0.0.0")]

Read the article

Register assemblies to GAC using InstallShield

- by Cornel

I have to register multiple assemblies to GAC using InstallSheild and also I need the assemblies to be copied on the INSTALLDIR also. What's the best way to do it? Also I need to call regasm.exe for an assembly; can I do this using InstallShield? I really need a new 'component' for each assembly that has to be registered in GAC?

Read the article

"Official" Way to deploy Assemblies into the GAC?

- by Michael Stum

I just wonder - if I need to deploy an assembly into the GAC, what is the "official" way of doing it? Currently we either manually drag/drop into the c:\windows\assembly folder or we use gacutil.exe. The first way is obviously not the good one (it's manual process after all), and gacutil is part of the SDK and not available per default on production servers. Are there any Microsoft deployment Guidelines?

Read the article

Using GameKit to transfer CoreData data between iPhones, via NSDictionary

- by OscarTheGrouch

I have an application where I would like to exchange information, managed via Core Data, between two iPhones. First turning the Core Data object to an NSDictionary (something very simple that gets turned into NSData to be transferred). My CoreData has 3 string attributes, 2 image attributes that are transformables. I have looked through the NSDictionary API but have not had any luck with it, creating or adding the CoreData information to it. Any help or sample code regarding this would be greatly appreciated.

Read the article

How to Access a decendant object's internal method in C#

- by Giovanni Galbo

I'm trying to access a method that is marked as internal in the parent class (in its own assembly) in an object that inherits from the same parent. Let me explain what I'm trying to do... I want to create Service classes that return IEnumberable with an underlying List to non-Service classes (e.g. the UI) and optionally return an IEnumerable with an underlying IQueryable to other services. I wrote some sample code to demonstrate what I'm trying to accomplish, shown below. The example is not real life, so please remember that when commenting. All services would inherit from something like this (only relevant code shown): public class ServiceBase<T> { protected readonly ObjectContext _context; protected string _setName = String.Empty; public ServiceBase(ObjectContext context) { _context = context; } public IEnumerable<T> GetAll() { return GetAll(false); } //These are not the correct access modifiers.. I want something //that is accessible to children classes AND between descendant classes internal protected IEnumerable<T> GetAll(bool returnQueryable) { var query = _context.CreateQuery<T>(GetSetName()); if(returnQueryable) { return query; } else { return query.ToList(); } } private string GetSetName() { //Some code... return _setName; } } Inherited services would look like this: public class EmployeeService : ServiceBase<Employees> { public EmployeeService(ObjectContext context) : base(context) { } } public class DepartmentService : ServiceBase<Departments> { private readonly EmployeeService _employeeService; public DepartmentService(ObjectContext context, EmployeeService employeeService) : base(context) { _employeeService = employeeService; } public IList<Departments> DoSomethingWithEmployees(string lastName) { //won't work because method with this signature is not visible to this class var emps = _employeeService.GetAll(true); //more code... } } Because the parent class lives is reusable, it would live in a different assembly than the child services. With GetAll(bool returnQueryable) being marked internal, the children would not be able to see each other's GetAll(bool) method, just the public GetAll() method. I know that I can add a new internal GetAll method to each service (or perhaps an intermediary parent class within the same assembly) so that each child service within the assembly can see each other's method; but it seems unnecessary since the functionality is already available in the parent class. For example: internal IEnumerable<Employees> GetAll(bool returnIQueryable) { return base.GetAll(returnIQueryable); } Essentially what I want is for services to be able to access other service methods as IQueryable so that they can further refine the uncommitted results, while everyone else gets plain old lists. Any ideas?

Read the article

How can I tell that ILMerge has been used

- by viggity

I'd like to be able to tell whether or not an assembly is the output/result from using ILMerge on two different assemblies. It doesn't matter how nitty gritty it is, if I have to parse IL, I'm willing to do it. Is there anything that would be indicate that the assembly author used ILMerge?

Read the article

How to get form elements from one form to another form in drupal

- by ugesh.gali

I have two forms in drupal and the form values is stores in DB.The first form contanins some fields related to company by default like id conpany,name etc.The second form consists of attributes .If I add attributes to the second form the attribute field should be visible in first form. Ex If i add loaction or any other field it should visible in first form as location field.

Read the article

How do I avoid the loader lock?

- by Mark0978

We have a managed app, that uses an assembly. That assembly uses some unmanaged C++ code. The Managed C++ code is in a dll, that depends on several other dlls. All of those Dlls are loaded by this code. (We load all the dll's that ImageCore.dll depends on first, so we can tell which ones are missing, otherwise it would just show up as ImageCore.dll failed to load, and the log file would give no clues as to why). class Interop { private const int DONT_RESOLVE_DLL_REFERENCES = 1; private static log4net.ILog log = log4net.LogManager.GetLogger("Imagecore.NET"); [DllImport("kernel32.dll", CharSet = CharSet.Auto, SetLastError = true)] private static extern IntPtr LoadLibraryEx(string fileName, IntPtr dummy, int flags); [DllImport("kernel32.dll", CharSet = CharSet.Auto, SetLastError = true)] private static extern IntPtr FreeLibrary(IntPtr hModule); static private String[] libs = { "log4cplus.dll", "yaz.dll", "zlib1.dll", "libxml2.dll" }; public static void PreloadAssemblies() { for (int i=0; i < libs.Length; ++i) { String libname = libs[i]; IntPtr hModule = LoadLibraryEx(libname, IntPtr.Zero, DONT_RESOLVE_DLL_REFERENCES); if(hModule == IntPtr.Zero) { log.Error("Unable to pre-load '" + libname + "'"); throw new DllNotFoundException("Unable to pre-load '" + libname + "'"); } else { FreeLibrary(hModule); } } IntPtr h = LoadLibraryEx("ImageCore.dll", IntPtr.Zero, 0); if (h == IntPtr.Zero) { throw new DllNotFoundException("Unable to pre-load ImageCore.dll"); } } } And this code is called by public class ImageDoc : IDisposable { static ImageDoc() { ImageHawk.ImageCore.Utility.Interop.PreloadAssemblies(); } ... } Which is static constructor. As near as I can understand it, as soon as we attempt to use an ImageDoc object, the dll that contains that assembly is loaded and as part of that load, the static constructor is called which in turn causes several other DLLs to be loaded as well. What I'm trying to figure out, is how do we defer loading of those DLLs so that we don't run smack dab into this loader lock that is being kicked out because of the static constructor. I've pieced this much together by looking at: http://social.msdn.microsoft.com/Forums/en-US/vsto/thread/dd192d7e-ce92-49ce-beef-3816c88e5a86 http://msdn.microsoft.com/en-us/library/aa290048%28VS.71%29.aspx http://forums.devx.com/showthread.php?t=53529 http://www.yoda.arachsys.com/csharp/beforefieldinit.html But I just can't seem to find a way to get these external DLLs to load without it happening at the point the class is loading. I think I need to get these LoadLibrary calls out of the static constructor, but don't know how to get them called before they are needed (except for how it is done here). I would prefer to not have to put this kind of knowledge of the dlls into every app that uses this assembly. (And I'm not sure that would even fix the problem.... The strange thing is that the exception only appears to be happening while running within the debugger, not while running outside the debugger.

Read the article

Issues loading SWF with External SWF Files - using SWFObject and ExternalInterface

- by wdense51

I'm having issues with loading a SWF that references external SWF files... The main SWF loads fine if the HTML file is in the same folder as all the SWFs using the following code: <script type="text/javascript" src="../js/swfobject.js"></script> <script type="text/javascript"> var flashvars = {}; var params = { allowScriptAccess: "always" }; params.quality = "high"; params.wmode = "transparent"; var attributes = {id:"IDofSWF", name:"IDofSWF"}; swfobject.embedSWF("event_so_js.swf", "flashContent", "700", "400", "7.0.0", false, flashvars, params, attributes);</script> </head> <body> <div id="flashContent"> <object data="event_so_js.swf" name="IDofSWF" id="IDofSWF" type="application/x-shockwave-flash" width="700" height="400"></object></div> But as soon as I move the HTML file out of that folder to the root folder and update the links, it doesn't load correctly - it seems that it's having trouble with the external SWF files. I did have it successfully load one of the external SWF files directly, but it's having trouble with the main SWF. All of the SWF files are in the same folder, so I don't know why it's having issues. Here's the code for the HTML file when it's in the root folder: <script type="text/javascript" src="js/swfobject.js"></script> <script type="text/javascript"> var flashvars = {}; var params = { allowScriptAccess: "always" }; params.quality = "high"; params.wmode = "transparent"; var attributes = {id:"IDofSWF", name:"IDofSWF"}; swfobject.embedSWF("folio/event_so_js.swf", "flashContent", "700", "400", "9.0.0", false, flashvars, params, attributes);</script> </head> <body> <div id="flashContent"> <object data="folio/event_so_js.swf" name="IDofSWF" id="IDofSWF" type="application/x-shockwave-flash" width="700" height="400"></object></div> There is also a link on the page that calls a function in the actionscript using ExternalInterface, so it could be that causing the issues. The code for the link is: <a href="#" onclick="document.getElementById('IDofSWF').clicky()"> Any help would be awesome, because it's really confusing me.

Search Results

Search found 7869 results on 315 pages for 'assembly attributes'.

Page 102/315 | < Previous Page | 98 99 100 101 102 103 104 105 106 107 108 109 | Next Page >

- by Synetech

- by chickenloop

- by John Durrant

- by Quandary

- by Janusz

- by Dave

- by EnToutCas

- by Alex K

- by mkoryak

- by celil

- by Nic Hubbard

- by CSharp Noob

- by Jake

- by Mattousai

- by codetuner

- by Todd Kobus

- by Glenn Slaven

- by Cornel

- by Michael Stum

- by OscarTheGrouch

- by Giovanni Galbo

- by viggity

- by ugesh.gali

- by Mark0978

- by wdense51

< Previous Page | 98 99 100 101 102 103 104 105 106 107 108 109 | Next Page >